#use this for a hx2xxx ipaq
#PREFERRED_PROVIDER_virtual/kernel = "linux-openzaurus"
-PREFERRED_VERSIONS_handhelds-pxa-2.6 = "2.6.12-hh3"
-
PREFERRED_VERSION_orinoco-modules = "0.15rc1"
ROOT_FLASH_SIZE = "80"
-e 256KiB -p"
MODUTILS = "26"
+PCMCIA_MANAGER = "pcmciautils"
BOOTSTRAP_EXTRA_RDEPENDS = "kernel ipaq-boot-params "
BOOTSTRAP_EXTRA_RRECOMMENDS += "${@linux_module_packages('${PXA270_MODULES}', d)}"
BOOTSTRAP_EXTRA_RDEPENDS_append = " udev module-init-tools"
include conf/machine/include/handheld-common.conf
GUI_MACHINE_CLASS = "bigscreen"
-GPE_EXTRA_INSTALL += "gaim"
# Use tune-xscale per default. Machine independent feeds should be built with tune-strongarm.
include conf/machine/include/tune-xscale.conf
hx4700_ts hx4700_wlan snd_hx4700_audio hx4700_power"
-
+module_autoload_evdev = "evdev"
module_autoload_hx4700_power = "hx4700_power"
module_autoload_pcmcia = "pcmcia"
module_autoload_hx4700_pcmcia = "hx4700_pcmcia"
file://arm-softfloat.patch;patch=1 \
file://ldflags.patch;patch=1"
+# uclibc patches below
+SRC_URI_append = " file://100-uclibc-conf.patch;patch=1 \
+ file://200-uclibc-locale.patch;patch=1 \
+ file://301-missing-execinfo_h.patch;patch=1 \
+ file://302-c99-snprintf.patch;patch=1 \
+ file://303-c99-complex-ugly-hack.patch;patch=1 \
+ file://800-arm-bigendian.patch;patch=1 \
+ file://zecke-host-cpp-ac-hack.patch;patch=1 "
+
+
include gcc4-build.inc
test -f /usr/sbin/lircd || exit 0
+test -f /etc/lircd.conf || exit 0
case "$1" in
start)
test -f /usr/bin/irexec || exit 0
+test -f /etc/lircrc || exit 0
case "$1" in
start)
echo -n "Starting lircexec daemon: irexec"
- start-stop-daemon --start --quiet --exec /usr/bin/irexec
+ start-stop-daemon --start --quiet --exec /usr/bin/irexec -- --daemon
echo "."
;;
stop)
start-stop-daemon --stop --quiet --exec /usr/bin/irexec
sleep 1
echo -n "Starting lircexec daemon: irexec"
- start-stop-daemon --start --quiet --exec /usr/bin/irexec
+ start-stop-daemon --start --quiet --exec /usr/bin/irexec -- --daemon
echo "."
;;
*)
MAINTAINER = "Rene Wagner <rw@handhelds.org>"
SECTION = "libs"
DEPENDS = "gmp"
-PR = "r1"
+PR = "r2"
SRC_URI = "http://www.mpfr.org/mpfr-${PV}/mpfr-${PV}.tar.bz2"
S = "${WORKDIR}/mpfr-${PV}"
bindir=${STAGING_BINDIR} \
includedir=${STAGING_INCDIR} \
libdir=${STAGING_LIBDIR} \
- datadir=${STAGING_DATADIR}
+ datadir=${STAGING_DATADIR} \
+ infodir=${STAGING_DIR}/${HOST_SYS}/info
}
# Ethernet/RNDIS gadget (g_ether)
# ... or on host side, usbnet and random hwaddr
-iface usb0 inet dhcp
+iface usb0 inet static
+ address 192.168.0.202
+ netmask 255.255.255.0
+ network 192.168.0.0
+ gateway 192.168.0.200
+
# Zaurus 2.4 Lineo net_fd; obsolete
-iface usbd0 inet dhcp
+iface usbd0 inet static
+ address 192.168.129.201
+ netmask 255.255.255.0
+ network 192.168.129.0
+ gateway 192.168.129.200
# iPAQ 2.4 mach-sa1100/usb-eth
# (192.168.0.202 is the iPAQ's IP, 192.168.0.200 is the host's IP)
SECTION = "base"
SRC_URI = "file://header-c700.bin"
LICENSE = "sharp-binary-only"
+COMPATIBLE_MACHINE = '(c7x0|spitz|akita)'
do_stage() {
install -d ${STAGING_LIBDIR}/sharp-flash-header
install -m 0644 ${WORKDIR}/header-c700.bin ${STAGING_LIBDIR}/sharp-flash-header/header-c700.bin
LICENSE = "LGPL"
SECTION = "libs"
PRIORITY = "optional"
-MAINTAINER = "Phil Blundell <pb@nexus.co.uk>"
+MAINTAINER = "Phil Blundell <pb@handhelds.org>"
DEPENDS = "libx11"
PR = "r1"
}
do_stage () {
- oe_runmake install DESTDIR="" bindir=${STAGING_BINDIR} includedir=${STAGING_INCDIR} libdir=${STAGING_LIBDIR} prefix=${STAGING_DIR}
+ autotools_stage_all
}
;;
*)
TSLIB_TSDEVICE=`detect-stylus --device`
- TSLIB_CONFFILE=/usr/share/tslib/ts.conf-h3600
+ TSLIB_CONFFILE=/usr/share/tslib/ts-2.6.conf
;;
esac
;;
*)
TSLIB_TSDEVICE=/dev/input/event0
- TSLIB_CONFFILE=/usr/share/tslib/ts.conf-simpad
+ TSLIB_CONFFILE=/usr/share/tslib/ts-2.6.conf
;;
esac
MOUNT="/bin/mount"
PMOUNT="/usr/bin/pmount"
UMOUNT="/bin/umount"
+name="`basename "$DEVNAME"`"
+
+for line in `cat /etc/udev/mount.blacklist | grep -v ^#`
+do
+ if ( echo "$DEVNAME" | grep -q "$line" )
+ then
+ logger "udev/mount.sh" "[$DEVNAME] is blacklisted, ignoring"
+ exit 0
+ fi
+done
+
+automount() {
+ ! test -d "/media/$name" && mkdir -p "/media/$name"
+
+ if ! $MOUNT -t auto -o sync $DEVNAME "/media/$name"
+ then
+ #logger "mount.sh/automount" "$MOUNT -t auto $DEVNAME \"/media/$name\" failed!"
+ rm_dir "/media/$name"
+ else
+ logger "mount.sh/automount" "Auto-mount of [/media/$name] successful"
+ touch "/tmp/.automount-$name"
+ fi
+}
+
+rm_dir() {
+ # We do not want to rm -r populated directories
+ if test "`find "$1" | wc -l | tr -d " "`" -lt 2 -a -d "$1"
+ then
+ ! test -z "$1" && rm -r "$1"
+ else
+ logger "mount.sh/automount" "Not removing non-empty directory [$1]"
+ fi
+}
if [ "$ACTION" = "add" ] && [ -n "$DEVNAME" ]; then
if [ -x "$PMOUNT" ]; then
elif [ -x $MOUNT ]; then
$MOUNT $DEVNAME 2> /dev/null
fi
+
+ # If the device isn't mounted at this point, it isn't configured in fstab
+ cat /proc/mounts | awk '{print $1}' | grep -q "^$DEVNAME$" || automount
+
fi
+
+
if [ "$ACTION" = "remove" ] && [ -x "$UMOUNT" ] && [ -n "$DEVNAME" ]; then
for mnt in `cat /proc/mounts | grep "$DEVNAME" | cut -f 2 -d " " `
do
$UMOUNT $mnt
done
+
+ # Remove empty directories from auto-mounter
+ test -e "/tmp/.automount-$name" && rm_dir "/media/$name"
fi
# We get two "add" events for hostap cards due to wifi0
echo "$INTERFACE" | grep -q wifi && exit 0
+
+# Check if /etc/init.d/network has been run yet to see if we are
+# called by starting /etc/rcS.d/S03udev and not by hotplugging a device
+#
+# At this stage, network interfaces should not be brought up
+# automatically because:
+# a) /etc/init.d/network has not been run yet (security issue)
+# b) /var has not been populated yet so /etc/resolv,conf points to
+# oblivion, making the network unusable
+#
+
+spoofp="`grep ^spoofprotect /etc/network/options`"
+if test -z "$spoofp"
+then
+ # This is the default from /etc/init.d/network
+ spoofp_val=yes
+else
+ spoofp_val=${spoofp#spoofprotect=}
+fi
+
+test "$spoofp_val" = yes && spoofp_val=1 || spoofp_val=0
+
+# I think it is safe to assume that "lo" will always be there ;)
+if test "`cat /proc/sys/net/ipv4/conf/lo/rp_filter`" != "$spoofp_val" -a -n "$spoofp_val"
+then
+ echo "$INTERFACE" >> /dev/udev_network_queue
+ exit 0
+fi
+
#
# Code taken from pcmcia-cs:/etc/pcmcia/network
#
if grep -q "iface \+$INTERFACE" /etc/network/interfaces; then
case $ACTION in
add)
- ifup $INTERFACE
+ ifconfig | grep -q "^$INTERFACE" || ifup $INTERFACE
;;
remove)
ifdown $INTERFACE
--- /dev/null
+# Useful flags:
+# -i <ifname> Interface (required, unless specified in config)
+# -D <driver> Wireless Driver
+# -d Debugging (-dd for more)
+# -q Quiet (-qq for more)
+
+CONFIG="/etc/wpa_supplicant.conf"
+OPTIONS="-i eth1 -D wext"
--- /dev/null
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cass, these lines should use += in order not
+# to override previous values of the variables.
+
+CFLAGS = $(TARGET_CFLAGS) -I../hostapd -I../utils -I../driver/modules -Wall -MMD
+LIBS = $(TARGET_LDFLAGS)
+
+# Driver interface for Host AP driver
+CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for Agere driver
+#CONFIG_DRIVER_HERMES=n
+
+# Driver interface for madwifi driver
+#CONFIG_DRIVER_MADWIFI=y
+
+# Driver interface for Prism54 driver
+#CONFIG_DRIVER_PRISM54=y
+
+# Driver interface for ndiswrapper
+#CONFIG_DRIVER_NDISWRAPPER=y
+
+# Driver interface for Atmel driver
+#CONFIG_DRIVER_ATMEL=y
+
+# Driver interface for Broadcom driver
+#CONFIG_DRIVER_BROADCOM=y
+
+# Driver interface for Intel ipw2100 driver
+#CONFIG_DRIVER_IPW2100=y
+
+# Driver interface for generic Linux wireless extensions
+CONFIG_DRIVER_WEXT=y
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+
+# Driver interface for development testing
+#CONFIG_DRIVER_TEST=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
+# included)
+CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5 (automatically included if EAP-TTLS is enabled)
+CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled)
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+CONFIG_EAP_TTLS=y
+
+# EAP-GTC
+CONFIG_EAP_GTC=y
+
+# EAP-OTP
+CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-PAX
+#CONFIG_EAP_PAX=y
+
+# LEAP
+CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Replace native Linux implementation of packet sockets with libdnet/libpcap.
+# This will be automatically set for non-Linux OS.
+#CONFIG_DNET_PCAP=y
+
+# Include control interface for external programs, e.g, wpa_cli
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operatins system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+# eloop_none = Empty template
+#CONFIG_ELOOP=eloop
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# none = Empty template
+#CONFIG_L2_PACKET=linux
+
+# IEEE 802.11i/IEEE 802.11e STAKey negotiation for direct link connection
+#CONFIG_STAKEY=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
+# none = Empty template
+CONFIG_TLS=gnutls
+
+# Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
+# You need CONFIG_TLS=gnutls for this to have any effect. Please note that
+# even though the core GnuTLS library is released under LGPL, this extra
+# library uses GPL and as such, the terms of GPL apply to the combination
+# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
+# apply for distribution of the resulting binary.
