+++ /dev/null
-Index: udev-092/udev_libc_wrapper.h
-===================================================================
---- udev-092.orig/udev_libc_wrapper.h 2006-07-26 21:55:06.000000000 +0100
-+++ udev-092/udev_libc_wrapper.h 2006-07-26 21:55:37.000000000 +0100
-@@ -58,9 +58,9 @@
- # define __NR_inotify_add_watch 152
- # define __NR_inotify_rm_watch 156
- #elif defined (__arm__)
--# define __NR_inotify_init 316
--# define __NR_inotify_add_watch 317
--# define __NR_inotify_rm_watch 318
-+# define __NR_inotify_init __NR_SYSCALL_BASE+316
-+# define __NR_inotify_add_watch __NR_SYSCALL_BASE+317
-+# define __NR_inotify_rm_watch __NR_SYSCALL_BASE+318
- #elif defined (__sh__)
- # define __NR_inotify_init 290
- # define __NR_inotify_add_watch 291
+++ /dev/null
---- udev-089/Makefile.orig 2006-04-08 13:32:53.000000000 +0200
-+++ udev-089/Makefile 2006-04-08 13:34:27.000000000 +0200
-@@ -117,28 +117,28 @@
- AR = $(CROSS_COMPILE)ar
- RANLIB = $(CROSS_COMPILE)ranlib
-
--CFLAGS = -g -Wall -pipe -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64
-+override CFLAGS = -g -Wall -pipe -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64
- WARNINGS = -Wstrict-prototypes -Wsign-compare -Wshadow \
- -Wchar-subscripts -Wmissing-declarations -Wnested-externs \
- -Wpointer-arith -Wcast-align -Wsign-compare -Wmissing-prototypes
--CFLAGS += $(WARNINGS)
-+override CFLAGS += $(WARNINGS)
-
- LDFLAGS = -Wl,-warn-common
-
- OPTFLAGS = -Os
--CFLAGS += $(OPTFLAGS)
-+override CFLAGS += $(OPTFLAGS)
-
- ifeq ($(strip $(USE_LOG)),true)
-- CFLAGS += -DUSE_LOG
-+ override CFLAGS += -DUSE_LOG
- endif
-
- # if DEBUG is enabled, then we do not strip
- ifeq ($(strip $(DEBUG)),true)
-- CFLAGS += -DDEBUG
-+ override CFLAGS += -DDEBUG
- endif
-
- ifeq ($(strip $(USE_GCOV)),true)
-- CFLAGS += -fprofile-arcs -ftest-coverage
-+ override CFLAGS += -fprofile-arcs -ftest-coverage
- LDFLAGS += -fprofile-arcs
- endif
-
-@@ -151,11 +151,11 @@
- ifeq ($(strip $(USE_SELINUX)),true)
- UDEV_OBJS += udev_selinux.o
- LIB_OBJS += -lselinux -lsepol
-- CFLAGS += -DUSE_SELINUX
-+ override CFLAGS += -DUSE_SELINUX
- endif
-
- ifeq ($(strip $(USE_STATIC)),true)
-- CFLAGS += -DUSE_STATIC
-+ override CFLAGS += -DUSE_STATIC
- LDFLAGS += -static
- endif
-
+++ /dev/null
-#!/bin/sh -e
-### BEGIN INIT INFO
-# Provides: udev
-# Required-Start: mountvirtfs
-# Required-Stop:
-# Default-Start: S
-# Default-Stop:
-# Short-Description: Start udevd, populate /dev and load drivers.
-### END INIT INFO
-
-# we need to unmount /dev/pts/ and remount it later over the tmpfs
-unmount_devpts() {
- if mountpoint -q /dev/pts/; then
- umount -l /dev/pts/
- fi
-
- if mountpoint -q /dev/shm/; then
- umount -l /dev/shm/
- fi
-}
-
-# mount a tmpfs over /dev, if somebody did not already do it
-mount_tmpfs() {
- if grep -E -q "^[^[:space:]]+ /dev tmpfs" /proc/mounts; then
- return
- fi
-
- # /dev/.static/dev/ is used by MAKEDEV to access the real /dev/ directory.
- # /etc/udev/ is recycled as a temporary mount point because it's the only
- # directory which is guaranteed to be available.
- mount -n -o bind /dev /etc/udev
-
- if ! mount -n -o size=$tmpfs_size,mode=0755 -t tmpfs tmpfs /dev; then
- umount /etc/udev
- echo "udev requires tmpfs support, not started."
- exit 1
- fi
-
- mkdir -p /dev/.static/dev
- chmod 700 /dev/.static/
- # The mount options in busybox are non-standard...
- if test -x /bin/mount.util-linux
- then
- /bin/mount.util-linux --move /etc/udev /dev/.static/dev
- elif test -x /bin/busybox
- then
- busybox mount -n -o move /etc/udev /dev/.static/dev
- else
- echo "udev requires an identifiable mount command, not started."
- umount /etc/udev
- umount /dev
- exit 1
- fi
-}
-
-# I hate this hack. -- Md
-make_extra_nodes() {
- if [ "$(echo /lib/udev/devices/*)" != "/lib/udev/devices/*" ]; then
- cp -a /lib/udev/devices/* /dev/
- fi
-
- [ -e /etc/udev/links.conf ] || return 0
- grep '^[^#]' /etc/udev/links.conf | \
- while read type name arg1; do
- [ "$type" -a "$name" -a ! -e "/dev/$name" -a ! -L "/dev/$name" ] ||continue
- case "$type" in
- L) ln -s $arg1 /dev/$name ;;
- D) mkdir -p /dev/$name ;;
- M) mknod -m 600 /dev/$name $arg1 ;;
- *) echo "links.conf: unparseable line ($type $name $arg1)" ;;
- esac
- done
-}
-
-supported_kernel() {
- case "$(uname -r)" in
- 2.[012345].*|2.6.[0-9]|2.6.[0-9][!0-9]*) return 1 ;;
- 2.6.1[01]|2.6.1[01][!0-9]*) return 1 ;;
- esac
- return 0
-}
-
-set_hotplug_handler() {
- case "$(uname -r)" in
- 2.6.1[0-4]|2.6.1[0-4][!0-9]*) HANDLER='/sbin/udevsend' ;;
- esac
- echo $HANDLER > /proc/sys/kernel/hotplug
-}
-
-# shell version of /usr/bin/tty
-my_tty() {
- [ -x /bin/readlink ] || return 0
- [ -e /proc/self/fd/0 ] || return 0
- readlink --silent /proc/self/fd/0 || true
-}
-
-warn_if_interactive() {
- if [ "$RUNLEVEL" = "S" -a "$PREVLEVEL" = "N" ]; then
- return
- fi
-
- TTY=$(my_tty)
- if [ -z "$TTY" -o "$TTY" = "/dev/console" ]; then
- return
- fi
-
- printf "\n\n\nIt has been detected that the command\n\n\t$0 $*\n\n"
- printf "has been run from an interactive shell.\n"
- printf "It will probably not do what you expect, so this script will wait\n"
- printf "60 seconds before continuing. Press ^C to stop it.\n"
- printf "RUNNING THIS COMMAND IS HIGHLY DISCOURAGED!\n\n\n\n"
- sleep 60
-}
-
-##############################################################################
-
-PATH="/sbin:/bin:/usr/bin"
-
-[ -x /sbin/udevd ] || exit 0
-
-# defaults
-tmpfs_size="10M"
-udev_root="/dev"
-udevd_timeout=30
-
-. /etc/udev/udev.conf
-
-if ! supported_kernel; then
- echo "udev requires a kernel >= 2.6.12, not started."
- exit 1
-fi
-
-if [ ! -e /proc/filesystems ]; then
- echo "udev requires a mounted procfs, not started."
- exit 1
-fi
-
-if ! grep -q '[[:space:]]tmpfs$' /proc/filesystems; then
- echo "udev requires tmpfs support, not started."
- exit 1
-fi
-
-if [ ! -d /sys/class/ ]; then
- echo "udev requires a mounted sysfs, not started."
- exit 1
-fi
-
-if [ ! -e /proc/sys/kernel/hotplug ]; then
- echo "udev requires hotplug support, not started."
- exit 1
-fi
-
-##############################################################################
-
-# When modifying this script, do not forget that between the time that
-# the new /dev has been mounted and udevsynthesize has been run there will be
-# no /dev/null. This also means that you cannot use the "&" shell command.
-
-case "$1" in
- start)
- if [ -e "$udev_root/.udev/" ]; then
- if mountpoint -q /dev/; then
- TMPFS_MOUNTED=1
- else
- echo ".udev/ already exists on the static $udev_root!"
- fi
- else
- warn_if_interactive
- fi
-
- echo "Starting the hotplug events dispatcher" "udevd"
- udevd --daemon
-
- set_hotplug_handler
-
- if [ -z "$TMPFS_MOUNTED" ]; then
- unmount_devpts
- mount_tmpfs
- [ -d /proc/1 ] || mount -n /proc
- fi
-
- # if this directory is not present /dev will not be updated by udev
- mkdir -p /dev/.udev/ /dev/.udev/db/ /dev/.udev/queue/ /dev/.udevdb/
- # /dev/null must be created before udevd is started
- make_extra_nodes
-
- echo "Synthesizing the initial hotplug events"
- udevsynthesize
-
- # wait for the udevd childs to finish
- echo "Waiting for /dev to be fully populated"
- while [ -d /dev/.udev/queue/ ]; do
- sleep 1
- udevd_timeout=$(($udevd_timeout - 1))
- if [ $udevd_timeout -eq 0 ]; then
- # ps axf
- break
- fi
- done
- if [ $udevd_timeout -eq 0 ]; then
- echo 'timeout'
- fi
- ;;
-
- stop)
- echo "Stopping the hotplug events dispatcher" "udevd"
- start-stop-daemon --stop --name udevd --quiet
- ;;
-
- restart|force-reload)
- echo "Stopping the hotplug events dispatcher" "udevd"
- if start-stop-daemon --stop --name udevd --quiet ; then
- exit 1
- fi
-
- echo "Starting the hotplug events dispatcher" "udevd"
- udevd --daemon
- ;;
-
- *)
- echo "Usage: /etc/init.d/udev {start|stop|restart|force-reload}"
- exit 1
- ;;
-esac
-
-exit 0
-
+++ /dev/null
-# There are a number of modifiers that are allowed to be used in some
-# of the different fields. They provide the following subsitutions:
-#
-# %n the "kernel number" of the device.
