linux-yocto/5.10: qemuppc32: reduce serial shutdown issues
Integrating the following commit(s) to linux-yocto/5.10:
qemuppc32: reduce serial issues seen on shutdown
Richard reported:
We've been seeing a lot of the qemuppc shutdown issue and I decided to
look into it. The really worrying thing looking at the logs locally is the
serial ports are showing irq issues and becoming disabled as nobody would
handle them.
Errors like:
[ 9.194886] irq 36: nobody cared (try booting with the "irqpoll" option)
[ 9.198712] CPU: 0 PID: 127 Comm: bootlogd Not tainted 5.10.30-yocto-standard #1
[ 9.202283] Call Trace:
[ 9.205611] [
d1005f00] [
c00a0da8] __report_bad_irq+0x50/0x138 (unreliable)
[ 9.209347] [
d1005f30] [
c00a0cc0] note_interrupt+0x324/0x378
[ 9.212855] [
d1005f70] [
c009d138] handle_irq_event+0xe8/0x104
[ 9.216353] [
d1005fa0] [
c00a1d9c] handle_fasteoi_irq+0xc0/0x29c
[ 9.219960] [
d1005fc0] [
c009b798] generic_handle_irq+0x40/0x5c
[ 9.223496] [
d1005fd0] [
c00075d0] __do_irq+0x58/0x188
[ 9.226948] [
d1005ff0] [
c0010040] call_do_irq+0x20/0x38
[ 9.230391] [
d29eda60] [
c0007788] do_IRQ+0x88/0xfc
[ 9.233860] [
d29eda90] [
c0016454] ret_from_except+0x0/0x14
[ 9.237288] --- interrupt: 501 at __setup_irq+0x3c4/0x838
[ 9.237288] LR = __setup_irq+0x790/0x838
[ 9.244155] [
d29edb88] [
c009f0a4] request_threaded_irq+0x114/0x1c8
[ 9.247672] [
d29edbb8] [
c07a5a18] pmz_startup+0x17c/0x32c
[ 9.251203] [
d29edbd8] [
c07a1140] uart_port_startup+0x184/0x2f8
[ 9.254651] [
d29edc08] [
c07a1974] uart_port_activate+0x78/0xf4
[ 9.258141] [
d29edc28] [
c07839f8] tty_port_open+0xd4/0x170
[ 9.261579] [
d29edc58] [
c079db74] uart_open+0x2c/0x48
[ 9.265116] [
d29edc68] [
c077a288] tty_open+0x168/0x640
[ 9.268574] [
d29edcd8] [
c0280be8] chrdev_open+0x138/0x2a4
[ 9.272123] [
d29edd18] [
c027421c] do_dentry_open+0x228/0x410
[ 9.275643] [
d29edd48] [
c028e9f4] path_openat+0xb04/0xf28
[ 9.279184] [
d29eddd8] [
c02917e4] do_filp_open+0x120/0x164
[ 9.282535] [
d29ede98] [
c0276238] do_sys_openat2+0xd8/0x19c
[ 9.285790] [
d29edee8] [
c0276574] sys_openat+0x88/0xdc
[ 9.289096] [
d29edf38] [
c00160d8] ret_from_syscall+0x0/0x34
[ 9.292620] --- interrupt: c01 at 0xfec3738
[ 9.292620] LR = 0xfec36e0
[ 9.299035] handlers:
[ 9.302312] [<
7f7f7da8>] pmz_interrupt
[ 9.305541] Disabling IRQ #36
(and the irqpoll option does not help)
This is problematic as the shutdown test uses the serial interface to
shut down the system. If the serial interface fails to login or run the command,
game over for the test.
CONFIG_SERIAL_PMACZILOG_CONSOLE complicates that handling, but doesn't provide
any output or capabilities that we need. So we disable it here, and
reduce the chances of issues during shutdown.
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit
bf2c6ea03d45742597275691b4c883044765c57e)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
