+++ /dev/null
-
-#
-# Patch managed by http://www.holgerschurig.de/patcher.html
-#
-
---- src/bfd/doc/Makefile.am~binutils-100_cflags_for_build.patch
-+++ src/bfd/doc/Makefile.am
-@@ -55,10 +55,10 @@
- MKDOC = chew$(EXEEXT_FOR_BUILD)
-
- $(MKDOC): chew.o
-- $(CC_FOR_BUILD) -o $(MKDOC) chew.o $(CFLAGS) $(LOADLIBES) $(LDFLAGS)
-+ $(CC_FOR_BUILD) -o $(MKDOC) chew.o $(CFLAGS_FOR_BUILD) $(LOADLIBES) $(LDFLAGS_FOR_BUILD)
-
- chew.o: chew.c
-- $(CC_FOR_BUILD) -c -I.. -I$(srcdir)/.. -I$(srcdir)/../../include -I$(srcdir)/../../intl -I../../intl $(H_CFLAGS) $(CFLAGS) $(srcdir)/chew.c
-+ $(CC_FOR_BUILD) -c -I.. -I$(srcdir)/.. -I$(srcdir)/../../include -I$(srcdir)/../../intl -I../../intl $(H_CFLAGS) $(CFLAGS_FOR_BUILD) $(srcdir)/chew.c
-
- protos: libbfd.h libcoff.h bfd.h
-
---- src/binutils/Makefile.am~binutils-100_cflags_for_build.patch
-+++ src/binutils/Makefile.am
-@@ -219,20 +219,20 @@
- ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
-
- sysinfo$(EXEEXT_FOR_BUILD): sysinfo.o syslex.o
-- $(CC_FOR_BUILD) $(CFLAGS) $(LDFLAGS) -o $@ sysinfo.o syslex.o
-+ $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.o syslex.o
-
- syslex.o: syslex.c sysinfo.h
- if [ -r syslex.c ]; then \
-- $(CC_FOR_BUILD) -c -I. $(CFLAGS) syslex.c ; \
-+ $(CC_FOR_BUILD) -c -I. $(CFLAGS_FOR_BUILD) syslex.c ; \
- else \
-- $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(CFLAGS) $(srcdir)/syslex.c ;\
-+ $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(CFLAGS_FOR_BUILD) $(srcdir)/syslex.c ;\
- fi
-
- sysinfo.o: sysinfo.c
- if [ -r sysinfo.c ]; then \
-- $(CC_FOR_BUILD) -c -I. $(CFLAGS) sysinfo.c ; \
-+ $(CC_FOR_BUILD) -c -I. $(CFLAGS_FOR_BUILD) sysinfo.c ; \
- else \
-- $(CC_FOR_BUILD) -c -I. $(CFLAGS) $(srcdir)/sysinfo.c ; \
-+ $(CC_FOR_BUILD) -c -I. $(CFLAGS_FOR_BUILD) $(srcdir)/sysinfo.c ; \
- fi
-
- # We need these for parallel make.
---- src/bfd/doc/Makefile.in~binutils-100_cflags_for_build.patch
-+++ src/bfd/doc/Makefile.in
-@@ -470,10 +470,10 @@
-
-
- $(MKDOC): chew.o
-- $(CC_FOR_BUILD) -o $(MKDOC) chew.o $(CFLAGS) $(LOADLIBES) $(LDFLAGS)
-+ $(CC_FOR_BUILD) -o $(MKDOC) chew.o $(CFLAGS_FOR_BUILD) $(LOADLIBES) $(LDFLAGS_FOR_BUILD)
-
- chew.o: chew.c
-- $(CC_FOR_BUILD) -c -I.. -I$(srcdir)/.. -I$(srcdir)/../../include -I$(srcdir)/../../intl -I../../intl $(H_CFLAGS) $(CFLAGS) $(srcdir)/chew.c
-+ $(CC_FOR_BUILD) -c -I.. -I$(srcdir)/.. -I$(srcdir)/../../include -I$(srcdir)/../../intl -I../../intl $(H_CFLAGS) $(CFLAGS_FOR_BUILD) $(srcdir)/chew.c
-
- protos: libbfd.h libcoff.h bfd.h
-
---- src/binutils/Makefile.in~binutils-100_cflags_for_build.patch
-+++ src/binutils/Makefile.in
-@@ -978,20 +978,20 @@
- ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
-
- sysinfo$(EXEEXT_FOR_BUILD): sysinfo.o syslex.o
-- $(CC_FOR_BUILD) $(CFLAGS) $(LDFLAGS) -o $@ sysinfo.o syslex.o
-+ $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.o syslex.o
-
- syslex.o: syslex.c sysinfo.h
- if [ -r syslex.c ]; then \
-- $(CC_FOR_BUILD) -c -I. $(CFLAGS) syslex.c ; \
-+ $(CC_FOR_BUILD) -c -I. $(CFLAGS_FOR_BUILD) syslex.c ; \
- else \
-- $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(CFLAGS) $(srcdir)/syslex.c ;\
-+ $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(CFLAGS_FOR_BUILD) $(srcdir)/syslex.c ;\
- fi
-
- sysinfo.o: sysinfo.c
- if [ -r sysinfo.c ]; then \
-- $(CC_FOR_BUILD) -c -I. $(CFLAGS) sysinfo.c ; \
-+ $(CC_FOR_BUILD) -c -I. $(CFLAGS_FOR_BUILD) sysinfo.c ; \
- else \
-- $(CC_FOR_BUILD) -c -I. $(CFLAGS) $(srcdir)/sysinfo.c ; \
-+ $(CC_FOR_BUILD) -c -I. $(CFLAGS_FOR_BUILD) $(srcdir)/sysinfo.c ; \
- fi
-
- # We need these for parallel make.
+++ /dev/null
-Fix found here: http://www.freelists.org/archives/openbeos/11-2005/msg00090.html
-
-Fixes:
-In file included from ./targ-cpu.h:1,
- from /home/dank/crosstool-new/build/i686-unknown-linux-gnu/gcc-2.95.3-glibc-2.2.2/binutils-2.15/gas/config/obj-elf.h:42,
- from ./obj-format.h:1,
- from /home/dank/crosstool-new/build/i686-unknown-linux-gnu/gcc-2.95.3-glibc-2.2.2/binutils-2.15/gas/config/te-linux.h:4,
- from ./targ-env.h:1,
- from /home/dank/crosstool-new/build/i686-unknown-linux-gnu/gcc-2.95.3-glibc-2.2.2/binutils-2.15/gas/as.h:626,
- from /home/dank/crosstool-new/build/i686-unknown-linux-gnu/gcc-2.95.3-glibc-2.2.2/binutils-2.15/gas/app.c:30:
-/home/dank/crosstool-new/build/i686-unknown-linux-gnu/gcc-2.95.3-glibc-2.2.2/binutils-2.15/gas/config/tc-i386.h:451: error: array type has incomplete element type
-make[3]: *** [app.o] Error 1
-make[3]: Leaving directory `/home/dank/crosstool-new/build/i686-unknown-linux-gnu/gcc-2.95.3-glibc-2.2.2/build-binutils/gas'
-
-when building binutils-2.15 with gcc-4.0
-
-
-diff -ur binutils-2.15.old/gas/as.h binutils-2.15/gas/as.h
---- binutils-2.15.old/gas/as.h 2003-11-22 18:14:21.000000000 -0800
-+++ binutils-2.15/gas/as.h 2006-02-14 22:05:35.000000000 -0800
-@@ -605,7 +605,26 @@
- struct expressionS;
- struct fix;
- typedef struct symbol symbolS;
--struct relax_type;
-+
-+/* JF moved this here from as.h under the theory that nobody except MACHINE.c
-+ and write.c care about it anyway. */
-+/* [zooey]: the above no longer holds with gcc4, as it keeps bugging about
-+ incomplete element types in arrays, if relax_type isn't defined
-+ here. So I moved the definition back from tc.h to here. */
-+struct relax_type
-+{
-+ /* Forward reach. Signed number. > 0. */
-+ long rlx_forward;
-+ /* Backward reach. Signed number. < 0. */
-+ long rlx_backward;
-+
-+ /* Bytes length of this address. */
-+ unsigned char rlx_length;
-+
-+ /* Next longer relax-state. 0 means there is no 'next' relax-state. */
-+ relax_substateT rlx_more;
-+};
-+
- typedef struct frag fragS;
-
- #ifdef BFD_ASSEMBLER
-diff -ur binutils-2.15.old/gas/tc.h binutils-2.15/gas/tc.h
---- binutils-2.15.old/gas/tc.h 2003-12-03 15:39:38.000000000 -0800
-+++ binutils-2.15/gas/tc.h 2006-02-14 22:03:35.000000000 -0800
-@@ -24,23 +24,6 @@
-
- extern const pseudo_typeS md_pseudo_table[];
-
--/* JF moved this here from as.h under the theory that nobody except MACHINE.c
-- and write.c care about it anyway. */
--
--struct relax_type
--{
-- /* Forward reach. Signed number. > 0. */
-- long rlx_forward;
-- /* Backward reach. Signed number. < 0. */
-- long rlx_backward;
--
-- /* Bytes length of this address. */
-- unsigned char rlx_length;
--
-- /* Next longer relax-state. 0 means there is no 'next' relax-state. */
-- relax_substateT rlx_more;
--};
--
- typedef struct relax_type relax_typeS;
-
- extern const int md_reloc_size; /* Size of a relocation record */
+++ /dev/null
-
-#
-# Patch managed by http://www.holgerschurig.de/patcher.html
-#
-
---- src/configure~binutils-2.15.90.0.3-uclibc-200-build_modules.patch
-+++ src/configure
-@@ -940,6 +940,11 @@
- build_configdirs=`echo ${build_libs} ${build_tools}`
- fi
-
-+case "$target" in
-+ *-*-*-uclibc*)
-+ build_modules=
-+ ;;
-+esac
- ################################################################################
-
- srcname="gnu development package"
---- src/configure.in~binutils-2.15.90.0.3-uclibc-200-build_modules.patch
-+++ src/configure.in
-@@ -189,6 +189,11 @@
- build_configdirs=`echo ${build_libs} ${build_tools}`
- fi
-
-+case "$target" in
-+ *-*-*-uclibc*)
-+ build_modules=
-+ ;;
-+esac
- ################################################################################
-
- srcname="gnu development package"
+++ /dev/null
---- binutils-2.15.90.0.3/bfd/doc/Makefile.am.cflags 2004-01-14 16:07:44.000000000 -0500
-+++ binutils-2.15.90.0.3/bfd/doc/Makefile.am 2004-04-22 22:06:35.000000000 -0400
-@@ -55,10 +55,10 @@
- MKDOC = chew$(EXEEXT_FOR_BUILD)
-
- $(MKDOC): chew.o
-- $(CC_FOR_BUILD) -o $(MKDOC) chew.o $(CFLAGS) $(LOADLIBES) $(LDFLAGS)
-+ $(CC_FOR_BUILD) -o $(MKDOC) chew.o $(CFLAGS_FOR_BUILD) $(LOADLIBES) $(LDFLAGS)
-
- chew.o: chew.c
-- $(CC_FOR_BUILD) -c -I.. -I$(srcdir)/.. -I$(srcdir)/../../include -I$(srcdir)/../../intl -I../../intl $(H_CFLAGS) $(CFLAGS) $(srcdir)/chew.c
-+ $(CC_FOR_BUILD) -c -I.. -I$(srcdir)/.. -I$(srcdir)/../../include -I$(srcdir)/../../intl -I../../intl $(H_CFLAGS) $(CFLAGS_FOR_BUILD) $(srcdir)/chew.c
-
- protos: libbfd.h libcoff.h bfd.h
-
---- binutils-2.15.90.0.3/bfd/doc/Makefile.in.cflags 2004-04-12 15:56:34.000000000 -0400
-+++ binutils-2.15.90.0.3/bfd/doc/Makefile.in 2004-04-22 22:06:35.000000000 -0400
-@@ -472,10 +472,10 @@
-
-
- $(MKDOC): chew.o
-- $(CC_FOR_BUILD) -o $(MKDOC) chew.o $(CFLAGS) $(LOADLIBES) $(LDFLAGS)
-+ $(CC_FOR_BUILD) -o $(MKDOC) chew.o $(CFLAGS_FOR_BUILD) $(LOADLIBES) $(LDFLAGS)
-
- chew.o: chew.c
-- $(CC_FOR_BUILD) -c -I.. -I$(srcdir)/.. -I$(srcdir)/../../include -I$(srcdir)/../../intl -I../../intl $(H_CFLAGS) $(CFLAGS) $(srcdir)/chew.c
-+ $(CC_FOR_BUILD) -c -I.. -I$(srcdir)/.. -I$(srcdir)/../../include -I$(srcdir)/../../intl -I../../intl $(H_CFLAGS) $(CFLAGS_FOR_BUILD) $(srcdir)/chew.c
-
- protos: libbfd.h libcoff.h bfd.h
-
+++ /dev/null
-
-#
-# Patch managed by http://www.holgerschurig.de/patcher.html
-#
-
---- binutils-2.15.94.0.1/bfd/config.bfd~binutils-2.15.91.0.1-uclibc-100-conf
-+++ binutils-2.15.94.0.1/bfd/config.bfd
-@@ -140,7 +140,7 @@
- targ_defvec=ecoffalpha_little_vec
- targ_selvecs=bfd_elf64_alpha_vec
- ;;
-- alpha*-*-linux-gnu* | alpha*-*-elf*)
-+ alpha*-*-linux-gnu* | alpha*-*-linux-uclibc* | alpha*-*-elf*)
- targ_defvec=bfd_elf64_alpha_vec
- targ_selvecs=ecoffalpha_little_vec
- ;;
-@@ -150,7 +150,7 @@
- alpha*-*-*)
- targ_defvec=ecoffalpha_little_vec
- ;;
-- ia64*-*-freebsd* | ia64*-*-netbsd* | ia64*-*-linux-gnu* | ia64*-*-elf* | ia64*-*-kfreebsd*-gnu)
-+ ia64*-*-freebsd* | ia64*-*-netbsd* | ia64*-*-linux-gnu* | ia64*-*-elf* | ia64*-*-linux-uclibc* | ia64*-*-kfreebsd*-gnu)
- targ_defvec=bfd_elf64_ia64_little_vec
- targ_selvecs="bfd_elf64_ia64_big_vec bfd_efi_app_ia64_vec"
- ;;
-@@ -227,7 +227,7 @@
- targ_defvec=bfd_elf32_littlearm_vec
- targ_selvecs=bfd_elf32_bigarm_vec
- ;;
-- armeb-*-elf | arm*b-*-linux-gnu*)
-+ armeb-*-elf | arm*b-*-linux-gnu* | arm*b-*-linux-uclibc*)
- targ_defvec=bfd_elf32_bigarm_vec
- targ_selvecs=bfd_elf32_littlearm_vec
- ;;
-@@ -237,7 +237,7 @@
- ;;
- arm-*-elf | arm-*-freebsd* | arm*-*-linux-gnu* | arm*-*-conix* | \
- arm*-*-uclinux* | arm-*-kfreebsd*-gnu | arm-*-vxworks | \
-- arm*-*-eabi* )
-+ arm*-*-eabi* | arm*-*-linux-uclibc* )
- targ_defvec=bfd_elf32_littlearm_vec
- targ_selvecs=bfd_elf32_bigarm_vec
- ;;
-@@ -381,7 +381,7 @@
- ;;
-
- #ifdef BFD64
-- hppa*64*-*-linux-gnu*)
-+ hppa*64*-*-linux-gnu* | hppa*64*-*-linux-uclibc*)
- targ_defvec=bfd_elf64_hppa_linux_vec
- targ_selvecs=bfd_elf64_hppa_vec
- ;;
-@@ -392,7 +392,7 @@
- ;;
- #endif
-
-- hppa*-*-linux-gnu*)
-+ hppa*-*-linux-gnu* | hppa*-*-linux-uclibc*)
- targ_defvec=bfd_elf32_hppa_linux_vec
- targ_selvecs=bfd_elf32_hppa_vec
- ;;
-@@ -525,7 +525,7 @@
- targ_selvecs=bfd_elf32_i386_vec
- targ_underscore=yes
- ;;
-- i[3-7]86-*-linux-gnu*)
-+ i[3-7]86-*-linux-gnu* | i[3-7]86-*-linux-uclibc*)