-# For example, 'sda3' has a "kernel number" of '3'
-# %e the smallest number for that name which does not matches an existing node
-# %k the kernel name for the device
-# %M the kernel major number for the device
-# %m the kernel minor number for the device
-# %b the bus id for the device
-# %c the string returned by the PROGRAM
-# %s{filename} the content of a sysfs attribute
-# %% the '%' char itself
-#
-
-# Media automounting
-SUBSYSTEM=="block", ACTION=="add" RUN+="/etc/udev/scripts/mount.sh"
-SUBSYSTEM=="block", ACTION=="remove" RUN+="/etc/udev/scripts/mount.sh"
-
-# Handle network interface setup
-SUBSYSTEM=="net", ACTION=="add" RUN+="/etc/udev/scripts/network.sh"
-SUBSYSTEM=="net", ACTION=="remove" RUN+="/etc/udev/scripts/network.sh"
-
-# The first rtc device is symlinked to /dev/rtc
-KERNEL=="rtc0", SYMLINK+="rtc"
-
-# Try and modprobe for drivers for new hardware
-ACTION=="add", DEVPATH=="/devices/*", ENV{MODALIAS}=="?*", RUN+="/sbin/modprobe $env{MODALIAS}"
-
-# Create a symlink to any touchscreen input device
-SUBSYSTEM=="input", KERNEL=="event[0-9]*", SYSFS{modalias}=="input:*-e0*,3,*a0,1,*18,*", SYMLINK+="input/touchscreen0"
+++ /dev/null
-ACTION!="add", GOTO="permissions_end"
-
-# workarounds needed to synchronize with sysfs
-DEVPATH=="/devices/*", ENV{PHYSDEVBUS}=="?*", WAIT_FOR_SYSFS="bus"
-SUBSYSTEM=="scsi", WAIT_FOR_SYSFS="ioerr_cnt"
-# only needed for kernels < 2.6.16
-SUBSYSTEM=="net", WAIT_FOR_SYSFS="address"
-# only needed for kernels < 2.6.17
-SUBSYSTEM=="net", ENV{PHYSDEVDRIVER}=="?*", WAIT_FOR_SYSFS="device/driver"
-
-# default permissions for block devices
-SUBSYSTEM=="block", GROUP="disk"
-SUBSYSTEM=="block", SYSFS{removable}=="1", GROUP="floppy"
-
-# IDE devices
-BUS=="ide", KERNEL=="hd[a-z]|pcd[0-9]*", DRIVER=="ide-cdrom|pcd", \
- IMPORT{program}="cdrom_id --export $tempnode"
-ENV{ID_CDROM}=="?*", GROUP="cdrom"
-BUS=="ide", KERNEL=="ht[0-9]*", GROUP="tape"
-BUS=="ide", KERNEL=="nht[0-9]*", GROUP="tape"
-
-# SCSI devices
-BUS=="scsi", SYSFS{type}=="1", GROUP="tape"
-BUS=="scsi", SYSFS{type}=="3", SYSFS{vendor}=="HP", GROUP="scanner"
-BUS=="scsi", SYSFS{type}=="5", GROUP="cdrom"
-BUS=="scsi", SYSFS{type}=="6", GROUP="scanner"
-
-# USB devices
-BUS=="usb", KERNEL=="legousbtower*", MODE="0666"
-BUS=="usb", KERNEL=="lp[0-9]*", GROUP="lp"
-
-# usbfs-like devices
-SUBSYSTEM=="usb_device", MODE="0664"
-
-# iRiver music players
-SUBSYSTEM=="usb_device", GROUP="plugdev", \
- SYSFS{idVendor}=="4102", SYSFS{idProduct}=="10[01][135789]"
-
-# serial devices
-SUBSYSTEM=="tty", GROUP="dialout"
-SUBSYSTEM=="capi", GROUP="dialout"
-SUBSYSTEM=="slamr", GROUP="dialout"
-SUBSYSTEM=="zaptel", GROUP="dialout"
-
-# vc devices (all members of the tty subsystem)
-KERNEL=="ptmx", MODE="0666", GROUP="root"
-KERNEL=="console", MODE="0600", GROUP="root"
-KERNEL=="tty", MODE="0666", GROUP="root"
-KERNEL=="tty[0-9]*", GROUP="root"
-KERNEL=="pty*", MODE="0666", GROUP="tty"
-
-# video devices
-SUBSYSTEM=="video4linux", GROUP="video"
-SUBSYSTEM=="drm", GROUP="video"
-SUBSYSTEM=="dvb", GROUP="video"
-SUBSYSTEM=="em8300", GROUP="video"
-SUBSYSTEM=="graphics", GROUP="video"
-SUBSYSTEM=="nvidia", GROUP="video"
-
-# misc devices
-KERNEL=="random", MODE="0666"
-KERNEL=="urandom", MODE="0666"
-KERNEL=="mem", MODE="0640", GROUP="kmem"
-KERNEL=="kmem", MODE="0640", GROUP="kmem"
-KERNEL=="port", MODE="0640", GROUP="kmem"
-KERNEL=="full", MODE="0666"
-KERNEL=="null", MODE="0666"
-KERNEL=="zero", MODE="0666"
-KERNEL=="inotify", MODE="0666"
-KERNEL=="sgi_fetchop", MODE="0666"
-KERNEL=="sonypi", MODE="0666"
-KERNEL=="agpgart", GROUP="video"
-KERNEL=="nvram", GROUP="nvram"
-KERNEL=="rtc", GROUP="audio"
-KERNEL=="tpm*", MODE="0600", OWNER="tss", GROUP="tss"
-KERNEL=="fuse", GROUP="fuse"
-
-KERNEL=="cdemu[0-9]*", GROUP="cdrom"
-KERNEL=="pktcdvd[0-9]*", GROUP="cdrom"
-KERNEL=="pktcdvd", MODE="0644"
-
-KERNEL=="uverbs*", GROUP="rdma"
-KERNEL=="ucm*", GROUP="rdma"
-
-# printers and parallel devices
-SUBSYSTEM=="printer", GROUP="lp"
-SUBSYSTEM=="ppdev", GROUP="lp"
-KERNEL=="pt[0-9]*", GROUP="tape"
-KERNEL=="pht[0-9]*", GROUP="tape"
-
-# sound devices
-SUBSYSTEM=="sound", GROUP="audio"
-
-# ieee1394 devices
-KERNEL=="raw1394", GROUP="disk"
-KERNEL=="dv1394*", GROUP="video"
-KERNEL=="video1394*", GROUP="video"
-
-# input devices
-KERNEL=="event[0-9]*", SYSFS{name}=="*dvb*|*DVB*|* IR *" \
- MODE="0664", GROUP="video"
-KERNEL=="js[0-9]*", MODE="0664"
-
-# AOE character devices
-SUBSYSTEM=="aoe", MODE="0220", GROUP="disk"
-SUBSYSTEM=="aoe", KERNEL=="err", MODE="0440"
-
-LABEL="permissions_end"
-
+++ /dev/null
-# There are a number of modifiers that are allowed to be used in some
-# of the different fields. They provide the following subsitutions:
-#
-# %n the "kernel number" of the device.
-# For example, 'sda3' has a "kernel number" of '3'
-# %e the smallest number for that name which does not matches an existing node
-# %k the kernel name for the device
-# %M the kernel major number for the device
-# %m the kernel minor number for the device
-# %b the bus id for the device
-# %c the string returned by the PROGRAM
-# %s{filename} the content of a sysfs attribute
-# %% the '%' char itself
-#
-
-# SCSI devices
-BUS=="scsi", KERNEL=="sr[0-9]*", NAME="scd%n", SYMLINK+="sr%n"
-
-# USB devices
-BUS=="usb", KERNEL=="auer[0-9]*", NAME="usb/%k"
-BUS=="usb", KERNEL=="cpad[0-9]*", NAME="usb/%k"
-BUS=="usb", KERNEL=="dabusb*", NAME="usb/%k"
-BUS=="usb", KERNEL=="hiddev*", NAME="usb/%k"
-BUS=="usb", KERNEL=="legousbtower*", NAME="usb/%k"
-BUS=="usb", KERNEL=="lp[0-9]*", NAME="usb/%k"
-BUS=="usb", KERNEL=="ttyUSB*", SYSFS{product}=="Palm Handheld*", \
- SYMLINK+="pilot"
-
-# usbfs-like devices
-SUBSYSTEM=="usb_device", \
- PROGRAM="/bin/sh -c 'export X=%k; export X=$${X#usbdev}; export B=$${X%%%%.*}; export D=$${X#*.}; echo bus/usb/$$B/$$D'", SYMLINK+="%c"
-
-# serial devices
-KERNEL=="capi", NAME="capi20", SYMLINK+="isdn/capi20"
-KERNEL=="capi[0-9]*", NAME="capi/%n"
-
-# video devices
-KERNEL=="card[0-9]*", NAME="dri/%k"
-
-# misc devices
-KERNEL=="hw_random", NAME="hwrng"
-KERNEL=="tun", NAME="net/%k"
-
-KERNEL=="cdemu[0-9]*", NAME="cdemu/%n"
-KERNEL=="pktcdvd[0-9]*", NAME="pktcdvd/%n"
-KERNEL=="pktcdvd", NAME="pktcdvd/control"
-
-KERNEL=="cpu[0-9]*", NAME="cpu/%n/cpuid"
-KERNEL=="msr[0-9]*", NAME="cpu/%n/msr"
-KERNEL=="microcode", NAME="cpu/microcode"
-
-KERNEL=="umad*", NAME="infiniband/%k"
-KERNEL=="issm*", NAME="infiniband/%k"
-KERNEL=="uverbs*", NAME="infiniband/%k"
-KERNEL=="ucm", NAME="infiniband/%k"
-
-KERNEL=="buzzer", NAME="misc/buzzer"
-
-# ALSA devices
-KERNEL=="controlC[0-9]*", NAME="snd/%k"
-KERNEL=="hwC[D0-9]*", NAME="snd/%k"
-KERNEL=="pcmC[D0-9cp]*", NAME="snd/%k"
-KERNEL=="midiC[D0-9]*", NAME="snd/%k"
-KERNEL=="timer", NAME="snd/%k"
-KERNEL=="seq", NAME="snd/%k"
-
-# ieee1394 devices
-KERNEL=="dv1394*", NAME="dv1394/%n"
-KERNEL=="video1394*", NAME="video1394/%n"
-
-# input devices
-KERNEL=="mice", NAME="input/%k"
-KERNEL=="mouse[0-9]*", NAME="input/%k"
-KERNEL=="event[0-9]*", NAME="input/%k"
-KERNEL=="js[0-9]*", NAME="input/%k"
-KERNEL=="ts[0-9]*", NAME="input/%k"
-KERNEL=="uinput", NAME="input/%k"
-
-# Zaptel
-KERNEL=="zapctl", NAME="zap/ctl"
-KERNEL=="zaptimer", NAME="zap/timer"
-KERNEL=="zapchannel", NAME="zap/channel"
-KERNEL=="zappseudo", NAME="zap/pseudo"
-KERNEL=="zap[0-9]*", NAME="zap/%n"
-
-# AOE character devices
-SUBSYSTEM=="aoe", KERNEL=="discover", NAME="etherd/%k"
-SUBSYSTEM=="aoe", KERNEL=="err", NAME="etherd/%k"
-SUBSYSTEM=="aoe", KERNEL=="interfaces", NAME="etherd/%k"
-
-# device mapper creates its own device nodes, so ignore these
-KERNEL=="dm-[0-9]*", OPTIONS+="ignore_device"
-KERNEL=="device-mapper", NAME="mapper/control"
-
-KERNEL=="rfcomm[0-9]*", NAME="%k", GROUP="users", MODE="0660"
-
-# Firmware Helper
-ACTION=="add", SUBSYSTEM=="firmware", RUN+="/lib/udev/firmware_helper"
-
-# Samsung UARTS
-KERNEL=="s3c2410_serial[0-9]", NAME="ttySAC%n"
-
+++ /dev/null
----
- Makefile | 16 ++++++++--------
- 1 file changed, 8 insertions(+), 8 deletions(-)
-
-Index: udev-115/Makefile
-===================================================================
---- udev-115.orig/Makefile 2007-08-24 01:29:54.000000000 +0200
-+++ udev-115/Makefile 2007-09-20 17:21:45.000000000 +0200
-@@ -112,39 +112,39 @@
- AR = $(CROSS_COMPILE)ar
- RANLIB = $(CROSS_COMPILE)ranlib
-
--CFLAGS += -g -Wall -pipe -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64
-+override CFLAGS = -g -Wall -pipe -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64
- WARNINGS = -Wstrict-prototypes -Wsign-compare -Wshadow \
- -Wchar-subscripts -Wmissing-declarations -Wnested-externs \
- -Wpointer-arith -Wcast-align -Wsign-compare -Wmissing-prototypes
--CFLAGS += $(WARNINGS)
-+override CFLAGS += $(WARNINGS)
-
- LDFLAGS += -Wl,-warn-common,--as-needed
-
- OPTFLAGS = -Os
--CFLAGS += $(OPTFLAGS)
-+override CFLAGS += $(OPTFLAGS)
-
- ifeq ($(strip $(USE_LOG)),true)
-- CFLAGS += -DUSE_LOG
-+ override CFLAGS += -DUSE_LOG
- endif
-
- # if DEBUG is enabled, then we do not strip
- ifeq ($(strip $(DEBUG)),true)
-- CFLAGS += -DDEBUG
-+ override CFLAGS += -DDEBUG
- endif
-
- ifeq ($(strip $(USE_GCOV)),true)
-- CFLAGS += -fprofile-arcs -ftest-coverage
-+ override CFLAGS += -fprofile-arcs -ftest-coverage
- LDFLAGS += -fprofile-arcs
- endif
-
- ifeq ($(strip $(USE_SELINUX)),true)
- UDEV_OBJS += udev_selinux.o
- LIB_OBJS += -lselinux -lsepol
-- CFLAGS += -DUSE_SELINUX
-+ override CFLAGS += -DUSE_SELINUX
- endif
-
- ifeq ($(strip $(USE_STATIC)),true)
-- CFLAGS += -DUSE_STATIC
-+ override CFLAGS += -DUSE_STATIC
- LDFLAGS += -static
- endif
-
+++ /dev/null
-export TZ=/etc/localtime
-
-[ -d /sys/class ] || exit 1
-[ -r /proc/mounts ] || exit 1
-[ -x /sbin/udevd ] || exit 1
-[ -f /etc/udev/udev.conf ] && . /etc/udev/udev.conf
-
-kill_udevd() {
- if [ -x /sbin/pidof ]; then
- pid=`/sbin/pidof -x udevd`
- [ -n "$pid" ] && kill $pid
- fi
-}
-
-export ACTION=add
-# propagate /dev from /sys
-echo -n "Starting udev"
-
-# mount the tmpfs on /dev, if not already done
-LANG=C awk "\$2 == \"/dev\" && \$4 == \"tmpfs\" { exit 1 }" /proc/mounts && {
- mount -n -o mode=0755 -t tmpfs none "/dev"
- mkdir -m 0755 /dev/pts
- mkdir -m 0755 /dev/shm
-}
-
-if [ -e /etc/dev.tar ]; then
- (cd /; tar xf /etc/dev.tar)
- not_first_boot=1
-fi
-
-# make_extra_nodes
-kill_udevd > "/dev/null" 2>&1
-
- # trigger the sorted events
- echo -e '\000\000\000\000' > /proc/sys/kernel/hotplug
- /sbin/udevd -d
-
- /sbin/udevcontrol env STARTUP=1
- if [ "$not_first_boot" != "" ];then
- /sbin/udevtrigger --subsystem-nomatch=tty --subsystem-nomatch=mem --subsystem-nomatch=vc --subsystem-nomatch=vtconsole --subsystem-nomatch=misc --subsystem-nomatch=dcon --subsystem-nomatch=pci_bus --subsystem-nomatch=graphics --subsystem-nomatch=backlight --subsystem-nomatch=video4linux --subsystem-nomatch=platform
- (/sbin/udevsettle --timeout=3; /sbin/udevcontrol env STARTUP=)&
- else
- /sbin/udevtrigger
- /sbin/udevsettle
- fi
-
-echo
-exit 0
+++ /dev/null
-# There are a number of modifiers that are allowed to be used in some
-# of the different fields. They provide the following subsitutions:
-#
-# %n the "kernel number" of the device.
