imx8qm-mek: Rename, update to B0, add PCI, OP-TEE, Broadcom WiFi, and device trees

Rename to match device tree name and improve readability.

Update to B0, which requires boot seek of 32.

Fix missing pci support.

Add OP-TEE support. Add optee to MACHINE_FEATURES to enable OP-TEE
in u-boot-imx. OP-TEE is currently not supported by u-boot-fslc.

Enable Broadcom 4356, 4359, and 43455 WiFi modules.

Add device trees for PCIE EP, lvds, Sound Open Firmware, and USD WiFi.

Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>

diff --git a/conf/machine/imx8qm-mek.conf b/conf/machine/imx8qm-mek.conf
new file mode 100644 (file)
index 0000000..c7b09d6
--- /dev/null
+++ b/conf/machine/imx8qm-mek.conf
@@ -0,0 +1,85 @@
+#@TYPE: Machine
+#@NAME: i.MX 8QM MEK
+#@DESCRIPTION: i.MX 8QuadMax Multisensory Enablement Kit board, rev B0
+#@MAINTAINER: Lauren Post <lauren.post@nxp.com>
+
+MACHINEOVERRIDES =. "mx8:mx8qm:"
+
+require conf/machine/include/imx-base.inc
+require conf/machine/include/tune-cortexa72-cortexa53.inc
+
+IMX_DEFAULT_BSP = "nxp"
+
+MACHINE_FEATURES += "pci optee bcm43455 bcm4356"
+MACHINE_FEATURES_append_use-nxp-bsp = " bcm4359"
+
+# Don't include kernels in standard images
+RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
+
+LOADADDR = ""
+
+# We have to disable SERIAL_CONSOLE due to auto-serial-console
+SERIAL_CONSOLES = "115200;ttyAMA0"
+
+# we do not want to have getty running on tty1 as we run
+# auto-serial-console there
+USE_VT = "0"
+
+KERNEL_DEVICETREE = " \
+       freescale/imx8qm-mek.dtb \
+       freescale/imx8qm-mek-ca53.dtb \
+       freescale/imx8qm-mek-ca72.dtb \
+       freescale/imx8qm-mek-dom0.dtb \
+       freescale/imx8qm-mek-domu.dtb \
+       freescale/imx8qm-mek-dsi-rm67191.dtb \
+       freescale/imx8qm-mek-dsp.dtb \
+       freescale/imx8qm-mek-enet2-tja1100.dtb \
+       freescale/imx8qm-mek-hdmi.dtb \
+       freescale/imx8qm-mek-inmate.dtb \
+       freescale/imx8qm-mek-jdi-wuxga-lvds1-panel.dtb \
+       freescale/imx8qm-mek-jdi-wuxga-lvds1-panel-rpmsg.dtb \
+       freescale/imx8qm-mek-ov5640.dtb \
+       freescale/imx8qm-mek-pcie-ep.dtb \
+       freescale/imx8qm-mek-root.dtb \
+       freescale/imx8qm-mek-rpmsg.dtb \
+       freescale/imx8qm-mek-sof-cs42888.dtb \
+       freescale/imx8qm-mek-sof-wm8960.dtb \
+       freescale/imx8qm-mek-usd-wifi.dtb \
+       freescale/imx8qm-mek-usdhc3-m2.dtb \
+"
+
+UBOOT_MAKE_TARGET = \
+    "${@bb.utils.contains('MACHINE_FEATURES', 'optee', '', \
+                                                       'u-boot.bin', d)}"
+SPL_BINARY_imx8qmmek = \
+    "${@bb.utils.contains('MACHINE_FEATURES', 'optee', 'spl/u-boot-spl.bin', \
+                                                       '', d)}"
+UBOOT_SUFFIX = "bin"
+
+UBOOT_CONFIG ??= "sd"
+UBOOT_CONFIG[sd]      = "imx8qm_mek_defconfig,sdcard"
+UBOOT_CONFIG[fspi]    = "imx8qm_mek_fspi_defconfig"
+UBOOT_CONFIG[mfgtool] = "imx8qm_mek_defconfig"
+
+IMX_BOOT_SEEK = "32"
+
+IMAGE_BOOT_FILES += "hdmitxfw.bin hdmirxfw.bin dpfw.bin"
+
+# Set ATF platform name
+ATF_PLATFORM = "imx8qm"
+
+IMXBOOT_TARGETS_SD = \
+    "${@bb.utils.contains('MACHINE_FEATURES', 'optee', 'flash_spl', \
+                                                       'flash flash_ca72', d)}"
+IMXBOOT_TARGETS_FSPI = \
+    "${@bb.utils.contains('MACHINE_FEATURES', 'optee', 'flash_spl_flexspi', \
+                                                       'flash_flexspi', d)}"
+IMXBOOT_TARGETS = \
+    "${@bb.utils.contains('UBOOT_CONFIG',        'sd', '${IMXBOOT_TARGETS_SD}', \
+                                                       '${IMXBOOT_TARGETS_FSPI}', d)}"
+IMX_BOOT_SOC_TARGET = "iMX8QM"
+
+BOARD_TYPE = "mek"
+
+# Add additional firmware
+MACHINE_FIRMWARE_append = " linux-firmware-ath10k"