+CONFIG_GNUTLS_EXTRA=y
+
--- /dev/null
+# Useful flags:
+# -i <ifname> Interface (required, unless specified in config)
+# -D <driver> Wireless Driver
+# -d Debugging (-dd for more)
+# -q Quiet (-qq for more)
+
+CONFIG="/etc/wpa_supplicant.conf"
+OPTIONS="-i ath0 -D madwifi"
--- /dev/null
+ctrl_interface=/var/run/wpa_supplicant
+ctrl_interface_group=0
+update_config=1
+
+network={
+ key_mgmt=NONE
+}
--- /dev/null
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cass, these lines should use += in order not
+# to override previous values of the variables.
+
+CFLAGS = $(TARGET_CFLAGS) -I../hostapd -I../utils -I../driver/modules -Wall -MMD
+
+# for wpa_supplicant, wpa_cli
+LIBS = $(TARGET_LDFLAGS)
+
+# for wpa_passphrase:
+LIBS_p = $(TARGET_LDFLAGS)
+
+
+# Uncomment following two lines and fix the paths if you have installed openssl
+# in non-default location
+#CFLAGS += -I/usr/local/openssl/include
+#LIBS += -L/usr/local/openssl/lib
+
+# Example configuration for various cross-compilation platforms
+
+#### sveasoft (e.g., for Linksys WRT54G) ######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
+#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
+###############################################################################
+
+#### openwrt (e.g., for Linksys WRT54G) #######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
+# -I../WRT54GS/release/src/include
+#LIBS = -lssl
+###############################################################################
+
+
+# Driver interface for Host AP driver
+#CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for Agere driver
+#CONFIG_DRIVER_HERMES=y
+
+# Driver interface for madwifi driver
+#CONFIG_DRIVER_MADWIFI=y
+# Change include directories to match with the local setup
+#CFLAGS += -I../madwifi/wpa
+
+# Driver interface for Prism54 driver
+#CONFIG_DRIVER_PRISM54=y
+
+# Driver interface for ndiswrapper
+#CONFIG_DRIVER_NDISWRAPPER=y
+
+# Driver interface for Atmel driver
+#CONFIG_DRIVER_ATMEL=y
+
+# Driver interface for Broadcom driver
+#CONFIG_DRIVER_BROADCOM=y
+# Example path for wlioctl.h; change to match your configuration
+#CFLAGS += -I/opt/WRT54GS/release/src/include
+
+# Driver interface for Intel ipw2100 driver
+#CONFIG_DRIVER_IPW2100=y
+
+# Driver interface for the Zydas zd1211 driver
+CONFIG_DRIVER_ZD1211=y
+
+# Driver interface for generic Linux wireless extensions
+CONFIG_DRIVER_WEXT=y
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+
+# Driver interface for development testing
+#CONFIG_DRIVER_TEST=y
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
+# included)
+CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5 (automatically included if EAP-TTLS is enabled)
+CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled)
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+CONFIG_EAP_TTLS=y
+
+# EAP-GTC
+CONFIG_EAP_GTC=y
+
+# EAP-OTP
+CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# LEAP
+CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Replace native Linux implementation of packet sockets with libdnet/libpcap.
+# This will be automatically set for non-Linux OS.
+#CONFIG_DNET_PCAP=y
+
+# Include control interface for external programs, e.g, wpa_cli
+CONFIG_CTRL_IFACE=y
+
+# Include interface for using external supplicant (Xsupplicant) for EAP
+# authentication
+#CONFIG_XSUPPLICANT_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
--- /dev/null
+--- /dev/null
++++ wpa_supplicant-0.4.7/driver_hermes.c
+@@ -0,0 +1,705 @@
++/*
++ * WPA Supplicant - testing driver interface
++ * Copyright (c) 2004-2005, Jouni Malinen <jkmaline@cc.hut.fi>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Alternatively, this software may be distributed under the terms of BSD
++ * license.
++ *
++ * See README and COPYING for more details.
++ */
++
++#include <stdlib.h>
++#include <stdio.h>
++#include <unistd.h>
++#include <string.h>
++#include <sys/ioctl.h>
++#include <errno.h>
++#include <net/if_arp.h>
++
++#include "wireless_copy.h"
++#include "common.h"
++#include "driver.h"
++
++#include "eloop.h"
++#include "wpa_supplicant.h"
++#include "priv_netlink.h"
++
++#include "hostap_common.h"
++#include "driver_wext.h"
++#include "driver_hermes.h"
++
++
++
++/* Enumeration for supported Hermes Types */
++enum
++{
++ WL_HERMES_UNKNOWN = 0,
++ WL_HERMES_1 = 1,
++ WL_HERMES_2 = 2,
++ WL_HERMES_25 = 3
++};
++
++
++
++
++struct wpa_driver_hermes_data {
++ void *wext; /* private data for driver_wext */
++ void *ctx;
++ char ifname[IFNAMSIZ + 1];
++ int sock;
++ int type;
++};
++
++
++
++/****************************************************************************/
++/* */
++/* Routines for basic device access to Agere Hermes-I/Hermes-II via the UIL */
++/* */
++/****************************************************************************/
++
++IFBP _connect(void *priv)
++{
++ struct wpa_driver_hermes_data *drv = priv;
++ int result = 0;
++ IFBP ifbp = NULL;
++ struct uilreq urq;
++
++ //wpa_printf(MSG_DEBUG, "%s: %s %d", __FUNCTION__, drv->ifname, drv->sock);
++
++ memset(&urq, 0, sizeof(urq));
++
++ strcpy(urq.ifr_name, drv->ifname);
++ urq.command = UIL_FUN_CONNECT;
++
++ result = ioctl(drv->sock, WVLAN2_IOCTL_UIL, &urq);
++ if (result == 0 && urq.result == UIL_SUCCESS) {
++ ifbp = urq.hcfCtx;
++ } else {
++ wpa_printf(MSG_DEBUG, "%s: could not set IFBP, result %d", __FUNCTION__, result);
++ }
++
++ return ifbp;
++}
++
++
++void _disconnect(void *priv, IFBP ifbp)
++{
++ struct wpa_driver_hermes_data *drv = priv;
++ int result = 0;
++ struct uilreq urq;
++
++ //wpa_printf(MSG_DEBUG, "%s: %s", __FUNCTION__, drv->ifname);
++
++ if (ifbp != NULL) {
++ memset(&urq, 0, sizeof(struct uilreq));
++
++ strcpy(urq.ifr_name, drv->ifname);
++ urq.command = UIL_FUN_DISCONNECT;
++ urq.hcfCtx = ifbp;
++
++ result = ioctl(drv->sock, WVLAN2_IOCTL_UIL, &urq);
++
++ if (result != 0 || urq.result != UIL_SUCCESS) {
++ wpa_printf( MSG_WARNING, "wl_disconnect(): ioctl() failed, errno: %d", errno );
++ wpa_printf( MSG_WARNING, "wl_disconnect(): urq.result: %d", urq.result );
++ }
++ } else {
++ wpa_printf(MSG_WARNING, "wl_disconnect(): called with NULL ifbp");
++ }
++
++ return;
++}
++
++int _get_info(void *priv, ltv_t *ltv)
++{
++ struct wpa_driver_hermes_data *drv = priv;
++ int result = 0;
++ IFBP ifbp = NULL;
++ struct uilreq urq;
++
++ //wpa_printf(MSG_DEBUG, "%s: %s", __FUNCTION__, drv->ifname);
++
++ /* First, connect to the device */
++ ifbp = _connect(priv);
++ if (ifbp != NULL && ltv != NULL) {
++ memset(&urq, 0, sizeof(struct uilreq));
++
++ strcpy(urq.ifr_name, drv->ifname);
++ urq.hcfCtx = ifbp;
++ urq.command = UIL_FUN_GET_INFO;
++ urq.len = sizeof(ltv_t);
++ urq.data = ltv;
++
++ result = ioctl(drv->sock, WVLAN2_IOCTL_UIL, &urq);
++
++ if (result != 0 || urq.result != UIL_SUCCESS) {
++ wpa_printf(MSG_WARNING, "wl_disconnect(): ioctl() failed, errno: %d", errno);
++ wpa_printf(MSG_WARNING, "wl_disconnect(): urq.result: %d", urq.result);
++ }
++ _disconnect(priv, ifbp);
++ } else {
++ wpa_printf( MSG_WARNING, "Could not connect to the device, or LTV NULL");
++ result = -1;
++ }
++
++ return result;
++}
++
++int _put_info(void *priv, ltv_t *ltv)
++{
++ struct wpa_driver_hermes_data *drv = priv;
++ int result = 0;
++ IFBP ifbp = NULL;
++ struct uilreq urq;
++
++ //wpa_printf(MSG_DEBUG, "%s: %s", __FUNCTION__, drv->ifname);
++
++ /* First, connect to the device */
++ ifbp = _connect(priv);
++ if (ifbp != NULL && ltv != NULL) {
++ memset(&urq, 0, sizeof(struct uilreq));
++
++ strcpy(urq.ifr_name, drv->ifname);
++ urq.hcfCtx = ifbp;
++ urq.command = UIL_FUN_PUT_INFO;
++ urq.len = sizeof( ltv_t );
++ urq.data = ltv;
++
++ result = ioctl(drv->sock, WVLAN2_IOCTL_UIL, &urq);
++
++ if (result != 0 || urq.result != UIL_SUCCESS) {
++ wpa_printf(MSG_WARNING, "_put_info(): ioctl() failed, errno: %d", errno);
++ wpa_printf(MSG_WARNING, "_put_info(): urq.result: %d", urq.result);
++ }
++
++ _disconnect(priv, ifbp);
++ } else {
++ wpa_printf(MSG_WARNING, "%s: could not connect to the device, or LTV NULL", __FUNCTION__ );
++ result = -1;
++ }
++
++ return result;
++}
++
++
++static void _detect_hermes_type(void *priv)
++{
++ struct wpa_driver_hermes_data *drv = priv;
++ CFG_FW_IDENTITY_STRCT *fw_id;
++ ltv_t ltv;
++ int result;
++
