+++ /dev/null
-#
-# checkroot.sh Check to root filesystem.
-#
-# Version: @(#)checkroot.sh 2.84 25-Jan-2002 miquels@cistron.nl
-#
-
-. /etc/default/rcS
-
-#
-# Set SULOGIN in /etc/default/rcS to yes if you want a sulogin to be spawned
-# from this script *before anything else* with a timeout, like SCO does.
-#
-test "$SULOGIN" = yes && sulogin -t 30 $CONSOLE
-
-#
-# Ensure that bdflush (update) is running before any major I/O is
-# performed (the following fsck is a good example of such activity :).
-#
-test -x /sbin/update && update
-
-#
-# Read /etc/fstab.
-#
-exec 9>&0 </etc/fstab
-rootmode=rw
-rootopts=rw
-test "$ENABLE_ROOTFS_FSCK" = yes && rootcheck="yes" || rootcheck="no"
-swap_on_md=no
-devfs=
-while read fs mnt type opts dump pass junk
-do
- case "$fs" in
- ""|\#*)
- continue;
- ;;
- /dev/md*)
- # Swap on md device.
- test "$type" = swap && swap_on_md=yes
- ;;
- /dev/*)
- ;;
- *)
- # Might be a swapfile.
- test "$type" = swap && swap_on_md=yes
- ;;
- esac
-
- test "$type" = devfs && devfs="$fs"
-
- # Currently we do not care about the other entries
- if test "$mnt" = "/"
- then
- #echo "[$fs] [$mnt] [$type] [$opts] [$dump] [$pass] [$junk]"
-
- rootopts="$opts"
- roottype="$type"
-
- #The "spinner" is broken on busybox sh
- TERM=dumb
-
- test "$pass" = 0 -o "$pass" = "" && rootcheck=no
-
- # Enable fsck for ext2 and ext3 rootfs, disable for everything else
- case "$type" in
- ext3) rootcheck=yes;;
- *) rootcheck=no;;
- esac
-
- if test "$rootcheck" = yes
- then
- if ! test -x "/sbin/fsck.${roottype}"
- then
- echo -e "\n * * * WARNING: /sbin/fsck.${roottype} is missing! * * *\n"
- rootcheck=no
- fi
- fi
-
- case "$opts" in
- ro|ro,*|*,ro|*,ro,*)
- rootmode=ro
- ;;
- esac
- fi
-done
-exec 0>&9 9>&-
-
-#
-# Activate the swap device(s) in /etc/fstab. This needs to be done
-# before fsck, since fsck can be quite memory-hungry.
-#
-doswap=no
-test -d /proc/1 || mount -n /proc
-case "`uname -r`" in
- 2.[0123].*)
- if test $swap_on_md = yes && grep -qs resync /proc/mdstat
- then
- test "$VERBOSE" != no && echo "Not activating swap - RAID array resyncing"
- else
- doswap=yes
- fi
- ;;
- *)
- doswap=yes
- ;;
-esac
-if test $doswap = yes
-then
- test "$VERBOSE" != no && echo "Activating swap"
- swapon -a 2> /dev/null
-fi
-
-#
-# Check the root filesystem.
-#
-if test -f /fastboot || test $rootcheck = no
-then
- test $rootcheck = yes && echo "Fast boot, no filesystem check"
-else
- #
- # Ensure that root is quiescent and read-only before fsck'ing.
- #
- mount -n -o remount,ro /
- if test $? = 0
- then
- if test -f /forcefsck
- then
- force="-f"
- else
- force=""
- fi
- if test "$FSCKFIX" = yes
- then
- fix="-y"
- else
- fix="-a"
- fi
- spinner="-C"
- case "$TERM" in
- dumb|network|unknown|"") spinner="" ;;
- esac
- test `uname -m` = s390 && spinner="" # This should go away
- test "$VERBOSE" != no && echo "Checking root filesystem..."
- fsck $spinner $force $fix /
- #
- # If there was a failure, drop into single-user mode.
- #
- # NOTE: "failure" is defined as exiting with a return code of
- # 2 or larger. A return code of 1 indicates that filesystem
- # errors were corrected but that the boot may proceed.
