--- /dev/null
+#!/bin/sh
+
+
+WPA_SUP_BIN="/usr/sbin/wpa_supplicant"
+WPA_SUP_PNAME="wpa_supplicant"
+WPA_SUP_PIDFILE="/var/run/wpa_supplicant.$IFACE.pid"
+WPA_SUP_OPTIONS="-B -P $WPA_SUP_PIDFILE -i $IFACE"
+
+VERBOSITY=0
+
+
+if [ -s "$IF_WPA_CONF" ]; then
+ WPA_SUP_CONF="-c $IF_WPA_CONF"
+else
+ exit 0
+fi
+
+if [ ! -x "$WPA_SUP_BIN" ]; then
+
+ if [ "$VERBOSITY" = "1" ]; then
+ echo "$WPA_SUP_PNAME: binaries not executable or missing from $WPA_SUP_BIN"
+ fi
+
+ exit 1
+fi
+
+if [ "$MODE" = "start" ] ; then
+ # driver type of interface, defaults to wext when undefined
+ if [ -s "/etc/wpa_supplicant/driver.$IFACE" ]; then
+ IF_WPA_DRIVER=$(cat "/etc/wpa_supplicant/driver.$IFACE")
+ elif [ -z "$IF_WPA_DRIVER" ]; then
+
+ if [ "$VERBOSITY" = "1" ]; then
+ echo "$WPA_SUP_PNAME: wpa-driver not provided, using \"wext\""
+ fi
+
+ IF_WPA_DRIVER="wext"
+ fi
+
+ # if we have passed the criteria, start wpa_supplicant
+ if [ -n "$WPA_SUP_CONF" ]; then
+
+ if [ "$VERBOSITY" = "1" ]; then
+ echo "$WPA_SUP_PNAME: $WPA_SUP_BIN $WPA_SUP_OPTIONS $WPA_SUP_CONF -D $IF_WPA_DRIVER"
+ fi
+
+ start-stop-daemon --start --quiet \
+ --name $WPA_SUP_PNAME --startas $WPA_SUP_BIN --pidfile $WPA_SUP_PIDFILE \
+ -- $WPA_SUP_OPTIONS $WPA_SUP_CONF -D $IF_WPA_DRIVER
+ fi
+
+ # if the interface socket exists, then wpa_supplicant was invoked successfully
+ if [ -S "$WPA_COMMON_CTRL_IFACE/$IFACE" ]; then
+
+ if [ "$VERBOSITY" = "1" ]; then
+ echo "$WPA_SUP_PNAME: ctrl_interface socket located at $WPA_COMMON_CTRL_IFACE/$IFACE"
+ fi
+
+ exit 0
+
+ fi
+
+elif [ "$MODE" = "stop" ]; then
+
+ if [ -f "$WPA_SUP_PIDFILE" ]; then
+
+ if [ "$VERBOSITY" = "1" ]; then
+ echo "$WPA_SUP_PNAME: terminating $WPA_SUP_PNAME daemon"
+ fi
+
+ start-stop-daemon --stop --quiet \
+ --name $WPA_SUP_PNAME --pidfile $WPA_SUP_PIDFILE
+
+ if [ -S "$WPA_COMMON_CTRL_IFACE/$IFACE" ]; then
+ rm -f $WPA_COMMON_CTRL_IFACE/$IFACE
+ fi
+
+ if [ -f "$WPA_SUP_PIDFILE" ]; then
+ rm -f $WPA_SUP_PIDFILE
+ fi
+ fi
+
+fi
+
+exit 0
##### Example wpa_supplicant configuration file ###############################
+#
+# This file describes configuration file format and lists all available option.
+# Please also take a look at simpler configuration examples in 'examples'
+# subdirectory.
+#
# Empty lines and lines starting with # are ignored
# NOTE! This file may contain password information and should probably be made
# readable only by root user on multiuser systems.
+# Note: All file paths in this configuration file should use full (absolute,
+# not relative to working directory) path in order to allow working directory
+# to be changed. This can happen if wpa_supplicant is run in the background.
+
+# Whether to allow wpa_supplicant to update (overwrite) configuration
+#
+# This option can be used to allow wpa_supplicant to overwrite configuration
+# file whenever configuration is changed (e.g., new network block is added with
+# wpa_cli or wpa_gui, or a password is changed). This is required for
+# wpa_cli/wpa_gui to be able to store the configuration changes permanently.
+# Please note that overwriting configuration file will remove the comments from
+# it.
+#update_config=1
+
# global configuration (shared by all network blocks)
#
-# Interface for separate control program. If this is specified, wpa_supplicant
-# will create this directory and a UNIX domain socket for listening to requests
-# from external programs (CLI/GUI, etc.) for status information and
-# configuration. The socket file will be named based on the interface name, so
-# multiple wpa_supplicant processes can be run at the same time if more than
-# one interface is used.
+# Parameters for the control interface. If this is specified, wpa_supplicant
+# will open a control interface that is available for external programs to
+# manage wpa_supplicant. The meaning of this string depends on which control
+# interface mechanism is used. For all cases, the existance of this parameter
+# in configuration is used to determine whether the control interface is
+# enabled.
+#
+# For UNIX domain sockets (default on Linux and BSD): This is a directory that
+# will be created for UNIX domain sockets for listening to requests from
+# external programs (CLI/GUI, etc.) for status information and configuration.
+# The socket file will be named based on the interface name, so multiple
+# wpa_supplicant processes can be run at the same time if more than one
+# interface is used.
# /var/run/wpa_supplicant is the recommended directory for sockets and by
# default, wpa_cli will use it when trying to connect with wpa_supplicant.
-ctrl_interface=/var/run/wpa_supplicant
-
+#
# Access control for the control interface can be configured by setting the
# directory to allow only members of a group to use sockets. This way, it is
# possible to run wpa_supplicant as root (since it needs to change network
# not included in the configuration file, group will not be changed from the
# value it got by default when the directory or socket was created.
#
-# This variable can be a group name or gid.
-#ctrl_interface_group=wheel
-ctrl_interface_group=0
+# When configuring both the directory and group, use following format:
+# DIR=/var/run/wpa_supplicant GROUP=wheel
+# DIR=/var/run/wpa_supplicant GROUP=0
+# (group can be either group name or gid)
+#
+# For UDP connections (default on Windows): The value will be ignored. This
+# variable is just used to select that the control interface is to be created.
+# The value can be set to, e.g., udp (ctrl_interface=udp)
+#
+# For Windows Named Pipe: This value can be used to set the security descriptor
+# for controlling access to the control interface. Security descriptor can be
+# set using Security Descriptor String Format (see http://msdn.microsoft.com/
+# library/default.asp?url=/library/en-us/secauthz/security/
+# security_descriptor_string_format.asp). The descriptor string needs to be
+# prefixed with SDDL=. For example, ctrl_interface=SDDL=D: would set an empty
+# DACL (which will reject all connections). See README-Windows.txt for more
+# information about SDDL string format.
+#
+ctrl_interface=/var/run/wpa_supplicant
# IEEE 802.1X/EAPOL version
-# wpa_supplicant was implemented based on IEEE 802-1X-REV-d8 which defines
+# wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which defines
# EAPOL version 2. However, there are many APs that do not handle the new
# version number correctly (they seem to drop the frames completely). In order
# to make wpa_supplicant interoperate with these APs, the version number is set
# 0: driver takes care of scanning, AP selection, and IEEE 802.11 association
# parameters (e.g., WPA IE generation); this mode can also be used with
# non-WPA drivers when using IEEE 802.1X mode; do not try to associate with
-# APs (i.e., external program needs to control association)
+# APs (i.e., external program needs to control association). This mode must
+# also be used when using wired Ethernet drivers.
# 2: like 0, but associate with APs using security policy and SSID (but not
-# BSSID); this can be used, e.g., with ndiswrapper and NDIS driver to
+# BSSID); this can be used, e.g., with ndiswrapper and NDIS drivers to
# enable operation with hidden SSIDs and optimized roaming; in this mode,
-# only the first network block in the configuration file is used and this
-# configuration should have explicit security policy (i.e., only one option
-# in the lists) for key_mgmt, pairwise, group, proto variables
+# the network blocks in the configuration file are tried one by one until
+# the driver reports successful association; each network block should have
+# explicit security policy (i.e., only one option in the lists) for
+# key_mgmt, pairwise, group, proto variables
ap_scan=1
# EAP fast re-authentication
# Normally, there is no need to disable this.
fast_reauth=1
+# OpenSSL Engine support
+# These options can be used to load OpenSSL engines.
+# The two engines that are supported currently are shown below:
+# They are both from the opensc project (http://www.opensc.org/)
+# By default no engines are loaded.
+# make the opensc engine available
+#opensc_engine_path=/usr/lib/opensc/engine_opensc.so
+# make the pkcs11 engine available
+#pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so
+# configure the path to the pkcs11 module required by the pkcs11 engine
+#pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so
+
+# Dynamic EAP methods
+# If EAP methods were built dynamically as shared object files, they need to be
+# loaded here before being used in the network blocks. By default, EAP methods
+# are included statically in the build, so these lines are not needed
+#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_tls.so
+#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_md5.so
+
+# Driver interface parameters
+# This field can be used to configure arbitrary driver interace parameters. The
+# format is specific to the selected driver interface. This field is not used
+# in most cases.
+#driver_param="field=value"
+
+# Maximum lifetime for PMKSA in seconds; default 43200
+#dot11RSNAConfigPMKLifetime=43200
+# Threshold for reauthentication (percentage of PMK lifetime); default 70
+#dot11RSNAConfigPMKReauthThreshold=70
+# Timeout for security association negotiation in seconds; default 60
+#dot11RSNAConfigSATimeout=60
+
# network block
#
# Each network (usually AP's sharing the same SSID) is configured as a separate
#
# network block fields:
#
+# disabled:
+# 0 = this network can be used (default)
+# 1 = this network block is disabled (can be enabled through ctrl_iface,
+# e.g., with wpa_cli or wpa_gui)
+#
+# id_str: Network identifier string for external scripts. This value is passed
+# to external action script through wpa_cli as WPA_ID_STR environment
+# variable to make it easier to do network specific configuration.
+#
# ssid: SSID (mandatory); either as an ASCII string with double quotation or
# as hex string; network name
#
# priority value, the sooner the network is matched against the scan results).
# Within each priority group, networks will be selected based on security
# policy, signal strength, etc.
-# Please note that AP scanning with scan_ssid=1 is not using this priority to
-# select the order for scanning. Instead, it uses the order the networks are in
-# the configuration file.
+# Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are not
+# using this priority to select the order for scanning. Instead, they try the
+# networks in the order that used in the configuration file.
#
# mode: IEEE 802.11 operation mode
# 0 = infrastructure (Managed) mode, i.e., associate with an AP (default)
# only when the passphrase or SSID has actually changed.
#
# eapol_flags: IEEE 802.1X/EAPOL options (bit field)
-# Dynamic WEP key require for non-WPA mode
+# Dynamic WEP key required for non-WPA mode
# bit0 (1): require dynamically generated unicast WEP key
# bit1 (2): require dynamically generated broadcast WEP key
# (3 = require both keys; default)
+# Note: When using wired authentication, eapol_flags must be set to 0 for the
+# authentication to be completed successfully.
+#
+# proactive_key_caching:
+# Enable/disable opportunistic PMKSA caching for WPA2.
+# 0 = disabled (default)
+# 1 = enabled
+#
+# wep_key0..3: Static WEP key (ASCII in double quotation, e.g. "abcde" or
+# hex without quotation, e.g., 0102030405)
+# wep_tx_keyidx: Default WEP key index (TX) (0..3)
+#
+# peerkey: Whether PeerKey negotiation for direct links (IEEE 802.11e DLS) is
+# allowed. This is only used with RSN/WPA2.
+# 0 = disabled (default)
+# 1 = enabled
+#peerkey=1
#
# Following fields are only used with internal EAP implementation.
# eap: space-separated list of accepted EAP methods
# unencrypted identity with EAP types that support different tunnelled
# identity, e.g., EAP-TTLS)
# password: Password string for EAP
-# ca_cert: File path to CA certificate file. This file can have one or more
-# trusted CA certificates. If ca_cert is not included, server certificate
-# will not be verified. This is insecure and the CA file should always be
-# configured.
+# ca_cert: File path to CA certificate file (PEM/DER). This file can have one
+# or more trusted CA certificates. If ca_cert and ca_path are not
+# included, server certificate will not be verified. This is insecure and
+# a trusted CA certificate should always be configured when using
+# EAP-TLS/TTLS/PEAP. Full path should be used since working directory may
+# change when wpa_supplicant is run in the background.
+# On Windows, trusted CA certificates can be loaded from the system
+# certificate store by setting this to cert_store://<name>, e.g.,
+# ca_cert="cert_store://CA" or ca_cert="cert_store://ROOT".
+# Note that when running wpa_supplicant as an application, the user
+# certificate store (My user account) is used, whereas computer store
+# (Computer account) is used when running wpasvc as a service.
+# ca_path: Directory path for CA certificate files (PEM). This path may
+# contain multiple CA certificates in OpenSSL format. Common use for this
+# is to point to system trusted CA list which is often installed into
+# directory like /etc/ssl/certs. If configured, these certificates are
+# added to the list of trusted CAs. ca_cert may also be included in that
+# case, but it is not required.
# client_cert: File path to client certificate file (PEM/DER)
+# Full path should be used since working directory may change when
+# wpa_supplicant is run in the background.
+# Alternatively, a named configuration blob can be used by setting this
+# to blob://<blob name>.
# private_key: File path to client private key file (PEM/DER/PFX)
# When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be
# commented out. Both the private key and certificate will be read from
-# the PKCS#12 file in this case.
-# private_key_passwd: Password for private key file
+# the PKCS#12 file in this case. Full path should be used since working
+# directory may change when wpa_supplicant is run in the background.
+# Windows certificate store can be used by leaving client_cert out and
+# configuring private_key in one of the following formats:
+# cert://substring_to_match
+# hash://certificate_thumbprint_in_hex
+# for example: private_key="hash://63093aa9c47f56ae88334c7b65a4"
+# Note that when running wpa_supplicant as an application, the user
+# certificate store (My user account) is used, whereas computer store
+# (Computer account) is used when running wpasvc as a service.
+# Alternatively, a named configuration blob can be used by setting this
+# to blob://<blob name>.