++ //wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);
++
++ drv->type = WL_HERMES_UNKNOWN;
++
++ if (drv->sock >= 0) {
++ fw_id = (CFG_FW_IDENTITY_STRCT *)<v;
++ fw_id->len = ( sizeof(CFG_FW_IDENTITY_STRCT) / sizeof( hcf_16 )) - 1;
++ fw_id->typ = CFG_FW_IDENTITY;
++
++ result = _get_info(priv, (ltv_t *)fw_id);
++ if (result == HCF_SUCCESS) {
++ //wpa_printf(MSG_DEBUG, "PRI CompID : %d", fw_id->comp_id);
++ //wpa_printf(MSG_DEBUG, "PRI Variant : %d", fw_id->variant);
++ //wpa_printf(MSG_DEBUG, "PRI Version : %d.%02d", fw_id->version_major, fw_id->version_minor);
++
++ switch(fw_id->comp_id) {
++ case COMP_ID_FW_STA:
++ switch (fw_id->variant) {
++ case 1:
++ case 2:
++ wpa_printf(MSG_DEBUG, "found Hermes 1 STA");
++ drv->type = WL_HERMES_1;
++ break;
++
++ case 3:
++ wpa_printf(MSG_DEBUG, "found Hermes 2 STA");
++ drv->type = WL_HERMES_2;
++ break;
++ case 4:
++ wpa_printf(MSG_DEBUG, "found Hermes 2.5 STA");
++ drv->type = WL_HERMES_25;
++ break;
++ }
++ break;
++
++ case COMP_ID_FW_AP:
++ switch (fw_id->variant) {
++ case 1:
++ wpa_printf(MSG_DEBUG, "found Hermes 1 AP");
++ drv->type = WL_HERMES_1;
++ break;
++
++ case 2:
++ wpa_printf(MSG_DEBUG, "found Hermes 2 AP" );
++ drv->type = WL_HERMES_2;
++ break;
++ }
++ break;
++
++ default:
++ wpa_printf(MSG_WARNING, "could not detect Hermes type!");
++ break;
++ }
++ }
++ }
++}
++
++
++
++/****************************************************************************/
++
++
++static int wpa_driver_hermes_set_wpa_ie(void *priv, const char *wpa_ie,
++ size_t wpa_ie_len)
++{
++ struct wpa_driver_hermes_data *drv = priv;
++ ltv_t ltv;
++
++ wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);
++
++ ltv.len = 2;
++ ltv.typ = CFG_SET_WPA_AUTH_KEY_MGMT_SUITE;
++
++ switch(drv->type) {
++ case WL_HERMES_1:
++ ltv.u.u16[0] = 2;
++ break;
++
++ case WL_HERMES_2:
++ case WL_HERMES_25:
++ ltv.u.u16[0] = 4;
++ break;
++
++ default:
++ ltv.u.u16[0] = 0;
++ break;
++ }
++
++ return _put_info(priv, <v);
++}
++
++
++static int wpa_driver_hermes_set_wpa(void *priv, int enabled)
++{
++ ltv_t ltv;
++
++ wpa_printf(MSG_DEBUG, "%s: enabled=%d", __func__, enabled);
++
++ ltv.len = 2;
++ ltv.typ = CFG_CNF_ENCRYPTION;
++ ltv.u.u16[0] = enabled ? 2 : 0; /* Setting CFG_CNF_ENCRYPTION to 2 sets WPA: TKIP or better */
++
++ return _put_info(priv, <v);
++}
++
++
++static int wpa_driver_hermes_set_key(void *priv, wpa_alg alg,
++ const u8 *addr, int key_idx,
++ int set_tx, const u8 *seq, size_t seq_len,
++ const u8 *key, size_t key_len)
++{
++ struct wpa_driver_hermes_data *drv = priv;
++ int ret = 0;
++ char *alg_name;
++ ltv_t ltv;
++ int count = 0;
++ int buf_idx = 0;
++ hcf_8 tsc[] = { 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00 };
++ hcf_8 rsc[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
++
++
++ switch (alg) {
++ case WPA_ALG_NONE:
++ alg_name = "none";
++ break;
++ case WPA_ALG_WEP:
++ alg_name = "WEP";
++ break;
++ case WPA_ALG_TKIP:
++ alg_name = "TKIP";
++ break;
++ case WPA_ALG_CCMP:
++ alg_name = "CCMP";
++ break;
++ default:
++ return -1;
++ }
++
++ wpa_printf(MSG_DEBUG, "%s: alg=%s key_idx=%d set_tx=%d seq_len=%d "
++ "key_len=%d", __FUNCTION__, alg_name, key_idx, set_tx,
++ seq_len, key_len);
++
++ if (seq_len > IW_ENCODE_SEQ_MAX_SIZE) {
++ wpa_printf(MSG_DEBUG, "%s: Invalid seq_len %lu", __FUNCTION__, (unsigned long) seq_len);
++ return -2;
++ }
++
++ /* Check the key index here; if 0, load as Pairwise Key, otherwise, load as
++ a group key. Note that for the Hermes, the RIDs for group/pairwise keys
++ are different from each other and different than the default WEP keys as
++ well. */
++ switch (alg) {
++ case WPA_ALG_TKIP:
++ /* Make sure that there is no data queued up in the firmware before
++ setting the TKIP keys. If this check is not performed, some data
++ may be sent out with incorrect MIC and cause synchronizarion
++ errors with the AP */
++ /* Check every 1ms for 100ms */
++ for (count = 0; count < 100; count++) {
++ usleep(1000);
++
++ ltv.len = 2;
++ ltv.typ = 0xFD91; // This RID not defined in HCF yet!!!
++ ltv.u.u16[0] = 0;
++
++ _get_info( priv, <v);
++
++ if (ltv.u.u16[0] == 0)
++ break;
++ }
++
++ if (count == 100)
++ wpa_printf(MSG_DEBUG, "%s: Timed out waiting for TxQ!", __FUNCTION__);
++
++
++ switch (key_idx) {
++ case 0:
++ /* Only load key as pairwise key for Hermes-II and II.5. For Hermes-I,
++ fall through to the next case and load the pairwise key as
++ a Group Key at index 0. */
++ if (drv->type == WL_HERMES_2 || drv->type == WL_HERMES_25) {
++ ltv.len = 28;
++ ltv.typ = CFG_ADD_TKIP_MAPPED_KEY;
++
++ /* Load the BSSID */
++ memcpy(<v.u.u8[buf_idx], addr, ETH_ALEN);
++ buf_idx += ETH_ALEN;
++
++ /* Load the TKIP key */
++ memcpy(<v.u.u8[buf_idx], &key[0], 16);
++ buf_idx += 16;
++
++ /* Load the TSC */
++ memcpy(<v.u.u8[buf_idx], tsc, 8);
++ buf_idx += 8;
++
++ /* Load the RSC */
++ /* Copy the RSC from the supplicant to a local buffer, because
++ the RSC doesn't always contain the padding needed */
++ memcpy(rsc, seq, seq_len);
++ memcpy(<v.u.u8[buf_idx], rsc, 8);
++ buf_idx += 8;
++
++ /* Load the TxMIC key */
++ memcpy(<v.u.u8[buf_idx], &key[16], 8);
++ buf_idx += 8;
++
++ /* Load the RxMIC key */
++ memcpy(<v.u.u8[buf_idx], &key[24], 8);
++
++ /* Send the request to the Hermes */
++ _put_info(priv, <v);
++ break;
++ }
++
++ case 1:
++ case 2:
++ case 3:
++ ltv.len = 26;
++ ltv.typ = CFG_ADD_TKIP_DEFAULT_KEY;
++
++ /* Load the key Index */
++ ltv.u.u16[buf_idx] = key_idx;
++
++ /* If this is a Tx Key, set bit 8000 */
++ if (set_tx)
++ ltv.u.u16[buf_idx] |= 0x8000;
++
++ buf_idx += 2;
++
++ /* Load the RSC */
++ /* Copy the RSC from the supplicant to a local buffer, because
++ the RSC doesn't always contain the padding needed */
++ memcpy(rsc, seq, seq_len);
++ memcpy(<v.u.u8[buf_idx], rsc, 8);
++ buf_idx += 8;
++
++ /* Load the TKIP, TxMIC, and RxMIC keys in one shot, because in
++ CFG_ADD_TKIP_DEFAULT_KEY they are back-to-back */
++ memcpy(<v.u.u8[buf_idx], key, key_len);
++ buf_idx += key_len;
++
++ /* Load the TSC */
++ memcpy(<v.u.u8[buf_idx], tsc, 8);
++
++ /* Send the request to the Hermes */
++ _put_info(priv, <v);
++ break;
++
++ default:
++ break;
++ }
++
++ break;
++
++ case WPA_ALG_WEP:
++ case WPA_ALG_CCMP:
++ break;
++
++ case WPA_ALG_NONE:
++ switch (key_idx) {
++ case 0:
++ if (drv->type == WL_HERMES_2 || drv->type == WL_HERMES_25) {
++ /* Only clear a pairwise key for Hermes-II. For Hermes-I,
++ fall through to the next case and clear the key as a
++ Group Key at index 0. */
++ if (addr) {
++ ltv.len = 7;
++ ltv.typ = CFG_REMOVE_TKIP_MAPPED_KEY;
++
++ memcpy(<v.u.u8[0], addr, ETH_ALEN);
++
++ _put_info(priv, <v);
++ }
++ break;
++ }
++
++ case 1:
++ case 2:
++ case 3:
++ /* Clear the Group TKIP keys by index */
++ ltv.len = 2;
++ ltv.typ = CFG_REMOVE_TKIP_DEFAULT_KEY;
++
++ ltv.u.u16[0] = key_idx;
++
++ _put_info(priv, <v);
++ break;
++
++ default:
++ break;
++ }
++ break;
++
++ default:
++ break;
++ }
++
++ return ret;
++}
++
++
++static int wpa_driver_hermes_set_countermeasures(void *priv, int enabled)
++{
++ ltv_t ltv;
++
++ /* The supplicant handles all the timers related to MIC failure and
++ countermeasures. When countermeasures are enabled, shut down the card;
++ when disable, re-enable the card. Make sure that the EAPOL message
++ is getting out before card disable */
++
++ wpa_printf(MSG_DEBUG, "%s: enabled=%d", __FUNCTION__, enabled);
++
++ ltv.len = 2;
++ ltv.typ = CFG_DRIVER_ENABLE;
++ ltv.u.u16[0] = enabled ? 0 : 1;
++
++ return _put_info(priv, <v);
++}
++
++
++static int wpa_driver_hermes_set_drop_unencrypted(void *priv, int enabled)
++{
++ ltv_t ltv;
++
++ wpa_printf(MSG_DEBUG, "%s: enabled=%d", __FUNCTION__, enabled);
++
++ ltv.len = 2;
++ ltv.typ = CFG_CNF_EXCL_UNENCRYPTED;
++ ltv.u.u16[0] = enabled;
++
++ return _put_info(priv, <v);
++}
++
++
++static int wpa_driver_hermes_deauthenticate(void *priv, const u8 *addr,
++ int reason_code)
++{
++ wpa_printf(MSG_DEBUG, "%s: *DUMMY* %d", __FUNCTION__, reason_code);
++
++ return 0;
++}
++
++
++static int wpa_driver_hermes_disassociate(void *priv, const u8 *addr, int reason_code)
++{
++ ltv_t ltv;
++
++ wpa_printf(MSG_DEBUG, "%s: reason=%d", __FUNCTION__, reason_code);
++
++ ltv.len = 2;
++ ltv.typ = 0xFCC8; // This RID not defined in HCF yet!!!