- targ_defvec=bfd_elf32_i386_vec
- targ_selvecs="i386linux_vec bfd_efi_app_ia32_vec"
- targ64_selvecs=bfd_elf64_x86_64_vec
-@@ -539,7 +539,7 @@
- targ_defvec=bfd_elf64_x86_64_vec
- targ_selvecs="bfd_elf32_i386_vec i386netbsd_vec i386coff_vec bfd_efi_app_ia32_vec"
- ;;
-- x86_64-*-linux-gnu*)
-+ x86_64-*-linux-gnu* | x86_64-*-linux-uclibc*)
- targ_defvec=bfd_elf64_x86_64_vec
- targ_selvecs="bfd_elf32_i386_vec i386linux_vec bfd_efi_app_ia32_vec"
- ;;
-@@ -715,7 +715,7 @@
- targ_selvecs=bfd_elf32_m68k_vec
- targ_underscore=yes
- ;;
-- m68*-*-linux-gnu*)
-+ m68*-*-linux-gnu* | m68*-*-linux-uclibc*)
- targ_defvec=bfd_elf32_m68k_vec
- targ_selvecs=m68klinux_vec
- ;;
-@@ -1001,7 +1001,8 @@
- ;;
- #endif
- powerpc-*-*bsd* | powerpc-*-elf* | powerpc-*-sysv4* | powerpc-*-eabi* | \
-- powerpc-*-solaris2* | powerpc-*-linux-gnu* | powerpc-*-rtems* | \
-+ powerpc-*-solaris2* | powerpc-*-linux-gnu* | powerpc-*-linux-uclibc* | \
-+ powerpc-*-rtems* | \
- powerpc-*-chorus* | powerpc-*-vxworks* | powerpc-*-windiss*)
- targ_defvec=bfd_elf32_powerpc_vec
- targ_selvecs="rs6000coff_vec bfd_elf32_powerpcle_vec ppcboot_vec"
-@@ -1038,8 +1039,8 @@
- targ_selvecs="rs6000coff_vec bfd_elf32_powerpc_vec ppcboot_vec"
- ;;
- powerpcle-*-elf* | powerpcle-*-sysv4* | powerpcle-*-eabi* | \
-- powerpcle-*-solaris2* | powerpcle-*-linux-gnu* | powerpcle-*-vxworks* |\
-- powerpcle-*-rtems*)
-+ powerpcle-*-solaris2* | powerpcle-*-linux-gnu* | powerpcle-*-linux-uclibc* |\
-+ powerpcle-*-vxworks* | powerpcle-*-rtems*)
- targ_defvec=bfd_elf32_powerpcle_vec
- targ_selvecs="rs6000coff_vec bfd_elf32_powerpc_vec ppcboot_vec"
- targ64_selvecs="bfd_elf64_powerpc_vec bfd_elf64_powerpcle_vec"
-@@ -1206,7 +1207,7 @@
- targ_selvecs="bfd_elf32_sparc_vec sunos_big_vec"
- targ_underscore=yes
- ;;
-- sparc-*-linux-gnu*)
-+ sparc-*-linux-gnu* | sparc-*-linux-uclibc*)
- targ_defvec=bfd_elf32_sparc_vec
- targ_selvecs="sparclinux_vec bfd_elf64_sparc_vec sunos_big_vec"
- ;;
-@@ -1253,7 +1254,7 @@
- targ_defvec=sunos_big_vec
- targ_underscore=yes
- ;;
-- sparc64-*-linux-gnu*)
-+ sparc64-*-linux-gnu* | sparc64-*-linux-uclibc*)
- targ_defvec=bfd_elf64_sparc_vec
- targ_selvecs="bfd_elf32_sparc_vec sparclinux_vec sunos_big_vec"
- ;;
---- binutils-2.15.94.0.1/bfd/configure~binutils-2.15.91.0.1-uclibc-100-conf
-+++ binutils-2.15.94.0.1/bfd/configure
-@@ -3583,6 +3583,11 @@
- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
- ;;
-
-+linux-uclibc*)
-+ lt_cv_deplibs_check_method=pass_all
-+ lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+ ;;
-+
- netbsd* | knetbsd*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-@@ -9914,7 +9919,7 @@
- alpha*-*-freebsd* | alpha*-*-kfreebsd*-gnu)
- COREFILE=''
- ;;
-- alpha*-*-linux-gnu*)
-+ alpha*-*-linux-gnu* | alpha*-*-linux-uclibc*)
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/alphalinux.h"'
- ;;
-@@ -9978,7 +9983,7 @@
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/i386mach3.h"'
- ;;
-- i[3-7]86-*-linux-gnu*)
-+ i[3-7]86-*-linux-gnu* | i[3-7]86-*-linux-uclibc*)
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/i386linux.h"'
- ;;
-@@ -10016,7 +10021,7 @@
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/hp300bsd.h"'
- ;;
-- m68*-*-linux-gnu*)
-+ m68*-*-linux-gnu* | m68*-*-linux-uclibc*)
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/m68klinux.h"'
- ;;
---- binutils-2.15.94.0.1/bfd/configure.in~binutils-2.15.91.0.1-uclibc-100-conf
-+++ binutils-2.15.94.0.1/bfd/configure.in
-@@ -163,7 +163,7 @@
- alpha*-*-freebsd* | alpha*-*-kfreebsd*-gnu)
- COREFILE=''
- ;;
-- alpha*-*-linux-gnu*)
-+ alpha*-*-linux-gnu* | alpha*-*-linux-uclibc*)
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/alphalinux.h"'
- ;;
-@@ -248,7 +248,7 @@
- TRAD_HEADER='"hosts/i386mach3.h"'
- ;;
- changequote(,)dnl
-- i[3-7]86-*-linux-gnu*)
-+ i[3-7]86-*-linux-gnu* | i[3-7]86-*-linux-uclibc*)
- changequote([,])dnl
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/i386linux.h"'
-@@ -289,7 +289,7 @@
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/hp300bsd.h"'
- ;;
-- m68*-*-linux-gnu*)
-+ m68*-*-linux-gnu* | m68*-*-linux-uclibc*)
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/m68klinux.h"'
- ;;
---- binutils-2.15.94.0.1/gas/configure~binutils-2.15.91.0.1-uclibc-100-conf
-+++ binutils-2.15.94.0.1/gas/configure
-@@ -3420,6 +3420,11 @@
- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
- ;;
-
-+linux-uclibc*)
-+ lt_cv_deplibs_check_method=pass_all
-+ lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+ ;;
-+
- netbsd* | knetbsd*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-@@ -4256,6 +4261,7 @@
- alpha*-*-osf*) fmt=ecoff ;;
- alpha*-*-linuxecoff*) fmt=ecoff ;;
- alpha*-*-linux-gnu*) fmt=elf em=linux ;;
-+ alpha*-*-linux-uclibc*) fmt=elf em=linux ;;
- alpha*-*-netbsd*) fmt=elf em=nbsd ;;
- alpha*-*-openbsd*) fmt=elf em=obsd ;;
-
-@@ -4271,6 +4277,7 @@
- arm*-*-conix*) fmt=elf ;;
- arm-*-linux*aout*) fmt=aout em=linux ;;
- arm*-*-linux-gnu*) fmt=elf em=linux ;;
-+ arm*-*-linux-uclibc*) fmt=elf em=linux ;;
- arm*-*-uclinux*) fmt=elf em=linux ;;
- arm-*-netbsdelf*) fmt=elf em=nbsd ;;
- arm-*-*n*bsd*) fmt=aout em=nbsd ;;
-@@ -4284,6 +4291,7 @@
-
- cris-*-linux-gnu* | crisv32-*-linux-gnu*)
- fmt=multi bfd_gas=yes em=linux ;;
-+ cris-*-linux-uclibc*) fmt=multi bfd_gas=yes em=linux ;;
- cris-*-* | crisv32-*-*) fmt=multi bfd_gas=yes ;;
-
- crx-*-elf*) fmt=elf ;;
-@@ -4343,7 +4351,9 @@
- i386-*-linux*oldld) fmt=aout em=linux ;;
- i386-*-linux*coff*) fmt=coff em=linux ;;
- i386-*-linux-gnu*) fmt=elf em=linux ;;
-+ i386-*-linux-uclibc*) fmt=elf em=linux ;;
- x86_64-*-linux-gnu*) fmt=elf em=linux ;;
-+ x86_64-*-linux-uclibc*) fmt=elf em=linux ;;
- i386-*-lynxos*) fmt=elf em=lynx bfd_gas=yes ;;
- i386-*-sysv[45]*) fmt=elf ;;
- i386-*-solaris*) fmt=elf ;;
-@@ -4403,6 +4413,7 @@
- ia64-*-elf*) fmt=elf ;;
- ia64-*-aix*) fmt=elf em=ia64aix ;;
- ia64-*-linux-gnu*) fmt=elf em=linux ;;
-+ ia64-*-linux-uclibc*) fmt=elf em=linux ;;
- ia64-*-hpux*) fmt=elf em=hpux ;;
- ia64-*-netbsd*) fmt=elf em=nbsd ;;
-
-@@ -4430,6 +4441,7 @@
- m68k-*-hpux*) fmt=hp300 em=hp300 ;;
- m68k-*-linux*aout*) fmt=aout em=linux ;;
- m68k-*-linux-gnu*) fmt=elf em=linux ;;
-+ m68k-*-linux-uclibc*) fmt=elf em=linux ;;
- m68k-*-uclinux*) fmt=elf ;;
- m68k-*-gnu*) fmt=elf ;;
- m68k-*-lynxos*) fmt=coff em=lynx ;;
-@@ -4504,7 +4516,7 @@
- ppc-*-beos*) fmt=coff ;;
- ppc-*-*n*bsd* | ppc-*-elf*) fmt=elf ;;
- ppc-*-eabi* | ppc-*-sysv4*) fmt=elf ;;
-- ppc-*-linux-gnu*) fmt=elf em=linux
-+ ppc-*-linux-uclibc* | ppc-*-linux-gnu*) fmt=elf em=linux
- case "$endian" in
- big) ;;
- *) { { echo "$as_me:$LINENO: error: GNU/Linux must be configured big endian" >&5
-@@ -4531,7 +4543,9 @@
- ppc-*-lynxos*) fmt=elf em=lynx bfd_gas=yes ;;
-
- s390x-*-linux-gnu*) fmt=elf em=linux ;;
-+ s390x-*-linux-uclibc*) fmt=elf em=linux ;;
- s390-*-linux-gnu*) fmt=elf em=linux ;;
-+ s390-*-linux-uclibc*) fmt=elf em=linux ;;
-
- sh*-*-linux*) fmt=elf em=linux
- case ${cpu} in
-@@ -4566,6 +4580,7 @@
- sparc-*-coff) fmt=coff ;;
- sparc-*-linux*aout*) fmt=aout em=linux ;;
- sparc-*-linux-gnu*) fmt=elf em=linux ;;
-+ sparc-*-linux-uclibc*) fmt=elf em=linux ;;
- sparc-*-lynxos*) fmt=coff em=lynx ;;
- sparc-fujitsu-none) fmt=aout ;;
- sparc-*-elf) fmt=elf ;;
---- binutils-2.15.94.0.1/gas/configure.in~binutils-2.15.91.0.1-uclibc-100-conf
-+++ binutils-2.15.94.0.1/gas/configure.in
-@@ -202,6 +202,7 @@
- alpha*-*-osf*) fmt=ecoff ;;
- alpha*-*-linuxecoff*) fmt=ecoff ;;
- alpha*-*-linux-gnu*) fmt=elf em=linux ;;
-+ alpha*-*-linux-uclibc*) fmt=elf em=linux ;;
- alpha*-*-netbsd*) fmt=elf em=nbsd ;;
- alpha*-*-openbsd*) fmt=elf em=obsd ;;
-
-@@ -217,6 +218,7 @@
- arm*-*-conix*) fmt=elf ;;
- arm-*-linux*aout*) fmt=aout em=linux ;;
- arm*-*-linux-gnu*) fmt=elf em=linux ;;
-+ arm*-*-linux-uclibc*) fmt=elf em=linux ;;
- arm*-*-uclinux*) fmt=elf em=linux ;;
- arm-*-netbsdelf*) fmt=elf em=nbsd ;;
- arm-*-*n*bsd*) fmt=aout em=nbsd ;;
-@@ -230,6 +232,7 @@
-
- cris-*-linux-gnu* | crisv32-*-linux-gnu*)
- fmt=multi bfd_gas=yes em=linux ;;
-+ cris-*-linux-uclibc*) fmt=multi bfd_gas=yes em=linux ;;
- cris-*-* | crisv32-*-*) fmt=multi bfd_gas=yes ;;
-
- crx-*-elf*) fmt=elf ;;
-@@ -289,7 +292,9 @@
- i386-*-linux*oldld) fmt=aout em=linux ;;
- i386-*-linux*coff*) fmt=coff em=linux ;;
- i386-*-linux-gnu*) fmt=elf em=linux ;;
-+ i386-*-linux-uclibc*) fmt=elf em=linux ;;
- x86_64-*-linux-gnu*) fmt=elf em=linux ;;
-+ x86_64-*-linux-uclibc*) fmt=elf em=linux ;;
- i386-*-lynxos*) fmt=elf em=lynx bfd_gas=yes ;;
- changequote(,)dnl
- i386-*-sysv[45]*) fmt=elf ;;
-@@ -342,6 +347,7 @@
- ia64-*-elf*) fmt=elf ;;
- ia64-*-aix*) fmt=elf em=ia64aix ;;
- ia64-*-linux-gnu*) fmt=elf em=linux ;;
-+ ia64-*-linux-uclibc*) fmt=elf em=linux ;;
- ia64-*-hpux*) fmt=elf em=hpux ;;
- ia64-*-netbsd*) fmt=elf em=nbsd ;;
-
-@@ -369,6 +375,7 @@
- m68k-*-hpux*) fmt=hp300 em=hp300 ;;
- m68k-*-linux*aout*) fmt=aout em=linux ;;
- m68k-*-linux-gnu*) fmt=elf em=linux ;;
-+ m68k-*-linux-uclibc*) fmt=elf em=linux ;;
- m68k-*-uclinux*) fmt=elf ;;
- m68k-*-gnu*) fmt=elf ;;
- m68k-*-lynxos*) fmt=coff em=lynx ;;
-@@ -440,7 +447,7 @@
- ppc-*-beos*) fmt=coff ;;
- ppc-*-*n*bsd* | ppc-*-elf*) fmt=elf ;;
- ppc-*-eabi* | ppc-*-sysv4*) fmt=elf ;;
-- ppc-*-linux-gnu*) fmt=elf em=linux
-+ ppc-*-linux-uclibc* | ppc-*-linux-gnu*) fmt=elf em=linux
- case "$endian" in
- big) ;;
- *) AC_MSG_ERROR(GNU/Linux must be configured big endian) ;;
-@@ -460,7 +467,9 @@
- ppc-*-lynxos*) fmt=elf em=lynx bfd_gas=yes ;;
-
- s390x-*-linux-gnu*) fmt=elf em=linux ;;
-+ s390x-*-linux-uclibc*) fmt=elf em=linux ;;
- s390-*-linux-gnu*) fmt=elf em=linux ;;
-+ s390-*-linux-uclibc*) fmt=elf em=linux ;;
-
- sh*-*-linux*) fmt=elf em=linux
- case ${cpu} in
-@@ -491,6 +500,7 @@
- sparc-*-coff) fmt=coff ;;
- sparc-*-linux*aout*) fmt=aout em=linux ;;
- sparc-*-linux-gnu*) fmt=elf em=linux ;;
-+ sparc-*-linux-uclibc*) fmt=elf em=linux ;;
- sparc-*-lynxos*) fmt=coff em=lynx ;;
- sparc-fujitsu-none) fmt=aout ;;
- sparc-*-elf) fmt=elf ;;
---- binutils-2.15.94.0.1/ld/configure~binutils-2.15.91.0.1-uclibc-100-conf
-+++ binutils-2.15.94.0.1/ld/configure
-@@ -1579,6 +1579,11 @@
- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
- ;;
-
-+linux-uclibc*)
-+ lt_cv_deplibs_check_method=pass_all
-+ lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+ ;;
-+
- netbsd* | knetbsd*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
---- binutils-2.15.94.0.1/ld/configure.tgt~binutils-2.15.91.0.1-uclibc-100-conf
-+++ binutils-2.15.94.0.1/ld/configure.tgt
-@@ -32,6 +32,7 @@
- targ_extra_libpath=$targ_extra_emuls ;;
- cris-*-linux-gnu* | cris-*-linux-gnu*)
- targ_emul=crislinux ;;
-+cris-*-linux-uclibc*) targ_emul=crislinux ;;
- cris-*-* | crisv32-*-*) targ_emul=criself
- targ_extra_emuls="crisaout crislinux"
- targ_extra_libpath=$targ_extra_emuls ;;
-@@ -62,14 +63,16 @@