-# For example, 'sda3' has a "kernel number" of '3'
-# %e the smallest number for that name which does not matches an existing node
-# %k the kernel name for the device
-# %M the kernel major number for the device
-# %m the kernel minor number for the device
-# %b the bus id for the device
-# %c the string returned by the PROGRAM
-# %s{filename} the content of a sysfs attribute
-# %% the '%' char itself
-#
-
-# Media automounting
-SUBSYSTEM=="block", ACTION=="add" RUN+="/etc/udev/scripts/mount.sh"
-SUBSYSTEM=="block", ACTION=="remove" RUN+="/etc/udev/scripts/mount.sh"
-
-# Handle network interface setup
-SUBSYSTEM=="net", ACTION=="add" RUN+="/etc/udev/scripts/network.sh"
-SUBSYSTEM=="net", ACTION=="remove" RUN+="/etc/udev/scripts/network.sh"
-
-# The first rtc device is symlinked to /dev/rtc
-KERNEL=="rtc0", SYMLINK+="rtc"
-
-# Try and modprobe for drivers for new hardware
-ACTION=="add", DEVPATH=="/devices/*", ENV{MODALIAS}=="?*", RUN+="/sbin/modprobe $env{MODALIAS}"
-
-# Create a symlink to any touchscreen input device
-SUBSYSTEM=="input", KERNEL=="event[0-9]*", SYSFS{modalias}=="input:*-e0*,3,*a0,1,*18,*", SYMLINK+="input/touchscreen0"
+++ /dev/null
-
-#
-# Patch managed by http://www.holgerschurig.de/patcher.html
-#
-
----
- udevd.c | 2 +-
- udevstart.c | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
-Index: udev-115/udevd.c
-===================================================================
---- udev-115.orig/udevd.c 2007-08-24 01:29:54.000000000 +0200
-+++ udev-115/udevd.c 2007-09-20 17:04:51.000000000 +0200
-@@ -767,7 +767,7 @@
- return msg;
- }
-
--static void asmlinkage sig_handler(int signum)
-+static void sig_handler(int signum)
- {
- switch (signum) {
- case SIGINT:
-Index: udev-115/udevstart.c
-===================================================================
---- udev-115.orig/udevstart.c 2007-08-24 01:29:54.000000000 +0200
-+++ udev-115/udevstart.c 2007-09-20 17:04:51.000000000 +0200
-@@ -304,7 +304,7 @@
- }
- }
-
--static void asmlinkage sig_handler(int signum)
-+static void sig_handler(int signum)
- {
- switch (signum) {
- case SIGALRM:
+++ /dev/null
-ACTION!="add", GOTO="permissions_end"
-
-# workarounds needed to synchronize with sysfs
-DEVPATH=="/devices/*", ENV{PHYSDEVBUS}=="?*", WAIT_FOR_SYSFS="bus"
-SUBSYSTEM=="scsi", WAIT_FOR_SYSFS="ioerr_cnt"
-# only needed for kernels < 2.6.16
-SUBSYSTEM=="net", WAIT_FOR_SYSFS="address"
-# only needed for kernels < 2.6.17
-SUBSYSTEM=="net", ENV{PHYSDEVDRIVER}=="?*", WAIT_FOR_SYSFS="device/driver"
-
-# default permissions for block devices
-SUBSYSTEM=="block", GROUP="disk"
-SUBSYSTEM=="block", SYSFS{removable}=="1", GROUP="floppy"
-
-# IDE devices
-BUS=="ide", KERNEL=="hd[a-z]|pcd[0-9]*", DRIVER=="ide-cdrom|pcd", \
- IMPORT{program}="cdrom_id --export $tempnode"
-ENV{ID_CDROM}=="?*", GROUP="cdrom"
-BUS=="ide", KERNEL=="ht[0-9]*", GROUP="tape"
-BUS=="ide", KERNEL=="nht[0-9]*", GROUP="tape"
-
-# SCSI devices
-BUS=="scsi", SYSFS{type}=="1", GROUP="tape"
-BUS=="scsi", SYSFS{type}=="5", GROUP="cdrom"
-
-# USB devices
-BUS=="usb", KERNEL=="legousbtower*", MODE="0666"
-BUS=="usb", KERNEL=="lp[0-9]*", GROUP="lp"
-
-# usbfs-like devices
-SUBSYSTEM=="usb_device", MODE="0664"
-
-# iRiver music players
-SUBSYSTEM=="usb_device", GROUP="plugdev", \
- SYSFS{idVendor}=="4102", SYSFS{idProduct}=="10[01][135789]"
-
-# serial devices
-SUBSYSTEM=="tty", GROUP="dialout"
-SUBSYSTEM=="capi", GROUP="dialout"
-SUBSYSTEM=="slamr", GROUP="dialout"
-SUBSYSTEM=="zaptel", GROUP="dialout"
-
-# vc devices (all members of the tty subsystem)
-KERNEL=="ptmx", MODE="0666", GROUP="root"
-KERNEL=="console", MODE="0600", GROUP="root"
-KERNEL=="tty", MODE="0666", GROUP="root"
-KERNEL=="tty[0-9]*", GROUP="root"
-KERNEL=="pty*", MODE="0666", GROUP="tty"
-
-# video devices
-SUBSYSTEM=="video4linux", GROUP="video"
-SUBSYSTEM=="drm", GROUP="video"
-SUBSYSTEM=="dvb", GROUP="video"
-SUBSYSTEM=="em8300", GROUP="video"
-SUBSYSTEM=="graphics", GROUP="video"
-SUBSYSTEM=="nvidia", GROUP="video"
-
-# misc devices
-KERNEL=="random", MODE="0666"
-KERNEL=="urandom", MODE="0666"
-KERNEL=="mem", MODE="0640", GROUP="kmem"
-KERNEL=="kmem", MODE="0640", GROUP="kmem"
-KERNEL=="port", MODE="0640", GROUP="kmem"
-KERNEL=="full", MODE="0666"
-KERNEL=="null", MODE="0666"
-KERNEL=="zero", MODE="0666"
-KERNEL=="inotify", MODE="0666"
-KERNEL=="sgi_fetchop", MODE="0666"
-KERNEL=="sonypi", MODE="0666"
-KERNEL=="agpgart", GROUP="video"
-KERNEL=="rtc", GROUP="audio"
-
-KERNEL=="cdemu[0-9]*", GROUP="cdrom"
-KERNEL=="pktcdvd[0-9]*", GROUP="cdrom"
-KERNEL=="pktcdvd", MODE="0644"
-
-# printers and parallel devices
-SUBSYSTEM=="printer", GROUP="lp"
-SUBSYSTEM=="ppdev", GROUP="lp"
-KERNEL=="pt[0-9]*", GROUP="tape"
-KERNEL=="pht[0-9]*", GROUP="tape"
-
-# sound devices
-SUBSYSTEM=="sound", GROUP="audio"
-
-# ieee1394 devices
-KERNEL=="raw1394", GROUP="disk"
-KERNEL=="dv1394*", GROUP="video"
-KERNEL=="video1394*", GROUP="video"
-
-# input devices
-KERNEL=="event[0-9]*", SYSFS{name}=="*dvb*|*DVB*|* IR *" \
- MODE="0664", GROUP="video"
-KERNEL=="js[0-9]*", MODE="0664"
-
-# AOE character devices
-SUBSYSTEM=="aoe", MODE="0220", GROUP="disk"
-SUBSYSTEM=="aoe", KERNEL=="err", MODE="0440"
-
-LABEL="permissions_end"
-
+++ /dev/null
-# There are a number of modifiers that are allowed to be used in some
-# of the different fields. They provide the following subsitutions:
-#
-# %n the "kernel number" of the device.
-# For example, 'sda3' has a "kernel number" of '3'
-# %e the smallest number for that name which does not matches an existing node
-# %k the kernel name for the device
-# %M the kernel major number for the device
-# %m the kernel minor number for the device
-# %b the bus id for the device
-# %c the string returned by the PROGRAM
-# %s{filename} the content of a sysfs attribute
-# %% the '%' char itself
-#
-
-# SCSI devices
-BUS=="scsi", KERNEL=="sr[0-9]*", NAME="scd%n", SYMLINK+="sr%n"
-
-# USB devices
-BUS=="usb", KERNEL=="auer[0-9]*", NAME="usb/%k"
-BUS=="usb", KERNEL=="cpad[0-9]*", NAME="usb/%k"
-BUS=="usb", KERNEL=="dabusb*", NAME="usb/%k"
-BUS=="usb", KERNEL=="hiddev*", NAME="usb/%k"
-BUS=="usb", KERNEL=="legousbtower*", NAME="usb/%k"
-BUS=="usb", KERNEL=="lp[0-9]*", NAME="usb/%k"
-BUS=="usb", KERNEL=="ttyUSB*", SYSFS{product}=="Palm Handheld*", \
- SYMLINK+="pilot"
-
-# usbfs-like devices
-SUBSYSTEM=="usb_device", \
- PROGRAM="/bin/sh -c 'export X=%k; export X=$${X#usbdev}; export B=$${X%%%%.*}; export D=$${X#*.}; echo bus/usb/$$B/$$D'", SYMLINK+="%c"
-
-# serial devices
-KERNEL=="capi", NAME="capi20", SYMLINK+="isdn/capi20"
-KERNEL=="capi[0-9]*", NAME="capi/%n"
-
-# video devices
-KERNEL=="card[0-9]*", NAME="dri/%k"
-
-# misc devices
-KERNEL=="hw_random", NAME="hwrng"
-KERNEL=="tun", NAME="net/%k"
-
-KERNEL=="cdemu[0-9]*", NAME="cdemu/%n"
-KERNEL=="pktcdvd[0-9]*", NAME="pktcdvd/%n"
-KERNEL=="pktcdvd", NAME="pktcdvd/control"
-
-KERNEL=="cpu[0-9]*", NAME="cpu/%n/cpuid"
-KERNEL=="msr[0-9]*", NAME="cpu/%n/msr"
-KERNEL=="microcode", NAME="cpu/microcode"
-
-KERNEL=="umad*", NAME="infiniband/%k"
-KERNEL=="issm*", NAME="infiniband/%k"
-KERNEL=="uverbs*", NAME="infiniband/%k"
-KERNEL=="ucm", NAME="infiniband/%k"
-
-KERNEL=="buzzer", NAME="misc/buzzer"
-
-# ALSA devices
-KERNEL=="controlC[0-9]*", NAME="snd/%k"
-KERNEL=="hwC[D0-9]*", NAME="snd/%k"
-KERNEL=="pcmC[D0-9cp]*", NAME="snd/%k"
-KERNEL=="midiC[D0-9]*", NAME="snd/%k"
-KERNEL=="timer", NAME="snd/%k"
-KERNEL=="seq", NAME="snd/%k"
-
-# ieee1394 devices
-KERNEL=="dv1394*", NAME="dv1394/%n"
-KERNEL=="video1394*", NAME="video1394/%n"
-
-# input devices
-KERNEL=="mice", NAME="input/%k"
-KERNEL=="mouse[0-9]*", NAME="input/%k"
-KERNEL=="event[0-9]*", NAME="input/%k"
-KERNEL=="js[0-9]*", NAME="input/%k"
-KERNEL=="ts[0-9]*", NAME="input/%k"
-KERNEL=="uinput", NAME="input/%k"
-
-# Zaptel
-KERNEL=="zapctl", NAME="zap/ctl"
-KERNEL=="zaptimer", NAME="zap/timer"
-KERNEL=="zapchannel", NAME="zap/channel"
-KERNEL=="zappseudo", NAME="zap/pseudo"
-KERNEL=="zap[0-9]*", NAME="zap/%n"
-
-# AOE character devices
-SUBSYSTEM=="aoe", KERNEL=="discover", NAME="etherd/%k"
-SUBSYSTEM=="aoe", KERNEL=="err", NAME="etherd/%k"
-SUBSYSTEM=="aoe", KERNEL=="interfaces", NAME="etherd/%k"
-
-# device mapper creates its own device nodes, so ignore these
-KERNEL=="dm-[0-9]*", OPTIONS+="ignore_device"
-KERNEL=="device-mapper", NAME="mapper/control"
-
-KERNEL=="rfcomm[0-9]*", NAME="%k", GROUP="users", MODE="0660"
-
-# Firmware Helper
-ACTION=="add", SUBSYSTEM=="firmware", RUN+="/lib/udev/firmware_helper"
-
-# Samsung UARTS
-KERNEL=="s3c2410_serial[0-9]", NAME="ttySAC%n"
-
-# MXC UARTs
-KERNEL=="ttymxc[0-4]", NAME="ttymxc%n"
-
+++ /dev/null
----
- udevtrigger.c | 40 ++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 40 insertions(+)
-
-Index: udev-115/udevtrigger.c
-===================================================================
---- udev-115.orig/udevtrigger.c 2007-08-24 01:29:54.000000000 +0200
-+++ udev-115/udevtrigger.c 2007-09-21 18:45:28.000000000 +0200
-@@ -39,6 +39,8 @@
- LIST_HEAD(device_list);
- LIST_HEAD(filter_subsystem_match_list);
- LIST_HEAD(filter_subsystem_nomatch_list);
-+LIST_HEAD(filter_kernel_match_list);
-+LIST_HEAD(filter_kernel_nomatch_list);
- LIST_HEAD(filter_attr_match_list);
- LIST_HEAD(filter_attr_nomatch_list);
-
-@@ -218,6 +220,26 @@
- return 0;
- }
-
-+static int kernel_filtered(const char *kernel)
-+{
-+ struct name_entry *loop_name;
-+
-+ /* skip devices matching the prohibited kernel device names */
-+ list_for_each_entry(loop_name, &filter_kernel_nomatch_list, node)
-+ if (fnmatch(loop_name->name, kernel, 0) == 0)
-+ return 1;
-+
-+ /* skip devices not matching the listed kernel device names */
-+ if (!list_empty(&filter_kernel_match_list)) {
-+ list_for_each_entry(loop_name, &filter_kernel_match_list, node)
-+ if (fnmatch(loop_name->name, kernel, 0) == 0)
-+ return 0;
-+ return 1;
-+ }
-+
-+ return 0;
-+}
-+
- static int attr_filtered(const char *path)
- {
- struct name_entry *loop_name;
-@@ -296,6 +318,9 @@
- if (dent2->d_name[0] == '.')