++ memcpy( <v.u.u8[0], addr, ETH_ALEN );
++ ltv.u.u16[ETH_ALEN / 2] = reason_code;
++
++ return _put_info( priv, <v);
++}
++
++
++static int wpa_driver_hermes_associate(
++ void *priv, struct wpa_driver_associate_params *params)
++{
++ struct wpa_driver_hermes_data *drv = priv;
++
++#if 0
++ wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);
++#else
++ wpa_printf(MSG_DEBUG, "%s: priv=%p freq=%d pairwise_suite=%d "
++ "group_suite=%d key_mgmt_suite=%d auth_alg=%d mode=%d",
++ __func__, priv, params->freq, params->pairwise_suite,
++ params->group_suite, params->key_mgmt_suite,
++ params->auth_alg, params->mode);
++ if (params->bssid) {
++ wpa_printf(MSG_DEBUG, " bssid=" MACSTR,
++ MAC2STR(params->bssid));
++ }
++ if (params->ssid) {
++ wpa_hexdump_ascii(MSG_DEBUG, " ssid",
++ params->ssid, params->ssid_len);
++ }
++ if (params->wpa_ie) {
++ wpa_hexdump(MSG_DEBUG, " wpa_ie",
++ params->wpa_ie, params->wpa_ie_len);
++ }
++#endif
++
++ if (wpa_driver_hermes_set_wpa_ie(priv, params->wpa_ie, params->wpa_ie_len) < 0)
++ return -1;
++ if (wpa_driver_wext_set_freq(drv->wext, params->freq) < 0)
++ return -1;
++ if (wpa_driver_wext_set_ssid(drv->wext, params->ssid, params->ssid_len) < 0)
++ return -1;
++#ifdef UNSUPPORTED_IN_HERMES_DRIVER
++ if (wpa_driver_wext_hermes_bssid(drv->wext, params->bssid) < 0)
++ return -1;
++#endif
++
++ return 0;
++}
++
++
++static int wpa_driver_hermes_get_bssid(void *priv, u8 *bssid)
++{
++ struct wpa_driver_hermes_data *drv = priv;
++ return wpa_driver_wext_get_bssid(drv->wext, bssid);
++}
++
++
++static int wpa_driver_hermes_get_ssid(void *priv, u8 *ssid)
++{
++ struct wpa_driver_hermes_data *drv = priv;
++ return wpa_driver_wext_get_ssid(drv->wext, ssid);
++}
++
++
++static int wpa_driver_hermes_scan(void *priv, const u8 *ssid, size_t ssid_len)
++{
++ struct wpa_driver_hermes_data *drv = priv;
++ return wpa_driver_wext_scan(drv->wext, ssid, ssid_len);
++}
++
++
++static int wpa_driver_hermes_get_scan_results(void *priv,
++ struct wpa_scan_result *results,
++ size_t max_size)
++{
++ struct wpa_driver_hermes_data *drv = priv;
++ return wpa_driver_wext_get_scan_results(drv->wext, results, max_size);
++}
++
++
++static void * wpa_driver_hermes_init(void *ctx, const char *ifname)
++{
++ struct wpa_driver_hermes_data *drv;
++
++ wpa_printf(MSG_DEBUG, "%s: %s", __FUNCTION__, ifname);
++
++ drv = malloc(sizeof(*drv));
++ if (drv == NULL)
++ return NULL;
++ memset(drv, 0, sizeof(*drv));
++
++ /* Initialize wireless context */
++ drv->wext = wpa_driver_wext_init(ctx, ifname);
++ if (drv->wext == NULL) {
++ perror("no wext context");
++ goto no_wext;
++ }
++
++ drv->ctx = ctx;
++ strncpy(drv->ifname, ifname, sizeof(drv->ifname));
++
++ drv->sock = socket(PF_INET, SOCK_DGRAM, 0);
++ if (drv->sock < 0) {
++ perror("socket(PF_INET,SOCK_DGRAM)");
++ goto no_sock;
++ }
++
++ _detect_hermes_type(drv);
++
++ return drv;
++
++no_sock:
++ wpa_driver_wext_deinit(drv->wext);
++no_wext:
++ free(drv);
++ return NULL;
++}
++
++
++static void wpa_driver_hermes_deinit(void *priv)
++{
++ struct wpa_driver_hermes_data *drv = priv;
++ wpa_driver_wext_deinit(drv->wext);
++ close(drv->sock);
++ free(drv);
++}
++
++
++
++
++struct wpa_driver_ops wpa_driver_hermes_ops = {
++ .name = "hermes",
++ .desc = "wpa_supplicant hermes driver",
++
++ .init = wpa_driver_hermes_init,
++ .deinit = wpa_driver_hermes_deinit,
++
++ // from old driver_hermes.c:
++ .get_bssid = wpa_driver_hermes_get_bssid,
++ .get_ssid = wpa_driver_hermes_get_ssid,
++ .set_wpa = wpa_driver_hermes_set_wpa,
++ .set_key = wpa_driver_hermes_set_key,
++ //.events_init = wpa_driver_wext_events_init,
++ //.events_deinit = wpa_driver_wext_events_deinit,
++ .set_countermeasures = wpa_driver_hermes_set_countermeasures,
++ .set_drop_unencrypted = wpa_driver_hermes_set_drop_unencrypted,
++ .scan = wpa_driver_hermes_scan,
++ .get_scan_results = wpa_driver_hermes_get_scan_results,
++ .deauthenticate = wpa_driver_hermes_deauthenticate,
++ .disassociate = wpa_driver_hermes_disassociate,
++ .associate = wpa_driver_hermes_associate,
++
++
++#if 0
++ /* Not possible with current Hermes driver:
++ .set_auth_alg = wpa_driver_hermes_set_auth_alg, */
++#endif
++};
+--- /dev/null
++++ wpa_supplicant-0.4.7/driver_hermes.h
+@@ -0,0 +1,173 @@
++#ifndef HERMES_DRIVER_H
++#define HERMES_DRIVER_H
++
++typedef unsigned char hcf_8;
++typedef unsigned short hcf_16;
++typedef unsigned long hcf_32;
++typedef hcf_16 hcf_io;
++typedef hcf_8 *wci_bufp;
++
++typedef struct {
++ hcf_16 len;
++ hcf_16 typ;
++ unsigned short * bufp;
++} RID_LOG_STRCT;
++typedef RID_LOG_STRCT *RID_LOGP;
++
++typedef struct {
++ hcf_16 len;
++ hcf_16 typ;
++ hcf_16 comp_id;
++ hcf_16 variant;
++ hcf_16 version_major;
++ hcf_16 version_minor;
++} CFG_FW_IDENTITY_STRCT;
++
++typedef struct {
++ hcf_32 TxUnicastFrames;
++ hcf_32 TxMulticastFrames;
++ hcf_32 TxFragments;
++ hcf_32 TxUnicastOctets;
++ hcf_32 TxMulticastOctets;
++ hcf_32 TxDeferredTransmissions;
++ hcf_32 TxSingleRetryFrames;
++ hcf_32 TxMultipleRetryFrames;
++ hcf_32 TxRetryLimitExceeded;
++ hcf_32 TxDiscards;
++ hcf_32 RxUnicastFrames;
++ hcf_32 RxMulticastFrames;
++ hcf_32 RxFragments;
++ hcf_32 RxUnicastOctets;
++ hcf_32 RxMulticastOctets;
++ hcf_32 RxFCSErrors;
++ hcf_32 RxDiscardsNoBuffer;
++ hcf_32 TxDiscardsWrongSA;
++ hcf_32 RxWEPUndecryptable;
++ hcf_32 RxMsgInMsgFragments;
++ hcf_32 RxMsgInBadMsgFragments;
++ hcf_32 RxDiscardsWEPICVError;
++ hcf_32 RxDiscardsWEPExcluded;
++} CFG_HERMES_TALLIES_STRCT;
++
++typedef struct {
++ hcf_32 not_used_NoBufInq;
++ hcf_32 NoBufInfo;
++ hcf_32 NoBufMB;
++ hcf_32 MiscErr;
++ hcf_32 EngCnt;
++} CFG_HCF_TALLIES_STRCT;
++
++typedef struct {
++ hcf_io IFB_IOBase;
++ hcf_16 IFB_IORange;
++
++ hcf_32 IFB_TickIni;
++
++ hcf_16 IFB_Version;
++ hcf_16 IFB_CardStat;
++ hcf_16 IFB_TraceLvl;
++ hcf_16 *IFB_MBp;
++ hcf_16 IFB_MBSize;
++ hcf_16 IFB_MBWp;
++ hcf_16 IFB_MBRp;
++ hcf_16 IFB_MBInfoLen;
++
++ hcf_16 IFB_DLMode;
++ hcf_16 IFB_Magic;
++ hcf_16 IFB_Cmd;
++ hcf_16 IFB_RxFID;
++ RID_LOGP IFB_RIDLogp;
++ hcf_16 IFB_Monitor;
++ hcf_16 IFB_TxFid;
++ hcf_16 IFB_RxLen;
++ hcf_16 IFB_DefunctStat;
++
++ hcf_16 IFB_ErrCmd;
++ hcf_16 IFB_ErrQualifier;
++ hcf_16 IFB_lal;
++ wci_bufp IFB_lap;
++ hcf_16 IFB_LinkStat;
++
++ void (*IFB_MICRxRtn)( hcf_32*, hcf_32 );
++ void (*IFB_MICTxRtn)( hcf_32*, hcf_32 );
++ hcf_16 IFB_rx_tlen;
++ hcf_16 IFB_tx_tlen;
++ hcf_8 IFB_rx_32[4];
++ hcf_8 IFB_tx_32[4];
++ hcf_16 IFB_RscInd;
++ hcf_16 IFB_MB_FID;
++ hcf_16 IFB_DLTarget[2];
++
++ hcf_16 IFB_DLPage;
++ hcf_16 IFB_DLOffset;
++ hcf_16 IFB_DLLen;
++
++ hcf_16 volatile IFB_IntOffCnt;
++ hcf_16 IFB_IntEnMask;
++
++ CFG_FW_IDENTITY_STRCT IFB_FWIdentity;
++ hcf_16 IFB_Tally;
++ hcf_16 IFB_TallyTyp;
++
++ CFG_HERMES_TALLIES_STRCT IFB_NIC_Tallies;
++ CFG_HCF_TALLIES_STRCT IFB_HCF_Tallies;
++
++ void *IFB_MSFSup;
++} IFB_STRCT;
++
++typedef IFB_STRCT* IFBP;
++
++struct uilreq
++{
++ union
++ {
++ char ifrn_name[16];
++ } ifr_ifrn;
++
++ IFBP hcfCtx;
++ __u8 command;
++ __u8 result;
++ __u16 len;
++ void *data;