- tdir_elf32_sparc=`echo ${targ_alias} | sed -e 's/aout//'`
- tdir_sun4=sparc-sun-sunos4
- ;;
--sparc64-*-linux-gnu*) targ_emul=elf64_sparc
-+sparc64-*-linux-gnu* | sparc64-*-linux-uclibc*) \
-+ targ_emul=elf64_sparc
- targ_extra_emuls="elf32_sparc sparclinux sun4"
- targ_extra_libpath=elf32_sparc
- tdir_elf32_sparc=`echo ${targ_alias} | sed -e 's/64//'`
- tdir_sparclinux=${tdir_elf32_sparc}aout
- tdir_sun4=sparc-sun-sunos4
- ;;
--sparc*-*-linux-gnu*) targ_emul=elf32_sparc
-+sparc*-*-linux-gnu* | sparc*-*-linux-uclibc*) \
-+ targ_emul=elf32_sparc
- targ_extra_emuls="sparclinux elf64_sparc sun4"
- targ_extra_libpath=elf64_sparc
- tdir_sparclinux=${targ_alias}aout
-@@ -132,7 +135,7 @@
- m68*-apple-aux*) targ_emul=m68kaux ;;
- maxq-*-coff) targ_emul=maxqcoff;;
- *-tandem-none) targ_emul=st2000 ;;
--i370-*-elf* | i370-*-linux-gnu*) targ_emul=elf32i370 ;;
-+i370-*-elf* | i370-*-linux-gnu* | i370-*-linux-uclibc*) targ_emul=elf32i370 ;;
- i[3-7]86-*-nto-qnx*) targ_emul=i386nto ;;
- i[3-7]86-*-vsta) targ_emul=vsta ;;
- i[3-7]86-go32-rtems*) targ_emul=i386go32 ;;
-@@ -156,14 +159,16 @@
- tdir_elf_i386=`echo ${targ_alias} | sed -e 's/aout//'`
- ;;
- i[3-7]86-*-linux*oldld) targ_emul=i386linux; targ_extra_emuls=elf_i386 ;;
--i[3-7]86-*-linux-gnu*) targ_emul=elf_i386
-+i[3-7]86-*-linux-gnu* | i[3-7]86-*-linux-uclibc*) \
-+ targ_emul=elf_i386
- targ_extra_emuls=i386linux
- if test x${want64} = xtrue; then
- targ_extra_emuls="$targ_extra_emuls elf_x86_64"
- fi
- tdir_i386linux=${targ_alias}aout
- ;;
--x86_64-*-linux-gnu*) targ_emul=elf_x86_64
-+x86_64-*-linux-gnu* | x86_64-*-linux-uclibc*) \
-+ targ_emul=elf_x86_64
- targ_extra_emuls="elf_i386 i386linux"
- targ_extra_libpath=elf_i386
- tdir_i386linux=`echo ${targ_alias}aout | sed -e 's/x86_64/i386/'`
-@@ -263,11 +268,14 @@
- arm-*-kaos*) targ_emul=armelf ;;
- arm9e-*-elf) targ_emul=armelf ;;
- arm*b-*-linux-gnu*) targ_emul=armelfb_linux; targ_extra_emuls=armelfb ;;
-+arm*b-*-linux-uclibc*) targ_emul=armelfb_linux; targ_extra_emuls=armelfb ;;
- arm*-*-linux-gnueabi) targ_emul=armelf_linux_eabi ;;
- arm*-*-linux-gnu*) targ_emul=armelf_linux; targ_extra_emuls=armelf ;;
-+arm*-*-linux-uclibc*) targ_emul=armelf_linux; targ_extra_emuls=armelf ;;
- arm*-*-uclinux*) targ_emul=armelf_linux; targ_extra_emuls=armelf ;;
- arm*-*-conix*) targ_emul=armelf ;;
--thumb-*-linux-gnu* | thumb-*-uclinux*) targ_emul=armelf_linux; targ_extra_emuls=armelf ;;
-+thumb-*-linux-gnu* | thumb-*-linux-uclibc* | thumb-*-uclinux*)
-+ targ_emul=armelf_linux; targ_extra_emuls=armelf ;;
- strongarm-*-coff) targ_emul=armcoff ;;
- strongarm-*-elf) targ_emul=armelf ;;
- strongarm-*-kaos*) targ_emul=armelf ;;
-@@ -371,7 +379,8 @@
- targ_extra_emuls=m68kelf
- tdir_m68kelf=`echo ${targ_alias} | sed -e 's/aout//'`
- ;;
--m68k-*-linux-gnu*) targ_emul=m68kelf
-+m68k-*-linux-gnu* | m68k-*-linux-uclibc*) \
-+ targ_emul=m68kelf
- targ_extra_emuls=m68klinux
- tdir_m68klinux=`echo ${targ_alias} | sed -e 's/linux/linuxaout/'`
- ;;
-@@ -388,9 +397,9 @@
- m68*-*-psos*) targ_emul=m68kpsos ;;
- m68*-*-rtemscoff*) targ_emul=m68kcoff ;;
- m68*-*-rtems*) targ_emul=m68kelf ;;
--hppa*64*-*-linux-gnu*) targ_emul=hppa64linux ;;
-+hppa*64*-*-linux-gnu* | hppa*64*-*-linux-uclibc*) targ_emul=hppa64linux ;;
- hppa*64*-*) targ_emul=elf64hppa ;;
--hppa*-*-linux-gnu*) targ_emul=hppalinux ;;
-+hppa*-*-linux-gnu* | hppa*-*-linux-uclibc*) targ_emul=hppalinux ;;
- hppa*-*-*elf*) targ_emul=hppaelf ;;
- hppa*-*-lites*) targ_emul=hppaelf ;;
- hppa*-*-netbsd*) targ_emul=hppanbsd ;;
-@@ -436,16 +445,20 @@
- mips*-*-vxworks*) targ_emul=elf32ebmip
- targ_extra_emuls="elf32elmip" ;;
- mips*-*-windiss) targ_emul=elf32mipswindiss ;;
--mips64*el-*-linux-gnu*) targ_emul=elf32ltsmipn32
-+mips64*el-*-linux-gnu* | mips64*el-*-linux-uclibc*)
-+ targ_emul=elf32ltsmipn32
- targ_extra_emuls="elf32btsmipn32 elf32ltsmip elf32btsmip elf64ltsmip elf64btsmip"
- ;;
--mips64*-*-linux-gnu*) targ_emul=elf32btsmipn32
-+mips64*-*-linux-gnu* | mips64*-*-linux-uclibc*)
-+ targ_emul=elf32btsmipn32
- targ_extra_emuls="elf32ltsmipn32 elf32btsmip elf32ltsmip elf64btsmip elf64ltsmip"
- ;;
--mips*el-*-linux-gnu*) targ_emul=elf32ltsmip
-+mips*el-*-linux-gnu* | mips*el-*-linux-uclibc*)
-+ targ_emul=elf32ltsmip
- targ_extra_emuls="elf32btsmip elf32ltsmipn32 elf64ltsmip elf32btsmipn32 elf64btsmip"
- ;;
--mips*-*-linux-gnu*) targ_emul=elf32btsmip
-+mips*-*-linux-gnu* | mips*-*-linux-uclibc*)
-+ targ_emul=elf32btsmip
- targ_extra_emuls="elf32ltsmip elf32btsmipn32 elf64btsmip elf32ltsmipn32 elf64ltsmip"
- ;;
- mips*-*-lnews*) targ_emul=mipslnews ;;
-@@ -468,6 +481,10 @@
- alpha*-*-linux-gnu*) targ_emul=elf64alpha targ_extra_emuls=alpha
- tdir_alpha=`echo ${targ_alias} | sed -e 's/linux/linuxecoff/'`
- ;;
-+alpha*-*-linux-uclibc*) targ_emul=elf64alpha targ_extra_emuls=alpha
-+ # The following needs to be checked...
-+ tdir_alpha=`echo ${targ_alias} | sed -e 's/linux/linuxecoff/'`
-+ ;;
- alpha*-*-osf*) targ_emul=alpha ;;
- alpha*-*-gnu*) targ_emul=elf64alpha ;;
- alpha*-*-netware*) targ_emul=alpha ;;
---- binutils-2.15.94.0.1/configure~binutils-2.15.91.0.1-uclibc-100-conf
-+++ binutils-2.15.94.0.1/configure
-@@ -1341,6 +1341,18 @@
- i[3456789]86-*-coff | i[3456789]86-*-elf)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
-+ i[3456789]86-*-linux-uclibc)
-+ # This section makes it possible to build newlib natively on linux.
-+ # If we are using a cross compiler then don't configure newlib.
-+ if test x${is_cross_compiler} != xno ; then
-+ noconfigdirs="$noconfigdirs target-newlib"
-+ fi
-+ noconfigdirs="$noconfigdirs target-libgloss"
-+ # If we are not using a cross compiler, do configure newlib.
-+ # Note however, that newlib will only be configured in this situation
-+ # if the --with-newlib option has been given, because otherwise
-+ # 'target-newlib' will appear in skipdirs.
-+ ;;
- i[3456789]86-*-linux*)
- # The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
- # not build java stuff by default.
---- binutils-2.15.94.0.1/configure.in~binutils-2.15.91.0.1-uclibc-100-conf
-+++ binutils-2.15.94.0.1/configure.in
-@@ -563,6 +563,19 @@
- i[[3456789]]86-*-coff | i[[3456789]]86-*-elf)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
-+ i[3456789]86-*-linux-uclibc)
-+ # This section makes it possible to build newlib natively on linux.
-+ # If we are using a cross compiler then don't configure newlib.
-+ if test x${is_cross_compiler} != xno ; then
-+ noconfigdirs="$noconfigdirs target-newlib"
-+ fi
-+ noconfigdirs="$noconfigdirs target-libgloss"
-+ build_modules=
-+ # If we are not using a cross compiler, do configure newlib.
-+ # Note however, that newlib will only be configured in this situation
-+ # if the --with-newlib option has been given, because otherwise
-+ # 'target-newlib' will appear in skipdirs.
-+ ;;
- i[[3456789]]86-*-linux*)
- # The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
- # not build java stuff by default.
---- binutils-2.15.94.0.1/libtool.m4~binutils-2.15.91.0.1-uclibc-100-conf
-+++ binutils-2.15.94.0.1/libtool.m4
-@@ -645,6 +645,11 @@
- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
- ;;
-
-+linux-uclibc*)
-+ lt_cv_deplibs_check_method=pass_all
-+ lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+ ;;
-+
- netbsd* | knetbsd*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
---- binutils-2.15.94.0.1/ltconfig~binutils-2.15.91.0.1-uclibc-100-conf
-+++ binutils-2.15.94.0.1/ltconfig
-@@ -603,6 +603,7 @@
- # Transform linux* to *-*-linux-gnu*, to support old configure scripts.
- case $host_os in
- linux-gnu*) ;;
-+linux-uclibc*) ;;
- linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
- esac
-
-@@ -1270,6 +1271,24 @@
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-+linux-uclibc*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-+ soname_spec='${libname}${release}.so$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ # This implies no fast_install, which is unacceptable.
-+ # Some rework will be needed to allow for fast_install
-+ # before this can be enabled.
-+ # Note: copied from linux-gnu, and may not be appropriate.
-+ hardcode_into_libs=yes
-+ # Assume using the uClibc dynamic linker.
-+ dynamic_linker="uClibc ld.so"
-+ ;;
-+
- netbsd*)
- need_lib_prefix=no
- need_version=no
+++ /dev/null
----
- configure | 2 +-
- configure.in | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- binutils-2.17pre.orig/configure
-+++ binutils-2.17pre/configure
-@@ -3541,11 +3541,11 @@ case " $build_configdirs " in
- *)
-
- # For an installed makeinfo, we require it to be from texinfo 4.2 or
- # higher, else we use the "missing" dummy.
- if ${MAKEINFO} --version \
-- | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])' >/dev/null 2>&1; then
-+ | egrep 'texinfo[^0-9]*(4\.([6-9]|[1-9][0-9])|[5-9]|[1-9][0-9])' >/dev/null 2>&1; then
- :
- else
- MAKEINFO="$MISSING makeinfo"
- fi
- ;;
---- binutils-2.17pre.orig/configure.in
-+++ binutils-2.17pre/configure.in
-@@ -2126,11 +2126,11 @@ case " $build_configdirs " in
- *)
- changequote(,)
- # For an installed makeinfo, we require it to be from texinfo 4.2 or
- # higher, else we use the "missing" dummy.
- if ${MAKEINFO} --version \
-- | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])' >/dev/null 2>&1; then
-+ | egrep 'texinfo[^0-9]*(4\.([6-9]|[1-9][0-9])|[5-9]|[1-9][0-9])' >/dev/null 2>&1; then
- :
- else
- MAKEINFO="$MISSING makeinfo"
- fi
- ;;
+++ /dev/null
-# strip (and objcopy) fail to set the error code if there is no
-# output file name and the rename of the stripped (or copied) file
-# fails, yet the command fails to do anything. This fixes both
-# objcopy and strip.
-#
-# modification by bero: Ported to 2.16.91.0.6
-#
-#Signed-off-by: John Bowler <jbowler@acm.org>
-#Signed-off-by: Bernhard Rosenkraenzer <bero@arklinux.org>
---- binutils-2.16.91.0.6/binutils/objcopy.c.ark 2006-03-11 15:59:07.000000000 +0100
-+++ binutils-2.16.91.0.6/binutils/objcopy.c 2006-03-11 15:59:45.000000000 +0100
-@@ -2593,7 +2593,8 @@
- if (preserve_dates)
- set_times (tmpname, &statbuf);
- if (output_file == NULL)
-- smart_rename (tmpname, argv[i], preserve_dates);
-+ if(smart_rename (tmpname, argv[i], preserve_dates))
-+ hold_status = 1;
- status = hold_status;
- }
- else
-@@ -3184,7 +3185,8 @@
- {
- if (preserve_dates)
- set_times (tmpname, &statbuf);
-- smart_rename (tmpname, input_filename, preserve_dates);
-+ if (smart_rename (tmpname, input_filename, preserve_dates))
-+ status = 1;
- }
- else
- unlink (tmpname);
+++ /dev/null
----
- configure | 2 +-
- configure.in | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- binutils-2.16.91.0.7.orig/configure
-+++ binutils-2.16.91.0.7/configure
-@@ -3629,11 +3629,11 @@ case " $build_configdirs " in
- *)
-
- # For an installed makeinfo, we require it to be from texinfo 4.2 or
- # higher, else we use the "missing" dummy.