- #
- if test "$?" -gt 1
- then
-
- # Since this script is run very early in the boot-process, it should be safe to assume that the
- # output is printed to VT1. However, some distributions use a bootsplash to hide the "ugly" boot
- # messages and having the bootsplash "hang" due to a waiting fsck prompt is less than ideal
- chvt 1
-
- # Surprise! Re-directing from a HERE document (as in
- # "cat << EOF") won't work, because the root is read-only.
- echo
- echo "fsck failed. Please repair manually and reboot. Please note"
- echo "that the root filesystem is currently mounted read-only. To"
- echo "remount it read-write:"
- echo
- echo " # mount -n -o remount,rw /"
- echo
- echo "CONTROL-D will exit from this shell and REBOOT the system."
- echo
- # Start a single user shell on the console
- /sbin/sulogin $CONSOLE
- reboot -f
- fi
- else
- echo "*** ERROR! Cannot fsck root fs because it is not mounted read-only!"
- echo
- fi
-fi
-
-#
-# If the root filesystem was not marked as read-only in /etc/fstab,
-# remount the rootfs rw but do not try to change mtab because it
-# is on a ro fs until the remount succeeded. Then clean up old mtabs
-# and finally write the new mtab.
-# This part is only needed if the rootfs was mounted ro.
-#
-if [ $(grep rootfs /proc/mounts | awk '{print $4}') = rw ]; then
- exit 0
-fi
-
-# Add a second check, which seems to be needed for some kernel versions
-if [ $(grep "/dev/root" /proc/mounts | awk '{print $4}') = rw ]; then
- exit 0
-fi
-
-
-echo "Remounting root file system..."
-mount -n -o remount,$rootmode /
-if test "$rootmode" = rw
-then
- if test ! -L /etc/mtab
- then
- rm -f /etc/mtab~ /etc/nologin
- : > /etc/mtab
- fi
- mount -f -o remount /
- mount -f /proc
- test "$devfs" && grep -q '^devfs /dev' /proc/mounts && mount -f "$devfs"
-fi
-
-: exit 0
+++ /dev/null
-#
-# checkroot.sh Check to root filesystem.
-#
-# Version: @(#)checkroot.sh 2.84 25-Jan-2002 miquels@cistron.nl
-#
-
-. /etc/default/rcS
-
-#
-# Set SULOGIN in /etc/default/rcS to yes if you want a sulogin to be spawned
-# from this script *before anything else* with a timeout, like SCO does.
-#
-test "$SULOGIN" = yes && sulogin -t 30 $CONSOLE
-
-#
-# Ensure that bdflush (update) is running before any major I/O is
-# performed (the following fsck is a good example of such activity :).
-#
-test -x /sbin/update && update
-
-#
-# Read /etc/fstab.
-#
-exec 9>&0 </etc/fstab
-rootmode=rw
-rootopts=rw
-test "$ENABLE_ROOTFS_FSCK" = yes && rootcheck="yes" || rootcheck="no"
-swap_on_md=no
-devfs=
-while read fs mnt type opts dump pass junk
-do
- case "$fs" in
- ""|\#*)
- continue;
- ;;
- /dev/md*)
- # Swap on md device.
- test "$type" = swap && swap_on_md=yes
- ;;
- /dev/*)
- ;;
- *)
- # Might be a swapfile.
- test "$type" = swap && swap_on_md=yes
- ;;
- esac
-
- test "$type" = devfs && devfs="$fs"
-
- # Currently we do not care about the other entries
- if test "$mnt" = "/"
- then
- #echo "[$fs] [$mnt] [$type] [$opts] [$dump] [$pass] [$junk]"
-
- rootopts="$opts"
- roottype="$type"
-
- #The "spinner" is broken on busybox sh
- TERM=dumb
-
- test "$pass" = 0 -o "$pass" = "" && rootcheck=no
-
- # Enable fsck for ext2 and ext3 rootfs, disable for everything else
- case "$type" in
- ext3) rootcheck=yes;;
- *) rootcheck=no;;
- esac
-
- if test "$rootcheck" = yes
- then
- if ! test -x "/sbin/fsck.${roottype}"
- then
- echo -e "\n * * * WARNING: /sbin/fsck.${roottype} is missing! * * *\n"
- rootcheck=no
- fi
- fi
-
- case "$opts" in
- ro|ro,*|*,ro|*,ro,*)
- rootmode=ro
- ;;
- esac
- fi
-done
-exec 0>&9 9>&-
-
-#
-# Activate the swap device(s) in /etc/fstab. This needs to be done
-# before fsck, since fsck can be quite memory-hungry.