++};
++
++typedef struct
++{
++ hcf_16 len;
++ hcf_16 typ;
++ union
++ {
++ hcf_8 u8[(512 - (sizeof(hcf_16) * 2)) / sizeof(hcf_8)];
++ hcf_16 u16[(512 - (sizeof(hcf_16) * 2)) / sizeof(hcf_16)];
++ hcf_32 u32[(512 - (sizeof(hcf_16) * 2)) / sizeof(hcf_32)];
++ } u;
++} ltv_t;
++
++
++#define UIL_FUN_CONNECT 0x00
++#define UIL_FUN_DISCONNECT 0x01
++#define UIL_FUN_GET_INFO 0x04
++#define UIL_FUN_PUT_INFO 0x05
++
++#define GENERIC_INFO_ELEM 0xdd
++#define RSN_INFO_ELEM 0x30
++
++#define CFG_DRIVER_ENABLE 0x0902
++#define CFG_CNF_ENCRYPTION 0xFC20
++#define CFG_ADD_TKIP_DEFAULT_KEY 0xFCB4
++#define CFG_SET_WPA_AUTH_KEY_MGMT_SUITE 0xFCB5
++#define CFG_REMOVE_TKIP_DEFAULT_KEY 0xFCB6
++#define CFG_ADD_TKIP_MAPPED_KEY 0xFCB7
++#define CFG_REMOVE_TKIP_MAPPED_KEY 0xFCB8
++#define CFG_FW_IDENTITY 0xFD20
++#define CFG_CNF_EXCL_UNENCRYPTED 0xFC22
++
++#define HCF_SUCCESS 0x00
++#define UIL_SUCCESS 0x00
++
++#define COMP_ID_FW_STA 31
++#define COMP_ID_FW_AP 32
++
++#define WVLAN2_IOCTL_UIL SIOCDEVPRIVATE
++
++#endif
--- /dev/null
+diff -Nur wpa_supplicant-0.4.7/defconfig wpa_supplicant-0.4.7.new/defconfig
+--- wpa_supplicant-0.4.7/defconfig 2005-09-24 20:30:43.000000000 +0200
++++ wpa_supplicant-0.4.7.new/defconfig 2005-12-26 19:18:14.000000000 +0100
+@@ -68,6 +68,9 @@
+ # Driver interface for Intel ipw2100/2200 driver
+ #CONFIG_DRIVER_IPW=y
+
++# Driver interface for Zydas zd1211 driver
++#CONFIG_DRIVER_ZD1211=y
++
+ # Driver interface for generic Linux wireless extensions
+ CONFIG_DRIVER_WEXT=y
+
+diff -Nur wpa_supplicant-0.4.7/drivers.c wpa_supplicant-0.4.7.new/drivers.c
+--- wpa_supplicant-0.4.7/drivers.c 2005-02-20 01:15:54.000000000 +0100
++++ wpa_supplicant-0.4.7.new/drivers.c 2005-12-26 19:19:16.000000000 +0100
+@@ -55,6 +55,9 @@
+ #ifdef CONFIG_DRIVER_TEST
+ extern struct wpa_driver_ops wpa_driver_test_ops; /* driver_test.c */
+ #endif /* CONFIG_DRIVER_TEST */
++#ifdef CONFIG_DRIVER_ZD1211
++extern struct wpa_driver_ops wpa_driver_zd1211_ops; /* driver_zd1211.c */
++#endif /* CONFIG_DRIVER_ZD1211 */
+
+
+ struct wpa_driver_ops *wpa_supplicant_drivers[] =
+@@ -98,5 +101,8 @@
+ #ifdef CONFIG_DRIVER_TEST
+ &wpa_driver_test_ops,
+ #endif /* CONFIG_DRIVER_TEST */
++#ifdef CONFIG_DRIVER_ZD1211
++ &wpa_driver_zd1211_ops,
++#endif /* CONFIG_DRIVER_ZD1211 */
+ NULL
+ };
+diff -Nur wpa_supplicant-0.4.7/driver_zd1211.c wpa_supplicant-0.4.7.new/driver_zd1211.c
+--- wpa_supplicant-0.4.7/driver_zd1211.c 1970-01-01 01:00:00.000000000 +0100
++++ wpa_supplicant-0.4.7.new/driver_zd1211.c 2005-12-27 16:28:46.000000000 +0100
+@@ -0,0 +1,408 @@
++#include <stdlib.h>
++#include <stdio.h>
++#include <unistd.h>
++#include <string.h>
++#include <sys/ioctl.h>
++#include <errno.h>
++
++#include "common.h"
++#include "driver.h"
++#include "driver_wext.h"
++#include "eloop.h"
++#include "wireless_copy.h"
++#include "wpa_supplicant.h"
++
++#include "zd1211_common.h"
++
++
++struct wpa_driver_zd1211_data {
++ void *ctx;
++ void *wext; /* private data for driver_wext */
++ char ifname[IFNAMSIZ + 1];
++ int sock;
++};
++
++
++static int zd1211_ioctl(struct wpa_driver_zd1211_data *zd1211_drv, struct zd1211_wlan_param *param, int len, int show_err) {
++ struct iwreq iwr;
++
++ memset(&iwr, 0, sizeof(iwr));
++ strncpy(iwr.ifr_name, zd1211_drv->ifname, IFNAMSIZ);
++ iwr.u.data.pointer = (caddr_t) param;
++ iwr.u.data.length = len;
++
++ if (ioctl(zd1211_drv->sock, ZD_IOCTL_WPA, &iwr) < 0) {
++ int ret;
++
++ ret = errno;
++ if (show_err)
++ perror("ioctl[ZD_IOCTL_WPA]");
++ return ret;
++ }
++
++ return 0;
++}
++
++
++static int zd1211_set_param(struct wpa_driver_zd1211_data *zd1211_drv, int op, int arg, int show_err) {
++ struct iwreq iwr;
++ int *i, ret = 0;
++
++ memset(&iwr, 0, sizeof(iwr));
++ strncpy(iwr.ifr_name, zd1211_drv->ifname, IFNAMSIZ);
++ i = (int *) iwr.u.name;
++ *i++ = op;
++ *i++ = arg;
++
++ if (ioctl(zd1211_drv->sock, ZD_IOCTL_PARAM, &iwr) < 0) {
++ perror("ioctl[ZD_IOCTL_PARAM]");
++ ret = -1;
++ }
++
++ return ret;
++}
++
++
++static int wpa_driver_zd1211_get_scan_results(void *priv, struct wpa_scan_result *results, size_t max_size) {
++ struct wpa_driver_zd1211_data *zd1211_drv;
++
++ zd1211_drv = priv;
++ return wpa_driver_wext_get_scan_results(zd1211_drv->wext, results, max_size);
++}
++
++
++static int wpa_driver_zd1211_get_bssid(void *priv, u8 *bssid) {
++ struct wpa_driver_zd1211_data *zd1211_drv;
++
++ zd1211_drv = priv;
++ return wpa_driver_wext_get_bssid(zd1211_drv->wext, bssid);
++}
++
++
++static int wpa_driver_zd1211_get_ssid(void *priv, u8 *ssid) {
++ struct wpa_driver_zd1211_data *zd1211_drv;
++
++ zd1211_drv = priv;
++ return wpa_driver_wext_get_ssid(zd1211_drv->wext, ssid);
++}
++
++
++static int wpa_driver_zd1211_set_auth_alg(void *priv, int auth_alg) {
++ struct wpa_driver_zd1211_data *zd1211_drv = priv;
++ int algs = 0;
++
++ if (auth_alg & AUTH_ALG_OPEN_SYSTEM)
++ algs = 0;
++ if (auth_alg & AUTH_ALG_SHARED_KEY)
++ algs = 1;
++
++ return zd1211_set_param(zd1211_drv, ZD_PARAM_AUTH_ALGS, algs, 1);
++}
++
++
++static int wpa_driver_zd1211_set_countermeasures(void *priv, int enabled) {
++ struct wpa_driver_zd1211_data *zd1211_drv = priv;
++
++ /* Enable the countermeasure */
++ wpa_printf(MSG_DEBUG, "%s: enabled=%d", __FUNCTION__, enabled);
++ return zd1211_set_param(zd1211_drv, ZD_PARAM_COUNTERMEASURES, enabled, 1);
++}
++
++
++static int wpa_driver_zd1211_set_drop_unencrypted(void *priv, int enabled) {
++ struct wpa_driver_zd1211_data *zd1211_drv = priv;
++
++ /* Enable the countermeasure */
++ wpa_printf(MSG_DEBUG, "%s: enabled=%d", __FUNCTION__, enabled);
++ return zd1211_set_param(zd1211_drv, ZD_PARAM_DROPUNENCRYPTED, enabled, 1);
++}
++
++
++static int wpa_driver_zd1211_set_key(void *priv, wpa_alg alg,
++ const u8 *addr, int key_idx,
++ int set_tx, const u8 *seq, size_t seq_len,
++ const u8 *key, size_t key_len) {
++ struct wpa_driver_zd1211_data *zd1211_drv = priv;
++ struct zd1211_wlan_param *param;
++ u8 *buf;
++ size_t blen;
++ int ret = 0;
++ char *alg_name;
++
++ switch (alg) {
++ case WPA_ALG_NONE:
++ alg_name = "NONE";
++ break;
++ case WPA_ALG_WEP:
++ alg_name = "WEP";
++ break;
++ case WPA_ALG_TKIP:
++ alg_name = "TKIP";
++ break;
++ case WPA_ALG_CCMP:
++ alg_name = "CCMP";
++ break;
++ default:
++ return -1;
++ }
++
++ wpa_printf(MSG_DEBUG, "%s: alg=%s key_idx=%d set_tx=%d seq_len=%d "
++ "key_len=%d", __FUNCTION__, alg_name, key_idx, set_tx,
++ seq_len, key_len);
++
++ if (seq_len > 8)
++ return -2;
++
++ blen = sizeof(*param) + key_len;
++ buf = malloc(blen);
++ if (buf == NULL)
++ return -1;
++ memset(buf, 0, blen);
++
++ param = (struct zd1211_wlan_param *) buf;
++ param->cmd = ZD_CMD_SET_ENCRYPT_KEY;
++ /* TODO: In theory, STA in client mode can use five keys; four default
++ * keys for receiving (with keyidx 0..3) and one individual key for
++ * both transmitting and receiving (keyidx 0) _unicast_ packets. Now,
++ * keyidx 0 is reserved for this unicast use and default keys can only
++ * use keyidx 1..3 (i.e., default key with keyidx 0 is not supported).