+# private_key_passwd: Password for private key file (if left out, this will be
+# asked through control interface)
# dh_file: File path to DH/DSA parameters file (in PEM format)
# This is an optional configuration file for setting parameters for an
# ephemeral DH key exchange. In most cases, the default RSA
# sertificate is only accepted if it contains this string in the subject.
# The subject string is in following format:
# /C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com
+# altsubject_match: Semicolon separated string of entries to be matched against
+# the alternative subject name of the authentication server certificate.
+# If this string is set, the server sertificate is only accepted if it
+# contains one of the entries in an alternative subject name extension.
+# altSubjectName string is in following format: TYPE:VALUE
+# Example: EMAIL:server@example.com
+# Example: DNS:server.example.com;DNS:server2.example.com
+# Following types are supported: EMAIL, DNS, URI
# phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters
# (string with field-value pairs, e.g., "peapver=0" or
# "peapver=1 peaplabel=1")
# tunneled EAP-Success. This is required with some RADIUS servers that
# implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g.,
# Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode)
+# include_tls_length=1 can be used to force wpa_supplicant to include
+# TLS Message Length field in all TLS messages even if they are not
+# fragmented.
# sim_min_num_chal=3 can be used to configure EAP-SIM to require three
# challenges (by default, it accepts 2 or 3)
# phase2: Phase2 (inner authentication with TLS tunnel) parameters
# Following certificate/private key fields are used in inner Phase2
# authentication when using EAP-TTLS or EAP-PEAP.
# ca_cert2: File path to CA certificate file. This file can have one or more
-# trusted CA certificates. If ca_cert2 is not included, server
-# certificate will not be verified. This is insecure and the CA file
-# should always be configured.
+# trusted CA certificates. If ca_cert2 and ca_path2 are not included,
+# server certificate will not be verified. This is insecure and a trusted
+# CA certificate should always be configured.
+# ca_path2: Directory path for CA certificate files (PEM)
# client_cert2: File path to client certificate file
# private_key2: File path to client private key file
# private_key2_passwd: Password for private key file
# dh_file2: File path to DH/DSA parameters file (in PEM format)
# subject_match2: Substring to be matched against the subject of the
# authentication server certificate.
+# altsubject_match2: Substring to be matched against the alternative subject
+# name of the authentication server certificate.
+#
+# fragment_size: Maximum EAP fragment size in bytes (default 1398).
+# This value limits the fragment size for EAP methods that support
+# fragmentation (e.g., EAP-TLS and EAP-PEAP). This value should be set
+# small enough to make the EAP messages fit in MTU of the network
+# interface used for EAPOL. The default value is suitable for most
+# cases.
#
# EAP-PSK variables:
# eappsk: 16-byte (128-bit, 32 hex digits) pre-shared key in hex format
# nai: user NAI
-# server_nai: authentication server NAI
+#
+# EAP-PAX variables:
+# eappsk: 16-byte (128-bit, 32 hex digits) pre-shared key in hex format
+#
+# EAP-SAKE variables:
+# eappsk: 32-byte (256-bit, 64 hex digits) pre-shared key in hex format
+# (this is concatenation of Root-Secret-A and Root-Secret-B)
+# nai: user NAI (PEERID)
+#
+# EAP-GPSK variables:
+# eappsk: Pre-shared key in hex format (at least 128 bits, i.e., 32 hex digits)
+# nai: user NAI (ID_Client)
#
# EAP-FAST variables:
# pac_file: File path for the PAC entries. wpa_supplicant will need to be able
# to create this file and write updates to it when PAC is being
-# provisioned or refreshed.
+# provisioned or refreshed. Full path to the file should be used since
+# working directory may change when wpa_supplicant is run in the
+# background. Alternatively, a named configuration blob can be used by
+# setting this to blob://<blob name>
# phase1: fast_provisioning=1 option enables in-line provisioning of EAP-FAST
# credentials (PAC)
#
}
-# EAP-SIM with a GSM SIM or USIM
-network={
- ssid="eap-sim-test"
- key_mgmt=WPA-EAP
- eap=SIM
- pin="1234"
- pcsc=""
-}
-
-
-# EAP-PSK
-network={
- ssid="eap-psk-test"
- key_mgmt=WPA-EAP
- eap=PSK
- identity="eap_psk_user"
- eappsk=06b4be19da289f475aa46a33cb793029
- nai="eap_psk_user@example.com"
- server_nai="as@example.com"
-}
-
-
# IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using
# EAP-TLS for authentication and key generation; require both unicast and
# broadcast WEP keys.
password="foobar"
}
-# EAP-FAST with WPA (WPA or WPA2)
-network={
- ssid="eap-fast-test"
- key_mgmt=WPA-EAP
- eap=FAST
- anonymous_identity="FAST-000102030405"
- identity="username"
- password="password"
- phase1="fast_provisioning=1"
- pac_file="/etc/wpa_supplicant.eap-fast-pac"
-}
-
# Plaintext connection (no WPA, no IEEE 802.1X)
network={
ssid="plaintext-test"
private_key_passwd="password"
phase1="peaplabel=0"
}
+
+# Example of EAP-TLS with smartcard (openssl engine)
+network={
+ ssid="example"
+ key_mgmt=WPA-EAP
+ eap=TLS
+ proto=RSN
+ pairwise=CCMP TKIP
+ group=CCMP TKIP
+ identity="user@example.com"
+ ca_cert="/etc/cert/ca.pem"
+ client_cert="/etc/cert/user.pem"
+
+ engine=1
+
+ # The engine configured here must be available. Look at
+ # OpenSSL engine support in the global section.
+ # The key available through the engine must be the private key
+ # matching the client certificate configured above.
+
+ # use the opensc engine
+ #engine_id="opensc"
+ #key_id="45"
+
+ # use the pkcs11 engine
+ engine_id="pkcs11"
+ key_id="id_45"
+
+ # Optional PIN configuration; this can be left out and PIN will be
+ # asked through the control interface
+ pin="1234"
+}
+
+# Example configuration showing how to use an inlined blob as a CA certificate
+# data instead of using external file
+network={
+ ssid="example"
+ key_mgmt=WPA-EAP
+ eap=TTLS
+ identity="user@example.com"
+ anonymous_identity="anonymous@example.com"
+ password="foobar"
+ ca_cert="blob://exampleblob"
+ priority=20
+}
+
+blob-base64-exampleblob={
+SGVsbG8gV29ybGQhCg==
+}
+
+
+# Wildcard match for SSID (plaintext APs only). This example select any
+# open AP regardless of its SSID.
+network={
+ key_mgmt=NONE
+}
+++ /dev/null
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cass, these lines should use += in order not
-# to override previous values of the variables.
-
-CFLAGS = $(TARGET_CFLAGS) -I../hostapd -I../utils -I../driver/modules -Wall -MMD
-
-# for wpa_supplicant, wpa_cli
-LIBS = $(TARGET_LDFLAGS)
-
-# for wpa_passphrase:
-LIBS_p = $(TARGET_LDFLAGS)
-
-
-# Uncomment following two lines and fix the paths if you have installed openssl
-# in non-default location
-#CFLAGS += -I/usr/local/openssl/include
-#LIBS += -L/usr/local/openssl/lib
-
-# Example configuration for various cross-compilation platforms
-
-#### sveasoft (e.g., for Linksys WRT54G) ######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
-#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
-###############################################################################
-
-#### openwrt (e.g., for Linksys WRT54G) #######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
-# -I../WRT54GS/release/src/include
-#LIBS = -lssl
-###############################################################################
-
-
-# Driver interface for Host AP driver
-#CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for Agere driver
-#CONFIG_DRIVER_HERMES=y
-
-# Driver interface for madwifi driver
-#CONFIG_DRIVER_MADWIFI=y
-# Change include directories to match with the local setup
-#CFLAGS += -I../madwifi/wpa
-
-# Driver interface for Prism54 driver
-#CONFIG_DRIVER_PRISM54=y
-
-# Driver interface for ndiswrapper
-#CONFIG_DRIVER_NDISWRAPPER=y
-
-# Driver interface for Atmel driver
-#CONFIG_DRIVER_ATMEL=y
-
-# Driver interface for Broadcom driver
-#CONFIG_DRIVER_BROADCOM=y
-# Example path for wlioctl.h; change to match your configuration
-#CFLAGS += -I/opt/WRT54GS/release/src/include
-
-# Driver interface for Intel ipw2100 driver
-#CONFIG_DRIVER_IPW2100=y
-
-# Driver interface for the Zydas zd1211 driver
-CONFIG_DRIVER_ZD1211=y
-
-# Driver interface for generic Linux wireless extensions
-CONFIG_DRIVER_WEXT=y
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-
-# Driver interface for Windows NDIS
-#CONFIG_DRIVER_NDIS=y
-#CFLAGS += -I/usr/include/w32api/ddk
-#LIBS += -L/usr/local/lib
-# For native build using mingw
-#CONFIG_NATIVE_WINDOWS=y
-# Additional directories for cross-compilation on Linux host for mingw target
-#CFLAGS += -I/opt/mingw/mingw32/include/ddk
-#LIBS += -L/opt/mingw/mingw32/lib
-#CC=mingw32-gcc
-
-# Driver interface for development testing
-#CONFIG_DRIVER_TEST=y
-
-# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
-# included)
-CONFIG_IEEE8021X_EAPOL=y
-
-# EAP-MD5 (automatically included if EAP-TTLS is enabled)
-CONFIG_EAP_MD5=y
-
-# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled)
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-TLS
-CONFIG_EAP_TLS=y
-
-# EAL-PEAP
-CONFIG_EAP_PEAP=y
-
-# EAP-TTLS
-CONFIG_EAP_TTLS=y
-
-# EAP-GTC
-CONFIG_EAP_GTC=y
-
-# EAP-OTP
-CONFIG_EAP_OTP=y
-
-# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
-#CONFIG_EAP_SIM=y
-
-# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# LEAP
-CONFIG_EAP_LEAP=y
-
-# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
-#CONFIG_EAP_AKA=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# PC/SC interface for smartcards (USIM, GSM SIM)
-# Enable this if EAP-SIM or EAP-AKA is included
-#CONFIG_PCSC=y
-
-# Development testing
-#CONFIG_EAPOL_TEST=y
-
-# Replace native Linux implementation of packet sockets with libdnet/libpcap.
-# This will be automatically set for non-Linux OS.
-#CONFIG_DNET_PCAP=y
-
-# Include control interface for external programs, e.g, wpa_cli
-CONFIG_CTRL_IFACE=y
-
-# Include interface for using external supplicant (Xsupplicant) for EAP
-# authentication
-#CONFIG_XSUPPLICANT_IFACE=y
-
-# Include support for GNU Readline and History Libraries in wpa_cli.
-# When building a wpa_cli binary for distribution, please note that these
-# libraries are licensed under GPL and as such, BSD license may not apply for
-# the resulting binary.
-#CONFIG_READLINE=y
+++ /dev/null
---- /dev/null
-+++ wpa_supplicant-0.4.7/driver_hermes.c
-@@ -0,0 +1,705 @@
-+/*
-+ * WPA Supplicant - testing driver interface
-+ * Copyright (c) 2004-2005, Jouni Malinen <jkmaline@cc.hut.fi>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * Alternatively, this software may be distributed under the terms of BSD
-+ * license.
-+ *
-+ * See README and COPYING for more details.