- if ${MAKEINFO} --version \
-- | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])' >/dev/null 2>&1; then
-+ | egrep 'texinfo[^0-9]*(4\.([6-9]|[1-9][0-9])|[5-9]|[1-9][0-9])' >/dev/null 2>&1; then
- :
- else
- MAKEINFO="$MISSING makeinfo"
- fi
- ;;
---- binutils-2.16.91.0.7.orig/configure.in
-+++ binutils-2.16.91.0.7/configure.in
-@@ -2204,11 +2204,11 @@ case " $build_configdirs " in
- *)
- changequote(,)
- # For an installed makeinfo, we require it to be from texinfo 4.2 or
- # higher, else we use the "missing" dummy.
- if ${MAKEINFO} --version \
-- | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])' >/dev/null 2>&1; then
-+ | egrep 'texinfo[^0-9]*(4\.([6-9]|[1-9][0-9])|[5-9]|[1-9][0-9])' >/dev/null 2>&1; then
- :
- else
- MAKEINFO="$MISSING makeinfo"
- fi
- ;;
+++ /dev/null
---- binutils-2.16.91.0.7/bfd/configure
-+++ binutils-2.16.91.0.7/bfd/configure
-@@ -3576,7 +3576,7 @@
- ;;
-
- # This must be Linux ELF.
--linux-gnu*)
-+linux-gnu*|linux-uclibc*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
---- binutils-2.16.91.0.7/binutils/configure
-+++ binutils-2.16.91.0.7/binutils/configure
-@@ -3411,7 +3411,7 @@
- ;;
-
- # This must be Linux ELF.
--linux-gnu*)
-+linux-gnu*|linux-uclibc*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
---- binutils-2.16.91.0.7/configure
-+++ binutils-2.16.91.0.7/configure
-@@ -1270,7 +1270,7 @@
- am33_2.0-*-linux*)
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
- ;;
-- sh-*-linux*)
-+ sh*-*-linux*)
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
- ;;
- sh*-*-pe|mips*-*-pe|*arm-wince-pe)
-@@ -1578,7 +1578,7 @@
- romp-*-*)
- noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
- ;;
-- sh-*-* | sh64-*-*)
-+ sh*-*-* | sh64-*-*)
- case "${host}" in
- i[3456789]86-*-vsta) ;; # don't add gprof back in
- i[3456789]86-*-go32*) ;; # don't add gprof back in
---- binutils-2.16.91.0.7/configure.in
-+++ binutils-2.16.91.0.7/configure.in
-@@ -468,7 +468,7 @@
- am33_2.0-*-linux*)
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
- ;;
-- sh-*-linux*)
-+ sh*-*-linux*)
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
- ;;
- sh*-*-pe|mips*-*-pe|*arm-wince-pe)
-@@ -776,7 +776,7 @@
- romp-*-*)
- noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
- ;;
-- sh-*-* | sh64-*-*)
-+ sh*-*-* | sh64-*-*)
- case "${host}" in
- i[[3456789]]86-*-vsta) ;; # don't add gprof back in
- i[[3456789]]86-*-go32*) ;; # don't add gprof back in
---- binutils-2.16.91.0.7/gas/configure
-+++ binutils-2.16.91.0.7/gas/configure
-@@ -3411,7 +3411,7 @@
- ;;
-
- # This must be Linux ELF.
--linux-gnu*)
-+linux-gnu*|linux-uclibc*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
---- binutils-2.16.91.0.7/gprof/configure
-+++ binutils-2.16.91.0.7/gprof/configure
-@@ -3419,6 +3419,11 @@
- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
- ;;
-
-+linux-uclibc*)
-+ lt_cv_deplibs_check_method=pass_all
-+ lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+ ;;
-+
- netbsd* | knetbsd*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
---- binutils-2.16.91.0.7/ld/configure
-+++ binutils-2.16.91.0.7/ld/configure
-@@ -3413,7 +3413,7 @@
- ;;
-
- # This must be Linux ELF.
--linux-gnu*)
-+linux-gnu*|linux-uclibc*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
---- binutils-2.16.91.0.7/libtool.m4
-+++ binutils-2.16.91.0.7/libtool.m4
-@@ -739,7 +739,7 @@
- ;;
-
- # This must be Linux ELF.
--linux-gnu*)
-+linux-gnu*|linux-uclibc*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
---- binutils-2.16.91.0.7/ltconfig
-+++ binutils-2.16.91.0.7/ltconfig
-@@ -602,6 +602,7 @@
-
- # Transform linux* to *-*-linux-gnu*, to support old configure scripts.
- case $host_os in
-+linux-uclibc*) ;;
- linux-gnu*) ;;
- linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
- esac
-@@ -1247,7 +1248,7 @@
- ;;
-
- # This must be Linux ELF.
--linux-gnu*)
-+linux-gnu*|linux-uclibc*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
---- binutils-2.16.91.0.7/opcodes/configure
-+++ binutils-2.16.91.0.7/opcodes/configure
-@@ -3579,7 +3579,7 @@
- ;;
-
- # This must be Linux ELF.
--linux-gnu*)
-+linux-gnu*|linux-uclibc*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
+++ /dev/null
-#!/bin/sh -e
-## 001_ld_makefile_patch.dpatch
-##
-## All lines beginning with `## DP:' are a description of the patch.
-## DP: Description: correct where ld scripts are installed
-## DP: Author: Chris Chimelis <chris@debian.org>
-## DP: Upstream status: N/A
-## DP: Date: ??
-
-if [ $# -ne 1 ]; then
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1
-fi
-
-[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
-
-case "$1" in
- -patch) patch $patch_opts -p1 < $0;;
- -unpatch) patch $patch_opts -p1 -R < $0;;
- *)
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1;;
-esac
-
-exit 0
-
-@DPATCH@
---- binutils-2.16.91.0.1/ld/Makefile.am
-+++ binutils-2.16.91.0.1/ld/Makefile.am
-@@ -20,7 +20,7 @@
- # We put the scripts in the directory $(scriptdir)/ldscripts.
- # We can't put the scripts in $(datadir) because the SEARCH_DIR
- # directives need to be different for native and cross linkers.
--scriptdir = $(tooldir)/lib
-+scriptdir = $(libdir)
-
- EMUL = @EMUL@
- EMULATION_OFILES = @EMULATION_OFILES@
---- binutils-2.16.91.0.1/ld/Makefile.in
-+++ binutils-2.16.91.0.1/ld/Makefile.in
-@@ -268,7 +268,7 @@
- # We put the scripts in the directory $(scriptdir)/ldscripts.
- # We can't put the scripts in $(datadir) because the SEARCH_DIR
- # directives need to be different for native and cross linkers.
--scriptdir = $(tooldir)/lib
-+scriptdir = $(libdir)
- BASEDIR = $(srcdir)/..
- BFDDIR = $(BASEDIR)/bfd
- INCDIR = $(BASEDIR)/include
+++ /dev/null
-#!/bin/sh -e
-## 006_better_file_error.dpatch by David Kimdon <dwhedon@gordian.com>
-##
-## All lines beginning with `## DP:' are a description of the patch.
-## DP: Specify which filename is causing an error if the filename is a
-## DP: directory. (#45832)
-
-if [ $# -ne 1 ]; then
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1
-fi
-
-[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
-
-case "$1" in
- -patch) patch $patch_opts -p1 < $0;;
- -unpatch) patch $patch_opts -p1 -R < $0;;
- *)
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1;;
-esac
-
-exit 0
-
-@DPATCH@
-diff -urNad /home/james/debian/packages/binutils/binutils-2.14.90.0.6/bfd/opncls.c binutils-2.14.90.0.6/bfd/opncls.c
---- /home/james/debian/packages/binutils/binutils-2.14.90.0.6/bfd/opncls.c 2003-07-23 16:08:09.000000000 +0100
-+++ binutils-2.14.90.0.6/bfd/opncls.c 2003-09-10 22:35:00.000000000 +0100
-@@ -150,6 +150,13 @@
- {
- bfd *nbfd;
- const bfd_target *target_vec;
-+ struct stat s;
-+
-+ if (stat (filename, &s) == 0)
-+ if (S_ISDIR(s.st_mode)) {
-+ bfd_set_error (bfd_error_file_not_recognized);
-+ return NULL;
-+ }
-
- nbfd = _bfd_new_bfd ();
- if (nbfd == NULL)
+++ /dev/null
-#!/bin/sh -e
-## 012_check_ldrunpath_length.dpatch by Chris Chimelis <chris@debian.org>
-##
-## All lines beginning with `## DP:' are a description of the patch.
-## DP: Only generate an RPATH entry if LD_RUN_PATH is not empty, for
-## DP: cases where -rpath isn't specified. (#151024)
-
-if [ $# -ne 1 ]; then
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1
-fi
-
-[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
-
-case "$1" in
- -patch) patch $patch_opts -p1 < $0;;
- -unpatch) patch $patch_opts -p1 -R < $0;;
- *)
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1;;
-esac
-
-exit 0
-
-@DPATCH@
-diff -urNad /home/james/debian/packages/binutils/new/binutils-2.15/ld/emultempl/elf32.em binutils-2.15/ld/emultempl/elf32.em
---- /home/james/debian/packages/binutils/new/binutils-2.15/ld/emultempl/elf32.em 2004-05-21 23:12:58.000000000 +0100
-+++ binutils-2.15/ld/emultempl/elf32.em 2004-05-21 23:12:59.000000000 +0100
-@@ -692,6 +692,8 @@
- && command_line.rpath == NULL)
- {
- lib_path = (const char *) getenv ("LD_RUN_PATH");
-+ if ((lib_path) && (strlen (lib_path) == 0))
-+ lib_path = NULL;
- if (gld${EMULATION_NAME}_search_needed (lib_path, &n,
- force))
- break;
-@@ -871,6 +873,8 @@
- rpath = command_line.rpath;
- if (rpath == NULL)
- rpath = (const char *) getenv ("LD_RUN_PATH");
-+ if ((rpath) && (strlen (rpath) == 0))
-+ rpath = NULL;
- if (! (bfd_elf_size_dynamic_sections
- (output_bfd, command_line.soname, rpath,
- command_line.filter_shlib,
+++ /dev/null
---- binutils/bfd/elf32-mips.c~
-+++ binutils/bfd/elf32-mips.c
-@@ -1613,7 +1613,9 @@
-
- /* The SVR4 MIPS ABI says that this should be 0x10000, and Linux uses
- page sizes of up to that limit, so we need to respect it. */
--#define ELF_MAXPAGESIZE 0x10000
-+/*#define ELF_MAXPAGESIZE 0x10000*/
-+/* Use 4K to shrink the elf header. NOT for general use! */
-+#define ELF_MAXPAGESIZE 0x1000
- #define elf32_bed elf32_tradbed
-
- /* Include the target file again for this target. */
---- binutils/bfd/elfn32-mips.c~
-+++ binutils/bfd/elfn32-mips.c
-@@ -2399,7 +2399,9 @@
-
- /* The SVR4 MIPS ABI says that this should be 0x10000, and Linux uses
- page sizes of up to that limit, so we need to respect it. */
--#define ELF_MAXPAGESIZE 0x10000
-+/*#define ELF_MAXPAGESIZE 0x10000*/
-+/* Use 4K to shrink the elf header. NOT for general use! */
-+#define ELF_MAXPAGESIZE 0x1000
- #define elf32_bed elf32_tradbed
-
- /* Include the target file again for this target. */
+++ /dev/null
-Retrieved from http://sources.redhat.com/ml/binutils/2004-04/msg00646.html
-Fixes
-localealias.s:544: Error: junk at end of line, first unrecognized character is `,'
-when building glibc-2.3.2 with gcc-3.4.0 and binutils-2.15.90.0.3
-
-Paths adjusted to match crosstool's patcher.
-
-Message-Id: m3n052qw2g.fsf@whitebox.m5r.de
-From: Andreas Schwab <schwab at suse dot de>
-To: Nathan Sidwell <nathan at codesourcery dot com>
-Cc: Ian Lance Taylor <ian at wasabisystems dot com>, binutils at sources dot redhat dot com
-Date: Fri, 23 Apr 2004 22:27:19 +0200
-Subject: Re: demand_empty_rest_of_line and ignore_rest_of_line
-
-Nathan Sidwell <nathan@codesourcery.com> writes:
-
-> Index: read.c
-> ===================================================================
-> RCS file: /cvs/src/src/gas/read.c,v
-> retrieving revision 1.76
-> diff -c -3 -p -r1.76 read.c
-> *** read.c 12 Mar 2004 17:48:12 -0000 1.76
-> --- read.c 18 Mar 2004 09:56:05 -0000
-> *************** read_a_source_file (char *name)
-> *** 1053,1059 ****
-> #endif
-> input_line_pointer--;
-> /* Report unknown char as ignored. */
-> ! ignore_rest_of_line ();
-> }
->
-> #ifdef md_after_pass_hook
-> --- 1053,1059 ----
-> #endif
-> input_line_pointer--;
-> /* Report unknown char as ignored. */
-> ! demand_empty_rest_of_line ();
-> }
->
-> #ifdef md_after_pass_hook
-
-This means that the unknown character is no longer ignored, despite the
-comment. As a side effect a line starting with a line comment character
-not followed by APP in NO_APP mode now triggers an error instead of just a
-warning, breaking builds of glibc on m68k-linux. Earlier in
-read_a_source_file where #APP is handled there is another comment that
-claims that unknown comments are ignored, when in fact they aren't (only
-the initial line comment character is skipped).
-
-Note that the presence of #APP will mess up the line counters, but
-that appears to be difficult to fix.
-
-Andreas.
-
-2004-04-23 Andreas Schwab <schwab@suse.de>
-
- * read.c (read_a_source_file): Ignore unknown text after line
- comment character. Fix misleading comment.
-
---- binutils/gas/read.c.~1.78.~ 2004-04-23 08:58:23.000000000 +0200
-+++ binutils/gas/read.c 2004-04-23 21:49:01.000000000 +0200
-@@ -950,10 +950,14 @@ read_a_source_file (char *name)
- unsigned int new_length;
- char *tmp_buf = 0;
-
-- bump_line_counters ();
- s = input_line_pointer;
- if (strncmp (s, "APP\n", 4))
-- continue; /* We ignore it */
-+ {
-+ /* We ignore it */
-+ ignore_rest_of_line ();
-+ continue;
-+ }
-+ bump_line_counters ();
- s += 4;
-
- sb_new (&sbuf);
-@@ -1052,7 +1056,7 @@ read_a_source_file (char *name)
- continue;
- #endif
- input_line_pointer--;
-- /* Report unknown char as ignored. */
-+ /* Report unknown char as error. */
- demand_empty_rest_of_line ();
- }
-
-
---
-Andreas Schwab, SuSE Labs, schwab@suse.de
-SuSE Linux AG, MaxfeldstraÃe 5, 90409 NÃrnberg, Germany
-Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5
-"And now for something completely different."
+++ /dev/null
---- binutils-2.16/binutils/Makefile.am.old 2005-06-05 16:59:47.000000000 +0100
-+++ binutils-2.16/binutils/Makefile.am 2005-06-05 17:00:39.000000000 +0100
-@@ -219,20 +219,20 @@
- ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
-
- sysinfo$(EXEEXT_FOR_BUILD): sysinfo.o syslex.o
-- $(CC_FOR_BUILD) $(CFLAGS) $(LDFLAGS) -o $@ sysinfo.o syslex.o
-+ $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.o syslex.o
-
- syslex.o:
- if [ -r syslex.c ]; then \
-- $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS) syslex.c ; \
-+ $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) syslex.c ; \
- else \
-- $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS) $(CFLAGS) $(srcdir)/syslex.c ;\
-+ $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(srcdir)/syslex.c ;\
- fi
-
- sysinfo.o:
- if [ -r sysinfo.c ]; then \
-- $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS) sysinfo.c ; \
-+ $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) sysinfo.c ; \
- else \
-- $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS) $(srcdir)/sysinfo.c ; \
-+ $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(srcdir)/sysinfo.c ; \
- fi
-
- # We need these for parallel make.
