rcw: update to revision
426f7a6
This imports following changes:
426f7a6 SECURE BOOT: Add missing RCW's for T4240QDS
756454f SECURE BOOT: Rename the RCW's
7782087 SECURE BOOT: Remove Unwanted RCW's
e93c210 LS1021: Unset BOOT_HO bit in rcw.
4375fc4 t1023rdb: update IFC_MODE to 0x2F for errata A-009138
5cf9bc5 T4240QDS: Add four 1800MHz/Core RCW files for T4240QDS board
cff536a t1023rdb: set RTC=1 to enable GPIO1[14]
a5983f2 T4240RDB: Add one new RCW for T4240RDB board
3a6ae48 ls1021a: fix some serdes settings for SATA
31078e1 ls1021atwr: do not power down PLL which is used by SATA
c6d72e3 t2080qds: rcw: Add eMMC DDR mode RCW
c77415c T104xD4RDB: update SRDS_PLL_REF_CLK_SEL_S1 value
e2c0844 ls1021atwr: add USB 2.0 support
fd0c1df p5020/p5040: NAND Secure Boot RCW added with PBI commands
259d57d t1023rdb: add rcw for t1023rdb board
c3ab906 T1042: Add t1042d4rdb rcw files for serdes protocol 0x86
ae39560 T1040: Add t1040d4rdb rcw files for serdes protocol 0x66
b9d3c22 p3041: NAND Secure Boot RCW added with PBI commands
dc0fad9 t2080rdb: update ddr to 1866MT/s
03c5ee6 t2080: update platform clock to 600MHz
72945fa rcw: ls102xa: merge rcw for lpuart and dcu
6678741 rcw: ls102xa: Adjust the features supported in SD boot
f7a54c1 arm: ls102xa: Increase IO drive strength for LS1021AQDS board
3dd07fa B4860-As-B3: Add two new RCW files
69a041c B4860QDS: Add HWA_CGA_M3_CLK_SEL bits define in b4860.rcwi file
87289d5 ls102xa: rcw: Add QSPI boot RCW for LS1021A TWR board
13bf692 t1024: update FM1_MAC_RAT from 0 to 1
5b94b3e t1024rdb: add new rcw 0x135 and minor update
Also align with the one in meta-fsl-arm layer.
Signed-off-by: Ting Liu <ting.liu@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
