imx8dx-mek: Rework 8DXP MEK to use common MEK include

Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>

diff --git a/conf/machine/imx8dx-mek.conf b/conf/machine/imx8dx-mek.conf
new file mode 100644 (file)
index 0000000..842ba1f
--- /dev/null
+++ b/conf/machine/imx8dx-mek.conf
@@ -0,0 +1,12 @@
+#@TYPE: Machine
+#@NAME: i.MX 8DXP MEK
+#@DESCRIPTION: i.MX 8DualXPlus Multisensory Enablement Kit board
+#@MAINTAINER: Lauren Post <lauren.post@nxp.com>
+
+MACHINEOVERRIDES =. "mx8qxp:mx8dx:"
+
+require include/imx8x-mek.inc
+
+KERNEL_DEVICETREE_BASENAME = "${MACHINE}"
+
+UBOOT_CONFIG_BASENAME = "imx8dx_mek"

diff --git a/conf/machine/imx8dxmek.conf b/conf/machine/imx8dxmek.conf
deleted file mode 100644 (file)
index 16eb4e5..0000000
--- a/conf/machine/imx8dxmek.conf
+++ /dev/null
@@ -1,73 +0,0 @@
-#@TYPE: Machine
-#@NAME: i.MX 8DX MEK
-#@DESCRIPTION: i.MX 8DX Multisensory Enablement Kit (MEK) board
-#@MAINTAINER: Lauren Post <lauren.post@nxp.com>
-
-MACHINEOVERRIDES =. "mx8:mx8x:mx8qxp:mx8dx:"
-
-require conf/machine/include/imx-base.inc
-require conf/machine/include/tune-cortexa35.inc
-
-IMX_DEFAULT_BSP = "nxp"
-
-MACHINE_FEATURES += "pci optee bcm43455 bcm4356"
-MACHINE_FEATURES_append_use-nxp-bsp = " bcm4359"
-
-# Don't include kernels in standard images
-RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
-
-LOADADDR = ""
-
-# We have to disable SERIAL_CONSOLE due to auto-serial-console
-SERIAL_CONSOLES = "115200;ttyAMA0"
-
-# we do not want to have getty running on tty1 as we run
-# auto-serial-console there
-USE_VT = "0"
-
-KERNEL_DEVICETREE = "freescale/imx8dx-mek.dtb"
-KERNEL_DEVICETREE_append_use-nxp-bsp = " \
-    freescale/imx8dx-mek-dsi-rm67191.dtb \
-    freescale/imx8dx-mek-dsi-rm67191-rpmsg.dtb \
-    freescale/imx8dx-mek-dsp.dtb \
-    freescale/imx8dx-mek-enet2-tja1100.dtb \
-    freescale/imx8dx-mek-it6263-lvds0-dual-channel.dtb \
-    freescale/imx8dx-mek-it6263-lvds0-dual-channel-rpmsg.dtb \
-    freescale/imx8dx-mek-it6263-lvds1-dual-channel.dtb \
-    freescale/imx8dx-mek-it6263-lvds1-dual-channel-rpmsg.dtb \
-    freescale/imx8dx-mek-jdi-wuxga-lvds0-panel.dtb \
-    freescale/imx8dx-mek-jdi-wuxga-lvds0-panel-rpmsg.dtb \
-    freescale/imx8dx-mek-jdi-wuxga-lvds1-panel.dtb \
-    freescale/imx8dx-mek-jdi-wuxga-lvds1-panel-rpmsg.dtb \
-    freescale/imx8dx-mek-ov5640.dtb \
-    freescale/imx8dx-mek-ov5640-rpmsg.dtb \
-    freescale/imx8dx-mek-rpmsg.dtb \
-"
-
-UBOOT_MAKE_TARGET = \
-    "${@bb.utils.contains('MACHINE_FEATURES', 'optee', '', \
-                                                       'u-boot.bin', d)}"
-SPL_BINARY = \
-    "${@bb.utils.contains('MACHINE_FEATURES', 'optee', 'spl/u-boot-spl.bin', \
-                                                       '', d)}"
-
-UBOOT_CONFIG ??= "sd"
-UBOOT_CONFIG[sd]   = "imx8dx_mek_config,sdcard"
-UBOOT_CONFIG[fspi] = "imx8dx_mek_fspi_defconfig"
-
-IMX_BOOT_SEEK = "32"
-
-IMXBOOT_TARGETS_SD = \
-    "${@bb.utils.contains('MACHINE_FEATURES', 'optee', 'flash_spl', \
-                                                       'flash', d)}"
-IMXBOOT_TARGETS_FSPI = \
-    "${@bb.utils.contains('MACHINE_FEATURES', 'optee', 'flash_spl_flexspi', \
-                                                       'flash_flexspi', d)}"
-IMXBOOT_TARGETS = \
-    "${@bb.utils.contains('UBOOT_CONFIG',        'sd', '${IMXBOOT_TARGETS_SD}', \
-                                                       '${IMXBOOT_TARGETS_FSPI}', d)}"
-
-BOARD_TYPE = "mek"
-
-# Add additional firmware
-MACHINE_FIRMWARE_append = " linux-firmware-ath10k"