+++ /dev/null
-# This patch adds 'linux-uclibc' to all cases which otherwise only
-# fire for 'linux' - most of the time the 'linux-gnu*' cases. This
-# ensures that by default *-*-linux-uclibc is handled in the same way
-# as *-*-linux-gnu
-#
---- binutils-2.16/bfd/config.bfd.orig 2005-09-06 19:58:39.153670708 -0700
-+++ binutils-2.16/bfd/config.bfd 2005-09-06 20:03:14.959026045 -0700
-@@ -140,7 +140,7 @@
- targ_defvec=ecoffalpha_little_vec
- targ_selvecs=bfd_elf64_alpha_vec
- ;;
-- alpha*-*-linux-gnu* | alpha*-*-elf*)
-+ alpha*-*-linux-gnu* | alpha*-*-linux-uclibc* | alpha*-*-elf*)
- targ_defvec=bfd_elf64_alpha_vec
- targ_selvecs=ecoffalpha_little_vec
- ;;
-@@ -150,7 +150,7 @@
- alpha*-*-*)
- targ_defvec=ecoffalpha_little_vec
- ;;
-- ia64*-*-freebsd* | ia64*-*-netbsd* | ia64*-*-linux-gnu* | ia64*-*-elf* | ia64*-*-kfreebsd*-gnu)
-+ ia64*-*-freebsd* | ia64*-*-netbsd* | ia64*-*-linux-gnu* | ia64*-*-linux-uclibc* | ia64*-*-elf* | ia64*-*-kfreebsd*-gnu)
- targ_defvec=bfd_elf64_ia64_little_vec
- targ_selvecs="bfd_elf64_ia64_big_vec bfd_efi_app_ia64_vec"
- ;;
-@@ -227,7 +227,7 @@
- targ_defvec=bfd_elf32_littlearm_vec
- targ_selvecs=bfd_elf32_bigarm_vec
- ;;
-- armeb-*-elf | arm*b-*-linux-gnu*)
-+ armeb-*-elf | arm*b-*-linux-gnu* | arm*b-*-linux-uclibc*)
- targ_defvec=bfd_elf32_bigarm_vec
- targ_selvecs=bfd_elf32_littlearm_vec
- ;;
-@@ -235,7 +235,7 @@
- targ_defvec=bfd_elf32_littlearm_vec
- targ_selvecs=bfd_elf32_bigarm_vec
- ;;
-- arm-*-elf | arm-*-freebsd* | arm*-*-linux-gnu* | arm*-*-conix* | \
-+ arm-*-elf | arm-*-freebsd* | arm*-*-linux-gnu* | arm*-*-linux-uclibc* | arm*-*-conix* | \
- arm*-*-uclinux* | arm-*-kfreebsd*-gnu | \
- arm*-*-eabi* )
- targ_defvec=bfd_elf32_littlearm_vec
-@@ -385,7 +385,7 @@
- ;;
-
- #ifdef BFD64
-- hppa*64*-*-linux-gnu*)
-+ hppa*64*-*-linux-gnu* | hppa*64*-*-linux-uclibc*)
- targ_defvec=bfd_elf64_hppa_linux_vec
- targ_selvecs=bfd_elf64_hppa_vec
- ;;
-@@ -396,7 +396,7 @@
- ;;
- #endif
-
-- hppa*-*-linux-gnu*)
-+ hppa*-*-linux-gnu* | hppa*-*-linux-uclibc*)
- targ_defvec=bfd_elf32_hppa_linux_vec
- targ_selvecs=bfd_elf32_hppa_vec
- ;;
-@@ -529,7 +529,7 @@
- targ_selvecs=bfd_elf32_i386_vec
- targ_underscore=yes
- ;;
-- i[3-7]86-*-linux-gnu*)
-+ i[3-7]86-*-linux-gnu* | i[3-7]86-*-linux-uclibc*)
- targ_defvec=bfd_elf32_i386_vec
- targ_selvecs="i386linux_vec bfd_efi_app_ia32_vec"
- targ64_selvecs=bfd_elf64_x86_64_vec
-@@ -543,7 +543,7 @@
- targ_defvec=bfd_elf64_x86_64_vec
- targ_selvecs="bfd_elf32_i386_vec i386netbsd_vec i386coff_vec bfd_efi_app_ia32_vec"
- ;;
-- x86_64-*-linux-gnu*)
-+ x86_64-*-linux-gnu* | x86_64-*-linux-uclibc*)
- targ_defvec=bfd_elf64_x86_64_vec
- targ_selvecs="bfd_elf32_i386_vec i386linux_vec bfd_efi_app_ia32_vec"
- ;;
-@@ -719,7 +719,7 @@
- targ_selvecs=bfd_elf32_m68k_vec
- targ_underscore=yes
- ;;
-- m68*-*-linux-gnu*)
-+ m68*-*-linux-gnu* | m68*-*-linux-uclibc*)
- targ_defvec=bfd_elf32_m68k_vec
- targ_selvecs=m68klinux_vec
- ;;
-@@ -1005,7 +1005,7 @@
- ;;
- #endif
- powerpc-*-*bsd* | powerpc-*-elf* | powerpc-*-sysv4* | powerpc-*-eabi* | \
-- powerpc-*-solaris2* | powerpc-*-linux-gnu* | powerpc-*-rtems* | \
-+ powerpc-*-solaris2* | powerpc-*-linux-gnu* | powerpc-*-linux-uclibc* | powerpc-*-rtems* | \
- powerpc-*-chorus* | powerpc-*-vxworks* | powerpc-*-windiss*)
- targ_defvec=bfd_elf32_powerpc_vec
- targ_selvecs="rs6000coff_vec bfd_elf32_powerpcle_vec ppcboot_vec"
-@@ -1042,7 +1042,7 @@
- targ_selvecs="rs6000coff_vec bfd_elf32_powerpc_vec ppcboot_vec"
- ;;
- powerpcle-*-elf* | powerpcle-*-sysv4* | powerpcle-*-eabi* | \
-- powerpcle-*-solaris2* | powerpcle-*-linux-gnu* | powerpcle-*-vxworks* |\
-+ powerpcle-*-solaris2* | powerpcle-*-linux-gnu* | powerpcle-*-linux-uclibc* | powerpcle-*-vxworks* |\
- powerpcle-*-rtems*)
- targ_defvec=bfd_elf32_powerpcle_vec
- targ_selvecs="rs6000coff_vec bfd_elf32_powerpc_vec ppcboot_vec"
-@@ -1213,7 +1213,7 @@
- targ_selvecs="bfd_elf32_sparc_vec sunos_big_vec"
- targ_underscore=yes
- ;;
-- sparc-*-linux-gnu*)
-+ sparc-*-linux-gnu* | sparc-*-linux-uclibc*)
- targ_defvec=bfd_elf32_sparc_vec
- targ_selvecs="sparclinux_vec bfd_elf64_sparc_vec sunos_big_vec"
- ;;
-@@ -1260,7 +1260,7 @@
- targ_defvec=sunos_big_vec
- targ_underscore=yes
- ;;
-- sparc64-*-linux-gnu*)
-+ sparc64-*-linux-gnu* | sparc64-*-linux-uclibc*)
- targ_defvec=bfd_elf64_sparc_vec
- targ_selvecs="bfd_elf32_sparc_vec sparclinux_vec sunos_big_vec"
- ;;
-@@ -1329,7 +1329,7 @@
- targ_underscore=yes
- ;;
-
-- vax-*-linux-gnu*)
-+ vax-*-linux-gnu* | vax-*-linux-uclibc*)
- targ_defvec=bfd_elf32_vax_vec
- ;;
-
---- binutils-2.16/bfd/configure.in.orig 2005-09-06 20:25:48.848220921 -0700
-+++ binutils-2.16/bfd/configure.in 2005-09-06 20:26:58.628611924 -0700
-@@ -163,7 +163,7 @@
- alpha*-*-freebsd* | alpha*-*-kfreebsd*-gnu)
- COREFILE=''
- ;;
-- alpha*-*-linux-gnu*)
-+ alpha*-*-linux-gnu* | alpha*-*-linux-uclibc*)
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/alphalinux.h"'
- ;;
-@@ -248,7 +248,7 @@
- TRAD_HEADER='"hosts/i386mach3.h"'
- ;;
- changequote(,)dnl
-- i[3-7]86-*-linux-gnu*)
-+ i[3-7]86-*-linux-gnu* | i[3-7]86-*-linux-uclibc*)
- changequote([,])dnl
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/i386linux.h"'
-@@ -289,7 +289,7 @@
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/hp300bsd.h"'
- ;;
-- m68*-*-linux-gnu*)
-+ m68*-*-linux-gnu* | m68*-*-linux-uclibc*)
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/m68klinux.h"'
- ;;
-@@ -375,7 +375,7 @@
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/vaxult2.h"'
- ;;
-- vax-*-linux-gnu*)
-+ vax-*-linux-gnu* | vax-*-linux-uclibc*)
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/vaxlinux.h"'
- ;;
---- binutils-2.16/bfd/configure.orig 2005-09-06 20:03:14.991028059 -0700
-+++ binutils-2.16/bfd/configure 2005-09-06 20:04:48.512913020 -0700
-@@ -3572,7 +3572,7 @@
- ;;
-
- # This must be Linux ELF.
--linux-gnu*)
-+linux-gnu* | linux-uclibc*)
- case $host_cpu in
- alpha* | mips* | hppa* | i*86 | powerpc* | sparc* | ia64* )
- lt_cv_deplibs_check_method=pass_all ;;
-@@ -9918,7 +9918,7 @@
- alpha*-*-freebsd* | alpha*-*-kfreebsd*-gnu)
- COREFILE=''
- ;;
-- alpha*-*-linux-gnu*)
-+ alpha*-*-linux-gnu* | alpha*-*-linux-uclibc*)
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/alphalinux.h"'
- ;;
-@@ -9982,7 +9982,7 @@
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/i386mach3.h"'
- ;;
-- i[3-7]86-*-linux-gnu*)
-+ i[3-7]86-*-linux-gnu* | i[3-7]86-*-linux-uclibc*)
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/i386linux.h"'
- ;;
-@@ -10020,7 +10020,7 @@
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/hp300bsd.h"'
- ;;
-- m68*-*-linux-gnu*)
-+ m68*-*-linux-gnu* | m68*-*-linux-uclibc*)
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/m68klinux.h"'
- ;;
-@@ -10154,7 +10154,7 @@
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/vaxult2.h"'
- ;;
-- vax-*-linux-gnu*)
-+ vax-*-linux-gnu* | vax-*-linux-uclibc*)
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/vaxlinux.h"'
- ;;
---- binutils-2.16/binutils/configure.orig 2005-09-06 20:26:58.676614945 -0700
-+++ binutils-2.16/binutils/configure 2005-09-06 20:27:21.230034142 -0700
-@@ -1564,7 +1564,7 @@
- ;;
-
- # This must be Linux ELF.
--linux-gnu*)
-+linux-gnu* | linux-uclibc*)
- case $host_cpu in
- alpha* | mips* | hppa* | i*86 | powerpc* | sparc* | ia64* )
- lt_cv_deplibs_check_method=pass_all ;;
---- binutils-2.16/configure.in.orig 2005-09-06 20:31:11.872547560 -0700
-+++ binutils-2.16/configure.in 2005-09-06 20:31:47.322778302 -0700
-@@ -346,7 +346,7 @@
- ;;
- "")
- case "${target}" in
-- *-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu)
-+ *-*-linux*-gnu | *-*-linux*-uclibc | *-*-gnu* | *-*-k*bsd*-gnu)
- # Enable libmudflap by default in GNU and friends.
- ;;
- *-*-freebsd*)
---- binutils-2.16/configure.orig 2005-09-06 20:30:00.120032459 -0700
-+++ binutils-2.16/configure 2005-09-06 20:31:11.832545043 -0700
-@@ -1142,7 +1142,7 @@
- ;;
- "")
- case "${target}" in
-- *-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu)
-+ *-*-linux*-gnu | *-*-linux*-uclibc | *-*-gnu* | *-*-k*bsd*-gnu)
- # Enable libmudflap by default in GNU and friends.
- ;;
- *-*-freebsd*)
---- binutils-2.16/gas/configure.in.orig 2005-09-06 20:32:36.993903909 -0700
-+++ binutils-2.16/gas/configure.in 2005-09-06 20:32:55.667078938 -0700
-@@ -161,7 +161,7 @@
- AC_DEFINE(AIX_WEAK_SUPPORT, 1,
- [Define if using AIX 5.2 value for C_WEAKEXT.])
- ;;
-- ppc-*-linux-gnu*)
-+ ppc-*-linux-gnu* | ppc-*-linux-uclibc*)
- case "$endian" in
- big) ;;
- *) AC_MSG_ERROR(GNU/Linux must be configured big endian) ;;
---- binutils-2.16/gas/configure.orig 2005-09-06 20:31:55.247276960 -0700
-+++ binutils-2.16/gas/configure 2005-09-06 20:32:36.961901896 -0700
-@@ -3409,7 +3409,7 @@
- ;;
-
- # This must be Linux ELF.