- continue;
-
-+ if (kernel_filtered(dent2->d_name))
-+ continue;
-+
- strlcpy(dirname2, dirname, sizeof(dirname2));
- strlcat(dirname2, "/", sizeof(dirname2));
- strlcat(dirname2, dent2->d_name, sizeof(dirname2));
-@@ -402,6 +427,9 @@
- if (!strcmp(dent2->d_name, "device"))
- continue;
-
-+ if (kernel_filtered(dent2->d_name))
-+ continue;
-+
- strlcpy(dirname2, dirname, sizeof(dirname2));
- strlcat(dirname2, "/", sizeof(dirname2));
- strlcat(dirname2, dent2->d_name, sizeof(dirname2));
-@@ -458,6 +486,8 @@
- { "subsystem-nomatch", 1, NULL, 'S' },
- { "attr-match", 1, NULL, 'a' },
- { "attr-nomatch", 1, NULL, 'A' },
-+ { "kernel-match", 1, NULL, 'k' },
-+ { "kernel-nomatch", 1, NULL, 'K' },
- {}
- };
-
-@@ -496,6 +526,12 @@
- case 'A':
- name_list_add(&filter_attr_nomatch_list, optarg, 0);
- break;
-+ case 'k':
-+ name_list_add(&filter_kernel_match_list, optarg, 0);
-+ break;
-+ case 'K':
-+ name_list_add(&filter_kernel_nomatch_list, optarg, 0);
-+ break;
- case 'h':
- printf("Usage: udevtrigger OPTIONS\n"
- " --verbose print the list of devices while running\n"
-@@ -504,6 +540,8 @@
- " marked as failed during a previous run\n"
- " --subsystem-match=<subsystem> trigger devices from a matching subystem\n"
- " --subsystem-nomatch=<subsystem> exclude devices from a matching subystem\n"
-+ " --kernel-match=<subsystem> trigger devices from a matching kernel device name\n"
-+ " --kernel-nomatch=<subsystem> exclude devices from a matching kernel device name\n"
- " --attr-match=<file[=<value>]> trigger devices with a matching sysfs\n"
- " attribute\n"
- " --attr-nomatch=<file[=<value>]> exclude devices with a matching sysfs\n"
-@@ -549,6 +587,8 @@
- exit:
- name_list_cleanup(&filter_subsystem_match_list);
- name_list_cleanup(&filter_subsystem_nomatch_list);
-+ name_list_cleanup(&filter_kernel_match_list);
-+ name_list_cleanup(&filter_kernel_nomatch_list);
- name_list_cleanup(&filter_attr_match_list);
- name_list_cleanup(&filter_attr_nomatch_list);
-
+++ /dev/null
----
- extras/volume_id/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-Index: udev-115/extras/volume_id/Makefile
-===================================================================
---- udev-115.orig/extras/volume_id/Makefile 2007-09-20 18:17:59.000000000 +0200
-+++ udev-115/extras/volume_id/Makefile 2007-09-20 18:18:08.000000000 +0200
-@@ -44,7 +44,7 @@
- ifeq ($(strip $(VOLUME_ID_STATIC)),true)
- $(Q) $(LD) $(LDFLAGS) -o $@ $@.o $(LIBUDEV) lib/libvolume_id.a $(LIB_OBJS)
- else
-- $(Q) $(LD) $(LDFLAGS) -o $@ $@.o $(LIBUDEV) -Llib -lvolume_id $(LIB_OBJS)
-+ $(Q) $(LD) -Llib $(LDFLAGS) -o $@ $@.o $(LIBUDEV) -lvolume_id $(LIB_OBJS)
- endif
-
- # man pages
+++ /dev/null
----
- Makefile | 16 ++++++++--------
- 1 file changed, 8 insertions(+), 8 deletions(-)
-
-Index: udev-115/Makefile
-===================================================================
---- udev-115.orig/Makefile 2007-08-24 01:29:54.000000000 +0200
-+++ udev-115/Makefile 2007-09-20 17:21:45.000000000 +0200
-@@ -112,39 +112,39 @@
- AR = $(CROSS_COMPILE)ar
- RANLIB = $(CROSS_COMPILE)ranlib
-
--CFLAGS += -g -Wall -pipe -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64
-+override CFLAGS = -g -Wall -pipe -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64
- WARNINGS = -Wstrict-prototypes -Wsign-compare -Wshadow \
- -Wchar-subscripts -Wmissing-declarations -Wnested-externs \
- -Wpointer-arith -Wcast-align -Wsign-compare -Wmissing-prototypes
--CFLAGS += $(WARNINGS)
-+override CFLAGS += $(WARNINGS)
-
- LDFLAGS += -Wl,-warn-common,--as-needed
-
- OPTFLAGS = -Os
--CFLAGS += $(OPTFLAGS)
-+override CFLAGS += $(OPTFLAGS)
-
- ifeq ($(strip $(USE_LOG)),true)
-- CFLAGS += -DUSE_LOG
-+ override CFLAGS += -DUSE_LOG
- endif
-
- # if DEBUG is enabled, then we do not strip
- ifeq ($(strip $(DEBUG)),true)
-- CFLAGS += -DDEBUG
-+ override CFLAGS += -DDEBUG
- endif
-
- ifeq ($(strip $(USE_GCOV)),true)
-- CFLAGS += -fprofile-arcs -ftest-coverage
-+ override CFLAGS += -fprofile-arcs -ftest-coverage
- LDFLAGS += -fprofile-arcs
- endif
-
- ifeq ($(strip $(USE_SELINUX)),true)
- UDEV_OBJS += udev_selinux.o
- LIB_OBJS += -lselinux -lsepol
-- CFLAGS += -DUSE_SELINUX
-+ override CFLAGS += -DUSE_SELINUX
- endif
-
- ifeq ($(strip $(USE_STATIC)),true)
-- CFLAGS += -DUSE_STATIC
-+ override CFLAGS += -DUSE_STATIC
- LDFLAGS += -static
- endif
-
+++ /dev/null
-#!/bin/sh -e
-
-### BEGIN INIT INFO
-# Provides: udev
-# Required-Start: mountvirtfs
-# Required-Stop:
-# Default-Start: S
-# Default-Stop:
-# Short-Description: Start udevd, populate /dev and load drivers.
-### END INIT INFO
-
-export TZ=/etc/localtime
-
-[ -d /sys/class ] || exit 1
-[ -r /proc/mounts ] || exit 1
-[ -x /sbin/udevd ] || exit 1
-[ -f /etc/udev/udev.conf ] && . /etc/udev/udev.conf
-
-kill_udevd() {
- if [ -x /sbin/pidof ]; then
- pid=`/sbin/pidof -x udevd`
- [ -n "$pid" ] && kill $pid
- fi
-}
-
-export ACTION=add
-# propagate /dev from /sys
-echo -n "Starting udev"
-
-# mount the tmpfs on /dev, if not already done
-LANG=C awk "\$2 == \"/dev\" && \$4 == \"tmpfs\" { exit 1 }" /proc/mounts && {
- mount -n -o mode=0755 -t tmpfs none "/dev"
- mkdir -m 0755 /dev/pts
- mkdir -m 0755 /dev/shm
-}
-
-if [ -e /etc/dev.tar ]; then
- (cd /; tar xf /etc/dev.tar)
- not_first_boot=1
-fi
-
-# make_extra_nodes
-kill_udevd > "/dev/null" 2>&1
-
- # trigger the sorted events
- echo -e '\000\000\000\000' > /proc/sys/kernel/hotplug
- /sbin/udevd -d
-
- /sbin/udevadm control env STARTUP=1
- if [ "$not_first_boot" != "" ];then
- /sbin/udevadm trigger --subsystem-nomatch=tty --subsystem-nomatch=mem --subsystem-nomatch=vc --subsystem-nomatch=vtconsole --subsystem-nomatch=misc --subsystem-nomatch=dcon --subsystem-nomatch=pci_bus --subsystem-nomatch=graphics --subsystem-nomatch=backlight --subsystem-nomatch=video4linux --subsystem-nomatch=platform
- (/sbin/udevadm settle --timeout=3; /sbin/udevadm control env STARTUP=)&
- else
- /sbin/udevadm trigger
- /sbin/udevadm settle
- fi
-
-echo
-exit 0
+++ /dev/null
-# There are a number of modifiers that are allowed to be used in some
-# of the different fields. They provide the following subsitutions:
-#
-# %n the "kernel number" of the device.
-# For example, 'sda3' has a "kernel number" of '3'
-# %e the smallest number for that name which does not matches an existing node
-# %k the kernel name for the device
-# %M the kernel major number for the device
-# %m the kernel minor number for the device
-# %b the bus id for the device
-# %c the string returned by the PROGRAM
-# %s{filename} the content of a sysfs attribute
-# %% the '%' char itself
-#
-
-# Media automounting
-SUBSYSTEM=="block", ACTION=="add" RUN+="/etc/udev/scripts/mount.sh"
-SUBSYSTEM=="block", ACTION=="remove" RUN+="/etc/udev/scripts/mount.sh"
-
-# Handle network interface setup
-SUBSYSTEM=="net", ACTION=="add" RUN+="/etc/udev/scripts/network.sh"
-SUBSYSTEM=="net", ACTION=="remove" RUN+="/etc/udev/scripts/network.sh"
-
-# The first rtc device is symlinked to /dev/rtc
-KERNEL=="rtc0", SYMLINK+="rtc"
-
-# Try and modprobe for drivers for new hardware
-ACTION=="add", DEVPATH=="/devices/*", ENV{MODALIAS}=="?*", RUN+="/sbin/modprobe $env{MODALIAS}"
-
-# Create a symlink to any touchscreen input device
-SUBSYSTEM=="input", KERNEL=="event[0-9]*", SYSFS{modalias}=="input:*-e0*,3,*a0,1,*18,*", SYMLINK+="input/touchscreen0"
+++ /dev/null
-diff -pru udev-124.orig/test-udev.c udev-124/test-udev.c
---- udev-124.orig/test-udev.c 2008-06-12 06:24:30.000000000 +0100
-+++ udev-124/test-udev.c 2008-07-07 14:43:37.000000000 +0100
-@@ -46,7 +46,7 @@ void log_message(int priority, const cha
- }
- #endif
-
--static void asmlinkage sig_handler(int signum)
-+static void sig_handler(int signum)
- {
- switch (signum) {
- case SIGALRM:
-diff -pru udev-124.orig/udevd.c udev-124/udevd.c
---- udev-124.orig/udevd.c 2008-06-12 06:24:30.000000000 +0100
-+++ udev-124/udevd.c 2008-07-07 14:43:58.000000000 +0100
-@@ -87,7 +87,7 @@ void log_message(int priority, const cha
-
- #endif
-
--static void asmlinkage udev_event_sig_handler(int signum)
-+static void udev_event_sig_handler(int signum)
- {
- if (signum == SIGALRM)
- exit(1);
-@@ -798,7 +798,7 @@ static struct udevd_uevent_msg *get_netl
- return msg;
- }
-
--static void asmlinkage sig_handler(int signum)
-+static void sig_handler(int signum)
- {
- switch (signum) {
- case SIGINT:
-diff -pru udev-124.orig/udevmonitor.c udev-124/udevmonitor.c
---- udev-124.orig/udevmonitor.c 2008-06-12 06:24:30.000000000 +0100
-+++ udev-124/udevmonitor.c 2008-07-07 14:44:24.000000000 +0100
-@@ -97,7 +97,7 @@ static int init_uevent_netlink_sock(void
- return 0;
- }
-
--static void asmlinkage sig_handler(int signum)
-+static void sig_handler(int signum)
- {
- if (signum == SIGINT || signum == SIGTERM)
- udev_exit = 1;
+++ /dev/null
-ACTION!="add", GOTO="permissions_end"
-
-# workarounds needed to synchronize with sysfs
-# only needed for kernels < v2.6.18-rc1
-ENV{PHYSDEVPATH}!="?*", ENV{PHYSDEVBUS}=="?*", WAIT_FOR_SYSFS="bus"
-SUBSYSTEM=="scsi", KERNEL=="[0-9]*:[0-9]*", WAIT_FOR_SYSFS="ioerr_cnt"
-# only needed for kernels < 2.6.16
-SUBSYSTEM=="net", WAIT_FOR_SYSFS="address"
-# only needed for kernels < 2.6.17
-SUBSYSTEM=="net", ENV{DRIVER}=="?*", WAIT_FOR_SYSFS="device/driver"
-
-# devices needed to load the drivers providing them
-KERNEL=="tun", OPTIONS+="ignore_remove"
-KERNEL=="ppp", OPTIONS+="ignore_remove"
-KERNEL=="loop[0-9]*", OPTIONS+="ignore_remove"
-
-# default permissions for block devices
-SUBSYSTEM=="block", GROUP="disk"
-# the aacraid driver is broken and reports that disks removable (see #404927)