diff --git a/conf/machine/imx8qmmek.conf b/conf/machine/imx8qmmek.conf
deleted file mode 100644 (file)
index 41a6bbe..0000000
--- a/conf/machine/imx8qmmek.conf
+++ /dev/null
@@ -1,67 +0,0 @@
-#@TYPE: Machine
-#@NAME: i.MX 8QM MEK
-#@DESCRIPTION: i.MX 8QuadMax MEK board
-#@MAINTAINER: Alexandru Palalau <ioan-alexandru.palalau@nxp.com>
-
-MACHINEOVERRIDES =. "mx8:mx8qm:"
-
-require conf/machine/include/imx-base.inc
-require conf/machine/include/tune-cortexa72-cortexa53.inc
-
-IMX_DEFAULT_BSP = "nxp"
-
-MACHINE_FEATURES_append = " qca6174"
-
-# Don't include kernels in standard images
-RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
-
-LOADADDR = ""
-
-# We have to disable SERIAL_CONSOLE due to auto-serial-console
-SERIAL_CONSOLES = "115200;ttyAMA0"
-
-# we do not want to have getty running on tty1 as we run
-# auto-serial-console there
-USE_VT = "0"
-
-KERNEL_DEVICETREE = " \
-       freescale/imx8qm-mek-ca53.dtb \
-       freescale/imx8qm-mek-ca72.dtb \
-       freescale/imx8qm-mek-dom0.dtb \
-       freescale/imx8qm-mek-domu.dtb \
-       freescale/imx8qm-mek-dsi-rm67191.dtb \
-       freescale/imx8qm-mek-dsp.dtb \
-       freescale/imx8qm-mek.dtb \
-       freescale/imx8qm-mek-enet2-tja1100.dtb \
-       freescale/imx8qm-mek-hdmi.dtb \
-       freescale/imx8qm-mek-inmate.dtb \
-       freescale/imx8qm-mek-jdi-wuxga-lvds1-panel.dtb \
-       freescale/imx8qm-mek-ov5640.dtb \
-       freescale/imx8qm-mek-root.dtb \
-       freescale/imx8qm-mek-rpmsg.dtb \
-"
-
-UBOOT_MAKE_TARGET = "u-boot.bin"
-UBOOT_SUFFIX = "bin"
-UBOOT_CONFIG ??= "sd"
-UBOOT_CONFIG[sd] = "imx8qm_mek_defconfig,sdcard"
-UBOOT_CONFIG[fspi] = "imx8qm_mek_fspi_defconfig"
-UBOOT_CONFIG[mfgtool] = "imx8qm_mek_defconfig"
-
-IMX_BOOT_SEEK = "33"
-
-WKS_FILE_DEPENDS_append = " firmware-imx-8"
-IMAGE_BOOT_FILES += "hdmitxfw.bin hdmirxfw.bin dpfw.bin"
-
-# Set ATF platform name
-ATF_PLATFORM = "imx8qm"
-
-IMXBOOT_TARGETS = \
-    "${@bb.utils.contains('UBOOT_CONFIG',         'sd', 'flash', \
-                                                        'flash_flexspi', d)}"
-IMX_BOOT_SOC_TARGET = "iMX8QM"
-
-BOARD_TYPE = "mek"
-
-# Add additional firmware
-MACHINE_FIRMWARE_append = " linux-firmware-ath10k"