--linux-gnu*)
-+linux-gnu* | linux-uclibc*)
- case $host_cpu in
- alpha* | mips* | hppa* | i*86 | powerpc* | sparc* | ia64* )
- lt_cv_deplibs_check_method=pass_all ;;
-@@ -4462,7 +4462,7 @@
- _ACEOF
-
- ;;
-- ppc-*-linux-gnu*)
-+ ppc-*-linux-gnu* | ppc-*-linux-uclibc*)
- case "$endian" in
- big) ;;
- *) { { echo "$as_me:$LINENO: error: GNU/Linux must be configured big endian" >&5
---- binutils-2.16/gas/configure.tgt.orig 2005-09-06 20:32:55.695080700 -0700
-+++ binutils-2.16/gas/configure.tgt 2005-09-06 20:35:59.482645723 -0700
-@@ -100,7 +100,7 @@
- alpha-*-*vms*) fmt=evax ;;
- alpha-*-osf*) fmt=ecoff ;;
- alpha-*-linuxecoff*) fmt=ecoff ;;
-- alpha-*-linux-gnu*) fmt=elf em=linux ;;
-+ alpha-*-linux-gnu* | alpha-*-linux-uclibc*) fmt=elf em=linux ;;
- alpha-*-netbsd*) fmt=elf em=nbsd ;;
- alpha-*-openbsd*) fmt=elf em=obsd ;;
-
-@@ -116,7 +116,7 @@
- arm-*-conix*) fmt=elf ;;
- arm-*-linux*aout*) fmt=aout em=linux ;;
- arm-*-linux-gnueabi*) fmt=elf em=armlinuxeabi ;;
-- arm-*-linux-gnu*) fmt=elf em=linux ;;
-+ arm-*-linux-gnu* | arm-*-linux-uclibc*) fmt=elf em=linux ;;
- arm-*-uclinux*) fmt=elf em=linux ;;
- arm-*-netbsdelf*) fmt=elf em=nbsd ;;
- arm-*-*n*bsd*) fmt=aout em=nbsd ;;
-@@ -128,7 +128,7 @@
-
- avr-*-*) fmt=elf ;;
-
-- cris-*-linux-gnu* | crisv32-*-linux-gnu*)
-+ cris-*-linux-gnu* | crisv32-*-linux-gnu* | cris-*-linux-uclibc* | crisv32-*-linux-uclibc*)
- fmt=multi bfd_gas=yes em=linux ;;
- cris-*-* | crisv32-*-*) fmt=multi bfd_gas=yes ;;
-
-@@ -192,7 +192,7 @@
- i386-*-linux*aout*) fmt=aout em=linux ;;
- i386-*-linux*oldld) fmt=aout em=linux ;;
- i386-*-linux*coff*) fmt=coff em=linux ;;
-- i386-*-linux-gnu*) fmt=elf em=linux ;;
-+ i386-*-linux-gnu* | i386-*-linux-uclibc*) fmt=elf em=linux ;;
- i386-*-lynxos*) fmt=elf em=lynx bfd_gas=yes ;;
- i386-*-sysv[45]*) fmt=elf ;;
- i386-*-solaris*) fmt=elf ;;
-@@ -238,7 +238,7 @@
-
- ia64-*-elf*) fmt=elf ;;
- ia64-*-aix*) fmt=elf em=ia64aix ;;
-- ia64-*-linux-gnu*) fmt=elf em=linux ;;
-+ ia64-*-linux-gnu* | ia64-*-linux-uclibc*) fmt=elf em=linux ;;
- ia64-*-hpux*) fmt=elf em=hpux ;;
- ia64-*-netbsd*) fmt=elf em=nbsd ;;
-
-@@ -265,7 +265,7 @@
- m68k-*-rtems*) fmt=elf ;;
- m68k-*-hpux*) fmt=hp300 em=hp300 ;;
- m68k-*-linux*aout*) fmt=aout em=linux ;;
-- m68k-*-linux-gnu*) fmt=elf em=linux ;;
-+ m68k-*-linux-gnu* | m68k-*-linux-uclibc*) fmt=elf em=linux ;;
- m68k-*-uclinux*) fmt=elf ;;
- m68k-*-gnu*) fmt=elf ;;
- m68k-*-netbsdelf*) fmt=elf em=nbsd ;;
-@@ -332,7 +332,7 @@
- ppc-*-beos*) fmt=coff ;;
- ppc-*-*n*bsd* | ppc-*-elf*) fmt=elf ;;
- ppc-*-eabi* | ppc-*-sysv4*) fmt=elf ;;
-- ppc-*-linux-gnu*) fmt=elf em=linux ;;
-+ ppc-*-linux-gnu* | ppc-*-linux-uclibc*) fmt=elf em=linux ;;
- ppc-*-solaris*) fmt=elf ;;
- ppc-*-rtems*) fmt=elf ;;
- ppc-*-macos*) fmt=coff em=macos ;;
-@@ -340,7 +340,7 @@
- ppc-*-kaos*) fmt=elf ;;
- ppc-*-lynxos*) fmt=elf em=lynx bfd_gas=yes ;;
-
-- s390-*-linux-gnu*) fmt=elf em=linux ;;
-+ s390-*-linux-gnu* | s390-*-linux-uclibc*) fmt=elf em=linux ;;
- s390-*-tpf*) fmt=elf ;;
-
- sh*-*-linux*) fmt=elf em=linux
-@@ -369,7 +369,7 @@
- sparc-*-aout | sparc*-*-vxworks*) fmt=aout em=sparcaout ;;
- sparc-*-coff) fmt=coff ;;
- sparc-*-linux*aout*) fmt=aout em=linux ;;
-- sparc-*-linux-gnu*) fmt=elf em=linux ;;
-+ sparc-*-linux-gnu* | sparc-*-linux-uclibc*) fmt=elf em=linux ;;
- sparc-fujitsu-none) fmt=aout ;;
- sparc-*-elf) fmt=elf ;;
- sparc-*-sysv4*) fmt=elf ;;
-@@ -398,7 +398,7 @@
- vax-*-netbsdelf*) fmt=elf em=nbsd ;;
- vax-*-netbsd*) fmt=aout em=nbsd ;;
- vax-*-bsd* | vax-*-ultrix*) fmt=aout ;;
-- vax-*-linux-gnu*) fmt=elf em=linux bfd_gas=yes ;;
-+ vax-*-linux-gnu* | vax-*-linux-uclibc*) fmt=elf em=linux bfd_gas=yes ;;
-
- w65-*-*) fmt=coff ;;
-
---- binutils-2.16/gprof/configure.orig 2005-09-06 20:36:04.850983531 -0700
-+++ binutils-2.16/gprof/configure 2005-09-06 20:36:26.344336022 -0700
-@@ -3407,7 +3407,7 @@
- ;;
-
- # This must be Linux ELF.
--linux-gnu*)
-+linux-gnu* | linux-uclibc*)
- case $host_cpu in
- alpha* | mips* | hppa* | i*86 | powerpc* | sparc* | ia64* )
- lt_cv_deplibs_check_method=pass_all ;;
---- binutils-2.16/ld/configure.host.orig 2005-09-06 20:37:46.085353808 -0700
-+++ binutils-2.16/ld/configure.host 2005-09-06 20:40:03.381993341 -0700
-@@ -83,7 +83,7 @@
- HOSTING_CRT0=`echo "$HOSTING_CRT0" | sed -e "s,ld\[^ \]\*,ld-linux,g"`
- ;;
-
--arm*-*-linux-gnu*)
-+arm*-*-linux-gnu* | arm*-*-linux-uclibc*)
- HOSTING_CRT0='-p '`echo "$HOSTING_CRT0" | sed -e "s,ld\[^ \]\*,ld-linux,g"`
- ;;
-
-@@ -141,7 +141,7 @@
- HOSTING_LIBS="$HOSTING_LIBS"' -lcygwin -L/usr/lib/w32api -luser32 -lkernel32 -ladvapi32 -lshell32 `if [ -f ../gcc/libgcc.a ] ; then echo ../gcc/libgcc.a ; else ${CC} -print-libgcc-file-name; fi`'
- ;;
-
--ia64-*-linux-gnu*)
-+ia64-*-linux-gnu* | ia64-*-linux-uclibc*)
- HOSTING_CRT0=`echo "$HOSTING_CRT0" | sed -e "s,ld\[^ \]*\*,ld-linux-ia64,g"`
- ;;
-
-@@ -155,11 +155,11 @@
- HOSTING_LIBS='-L/usr/lib32 '"$HOSTING_LIBS"' `if [ -f ../gcc/crtend.o ]; then echo ../gcc/crtend.o ; else ${CC} -print-file-name=crtend.o; fi` /usr/lib32/crtn.o -init __do_global_ctors -fini __do_global_dtors'
- ;;
-
--mips*-*-linux-gnu*)
-+mips*-*-linux-gnu* | mips*-*-linux-uclibc*)
- HOSTING_CRT0=`echo "$HOSTING_CRT0" | sed -e "s,\\\`specs.*\"\\\`,/lib/ld.so.1,"`
- ;;
-
--m68*-*-linux-gnu*)
-+m68*-*-linux-gnu* | m68*-*-linux-uclibc*)
- HOSTING_CRT0=`echo "$HOSTING_CRT0" | sed -e "s,\\\`specs.*\"\\\`,/lib/ld.so.1,"`
- ;;
-
-@@ -183,19 +183,19 @@
- HOSTING_LIBS="$HOSTING_LIBS"' `if [ -f ../gcc/crtend.o ]; then echo ../gcc/crtend.o; else ${CC} -print-file-name=crtend.o; fi`'
- ;;
-
--powerpc64*-*-linux-gnu*)
-+powerpc64*-*-linux-gnu* | powerpc64*-*-linux-uclibc*)
- HOSTING_CRT0=`echo "$HOSTING_CRT0" | sed -e "s,\\\`specs.*\"\\\`,/lib64/ld64.so.1,"`
- ;;
-
--powerpc*-*-linux-gnu*)
-+powerpc*-*-linux-gnu* | powerpc*-*-linux-uclibc*)
- HOSTING_CRT0=`echo "$HOSTING_CRT0" | sed -e "s,\\\`specs.*\"\\\`,/lib/ld.so.1,"`
- ;;
-
--s390x-*-linux-gnu*)
-+s390x-*-linux-gnu* | s390x-*-linux-uclibc*)
- HOSTING_CRT0=`echo "$HOSTING_CRT0" | sed -e "s,\\\`specs.*\"\\\`,/lib/ld64.so.1,"`
- ;;
-
--s390-*-linux-gnu*)
-+s390-*-linux-gnu* | s390-*-linux-uclibc*)
- HOSTING_CRT0=`echo "$HOSTING_CRT0" | sed -e "s,\\\`specs.*\"\\\`,/lib/ld.so.1,"`
- ;;
-
-@@ -209,15 +209,15 @@
- HOSTING_LIBS="$HOSTING_LIBS"' `if [ -f ../gcc/crtend.o ]; then echo ../gcc/crtend.o; else ${CC} -print-file-name=crtend.o; fi` `if [ -f ../gcc/crtn.o ]; then echo ../gcc/crtn.o; else ${CC} -print-file-name=crtn.o; fi`'
- ;;
-
--sparc-*-linux-gnu*)
-+sparc-*-linux-gnu* | sparc-*-linux-uclibc*)
- HOSTING_CRT0=`echo "$HOSTING_CRT0" | sed -e "s,\\\`specs.*\"\\\`,/lib/ld-linux.so.2,"`
- ;;
-
--sparc64-*-linux-gnu*)
-+sparc64-*-linux-gnu* | sparc64-*-linux-uclibc*)
- HOSTING_CRT0=`echo "$HOSTING_CRT0" | sed -e "s,\\\`specs.*\"\\\`,/lib64/ld-linux.so.2,"`
- ;;
-
--x86_64-*-linux-gnu*)
-+x86_64-*-linux-gnu* | x86_64-*-linux-uclibc*)
- HOSTING_CRT0=`echo "$HOSTING_CRT0" | sed -e "s,\\\`specs.*\"\\\`,/lib64/ld-linux-x86-64.so.2,"`
- ;;
-
---- binutils-2.16/ld/configure.orig 2005-09-06 20:37:34.700637413 -0700
-+++ binutils-2.16/ld/configure 2005-09-06 20:37:46.013349277 -0700
-@@ -1568,7 +1568,7 @@
- ;;
-
- # This must be Linux ELF.
--linux-gnu*)
-+linux-gnu* | linux-uclibc*)
- case $host_cpu in
- alpha* | mips* | hppa* | i*86 | powerpc* | sparc* | ia64* )
- lt_cv_deplibs_check_method=pass_all ;;
---- binutils-2.16/ld/configure.tgt.orig 2005-09-06 20:40:03.413995355 -0700
-+++ binutils-2.16/ld/configure.tgt 2005-09-06 20:45:48.111685813 -0700
-@@ -30,7 +30,7 @@
- cris-*-*aout*) targ_emul=crisaout
- targ_extra_emuls="criself crislinux"
- targ_extra_libpath=$targ_extra_emuls ;;
--cris-*-linux-gnu* | cris-*-linux-gnu*)
-+cris-*-linux-gnu* | cris-*-linux-gnu* | cris-*-linux-uclibc* | cris-*-linux-uclibc*)
- targ_emul=crislinux ;;
- cris-*-* | crisv32-*-*) targ_emul=criself
- targ_extra_emuls="crisaout crislinux"
-@@ -62,14 +62,14 @@
- tdir_elf32_sparc=`echo ${targ_alias} | sed -e 's/aout//'`
- tdir_sun4=sparc-sun-sunos4
- ;;
--sparc64-*-linux-gnu*) targ_emul=elf64_sparc
-+sparc64-*-linux-gnu* | sparc64-*-linux-uclibc*) targ_emul=elf64_sparc
- targ_extra_emuls="elf32_sparc sparclinux sun4"
- targ_extra_libpath=elf32_sparc
- tdir_elf32_sparc=`echo ${targ_alias} | sed -e 's/64//'`
- tdir_sparclinux=${tdir_elf32_sparc}aout
- tdir_sun4=sparc-sun-sunos4
- ;;
--sparc*-*-linux-gnu*) targ_emul=elf32_sparc
-+sparc*-*-linux-gnu* | sparc*-*-linux-uclibc*) targ_emul=elf32_sparc
- targ_extra_emuls="sparclinux elf64_sparc sun4"
- targ_extra_libpath=elf64_sparc
- tdir_sparclinux=${targ_alias}aout
-@@ -119,8 +119,8 @@
- ia64-*-aix*) targ_emul=elf64_aix ;;
- m32r*le-*-elf*) targ_emul=m32rlelf ;;
- m32r*-*-elf*) targ_emul=m32relf ;;
--m32r*le-*-linux-gnu*) targ_emul=m32rlelf_linux ;;
--m32r*-*-linux-gnu*) targ_emul=m32relf_linux ;;
-+m32r*le-*-linux-gnu* | m32r*le-*-linux-uclibc*) targ_emul=m32rlelf_linux ;;
-+m32r*-*-linux-gnu* | m32r*-*-linux-uclibc*) targ_emul=m32relf_linux ;;
- m68hc11-*-*|m6811-*-*) targ_emul=m68hc11elf
- targ_extra_emuls="m68hc11elfb m68hc12elf m68hc12elfb" ;;
- m68hc12-*-*|m6812-*-*) targ_emul=m68hc12elf
-@@ -131,7 +131,7 @@
- m68*-apple-aux*) targ_emul=m68kaux ;;
- maxq-*-coff) targ_emul=maxqcoff;;
- *-tandem-none) targ_emul=st2000 ;;
--i370-*-elf* | i370-*-linux-gnu*) targ_emul=elf32i370 ;;
-+i370-*-elf* | i370-*-linux-gnu* | i370-*-linux-uclibc*) targ_emul=elf32i370 ;;
- i[3-7]86-*-nto-qnx*) targ_emul=i386nto ;;
- i[3-7]86-*-vsta) targ_emul=vsta ;;
- i[3-7]86-go32-rtems*) targ_emul=i386go32 ;;
-@@ -155,14 +155,14 @@
- tdir_elf_i386=`echo ${targ_alias} | sed -e 's/aout//'`
- ;;
- i[3-7]86-*-linux*oldld) targ_emul=i386linux; targ_extra_emuls=elf_i386 ;;
--i[3-7]86-*-linux-gnu*) targ_emul=elf_i386
-+i[3-7]86-*-linux-gnu* | i[3-7]86-*-linux-uclibc*) targ_emul=elf_i386
- targ_extra_emuls=i386linux
- if test x${want64} = xtrue; then
- targ_extra_emuls="$targ_extra_emuls elf_x86_64"
- fi
- tdir_i386linux=${targ_alias}aout
- ;;
--x86_64-*-linux-gnu*) targ_emul=elf_x86_64
-+x86_64-*-linux-gnu* | x86_64-*-linux-uclibc*) targ_emul=elf_x86_64
- targ_extra_emuls="elf_i386 i386linux"
- targ_extra_libpath=elf_i386
- tdir_i386linux=`echo ${targ_alias}aout | sed -e 's/x86_64/i386/'`
-@@ -262,13 +262,14 @@
- arm-*-kaos*) targ_emul=armelf ;;
- arm9e-*-elf) targ_emul=armelf ;;
- arm*b-*-linux-gnueabi) targ_emul=armelfb_linux_eabi ;;
--arm*b-*-linux-gnu*) targ_emul=armelfb_linux; targ_extra_emuls=armelfb ;;
-+arm*b-*-linux-gnu* | arm*b-*-linux-uclibc*) targ_emul=armelfb_linux; targ_extra_emuls=armelfb ;;
- arm*-*-linux-gnueabi) targ_emul=armelf_linux_eabi ;;
--arm*-*-linux-gnu*) targ_emul=armelf_linux; targ_extra_emuls=armelf ;;
-+arm*-*-linux-gnu* | arm*-*-linux-uclibc*) targ_emul=armelf_linux; targ_extra_emuls=armelf ;;
- arm*-*-uclinux*) targ_emul=armelf_linux; targ_extra_emuls=armelf ;;
- arm-*-vxworks) targ_emul=armelf_vxworks ;;
- arm*-*-conix*) targ_emul=armelf ;;
--thumb-*-linux-gnu* | thumb-*-uclinux*) targ_emul=armelf_linux; targ_extra_emuls=armelf ;;
-+thumb-*-linux-gnu* | thumb-*-linux-uclibc* | thumb-*-uclinux*) targ_emul=armelf_linux; targ_extra_emuls=armelf ;;