-#
-doswap=no
-test -d /proc/1 || mount -n /proc
-case "`uname -r`" in
- 2.[0123].*)
- if test $swap_on_md = yes && grep -qs resync /proc/mdstat
- then
- test "$VERBOSE" != no && echo "Not activating swap - RAID array resyncing"
- else
- doswap=yes
- fi
- ;;
- *)
- doswap=yes
- ;;
-esac
-if test $doswap = yes
-then
- test "$VERBOSE" != no && echo "Activating swap"
- swapon -a 2> /dev/null
-fi
-
-#
-# Check the root filesystem.
-#
-if test -f /fastboot || test $rootcheck = no
-then
- test $rootcheck = yes && echo "Fast boot, no filesystem check"
-else
- #
- # Ensure that root is quiescent and read-only before fsck'ing.
- #
- mount -n -o remount,ro /
- if test $? = 0
- then
- if test -f /forcefsck
- then
- force="-f"
- else
- force=""
- fi
- if test "$FSCKFIX" = yes
- then
- fix="-y"
- else
- fix="-a"
- fi
- spinner="-C"
- case "$TERM" in
- dumb|network|unknown|"") spinner="" ;;
- esac
- test `uname -m` = s390 && spinner="" # This should go away
- test "$VERBOSE" != no && echo "Checking root filesystem..."
- fsck $spinner $force $fix /
- #
- # If there was a failure, drop into single-user mode.
- #
- # NOTE: "failure" is defined as exiting with a return code of
- # 2 or larger. A return code of 1 indicates that filesystem
- # errors were corrected but that the boot may proceed.
- #
- if test "$?" -gt 1
- then
-
- # Since this script is run very early in the boot-process, it should be safe to assume that the
- # output is printed to VT1. However, some distributions use a bootsplash to hide the "ugly" boot
- # messages and having the bootsplash "hang" due to a waiting fsck prompt is less than ideal
- chvt 1
-
- # Surprise! Re-directing from a HERE document (as in
- # "cat << EOF") won't work, because the root is read-only.
- echo
- echo "fsck failed. Please repair manually and reboot. Please note"
- echo "that the root filesystem is currently mounted read-only. To"
- echo "remount it read-write:"
- echo
- echo " # mount -n -o remount,rw /"
- echo
- echo "CONTROL-D will exit from this shell and REBOOT the system."
- echo
- # Start a single user shell on the console
- /sbin/sulogin $CONSOLE
- reboot -f
- fi
- else
- echo "*** ERROR! Cannot fsck root fs because it is not mounted read-only!"
- echo
- fi
-fi
-
-#
-# If the root filesystem was not marked as read-only in /etc/fstab,
-# remount the rootfs rw but do not try to change mtab because it
-# is on a ro fs until the remount succeeded. Then clean up old mtabs
-# and finally write the new mtab.
-# This part is only needed if the rootfs was mounted ro.
-#
-if [ $(grep rootfs /proc/mounts | awk '{print $4}') = rw ]; then
- exit 0
-fi
-
-# Add a second check, which seems to be needed for some kernel versions
-if [ $(grep "/dev/root" /proc/mounts | awk '{print $4}') = rw ]; then
- exit 0
-fi
-
-
-echo "Remounting root file system..."
-mount -n -o remount,$rootmode /
-if test "$rootmode" = rw
-then
- if test ! -L /etc/mtab
- then
- rm -f /etc/mtab~ /etc/nologin
- : > /etc/mtab
- fi
- mount -f -o remount /
- mount -f /proc
- test "$devfs" && grep -q '^devfs /dev' /proc/mounts && mount -f "$devfs"
-fi
-
-: exit 0
+++ /dev/null
-# /etc/inittab: init(8) configuration.
-# $Id: inittab,v 1.91 2002/01/25 13:35:21 miquels Exp $
-
-# The default runlevel.
-id:5:initdefault:
-
-# Boot-time system configuration/initialization script.
-# This is run first except when booting in emergency (-b) mode.
-si::sysinit:/etc/init.d/rcS
-
-# What to do in single-user mode.