-SUBSYSTEM=="block", ATTRS{removable}=="1", \
- DRIVERS!="aacraid", GROUP="floppy"
-# all block devices on these buses are "removable"
-SUBSYSTEM=="block", SUBSYSTEMS=="usb|ieee1394|mmc|pcmcia", GROUP="floppy"
-
-# IDE devices
-KERNEL=="hd[a-z]|pcd[0-9]*", DRIVERS=="ide-cdrom|pcd", \
- IMPORT{program}="cdrom_id --export $tempnode"
-ENV{ID_CDROM}=="?*", GROUP="cdrom"
-KERNEL=="ht[0-9]*", GROUP="tape"
-KERNEL=="nht[0-9]*", GROUP="tape"
-
-# SCSI devices
-KERNEL=="sr[0-9]*", IMPORT{program}="cdrom_id --export $tempnode"
-SUBSYSTEMS=="scsi", ATTRS{type}=="1", GROUP="tape"
-SUBSYSTEMS=="scsi", ATTRS{type}=="3", ATTRS{vendor}=="HP", GROUP="scanner"
-SUBSYSTEMS=="scsi", ATTRS{type}=="3", ATTRS{vendor}=="Epson", GROUP="scanner"
-SUBSYSTEMS=="scsi", ATTRS{type}=="3", ATTRS{vendor}=="EPSON", GROUP="scanner"
-SUBSYSTEMS=="scsi", ATTRS{type}=="4", GROUP="cdrom"
-SUBSYSTEMS=="scsi", ATTRS{type}=="5", GROUP="cdrom"
-SUBSYSTEMS=="scsi", ATTRS{type}=="6", GROUP="scanner"
-SUBSYSTEMS=="scsi", ATTRS{type}=="8", GROUP="tape"
-
-# USB devices
-KERNEL=="legousbtower*", MODE="0666"
-KERNEL=="lp[0-9]*", SUBSYSTEMS=="usb", GROUP="lp"
-
-# usbfs-like devices
-SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", \
- MODE="0664"
-
-# iRiver music players
-SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", GROUP="plugdev", \
- ATTRS{idVendor}=="4102", ATTRS{idProduct}=="10[01][135789]"
-
-# serial devices
-SUBSYSTEM=="tty", GROUP="dialout"
-SUBSYSTEM=="capi", GROUP="dialout"
-SUBSYSTEM=="slamr", GROUP="dialout"
-SUBSYSTEM=="zaptel", GROUP="dialout"
-
-# vc devices (all members of the tty subsystem)
-KERNEL=="ptmx", MODE="0666", GROUP="root"
-KERNEL=="console", MODE="0600", GROUP="root"
-KERNEL=="tty", MODE="0666", GROUP="root"
-KERNEL=="tty[0-9]*", GROUP="root"
-KERNEL=="pty*", MODE="0666", GROUP="tty"
-
-# video devices
-SUBSYSTEM=="video4linux", GROUP="video"
-SUBSYSTEM=="drm", GROUP="video"
-SUBSYSTEM=="dvb", GROUP="video"
-SUBSYSTEM=="em8300", GROUP="video"
-SUBSYSTEM=="graphics", GROUP="video"
-SUBSYSTEM=="nvidia", GROUP="video"
-
-# misc devices
-KERNEL=="random", MODE="0666"
-KERNEL=="urandom", MODE="0666"
-KERNEL=="mem", MODE="0640", GROUP="kmem"
-KERNEL=="kmem", MODE="0640", GROUP="kmem"
-KERNEL=="port", MODE="0640", GROUP="kmem"
-KERNEL=="full", MODE="0666"
-KERNEL=="null", MODE="0666"
-KERNEL=="zero", MODE="0666"
-KERNEL=="inotify", MODE="0666"
-KERNEL=="sgi_fetchop", MODE="0666"
-KERNEL=="sonypi", MODE="0666"
-KERNEL=="agpgart", GROUP="video"
-KERNEL=="nvram", GROUP="nvram"
-KERNEL=="rtc|rtc[0-9]*", GROUP="audio"
-KERNEL=="tpm*", MODE="0600", OWNER="tss", GROUP="tss"
-KERNEL=="fuse", GROUP="fuse"
-KERNEL=="kqemu", MODE="0666"
-KERNEL=="kvm", GROUP="kvm"
-KERNEL=="tun", MODE="0666",
-
-KERNEL=="cdemu[0-9]*", GROUP="cdrom"
-KERNEL=="pktcdvd[0-9]*", GROUP="cdrom"
-KERNEL=="pktcdvd", MODE="0644"
-
-KERNEL=="uverbs*", GROUP="rdma"
-KERNEL=="ucm*", GROUP="rdma"
-KERNEL=="rdma_ucm", GROUP="rdma"
-
-# printers and parallel devices
-SUBSYSTEM=="printer", GROUP="lp"
-SUBSYSTEM=="ppdev", GROUP="lp"
-KERNEL=="irlpt*", GROUP="lp"
-KERNEL=="pt[0-9]*", GROUP="tape"
-KERNEL=="pht[0-9]*", GROUP="tape"
-
-# sound devices
-SUBSYSTEM=="sound", GROUP="audio"
-
-# ieee1394 devices
-KERNEL=="raw1394", GROUP="disk"
-KERNEL=="dv1394*", GROUP="video"
-KERNEL=="video1394*", GROUP="video"
-
-# input devices
-KERNEL=="event[0-9]*", ATTRS{name}=="*dvb*|*DVB*|* IR *" \
- MODE="0664", GROUP="video"
-KERNEL=="js[0-9]*", MODE="0664"
-KERNEL=="lirc[0-9]*", GROUP="video"
-
-# AOE character devices
-SUBSYSTEM=="aoe", MODE="0220", GROUP="disk"
-SUBSYSTEM=="aoe", KERNEL=="err", MODE="0440"
-
-LABEL="permissions_end"
-
+++ /dev/null
-# debugging monitor
-RUN+="socket:/org/kernel/udev/monitor"
-
-# run a command on remove events
-ACTION=="remove", ENV{REMOVE_CMD}!="", RUN+="$env{REMOVE_CMD}"
-
-# ignore the events generated by virtual consoles
-KERNEL=="ptmx", OPTIONS+="last_rule"
-KERNEL=="console", OPTIONS+="last_rule"
-KERNEL=="tty" , OPTIONS+="last_rule"
-KERNEL=="tty[0-9]*", OPTIONS+="last_rule"
-KERNEL=="pty*", OPTIONS+="last_rule"
-SUBSYSTEM=="vc", OPTIONS+="last_rule"
-
+++ /dev/null
-# There are a number of modifiers that are allowed to be used in some
-# of the different fields. They provide the following subsitutions:
-#
-# %n the "kernel number" of the device.
-# For example, 'sda3' has a "kernel number" of '3'
-# %e the smallest number for that name which does not matches an existing node
-# %k the kernel name for the device
-# %M the kernel major number for the device
-# %m the kernel minor number for the device
-# %b the bus id for the device
-# %c the string returned by the PROGRAM
-# %s{filename} the content of a sysfs attribute
-# %% the '%' char itself
-#
-
-# workaround for devices which do not report media changes
-SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", ATTR{removable}=="1", \
- ENV{ID_MODEL}=="IOMEGA_ZIP*", NAME="%k", OPTIONS+="all_partitions"
-SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", ATTRS{media}=="floppy", \
- OPTIONS+="all_partitions"
-
-# SCSI devices
-SUBSYSTEMS=="scsi", KERNEL=="sr[0-9]*", NAME="scd%n", SYMLINK+="sr%n"
-
-# USB devices
-SUBSYSTEMS=="usb", KERNEL=="auer[0-9]*", NAME="usb/%k"
-SUBSYSTEMS=="usb", KERNEL=="cpad[0-9]*", NAME="usb/%k"
-SUBSYSTEMS=="usb", KERNEL=="dabusb*", NAME="usb/%k"
-SUBSYSTEMS=="usb", KERNEL=="hiddev*", NAME="usb/%k"
-SUBSYSTEMS=="usb", KERNEL=="legousbtower*", NAME="usb/%k"
-SUBSYSTEMS=="usb", KERNEL=="lp[0-9]*", NAME="usb/%k"
-SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", \
- ATTRS{product}=="Palm Handheld*|Handspring Visor|palmOne Handheld", \
- SYMLINK+="pilot"
-
-# usbfs-like devices
-SUBSYSTEM=="usb_device", PROGRAM="/bin/sh -c 'K=%k; K=$${K#usbdev}; printf bus/usb/%%03i/%%03i $${K%%%%.*} $${K#*.}'", ACTION=="add", \
- NAME="%c"
-SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}"
-
-# serial devices
-KERNEL=="capi", NAME="capi20", SYMLINK+="isdn/capi20"
-KERNEL=="capi[0-9]*", NAME="capi/%n"
-
-# video devices
-KERNEL=="dvb*", PROGRAM="/bin/sh -c 'K=%k; K=$${K#dvb}; printf dvb/adapter%%i/%%s $${K%%%%.*} $${K#*.}", ACTION=="add", \
- NAME="%c"
-KERNEL=="card[0-9]*", NAME="dri/%k"
-
-# misc devices
-KERNEL=="hw_random", NAME="hwrng"
-KERNEL=="tun", NAME="net/%k"
-KERNEL=="evtchn", NAME="xen/%k"
-
-KERNEL=="cdemu[0-9]*", NAME="cdemu/%n"
-KERNEL=="pktcdvd[0-9]*", NAME="pktcdvd/%n"
-KERNEL=="pktcdvd", NAME="pktcdvd/control"
-
-KERNEL=="cpu[0-9]*", NAME="cpu/%n/cpuid"
-KERNEL=="msr[0-9]*", NAME="cpu/%n/msr"
-KERNEL=="microcode", NAME="cpu/microcode"
-
-KERNEL=="umad*", NAME="infiniband/%k"
-KERNEL=="issm*", NAME="infiniband/%k"
-KERNEL=="uverbs*", NAME="infiniband/%k"
-KERNEL=="ucm*", NAME="infiniband/%k"
-KERNEL=="rdma_ucm", NAME="infiniband/%k"
-
-# ALSA devices
-KERNEL=="controlC[0-9]*", NAME="snd/%k"
-KERNEL=="hwC[D0-9]*", NAME="snd/%k"
-KERNEL=="pcmC[D0-9cp]*", NAME="snd/%k"
-KERNEL=="midiC[D0-9]*", NAME="snd/%k"
-KERNEL=="timer", NAME="snd/%k"
-KERNEL=="seq", NAME="snd/%k"
-
-# ieee1394 devices
-KERNEL=="dv1394*", NAME="dv1394/%n"
-KERNEL=="video1394*", NAME="video1394/%n"
-
-# input devices
-KERNEL=="mice", NAME="input/%k"
-KERNEL=="mouse[0-9]*", NAME="input/%k"
-KERNEL=="event[0-9]*", NAME="input/%k"
-KERNEL=="js[0-9]*", NAME="input/%k"
-KERNEL=="ts[0-9]*", NAME="input/%k"
-KERNEL=="uinput", NAME="input/%k"
-
-# Zaptel
-KERNEL=="zapctl", NAME="zap/ctl"
-KERNEL=="zaptimer", NAME="zap/timer"
-KERNEL=="zapchannel", NAME="zap/channel"
-KERNEL=="zappseudo", NAME="zap/pseudo"
-KERNEL=="zap[0-9]*", NAME="zap/%n"
-
-# AOE character devices
-SUBSYSTEM=="aoe", KERNEL=="discover", NAME="etherd/%k"
-SUBSYSTEM=="aoe", KERNEL=="err", NAME="etherd/%k"
-SUBSYSTEM=="aoe", KERNEL=="interfaces", NAME="etherd/%k"
-SUBSYSTEM=="aoe", KERNEL=="revalidate", NAME="etherd/%k"
-
-# device mapper creates its own device nodes, so ignore these
-KERNEL=="dm-[0-9]*", OPTIONS+="ignore_device"
-KERNEL=="device-mapper", NAME="mapper/control"
-
-KERNEL=="rfcomm[0-9]*", NAME="%k", GROUP="users", MODE="0660"
-
-# Firmware Helper
-ACTION=="add", SUBSYSTEM=="firmware", RUN+="/lib/udev/firmware.sh"
-
-# Samsung UARTS
-KERNEL=="s3c2410_serial[0-9]", NAME="ttySAC%n"
-
-# MXC UARTs
-KERNEL=="ttymxc[0-4]", NAME="ttymxc%n"
-
+++ /dev/null
-diff -pru udev-124.orig/udevtrigger.c udev-124/udevtrigger.c
---- udev-124.orig/udevtrigger.c 2008-06-12 06:24:30.000000000 +0100
-+++ udev-124/udevtrigger.c 2008-07-07 15:10:09.000000000 +0100
-@@ -42,6 +42,8 @@ static int dry_run;
- LIST_HEAD(device_list);
- LIST_HEAD(filter_subsystem_match_list);
- LIST_HEAD(filter_subsystem_nomatch_list);
-+LIST_HEAD(filter_kernel_match_list);
-+LIST_HEAD(filter_kernel_nomatch_list);
- LIST_HEAD(filter_attr_match_list);
- LIST_HEAD(filter_attr_nomatch_list);
- static int sock = -1;
-@@ -331,6 +333,26 @@ static int attr_match(const char *path,
- return 0;
- }
-
-+static int kernel_filtered(const char *kernel)
-+{
-+ struct name_entry *loop_name;
-+
-+ /* skip devices matching the prohibited kernel device names */
-+ list_for_each_entry(loop_name, &filter_kernel_nomatch_list, node)
-+ if (fnmatch(loop_name->name, kernel, 0) == 0)
-+ return 1;
-+
-+ /* skip devices not matching the listed kernel device names */
-+ if (!list_empty(&filter_kernel_match_list)) {
-+ list_for_each_entry(loop_name, &filter_kernel_match_list, node)
-+ if (fnmatch(loop_name->name, kernel, 0) == 0)
-+ return 0;
-+ return 1;
-+ }
-+
-+ return 0;
-+}
-+
- static int attr_filtered(const char *path)
- {
- struct name_entry *loop_name;
-@@ -409,6 +431,9 @@ static void scan_subsystem(const char *s
- if (dent2->d_name[0] == '.')
