imx8dxmek: Add new board i.MX 8DX MEK

Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>

diff --git a/conf/machine/imx8dxmek.conf b/conf/machine/imx8dxmek.conf
new file mode 100644 (file)
index 0000000..16eb4e5
--- /dev/null
+++ b/conf/machine/imx8dxmek.conf
@@ -0,0 +1,73 @@
+#@TYPE: Machine
+#@NAME: i.MX 8DX MEK
+#@DESCRIPTION: i.MX 8DX Multisensory Enablement Kit (MEK) board
+#@MAINTAINER: Lauren Post <lauren.post@nxp.com>
+
+MACHINEOVERRIDES =. "mx8:mx8x:mx8qxp:mx8dx:"
+
+require conf/machine/include/imx-base.inc
+require conf/machine/include/tune-cortexa35.inc
+
+IMX_DEFAULT_BSP = "nxp"
+
+MACHINE_FEATURES += "pci optee bcm43455 bcm4356"
+MACHINE_FEATURES_append_use-nxp-bsp = " bcm4359"
+
+# Don't include kernels in standard images
+RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
+
+LOADADDR = ""
+
+# We have to disable SERIAL_CONSOLE due to auto-serial-console
+SERIAL_CONSOLES = "115200;ttyAMA0"
+
+# we do not want to have getty running on tty1 as we run
+# auto-serial-console there
+USE_VT = "0"
+
+KERNEL_DEVICETREE = "freescale/imx8dx-mek.dtb"
+KERNEL_DEVICETREE_append_use-nxp-bsp = " \
+    freescale/imx8dx-mek-dsi-rm67191.dtb \
+    freescale/imx8dx-mek-dsi-rm67191-rpmsg.dtb \
+    freescale/imx8dx-mek-dsp.dtb \
+    freescale/imx8dx-mek-enet2-tja1100.dtb \
+    freescale/imx8dx-mek-it6263-lvds0-dual-channel.dtb \
+    freescale/imx8dx-mek-it6263-lvds0-dual-channel-rpmsg.dtb \
+    freescale/imx8dx-mek-it6263-lvds1-dual-channel.dtb \
+    freescale/imx8dx-mek-it6263-lvds1-dual-channel-rpmsg.dtb \
+    freescale/imx8dx-mek-jdi-wuxga-lvds0-panel.dtb \
+    freescale/imx8dx-mek-jdi-wuxga-lvds0-panel-rpmsg.dtb \
+    freescale/imx8dx-mek-jdi-wuxga-lvds1-panel.dtb \
+    freescale/imx8dx-mek-jdi-wuxga-lvds1-panel-rpmsg.dtb \
+    freescale/imx8dx-mek-ov5640.dtb \
+    freescale/imx8dx-mek-ov5640-rpmsg.dtb \
+    freescale/imx8dx-mek-rpmsg.dtb \
+"
+
+UBOOT_MAKE_TARGET = \
+    "${@bb.utils.contains('MACHINE_FEATURES', 'optee', '', \
+                                                       'u-boot.bin', d)}"
+SPL_BINARY = \
+    "${@bb.utils.contains('MACHINE_FEATURES', 'optee', 'spl/u-boot-spl.bin', \
+                                                       '', d)}"
+
+UBOOT_CONFIG ??= "sd"
+UBOOT_CONFIG[sd]   = "imx8dx_mek_config,sdcard"
+UBOOT_CONFIG[fspi] = "imx8dx_mek_fspi_defconfig"
+
+IMX_BOOT_SEEK = "32"
+
+IMXBOOT_TARGETS_SD = \
+    "${@bb.utils.contains('MACHINE_FEATURES', 'optee', 'flash_spl', \
+                                                       'flash', d)}"
+IMXBOOT_TARGETS_FSPI = \
+    "${@bb.utils.contains('MACHINE_FEATURES', 'optee', 'flash_spl_flexspi', \
+                                                       'flash_flexspi', d)}"
+IMXBOOT_TARGETS = \
+    "${@bb.utils.contains('UBOOT_CONFIG',        'sd', '${IMXBOOT_TARGETS_SD}', \
+                                                       '${IMXBOOT_TARGETS_FSPI}', d)}"
+
+BOARD_TYPE = "mek"
+
+# Add additional firmware
+MACHINE_FIRMWARE_append = " linux-firmware-ath10k"