-+ */
-+
-+#include <stdlib.h>
-+#include <stdio.h>
-+#include <unistd.h>
-+#include <string.h>
-+#include <sys/ioctl.h>
-+#include <errno.h>
-+#include <net/if_arp.h>
-+
-+#include "wireless_copy.h"
-+#include "common.h"
-+#include "driver.h"
-+
-+#include "eloop.h"
-+#include "wpa_supplicant.h"
-+#include "priv_netlink.h"
-+
-+#include "hostap_common.h"
-+#include "driver_wext.h"
-+#include "driver_hermes.h"
-+
-+
-+
-+/* Enumeration for supported Hermes Types */
-+enum
-+{
-+ WL_HERMES_UNKNOWN = 0,
-+ WL_HERMES_1 = 1,
-+ WL_HERMES_2 = 2,
-+ WL_HERMES_25 = 3
-+};
-+
-+
-+
-+
-+struct wpa_driver_hermes_data {
-+ void *wext; /* private data for driver_wext */
-+ void *ctx;
-+ char ifname[IFNAMSIZ + 1];
-+ int sock;
-+ int type;
-+};
-+
-+
-+
-+/****************************************************************************/
-+/* */
-+/* Routines for basic device access to Agere Hermes-I/Hermes-II via the UIL */
-+/* */
-+/****************************************************************************/
-+
-+IFBP _connect(void *priv)
-+{
-+ struct wpa_driver_hermes_data *drv = priv;
-+ int result = 0;
-+ IFBP ifbp = NULL;
-+ struct uilreq urq;
-+
-+ //wpa_printf(MSG_DEBUG, "%s: %s %d", __FUNCTION__, drv->ifname, drv->sock);
-+
-+ memset(&urq, 0, sizeof(urq));
-+
-+ strcpy(urq.ifr_name, drv->ifname);
-+ urq.command = UIL_FUN_CONNECT;
-+
-+ result = ioctl(drv->sock, WVLAN2_IOCTL_UIL, &urq);
-+ if (result == 0 && urq.result == UIL_SUCCESS) {
-+ ifbp = urq.hcfCtx;
-+ } else {
-+ wpa_printf(MSG_DEBUG, "%s: could not set IFBP, result %d", __FUNCTION__, result);
-+ }
-+
-+ return ifbp;
-+}
-+
-+
-+void _disconnect(void *priv, IFBP ifbp)
-+{
-+ struct wpa_driver_hermes_data *drv = priv;
-+ int result = 0;
-+ struct uilreq urq;
-+
-+ //wpa_printf(MSG_DEBUG, "%s: %s", __FUNCTION__, drv->ifname);
-+
-+ if (ifbp != NULL) {
-+ memset(&urq, 0, sizeof(struct uilreq));
-+
-+ strcpy(urq.ifr_name, drv->ifname);
-+ urq.command = UIL_FUN_DISCONNECT;
-+ urq.hcfCtx = ifbp;
-+
-+ result = ioctl(drv->sock, WVLAN2_IOCTL_UIL, &urq);
-+
-+ if (result != 0 || urq.result != UIL_SUCCESS) {
-+ wpa_printf( MSG_WARNING, "wl_disconnect(): ioctl() failed, errno: %d", errno );
-+ wpa_printf( MSG_WARNING, "wl_disconnect(): urq.result: %d", urq.result );
-+ }
-+ } else {
-+ wpa_printf(MSG_WARNING, "wl_disconnect(): called with NULL ifbp");
-+ }
-+
-+ return;
-+}
-+
-+int _get_info(void *priv, ltv_t *ltv)
-+{
-+ struct wpa_driver_hermes_data *drv = priv;
-+ int result = 0;
-+ IFBP ifbp = NULL;
-+ struct uilreq urq;
-+
-+ //wpa_printf(MSG_DEBUG, "%s: %s", __FUNCTION__, drv->ifname);
-+
-+ /* First, connect to the device */
-+ ifbp = _connect(priv);
-+ if (ifbp != NULL && ltv != NULL) {
-+ memset(&urq, 0, sizeof(struct uilreq));
-+
-+ strcpy(urq.ifr_name, drv->ifname);
-+ urq.hcfCtx = ifbp;
-+ urq.command = UIL_FUN_GET_INFO;
-+ urq.len = sizeof(ltv_t);
-+ urq.data = ltv;
-+
-+ result = ioctl(drv->sock, WVLAN2_IOCTL_UIL, &urq);
-+
-+ if (result != 0 || urq.result != UIL_SUCCESS) {
-+ wpa_printf(MSG_WARNING, "wl_disconnect(): ioctl() failed, errno: %d", errno);
-+ wpa_printf(MSG_WARNING, "wl_disconnect(): urq.result: %d", urq.result);
-+ }
-+ _disconnect(priv, ifbp);
-+ } else {
-+ wpa_printf( MSG_WARNING, "Could not connect to the device, or LTV NULL");
-+ result = -1;
-+ }
-+
-+ return result;
-+}
-+
-+int _put_info(void *priv, ltv_t *ltv)
-+{
-+ struct wpa_driver_hermes_data *drv = priv;
-+ int result = 0;
-+ IFBP ifbp = NULL;
-+ struct uilreq urq;
-+
-+ //wpa_printf(MSG_DEBUG, "%s: %s", __FUNCTION__, drv->ifname);
-+
-+ /* First, connect to the device */
-+ ifbp = _connect(priv);
-+ if (ifbp != NULL && ltv != NULL) {
-+ memset(&urq, 0, sizeof(struct uilreq));
-+
-+ strcpy(urq.ifr_name, drv->ifname);
-+ urq.hcfCtx = ifbp;
-+ urq.command = UIL_FUN_PUT_INFO;
-+ urq.len = sizeof( ltv_t );
-+ urq.data = ltv;
-+
-+ result = ioctl(drv->sock, WVLAN2_IOCTL_UIL, &urq);
-+
-+ if (result != 0 || urq.result != UIL_SUCCESS) {
-+ wpa_printf(MSG_WARNING, "_put_info(): ioctl() failed, errno: %d", errno);
-+ wpa_printf(MSG_WARNING, "_put_info(): urq.result: %d", urq.result);
-+ }
-+
-+ _disconnect(priv, ifbp);
-+ } else {
-+ wpa_printf(MSG_WARNING, "%s: could not connect to the device, or LTV NULL", __FUNCTION__ );
-+ result = -1;
-+ }
-+
-+ return result;
-+}
-+
-+
-+static void _detect_hermes_type(void *priv)
-+{
-+ struct wpa_driver_hermes_data *drv = priv;
-+ CFG_FW_IDENTITY_STRCT *fw_id;
-+ ltv_t ltv;
-+ int result;
-+
-+ //wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);
-+
-+ drv->type = WL_HERMES_UNKNOWN;
-+
-+ if (drv->sock >= 0) {
-+ fw_id = (CFG_FW_IDENTITY_STRCT *)<v;
-+ fw_id->len = ( sizeof(CFG_FW_IDENTITY_STRCT) / sizeof( hcf_16 )) - 1;
-+ fw_id->typ = CFG_FW_IDENTITY;
-+
-+ result = _get_info(priv, (ltv_t *)fw_id);
-+ if (result == HCF_SUCCESS) {
-+ //wpa_printf(MSG_DEBUG, "PRI CompID : %d", fw_id->comp_id);
-+ //wpa_printf(MSG_DEBUG, "PRI Variant : %d", fw_id->variant);
-+ //wpa_printf(MSG_DEBUG, "PRI Version : %d.%02d", fw_id->version_major, fw_id->version_minor);
-+
-+ switch(fw_id->comp_id) {
-+ case COMP_ID_FW_STA:
-+ switch (fw_id->variant) {
-+ case 1:
-+ case 2:
-+ wpa_printf(MSG_DEBUG, "found Hermes 1 STA");
-+ drv->type = WL_HERMES_1;
-+ break;
-+
-+ case 3:
-+ wpa_printf(MSG_DEBUG, "found Hermes 2 STA");
-+ drv->type = WL_HERMES_2;
-+ break;
-+ case 4:
-+ wpa_printf(MSG_DEBUG, "found Hermes 2.5 STA");
-+ drv->type = WL_HERMES_25;
-+ break;
-+ }
-+ break;
-+
-+ case COMP_ID_FW_AP:
-+ switch (fw_id->variant) {
-+ case 1:
-+ wpa_printf(MSG_DEBUG, "found Hermes 1 AP");
-+ drv->type = WL_HERMES_1;
-+ break;
-+
-+ case 2:
-+ wpa_printf(MSG_DEBUG, "found Hermes 2 AP" );
-+ drv->type = WL_HERMES_2;
-+ break;
-+ }
-+ break;
-+
-+ default:
-+ wpa_printf(MSG_WARNING, "could not detect Hermes type!");
-+ break;
-+ }
-+ }
-+ }
-+}
-+
-+
-+
-+/****************************************************************************/
-+
-+
-+static int wpa_driver_hermes_set_wpa_ie(void *priv, const char *wpa_ie,
-+ size_t wpa_ie_len)
-+{
-+ struct wpa_driver_hermes_data *drv = priv;
-+ ltv_t ltv;
-+
-+ wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);
-+
-+ ltv.len = 2;
-+ ltv.typ = CFG_SET_WPA_AUTH_KEY_MGMT_SUITE;
-+
-+ switch(drv->type) {
-+ case WL_HERMES_1:
-+ ltv.u.u16[0] = 2;
-+ break;
-+
-+ case WL_HERMES_2:
-+ case WL_HERMES_25:
-+ ltv.u.u16[0] = 4;
-+ break;
-+
-+ default:
-+ ltv.u.u16[0] = 0;
-+ break;
-+ }
-+
-+ return _put_info(priv, <v);
-+}
-+
-+
-+static int wpa_driver_hermes_set_wpa(void *priv, int enabled)
-+{
-+ ltv_t ltv;
-+
-+ wpa_printf(MSG_DEBUG, "%s: enabled=%d", __func__, enabled);
-+
-+ ltv.len = 2;
-+ ltv.typ = CFG_CNF_ENCRYPTION;
-+ ltv.u.u16[0] = enabled ? 2 : 0; /* Setting CFG_CNF_ENCRYPTION to 2 sets WPA: TKIP or better */
-+
-+ return _put_info(priv, <v);
-+}
-+
-+
-+static int wpa_driver_hermes_set_key(void *priv, wpa_alg alg,
-+ const u8 *addr, int key_idx,
-+ int set_tx, const u8 *seq, size_t seq_len,
-+ const u8 *key, size_t key_len)
-+{
-+ struct wpa_driver_hermes_data *drv = priv;
-+ int ret = 0;
-+ char *alg_name;
-+ ltv_t ltv;
-+ int count = 0;
-+ int buf_idx = 0;
-+ hcf_8 tsc[] = { 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00 };
-+ hcf_8 rsc[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
-+
-+
-+ switch (alg) {
-+ case WPA_ALG_NONE:
-+ alg_name = "none";
-+ break;
-+ case WPA_ALG_WEP:
-+ alg_name = "WEP";
-+ break;
-+ case WPA_ALG_TKIP:
-+ alg_name = "TKIP";
-+ break;
-+ case WPA_ALG_CCMP:
-+ alg_name = "CCMP";
-+ break;
-+ default:
-+ return -1;
-+ }
-+
-+ wpa_printf(MSG_DEBUG, "%s: alg=%s key_idx=%d set_tx=%d seq_len=%d "
-+ "key_len=%d", __FUNCTION__, alg_name, key_idx, set_tx,
-+ seq_len, key_len);
-+
-+ if (seq_len > IW_ENCODE_SEQ_MAX_SIZE) {
-+ wpa_printf(MSG_DEBUG, "%s: Invalid seq_len %lu", __FUNCTION__, (unsigned long) seq_len);
-+ return -2;
-+ }
-+
-+ /* Check the key index here; if 0, load as Pairwise Key, otherwise, load as
-+ a group key. Note that for the Hermes, the RIDs for group/pairwise keys
-+ are different from each other and different than the default WEP keys as
-+ well. */
-+ switch (alg) {
-+ case WPA_ALG_TKIP:
-+ /* Make sure that there is no data queued up in the firmware before
-+ setting the TKIP keys. If this check is not performed, some data
-+ may be sent out with incorrect MIC and cause synchronizarion
-+ errors with the AP */
-+ /* Check every 1ms for 100ms */
-+ for (count = 0; count < 100; count++) {
-+ usleep(1000);
-+
-+ ltv.len = 2;
-+ ltv.typ = 0xFD91; // This RID not defined in HCF yet!!!
-+ ltv.u.u16[0] = 0;
-+
-+ _get_info( priv, <v);
-+
-+ if (ltv.u.u16[0] == 0)
-+ break;
-+ }
-+
-+ if (count == 100)
-+ wpa_printf(MSG_DEBUG, "%s: Timed out waiting for TxQ!", __FUNCTION__);
-+
-+
-+ switch (key_idx) {
-+ case 0:
-+ /* Only load key as pairwise key for Hermes-II and II.5. For Hermes-I,
-+ fall through to the next case and load the pairwise key as
-+ a Group Key at index 0. */
-+ if (drv->type == WL_HERMES_2 || drv->type == WL_HERMES_25) {
-+ ltv.len = 28;
-+ ltv.typ = CFG_ADD_TKIP_MAPPED_KEY;
-+
-+ /* Load the BSSID */
-+ memcpy(<v.u.u8[buf_idx], addr, ETH_ALEN);
-+ buf_idx += ETH_ALEN;
-+
-+ /* Load the TKIP key */
-+ memcpy(<v.u.u8[buf_idx], &key[0], 16);
-+ buf_idx += 16;
-+
-+ /* Load the TSC */
-+ memcpy(<v.u.u8[buf_idx], tsc, 8);
-+ buf_idx += 8;
-+
-+ /* Load the RSC */
-+ /* Copy the RSC from the supplicant to a local buffer, because
-+ the RSC doesn't always contain the padding needed */
-+ memcpy(rsc, seq, seq_len);
-+ memcpy(<v.u.u8[buf_idx], rsc, 8);
-+ buf_idx += 8;
-+
-+ /* Load the TxMIC key */
-+ memcpy(<v.u.u8[buf_idx], &key[16], 8);
-+ buf_idx += 8;
-+
-+ /* Load the RxMIC key */
-+ memcpy(<v.u.u8[buf_idx], &key[24], 8);
-+
-+ /* Send the request to the Hermes */
-+ _put_info(priv, <v);
-+ break;
-+ }
-+
-+ case 1:
-+ case 2:
-+ case 3:
-+ ltv.len = 26;
-+ ltv.typ = CFG_ADD_TKIP_DEFAULT_KEY;
-+
-+ /* Load the key Index */
-+ ltv.u.u16[buf_idx] = key_idx;
-+
-+ /* If this is a Tx Key, set bit 8000 */
-+ if (set_tx)
-+ ltv.u.u16[buf_idx] |= 0x8000;
-+
-+ buf_idx += 2;
-+
-+ /* Load the RSC */
-+ /* Copy the RSC from the supplicant to a local buffer, because
-+ the RSC doesn't always contain the padding needed */
-+ memcpy(rsc, seq, seq_len);
-+ memcpy(<v.u.u8[buf_idx], rsc, 8);
-+ buf_idx += 8;
-+
-+ /* Load the TKIP, TxMIC, and RxMIC keys in one shot, because in
-+ CFG_ADD_TKIP_DEFAULT_KEY they are back-to-back */
-+ memcpy(<v.u.u8[buf_idx], key, key_len);
-+ buf_idx += key_len;
-+
-+ /* Load the TSC */
-+ memcpy(<v.u.u8[buf_idx], tsc, 8);
-+
-+ /* Send the request to the Hermes */
-+ _put_info(priv, <v);
-+ break;
-+
-+ default:
-+ break;
-+ }
-+
-+ break;
-+
-+ case WPA_ALG_WEP:
-+ case WPA_ALG_CCMP:
-+ break;
-+
-+ case WPA_ALG_NONE:
-+ switch (key_idx) {
-+ case 0:
-+ if (drv->type == WL_HERMES_2 || drv->type == WL_HERMES_25) {
-+ /* Only clear a pairwise key for Hermes-II. For Hermes-I,
-+ fall through to the next case and clear the key as a
-+ Group Key at index 0. */
-+ if (addr) {
-+ ltv.len = 7;
-+ ltv.typ = CFG_REMOVE_TKIP_MAPPED_KEY;
-+
-+ memcpy(<v.u.u8[0], addr, ETH_ALEN);
-+
-+ _put_info(priv, <v);
-+ }
-+ break;
-+ }
-+
-+ case 1:
-+ case 2:
-+ case 3:
-+ /* Clear the Group TKIP keys by index */
-+ ltv.len = 2;
-+ ltv.typ = CFG_REMOVE_TKIP_DEFAULT_KEY;
-+
-+ ltv.u.u16[0] = key_idx;
-+
-+ _put_info(priv, <v);
-+ break;
-+
-+ default:
-+ break;
-+ }
-+ break;
-+
-+ default:
-+ break;
-+ }
-+
-+ return ret;
-+}
-+
-+
-+static int wpa_driver_hermes_set_countermeasures(void *priv, int enabled)
-+{
-+ ltv_t ltv;
-+
-+ /* The supplicant handles all the timers related to MIC failure and
-+ countermeasures. When countermeasures are enabled, shut down the card;
-+ when disable, re-enable the card. Make sure that the EAPOL message
-+ is getting out before card disable */
-+
-+ wpa_printf(MSG_DEBUG, "%s: enabled=%d", __FUNCTION__, enabled);
-+
-+ ltv.len = 2;
-+ ltv.typ = CFG_DRIVER_ENABLE;
-+ ltv.u.u16[0] = enabled ? 0 : 1;
-+
-+ return _put_info(priv, <v);
-+}
-+
-+
-+static int wpa_driver_hermes_set_drop_unencrypted(void *priv, int enabled)
-+{
-+ ltv_t ltv;
-+
-+ wpa_printf(MSG_DEBUG, "%s: enabled=%d", __FUNCTION__, enabled);
-+
-+ ltv.len = 2;
-+ ltv.typ = CFG_CNF_EXCL_UNENCRYPTED;
-+ ltv.u.u16[0] = enabled;
-+
-+ return _put_info(priv, <v);
-+}
-+
-+
-+static int wpa_driver_hermes_deauthenticate(void *priv, const u8 *addr,
-+ int reason_code)
-+{
-+ wpa_printf(MSG_DEBUG, "%s: *DUMMY* %d", __FUNCTION__, reason_code);
-+
-+ return 0;
-+}
-+
-+
-+static int wpa_driver_hermes_disassociate(void *priv, const u8 *addr, int reason_code)
-+{
-+ ltv_t ltv;
-+
-+ wpa_printf(MSG_DEBUG, "%s: reason=%d", __FUNCTION__, reason_code);
-+
-+ ltv.len = 2;
-+ ltv.typ = 0xFCC8; // This RID not defined in HCF yet!!!
