imx8mn-ddr4-evk: Rework 8M Nano EVK config file

There are two variants of the 8M Nano Evaluation Kit board, one with
LPDDR4 and one with DDR4. Rework our existing config file to make
this distinction explicit in the machine config file name and to allow
for configuration re-use.

Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>

diff --git a/conf/machine/imx8mn-ddr4-evk.conf b/conf/machine/imx8mn-ddr4-evk.conf
new file mode 100644 (file)
index 0000000..c35f7e7
--- /dev/null
+++ b/conf/machine/imx8mn-ddr4-evk.conf
@@ -0,0 +1,20 @@
+#@TYPE: Machine
+#@NAME: NXP i.MX 8M Nano Evaluation Kit with DDR4
+#@SOC: i.MX8MM
+#@DESCRIPTION: Machine configuration for NXP i.MX 8M Nano EVK with DDR4
+#@MAINTAINER: Andrey Zhizhikin <andrey.z@gmail.com>
+
+require include/imx8mn-evk.inc
+
+KERNEL_DEVICETREE_BASENAME = "${MACHINE}"
+KERNEL_DEVICETREE_append_use-nxp-bsp = " \
+    freescale/${KERNEL_DEVICETREE_BASENAME}-usd-wifi.dtb \
+"
+UBOOT_CONFIG_BASENAME = "imx8mn_ddr4_evk"
+DDR_FIRMWARE_NAME = " \
+    ddr4_imem_1d_201810.bin \
+    ddr4_dmem_1d_201810.bin \
+    ddr4_imem_2d_201810.bin \
+    ddr4_dmem_2d_201810.bin \
+"
+IMXBOOT_TARGETS_BASENAME = "flash_ddr4_evk"

diff --git a/conf/machine/imx8mnevk.conf b/conf/machine/imx8mnevk.conf
deleted file mode 100644 (file)
index 1571e9f..0000000
--- a/conf/machine/imx8mnevk.conf
+++ /dev/null
@@ -1,76 +0,0 @@
-#@TYPE: Machine
-#@NAME: NXP i.MX8M Nano DDR4 Evaluation Kit
-#@SOC: i.MX8MM
-#@DESCRIPTION: Machine configuration for NXP i.MX8M Nano DDR4 EVK
-#@MAINTAINER: Andrey Zhizhikin <andrey.z@gmail.com>
-
-MACHINEOVERRIDES =. "mx8:mx8m:mx8mn:"
-
-require conf/machine/include/imx-base.inc
-require conf/machine/include/tune-cortexa53.inc
-
-MACHINE_FEATURES += "wifi bluetooth optee bcm43455 bcm4356"
-
-# NXP BSP can consume proprietary jailhouse and Broadcom drivers
-MACHINE_FEATURES_append_use-nxp-bsp = " jailhouse bcm4359"
-
-# Mainline kernel contains only two DTB file for
-# imx8mnevk machine
-KERNEL_DEVICETREE = " \
-       freescale/imx8mn-ddr4-evk.dtb \
-       freescale/imx8mn-evk.dtb \
-"
-
-KERNEL_DEVICETREE_append_use-nxp-bsp = " \
-       freescale/imx8mn-ddr4-evk-ak5558.dtb \
-       freescale/imx8mn-ddr4-evk-inmate.dtb \
-       freescale/imx8mn-ddr4-evk-rm67191.dtb \
-       freescale/imx8mn-ddr4-evk-root.dtb \
-       freescale/imx8mn-ddr4-evk-rpmsg.dtb \
-       freescale/imx8mn-ddr4-evk-usd-wifi.dtb \
-       freescale/imx8mn-evk-ak5558.dtb \
-       freescale/imx8mn-evk-inmate.dtb \
-       freescale/imx8mn-evk-rm67191.dtb \
-       freescale/imx8mn-evk-root.dtb \
-       freescale/imx8mn-evk-rpmsg.dtb \
-       freescale/imx8mn-evk-8mic-revE.dtb \
-"
-
-UBOOT_CONFIG ??= "sd"
-UBOOT_CONFIG[sd]      = "imx8mn_ddr4_evk_defconfig,sdcard"
-UBOOT_CONFIG[mfgtool] = "imx8mn_ddr4_evk_defconfig"
-SPL_BINARY = "spl/u-boot-spl.bin"
-
-# Set DDR FIRMWARE
-DDR_FIRMWARE_NAME = "ddr4_imem_1d_201810.bin \
-                     ddr4_dmem_1d_201810.bin \
-                     ddr4_imem_2d_201810.bin \
-                     ddr4_dmem_2d_201810.bin"
-
-# Set u-boot DTB
-UBOOT_DTB_NAME = "imx8mn-ddr4-evk.dtb"
-
-# Set ATF platform name
-ATF_PLATFORM = "imx8mn"
-
-# Set imx-mkimage boot target
-IMXBOOT_TARGETS = "${@bb.utils.contains('UBOOT_CONFIG', 'fspi', 'flash_ddr4_evk_flexspi', 'flash_ddr4_evk', d)}"
-IMX_BOOT_SOC_TARGET = "iMX8MN"
-
-# Set Serial console
-SERIAL_CONSOLES = "115200;ttymxc1"
-
-BOOT_SPACE = "65536"
-LOADADDR = ""
-UBOOT_SUFFIX = "bin"
-UBOOT_MAKE_TARGET = ""
-
-# Image boot offset as defined in section 6.1.6.1 "Primary image offset and IVT offset" of
-# i.MX 8M Nano Applications Processor Reference Manual, Rev. 0, 12/2019
-# Doc ID: IMX8MNRM
-IMX_BOOT_SEEK = "32"
-
-OPTEE_BIN_EXT = "8mn"
-
-# Add additional firmware
-MACHINE_FIRMWARE_append = " linux-firmware-ath10k"