++ * This should be fine for more or less all cases, but for completeness
++ * sake, the driver could be enhanced to support the missing key. */
++#if 0
++ if (addr == NULL)
++ memset(param->sta_addr, 0xff, ETH_ALEN);
++ else
++ memcpy(param->sta_addr, addr, ETH_ALEN);
++#else
++ memset(param->sta_addr, 0xff, ETH_ALEN);
++#endif
++ strncpy(param->u.crypt.alg, alg_name, ZD_CRYPT_ALG_NAME_LEN);
++ param->u.crypt.flags = set_tx ? ZD_FLAG_SET_TX_KEY : 0;
++ param->u.crypt.idx = key_idx;
++ memcpy(param->u.crypt.seq, seq, seq_len);
++ param->u.crypt.key_len = key_len;
++ memcpy((u8 *) param->u.crypt.key, key, key_len);
++
++ /* Dump key context */
++ if(alg == WPA_ALG_TKIP) {
++ int ii;
++
++ wpa_printf(MSG_DEBUG, "Key Context:");
++ for(ii = 0; ii < key_len; ) {
++ printf("0x%02x ", key[ii]);
++
++ if((++ii % 16) == 0)
++ printf("\n");
++ }
++
++ printf("\n");
++ }
++
++ if (zd1211_ioctl(zd1211_drv, param, blen, 1)) {
++ wpa_printf(MSG_WARNING, "Failed to set encryption.");
++ //show_set_key_error(param);
++ ret = -1;
++ }
++ free(buf);
++
++ return ret;
++}
++
++
++static int wpa_driver_zd1211_set_wpa_ie(struct wpa_driver_zd1211_data *zd1211_drv, const u8 *wpa_ie, size_t wpa_ie_len) {
++ int res;
++ struct zd1211_wlan_param *param;
++ size_t blen = ZD_GENERIC_ELEMENT_HDR_LEN + wpa_ie_len;
++
++ if (blen < sizeof(*param))
++ blen = sizeof(*param);
++
++ param = (struct zd1211_wlan_param *) malloc(blen);
++ if (param == NULL)
++ return -1;
++
++ memset(param, 0, blen);
++ param->cmd = ZD_CMD_SET_GENERIC_ELEMENT;
++ param->u.generic_elem.len = wpa_ie_len;
++ memcpy(param->u.generic_elem.data, wpa_ie, wpa_ie_len);
++ res = zd1211_ioctl(zd1211_drv, param, blen, 1);
++
++ free(param);
++
++ return res;
++}
++
++
++static int wpa_driver_zd1211_set_wpa(void *priv, int enabled) {
++ struct wpa_driver_zd1211_data *zd1211_drv = priv;
++ int ret = 0;
++
++ wpa_printf(MSG_DEBUG, "%s: enabled=%d", __FUNCTION__, enabled);
++
++ if (!enabled && wpa_driver_zd1211_set_wpa_ie(zd1211_drv, NULL, 0) < 0)
++ ret = -1;
++ if (zd1211_set_param(zd1211_drv, ZD_PARAM_ROAMING, enabled, 1) < 0)
++ ret = -1;
++ if (zd1211_set_param(zd1211_drv, ZD_PARAM_PRIVACY, enabled, 1) < 0)
++ ret = -1;
++ if (zd1211_set_param(zd1211_drv, ZD_PARAM_WPA, enabled, 1) < 0)
++ ret = -1;
++
++ return ret;
++}
++
++
++static int wpa_driver_zd1211_associate(void *priv, struct wpa_driver_associate_params *params) {
++ struct wpa_driver_zd1211_data *zd1211_drv = priv;
++ int ret = 0;
++
++ wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);
++
++ /* Because there might be the case, two or more APs with the same
++ * SSID, in order to identify them, we need to set the BSSID. */
++ if (wpa_driver_zd1211_set_wpa_ie(zd1211_drv, params->wpa_ie, params->wpa_ie_len) < 0)
++ ret = -1;
++ if (wpa_driver_wext_set_ssid(zd1211_drv->wext, params->ssid, params->ssid_len) < 0)
++ ret = -1;
++
++ // Mark for test
++ //if (wpa_driver_wext_set_bssid(ifname, bssid) < 0)
++ // ret = -1;
++
++#if 0
++ /* Allow unencrypted EAPOL messages even if pairwise keys are set when
++ * not using WPA. IEEE 802.1X specifies that these frames are not
++ * encrypted, but WPA encrypts them when pairwise keys are in use. */
++ if (key_mgmt_suite == KEY_MGMT_802_1X ||
++ key_mgmt_suite == KEY_MGMT_PSK)
++ allow_unencrypted_eapol = 0;
++ else
++ allow_unencrypted_eapol = 1;
++
++ if (prism2param(ifname, PRISM2_PARAM_IEEE_802_1X,
++ allow_unencrypted_eapol) < 0) {
++ wpa_printf(MSG_DEBUG, "hostap: Failed to configure "
++ "ieee_802_1x param");
++ /* Ignore this error.. driver_hostap.c can also be used with
++ * other drivers that do not support this prism2_param. */
++ }
++#endif
++
++ return ret;
++}
++
++
++static int wpa_driver_zd1211_deauthenticate(void *priv, const u8 *addr, int reason_code) {
++ struct zd1211_wlan_param *param;
++ struct wpa_driver_zd1211_data *zd1211_drv = priv;
++ int blen;
++ int ret;
++
++ wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);
++
++ blen = sizeof(*param);
++ param = (struct zd1211_wlan_param *) malloc(blen);
++ if (param == NULL)
++ return -1;
++
++ memset(param, 0, blen);
++ param->cmd = ZD_CMD_SET_MLME;
++ param->u.mlme.cmd = MLME_STA_DEAUTH;
++ param->u.mlme.reason_code = reason_code;
++ memcpy(param->sta_addr, addr, ETH_ALEN);
++ ret = zd1211_ioctl(zd1211_drv, param, blen, 1);
++ usleep(100000);
++ free(param);
++ return ret;
++}
++
++
++static int wpa_driver_zd1211_disassociate(void *priv, const u8 *addr, int reason_code) {
++ struct zd1211_wlan_param *param;
++ struct wpa_driver_zd1211_data *zd1211_drv = priv;
++ int blen;
++ int ret;
++
++ wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);
++
++ blen = sizeof(*param);
++ param = (struct zd1211_wlan_param *) malloc(blen);
++ if (param == NULL)
++ return -1;
++
++ memset(param, 0, blen);
++ param->cmd = ZD_CMD_SET_MLME;
++ param->u.mlme.cmd = MLME_STA_DISASSOC;
++ param->u.mlme.reason_code = reason_code;
++ memcpy(param->sta_addr, addr, ETH_ALEN);
++ ret = zd1211_ioctl(zd1211_drv, param, blen, 1);
++ free(param);
++ return ret;
++}
++
++
++static int wpa_driver_zd1211_scan(void *priv, const u8 *ssid, size_t ssid_len) {
++ struct wpa_driver_zd1211_data *zd1211_drv;
++
++ zd1211_drv = priv;
++ return wpa_driver_wext_scan(zd1211_drv->wext, ssid, ssid_len);
++}
++
++
++static void * wpa_driver_zd1211_init(void *ctx, const char *ifname) {
++ struct wpa_driver_zd1211_data *zd1211_drv;
++
++ zd1211_drv = malloc(sizeof(*zd1211_drv));
++ if (zd1211_drv == NULL)
++ return NULL;
++ memset(zd1211_drv, 0, sizeof(*zd1211_drv));
++
++ zd1211_drv->wext = wpa_driver_wext_init(ctx, ifname);
++ if (zd1211_drv->wext == NULL)
++ goto exit_no_wext;
++
++ zd1211_drv->ctx = ctx;
++ strncpy(zd1211_drv->ifname, ifname, sizeof(zd1211_drv->ifname));
++
++ zd1211_drv->sock = socket(PF_INET, SOCK_DGRAM, 0);
++ if (zd1211_drv->sock < 0)
++ goto exit_no_socket;
++
++ return zd1211_drv;
++
++exit_no_socket:
++ wpa_driver_wext_deinit(zd1211_drv->wext);
++exit_no_wext:
++ free(zd1211_drv);
++ return NULL;
++}
++
++
++static void wpa_driver_zd1211_deinit(void *ctx) {
++ struct wpa_driver_zd1211_data *zd1211_drv = ctx;
++
++ wpa_driver_wext_deinit(zd1211_drv->wext);
++ close(zd1211_drv->sock);
++ free(zd1211_drv);
++}
++
++
++struct wpa_driver_ops wpa_driver_zd1211_ops = {
++ .name = "zd1211",
++ .desc = "Zydas zd1211 drivers",
++ .init = wpa_driver_zd1211_init,
++ .deinit = wpa_driver_zd1211_deinit,
++ .associate = wpa_driver_zd1211_associate,
++ .deauthenticate = wpa_driver_zd1211_deauthenticate,
++ .disassociate = wpa_driver_zd1211_disassociate,
++ .get_bssid = wpa_driver_zd1211_get_bssid,
++ .get_scan_results = wpa_driver_zd1211_get_scan_results,
++ .get_ssid = wpa_driver_zd1211_get_ssid,
++// .get_capa = wpa_driver_zd1211_get_capa,
++ .scan = wpa_driver_zd1211_scan,
++ .set_auth_alg = wpa_driver_zd1211_set_auth_alg,
++ .set_countermeasures = wpa_driver_zd1211_set_countermeasures,
++ .set_drop_unencrypted = wpa_driver_zd1211_set_drop_unencrypted,
++ .set_key = wpa_driver_zd1211_set_key,
++ .set_wpa = wpa_driver_zd1211_set_wpa,
++};
+diff -Nur wpa_supplicant-0.4.7/Makefile wpa_supplicant-0.4.7.new/Makefile
+--- wpa_supplicant-0.4.7/Makefile 2005-11-21 02:42:12.000000000 +0100
++++ wpa_supplicant-0.4.7.new/Makefile 2005-12-26 19:17:14.000000000 +0100
+@@ -107,6 +107,12 @@
+ CONFIG_WIRELESS_EXTENSION=y
+ endif
+
++ifdef CONFIG_DRIVER_ZD1211
++CFLAGS += -DCONFIG_DRIVER_ZD1211
++OBJS_d += driver_zd1211.o
++CONFIG_WIRELESS_EXTENSION=y
++endif
++
+ ifdef CONFIG_DRIVER_BSD
+ CFLAGS += -DCONFIG_DRIVER_BSD
+ OBJS_d += driver_bsd.o
+diff -Nur wpa_supplicant-0.4.7/zd1211_common.h wpa_supplicant-0.4.7.new/zd1211_common.h
+--- wpa_supplicant-0.4.7/zd1211_common.h 1970-01-01 01:00:00.000000000 +0100
++++ wpa_supplicant-0.4.7.new/zd1211_common.h 2005-12-27 16:00:36.000000000 +0100
+@@ -0,0 +1,68 @@
++#ifndef ZD1211_COMMON_H
++#define ZD1211_COMMON_H
++
++
++#define ZD_IOCTL_WPA (SIOCDEVPRIVATE + 1)
++#define ZD_IOCTL_PARAM (SIOCDEVPRIVATE + 2)
++
++#define ZD_PARAM_ROAMING 0x0001
++#define ZD_PARAM_PRIVACY 0x0002
++#define ZD_PARAM_WPA 0x0003
++#define ZD_PARAM_COUNTERMEASURES 0x0004
++#define ZD_PARAM_DROPUNENCRYPTED 0x0005
++#define ZD_PARAM_AUTH_ALGS 0x0006
++
++#define ZD_CMD_SET_ENCRYPT_KEY 0x0001
++#define ZD_CMD_SET_MLME 0x0002
++//#define ZD_CMD_SCAN_REQ 0x0003
++#define ZD_CMD_SET_GENERIC_ELEMENT 0x0004
++
++#define ZD_FLAG_SET_TX_KEY 0x0001
++
++#define ZD_GENERIC_ELEMENT_HDR_LEN \
++((int) (&((struct zd1211_wlan_param *) 0)->u.generic_elem.data))
++
++#define ZD_CRYPT_ALG_NAME_LEN 16
++#define ZD_MAX_KEY_SIZE 32
++#define ZD_MAX_GENERIC_SIZE 64
++
++/* structure definition */
++
++struct zd1211_wlan_param {
++ u32 cmd;
++ u8 sta_addr[ETH_ALEN];
++ union {
++ struct {
++ u8 alg[ZD_CRYPT_ALG_NAME_LEN];
++ u32 flags;
++ u32 err;
++ u8 idx;
++ u8 seq[8]; /* sequence counter (set: RX, get: TX) */
++ u16 key_len;
++ u8 key[ZD_MAX_KEY_SIZE];
++ } crypt;
++/*
++ struct {
++ u32 flags_and;
++ u32 flags_or;
++ } set_flags_sta;
++*/
++ struct {
++ u8 len;
++ u8 data[ZD_MAX_GENERIC_SIZE];
++ } generic_elem;
++ struct {
++#define MLME_STA_DEAUTH 0
++#define MLME_STA_DISASSOC 1
++ u16 cmd;
++ u16 reason_code;
++ } mlme;
++ struct {
++ u8 ssid_len;
++ u8 ssid[32];
++ } scan_req;
++ } u;
++};
++
++
++#endif
--- /dev/null
+--- driver_madwifi.c.orig 2005-03-18 15:12:53.392793216 +0100
++++ driver_madwifi.c 2005-03-18 15:13:09.246383104 +0100
+@@ -25,7 +25,8 @@
+ #include "eloop.h"
+ #include "wpa_supplicant.h"
+
+-#include <include/compat.h>
++#include <net80211/compat.h>
++#include <net80211/_ieee80211.h>
+ #include <net80211/ieee80211.h>
+ #include <net80211/ieee80211_crypto.h>
+ #include <net80211/ieee80211_ioctl.h>
--- /dev/null
+##### Example wpa_supplicant configuration file ###############################
+# Empty lines and lines starting with # are ignored
+
+# NOTE! This file may contain password information and should probably be made
+# readable only by root user on multiuser systems.
+
+# global configuration (shared by all network blocks)
+#
+# Interface for separate control program. If this is specified, wpa_supplicant
+# will create this directory and a UNIX domain socket for listening to requests
+# from external programs (CLI/GUI, etc.) for status information and
+# configuration. The socket file will be named based on the interface name, so
+# multiple wpa_supplicant processes can be run at the same time if more than
+# one interface is used.
+# /var/run/wpa_supplicant is the recommended directory for sockets and by
+# default, wpa_cli will use it when trying to connect with wpa_supplicant.