-+ memcpy( <v.u.u8[0], addr, ETH_ALEN );
-+ ltv.u.u16[ETH_ALEN / 2] = reason_code;
-+
-+ return _put_info( priv, <v);
-+}
-+
-+
-+static int wpa_driver_hermes_associate(
-+ void *priv, struct wpa_driver_associate_params *params)
-+{
-+ struct wpa_driver_hermes_data *drv = priv;
-+
-+#if 0
-+ wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);
-+#else
-+ wpa_printf(MSG_DEBUG, "%s: priv=%p freq=%d pairwise_suite=%d "
-+ "group_suite=%d key_mgmt_suite=%d auth_alg=%d mode=%d",
-+ __func__, priv, params->freq, params->pairwise_suite,
-+ params->group_suite, params->key_mgmt_suite,
-+ params->auth_alg, params->mode);
-+ if (params->bssid) {
-+ wpa_printf(MSG_DEBUG, " bssid=" MACSTR,
-+ MAC2STR(params->bssid));
-+ }
-+ if (params->ssid) {
-+ wpa_hexdump_ascii(MSG_DEBUG, " ssid",
-+ params->ssid, params->ssid_len);
-+ }
-+ if (params->wpa_ie) {
-+ wpa_hexdump(MSG_DEBUG, " wpa_ie",
-+ params->wpa_ie, params->wpa_ie_len);
-+ }
-+#endif
-+
-+ if (wpa_driver_hermes_set_wpa_ie(priv, params->wpa_ie, params->wpa_ie_len) < 0)
-+ return -1;
-+ if (wpa_driver_wext_set_freq(drv->wext, params->freq) < 0)
-+ return -1;
-+ if (wpa_driver_wext_set_ssid(drv->wext, params->ssid, params->ssid_len) < 0)
-+ return -1;
-+#ifdef UNSUPPORTED_IN_HERMES_DRIVER
-+ if (wpa_driver_wext_hermes_bssid(drv->wext, params->bssid) < 0)
-+ return -1;
-+#endif
-+
-+ return 0;
-+}
-+
-+
-+static int wpa_driver_hermes_get_bssid(void *priv, u8 *bssid)
-+{
-+ struct wpa_driver_hermes_data *drv = priv;
-+ return wpa_driver_wext_get_bssid(drv->wext, bssid);
-+}
-+
-+
-+static int wpa_driver_hermes_get_ssid(void *priv, u8 *ssid)
-+{
-+ struct wpa_driver_hermes_data *drv = priv;
-+ return wpa_driver_wext_get_ssid(drv->wext, ssid);
-+}
-+
-+
-+static int wpa_driver_hermes_scan(void *priv, const u8 *ssid, size_t ssid_len)
-+{
-+ struct wpa_driver_hermes_data *drv = priv;
-+ return wpa_driver_wext_scan(drv->wext, ssid, ssid_len);
-+}
-+
-+
-+static int wpa_driver_hermes_get_scan_results(void *priv,
-+ struct wpa_scan_result *results,
-+ size_t max_size)
-+{
-+ struct wpa_driver_hermes_data *drv = priv;
-+ return wpa_driver_wext_get_scan_results(drv->wext, results, max_size);
-+}
-+
-+
-+static void * wpa_driver_hermes_init(void *ctx, const char *ifname)
-+{
-+ struct wpa_driver_hermes_data *drv;
-+
-+ wpa_printf(MSG_DEBUG, "%s: %s", __FUNCTION__, ifname);
-+
-+ drv = malloc(sizeof(*drv));
-+ if (drv == NULL)
-+ return NULL;
-+ memset(drv, 0, sizeof(*drv));
-+
-+ /* Initialize wireless context */
-+ drv->wext = wpa_driver_wext_init(ctx, ifname);
-+ if (drv->wext == NULL) {
-+ perror("no wext context");
-+ goto no_wext;
-+ }
-+
-+ drv->ctx = ctx;
-+ strncpy(drv->ifname, ifname, sizeof(drv->ifname));
-+
-+ drv->sock = socket(PF_INET, SOCK_DGRAM, 0);
-+ if (drv->sock < 0) {
-+ perror("socket(PF_INET,SOCK_DGRAM)");
-+ goto no_sock;
-+ }
-+
-+ _detect_hermes_type(drv);
-+
-+ return drv;
-+
-+no_sock:
-+ wpa_driver_wext_deinit(drv->wext);
-+no_wext:
-+ free(drv);
-+ return NULL;
-+}
-+
-+
-+static void wpa_driver_hermes_deinit(void *priv)
-+{
-+ struct wpa_driver_hermes_data *drv = priv;
-+ wpa_driver_wext_deinit(drv->wext);
-+ close(drv->sock);
-+ free(drv);
-+}
-+
-+
-+
-+
-+struct wpa_driver_ops wpa_driver_hermes_ops = {
-+ .name = "hermes",
-+ .desc = "wpa_supplicant hermes driver",
-+
-+ .init = wpa_driver_hermes_init,
-+ .deinit = wpa_driver_hermes_deinit,
-+
-+ // from old driver_hermes.c:
-+ .get_bssid = wpa_driver_hermes_get_bssid,
-+ .get_ssid = wpa_driver_hermes_get_ssid,
-+ .set_wpa = wpa_driver_hermes_set_wpa,
-+ .set_key = wpa_driver_hermes_set_key,
-+ //.events_init = wpa_driver_wext_events_init,
-+ //.events_deinit = wpa_driver_wext_events_deinit,
-+ .set_countermeasures = wpa_driver_hermes_set_countermeasures,
-+ .set_drop_unencrypted = wpa_driver_hermes_set_drop_unencrypted,
-+ .scan = wpa_driver_hermes_scan,
-+ .get_scan_results = wpa_driver_hermes_get_scan_results,
-+ .deauthenticate = wpa_driver_hermes_deauthenticate,
-+ .disassociate = wpa_driver_hermes_disassociate,
-+ .associate = wpa_driver_hermes_associate,
-+
-+
-+#if 0
-+ /* Not possible with current Hermes driver:
-+ .set_auth_alg = wpa_driver_hermes_set_auth_alg, */
-+#endif
-+};
---- /dev/null
-+++ wpa_supplicant-0.4.7/driver_hermes.h
-@@ -0,0 +1,173 @@
-+#ifndef HERMES_DRIVER_H
-+#define HERMES_DRIVER_H
-+
-+typedef unsigned char hcf_8;
-+typedef unsigned short hcf_16;
-+typedef unsigned long hcf_32;
-+typedef hcf_16 hcf_io;
-+typedef hcf_8 *wci_bufp;
-+
-+typedef struct {
-+ hcf_16 len;
-+ hcf_16 typ;
-+ unsigned short * bufp;
-+} RID_LOG_STRCT;
-+typedef RID_LOG_STRCT *RID_LOGP;
-+
-+typedef struct {
-+ hcf_16 len;
-+ hcf_16 typ;
-+ hcf_16 comp_id;
-+ hcf_16 variant;
-+ hcf_16 version_major;
-+ hcf_16 version_minor;
-+} CFG_FW_IDENTITY_STRCT;
-+
-+typedef struct {
-+ hcf_32 TxUnicastFrames;
-+ hcf_32 TxMulticastFrames;
-+ hcf_32 TxFragments;
-+ hcf_32 TxUnicastOctets;
-+ hcf_32 TxMulticastOctets;
-+ hcf_32 TxDeferredTransmissions;
-+ hcf_32 TxSingleRetryFrames;
-+ hcf_32 TxMultipleRetryFrames;
-+ hcf_32 TxRetryLimitExceeded;
-+ hcf_32 TxDiscards;
-+ hcf_32 RxUnicastFrames;
-+ hcf_32 RxMulticastFrames;
-+ hcf_32 RxFragments;
-+ hcf_32 RxUnicastOctets;
-+ hcf_32 RxMulticastOctets;
-+ hcf_32 RxFCSErrors;
-+ hcf_32 RxDiscardsNoBuffer;
-+ hcf_32 TxDiscardsWrongSA;
-+ hcf_32 RxWEPUndecryptable;
-+ hcf_32 RxMsgInMsgFragments;
-+ hcf_32 RxMsgInBadMsgFragments;
-+ hcf_32 RxDiscardsWEPICVError;
-+ hcf_32 RxDiscardsWEPExcluded;
-+} CFG_HERMES_TALLIES_STRCT;
-+
-+typedef struct {
-+ hcf_32 not_used_NoBufInq;
-+ hcf_32 NoBufInfo;
-+ hcf_32 NoBufMB;
-+ hcf_32 MiscErr;
-+ hcf_32 EngCnt;
-+} CFG_HCF_TALLIES_STRCT;
-+
-+typedef struct {
-+ hcf_io IFB_IOBase;
-+ hcf_16 IFB_IORange;
-+
-+ hcf_32 IFB_TickIni;
-+
-+ hcf_16 IFB_Version;
-+ hcf_16 IFB_CardStat;
-+ hcf_16 IFB_TraceLvl;
-+ hcf_16 *IFB_MBp;
-+ hcf_16 IFB_MBSize;
-+ hcf_16 IFB_MBWp;
-+ hcf_16 IFB_MBRp;
-+ hcf_16 IFB_MBInfoLen;
-+
-+ hcf_16 IFB_DLMode;
-+ hcf_16 IFB_Magic;
-+ hcf_16 IFB_Cmd;
-+ hcf_16 IFB_RxFID;
-+ RID_LOGP IFB_RIDLogp;
-+ hcf_16 IFB_Monitor;
-+ hcf_16 IFB_TxFid;
-+ hcf_16 IFB_RxLen;
-+ hcf_16 IFB_DefunctStat;
-+
-+ hcf_16 IFB_ErrCmd;
-+ hcf_16 IFB_ErrQualifier;
-+ hcf_16 IFB_lal;
-+ wci_bufp IFB_lap;
-+ hcf_16 IFB_LinkStat;
-+
-+ void (*IFB_MICRxRtn)( hcf_32*, hcf_32 );
-+ void (*IFB_MICTxRtn)( hcf_32*, hcf_32 );
-+ hcf_16 IFB_rx_tlen;
-+ hcf_16 IFB_tx_tlen;
-+ hcf_8 IFB_rx_32[4];
-+ hcf_8 IFB_tx_32[4];
-+ hcf_16 IFB_RscInd;
-+ hcf_16 IFB_MB_FID;
-+ hcf_16 IFB_DLTarget[2];
-+
-+ hcf_16 IFB_DLPage;
-+ hcf_16 IFB_DLOffset;
-+ hcf_16 IFB_DLLen;
-+
-+ hcf_16 volatile IFB_IntOffCnt;
-+ hcf_16 IFB_IntEnMask;
-+
-+ CFG_FW_IDENTITY_STRCT IFB_FWIdentity;
-+ hcf_16 IFB_Tally;
-+ hcf_16 IFB_TallyTyp;
-+
-+ CFG_HERMES_TALLIES_STRCT IFB_NIC_Tallies;
-+ CFG_HCF_TALLIES_STRCT IFB_HCF_Tallies;
-+
-+ void *IFB_MSFSup;
-+} IFB_STRCT;
-+
-+typedef IFB_STRCT* IFBP;
-+
-+struct uilreq
-+{
-+ union
-+ {
-+ char ifrn_name[16];
-+ } ifr_ifrn;
-+
-+ IFBP hcfCtx;
-+ __u8 command;
-+ __u8 result;
-+ __u16 len;
-+ void *data;
-+};
-+
-+typedef struct
-+{
-+ hcf_16 len;
-+ hcf_16 typ;
-+ union
-+ {
-+ hcf_8 u8[(512 - (sizeof(hcf_16) * 2)) / sizeof(hcf_8)];
-+ hcf_16 u16[(512 - (sizeof(hcf_16) * 2)) / sizeof(hcf_16)];
-+ hcf_32 u32[(512 - (sizeof(hcf_16) * 2)) / sizeof(hcf_32)];
-+ } u;
-+} ltv_t;
-+
-+
-+#define UIL_FUN_CONNECT 0x00
-+#define UIL_FUN_DISCONNECT 0x01
-+#define UIL_FUN_GET_INFO 0x04
-+#define UIL_FUN_PUT_INFO 0x05
-+
-+#define GENERIC_INFO_ELEM 0xdd
-+#define RSN_INFO_ELEM 0x30
-+
-+#define CFG_DRIVER_ENABLE 0x0902
-+#define CFG_CNF_ENCRYPTION 0xFC20
-+#define CFG_ADD_TKIP_DEFAULT_KEY 0xFCB4
-+#define CFG_SET_WPA_AUTH_KEY_MGMT_SUITE 0xFCB5
-+#define CFG_REMOVE_TKIP_DEFAULT_KEY 0xFCB6
-+#define CFG_ADD_TKIP_MAPPED_KEY 0xFCB7
-+#define CFG_REMOVE_TKIP_MAPPED_KEY 0xFCB8
-+#define CFG_FW_IDENTITY 0xFD20
-+#define CFG_CNF_EXCL_UNENCRYPTED 0xFC22
-+
-+#define HCF_SUCCESS 0x00
-+#define UIL_SUCCESS 0x00
-+
-+#define COMP_ID_FW_STA 31
-+#define COMP_ID_FW_AP 32
-+
-+#define WVLAN2_IOCTL_UIL SIOCDEVPRIVATE
-+
-+#endif
+++ /dev/null
-diff -Nur wpa_supplicant-0.4.7/defconfig wpa_supplicant-0.4.7.new/defconfig
---- wpa_supplicant-0.4.7/defconfig 2005-09-24 20:30:43.000000000 +0200
-+++ wpa_supplicant-0.4.7.new/defconfig 2005-12-26 19:18:14.000000000 +0100
-@@ -68,6 +68,9 @@
- # Driver interface for Intel ipw2100/2200 driver
- #CONFIG_DRIVER_IPW=y
-
-+# Driver interface for Zydas zd1211 driver
-+#CONFIG_DRIVER_ZD1211=y
-+
- # Driver interface for generic Linux wireless extensions
- CONFIG_DRIVER_WEXT=y
-
-diff -Nur wpa_supplicant-0.4.7/drivers.c wpa_supplicant-0.4.7.new/drivers.c
---- wpa_supplicant-0.4.7/drivers.c 2005-02-20 01:15:54.000000000 +0100
-+++ wpa_supplicant-0.4.7.new/drivers.c 2005-12-26 19:19:16.000000000 +0100
-@@ -55,6 +55,9 @@
- #ifdef CONFIG_DRIVER_TEST
- extern struct wpa_driver_ops wpa_driver_test_ops; /* driver_test.c */
- #endif /* CONFIG_DRIVER_TEST */
-+#ifdef CONFIG_DRIVER_ZD1211
-+extern struct wpa_driver_ops wpa_driver_zd1211_ops; /* driver_zd1211.c */
-+#endif /* CONFIG_DRIVER_ZD1211 */
-
-
- struct wpa_driver_ops *wpa_supplicant_drivers[] =
-@@ -98,5 +101,8 @@
- #ifdef CONFIG_DRIVER_TEST
- &wpa_driver_test_ops,
- #endif /* CONFIG_DRIVER_TEST */
-+#ifdef CONFIG_DRIVER_ZD1211
-+ &wpa_driver_zd1211_ops,
-+#endif /* CONFIG_DRIVER_ZD1211 */
- NULL
- };
-diff -Nur wpa_supplicant-0.4.7/driver_zd1211.c wpa_supplicant-0.4.7.new/driver_zd1211.c
---- wpa_supplicant-0.4.7/driver_zd1211.c 1970-01-01 01:00:00.000000000 +0100
-+++ wpa_supplicant-0.4.7.new/driver_zd1211.c 2005-12-27 16:28:46.000000000 +0100
-@@ -0,0 +1,408 @@
-+#include <stdlib.h>
-+#include <stdio.h>
-+#include <unistd.h>
-+#include <string.h>
-+#include <sys/ioctl.h>
-+#include <errno.h>
-+
-+#include "common.h"
-+#include "driver.h"
-+#include "driver_wext.h"
-+#include "eloop.h"
-+#include "wireless_copy.h"
-+#include "wpa_supplicant.h"
-+
-+#include "zd1211_common.h"
-+
-+
-+struct wpa_driver_zd1211_data {
-+ void *ctx;
-+ void *wext; /* private data for driver_wext */
-+ char ifname[IFNAMSIZ + 1];
-+ int sock;
-+};
-+
-+
-+static int zd1211_ioctl(struct wpa_driver_zd1211_data *zd1211_drv, struct zd1211_wlan_param *param, int len, int show_err) {