diff --git a/conf/machine/include/imx8mn-evk.inc b/conf/machine/include/imx8mn-evk.inc
new file mode 100644 (file)
index 0000000..8e68f2f
--- /dev/null
+++ b/conf/machine/include/imx8mn-evk.inc
@@ -0,0 +1,51 @@
+MACHINEOVERRIDES =. "mx8:mx8m:mx8mn:"
+
+require conf/machine/include/imx-base.inc
+require conf/machine/include/tune-cortexa53.inc
+
+MACHINE_FEATURES += "wifi bluetooth optee bcm43455 bcm4356"
+
+# NXP BSP can consume proprietary jailhouse and Broadcom drivers
+MACHINE_FEATURES_append_use-nxp-bsp = " jailhouse bcm4359"
+
+KERNEL_DEVICETREE = " \
+       freescale/${KERNEL_DEVICETREE_BASENAME}.dtb \
+"
+KERNEL_DEVICETREE_append_use-nxp-bsp = " \
+       freescale/${KERNEL_DEVICETREE_BASENAME}-ak5558.dtb \
+       freescale/${KERNEL_DEVICETREE_BASENAME}-inmate.dtb \
+       freescale/${KERNEL_DEVICETREE_BASENAME}-rm67191.dtb \
+       freescale/${KERNEL_DEVICETREE_BASENAME}-root.dtb \
+       freescale/${KERNEL_DEVICETREE_BASENAME}-rpmsg.dtb \
+"
+UBOOT_DTB_NAME = "${KERNEL_DEVICETREE_BASENAME}.dtb"
+
+UBOOT_CONFIG ??= "sd"
+UBOOT_CONFIG[sd]      = "${UBOOT_CONFIG_BASENAME}_defconfig,sdcard"
+UBOOT_CONFIG[fspi]    = "${UBOOT_CONFIG_BASENAME}_defconfig"
+UBOOT_CONFIG[mfgtool] = "${UBOOT_CONFIG_BASENAME}_defconfig"
+
+SPL_BINARY = "spl/u-boot-spl.bin"
+
+ATF_PLATFORM = "imx8mn"
+
+IMXBOOT_TARGETS = "${@bb.utils.contains('UBOOT_CONFIG', 'fspi', '${IMXBOOT_TARGETS_BASENAME}_flexspi', '${IMXBOOT_TARGETS_BASENAME}', d)}"
+
+IMX_BOOT_SOC_TARGET = "iMX8MN"
+
+SERIAL_CONSOLES = "115200;ttymxc1"
+
+BOOT_SPACE = "65536"
+LOADADDR = ""
+UBOOT_SUFFIX = "bin"
+UBOOT_MAKE_TARGET = ""
+
+# Image boot offset as defined in section 6.1.6.1 "Primary image offset and IVT offset" of
+# i.MX 8M Nano Applications Processor Reference Manual, Rev. 0, 12/2019
+# Doc ID: IMX8MNRM
+IMX_BOOT_SEEK = "32"
+
+OPTEE_BIN_EXT = "8mn"
+
+# Add additional firmware
+MACHINE_FIRMWARE_append = " linux-firmware-ath10k"