+ctrl_interface=/var/run/wpa_supplicant
+
+# Access control for the control interface can be configured by setting the
+# directory to allow only members of a group to use sockets. This way, it is
+# possible to run wpa_supplicant as root (since it needs to change network
+# configuration and open raw sockets) and still allow GUI/CLI components to be
+# run as non-root users. However, since the control interface can be used to
+# change the network configuration, this access needs to be protected in many
+# cases. By default, wpa_supplicant is configured to use gid 0 (root). If you
+# want to allow non-root users to use the control interface, add a new group
+# and change this value to match with that group. Add users that should have
+# control interface access to this group. If this variable is commented out or
+# not included in the configuration file, group will not be changed from the
+# value it got by default when the directory or socket was created.
+#
+# This variable can be a group name or gid.
+#ctrl_interface_group=wheel
+ctrl_interface_group=0
+
+# IEEE 802.1X/EAPOL version
+# wpa_supplicant was implemented based on IEEE 802-1X-REV-d8 which defines
+# EAPOL version 2. However, there are many APs that do not handle the new
+# version number correctly (they seem to drop the frames completely). In order
+# to make wpa_supplicant interoperate with these APs, the version number is set
+# to 1 by default. This configuration value can be used to set it to the new
+# version (2).
+eapol_version=1
+
+# AP scanning/selection
+# By default, wpa_supplicant requests driver to perform AP scanning and then
+# uses the scan results to select a suitable AP. Another alternative is to
+# allow the driver to take care of AP scanning and selection and use
+# wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association
+# information from the driver.
+# 1: wpa_supplicant initiates scanning and AP selection
+# 0: driver takes care of scanning, AP selection, and IEEE 802.11 association
+# parameters (e.g., WPA IE generation); this mode can also be used with
+# non-WPA drivers when using IEEE 802.1X mode; do not try to associate with
+# APs (i.e., external program needs to control association)
+# 2: like 0, but associate with APs using security policy and SSID (but not
+# BSSID); this can be used, e.g., with ndiswrapper and NDIS driver to
+# enable operation with hidden SSIDs and optimized roaming; in this mode,
+# only the first network block in the configuration file is used and this
+# configuration should have explicit security policy (i.e., only one option
+# in the lists) for key_mgmt, pairwise, group, proto variables
+ap_scan=1
+
+# EAP fast re-authentication
+# By default, fast re-authentication is enabled for all EAP methods that
+# support it. This variable can be used to disable fast re-authentication.
+# Normally, there is no need to disable this.
+fast_reauth=1
+
+# network block
+#
+# Each network (usually AP's sharing the same SSID) is configured as a separate
+# block in this configuration file. The network blocks are in preference order
+# (the first match is used).
+#
+# network block fields:
+#
+# ssid: SSID (mandatory); either as an ASCII string with double quotation or
+# as hex string; network name
+#
+# scan_ssid:
+# 0 = do not scan this SSID with specific Probe Request frames (default)
+# 1 = scan with SSID-specific Probe Request frames (this can be used to
+# find APs that do not accept broadcast SSID or use multiple SSIDs;
+# this will add latency to scanning, so enable this only when needed)
+#
+# bssid: BSSID (optional); if set, this network block is used only when
+# associating with the AP using the configured BSSID
+#
+# priority: priority group (integer)
+# By default, all networks will get same priority group (0). If some of the
+# networks are more desirable, this field can be used to change the order in
+# which wpa_supplicant goes through the networks when selecting a BSS. The
+# priority groups will be iterated in decreasing priority (i.e., the larger the
+# priority value, the sooner the network is matched against the scan results).
+# Within each priority group, networks will be selected based on security
+# policy, signal strength, etc.
+# Please note that AP scanning with scan_ssid=1 is not using this priority to
+# select the order for scanning. Instead, it uses the order the networks are in
+# the configuration file.
+#
+# mode: IEEE 802.11 operation mode
+# 0 = infrastructure (Managed) mode, i.e., associate with an AP (default)
+# 1 = IBSS (ad-hoc, peer-to-peer)
+# Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP)
+# and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). In addition, ap_scan has
+# to be set to 2 for IBSS. WPA-None requires following network block options:
+# proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not
+# both), and psk must also be set.
+#
+# proto: list of accepted protocols
+# WPA = WPA/IEEE 802.11i/D3.0
+# RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN)
+# If not set, this defaults to: WPA RSN
+#
+# key_mgmt: list of accepted authenticated key management protocols
+# WPA-PSK = WPA pre-shared key (this requires 'psk' field)
+# WPA-EAP = WPA using EAP authentication (this can use an external
+# program, e.g., Xsupplicant, for IEEE 802.1X EAP Authentication
+# IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically
+# generated WEP keys
+# NONE = WPA is not used; plaintext or static WEP could be used
+# If not set, this defaults to: WPA-PSK WPA-EAP
+#
+# auth_alg: list of allowed IEEE 802.11 authentication algorithms
+# OPEN = Open System authentication (required for WPA/WPA2)
+# SHARED = Shared Key authentication (requires static WEP keys)
+# LEAP = LEAP/Network EAP (only used with LEAP)
+# If not set, automatic selection is used (Open System with LEAP enabled if
+# LEAP is allowed as one of the EAP methods).
+#
+# pairwise: list of accepted pairwise (unicast) ciphers for WPA
+# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
+# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
+# NONE = Use only Group Keys (deprecated, should not be included if APs support
+# pairwise keys)
+# If not set, this defaults to: CCMP TKIP
+#
+# group: list of accepted group (broadcast/multicast) ciphers for WPA
+# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
+# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
+# WEP104 = WEP (Wired Equivalent Privacy) with 104-bit key
+# WEP40 = WEP (Wired Equivalent Privacy) with 40-bit key [IEEE 802.11]
+# If not set, this defaults to: CCMP TKIP WEP104 WEP40
+#
+# psk: WPA preshared key; 256-bit pre-shared key
+# The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e.,
+# 32 bytes or as an ASCII passphrase (in which case, the real PSK will be
+# generated using the passphrase and SSID). ASCII passphrase must be between
+# 8 and 63 characters (inclusive).
+# This field is not needed, if WPA-EAP is used.
+# Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys
+# from ASCII passphrase. This process uses lot of CPU and wpa_supplicant
+# startup and reconfiguration time can be optimized by generating the PSK only
+# only when the passphrase or SSID has actually changed.
+#
+# eapol_flags: IEEE 802.1X/EAPOL options (bit field)
+# Dynamic WEP key require for non-WPA mode
+# bit0 (1): require dynamically generated unicast WEP key
+# bit1 (2): require dynamically generated broadcast WEP key
+# (3 = require both keys; default)
+#
+# Following fields are only used with internal EAP implementation.
+# eap: space-separated list of accepted EAP methods
+# MD5 = EAP-MD5 (unsecure and does not generate keying material ->
+# cannot be used with WPA; to be used as a Phase 2 method
+# with EAP-PEAP or EAP-TTLS)
+# MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used
+# as a Phase 2 method with EAP-PEAP or EAP-TTLS)
+# OTP = EAP-OTP (cannot be used separately with WPA; to be used
+# as a Phase 2 method with EAP-PEAP or EAP-TTLS)
+# GTC = EAP-GTC (cannot be used separately with WPA; to be used
+# as a Phase 2 method with EAP-PEAP or EAP-TTLS)
+# TLS = EAP-TLS (client and server certificate)
+# PEAP = EAP-PEAP (with tunnelled EAP authentication)
+# TTLS = EAP-TTLS (with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2
+# authentication)
+# If not set, all compiled in methods are allowed.
+#
+# identity: Identity string for EAP
+# anonymous_identity: Anonymous identity string for EAP (to be used as the
+# unencrypted identity with EAP types that support different tunnelled
+# identity, e.g., EAP-TTLS)
+# password: Password string for EAP
+# ca_cert: File path to CA certificate file. This file can have one or more
+# trusted CA certificates. If ca_cert is not included, server certificate
+# will not be verified. This is insecure and the CA file should always be
+# configured.
+# client_cert: File path to client certificate file (PEM/DER)
+# private_key: File path to client private key file (PEM/DER/PFX)
+# When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be
+# commented out. Both the private key and certificate will be read from
+# the PKCS#12 file in this case.
+# private_key_passwd: Password for private key file
+# dh_file: File path to DH/DSA parameters file (in PEM format)
+# This is an optional configuration file for setting parameters for an
+# ephemeral DH key exchange. In most cases, the default RSA
+# authentication does not use this configuration. However, it is possible
+# setup RSA to use ephemeral DH key exchange. In addition, ciphers with
+# DSA keys always use ephemeral DH keys. This can be used to achieve
+# forward secrecy. If the file is in DSA parameters format, it will be
+# automatically converted into DH params.
+# subject_match: Substring to be matched against the subject of the
+# authentication server certificate. If this string is set, the server
+# sertificate is only accepted if it contains this string in the subject.
+# The subject string is in following format:
+# /C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com
+# phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters
+# (string with field-value pairs, e.g., "peapver=0" or
+# "peapver=1 peaplabel=1")
+# 'peapver' can be used to force which PEAP version (0 or 1) is used.
+# 'peaplabel=1' can be used to force new label, "client PEAP encryption",
+# to be used during key derivation when PEAPv1 or newer. Most existing
+# PEAPv1 implementation seem to be using the old label, "client EAP
+# encryption", and wpa_supplicant is now using that as the default value.
+# Some servers, e.g., Radiator, may require peaplabel=1 configuration to
+# interoperate with PEAPv1; see eap_testing.txt for more details.
+# 'peap_outer_success=0' can be used to terminate PEAP authentication on
+# tunneled EAP-Success. This is required with some RADIUS servers that
+# implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g.,
+# Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode)
+# sim_min_num_chal=3 can be used to configure EAP-SIM to require three
+# challenges (by default, it accepts 2 or 3)
+# phase2: Phase2 (inner authentication with TLS tunnel) parameters
+# (string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or
+# "autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS)
+# Following certificate/private key fields are used in inner Phase2
+# authentication when using EAP-TTLS or EAP-PEAP.
+# ca_cert2: File path to CA certificate file. This file can have one or more
+# trusted CA certificates. If ca_cert2 is not included, server
+# certificate will not be verified. This is insecure and the CA file
+# should always be configured.
+# client_cert2: File path to client certificate file
+# private_key2: File path to client private key file
+# private_key2_passwd: Password for private key file
+# dh_file2: File path to DH/DSA parameters file (in PEM format)
+# subject_match2: Substring to be matched against the subject of the
+# authentication server certificate.
+#
+# EAP-PSK variables:
+# eappsk: 16-byte (128-bit, 32 hex digits) pre-shared key in hex format
+# nai: user NAI
+# server_nai: authentication server NAI
+#
+# EAP-FAST variables:
+# pac_file: File path for the PAC entries. wpa_supplicant will need to be able
+# to create this file and write updates to it when PAC is being
+# provisioned or refreshed.
+# phase1: fast_provisioning=1 option enables in-line provisioning of EAP-FAST
+# credentials (PAC)
+#
+# wpa_supplicant supports number of "EAP workarounds" to work around
+# interoperability issues with incorrectly behaving authentication servers.
+# These are enabled by default because some of the issues are present in large
+# number of authentication servers. Strict EAP conformance mode can be
+# configured by disabling workarounds with eap_workaround=0.
+
+# Example blocks:
+
+# Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers
+network={
+ ssid="simple"
+ psk="very secret passphrase"
+ priority=5
+}
+
+# Same as previous, but request SSID-specific scanning (for APs that reject
+# broadcast SSID)
+network={
+ ssid="second ssid"
+ scan_ssid=1
+ psk="very secret passphrase"
+ priority=2
+}
+
+# Only WPA-PSK is used. Any valid cipher combination is accepted.