- continue;
-
-+ if (kernel_filtered(dent2->d_name))
-+ continue;
-+
- strlcpy(dirname2, dirname, sizeof(dirname2));
- strlcat(dirname2, "/", sizeof(dirname2));
- strlcat(dirname2, dent2->d_name, sizeof(dirname2));
-@@ -465,6 +490,9 @@ static void scan_block(void)
- if (!strcmp(dent2->d_name,"device"))
- continue;
-
-+ if (kernel_filtered(dent2->d_name))
-+ continue;
-+
- strlcpy(dirname2, dirname, sizeof(dirname2));
- strlcat(dirname2, "/", sizeof(dirname2));
- strlcat(dirname2, dent2->d_name, sizeof(dirname2));
-@@ -576,6 +604,8 @@ int udevtrigger(int argc, char *argv[],
- { "subsystem-nomatch", 1, NULL, 'S' },
- { "attr-match", 1, NULL, 'a' },
- { "attr-nomatch", 1, NULL, 'A' },
-+ { "kernel-match", 1, NULL, 'k' },
-+ { "kernel-nomatch", 1, NULL, 'K' },
- { "env", 1, NULL, 'e' },
- {}
- };
-@@ -622,6 +652,12 @@ int udevtrigger(int argc, char *argv[],
- case 'A':
- name_list_add(&filter_attr_nomatch_list, optarg, 0);
- break;
-+ case 'k':
-+ name_list_add(&filter_kernel_match_list, optarg, 0);
-+ break;
-+ case 'K':
-+ name_list_add(&filter_kernel_nomatch_list, optarg, 0);
-+ break;
- case 'h':
- printf("Usage: udevadm trigger OPTIONS\n"
- " --verbose print the list of devices while running\n"
-@@ -632,6 +668,8 @@ int udevtrigger(int argc, char *argv[],
- " --env=<KEY>=<value> pass an additional key (works only with --socket=)\n"
- " --subsystem-match=<subsystem> trigger devices from a matching subystem\n"
- " --subsystem-nomatch=<subsystem> exclude devices from a matching subystem\n"
-+ " --kernel-match=<subsystem> trigger devices from a matching kernel device name\n"
-+ " --kernel-nomatch=<subsystem> exclude devices from a matching kernel device name\n"
- " --attr-match=<file[=<value>]> trigger devices with a matching sysfs\n"
- " attribute\n"
- " --attr-nomatch=<file[=<value>]> exclude devices with a matching sysfs\n"
-@@ -701,6 +739,8 @@ int udevtrigger(int argc, char *argv[],
- exit:
- name_list_cleanup(&filter_subsystem_match_list);
- name_list_cleanup(&filter_subsystem_nomatch_list);
-+ name_list_cleanup(&filter_kernel_match_list);
-+ name_list_cleanup(&filter_kernel_nomatch_list);
- name_list_cleanup(&filter_attr_match_list);
- name_list_cleanup(&filter_attr_nomatch_list);
-
+++ /dev/null
----
- extras/volume_id/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-Index: udev-115/extras/volume_id/Makefile
-===================================================================
---- udev-115.orig/extras/volume_id/Makefile 2007-09-20 18:17:59.000000000 +0200
-+++ udev-115/extras/volume_id/Makefile 2007-09-20 18:18:08.000000000 +0200
-@@ -44,7 +44,7 @@
- ifeq ($(strip $(VOLUME_ID_STATIC)),true)
- $(Q) $(LD) $(LDFLAGS) -o $@ $@.o $(LIBUDEV) lib/libvolume_id.a $(LIB_OBJS)
- else
-- $(Q) $(LD) $(LDFLAGS) -o $@ $@.o $(LIBUDEV) -Llib -lvolume_id $(LIB_OBJS)
-+ $(Q) $(LD) -Llib $(LDFLAGS) -o $@ $@.o $(LIBUDEV) -lvolume_id $(LIB_OBJS)
- endif
-
- # man pages
+++ /dev/null
-# There are a number of modifiers that are allowed to be used in some
-# of the different fields. They provide the following subsitutions:
-#
-# %n the "kernel number" of the device.
-# For example, 'sda3' has a "kernel number" of '3'
-# %e the smallest number for that name which does not matches an existing node
-# %k the kernel name for the device
-# %M the kernel major number for the device
-# %m the kernel minor number for the device
-# %b the bus id for the device
-# %c the string returned by the PROGRAM
-# %s{filename} the content of a sysfs attribute
-# %% the '%' char itself
-#
-
-# Media automounting
-SUBSYSTEM=="block", ACTION=="add" RUN+="/etc/udev/scripts/mount.sh"
-SUBSYSTEM=="block", ACTION=="remove" RUN+="/etc/udev/scripts/mount.sh"
-
-# Handle network interface setup
-SUBSYSTEM=="net", ACTION=="add" RUN+="/etc/udev/scripts/network.sh"
-SUBSYSTEM=="net", ACTION=="remove" RUN+="/etc/udev/scripts/network.sh"
-
-# The first rtc device is symlinked to /dev/rtc
-KERNEL=="rtc0", SYMLINK+="rtc"
-
-# The first framebuffer is symlinked to /dev/fb
-KERNEL=="fb0", SYMLINK+="fb"
-
-# Try and modprobe for drivers for new hardware
-ACTION=="add", DEVPATH=="/devices/*", ENV{MODALIAS}=="?*", RUN+="/sbin/modprobe $env{MODALIAS}"
-
-# Create a symlink to any touchscreen input device
-SUBSYSTEM=="input", KERNEL=="event[0-9]*", SYSFS{modalias}=="input:*-e0*,3,*a0,1,*18,*", SYMLINK+="input/touchscreen0"
+++ /dev/null
-#!/bin/sh -e
-
-### BEGIN INIT INFO
-# Provides: udev
-# Required-Start: mountvirtfs
-# Required-Stop:
-# Default-Start: S
-# Default-Stop:
-# Short-Description: Start udevd, populate /dev and load drivers.
-### END INIT INFO
-
-export TZ=/etc/localtime
-
-[ -d /sys/class ] || exit 1
-[ -r /proc/mounts ] || exit 1
-[ -x /sbin/udevd ] || exit 1
-[ -f /etc/udev/udev.conf ] && . /etc/udev/udev.conf
-
-kill_udevd() {
- if [ -x /sbin/pidof ]; then
- pid=`/sbin/pidof -x udevd`
- [ -n "$pid" ] && kill $pid
- fi
-}
-
-export ACTION=add
-# propagate /dev from /sys
-echo -n "Starting udev"
-
-# mount the tmpfs on /dev, if not already done
-LANG=C awk "\$2 == \"/dev\" && \$4 == \"tmpfs\" { exit 1 }" /proc/mounts && {
- mount -n -o mode=0755 -t tmpfs none "/dev"
- mkdir -m 0755 /dev/pts
- mkdir -m 1777 /dev/shm
-}
-
-if [ -e /etc/dev.tar ]; then
- (cd /; tar xf /etc/dev.tar)
- not_first_boot=1
-fi
-
-# make_extra_nodes
-kill_udevd > "/dev/null" 2>&1
-
- # trigger the sorted events
- echo -e '\000\000\000\000' > /proc/sys/kernel/hotplug
- /sbin/udevd -d
-
- /sbin/udevadm control --env=STARTUP=1
- if [ "$not_first_boot" != "" ];then
- /sbin/udevadm trigger --subsystem-nomatch=tty --subsystem-nomatch=mem --subsystem-nomatch=vc --subsystem-nomatch=vtconsole --subsystem-nomatch=misc --subsystem-nomatch=dcon --subsystem-nomatch=pci_bus --subsystem-nomatch=graphics --subsystem-nomatch=backlight --subsystem-nomatch=video4linux --subsystem-nomatch=platform
- (/sbin/udevadm settle --timeout=3; /sbin/udevadm control --env=STARTUP=)&
- else
- /sbin/udevadm trigger
- /sbin/udevadm settle
- fi
-
-echo
-exit 0
+++ /dev/null
-# There are a number of modifiers that are allowed to be used in some
-# of the different fields. They provide the following subsitutions:
-#
-# %n the "kernel number" of the device.
-# For example, 'sda3' has a "kernel number" of '3'
-# %e the smallest number for that name which does not matches an existing node
-# %k the kernel name for the device
-# %M the kernel major number for the device
-# %m the kernel minor number for the device
-# %b the bus id for the device
-# %c the string returned by the PROGRAM
-# %s{filename} the content of a sysfs attribute
-# %% the '%' char itself
-#
-
-# Media automounting
-SUBSYSTEM=="block", ACTION=="add" RUN+="/etc/udev/scripts/mount.sh"
-SUBSYSTEM=="block", ACTION=="remove" RUN+="/etc/udev/scripts/mount.sh"
-
-# Handle network interface setup
-SUBSYSTEM=="net", ACTION=="add" RUN+="/etc/udev/scripts/network.sh"
-SUBSYSTEM=="net", ACTION=="remove" RUN+="/etc/udev/scripts/network.sh"
-
-# The first rtc device is symlinked to /dev/rtc
-KERNEL=="rtc0", SYMLINK+="rtc"
-
-# Try and modprobe for drivers for new hardware
-ACTION=="add", DEVPATH=="/devices/*", ENV{MODALIAS}=="?*", RUN+="/sbin/modprobe $env{MODALIAS}"
-
-# Create a symlink to any touchscreen input device
-# Need to use ../ so the eventX can find the parent inputX modalias which is a directory above
-SUBSYSTEM=="input", KERNEL=="event[0-9]*", ATTRS{../modalias}=="input:*-e0*,3,*a0,1,*18,*", SYMLINK+="input/touchscreen0"
-
+++ /dev/null
-Index: udev-141/udev/test-udev.c
-===================================================================
---- udev-141.orig/udev/test-udev.c 2008-10-24 09:07:24.000000000 +0100
-+++ udev-141/udev/test-udev.c 2009-04-14 15:34:01.000000000 +0100
-@@ -30,7 +30,7 @@
-
- #include "udev.h"
-
--static void asmlinkage sig_handler(int signum)
-+static void sig_handler(int signum)
- {
- switch (signum) {
- case SIGALRM:
-Index: udev-141/udev/udevadm-monitor.c
-===================================================================
---- udev-141.orig/udev/udevadm-monitor.c 2009-03-29 19:07:01.000000000 +0100
-+++ udev-141/udev/udevadm-monitor.c 2009-04-14 15:34:01.000000000 +0100
-@@ -35,7 +35,7 @@
-
- static int udev_exit;
-
--static void asmlinkage sig_handler(int signum)
-+static void sig_handler(int signum)
- {
- if (signum == SIGINT || signum == SIGTERM)
- udev_exit = 1;
-Index: udev-141/udev/udevd.c
-===================================================================
---- udev-141.orig/udev/udevd.c 2009-03-29 19:07:01.000000000 +0100
-+++ udev-141/udev/udevd.c 2009-04-14 15:34:56.000000000 +0100
-@@ -172,7 +172,7 @@
- udev_event_unref(event);
- }
-
--static void asmlinkage event_sig_handler(int signum)
-+static void event_sig_handler(int signum)
- {
- if (signum == SIGALRM)
- exit(1);
-@@ -583,7 +583,7 @@
- return 0;
- }
-
--static void asmlinkage sig_handler(int signum)
-+static void sig_handler(int signum)
- {
- switch (signum) {
- case SIGINT:
+++ /dev/null
-ACTION!="add", GOTO="permissions_end"
-
-# workarounds needed to synchronize with sysfs
-# only needed for kernels < v2.6.18-rc1
-ENV{PHYSDEVPATH}!="?*", ENV{PHYSDEVBUS}=="?*", WAIT_FOR_SYSFS="bus"
-SUBSYSTEM=="scsi", KERNEL=="[0-9]*:[0-9]*", WAIT_FOR_SYSFS="ioerr_cnt"
-# only needed for kernels < 2.6.16
-SUBSYSTEM=="net", WAIT_FOR_SYSFS="address"
-# only needed for kernels < 2.6.17
-SUBSYSTEM=="net", ENV{DRIVER}=="?*", WAIT_FOR_SYSFS="device/driver"
-
-# devices needed to load the drivers providing them
-KERNEL=="tun", OPTIONS+="ignore_remove"
-KERNEL=="ppp", OPTIONS+="ignore_remove"
-KERNEL=="loop[0-9]*", OPTIONS+="ignore_remove"
-
-# default permissions for block devices
-SUBSYSTEM=="block", GROUP="disk"
-# the aacraid driver is broken and reports that disks removable (see #404927)