-+ struct iwreq iwr;
-+
-+ memset(&iwr, 0, sizeof(iwr));
-+ strncpy(iwr.ifr_name, zd1211_drv->ifname, IFNAMSIZ);
-+ iwr.u.data.pointer = (caddr_t) param;
-+ iwr.u.data.length = len;
-+
-+ if (ioctl(zd1211_drv->sock, ZD_IOCTL_WPA, &iwr) < 0) {
-+ int ret;
-+
-+ ret = errno;
-+ if (show_err)
-+ perror("ioctl[ZD_IOCTL_WPA]");
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+
-+static int zd1211_set_param(struct wpa_driver_zd1211_data *zd1211_drv, int op, int arg, int show_err) {
-+ struct iwreq iwr;
-+ int *i, ret = 0;
-+
-+ memset(&iwr, 0, sizeof(iwr));
-+ strncpy(iwr.ifr_name, zd1211_drv->ifname, IFNAMSIZ);
-+ i = (int *) iwr.u.name;
-+ *i++ = op;
-+ *i++ = arg;
-+
-+ if (ioctl(zd1211_drv->sock, ZD_IOCTL_PARAM, &iwr) < 0) {
-+ perror("ioctl[ZD_IOCTL_PARAM]");
-+ ret = -1;
-+ }
-+
-+ return ret;
-+}
-+
-+
-+static int wpa_driver_zd1211_get_scan_results(void *priv, struct wpa_scan_result *results, size_t max_size) {
-+ struct wpa_driver_zd1211_data *zd1211_drv;
-+
-+ zd1211_drv = priv;
-+ return wpa_driver_wext_get_scan_results(zd1211_drv->wext, results, max_size);
-+}
-+
-+
-+static int wpa_driver_zd1211_get_bssid(void *priv, u8 *bssid) {
-+ struct wpa_driver_zd1211_data *zd1211_drv;
-+
-+ zd1211_drv = priv;
-+ return wpa_driver_wext_get_bssid(zd1211_drv->wext, bssid);
-+}
-+
-+
-+static int wpa_driver_zd1211_get_ssid(void *priv, u8 *ssid) {
-+ struct wpa_driver_zd1211_data *zd1211_drv;
-+
-+ zd1211_drv = priv;
-+ return wpa_driver_wext_get_ssid(zd1211_drv->wext, ssid);
-+}
-+
-+
-+static int wpa_driver_zd1211_set_auth_alg(void *priv, int auth_alg) {
-+ struct wpa_driver_zd1211_data *zd1211_drv = priv;
-+ int algs = 0;
-+
-+ if (auth_alg & AUTH_ALG_OPEN_SYSTEM)
-+ algs = 0;
-+ if (auth_alg & AUTH_ALG_SHARED_KEY)
-+ algs = 1;
-+
-+ return zd1211_set_param(zd1211_drv, ZD_PARAM_AUTH_ALGS, algs, 1);
-+}
-+
-+
-+static int wpa_driver_zd1211_set_countermeasures(void *priv, int enabled) {
-+ struct wpa_driver_zd1211_data *zd1211_drv = priv;
-+
-+ /* Enable the countermeasure */
-+ wpa_printf(MSG_DEBUG, "%s: enabled=%d", __FUNCTION__, enabled);
-+ return zd1211_set_param(zd1211_drv, ZD_PARAM_COUNTERMEASURES, enabled, 1);
-+}
-+
-+
-+static int wpa_driver_zd1211_set_drop_unencrypted(void *priv, int enabled) {
-+ struct wpa_driver_zd1211_data *zd1211_drv = priv;
-+
-+ /* Enable the countermeasure */
-+ wpa_printf(MSG_DEBUG, "%s: enabled=%d", __FUNCTION__, enabled);
-+ return zd1211_set_param(zd1211_drv, ZD_PARAM_DROPUNENCRYPTED, enabled, 1);
-+}
-+
-+
-+static int wpa_driver_zd1211_set_key(void *priv, wpa_alg alg,
-+ const u8 *addr, int key_idx,
-+ int set_tx, const u8 *seq, size_t seq_len,
-+ const u8 *key, size_t key_len) {
-+ struct wpa_driver_zd1211_data *zd1211_drv = priv;
-+ struct zd1211_wlan_param *param;
-+ u8 *buf;
-+ size_t blen;
-+ int ret = 0;
-+ char *alg_name;
-+
-+ switch (alg) {
-+ case WPA_ALG_NONE:
-+ alg_name = "NONE";
-+ break;
-+ case WPA_ALG_WEP:
-+ alg_name = "WEP";
-+ break;
-+ case WPA_ALG_TKIP:
-+ alg_name = "TKIP";
-+ break;
-+ case WPA_ALG_CCMP:
-+ alg_name = "CCMP";
-+ break;
-+ default:
-+ return -1;
-+ }
-+
-+ wpa_printf(MSG_DEBUG, "%s: alg=%s key_idx=%d set_tx=%d seq_len=%d "
-+ "key_len=%d", __FUNCTION__, alg_name, key_idx, set_tx,
-+ seq_len, key_len);
-+
-+ if (seq_len > 8)
-+ return -2;
-+
-+ blen = sizeof(*param) + key_len;
-+ buf = malloc(blen);
-+ if (buf == NULL)
-+ return -1;
-+ memset(buf, 0, blen);
-+
-+ param = (struct zd1211_wlan_param *) buf;
-+ param->cmd = ZD_CMD_SET_ENCRYPT_KEY;
-+ /* TODO: In theory, STA in client mode can use five keys; four default
-+ * keys for receiving (with keyidx 0..3) and one individual key for
-+ * both transmitting and receiving (keyidx 0) _unicast_ packets. Now,
-+ * keyidx 0 is reserved for this unicast use and default keys can only
-+ * use keyidx 1..3 (i.e., default key with keyidx 0 is not supported).
-+ * This should be fine for more or less all cases, but for completeness
-+ * sake, the driver could be enhanced to support the missing key. */
-+#if 0
-+ if (addr == NULL)
-+ memset(param->sta_addr, 0xff, ETH_ALEN);
-+ else
-+ memcpy(param->sta_addr, addr, ETH_ALEN);
-+#else
-+ memset(param->sta_addr, 0xff, ETH_ALEN);
-+#endif
-+ strncpy(param->u.crypt.alg, alg_name, ZD_CRYPT_ALG_NAME_LEN);
-+ param->u.crypt.flags = set_tx ? ZD_FLAG_SET_TX_KEY : 0;
-+ param->u.crypt.idx = key_idx;
-+ memcpy(param->u.crypt.seq, seq, seq_len);
-+ param->u.crypt.key_len = key_len;
-+ memcpy((u8 *) param->u.crypt.key, key, key_len);
-+
-+ /* Dump key context */
-+ if(alg == WPA_ALG_TKIP) {
-+ int ii;
-+
-+ wpa_printf(MSG_DEBUG, "Key Context:");
-+ for(ii = 0; ii < key_len; ) {
-+ printf("0x%02x ", key[ii]);
-+
-+ if((++ii % 16) == 0)
-+ printf("\n");
-+ }
-+
-+ printf("\n");
-+ }
-+
-+ if (zd1211_ioctl(zd1211_drv, param, blen, 1)) {
-+ wpa_printf(MSG_WARNING, "Failed to set encryption.");
-+ //show_set_key_error(param);
-+ ret = -1;
-+ }
-+ free(buf);
-+
-+ return ret;
-+}
-+
-+
-+static int wpa_driver_zd1211_set_wpa_ie(struct wpa_driver_zd1211_data *zd1211_drv, const u8 *wpa_ie, size_t wpa_ie_len) {
-+ int res;
-+ struct zd1211_wlan_param *param;
-+ size_t blen = ZD_GENERIC_ELEMENT_HDR_LEN + wpa_ie_len;
-+
-+ if (blen < sizeof(*param))
-+ blen = sizeof(*param);
-+
-+ param = (struct zd1211_wlan_param *) malloc(blen);
-+ if (param == NULL)
-+ return -1;
-+
-+ memset(param, 0, blen);
-+ param->cmd = ZD_CMD_SET_GENERIC_ELEMENT;
-+ param->u.generic_elem.len = wpa_ie_len;
-+ memcpy(param->u.generic_elem.data, wpa_ie, wpa_ie_len);
-+ res = zd1211_ioctl(zd1211_drv, param, blen, 1);
-+
-+ free(param);
-+
-+ return res;
-+}
-+
-+
-+static int wpa_driver_zd1211_set_wpa(void *priv, int enabled) {
-+ struct wpa_driver_zd1211_data *zd1211_drv = priv;
-+ int ret = 0;
-+
-+ wpa_printf(MSG_DEBUG, "%s: enabled=%d", __FUNCTION__, enabled);
-+
-+ if (!enabled && wpa_driver_zd1211_set_wpa_ie(zd1211_drv, NULL, 0) < 0)
-+ ret = -1;
-+ if (zd1211_set_param(zd1211_drv, ZD_PARAM_ROAMING, enabled, 1) < 0)
-+ ret = -1;
-+ if (zd1211_set_param(zd1211_drv, ZD_PARAM_PRIVACY, enabled, 1) < 0)
-+ ret = -1;
-+ if (zd1211_set_param(zd1211_drv, ZD_PARAM_WPA, enabled, 1) < 0)
-+ ret = -1;
-+
-+ return ret;
-+}
-+
-+
-+static int wpa_driver_zd1211_associate(void *priv, struct wpa_driver_associate_params *params) {
-+ struct wpa_driver_zd1211_data *zd1211_drv = priv;
-+ int ret = 0;
-+
-+ wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);
-+
-+ /* Because there might be the case, two or more APs with the same
-+ * SSID, in order to identify them, we need to set the BSSID. */
-+ if (wpa_driver_zd1211_set_wpa_ie(zd1211_drv, params->wpa_ie, params->wpa_ie_len) < 0)
-+ ret = -1;
-+ if (wpa_driver_wext_set_ssid(zd1211_drv->wext, params->ssid, params->ssid_len) < 0)
-+ ret = -1;
-+
-+ // Mark for test
-+ //if (wpa_driver_wext_set_bssid(ifname, bssid) < 0)
-+ // ret = -1;
-+
-+#if 0
-+ /* Allow unencrypted EAPOL messages even if pairwise keys are set when
-+ * not using WPA. IEEE 802.1X specifies that these frames are not
-+ * encrypted, but WPA encrypts them when pairwise keys are in use. */
-+ if (key_mgmt_suite == KEY_MGMT_802_1X ||
-+ key_mgmt_suite == KEY_MGMT_PSK)
-+ allow_unencrypted_eapol = 0;
-+ else
-+ allow_unencrypted_eapol = 1;
-+
-+ if (prism2param(ifname, PRISM2_PARAM_IEEE_802_1X,
-+ allow_unencrypted_eapol) < 0) {
-+ wpa_printf(MSG_DEBUG, "hostap: Failed to configure "
-+ "ieee_802_1x param");
-+ /* Ignore this error.. driver_hostap.c can also be used with
-+ * other drivers that do not support this prism2_param. */
-+ }
-+#endif
-+
-+ return ret;
-+}
-+
-+
-+static int wpa_driver_zd1211_deauthenticate(void *priv, const u8 *addr, int reason_code) {
-+ struct zd1211_wlan_param *param;
-+ struct wpa_driver_zd1211_data *zd1211_drv = priv;
-+ int blen;
-+ int ret;
-+
-+ wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);
-+
-+ blen = sizeof(*param);
-+ param = (struct zd1211_wlan_param *) malloc(blen);
-+ if (param == NULL)
-+ return -1;
-+
-+ memset(param, 0, blen);
-+ param->cmd = ZD_CMD_SET_MLME;
-+ param->u.mlme.cmd = MLME_STA_DEAUTH;
-+ param->u.mlme.reason_code = reason_code;
-+ memcpy(param->sta_addr, addr, ETH_ALEN);
-+ ret = zd1211_ioctl(zd1211_drv, param, blen, 1);
-+ usleep(100000);
-+ free(param);
-+ return ret;
-+}
-+
-+
-+static int wpa_driver_zd1211_disassociate(void *priv, const u8 *addr, int reason_code) {
-+ struct zd1211_wlan_param *param;
-+ struct wpa_driver_zd1211_data *zd1211_drv = priv;
-+ int blen;
-+ int ret;
-+
-+ wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);
-+
-+ blen = sizeof(*param);
-+ param = (struct zd1211_wlan_param *) malloc(blen);
-+ if (param == NULL)
-+ return -1;
-+
-+ memset(param, 0, blen);
-+ param->cmd = ZD_CMD_SET_MLME;
-+ param->u.mlme.cmd = MLME_STA_DISASSOC;
-+ param->u.mlme.reason_code = reason_code;
-+ memcpy(param->sta_addr, addr, ETH_ALEN);
-+ ret = zd1211_ioctl(zd1211_drv, param, blen, 1);
-+ free(param);
-+ return ret;
-+}
-+
-+
-+static int wpa_driver_zd1211_scan(void *priv, const u8 *ssid, size_t ssid_len) {
-+ struct wpa_driver_zd1211_data *zd1211_drv;
-+
-+ zd1211_drv = priv;
-+ return wpa_driver_wext_scan(zd1211_drv->wext, ssid, ssid_len);
-+}
-+
-+
-+static void * wpa_driver_zd1211_init(void *ctx, const char *ifname) {
-+ struct wpa_driver_zd1211_data *zd1211_drv;
-+
-+ zd1211_drv = malloc(sizeof(*zd1211_drv));
-+ if (zd1211_drv == NULL)
-+ return NULL;
-+ memset(zd1211_drv, 0, sizeof(*zd1211_drv));
-+
-+ zd1211_drv->wext = wpa_driver_wext_init(ctx, ifname);
-+ if (zd1211_drv->wext == NULL)
-+ goto exit_no_wext;
-+
-+ zd1211_drv->ctx = ctx;
-+ strncpy(zd1211_drv->ifname, ifname, sizeof(zd1211_drv->ifname));
-+
-+ zd1211_drv->sock = socket(PF_INET, SOCK_DGRAM, 0);
-+ if (zd1211_drv->sock < 0)
-+ goto exit_no_socket;
-+
-+ return zd1211_drv;
-+
-+exit_no_socket:
-+ wpa_driver_wext_deinit(zd1211_drv->wext);
-+exit_no_wext:
-+ free(zd1211_drv);
-+ return NULL;
-+}
-+
-+
-+static void wpa_driver_zd1211_deinit(void *ctx) {
-+ struct wpa_driver_zd1211_data *zd1211_drv = ctx;
-+
-+ wpa_driver_wext_deinit(zd1211_drv->wext);
-+ close(zd1211_drv->sock);
-+ free(zd1211_drv);
-+}
-+
-+
-+struct wpa_driver_ops wpa_driver_zd1211_ops = {
-+ .name = "zd1211",
-+ .desc = "Zydas zd1211 drivers",
-+ .init = wpa_driver_zd1211_init,
-+ .deinit = wpa_driver_zd1211_deinit,
-+ .associate = wpa_driver_zd1211_associate,
-+ .deauthenticate = wpa_driver_zd1211_deauthenticate,
-+ .disassociate = wpa_driver_zd1211_disassociate,
-+ .get_bssid = wpa_driver_zd1211_get_bssid,
-+ .get_scan_results = wpa_driver_zd1211_get_scan_results,
-+ .get_ssid = wpa_driver_zd1211_get_ssid,
-+// .get_capa = wpa_driver_zd1211_get_capa,
-+ .scan = wpa_driver_zd1211_scan,
-+ .set_auth_alg = wpa_driver_zd1211_set_auth_alg,
-+ .set_countermeasures = wpa_driver_zd1211_set_countermeasures,
-+ .set_drop_unencrypted = wpa_driver_zd1211_set_drop_unencrypted,
-+ .set_key = wpa_driver_zd1211_set_key,
-+ .set_wpa = wpa_driver_zd1211_set_wpa,
-+};
-diff -Nur wpa_supplicant-0.4.7/Makefile wpa_supplicant-0.4.7.new/Makefile
---- wpa_supplicant-0.4.7/Makefile 2005-11-21 02:42:12.000000000 +0100
-+++ wpa_supplicant-0.4.7.new/Makefile 2005-12-26 19:17:14.000000000 +0100
-@@ -107,6 +107,12 @@
- CONFIG_WIRELESS_EXTENSION=y
- endif
-
-+ifdef CONFIG_DRIVER_ZD1211
-+CFLAGS += -DCONFIG_DRIVER_ZD1211
-+OBJS_d += driver_zd1211.o
-+CONFIG_WIRELESS_EXTENSION=y
-+endif
-+
- ifdef CONFIG_DRIVER_BSD
- CFLAGS += -DCONFIG_DRIVER_BSD
- OBJS_d += driver_bsd.o
-diff -Nur wpa_supplicant-0.4.7/zd1211_common.h wpa_supplicant-0.4.7.new/zd1211_common.h
---- wpa_supplicant-0.4.7/zd1211_common.h 1970-01-01 01:00:00.000000000 +0100
-+++ wpa_supplicant-0.4.7.new/zd1211_common.h 2005-12-27 16:00:36.000000000 +0100
-@@ -0,0 +1,68 @@
-+#ifndef ZD1211_COMMON_H
-+#define ZD1211_COMMON_H
-+
-+
-+#define ZD_IOCTL_WPA (SIOCDEVPRIVATE + 1)
-+#define ZD_IOCTL_PARAM (SIOCDEVPRIVATE + 2)
-+
-+#define ZD_PARAM_ROAMING 0x0001
-+#define ZD_PARAM_PRIVACY 0x0002
-+#define ZD_PARAM_WPA 0x0003
-+#define ZD_PARAM_COUNTERMEASURES 0x0004
-+#define ZD_PARAM_DROPUNENCRYPTED 0x0005
-+#define ZD_PARAM_AUTH_ALGS 0x0006
-+
-+#define ZD_CMD_SET_ENCRYPT_KEY 0x0001
-+#define ZD_CMD_SET_MLME 0x0002
-+//#define ZD_CMD_SCAN_REQ 0x0003
-+#define ZD_CMD_SET_GENERIC_ELEMENT 0x0004
-+
-+#define ZD_FLAG_SET_TX_KEY 0x0001
-+
-+#define ZD_GENERIC_ELEMENT_HDR_LEN \
-+((int) (&((struct zd1211_wlan_param *) 0)->u.generic_elem.data))
-+
-+#define ZD_CRYPT_ALG_NAME_LEN 16
-+#define ZD_MAX_KEY_SIZE 32
-+#define ZD_MAX_GENERIC_SIZE 64
-+
-+/* structure definition */
-+
-+struct zd1211_wlan_param {
-+ u32 cmd;
-+ u8 sta_addr[ETH_ALEN];
-+ union {
-+ struct {
-+ u8 alg[ZD_CRYPT_ALG_NAME_LEN];
-+ u32 flags;
-+ u32 err;
-+ u8 idx;
-+ u8 seq[8]; /* sequence counter (set: RX, get: TX) */
-+ u16 key_len;
-+ u8 key[ZD_MAX_KEY_SIZE];
-+ } crypt;
-+/*
-+ struct {
-+ u32 flags_and;
-+ u32 flags_or;
-+ } set_flags_sta;
-+*/
-+ struct {
-+ u8 len;
-+ u8 data[ZD_MAX_GENERIC_SIZE];
-+ } generic_elem;
-+ struct {
-+#define MLME_STA_DEAUTH 0
-+#define MLME_STA_DISASSOC 1
-+ u16 cmd;
-+ u16 reason_code;
-+ } mlme;
-+ struct {
-+ u8 ssid_len;
-+ u8 ssid[32];
-+ } scan_req;
-+ } u;
-+};
-+
-+
-+#endif
+++ /dev/null
---- driver_madwifi.c.orig 2005-03-18 15:12:53.392793216 +0100
-+++ driver_madwifi.c 2005-03-18 15:13:09.246383104 +0100
-@@ -25,7 +25,8 @@
- #include "eloop.h"
- #include "wpa_supplicant.h"
-
--#include <include/compat.h>
-+#include <net80211/compat.h>
-+#include <net80211/_ieee80211.h>
- #include <net80211/ieee80211.h>
- #include <net80211/ieee80211_crypto.h>
- #include <net80211/ieee80211_ioctl.h>
+++ /dev/null
-##### Example wpa_supplicant configuration file ###############################
-# Empty lines and lines starting with # are ignored
-
-# NOTE! This file may contain password information and should probably be made
-# readable only by root user on multiuser systems.
-
-# global configuration (shared by all network blocks)
-#
-# Interface for separate control program. If this is specified, wpa_supplicant
-# will create this directory and a UNIX domain socket for listening to requests
-# from external programs (CLI/GUI, etc.) for status information and
-# configuration. The socket file will be named based on the interface name, so
-# multiple wpa_supplicant processes can be run at the same time if more than
-# one interface is used.
-# /var/run/wpa_supplicant is the recommended directory for sockets and by
-# default, wpa_cli will use it when trying to connect with wpa_supplicant.
-ctrl_interface=/var/run/wpa_supplicant
-
-# Access control for the control interface can be configured by setting the
-# directory to allow only members of a group to use sockets. This way, it is
-# possible to run wpa_supplicant as root (since it needs to change network
-# configuration and open raw sockets) and still allow GUI/CLI components to be
-# run as non-root users. However, since the control interface can be used to
-# change the network configuration, this access needs to be protected in many
-# cases. By default, wpa_supplicant is configured to use gid 0 (root). If you
-# want to allow non-root users to use the control interface, add a new group
-# and change this value to match with that group. Add users that should have
-# control interface access to this group. If this variable is commented out or
-# not included in the configuration file, group will not be changed from the
-# value it got by default when the directory or socket was created.
-#
-# This variable can be a group name or gid.
-#ctrl_interface_group=wheel
-ctrl_interface_group=0
-
-# IEEE 802.1X/EAPOL version
-# wpa_supplicant was implemented based on IEEE 802-1X-REV-d8 which defines
-# EAPOL version 2. However, there are many APs that do not handle the new
-# version number correctly (they seem to drop the frames completely). In order
-# to make wpa_supplicant interoperate with these APs, the version number is set
-# to 1 by default. This configuration value can be used to set it to the new
-# version (2).
-eapol_version=1
-
-# AP scanning/selection
-# By default, wpa_supplicant requests driver to perform AP scanning and then
-# uses the scan results to select a suitable AP. Another alternative is to
-# allow the driver to take care of AP scanning and selection and use
-# wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association
-# information from the driver.
-# 1: wpa_supplicant initiates scanning and AP selection
-# 0: driver takes care of scanning, AP selection, and IEEE 802.11 association
-# parameters (e.g., WPA IE generation); this mode can also be used with
-# non-WPA drivers when using IEEE 802.1X mode; do not try to associate with
-# APs (i.e., external program needs to control association)
-# 2: like 0, but associate with APs using security policy and SSID (but not
-# BSSID); this can be used, e.g., with ndiswrapper and NDIS driver to
-# enable operation with hidden SSIDs and optimized roaming; in this mode,
-# only the first network block in the configuration file is used and this
-# configuration should have explicit security policy (i.e., only one option
-# in the lists) for key_mgmt, pairwise, group, proto variables
-ap_scan=1
-
-# EAP fast re-authentication
-# By default, fast re-authentication is enabled for all EAP methods that
-# support it. This variable can be used to disable fast re-authentication.
-# Normally, there is no need to disable this.
-fast_reauth=1
-
-# network block
-#
-# Each network (usually AP's sharing the same SSID) is configured as a separate
-# block in this configuration file. The network blocks are in preference order
-# (the first match is used).
-#
-# network block fields:
-#
-# ssid: SSID (mandatory); either as an ASCII string with double quotation or
-# as hex string; network name
-#
-# scan_ssid:
-# 0 = do not scan this SSID with specific Probe Request frames (default)
-# 1 = scan with SSID-specific Probe Request frames (this can be used to
-# find APs that do not accept broadcast SSID or use multiple SSIDs;
-# this will add latency to scanning, so enable this only when needed)
-#
-# bssid: BSSID (optional); if set, this network block is used only when
-# associating with the AP using the configured BSSID
-#
-# priority: priority group (integer)
-# By default, all networks will get same priority group (0). If some of the
-# networks are more desirable, this field can be used to change the order in
-# which wpa_supplicant goes through the networks when selecting a BSS. The
-# priority groups will be iterated in decreasing priority (i.e., the larger the
-# priority value, the sooner the network is matched against the scan results).
-# Within each priority group, networks will be selected based on security
-# policy, signal strength, etc.
-# Please note that AP scanning with scan_ssid=1 is not using this priority to
-# select the order for scanning. Instead, it uses the order the networks are in
-# the configuration file.
-#
-# mode: IEEE 802.11 operation mode
-# 0 = infrastructure (Managed) mode, i.e., associate with an AP (default)
-# 1 = IBSS (ad-hoc, peer-to-peer)
-# Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP)
-# and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). In addition, ap_scan has
-# to be set to 2 for IBSS. WPA-None requires following network block options:
-# proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not
-# both), and psk must also be set.
-#
-# proto: list of accepted protocols
-# WPA = WPA/IEEE 802.11i/D3.0
-# RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN)
-# If not set, this defaults to: WPA RSN
-#
-# key_mgmt: list of accepted authenticated key management protocols
-# WPA-PSK = WPA pre-shared key (this requires 'psk' field)
-# WPA-EAP = WPA using EAP authentication (this can use an external
-# program, e.g., Xsupplicant, for IEEE 802.1X EAP Authentication
-# IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically
-# generated WEP keys
-# NONE = WPA is not used; plaintext or static WEP could be used
-# If not set, this defaults to: WPA-PSK WPA-EAP
-#
-# auth_alg: list of allowed IEEE 802.11 authentication algorithms
-# OPEN = Open System authentication (required for WPA/WPA2)
-# SHARED = Shared Key authentication (requires static WEP keys)
-# LEAP = LEAP/Network EAP (only used with LEAP)
-# If not set, automatic selection is used (Open System with LEAP enabled if
-# LEAP is allowed as one of the EAP methods).
-#
-# pairwise: list of accepted pairwise (unicast) ciphers for WPA
-# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
-# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
-# NONE = Use only Group Keys (deprecated, should not be included if APs support
-# pairwise keys)
-# If not set, this defaults to: CCMP TKIP
-#
-# group: list of accepted group (broadcast/multicast) ciphers for WPA
-# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
-# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
-# WEP104 = WEP (Wired Equivalent Privacy) with 104-bit key
-# WEP40 = WEP (Wired Equivalent Privacy) with 40-bit key [IEEE 802.11]
-# If not set, this defaults to: CCMP TKIP WEP104 WEP40
-#
-# psk: WPA preshared key; 256-bit pre-shared key
-# The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e.,
-# 32 bytes or as an ASCII passphrase (in which case, the real PSK will be
-# generated using the passphrase and SSID). ASCII passphrase must be between
-# 8 and 63 characters (inclusive).
-# This field is not needed, if WPA-EAP is used.
-# Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys
-# from ASCII passphrase. This process uses lot of CPU and wpa_supplicant
-# startup and reconfiguration time can be optimized by generating the PSK only
-# only when the passphrase or SSID has actually changed.
-#
-# eapol_flags: IEEE 802.1X/EAPOL options (bit field)
-# Dynamic WEP key require for non-WPA mode
-# bit0 (1): require dynamically generated unicast WEP key
-# bit1 (2): require dynamically generated broadcast WEP key
-# (3 = require both keys; default)
-#
-# Following fields are only used with internal EAP implementation.
-# eap: space-separated list of accepted EAP methods
-# MD5 = EAP-MD5 (unsecure and does not generate keying material ->
-# cannot be used with WPA; to be used as a Phase 2 method
-# with EAP-PEAP or EAP-TTLS)
-# MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used
-# as a Phase 2 method with EAP-PEAP or EAP-TTLS)
-# OTP = EAP-OTP (cannot be used separately with WPA; to be used
-# as a Phase 2 method with EAP-PEAP or EAP-TTLS)
-# GTC = EAP-GTC (cannot be used separately with WPA; to be used
-# as a Phase 2 method with EAP-PEAP or EAP-TTLS)
-# TLS = EAP-TLS (client and server certificate)
-# PEAP = EAP-PEAP (with tunnelled EAP authentication)
-# TTLS = EAP-TTLS (with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2
-# authentication)
-# If not set, all compiled in methods are allowed.
-#
-# identity: Identity string for EAP
-# anonymous_identity: Anonymous identity string for EAP (to be used as the
-# unencrypted identity with EAP types that support different tunnelled
-# identity, e.g., EAP-TTLS)
-# password: Password string for EAP
-# ca_cert: File path to CA certificate file. This file can have one or more
-# trusted CA certificates. If ca_cert is not included, server certificate
-# will not be verified. This is insecure and the CA file should always be
-# configured.
-# client_cert: File path to client certificate file (PEM/DER)
-# private_key: File path to client private key file (PEM/DER/PFX)
-# When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be
-# commented out. Both the private key and certificate will be read from
-# the PKCS#12 file in this case.
-# private_key_passwd: Password for private key file
-# dh_file: File path to DH/DSA parameters file (in PEM format)
-# This is an optional configuration file for setting parameters for an
-# ephemeral DH key exchange. In most cases, the default RSA
-# authentication does not use this configuration. However, it is possible
-# setup RSA to use ephemeral DH key exchange. In addition, ciphers with
-# DSA keys always use ephemeral DH keys. This can be used to achieve
-# forward secrecy. If the file is in DSA parameters format, it will be
-# automatically converted into DH params.
-# subject_match: Substring to be matched against the subject of the
-# authentication server certificate. If this string is set, the server
-# sertificate is only accepted if it contains this string in the subject.
-# The subject string is in following format:
-# /C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com
-# phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters
-# (string with field-value pairs, e.g., "peapver=0" or
-# "peapver=1 peaplabel=1")
-# 'peapver' can be used to force which PEAP version (0 or 1) is used.
-# 'peaplabel=1' can be used to force new label, "client PEAP encryption",
-# to be used during key derivation when PEAPv1 or newer. Most existing
-# PEAPv1 implementation seem to be using the old label, "client EAP
-# encryption", and wpa_supplicant is now using that as the default value.
-# Some servers, e.g., Radiator, may require peaplabel=1 configuration to
-# interoperate with PEAPv1; see eap_testing.txt for more details.
-# 'peap_outer_success=0' can be used to terminate PEAP authentication on
-# tunneled EAP-Success. This is required with some RADIUS servers that
-# implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g.,
-# Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode)
-# sim_min_num_chal=3 can be used to configure EAP-SIM to require three
-# challenges (by default, it accepts 2 or 3)
-# phase2: Phase2 (inner authentication with TLS tunnel) parameters
-# (string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or
-# "autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS)
-# Following certificate/private key fields are used in inner Phase2
-# authentication when using EAP-TTLS or EAP-PEAP.
-# ca_cert2: File path to CA certificate file. This file can have one or more
-# trusted CA certificates. If ca_cert2 is not included, server
-# certificate will not be verified. This is insecure and the CA file
-# should always be configured.
-# client_cert2: File path to client certificate file
-# private_key2: File path to client private key file
-# private_key2_passwd: Password for private key file
-# dh_file2: File path to DH/DSA parameters file (in PEM format)
-# subject_match2: Substring to be matched against the subject of the
-# authentication server certificate.
-#
-# EAP-PSK variables:
-# eappsk: 16-byte (128-bit, 32 hex digits) pre-shared key in hex format
-# nai: user NAI
-# server_nai: authentication server NAI
-#
-# EAP-FAST variables:
-# pac_file: File path for the PAC entries. wpa_supplicant will need to be able
-# to create this file and write updates to it when PAC is being
-# provisioned or refreshed.
-# phase1: fast_provisioning=1 option enables in-line provisioning of EAP-FAST
-# credentials (PAC)
-#
-# wpa_supplicant supports number of "EAP workarounds" to work around
-# interoperability issues with incorrectly behaving authentication servers.
-# These are enabled by default because some of the issues are present in large
-# number of authentication servers. Strict EAP conformance mode can be
-# configured by disabling workarounds with eap_workaround=0.
-
-# Example blocks:
-
-# Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers
-network={
- ssid="simple"
- psk="very secret passphrase"
- priority=5
-}
-
-# Same as previous, but request SSID-specific scanning (for APs that reject
-# broadcast SSID)
-network={
- ssid="second ssid"
- scan_ssid=1
- psk="very secret passphrase"
- priority=2
-}
-
-# Only WPA-PSK is used. Any valid cipher combination is accepted.
-network={
- ssid="example"
- proto=WPA
- key_mgmt=WPA-PSK
- pairwise=CCMP TKIP
- group=CCMP TKIP WEP104 WEP40
- psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
- priority=2
-}
-
-# Only WPA-EAP is used. Both CCMP and TKIP is accepted. An AP that used WEP104
-# or WEP40 as the group cipher will not be accepted.
-network={
- ssid="example"
- proto=RSN
- key_mgmt=WPA-EAP
- pairwise=CCMP TKIP
- group=CCMP TKIP
- eap=TLS
- identity="user@example.com"
- ca_cert="/etc/cert/ca.pem"
- client_cert="/etc/cert/user.pem"
- private_key="/etc/cert/user.prv"
- private_key_passwd="password"
- priority=1
-}
-
-# EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel
-# (e.g., Radiator)
-network={
- ssid="example"
- key_mgmt=WPA-EAP
- eap=PEAP
- identity="user@example.com"
- password="foobar"
- ca_cert="/etc/cert/ca.pem"
- phase1="peaplabel=1"
- phase2="auth=MSCHAPV2"
- priority=10
-}
-
-# EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the
-# unencrypted use. Real identity is sent only within an encrypted TLS tunnel.
-network={
- ssid="example"
- key_mgmt=WPA-EAP
- eap=TTLS
- identity="user@example.com"
- anonymous_identity="anonymous@example.com"
- password="foobar"
- ca_cert="/etc/cert/ca.pem"
- priority=2
-}
-
-# EAP-TTLS/MSCHAPv2 configuration with anonymous identity for the unencrypted
-# use. Real identity is sent only within an encrypted TLS tunnel.
-network={
- ssid="example"
- key_mgmt=WPA-EAP
- eap=TTLS
- identity="user@example.com"
- anonymous_identity="anonymous@example.com"
- password="foobar"
- ca_cert="/etc/cert/ca.pem"
- phase2="auth=MSCHAPV2"
-}
-
-# WPA-EAP, EAP-TTLS with different CA certificate used for outer and inner
-# authentication.
-network={
- ssid="example"
- key_mgmt=WPA-EAP
- eap=TTLS
- # Phase1 / outer authentication
- anonymous_identity="anonymous@example.com"
- ca_cert="/etc/cert/ca.pem"
- # Phase 2 / inner authentication
- phase2="autheap=TLS"
- ca_cert2="/etc/cert/ca2.pem"
- client_cert2="/etc/cer/user.pem"
- private_key2="/etc/cer/user.prv"
- private_key2_passwd="password"
- priority=2
-}
-
-# Both WPA-PSK and WPA-EAP is accepted. Only CCMP is accepted as pairwise and
-# group cipher.
-network={
- ssid="example"
- bssid=00:11:22:33:44:55
- proto=WPA RSN
- key_mgmt=WPA-PSK WPA-EAP
- pairwise=CCMP
- group=CCMP
- psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
-}
-
-# Special characters in SSID, so use hex string. Default to WPA-PSK, WPA-EAP
-# and all valid ciphers.
-network={
- ssid=00010203
- psk=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f
-}
-
-
-# EAP-SIM with a GSM SIM or USIM
-network={
- ssid="eap-sim-test"
- key_mgmt=WPA-EAP
- eap=SIM
- pin="1234"
- pcsc=""
-}
-
-
-# EAP-PSK
-network={
- ssid="eap-psk-test"
- key_mgmt=WPA-EAP
- eap=PSK
- identity="eap_psk_user"
- eappsk=06b4be19da289f475aa46a33cb793029
- nai="eap_psk_user@example.com"
- server_nai="as@example.com"
-}
-
-
-# IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using
-# EAP-TLS for authentication and key generation; require both unicast and
-# broadcast WEP keys.
-network={
- ssid="1x-test"
- key_mgmt=IEEE8021X
- eap=TLS
- identity="user@example.com"
- ca_cert="/etc/cert/ca.pem"
- client_cert="/etc/cert/user.pem"
- private_key="/etc/cert/user.prv"
- private_key_passwd="password"
- eapol_flags=3
-}
-
-
-# LEAP with dynamic WEP keys
-network={
- ssid="leap-example"
- key_mgmt=IEEE8021X
- eap=LEAP
- identity="user"
- password="foobar"
-}
-
-# EAP-FAST with WPA (WPA or WPA2)
-network={
- ssid="eap-fast-test"
- key_mgmt=WPA-EAP
- eap=FAST
- anonymous_identity="FAST-000102030405"
- identity="username"
- password="password"
- phase1="fast_provisioning=1"
- pac_file="/etc/wpa_supplicant.eap-fast-pac"
-}
-
-# Plaintext connection (no WPA, no IEEE 802.1X)
-network={
- ssid="plaintext-test"
- key_mgmt=NONE
-}
-
-
-# Shared WEP key connection (no WPA, no IEEE 802.1X)
-network={
- ssid="static-wep-test"
- key_mgmt=NONE
- wep_key0="abcde"
- wep_key1=0102030405
- wep_key2="1234567890123"
- wep_tx_keyidx=0
- priority=5
-}
-
-
-# Shared WEP key connection (no WPA, no IEEE 802.1X) using Shared Key
-# IEEE 802.11 authentication
-network={
- ssid="static-wep-test2"
- key_mgmt=NONE
- wep_key0="abcde"
- wep_key1=0102030405
- wep_key2="1234567890123"
- wep_tx_keyidx=0
- priority=5
- auth_alg=SHARED
-}
-
-
-# IBSS/ad-hoc network with WPA-None/TKIP.
-network={
- ssid="test adhoc"
- mode=1
- proto=WPA
- key_mgmt=WPA-NONE
- pairwise=NONE
- group=TKIP
- psk="secret passphrase"
-}
-
-
-# Catch all example that allows more or less all configuration modes
-network={
- ssid="example"
- scan_ssid=1
- key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE
- pairwise=CCMP TKIP
- group=CCMP TKIP WEP104 WEP40
- psk="very secret passphrase"
- eap=TTLS PEAP TLS
- identity="user@example.com"
- password="foobar"
- ca_cert="/etc/cert/ca.pem"
- client_cert="/etc/cert/user.pem"
- private_key="/etc/cert/user.prv"
- private_key_passwd="password"
- phase1="peaplabel=0"
-}
--- /dev/null
+DESCRIPTION = "A Client for Wi-Fi Protected Access (WPA)."