-+thumbb-*-linux-gnu* | thumbb-*-linux-uclibc* | thumbb-*-uclinux*) targ_emul=armelfb_linux; targ_extra_emuls=armelfb ;;
- strongarm-*-coff) targ_emul=armcoff ;;
- strongarm-*-elf) targ_emul=armelf ;;
- strongarm-*-kaos*) targ_emul=armelf ;;
-@@ -372,7 +373,7 @@
- targ_extra_emuls=m68kelf
- tdir_m68kelf=`echo ${targ_alias} | sed -e 's/aout//'`
- ;;
--m68k-*-linux-gnu*) targ_emul=m68kelf
-+m68k-*-linux-gnu* | m68k-*-linux-uclibc*) targ_emul=m68kelf
- targ_extra_emuls=m68klinux
- tdir_m68klinux=`echo ${targ_alias} | sed -e 's/linux/linuxaout/'`
- ;;
-@@ -388,9 +389,9 @@
- m68*-*-psos*) targ_emul=m68kpsos ;;
- m68*-*-rtemscoff*) targ_emul=m68kcoff ;;
- m68*-*-rtems*) targ_emul=m68kelf ;;
--hppa*64*-*-linux-gnu*) targ_emul=hppa64linux ;;
-+hppa*64*-*-linux-gnu* | hppa*64*-*-linux-uclibc*) targ_emul=hppa64linux ;;
- hppa*64*-*) targ_emul=elf64hppa ;;
--hppa*-*-linux-gnu*) targ_emul=hppalinux ;;
-+hppa*-*-linux-gnu* | hppa*-*-linux-uclibc*) targ_emul=hppalinux ;;
- hppa*-*-*elf*) targ_emul=hppaelf ;;
- hppa*-*-lites*) targ_emul=hppaelf ;;
- hppa*-*-netbsd*) targ_emul=hppanbsd ;;
-@@ -402,7 +403,7 @@
- vax-*-netbsdaout* | vax-*-netbsd*)
- targ_emul=vaxnbsd
- targ_extra_emuls=elf32vax ;;
--vax-*-linux-gnu*) targ_emul=elf32vax ;;
-+vax-*-linux-gnu* | vax-*-linux-uclibc*) targ_emul=elf32vax ;;
- mips*-*-pe) targ_emul=mipspe ;
- targ_extra_ofiles="deffilep.o pe-dll.o" ;;
- mips*-dec-ultrix*) targ_emul=mipslit ;;
-@@ -436,18 +437,18 @@
- mips*-*-vxworks*) targ_emul=elf32ebmip
- targ_extra_emuls="elf32elmip" ;;
- mips*-*-windiss) targ_emul=elf32mipswindiss ;;
--mips64*el-*-linux-gnu*) targ_emul=elf32ltsmipn32
-+mips64*el-*-linux-gnu* | mips64*el-*-linux-uclibc*) targ_emul=elf32ltsmipn32
- targ_extra_emuls="elf32btsmipn32 elf32ltsmip elf32btsmip elf64ltsmip elf64btsmip"
- targ_extra_libpath="elf32ltsmip elf64ltsmip"
- ;;
--mips64*-*-linux-gnu*) targ_emul=elf32btsmipn32
-+mips64*-*-linux-gnu* | mips64*-*-linux-uclibc*) targ_emul=elf32btsmipn32
- targ_extra_emuls="elf32ltsmipn32 elf32btsmip elf32ltsmip elf64btsmip elf64ltsmip"
- targ_extra_libpath="elf32btsmip elf64btsmip"
- ;;
--mips*el-*-linux-gnu*) targ_emul=elf32ltsmip
-+mips*el-*-linux-gnu* | mips*el-*-linux-uclibc*) targ_emul=elf32ltsmip
- targ_extra_emuls="elf32btsmip elf32ltsmipn32 elf64ltsmip elf32btsmipn32 elf64btsmip"
- ;;
--mips*-*-linux-gnu*) targ_emul=elf32btsmip
-+mips*-*-linux-gnu* | mips*-*-linux-uclibc*) targ_emul=elf32btsmip
- targ_extra_emuls="elf32ltsmip elf32btsmipn32 elf64btsmip elf32ltsmipn32 elf64ltsmip"
- ;;
- mips*-*-lnews*) targ_emul=mipslnews ;;
-@@ -467,7 +468,7 @@
- alpha*-*-linuxecoff*) targ_emul=alpha targ_extra_emuls=elf64alpha
- tdir_elf64alpha=`echo ${targ_alias} | sed -e 's/ecoff//'`
- ;;
--alpha*-*-linux-gnu*) targ_emul=elf64alpha targ_extra_emuls=alpha
-+alpha*-*-linux-gnu* | alpha*-*-linux-uclibc*) targ_emul=elf64alpha targ_extra_emuls=alpha
- tdir_alpha=`echo ${targ_alias} | sed -e 's/linux/linuxecoff/'`
- ;;
- alpha*-*-osf*) targ_emul=alpha ;;
---- binutils-2.16/ld/emultempl/elf32.em.orig 2005-09-06 20:45:48.247694371 -0700
-+++ binutils-2.16/ld/emultempl/elf32.em 2005-09-06 20:46:39.158898011 -0700
-@@ -65,7 +65,7 @@
-
- if [ "x${USE_LIBPATH}" = xyes ] ; then
- case ${target} in
-- *-*-linux-gnu*)
-+ *-*-linux-gnu* | *-*-linux-uclibc*)
- cat >>e${EMULATION_NAME}.c <<EOF
- #ifdef HAVE_GLOB
- #include <glob.h>
-@@ -350,7 +350,7 @@
-
- EOF
- case ${target} in
-- *-*-linux-gnu*)
-+ *-*-linux-gnu* | *-*-linux-uclibc*)
- cat >>e${EMULATION_NAME}.c <<EOF
- {
- struct bfd_link_needed_list *l;
-@@ -522,7 +522,7 @@
-
- EOF
- case ${target} in
-- *-*-linux-gnu*)
-+ *-*-linux-gnu* | *-*-linux-uclibc*)
- cat >>e${EMULATION_NAME}.c <<EOF
- /* For a native linker, check the file /etc/ld.so.conf for directories
- in which we may find shared libraries. /etc/ld.so.conf is really
-@@ -932,7 +932,7 @@
- EOF
- if [ "x${USE_LIBPATH}" = xyes ] ; then
- case ${target} in
-- *-*-linux-gnu*)
-+ *-*-linux-gnu* | *-*-linux-uclibc*)
- cat >>e${EMULATION_NAME}.c <<EOF
- if (gld${EMULATION_NAME}_check_ld_so_conf (l->name, force))
- break;
---- binutils-2.16/libtool.m4.orig 2005-09-06 20:46:55.131903129 -0700
-+++ binutils-2.16/libtool.m4 2005-09-06 20:47:07.364672889 -0700
-@@ -634,7 +634,7 @@
- ;;
-
- # This must be Linux ELF.
--linux-gnu*)
-+linux-gnu* | linux-uclibc*)
- case $host_cpu in
- alpha* | mips* | hppa* | i*86 | powerpc* | sparc* | ia64* )
- lt_cv_deplibs_check_method=pass_all ;;
---- binutils-2.16/ltconfig.orig 2005-09-06 20:47:13.965088227 -0700
-+++ binutils-2.16/ltconfig 2005-09-06 20:49:12.944575134 -0700
-@@ -1247,7 +1247,7 @@
- ;;
-
- # This must be Linux ELF.
--linux-gnu*)
-+linux-gnu* | linux-uclibc*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
---- binutils-2.16/ltmain.sh.orig 2005-09-06 20:49:12.980577399 -0700
-+++ binutils-2.16/ltmain.sh 2005-09-06 20:50:15.180491393 -0700
-@@ -2600,7 +2600,7 @@
- versuffix="$major.$revision"
- ;;
-
-- linux)
-+ linux | linux-uclibc)
- major=.`expr $current - $age`
- versuffix="$major.$age.$revision"
- ;;
---- binutils-2.16/opcodes/configure.orig 2005-09-06 20:50:15.220493910 -0700
-+++ binutils-2.16/opcodes/configure 2005-09-06 20:50:38.053930728 -0700
-@@ -3576,7 +3576,7 @@
- ;;
-
- # This must be Linux ELF.
--linux-gnu*)
-+linux-gnu* | linux-uclibc*)
- case $host_cpu in
- alpha* | mips* | hppa* | i*86 | powerpc* | sparc* | ia64* )
- lt_cv_deplibs_check_method=pass_all ;;
+++ /dev/null
-# strip (and objcopy) fail to set the error code if there is no
-# output file name and the rename of the stripped (or copied) file
-# fails, yet the command fails to do anything. This fixes both
-# objcopy and strip.
-#
-#Signed-off-by: John Bowler <jbowler@acm.org>
-
---- binutils-2.16/binutils/objcopy.c.orig 2006-01-31 11:15:38.797318519 -0800
-+++ binutils-2.16/binutils/objcopy.c 2006-01-31 11:15:40.463318516 -0800
-@@ -2434,7 +2434,8 @@ strip_main (int argc, char *argv[])
- if (preserve_dates)
- set_times (tmpname, &statbuf);
- if (output_file == NULL)
-- smart_rename (tmpname, argv[i], preserve_dates);
-+ if (smart_rename (tmpname, argv[i], preserve_dates))
-+ hold_status = 1;
- status = hold_status;
- }
- else
-@@ -3013,7 +3014,8 @@ copy_main (int argc, char *argv[])
- {
- if (preserve_dates)
- set_times (tmpname, &statbuf);
-- smart_rename (tmpname, input_filename, preserve_dates);
-+ if (smart_rename (tmpname, input_filename, preserve_dates))
-+ status = 1;
- }
- else
- unlink (tmpname);
+++ /dev/null
-# The ARM->Thumb glue uses an ldr of the target function address, this
-# simply doesn't work for PIC code, changed to use 4 word PIC glue
-#
---- binutils-2.16/.pc/binutils-2.16-thumb-glue.patch/bfd/elf32-arm.c 2005-09-18 03:52:15.465165051 -0700
-+++ binutils-2.16/bfd/elf32-arm.c 2005-09-18 03:52:33.546302825 -0700
-@@ -1493,19 +1493,20 @@
- return myh;
- }
-
--/* ARM->Thumb glue:
-+/* ARM->Thumb glue (PIC version):
-
- .arm
- __func_from_arm:
- ldr r12, __func_addr
-+ add r12, r12, pc @ pc is __func_addr, so r12 is func
- bx r12
- __func_addr:
-- .word func @ behave as if you saw a ARM_32 reloc. */
-+ .word func-.+1 @ offset to actual function, low bit set */
-
--#define ARM2THUMB_GLUE_SIZE 12
--static const insn32 a2t1_ldr_insn = 0xe59fc000;
--static const insn32 a2t2_bx_r12_insn = 0xe12fff1c;
--static const insn32 a2t3_func_addr_insn = 0x00000001;
-+#define ARM2THUMB_GLUE_SIZE 16
-+static const insn32 a2t1_ldr_insn = 0xe59fc004;
-+static const insn32 a2t2_add_r12_insn = 0xe08fc00c;
-+static const insn32 a2t3_bx_r12_insn = 0xe12fff1c;
-
- /* Thumb->ARM: Thumb->(non-interworking aware) ARM
-
-@@ -2187,6 +2188,8 @@
-
- if ((my_offset & 0x01) == 0x01)
- {
-+ long int ret_offset;
-+
- if (sym_sec != NULL
- && sym_sec->owner != NULL
- && !INTERWORK_FLAG (sym_sec->owner))
-@@ -2203,12 +2206,31 @@
- bfd_put_32 (output_bfd, (bfd_vma) a2t1_ldr_insn,
- s->contents + my_offset);
-
-- bfd_put_32 (output_bfd, (bfd_vma) a2t2_bx_r12_insn,
-+ bfd_put_32 (output_bfd, (bfd_vma) a2t2_add_r12_insn,
- s->contents + my_offset + 4);
-
-- /* It's a thumb address. Add the low order bit. */
-- bfd_put_32 (output_bfd, val | a2t3_func_addr_insn,
-+ bfd_put_32 (output_bfd, (bfd_vma) a2t3_bx_r12_insn,
- s->contents + my_offset + 8);
-+
-+ /* Calculate the offset to the actual function. */
-+ ret_offset =
-+ /* Address of destination of the stub. */
-+ ((bfd_signed_vma) val)
-+ - ((bfd_signed_vma)
-+ /* Offset from the start of the current section
-+ to the start of the stubs. */
-+ (s->output_offset
-+ /* Offset of the start of this stub from the start of the stubs. */
-+ + my_offset
-+ /* Address of the start of the current section. */
-+ + s->output_section->vma)
-+ /* The word is 12 bytes into the stub. */
-+ + 12
-+ /* The destination is a thumb function so the bottom bit must be set. */
-+ - 1);
-+
-+ bfd_put_32 (output_bfd, (bfd_vma) ret_offset,
-+ s->contents + my_offset + 12);
- }
-
- BFD_ASSERT (my_offset <= globals->arm_glue_size);
+++ /dev/null
---- binutils-2.16/.pc/binutils-2.16-thumb-trampoline.patch/bfd/elf32-arm.c 2005-05-02 12:43:06.000000000 -0700
-+++ binutils-2.16/bfd/elf32-arm.c 2005-09-19 22:58:49.834931044 -0700
-@@ -24,6 +24,8 @@
- #include "libbfd.h"
- #include "elf-bfd.h"
-
-+#define NOTE_DEBUG 0
-+
- #ifndef NUM_ELEM
- #define NUM_ELEM(a) (sizeof (a) / (sizeof (a)[0]))
- #endif
-@@ -1127,6 +1129,10 @@
- used, we need to record the index into .got.plt instead of
- recomputing it from the PLT offset. */
- bfd_signed_vma plt_got_offset;
-+
-+ /* This is used to sanity check that the Thumb trampoline space
-+ really was allocated. */
-+ int accomodate_trampoline;
- };
-
- /* Traverse an arm ELF linker hash table. */
-@@ -1219,9 +1225,15 @@
- table, string));
- if (ret != NULL)
- {
-+#if NOTE_DEBUG
-+ _bfd_error_handler(
-+ _("NOTE: %x(%s): New hash entry (plt refcount %d)"),
-+ ret, string, ret->root.plt.refcount);
-+#endif
- ret->relocs_copied = NULL;
- ret->plt_thumb_refcount = 0;
- ret->plt_got_offset = -1;
-+ ret->accomodate_trampoline = 0;
- }
-
- return (struct bfd_hash_entry *) ret;
-@@ -1335,16 +1347,38 @@
- eind->relocs_copied = NULL;
- }
-
-- /* If the direct symbol already has an associated PLT entry, the
-- indirect symbol should not. If it doesn't, swap refcount information
-- from the indirect symbol. */
-- if (edir->plt_thumb_refcount == 0)
-+ if (ind->root.type == bfd_link_hash_indirect)
- {
-- edir->plt_thumb_refcount = eind->plt_thumb_refcount;
-- eind->plt_thumb_refcount = 0;
-+ bfd_signed_vma tmp;
-+ bfd_signed_vma lowest_valid = bed->can_refcount;
-+
-+ /* If the direct symbol already has an associated PLT entry, the
-+ indirect symbol should not. If it doesn't, swap refcount information
-+ from the indirect symbol. */
-+#if NOTE_DEBUG
-+ _bfd_error_handler(_("NOTE: %x(%s,%d,%d) <== %x(%s,%d,%d)"),
-+ dir, dir->root.root.string, dir->plt.refcount, edir->plt_thumb_refcount,
-+ ind, ind->root.root.string, ind->plt.refcount, eind->plt_thumb_refcount);
-+#endif
-+
-+ /* Copy over the global and procedure linkage table refcount entries.