-SUBSYSTEM=="block", ATTRS{removable}=="1", \
- DRIVERS!="aacraid", GROUP="floppy"
-# all block devices on these buses are "removable"
-SUBSYSTEM=="block", SUBSYSTEMS=="usb|ieee1394|mmc|pcmcia", GROUP="floppy"
-
-# IDE devices
-KERNEL=="hd[a-z]|pcd[0-9]*", DRIVERS=="ide-cdrom|pcd", \
- IMPORT{program}="cdrom_id --export $tempnode"
-ENV{ID_CDROM}=="?*", GROUP="cdrom"
-KERNEL=="ht[0-9]*", GROUP="tape"
-KERNEL=="nht[0-9]*", GROUP="tape"
-
-# SCSI devices
-KERNEL=="sr[0-9]*", IMPORT{program}="cdrom_id --export $tempnode"
-SUBSYSTEMS=="scsi", ATTRS{type}=="1", GROUP="tape"
-SUBSYSTEMS=="scsi", ATTRS{type}=="3", ATTRS{vendor}=="HP", GROUP="scanner"
-SUBSYSTEMS=="scsi", ATTRS{type}=="3", ATTRS{vendor}=="Epson", GROUP="scanner"
-SUBSYSTEMS=="scsi", ATTRS{type}=="3", ATTRS{vendor}=="EPSON", GROUP="scanner"
-SUBSYSTEMS=="scsi", ATTRS{type}=="4", GROUP="cdrom"
-SUBSYSTEMS=="scsi", ATTRS{type}=="5", GROUP="cdrom"
-SUBSYSTEMS=="scsi", ATTRS{type}=="6", GROUP="scanner"
-SUBSYSTEMS=="scsi", ATTRS{type}=="8", GROUP="tape"
-
-# USB devices
-KERNEL=="legousbtower*", MODE="0666"
-KERNEL=="lp[0-9]*", SUBSYSTEMS=="usb", GROUP="lp"
-
-# usbfs-like devices
-SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", \
- MODE="0664"
-
-# iRiver music players
-SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", GROUP="plugdev", \
- ATTRS{idVendor}=="4102", ATTRS{idProduct}=="10[01][135789]"
-
-# serial devices
-SUBSYSTEM=="tty", GROUP="dialout"
-SUBSYSTEM=="capi", GROUP="dialout"
-SUBSYSTEM=="slamr", GROUP="dialout"
-SUBSYSTEM=="zaptel", GROUP="dialout"
-
-# vc devices (all members of the tty subsystem)
-KERNEL=="ptmx", MODE="0666", GROUP="root"
-KERNEL=="console", MODE="0600", GROUP="root"
-KERNEL=="tty", MODE="0666", GROUP="root"
-KERNEL=="tty[0-9]*", GROUP="root"
-KERNEL=="pty*", MODE="0666", GROUP="tty"
-
-# video devices
-SUBSYSTEM=="video4linux", GROUP="video"
-SUBSYSTEM=="drm", GROUP="video"
-SUBSYSTEM=="dvb", GROUP="video"
-SUBSYSTEM=="em8300", GROUP="video"
-SUBSYSTEM=="graphics", GROUP="video"
-SUBSYSTEM=="nvidia", GROUP="video"
-
-# misc devices
-KERNEL=="random", MODE="0666"
-KERNEL=="urandom", MODE="0666"
-KERNEL=="mem", MODE="0640", GROUP="kmem"
-KERNEL=="kmem", MODE="0640", GROUP="kmem"
-KERNEL=="port", MODE="0640", GROUP="kmem"
-KERNEL=="full", MODE="0666"
-KERNEL=="null", MODE="0666"
-KERNEL=="zero", MODE="0666"
-KERNEL=="inotify", MODE="0666"
-KERNEL=="sgi_fetchop", MODE="0666"
-KERNEL=="sonypi", MODE="0666"
-KERNEL=="agpgart", GROUP="video"
-KERNEL=="nvram", GROUP="nvram"
-KERNEL=="rtc|rtc[0-9]*", GROUP="audio"
-KERNEL=="tpm*", MODE="0600", OWNER="tss", GROUP="tss"
-KERNEL=="fuse", GROUP="fuse"
-KERNEL=="kqemu", MODE="0666"
-KERNEL=="kvm", GROUP="kvm"
-KERNEL=="tun", MODE="0666",
-
-KERNEL=="cdemu[0-9]*", GROUP="cdrom"
-KERNEL=="pktcdvd[0-9]*", GROUP="cdrom"
-KERNEL=="pktcdvd", MODE="0644"
-
-KERNEL=="uverbs*", GROUP="rdma"
-KERNEL=="ucm*", GROUP="rdma"
-KERNEL=="rdma_ucm", GROUP="rdma"
-
-# printers and parallel devices
-SUBSYSTEM=="printer", GROUP="lp"
-SUBSYSTEM=="ppdev", GROUP="lp"
-KERNEL=="irlpt*", GROUP="lp"
-KERNEL=="pt[0-9]*", GROUP="tape"
-KERNEL=="pht[0-9]*", GROUP="tape"
-
-# sound devices
-SUBSYSTEM=="sound", GROUP="audio"
-
-# ieee1394 devices
-KERNEL=="raw1394", GROUP="disk"
-KERNEL=="dv1394*", GROUP="video"
-KERNEL=="video1394*", GROUP="video"
-
-# input devices
-KERNEL=="event[0-9]*", ATTRS{name}=="*dvb*|*DVB*|* IR *" \
- MODE="0664", GROUP="video"
-KERNEL=="js[0-9]*", MODE="0664"
-KERNEL=="lirc[0-9]*", GROUP="video"
-
-# AOE character devices
-SUBSYSTEM=="aoe", MODE="0220", GROUP="disk"
-SUBSYSTEM=="aoe", KERNEL=="err", MODE="0440"
-
-LABEL="permissions_end"
-
+++ /dev/null
-# debugging monitor
-RUN+="socket:/org/kernel/udev/monitor"
-
-# run a command on remove events
-ACTION=="remove", ENV{REMOVE_CMD}!="", RUN+="$env{REMOVE_CMD}"
-
-# ignore the events generated by virtual consoles
-KERNEL=="ptmx", OPTIONS+="last_rule"
-KERNEL=="console", OPTIONS+="last_rule"
-KERNEL=="tty" , OPTIONS+="last_rule"
-KERNEL=="tty[0-9]*", OPTIONS+="last_rule"
-KERNEL=="pty*", OPTIONS+="last_rule"
-SUBSYSTEM=="vc", OPTIONS+="last_rule"
-
+++ /dev/null
-# There are a number of modifiers that are allowed to be used in some
-# of the different fields. They provide the following subsitutions:
-#
-# %n the "kernel number" of the device.
-# For example, 'sda3' has a "kernel number" of '3'
-# %e the smallest number for that name which does not matches an existing node
-# %k the kernel name for the device
-# %M the kernel major number for the device
-# %m the kernel minor number for the device
-# %b the bus id for the device
-# %c the string returned by the PROGRAM
-# %s{filename} the content of a sysfs attribute
-# %% the '%' char itself
-#
-
-# workaround for devices which do not report media changes
-SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", ATTR{removable}=="1", \
- ENV{ID_MODEL}=="IOMEGA_ZIP*", NAME="%k", OPTIONS+="all_partitions"
-SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", ATTRS{media}=="floppy", \
- OPTIONS+="all_partitions"
-
-# SCSI devices
-SUBSYSTEMS=="scsi", KERNEL=="sr[0-9]*", NAME="scd%n", SYMLINK+="sr%n"
-
-# USB devices
-SUBSYSTEMS=="usb", KERNEL=="auer[0-9]*", NAME="usb/%k"
-SUBSYSTEMS=="usb", KERNEL=="cpad[0-9]*", NAME="usb/%k"
-SUBSYSTEMS=="usb", KERNEL=="dabusb*", NAME="usb/%k"
-SUBSYSTEMS=="usb", KERNEL=="hiddev*", NAME="usb/%k"
-SUBSYSTEMS=="usb", KERNEL=="legousbtower*", NAME="usb/%k"
-SUBSYSTEMS=="usb", KERNEL=="lp[0-9]*", NAME="usb/%k"
-SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", \
- ATTRS{product}=="Palm Handheld*|Handspring Visor|palmOne Handheld", \
- SYMLINK+="pilot"
-
-# usbfs-like devices
-SUBSYSTEM=="usb_device", PROGRAM="/bin/sh -c 'K=%k; K=$${K#usbdev}; printf bus/usb/%%03i/%%03i $${K%%%%.*} $${K#*.}'", ACTION=="add", \
- NAME="%c"
-SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}"
-
-# serial devices
-KERNEL=="capi", NAME="capi20", SYMLINK+="isdn/capi20"
-KERNEL=="capi[0-9]*", NAME="capi/%n"
-
-# video devices
-KERNEL=="dvb*", PROGRAM="/bin/sh -c 'K=%k; K=$${K#dvb}; printf dvb/adapter%%i/%%s $${K%%%%.*} $${K#*.}", ACTION=="add", \
- NAME="%c"
-KERNEL=="card[0-9]*", NAME="dri/%k"
-
-# misc devices
-KERNEL=="hw_random", NAME="hwrng"
-KERNEL=="tun", NAME="net/%k"
-KERNEL=="evtchn", NAME="xen/%k"
-
-KERNEL=="cdemu[0-9]*", NAME="cdemu/%n"
-KERNEL=="pktcdvd[0-9]*", NAME="pktcdvd/%n"
-KERNEL=="pktcdvd", NAME="pktcdvd/control"
-
-KERNEL=="cpu[0-9]*", NAME="cpu/%n/cpuid"
-KERNEL=="msr[0-9]*", NAME="cpu/%n/msr"
-KERNEL=="microcode", NAME="cpu/microcode"
-
-KERNEL=="umad*", NAME="infiniband/%k"
-KERNEL=="issm*", NAME="infiniband/%k"
-KERNEL=="uverbs*", NAME="infiniband/%k"
-KERNEL=="ucm*", NAME="infiniband/%k"
-KERNEL=="rdma_ucm", NAME="infiniband/%k"
-
-# ALSA devices
-KERNEL=="controlC[0-9]*", NAME="snd/%k"
-KERNEL=="hwC[D0-9]*", NAME="snd/%k"
-KERNEL=="pcmC[D0-9cp]*", NAME="snd/%k"
-KERNEL=="midiC[D0-9]*", NAME="snd/%k"
-KERNEL=="timer", NAME="snd/%k"
-KERNEL=="seq", NAME="snd/%k"
-
-# ieee1394 devices
-KERNEL=="dv1394*", NAME="dv1394/%n"
-KERNEL=="video1394*", NAME="video1394/%n"
-
-# input devices
-KERNEL=="mice", NAME="input/%k"
-KERNEL=="mouse[0-9]*", NAME="input/%k"
-KERNEL=="event[0-9]*", NAME="input/%k"
-KERNEL=="js[0-9]*", NAME="input/%k"
-KERNEL=="ts[0-9]*", NAME="input/%k"
-KERNEL=="uinput", NAME="input/%k"
-
-# Zaptel
-KERNEL=="zapctl", NAME="zap/ctl"
-KERNEL=="zaptimer", NAME="zap/timer"
-KERNEL=="zapchannel", NAME="zap/channel"
-KERNEL=="zappseudo", NAME="zap/pseudo"
-KERNEL=="zap[0-9]*", NAME="zap/%n"
-
-# AOE character devices
-SUBSYSTEM=="aoe", KERNEL=="discover", NAME="etherd/%k"
-SUBSYSTEM=="aoe", KERNEL=="err", NAME="etherd/%k"
-SUBSYSTEM=="aoe", KERNEL=="interfaces", NAME="etherd/%k"
-SUBSYSTEM=="aoe", KERNEL=="revalidate", NAME="etherd/%k"
-
-# device mapper creates its own device nodes, so ignore these
-KERNEL=="dm-[0-9]*", OPTIONS+="ignore_device"
-KERNEL=="device-mapper", NAME="mapper/control"
-
-KERNEL=="rfcomm[0-9]*", NAME="%k", GROUP="users", MODE="0660"
-
-# Firmware Helper
-ACTION=="add", SUBSYSTEM=="firmware", RUN+="/lib/udev/firmware.sh"
-
-# Samsung UARTS
-KERNEL=="s3c2410_serial[0-9]", NAME="ttySAC%n"
-
-# MXC UARTs
-KERNEL=="ttymxc[0-4]", NAME="ttymxc%n"
-
+++ /dev/null
-Index: udev-141/extras/volume_id/lib/Makefile.am
-===================================================================
---- udev-141.orig/extras/volume_id/lib/Makefile.am 2009-05-17 23:36:16.000000000 +0100
-+++ udev-141/extras/volume_id/lib/Makefile.am 2009-05-17 23:36:26.000000000 +0100
-@@ -54,19 +54,6 @@
- -version-info $(VOLID_LT_CURRENT):$(VOLID_LT_REVISION):$(VOLID_LT_AGE) \
- -export-symbols $(top_srcdir)/extras/volume_id/lib/exported_symbols
-
--# move devel files to $(prefix)$(libdir_name) if needed
--install-data-hook:
-- rm $(DESTDIR)$(rootlibdir)/libvolume_id.la
-- if test "$(prefix)" != "$(exec_prefix)"; then \
-- mkdir -p $(DESTDIR)$(prefix)/$(libdir_name); \
-- mv $(DESTDIR)$(rootlibdir)/libvolume_id.a $(DESTDIR)$(prefix)/$(libdir_name)/; \
-- so_img_name=$$(readlink $(DESTDIR)$(rootlibdir)/libvolume_id.so); \
-- rm $(DESTDIR)$(rootlibdir)/libvolume_id.so; \
-- so_img_rel_target_prefix=$$(echo $(prefix)/$(libdir_name) | sed 's,\(^/\|\)[^/][^/]*,..,g'); \
-- ln -sf $$so_img_rel_target_prefix$(exec_prefix)/$(libdir_name)/$$so_img_name \
-- $(DESTDIR)$(prefix)/$(libdir_name)/libvolume_id.so; \
-- fi
--
- EXTRA_DIST = \
- exported_symbols
-
+++ /dev/null
-DESCRIPTION = "udev is a daemon which dynamically creates and removes device nodes from \
-/dev/, handles hotplug events and loads drivers at boot time. It replaces \
-the hotplug package and requires a kernel not older than 2.6.12."