+SECTION = "network"
+LICENSE = "GPL"
+HOMEPAGE = "http://hostap.epitest.fi/wpa_supplicant/"
+DEPENDS = "gnutls"
+
+SRC_URI = "http://hostap.epitest.fi/releases/wpa_supplicant-${PV}.tar.gz \
+ file://defconfig-gnutls \
+ file://init.sh \
+ file://gnutlsfix.patch;patch=1 \
+ file://defaults-sane \
+ file://wpa-supplicant.sh \
+ file://wpa_supplicant.conf \
+ file://wpa_supplicant.conf-sane"
+
+S = "${WORKDIR}/wpa_supplicant-${PV}"
+
+PACKAGES_prepend = "wpa-supplicant-passphrase wpa-supplicant-cli "
+FILES_wpa-supplicant-passphrase = "/usr/sbin/wpa_passphrase"
+FILES_wpa-supplicant-cli = "/usr/sbin/wpa_cli"
+
+RRECOMMENDS_${PN} = "wpa-supplicant-passphrase wpa-supplicant-cli"
+
+INITSCRIPT_NAME = "wpa"
+INITSCRIPT_PARAMS = "defaults 10"
+inherit update-rc.d
+
+do_configure () {
+ install -m 0755 ${WORKDIR}/defconfig-gnutls .config
+}
+
+do_compile () {
+ make
+}
+
+do_install () {
+ install -d ${D}${sbindir}
+ install -m 755 wpa_supplicant ${D}${sbindir}
+ install -m 755 wpa_passphrase ${D}${sbindir}
+ install -m 755 wpa_cli ${D}${sbindir}
+
+ install -d ${D}${localstatedir}/run/wpa_supplicant
+
+ install -d ${D}${docdir}/wpa_supplicant
+ install -m 644 README ${WORKDIR}/wpa_supplicant.conf ${D}${docdir}/wpa_supplicant
+
+ install -d ${D}${sysconfdir}/init.d
+ install -m 700 ${WORKDIR}/init.sh ${D}${sysconfdir}/init.d/wpa
+
+ install -d ${D}${sysconfdir}/default
+ install -m 600 ${WORKDIR}/defaults-sane ${D}${sysconfdir}/default/wpa
+ install -m 600 ${WORKDIR}/wpa_supplicant.conf-sane ${D}${sysconfdir}/wpa_supplicant.conf
+
+ install -d ${D}${sysconfdir}/network/if-pre-up.d/
+ install -d ${D}${sysconfdir}/network/if-post-down.d/
+ install -d ${D}${sysconfdir}/network/if-down.d/
+ install -m 644 ${WORKDIR}/wpa_supplicant.conf ${D}${sysconfdir}
+ install -m 755 ${WORKDIR}/wpa-supplicant.sh ${D}${sysconfdir}/network/if-pre-up.d/wpa-supplicant
+ cd ${D}${sysconfdir}/network/ && \
+ ln -sf ../if-pre-up.d/wpa-supplicant if-post-down.d/wpa-supplicant
+}
+++ /dev/null
-CONFIG_DRIVER_WEXT=y
-CONFIG_WIRELESS_EXTENSION=y
-CONFIG_DRIVER_HOSTAP=y
-
+++ /dev/null
-DESCRIPTION = "User space helper for WPA and WPA2 client operations. \
-The Supplicant is used in WPA/WPA2 key handshakes to authenticate \
-with the AP and to generate dynamic encryption keys (TKIP or CCMP)."
-
-PR = "r3"
-
-require wpa-supplicant_${PV}.inc
+++ /dev/null
-# CONFIG_DRIVER_HOSTAP is not set
-CONFIG_DRIVER_WEXT=y
-CONFIG_WIRELESS_EXTENSION=y
-CONFIG_DRIVER_HOSTAP=y
-CONFIG_IEEE8021X_EAPOL=y
-CONFIG_EAP_MD5=y
-CONFIG_MSCHAPV2=y
-CONFIG_EAP_TLS=y
-CONFIG_EAP_PEAP=y
-CONFIG_EAP_TTLS=y
-CONFIG_EAP_GTC=y
-CONFIG_EAP_OTP=y
-CONFIG_EAP_SIM=y
-CONFIG_EAP_LEAP=y
-#CONFIG_PCSC=y
+++ /dev/null
-DESCRIPTION = "User space helper for WPA and WPA2 client operations with SSL. \
-The Supplicant is used in WPA/WPA2 key handshakes to authenticate \
-with the AP and to generate dynamic encryption keys (TKIP or CCMP)."
-DEPENDSS = "openssl"
-PR = "r3"
-
-EXTRA_OEMAKE="LIBS='-L${STAGING_LIBDIR} -lssl -lcrypto' LIBS_p='-L${STAGING_LIBDIR} -lssl -lcrypto'"
-
-require wpa-supplicant_${PV}.inc
--- /dev/null
+Index: wpa_supplicant-0.5.5/tls_gnutls.c
+===================================================================
+--- wpa_supplicant-0.5.5.orig/tls_gnutls.c 2006-06-25 03:05:07.000000000 +0200
++++ wpa_supplicant-0.5.5/tls_gnutls.c 2006-10-29 15:12:21.000000000 +0100
+@@ -1029,8 +1029,13 @@
+ const u8 *in_data, size_t in_len,
+ size_t *out_len)
+ {
++ u8 *appl_data;
++ size_t appl_data_len;
++
++ appl_data = NULL;
++
+ return tls_connection_handshake(ssl_ctx, conn, in_data, in_len,
+- out_len);
++ out_len, appl_data, appl_data_len);
+ }
+
+
+++ /dev/null
-SECTION = "kernel/userland"
-HOMEPAGE = "http://hostap.epitest.fi/wpa_supplicant/"
-PRIORITY = "optional"
-LICENSE = "GPL"
-
-SRC_URI = "http://hostap.epitest.fi/releases/wpa_supplicant-${PV}.tar.gz \
- file://wpa-defconfig \
- file://wpa_supplicant_default.conf"
-
-RREPLACES_${PN} = "hostap-${PN}"
-RPROVIDES_${PN} = "hostap-${PN}"
-RCONFLICTS_${PN} = "hostap-${PN}"
-
-S = "${WORKDIR}/wpa_supplicant-${PV}"
-
-do_compile() {
- unset CFLAGS
- base_do_compile
-}
-
-do_configure() {
- install -m 0644 ${WORKDIR}/wpa-defconfig .config
-}
-
-do_install() {
- install -d ${D}${sysconfdir} ${D}${bindir}
- install -m 0644 wpa_supplicant.conf ${D}${sysconfdir}/wpa_supplicant.conf.sample
- install -m 0644 ../wpa_supplicant_default.conf ${D}${sysconfdir}/wpa_supplicant.conf
- install -m 0755 wpa_passphrase ${D}${bindir}
- install -m 0755 wpa_cli ${D}${bindir}
- install -m 0755 wpa_supplicant ${D}${bindir}
-}
-
+++ /dev/null
-DESCRIPTION = "A Client for Wi-Fi Protected Access (WPA)."
-SECTION = "network"
-LICENSE = "GPL"
-HOMEPAGE = "http://hostap.epitest.fi/wpa_supplicant/"
-DEPENDS = "openssl"
-PR = "r3"
-
-SRC_URI = "http://hostap.epitest.fi/releases/wpa_supplicant-0.3.6.tar.gz \
- file://defconfig \
- file://driver-hermes.patch;patch=1 \
- file://wpa_supplicant.conf"
-S = "${WORKDIR}/wpa_supplicant-${PV}"
-
-do_configure () {
- install -m 0755 ${WORKDIR}/defconfig .config
-}
-
-do_compile () {
- make
-}
-
-do_install () {
- install -d ${D}${sbindir}
- install -m755 wpa_supplicant ${D}${sbindir}
- install -m755 wpa_passphrase ${D}${sbindir}
- install -m755 wpa_cli ${D}${sbindir}
-
- install -d ${D}${sysconfdir}
- install -m644 ${WORKDIR}/wpa_supplicant.conf ${D}${sysconfdir}
-
- install -d ${D}${docdir}/wpa_supplicant
- install -m644 README ${D}${docdir}/wpa_supplicant
-}
+++ /dev/null
-DESCRIPTION = "A Client for Wi-Fi Protected Access (WPA)."
-SECTION = "network"
-LICENSE = "GPL"
-HOMEPAGE = "http://hostap.epitest.fi/wpa_supplicant/"
-DEPENDS = "openssl"
-DEPENDS_mtx-1_append = "madwifi-modules"
-PR = "r1"
-
-SRC_URI = "http://hostap.epitest.fi/releases/wpa_supplicant-${PV}.tar.gz \
- file://madwifi-bsd-fix.diff;patch=1;pnum=0 \
- file://defconfig \
- file://driver-hermes.patch;patch=1 \
- file://wpa_supplicant.conf"
-S = "${WORKDIR}/wpa_supplicant-${PV}"
-
-do_configure () {
- install -m 0755 ${WORKDIR}/defconfig .config
-}
-
-do_compile () {
- make
-}
-
-do_install () {
- install -d ${D}${sbindir}
- install -m755 wpa_supplicant ${D}${sbindir}
- install -m755 wpa_passphrase ${D}${sbindir}
- install -m755 wpa_cli ${D}${sbindir}
-
- install -d ${D}${sysconfdir}
- install -m644 ${WORKDIR}/wpa_supplicant.conf ${D}${sysconfdir}
-
- install -d ${D}${docdir}/wpa_supplicant
- install -m644 README ${D}${docdir}/wpa_supplicant
-}
+++ /dev/null
-DESCRIPTION = "A Client for Wi-Fi Protected Access (WPA)."
-SECTION = "network"
-LICENSE = "GPL"
-HOMEPAGE = "http://hostap.epitest.fi/wpa_supplicant/"
-DEPENDS = "openssl"
-DEPENDS_mtx-1_append = "madwifi-modules"
-PR = "r1"
-
-SRC_URI = "http://hostap.epitest.fi/releases/wpa_supplicant-${PV}.tar.gz \
- file://madwifi-bsd-fix.diff;patch=1;pnum=0 \
- file://defconfig \
- file://driver-hermes.patch;patch=1 \
- file://driver-zd1211.patch;patch=1 \
- file://wpa_supplicant.conf"
-
-S = "${WORKDIR}/wpa_supplicant-${PV}"
-
-do_configure () {
- install -m 0755 ${WORKDIR}/defconfig .config
-}
-
-do_compile () {
- make
-}
-
-do_install () {
- install -d ${D}${sbindir}
- install -m755 wpa_supplicant ${D}${sbindir}
- install -m755 wpa_passphrase ${D}${sbindir}
- install -m755 wpa_cli ${D}${sbindir}
-
- install -d ${D}${sysconfdir}
- install -m644 ${WORKDIR}/wpa_supplicant.conf ${D}${sysconfdir}
-
- install -d ${D}${docdir}/wpa_supplicant
- install -m644 README ${D}${docdir}/wpa_supplicant
-}
+++ /dev/null
-DESCRIPTION = "A Client for Wi-Fi Protected Access (WPA)."
-SECTION = "network"
-LICENSE = "GPL"
-HOMEPAGE = "http://hostap.epitest.fi/wpa_supplicant/"
-DEPENDS = "gnutls madwifi-ng"
-
-PR = "r4"
-DEFAULT_PREFERENCE = "-1"
-
-SRC_URI = "http://hostap.epitest.fi/releases/wpa_supplicant-${PV}.tar.gz \
- file://defconfig-gnutls \
- file://init.sh \
- file://defaults-sane \
- file://wpa_supplicant.conf \
- file://wpa_supplicant.conf-sane"
-
-S = "${WORKDIR}/wpa_supplicant-${PV}"
-
-PACKAGES_prepend = "wpa-supplicant-passphrase wpa-supplicant-cli "
-FILES_wpa-supplicant-passphrase = "/usr/sbin/wpa_passphrase"
-FILES_wpa-supplicant-cli = "/usr/sbin/wpa_cli"
-
-RRECOMMENDS_${PN} = "wpa-supplicant-passphrase wpa-supplicant-cli"
-
-INITSCRIPT_NAME = "wpa"
-INITSCRIPT_PARAMS = "defaults 10"
-inherit update-rc.d
-
-do_configure () {
- install -m 0755 ${WORKDIR}/defconfig-gnutls .config
- echo "CONFIG_DRIVER_MADWIFI=y" >> .config
- echo "CFLAGS += -I${STAGING_INCDIR}/madwifi-ng" >> .config
-}
-
-do_compile () {
- make
-}
-
-do_install () {
- install -d ${D}${sbindir}
- install -m755 wpa_supplicant ${D}${sbindir}
- install -m755 wpa_passphrase ${D}${sbindir}
- install -m755 wpa_cli ${D}${sbindir}
-
- install -d ${D}${localstatedir}/run/wpa_supplicant
-
- install -d ${D}${docdir}/wpa_supplicant
- install -m644 README ${WORKDIR}/wpa_supplicant.conf ${D}${docdir}/wpa_supplicant
-
- install -d ${D}${sysconfdir}/init.d
- install -m700 ${WORKDIR}/init.sh ${D}${sysconfdir}/init.d/wpa
-
- install -d ${D}${sysconfdir}/default
- install -m600 ${WORKDIR}/defaults-sane ${D}${sysconfdir}/default/wpa
- install -m600 ${WORKDIR}/wpa_supplicant.conf-sane ${D}${sysconfdir}/wpa_supplicant.conf
-}
--- /dev/null
+require wpa-supplicant-0.5.inc
+++ /dev/null
-DESCRIPTION = "Client for Wi-Fi Protected Access (WPA)."
-SECTION = "network"
-LICENSE = "GPL"
-HOMEPAGE = "http://hostap.epitest.fi/wpa_supplicant/"
-DEPENDS = "openssl"
-PV = "0.0+cvs${SRCDATE}"
-PR = "r2"
-
-SRC_URI = "cvs://anonymous@hostap.epitest.fi/cvs;module=hostap \
- file://use-channel.patch;patch=1 \
- file://driver-hermes.patch;patch=1 \
- file://defconfig \
- file://defaults \
- file://init.sh \
- file://wpa_supplicant.conf"
-S = "${WORKDIR}/hostap/wpa_supplicant"
-
-
-PACKAGES_prepend = "wpa-supplicant-passphrase wpa-supplicant-cli "
-FILES_wpa-supplicant-passphrase = "/usr/sbin/wpa_passphrase"
-FILES_wpa-supplicant-cli = "/usr/sbin/wpa_cli"
-
-RRECOMMENDS_${PN} = "wpa-supplicant-passphrase wpa-supplicant-cli"
-
-
-INITSCRIPT_NAME = "wpa"
-INITSCRIPT_PARAMS = "defaults 10"
-inherit update-rc.d
-
-
-do_configure () {
- install -m 0755 ${WORKDIR}/defconfig .config
-}
-
-
-do_compile () {
- make
-}
-
-
-do_install () {
- set -x
- install -d ${D}${sbindir}
- install -m755 wpa_supplicant ${D}${sbindir}
- install -m755 wpa_passphrase ${D}${sbindir}
- install -m755 wpa_cli ${D}${sbindir}
-
- install -d ${D}${localstatedir}/run/wpa_supplicant
-
- install -d ${D}${docdir}/wpa_supplicant
- install -m644 README ${WORKDIR}/wpa_supplicant.conf ${D}${docdir}/wpa_supplicant
-
- install -d ${D}${sysconfdir}/init.d
- install -m700 ${WORKDIR}/init.sh ${D}${sysconfdir}/init.d/wpa
-
- install -d ${D}${sysconfdir}/default
- install -m600 ${WORKDIR}/defaults ${D}${sysconfdir}/default/wpa
-}
