cm-x270.conf: Remove touchscreen from machine features list. Default to the W model...

git-svn-id: https://svn.o-hand.com/repos/poky/trunk@3807 311d38ba-8fff-0310-9ca6-ca027cbcb966

diff --git a/meta/conf/machine/cm-x270.conf b/meta/conf/machine/cm-x270.conf
index 1b6188753e8564b536c87fa95da51520c5687e5d..226942de73ac507e0073d853e10871f9a2435983 100644 (file)
--- a/meta/conf/machine/cm-x270.conf
+++ b/meta/conf/machine/cm-x270.conf
@@ -12,10 +12,12 @@ PACKAGE_EXTRA_ARCHS = "armv4 armv4t armv5te iwmmxt"
 
 require conf/machine/include/tune-xscale.inc
 
-# console serial port.  If you have a L module
-# the below works.  If you have a W module, add
+# Console serial port. 
+# If you have a W module, add the following line to your local.conf:
 # the following line to your local.conf:
-#   CMX270_CONSOLE_SERIAL_PORT = "ttyS0"
+CMX270_CONSOLE_SERIAL_PORT ?= "ttyS0"
+# the following is for the cm-x270 L module
+#CMX270_CONSOLE_SERIAL_PORT ?= "ttyS1"
 
 # NAND flash eraseblock size
 # most of the older cm-x270 modules are populated with NAND flash
@@ -24,8 +26,6 @@ require conf/machine/include/tune-xscale.inc
 # can be overridden in local.conf if you have one of these devices.
 CMX270_NAND_ERASEBLOCK_SIZE ?= "0x20000"
 
-# the following is for the cm-x270 L module
-CMX270_CONSOLE_SERIAL_PORT ?= "ttyS1"
 
 # used by sysvinit_2 package, so rebuild this
 # package if you change the SERIAL_CONSOLE setting
@@ -48,7 +48,7 @@ EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=${CMX270_NAND_ERASEBLOCK_SI
        ln -s ${IMAGE_NAME}.rootfs-summary.jffs2 ${IMAGE_LINK_NAME}.rootfs-summary.jffs2 \
        "
 
-MACHINE_FEATURES = "kernel26 pcmcia usbhost usbgadget pcmcia touchscreen alsa iwmmxt"
+MACHINE_FEATURES = "kernel26 pcmcia usbhost usbgadget pcmcia alsa iwmmxt"
 
 # to program the compulab NAND flash, the following scheme is suggested.  Create
 # a small rootfs that can fit in NOR flash using the following config: