Revert conversion for config_distro_bootcmd.h

This reverts the conversion for config_distro_bootcmd.h for mx6cuboxi
and wandboard boards.

This reverts commits 1c5e6b6f, 3d99e862, d3b78e18 and acc6bb56.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>

diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h
index d64323ec0f99fb01faa0d8c72382dcbe51cb0f95..8ddb6b7c70003eb3ded710f1726636d8d619fb63 100644 (file)
--- a/include/configs/mx6cuboxi.h
+++ b/include/configs/mx6cuboxi.h
@@ -8,7 +8,6 @@
 #ifndef __MX6CUBOXI_CONFIG_H
 #define __MX6CUBOXI_CONFIG_H
 
-#include <config_distro_defaults.h>
 #include "mx6_common.h"
 
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
@@ -78,26 +77,23 @@
 
 #define CONFIG_MXC_UART_BASE   UART1_BASE
 #define CONFIG_CONSOLE_DEV     "ttymxc0"
+#define CONFIG_MMCROOT         "/dev/mmcblk0p2"
 #define CONFIG_SYS_FSL_USDHC_NUM       1
 #define CONFIG_SYS_MMC_ENV_DEV         0       /* SDHC2 */
 
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-#ifndef CONFIG_SPL_BUILD
 #define CONFIG_EXTRA_ENV_SETTINGS \
+       "script=boot.scr\0" \
+       "image=zImage\0" \
        "fdtfile=undefined\0" \
        "fdt_addr_r=0x18000000\0" \
-       "fdt_addr=0x18000000\0" \
-       "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0"  \
-       "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
-       "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
-       "ramdisk_addr_r=0x13000000\0" \
-       "ramdiskaddr=0x13000000\0" \
-       "initrd_high=0xffffffff\0" \
-       "fdt_high=0xffffffff\0" \
+       "boot_fdt=try\0" \
        "ip_dyn=yes\0" \
        "console=" CONFIG_CONSOLE_DEV "\0" \
        "bootm_size=0x10000000\0" \
        "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
+       "mmcpart=1\0" \
+       "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
        "update_sd_firmware=" \
                "if test ${ip_dyn} = yes; then " \
                        "setenv get_cmd dhcp; " \
@@ -111,6 +107,53 @@
                                "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
                        "fi; "  \
                "fi\0" \
+       "mmcargs=setenv bootargs console=${console},${baudrate} " \
+               "root=${mmcroot}\0" \
+       "loadbootscript=" \
+               "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+       "bootscript=echo Running bootscript from mmc ...; " \
+               "source\0" \
+       "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+       "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
+       "mmcboot=echo Booting from mmc ...; " \
+               "run mmcargs; " \
+               "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+                       "if run loadfdt; then " \
+                               "bootz ${loadaddr} - ${fdt_addr_r}; " \
+                       "else " \
+                               "if test ${boot_fdt} = try; then " \
+                                       "bootz; " \
+                               "else " \
+                                       "echo WARN: Cannot load the DT; " \
+                               "fi; " \
+                       "fi; " \
+               "else " \
+                       "bootz; " \
+               "fi;\0" \
+       "netargs=setenv bootargs console=${console},${baudrate} " \
+               "root=/dev/nfs " \
+               "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+       "netboot=echo Booting from net ...; " \
+               "run netargs; " \
+               "if test ${ip_dyn} = yes; then " \
+                       "setenv get_cmd dhcp; " \
+               "else " \
+                       "setenv get_cmd tftp; " \
+               "fi; " \
+               "${get_cmd} ${image}; " \
+               "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+                       "if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
+                               "bootz ${loadaddr} - ${fdt_addr_r}; " \
+                       "else " \
+                               "if test ${boot_fdt} = try; then " \
+                                       "bootz; " \
+                               "else " \
+                                       "echo WARN: Cannot load the DT; " \
+                               "fi; " \
+                       "fi; " \
+               "else " \
+                       "bootz; " \
+               "fi;\0" \
        "findfdt="\
                "if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \
                        "setenv fdtfile imx6q-hummingboard.dtb; fi; " \
@@ -122,23 +165,20 @@
                        "setenv fdtfile imx6dl-cubox-i.dtb; fi; " \
                "if test $fdtfile = undefined; then " \
                        "echo WARNING: Could not determine dtb to use; fi; \0" \
-       BOOTENV
 
 #define CONFIG_BOOTCOMMAND \
        "run findfdt; " \
-       "run distro_bootcmd"
-
-#define BOOT_TARGET_DEVICES(func) \
-       func(MMC, mmc, 0) \
-       func(USB, usb, 0) \
-       func(PXE, pxe, na) \
-       func(DHCP, dhcp, na)
-
-#include <config_distro_bootcmd.h>
-
-#else
-#define CONFIG_EXTRA_ENV_SETTINGS
-#endif /* CONFIG_SPL_BUILD */
+       "mmc dev ${mmcdev};" \
+       "if mmc rescan; then " \
+               "if run loadbootscript; then " \
+               "run bootscript; " \
+               "else " \
+                       "if run loadimage; then " \
+                               "run mmcboot; " \
+                       "else run netboot; " \
+                       "fi; " \
+               "fi; " \
+       "else run netboot; fi"
 