+network={
+ ssid="example"
+ proto=WPA
+ key_mgmt=WPA-PSK
+ pairwise=CCMP TKIP
+ group=CCMP TKIP WEP104 WEP40
+ psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
+ priority=2
+}
+
+# Only WPA-EAP is used. Both CCMP and TKIP is accepted. An AP that used WEP104
+# or WEP40 as the group cipher will not be accepted.
+network={
+ ssid="example"
+ proto=RSN
+ key_mgmt=WPA-EAP
+ pairwise=CCMP TKIP
+ group=CCMP TKIP
+ eap=TLS
+ identity="user@example.com"
+ ca_cert="/etc/cert/ca.pem"
+ client_cert="/etc/cert/user.pem"
+ private_key="/etc/cert/user.prv"
+ private_key_passwd="password"
+ priority=1
+}
+
+# EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel
+# (e.g., Radiator)
+network={
+ ssid="example"
+ key_mgmt=WPA-EAP
+ eap=PEAP
+ identity="user@example.com"
+ password="foobar"
+ ca_cert="/etc/cert/ca.pem"
+ phase1="peaplabel=1"
+ phase2="auth=MSCHAPV2"
+ priority=10
+}
+
+# EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the
+# unencrypted use. Real identity is sent only within an encrypted TLS tunnel.
+network={
+ ssid="example"
+ key_mgmt=WPA-EAP
+ eap=TTLS
+ identity="user@example.com"
+ anonymous_identity="anonymous@example.com"
+ password="foobar"
+ ca_cert="/etc/cert/ca.pem"
+ priority=2
+}
+
+# EAP-TTLS/MSCHAPv2 configuration with anonymous identity for the unencrypted
+# use. Real identity is sent only within an encrypted TLS tunnel.
+network={
+ ssid="example"
+ key_mgmt=WPA-EAP
+ eap=TTLS
+ identity="user@example.com"
+ anonymous_identity="anonymous@example.com"
+ password="foobar"
+ ca_cert="/etc/cert/ca.pem"
+ phase2="auth=MSCHAPV2"
+}
+
+# WPA-EAP, EAP-TTLS with different CA certificate used for outer and inner
+# authentication.
+network={
+ ssid="example"
+ key_mgmt=WPA-EAP
+ eap=TTLS
+ # Phase1 / outer authentication
+ anonymous_identity="anonymous@example.com"
+ ca_cert="/etc/cert/ca.pem"
+ # Phase 2 / inner authentication
+ phase2="autheap=TLS"
+ ca_cert2="/etc/cert/ca2.pem"
+ client_cert2="/etc/cer/user.pem"
+ private_key2="/etc/cer/user.prv"
+ private_key2_passwd="password"
+ priority=2
+}
+
+# Both WPA-PSK and WPA-EAP is accepted. Only CCMP is accepted as pairwise and
+# group cipher.
+network={
+ ssid="example"
+ bssid=00:11:22:33:44:55
+ proto=WPA RSN
+ key_mgmt=WPA-PSK WPA-EAP
+ pairwise=CCMP
+ group=CCMP
+ psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
+}
+
+# Special characters in SSID, so use hex string. Default to WPA-PSK, WPA-EAP
+# and all valid ciphers.
+network={
+ ssid=00010203
+ psk=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f
+}
+
+
+# EAP-SIM with a GSM SIM or USIM
+network={
+ ssid="eap-sim-test"
+ key_mgmt=WPA-EAP
+ eap=SIM
+ pin="1234"
+ pcsc=""
+}
+
+
+# EAP-PSK
+network={
+ ssid="eap-psk-test"
+ key_mgmt=WPA-EAP
+ eap=PSK
+ identity="eap_psk_user"
+ eappsk=06b4be19da289f475aa46a33cb793029
+ nai="eap_psk_user@example.com"
+ server_nai="as@example.com"
+}
+
+
+# IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using
+# EAP-TLS for authentication and key generation; require both unicast and
+# broadcast WEP keys.
+network={
+ ssid="1x-test"
+ key_mgmt=IEEE8021X
+ eap=TLS
+ identity="user@example.com"
+ ca_cert="/etc/cert/ca.pem"
+ client_cert="/etc/cert/user.pem"
+ private_key="/etc/cert/user.prv"
+ private_key_passwd="password"
+ eapol_flags=3
+}
+
+
+# LEAP with dynamic WEP keys
+network={
+ ssid="leap-example"
+ key_mgmt=IEEE8021X
+ eap=LEAP
+ identity="user"
+ password="foobar"
+}
+
+# EAP-FAST with WPA (WPA or WPA2)
+network={
+ ssid="eap-fast-test"
+ key_mgmt=WPA-EAP
+ eap=FAST
+ anonymous_identity="FAST-000102030405"
+ identity="username"
+ password="password"
+ phase1="fast_provisioning=1"
+ pac_file="/etc/wpa_supplicant.eap-fast-pac"
+}
+
+# Plaintext connection (no WPA, no IEEE 802.1X)
+network={
+ ssid="plaintext-test"
+ key_mgmt=NONE
+}
+
+
+# Shared WEP key connection (no WPA, no IEEE 802.1X)
+network={
+ ssid="static-wep-test"
+ key_mgmt=NONE
+ wep_key0="abcde"
+ wep_key1=0102030405
+ wep_key2="1234567890123"
+ wep_tx_keyidx=0
+ priority=5
+}
+
+
+# Shared WEP key connection (no WPA, no IEEE 802.1X) using Shared Key
+# IEEE 802.11 authentication
+network={
+ ssid="static-wep-test2"
+ key_mgmt=NONE
+ wep_key0="abcde"
+ wep_key1=0102030405
+ wep_key2="1234567890123"
+ wep_tx_keyidx=0
+ priority=5
+ auth_alg=SHARED
+}
+
+
+# IBSS/ad-hoc network with WPA-None/TKIP.
+network={
+ ssid="test adhoc"
+ mode=1
+ proto=WPA
+ key_mgmt=WPA-NONE
+ pairwise=NONE
+ group=TKIP
+ psk="secret passphrase"
+}
+
+
+# Catch all example that allows more or less all configuration modes
+network={
+ ssid="example"
+ scan_ssid=1
+ key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE
+ pairwise=CCMP TKIP
+ group=CCMP TKIP WEP104 WEP40
+ psk="very secret passphrase"
+ eap=TTLS PEAP TLS
+ identity="user@example.com"
+ password="foobar"
+ ca_cert="/etc/cert/ca.pem"
+ client_cert="/etc/cert/user.pem"
+ private_key="/etc/cert/user.prv"
+ private_key_passwd="password"
+ phase1="peaplabel=0"
+}
HOMEPAGE = "http://hostap.epitest.fi/wpa_supplicant/"
DEPENDS = "openssl"
DEPENDS_mtx-1_append = "madwifi-modules"
-PR = "r0"
+PR = "r1"
SRC_URI = "http://hostap.epitest.fi/releases/wpa_supplicant-${PV}.tar.gz \
file://madwifi-bsd-fix.diff;patch=1;pnum=0 \
file://defconfig \
+ file://driver-hermes.patch;patch=1 \
file://wpa_supplicant.conf"
S = "${WORKDIR}/wpa_supplicant-${PV}"
--- /dev/null
+DESCRIPTION = "A Client for Wi-Fi Protected Access (WPA)."
+SECTION = "network"
+LICENSE = "GPL"
+MAINTAINER = "Holger Schurig"
+HOMEPAGE = "http://hostap.epitest.fi/wpa_supplicant/"
+DEPENDS = "openssl"
+DEPENDS_mtx-1_append = "madwifi-modules"
+PR = "r1"
+
+SRC_URI = "http://hostap.epitest.fi/releases/wpa_supplicant-${PV}.tar.gz \
+ file://madwifi-bsd-fix.diff;patch=1;pnum=0 \
+ file://defconfig \
+ file://driver-hermes.patch;patch=1 \
+ file://driver-zd1211.patch;patch=1 \
+ file://wpa_supplicant.conf"
+
+S = "${WORKDIR}/wpa_supplicant-${PV}"
+
+do_configure () {
+ install -m 0755 ${WORKDIR}/defconfig .config
+}
+
+do_compile () {
+ make
+}
+
+do_install () {
+ install -d ${D}${sbindir}
+ install -m755 wpa_supplicant ${D}${sbindir}
+ install -m755 wpa_passphrase ${D}${sbindir}
+ install -m755 wpa_cli ${D}${sbindir}
+
+ install -d ${D}${sysconfdir}
+ install -m644 ${WORKDIR}/wpa_supplicant.conf ${D}${sysconfdir}
+
+ install -d ${D}${docdir}/wpa_supplicant
+ install -m644 README ${D}${docdir}/wpa_supplicant
+}
--- /dev/null
+DESCRIPTION = "A Client for Wi-Fi Protected Access (WPA)."
+SECTION = "network"
+LICENSE = "GPL"
+MAINTAINER = "Holger Schurig"
+MAINTAINER = "Eric Shattow <lucent@gmail.com>"
+HOMEPAGE = "http://hostap.epitest.fi/wpa_supplicant/"
+DEPENDS = "gnutls madwifi-ng"
+
+PR = "r4"
+DEFAULT_PREFERENCE = "-1"
+
+SRC_URI = "http://hostap.epitest.fi/releases/wpa_supplicant-${PV}.tar.gz \
+ file://defconfig-gnutls \
+ file://init.sh \
+ file://defaults-sane \
+ file://wpa_supplicant.conf \
+ file://wpa_supplicant.conf-sane"
+
+S = "${WORKDIR}/wpa_supplicant-${PV}"
+
+PACKAGES_prepend = "wpa-supplicant-passphrase wpa-supplicant-cli "
+FILES_wpa-supplicant-passphrase = "/usr/sbin/wpa_passphrase"
+FILES_wpa-supplicant-cli = "/usr/sbin/wpa_cli"
+
+RRECOMMENDS_${PN} = "wpa-supplicant-passphrase wpa-supplicant-cli"
+
+INITSCRIPT_NAME = "wpa"
+INITSCRIPT_PARAMS = "defaults 10"
+inherit update-rc.d
+
+do_configure () {
+ install -m 0755 ${WORKDIR}/defconfig-gnutls .config
+ echo "CONFIG_DRIVER_MADWIFI=y" >> .config
+ echo "CFLAGS += -I${STAGING_INCDIR}/madwifi-ng" >> .config
+}
+
+do_compile () {
+ make
+}
+
+do_install () {
+ install -d ${D}${sbindir}
+ install -m755 wpa_supplicant ${D}${sbindir}
+ install -m755 wpa_passphrase ${D}${sbindir}
+ install -m755 wpa_cli ${D}${sbindir}
+
+ install -d ${D}${localstatedir}/run/wpa_supplicant
+
+ install -d ${D}${docdir}/wpa_supplicant
+ install -m644 README ${WORKDIR}/wpa_supplicant.conf ${D}${docdir}/wpa_supplicant
+
+ install -d ${D}${sysconfdir}/init.d
+ install -m700 ${WORKDIR}/init.sh ${D}${sysconfdir}/init.d/wpa
+
+ install -d ${D}${sysconfdir}/default
+ install -m600 ${WORKDIR}/defaults-sane ${D}${sysconfdir}/default/wpa
+ install -m600 ${WORKDIR}/wpa_supplicant.conf-sane ${D}${sysconfdir}/wpa_supplicant.conf
+}