-RPROVIDES_${PN} = "hotplug"
-
-PR = "r17"
-
-SRC_URI = "http://kernel.org/pub/linux/utils/kernel/hotplug/udev-${PV}.tar.gz \
- file://noasmlinkage.patch;patch=1 \
- file://flags.patch;patch=1 \
- file://udevsynthesize.patch;patch=1 \
- file://udevsynthesize.sh \
- file://arm_inotify_fix.patch;patch=1 \
- "
-
-SRC_URI_append_h2200 = " file://50-hostap_cs.rules "
-PACKAGE_ARCH_h2200 = "h2200"
-
-require udev.inc
-
-INITSCRIPT_PARAMS = "start 03 S ."
-
-FILES_${PN} += "${base_libdir}/udev/*"
-FILES_${PN}-dbg += "${base_libdir}/udev/.debug"
-UDEV_EXTRAS = "extras/firmware/ extras/scsi_id/ extras/volume_id/ extras/run_directory/"
-EXTRA_OEMAKE += "libudevdir=/lib/udev libdir=${base_libdir} prefix="
-
-do_install () {
- install -d ${D}${usrsbindir} \
- ${D}${sbindir}
- oe_runmake 'DESTDIR=${D}' INSTALL=install install
- install -d ${D}${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/udev
- install -m 0755 ${WORKDIR}/udev-cache ${D}${sysconfdir}/init.d/udev-cache
-
- install -d ${D}${sysconfdir}/udev/rules.d/
-
- install -m 0644 ${WORKDIR}/local.rules ${D}${sysconfdir}/udev/rules.d/local.rules
- install -m 0644 ${WORKDIR}/permissions.rules ${D}${sysconfdir}/udev/rules.d/permissions.rules
- install -m 0644 ${WORKDIR}/udev.rules ${D}${sysconfdir}/udev/rules.d/udev.rules
- install -m 0644 ${WORKDIR}/links.conf ${D}${sysconfdir}/udev/links.conf
- if [ "${UDEV_DEVFS_RULES}" = "1" ]; then
- install -m 0644 ${WORKDIR}/devfs-udev.rules ${D}${sysconfdir}/udev/rules.d/devfs-udev.rules
- fi
-
- install -d ${D}${sysconfdir}/udev/scripts/
-
- install -m 0755 ${WORKDIR}/mount.sh ${D}${sysconfdir}/udev/scripts/mount.sh
- install -m 0755 ${WORKDIR}/network.sh ${D}${sysconfdir}/udev/scripts
-
- install -d ${D}${base_libdir}/udev/
- install -m 0755 ${S}/udevsynthesize ${D}${base_libdir}/udev/udevsynthesize
- install -m 0755 ${WORKDIR}/udevsynthesize.sh ${D}${sbindir}/udevsynthesize
-}
-
-do_install_append_h2200() {
- install -m 0644 ${WORKDIR}/50-hostap_cs.rules ${D}${sysconfdir}/udev/rules.d/50-hostap_cs.rules
-}
+++ /dev/null
-DESCRIPTION = "udev is a daemon which dynamically creates and removes device nodes from \
-/dev/, handles hotplug events and loads drivers at boot time. It replaces \
-the hotplug package and requires a kernel not older than 2.6.12."
-RPROVIDES_${PN} = "hotplug"
-
-PR = "r5"
-
-SRC_URI = "http://kernel.org/pub/linux/utils/kernel/hotplug/udev-${PV}.tar.gz \
- file://noasmlinkage.patch;patch=1 \
- file://flags.patch;patch=1 \
- file://vol_id_ld.patch;patch=1 \
- file://udevtrigger_add_devname_filtering.patch;patch=1 \
- "
-
-SRC_URI_append_h2200 = " file://50-hostap_cs.rules "
-PACKAGE_ARCH_h2200 = "h2200"
-
-require udev.inc
-
-INITSCRIPT_PARAMS = "start 03 S ."
-
-FILES_${PN} += "${base_libdir}/udev/*"
-FILES_${PN}-dbg += "${base_libdir}/udev/.debug"
-UDEV_EXTRAS = "extras/firmware/ extras/scsi_id/ extras/volume_id/"
-EXTRA_OEMAKE += "libudevdir=/lib/udev libdir=${base_libdir} prefix="
-
-do_install () {
- install -d ${D}${usrsbindir} \
- ${D}${sbindir}
- oe_runmake 'DESTDIR=${D}' INSTALL=install install
- install -d ${D}${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/udev
- install -m 0755 ${WORKDIR}/udev-cache ${D}${sysconfdir}/init.d/udev-cache
-
- install -d ${D}${sysconfdir}/udev/rules.d/
-
- install -m 0644 ${WORKDIR}/local.rules ${D}${sysconfdir}/udev/rules.d/local.rules
- install -m 0644 ${WORKDIR}/permissions.rules ${D}${sysconfdir}/udev/rules.d/permissions.rules
- install -m 0644 ${WORKDIR}/udev.rules ${D}${sysconfdir}/udev/rules.d/udev.rules
- install -m 0644 ${WORKDIR}/links.conf ${D}${sysconfdir}/udev/links.conf
- if [ "${UDEV_DEVFS_RULES}" = "1" ]; then
- install -m 0644 ${WORKDIR}/devfs-udev.rules ${D}${sysconfdir}/udev/rules.d/devfs-udev.rules
- fi
-
- install -d ${D}${sysconfdir}/udev/scripts/
-
- install -m 0755 ${WORKDIR}/mount.sh ${D}${sysconfdir}/udev/scripts/mount.sh
- install -m 0755 ${WORKDIR}/network.sh ${D}${sysconfdir}/udev/scripts
-
- install -d ${D}${base_libdir}/udev/
-}
-
-do_install_append_h2200() {
- install -m 0644 ${WORKDIR}/50-hostap_cs.rules ${D}${sysconfdir}/udev/rules.d/50-hostap_cs.rules
-}
+++ /dev/null
-DESCRIPTION = "udev is a daemon which dynamically creates and removes device nodes from \
-/dev/, handles hotplug events and loads drivers at boot time. It replaces \
-the hotplug package and requires a kernel not older than 2.6.12."
-RPROVIDES_${PN} = "hotplug"
-
-PR = "r10"
-
-SRC_URI = "http://kernel.org/pub/linux/utils/kernel/hotplug/udev-${PV}.tar.gz \
- file://noasmlinkage.patch;patch=1 \
- file://flags.patch;patch=1 \
- file://vol_id_ld.patch;patch=1 \
- file://udevtrigger_add_devname_filtering.patch;patch=1 \
- file://run.rules \
- "
-
-SRC_URI_append_h2200 = " file://50-hostap_cs.rules "
-PACKAGE_ARCH_h2200 = "h2200"
-
-require udev.inc
-
-INITSCRIPT_PARAMS = "start 03 S ."
-
-FILES_${PN} += "${base_libdir}/udev/*"
-FILES_${PN}-dbg += "${base_libdir}/udev/.debug"
-UDEV_EXTRAS = "extras/firmware/ extras/scsi_id/ extras/volume_id/"
-EXTRA_OEMAKE += "libudevdir=/lib/udev libdir=${base_libdir} prefix="
-
-do_install () {
- install -d ${D}${usrsbindir} \
- ${D}${sbindir}
- oe_runmake 'DESTDIR=${D}' INSTALL=install install
- install -d ${D}${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/udev
- install -m 0755 ${WORKDIR}/udev-cache ${D}${sysconfdir}/init.d/udev-cache
-
- install -d ${D}${sysconfdir}/udev/rules.d/
-
- install -m 0644 ${WORKDIR}/local.rules ${D}${sysconfdir}/udev/rules.d/local.rules
- install -m 0644 ${WORKDIR}/permissions.rules ${D}${sysconfdir}/udev/rules.d/permissions.rules
- install -m 0644 ${WORKDIR}/run.rules ${D}${sysconfdir}/udev/rules.d/run.rules
- install -m 0644 ${WORKDIR}/udev.rules ${D}${sysconfdir}/udev/rules.d/udev.rules
- install -m 0644 ${WORKDIR}/links.conf ${D}${sysconfdir}/udev/links.conf
- if [ "${UDEV_DEVFS_RULES}" = "1" ]; then
- install -m 0644 ${WORKDIR}/devfs-udev.rules ${D}${sysconfdir}/udev/rules.d/devfs-udev.rules
- fi
-
- # Remove some default rules that don't work well on embedded devices
- rm ${D}${sysconfdir}/udev/rules.d/60-persistent-input.rules
- rm ${D}${sysconfdir}/udev/rules.d/60-persistent-storage.rules
- rm ${D}${sysconfdir}/udev/rules.d/60-persistent-storage-tape.rules
-
- install -d ${D}${sysconfdir}/udev/scripts/
-
- install -m 0755 ${WORKDIR}/mount.sh ${D}${sysconfdir}/udev/scripts/mount.sh
- install -m 0755 ${WORKDIR}/network.sh ${D}${sysconfdir}/udev/scripts
-
- install -d ${D}${base_libdir}/udev/
-}
-
-do_install_append_h2200() {
- install -m 0644 ${WORKDIR}/50-hostap_cs.rules ${D}${sysconfdir}/udev/rules.d/50-hostap_cs.rules
-}
+++ /dev/null
-DESCRIPTION = "udev is a daemon which dynamically creates and removes device nodes from \
-/dev/, handles hotplug events and loads drivers at boot time. It replaces \
-the hotplug package and requires a kernel not older than 2.6.12."
-RPROVIDES_${PN} = "hotplug"
-
-PR = "r8"
-
-SRC_URI = "http://kernel.org/pub/linux/utils/kernel/hotplug/udev-${PV}.tar.gz \
- file://noasmlinkage.patch;patch=1 \
- file://unbreak.patch;patch=1 \
- file://run.rules \
- "
-
-SRC_URI_append_h2200 = " file://50-hostap_cs.rules "
-PACKAGE_ARCH_h2200 = "h2200"
-
-require udev.inc
-
-FILES_${PN} += "${base_libdir}/udev/*"
-FILES_${PN}-dbg += "${base_libdir}/udev/.debug"
-UDEV_EXTRAS = "extras/firmware/ extras/scsi_id/ extras/volume_id/"
-#EXTRA_OEMAKE += "libudevdir=/lib/udev libdir=${base_libdir} prefix="
-
-exec_prefix = ""
-
-EXTRA_OECONF = "--with-udev-prefix="
-
-do_install () {
- install -d ${D}${usrsbindir} \
- ${D}${sbindir}
- oe_runmake 'DESTDIR=${D}' INSTALL=install install
- install -d ${D}${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/udev
- install -m 0755 ${WORKDIR}/udev-cache ${D}${sysconfdir}/init.d/udev-cache
-
- install -d ${D}${sysconfdir}/udev/rules.d/
-
- cp ${S}/rules/rules.d/* ${D}${sysconfdir}/udev/rules.d/
- cp ${S}/rules/packages/* ${D}${sysconfdir}/udev/rules.d/
- install -m 0644 ${WORKDIR}/local.rules ${D}${sysconfdir}/udev/rules.d/local.rules
- #install -m 0644 ${WORKDIR}/permissions.rules ${D}${sysconfdir}/udev/rules.d/permissions.rules
- #install -m 0644 ${WORKDIR}/run.rules ${D}${sysconfdir}/udev/rules.d/run.rules
- #install -m 0644 ${WORKDIR}/udev.rules ${D}${sysconfdir}/udev/rules.d/udev.rules
- install -m 0644 ${WORKDIR}/links.conf ${D}${sysconfdir}/udev/links.conf
- #if [ "${UDEV_DEVFS_RULES}" = "1" ]; then
- # install -m 0644 ${WORKDIR}/devfs-udev.rules ${D}${sysconfdir}/udev/rules.d/devfs-udev.rules
- #fi
-
- # Remove some default rules that don't work well on embedded devices
- #rm ${D}${sysconfdir}/udev/rules.d/60-persistent-input.rules
- #rm ${D}${sysconfdir}/udev/rules.d/60-persistent-storage.rules
- #rm ${D}${sysconfdir}/udev/rules.d/60-persistent-storage-tape.rules
-
- install -d ${D}${sysconfdir}/udev/scripts/
-
- install -m 0755 ${WORKDIR}/mount.sh ${D}${sysconfdir}/udev/scripts/mount.sh
- install -m 0755 ${WORKDIR}/network.sh ${D}${sysconfdir}/udev/scripts
-
- install -d ${D}${base_libdir}/udev/
-}
-
-do_install_append_h2200() {
- install -m 0644 ${WORKDIR}/50-hostap_cs.rules ${D}${sysconfdir}/udev/rules.d/50-hostap_cs.rules
-}
-