-~~:S:wait:/sbin/sulogin
-
-# Shut down if kernel sends us SIGINT or SIGPWR
-ca::ctrlaltdel:/sbin/halt -p
-pf::powerfailnow:/sbin/halt -p
-
-# /etc/init.d executes the S and K scripts upon change
-# of runlevel.
-#
-# Runlevel 0 is halt.
-# Runlevel 1 is single-user.
-# Runlevels 2-5 are multi-user.
-# Runlevel 6 is reboot.
-
-l0:0:wait:/etc/init.d/rc 0
-l1:1:wait:/etc/init.d/rc 1
-l2:2:wait:/etc/init.d/rc 2
-l3:3:wait:/etc/init.d/rc 3
-l4:4:wait:/etc/init.d/rc 4
-l5:5:wait:/etc/init.d/rc 5
-l6:6:wait:/etc/init.d/rc 6
-# Normally not reached, but fallthrough in case of emergency.
-z6:6:respawn:/sbin/sulogin
-
-# /sbin/getty invocations for the runlevels.
-#
-# The "id" field MUST be the same as the last
-# characters of the device (after "tty").
-#
-# Format:
-# <id>:<runlevels>:<action>:<process>
-
-# NOTE: FIC GTA01 has this odd multiplexer on ttySAC0 since
-# GSM shares it with the serial output. We only allow
-# the getty in runlevel 2 to cope with that. gsmd gets
-# started in runlevel 3. -- mickey@openmoko.org
-S:2:respawn:/sbin/getty 115200 ttySAC0
+++ /dev/null
-#!/bin/sh
-
-if (grep -q 'tmpfs.*/var.*tmpfs' /proc/mounts)
-then
- test "$VERBOSE" != no && echo "Copying /var filesystem..."
- cp -a /boot/var /
-fi
+++ /dev/null
-#!/bin/sh
-# Original author: ???
-#
-# Additions by Steph Meslin-Weber:
-# x Percentage display
-# x Dot display of dependency installations
-# - removed both of above
-# - display is now X of Y packages and current package name being installed
-
-#. /etc/default/rcS
-
-reconfigure () {
- pkg=$1
- path=$2
- isdependent=$3
- test -e "$path/info/$pkg.control" || return 1
- depends="`cat $path/info/$pkg.control|grep Depends|cut -d: -f2`"
-
- # make sure we haven't already installed this package
- isthere=`cat /tmp/.configured.list|grep $pkg`
- if test "$isthere" != ""; then
- return 1
- fi
-
- if test "$depends" != ""; then
- for dep in $depends; do
- (echo $log|grep $dep >/dev/null 2>&1) || ( reconfigure $dep $path "$max" "$pkg" && log="$log $dep"; )
- done
- fi
-
- echo -ne " ${pkg}"
-
- test -e "$path/info/$pkg.prerm" && $path/info/$pkg.prerm unconfigure >/dev/null 2>&1
- test -e "$path/info/$pkg.postinst" && $path/info/$pkg.postinst configure >/dev/null 2>&1
-
- log="$log $pkg"
-
- # append the installed package name to the list
- echo -ne "$pkg\n" >> /tmp/.configured.list
-
- echo
- return 0
-}
-
-if test ! -e /etc/.configured; then
- echo "Reconfiguring all packages installed to root:"
-
- # create unique packages list file
- rm -f /tmp/.configured.list
- touch /tmp/.configured.list
-
- log=""
-
- for control in /usr/lib/ipkg/info/*.control; do
- package=`echo $control|sed -e 's,.*/,,g; s,\.control,,g;'`
- (echo $log|grep $package >/dev/null 2>&1) || reconfigure $package /usr/lib/ipkg
- done
-
- # cleanup unique packages list file
- rm -f /tmp/.configured.list
-fi
-
-test -f /usr/lib/ipkg/info/task-ramses || ipkg install task-ramses
+++ /dev/null
-#! /bin/sh
-#
-# umountfs Turn off swap and unmount all local filesystems.
-#
-
-PATH=/sbin:/bin:/usr/sbin:/usr/bin
-
-echo "Deactivating swap..."
-swapoff -a
-
-# We leave /proc mounted.
-echo "Unmounting local filesystems..."
-umount -f -a -r
-
-mount -o remount,ro /
-
-: exit 0