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1

diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 28057d1c7bf80ca2c71d9978d56dc68779444546..9228895afc8605ca1993b5f9f8c7351392292717 100644 (file)
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -9,7 +9,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <config_distro_defaults.h>
 #include "mx6_common.h"
 
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
@@ -96,15 +95,19 @@
 
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 #define CONFIG_EXTRA_ENV_SETTINGS \
-       "console=ttymxc0,115200\0" \
+       "script=boot.scr\0" \
+       "image=zImage\0" \
+       "console=ttymxc0\0" \
        "splashpos=m,m\0" \
        "fdtfile=undefined\0" \
        "fdt_high=0xffffffff\0" \
        "initrd_high=0xffffffff\0" \
-       "fdt_addr_r=0x18000000\0" \
        "fdt_addr=0x18000000\0" \
+       "boot_fdt=try\0" \
        "ip_dyn=yes\0" \
        "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
+       "mmcpart=1\0" \
+       "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
        "update_sd_firmware_filename=u-boot.imx\0" \
        "update_sd_firmware=" \
                "if test ${ip_dyn} = yes; then " \
@@ -119,6 +122,8 @@
                                "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
                        "fi; "  \
                "fi\0" \
+       "mmcargs=setenv bootargs console=${console},${baudrate} " \
+               "root=${mmcroot}; run videoargs\0" \
        "videoargs=" \
                "setenv nextcon 0; " \
                "if hdmidet; then " \
@@ -145,6 +150,51 @@
                        "echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
                "fi; " \
                "setenv bootargs ${bootargs} ${fbmem}\0" \
+       "loadbootscript=" \
+               "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+       "bootscript=echo Running bootscript from mmc ...; " \
+               "source\0" \
+       "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+       "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \
+       "mmcboot=echo Booting from mmc ...; " \
+               "run mmcargs; " \
+               "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+                       "if run loadfdt; then " \
+                               "bootz ${loadaddr} - ${fdt_addr}; " \
+                       "else " \
+                               "if test ${boot_fdt} = try; then " \
+                                       "bootz; " \
+                               "else " \
+                                       "echo WARN: Cannot load the DT; " \
+                               "fi; " \
+                       "fi; " \
+               "else " \
+                       "bootz; " \
+               "fi;\0" \
+       "netargs=setenv bootargs console=${console},${baudrate} " \
+               "root=/dev/nfs " \
+       "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+               "netboot=echo Booting from net ...; " \
+               "run netargs; " \
+               "if test ${ip_dyn} = yes; then " \
+                       "setenv get_cmd dhcp; " \
+               "else " \
+                       "setenv get_cmd tftp; " \
+               "fi; " \
+               "${get_cmd} ${image}; " \
+               "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+                       "if ${get_cmd} ${fdt_addr} ${fdtfile}; then " \
+                               "bootz ${loadaddr} - ${fdt_addr}; " \
+                       "else " \
+                               "if test ${boot_fdt} = try; then " \
+                                       "bootz; " \
+                               "else " \
+                                       "echo WARN: Cannot load the DT; " \
+                               "fi; " \
+                       "fi; " \
+               "else " \
+                       "bootz; " \
+               "fi;\0" \
        "findfdt="\
                "if test $board_rev = MX6Q ; then " \
                        "setenv fdtfile imx6q-wandboard.dtb; fi; " \
@@ -152,25 +202,19 @@
                        "setenv fdtfile imx6dl-wandboard.dtb; fi; " \
                "if test $fdtfile = undefined; then " \
                        "echo WARNING: Could not determine dtb to use; fi; \0" \
-       "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
-       "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
-       "ramdisk_addr_r=0x13000000\0" \
-       "ramdiskaddr=0x13000000\0" \
-       "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
-       BOOTENV
-
-#define BOOT_TARGET_DEVICES(func) \
-       func(MMC, mmc, 0) \
-       func(MMC, mmc, 1) \
-       func(USB, usb, 0) \
-       func(PXE, pxe, na) \
-       func(DHCP, dhcp, na)
 
 #define CONFIG_BOOTCOMMAND \
           "run findfdt; " \
-          "run distro_bootcmd"
-
-#include <config_distro_bootcmd.h>
+          "mmc dev ${mmcdev}; if mmc rescan; then " \
+                  "if run loadbootscript; then " \
+                          "run bootscript; " \
+                  "else " \
+                          "if run loadimage; then " \
+                                  "run mmcboot; " \
+                          "else run netboot; " \
+                          "fi; " \
+                  "fi; " \
+          "else run netboot; fi"
 
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1