-+ These may have been already set up by a check_relocs routine. This
-+ code duplicates that for the plt refcount in elf.c
-+ _bfd_elf_link_hash_copy_indirect */
-+ tmp = dir->plt.refcount;
-+ /* this obfuscated test evaluates to bed->can_refcount && plt.refcount == 0
-+ * || plt.refcount < 0.
-+ */
-+ if (tmp < lowest_valid)
-+ {
-+ tmp = edir->plt_thumb_refcount;
-+ edir->plt_thumb_refcount = eind->plt_thumb_refcount;
-+ eind->plt_thumb_refcount = tmp;
-+ BFD_ASSERT(eind->accomodate_trampoline == 0);
-+ }
-+ else
-+ BFD_ASSERT (eind->plt_thumb_refcount == 0);
- }
-- else
-- BFD_ASSERT (eind->plt_thumb_refcount == 0);
-
- _bfd_elf_link_hash_copy_indirect (bed, dir, ind);
- }
-@@ -2060,7 +2094,7 @@
- (*_bfd_error_handler)
- (_("%B(%s): warning: interworking not enabled.\n"
- " first occurrence: %B: thumb call to arm"),
-- sym_sec->owner, input_bfd, name);
-+ sym_sec->owner, name, input_bfd);
-
- return FALSE;
- }
-@@ -2165,7 +2199,7 @@
- (*_bfd_error_handler)
- (_("%B(%s): warning: interworking not enabled.\n"
- " first occurrence: %B: arm call to thumb"),
-- sym_sec->owner, input_bfd, name);
-+ sym_sec->owner, name, input_bfd);
- }
-
- --my_offset;
-@@ -2481,7 +2515,7 @@
- instruction instead ? */
- if (sym_flags != STT_ARM_TFUNC)
- (*_bfd_error_handler)
-- (_("\%B: Warning: Arm BLX instruction targets Arm function '%s'."),
-+ (_("%B: Warning: Arm BLX instruction targets Arm function '%s'."),
- input_bfd,
- h ? h->root.root.string : "(local)");
- }
-@@ -2697,6 +2731,20 @@
- /* Handle calls via the PLT. */
- if (h != NULL && splt != NULL && h->plt.offset != (bfd_vma) -1)
- {
-+ struct elf32_arm_link_hash_entry *eh;
-+ eh = (struct elf32_arm_link_hash_entry *) h;
-+ if (!eh->accomodate_trampoline)
-+ {
-+ /* %B of output_bfd crashes here, so %x is used instead */
-+ _bfd_error_handler(
-+ _("ERROR: %B: %x(%s): missing thumb trampoline, refcount(thumb %d, plt %d) in %x at %x+%x+%x"),
-+ input_bfd, h, h->root.root.string, eh->plt_thumb_refcount,
-+ h->plt.refcount, output_bfd, splt->output_section->vma,
-+ splt->output_offset, h->plt.offset);
-+ /* The relocation would point to garbage, it gets skipped... */
-+ return bfd_reloc_dangerous;
-+ }
-+
- value = (splt->output_section->vma
- + splt->output_offset
- + h->plt.offset);
-@@ -3525,8 +3573,9 @@
- {
- _bfd_error_handler
- (_("ERROR: Source object %B has EABI version %d, but target %B has EABI version %d"),
-- ibfd, obfd,
-+ ibfd,
- (in_flags & EF_ARM_EABIMASK) >> 24,
-+ obfd,
- (out_flags & EF_ARM_EABIMASK) >> 24);
- return FALSE;
- }
-@@ -3538,8 +3587,9 @@
- {
- _bfd_error_handler
- (_("ERROR: %B is compiled for APCS-%d, whereas target %B uses APCS-%d"),
-- ibfd, obfd,
-+ ibfd,
- in_flags & EF_ARM_APCS_26 ? 26 : 32,
-+ obfd,
- out_flags & EF_ARM_APCS_26 ? 26 : 32);
- flags_compatible = FALSE;
- }
-@@ -3903,10 +3953,18 @@
- eh = (struct elf32_arm_link_hash_entry *) h;
-
- if (h->plt.refcount > 0)
-+ h->plt.refcount -= 1;
-+
-+ if (ELF32_R_TYPE (rel->r_info) == R_ARM_THM_PC22)
- {
-- h->plt.refcount -= 1;
-- if (ELF32_R_TYPE (rel->r_info) == R_ARM_THM_PC22)
-- eh->plt_thumb_refcount--;
-+ BFD_ASSERT (eh->plt_thumb_refcount > 0);
-+ eh->plt_thumb_refcount--;
-+ BFD_ASSERT (eh->accomodate_trampoline == 0);
-+#if NOTE_DEBUG
-+ _bfd_error_handler(
-+ _("NOTE: %B: %x(%s): Thumb refcount decremented to %d (plt refcount %d)"),
-+ abfd, h, h->root.root.string, eh->plt_thumb_refcount, h->plt.refcount);
-+#endif
- }
-
- if (r_type == R_ARM_ABS32
-@@ -3994,6 +4052,10 @@
- h = sym_hashes[r_symndx - symtab_hdr->sh_info];
-
- eh = (struct elf32_arm_link_hash_entry *) h;
-+#if NOTE_DEBUG
-+ if (h != NULL)
-+ _bfd_error_handler(_("NOTE: %B: %x(%s): verify relocation"), abfd, h, h->root.root.string);
-+#endif
-
- switch (r_type)
- {
-@@ -4078,10 +4140,30 @@
-
- /* If we create a PLT entry, this relocation will reference
- it, even if it's an ABS32 relocation. */
-- h->plt.refcount += 1;
-+ if (h->plt.refcount >= 0)
-+ h->plt.refcount += 1;
-+ else
-+ {
-+ /* This happens, I suspect it happens with glue code because,
-+ * somehow, the backend data had can_refcount==0. Expert required...
-+ */
-+ _bfd_error_handler(
-+ _("WARNING: %B: %x(%s): PLT refcount was %d (set to 1)"),
-+ abfd, h, h->root.root.string, h->plt.refcount);
-+ h->plt.refcount = 1;
-+ }
-
- if (r_type == R_ARM_THM_PC22)
-- eh->plt_thumb_refcount += 1;
-+ {
-+ eh->plt_thumb_refcount += 1;
-+ BFD_ASSERT (eh->plt_thumb_refcount <= h->plt.refcount);
-+ BFD_ASSERT (eh->accomodate_trampoline == 0);
-+#if NOTE_DEBUG
-+ _bfd_error_handler(
-+ _("NOTE: %B: %x(%s): Thumb refcount incremented to %d (plt refcount %d)"),
-+ abfd, h, h->root.root.string, eh->plt_thumb_refcount, h->plt.refcount);
-+#endif
-+ }
- }
-
- /* If we are creating a shared library or relocatable executable,
-@@ -4376,8 +4458,15 @@
- object, or if all references were garbage collected. In
- such a case, we don't actually need to build a procedure
- linkage table, and we can just do a PC24 reloc instead. */
-+#if NOTE_DEBUG
-+ _bfd_error_handler(
-+ _("NOTE: %x(%s): Thumb refcount zeroed (plt refcount %d, thumb %d) (%s)"),
-+ h, h->root.root.string, h->plt.refcount, eh->plt_thumb_refcount,
-+ SYMBOL_CALLS_LOCAL (info, h) ? "local call" : "invisible");
-+#endif
- h->plt.offset = (bfd_vma) -1;
- eh->plt_thumb_refcount = 0;
-+ BFD_ASSERT (eh->accomodate_trampoline == 0);
- h->needs_plt = 0;
- }
-
-@@ -4390,8 +4479,14 @@
- in check_relocs. We can't decide accurately between function
- and non-function syms in check-relocs; Objects loaded later in
- the link may change h->type. So fix it now. */
-+#if NOTE_DEBUG
-+ _bfd_error_handler(
-+ _("NOTE: %x(%s): Thumb refcount zeroed (%d, plt refcount %d)"),
-+ h, h->root.root.string, eh->plt_thumb_refcount, h->plt.refcount);
-+#endif
- h->plt.offset = (bfd_vma) -1;
- eh->plt_thumb_refcount = 0;
-+ BFD_ASSERT (eh->accomodate_trampoline == 0);
- }
-
- /* If this is a weak symbol, and there is a real definition, the
-@@ -4521,8 +4616,14 @@
- for it. */
- if (!htab->symbian_p && eh->plt_thumb_refcount > 0)
- {
-+#if NOTE_DEBUG
-+ _bfd_error_handler(_("NOTE: %x(%s): Thumb trampoline created at %x"),
-+ h, h->root.root.string, h->plt.offset);
-+#endif
- h->plt.offset += PLT_THUMB_STUB_SIZE;
- s->size += PLT_THUMB_STUB_SIZE;
-+ BFD_ASSERT (eh->accomodate_trampoline == 0);
-+ eh->accomodate_trampoline = 1;
- }
-
- /* If this symbol is not defined in a regular file, and we are
-@@ -5014,10 +5115,20 @@
-
- if (eh->plt_thumb_refcount > 0)
- {
-- bfd_put_16 (output_bfd, elf32_arm_plt_thumb_stub[0],
-- splt->contents + h->plt.offset - 4);
-- bfd_put_16 (output_bfd, elf32_arm_plt_thumb_stub[1],
-- splt->contents + h->plt.offset - 2);
-+ if (eh->accomodate_trampoline == 1)
-+ {
-+ bfd_put_16 (output_bfd, elf32_arm_plt_thumb_stub[0],
-+ splt->contents + h->plt.offset - 4);
-+ bfd_put_16 (output_bfd, elf32_arm_plt_thumb_stub[1],
-+ splt->contents + h->plt.offset - 2);
-+ }
-+ else
-+ {
-+ (*_bfd_error_handler) (
-+ _("%B: no space for THUMB trampoline at %x[%x]"),
-+ output_bfd, h->plt.offset, got_offset);
-+ return FALSE;
-+ }
- }
-
- bfd_put_32 (output_bfd, elf32_arm_plt_entry[0] | ((got_displacement & 0x0ff00000) >> 20),
+++ /dev/null
-diff -urN binutils-2.16.91.0.7.orig/configure binutils-2.16.91.0.7/configure
---- binutils-2.16.91.0.7.orig/configure 2006-05-31 14:54:24.000000000 +0300
-+++ binutils-2.16.91.0.7/configure 2006-05-31 14:55:53.000000000 +0300
-@@ -1299,7 +1299,7 @@
- arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
- noconfigdirs="$noconfigdirs target-libffi target-qthreads"
- ;;
-- arm*-*-linux-gnueabi)
-+ arm*-*-linux-gnueabi | arm*-*-linux-uclibcgnueabi)
- noconfigdirs="$noconfigdirs target-libffi target-qthreads"
- noconfigdirs="$noconfigdirs target-libjava target-libobjc"
- ;;
-diff -urN binutils-2.16.91.0.7.orig/configure.in binutils-2.16.91.0.7/configure.in
---- binutils-2.16.91.0.7.orig/configure.in 2006-05-31 14:54:24.000000000 +0300
-+++ binutils-2.16.91.0.7/configure.in 2006-05-31 14:55:53.000000000 +0300
-@@ -497,7 +497,7 @@
- arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
- noconfigdirs="$noconfigdirs target-libffi target-qthreads"
- ;;
-- arm*-*-linux-gnueabi)
-+ arm*-*-linux-gnueabi | arm*-*-linux-uclibcgnueabi)
- noconfigdirs="$noconfigdirs target-libffi target-qthreads"
- noconfigdirs="$noconfigdirs target-libjava target-libobjc"
- ;;
+++ /dev/null
-# strip (and objcopy) fail to set the error code if there is no
-# output file name and the rename of the stripped (or copied) file
-# fails, yet the command fails to do anything. This fixes both
-# objcopy and strip.
-#
-# modification by bero: Ported to 2.16.91.0.6
-#
-#Signed-off-by: John Bowler <jbowler@acm.org>
-#Signed-off-by: Bernhard Rosenkraenzer <bero@arklinux.org>
---- binutils-2.16.91.0.6/binutils/objcopy.c.ark 2006-03-11 15:59:07.000000000 +0100
-+++ binutils-2.16.91.0.6/binutils/objcopy.c 2006-03-11 15:59:45.000000000 +0100
-@@ -2593,7 +2593,8 @@
- if (preserve_dates)
- set_times (tmpname, &statbuf);
- if (output_file == NULL)
-- smart_rename (tmpname, argv[i], preserve_dates);
-+ if(smart_rename (tmpname, argv[i], preserve_dates))
-+ hold_status = 1;
- status = hold_status;
- }
- else
-@@ -3184,7 +3185,8 @@
- {
- if (preserve_dates)
- set_times (tmpname, &statbuf);
-- smart_rename (tmpname, input_filename, preserve_dates);
-+ if (smart_rename (tmpname, input_filename, preserve_dates))
-+ status = 1;
- }
- else
- unlink (tmpname);
+++ /dev/null
---- binutils-2.16.91.0.7/bfd/configure
-+++ binutils-2.16.91.0.7/bfd/configure
-@@ -3576,7 +3576,7 @@
- ;;
-
- # This must be Linux ELF.
--linux-gnu*)
-+linux-gnu*|linux-uclibc*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
---- binutils-2.16.91.0.7/binutils/configure
-+++ binutils-2.16.91.0.7/binutils/configure
-@@ -3411,7 +3411,7 @@
- ;;
-
- # This must be Linux ELF.
--linux-gnu*)
-+linux-gnu*|linux-uclibc*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
---- binutils-2.16.91.0.7/configure
-+++ binutils-2.16.91.0.7/configure
-@@ -1270,7 +1270,7 @@
- am33_2.0-*-linux*)
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
- ;;
-- sh-*-linux*)
-+ sh*-*-linux*)
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
- ;;
- sh*-*-pe|mips*-*-pe|*arm-wince-pe)
-@@ -1578,7 +1578,7 @@
- romp-*-*)
- noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
- ;;
-- sh-*-* | sh64-*-*)
-+ sh*-*-* | sh64-*-*)
- case "${host}" in
- i[3456789]86-*-vsta) ;; # don't add gprof back in
- i[3456789]86-*-go32*) ;; # don't add gprof back in
---- binutils-2.16.91.0.7/configure.in
-+++ binutils-2.16.91.0.7/configure.in
-@@ -468,7 +468,7 @@
- am33_2.0-*-linux*)
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
- ;;
-- sh-*-linux*)
-+ sh*-*-linux*)
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
- ;;
- sh*-*-pe|mips*-*-pe|*arm-wince-pe)
-@@ -776,7 +776,7 @@
- romp-*-*)
- noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
- ;;
-- sh-*-* | sh64-*-*)
-+ sh*-*-* | sh64-*-*)
- case "${host}" in
- i[[3456789]]86-*-vsta) ;; # don't add gprof back in
- i[[3456789]]86-*-go32*) ;; # don't add gprof back in
---- binutils-2.16.91.0.7/gas/configure
-+++ binutils-2.16.91.0.7/gas/configure
-@@ -3411,7 +3411,7 @@
- ;;
-
- # This must be Linux ELF.
--linux-gnu*)
-+linux-gnu*|linux-uclibc*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
---- binutils-2.16.91.0.7/gprof/configure
-+++ binutils-2.16.91.0.7/gprof/configure
-@@ -3419,6 +3419,11 @@
- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
- ;;
-
-+linux-uclibc*)
-+ lt_cv_deplibs_check_method=pass_all
-+ lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+ ;;
-+
- netbsd* | knetbsd*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
---- binutils-2.16.91.0.7/ld/configure
-+++ binutils-2.16.91.0.7/ld/configure
-@@ -3413,7 +3413,7 @@
- ;;
-
- # This must be Linux ELF.
--linux-gnu*)
-+linux-gnu*|linux-uclibc*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
---- binutils-2.16.91.0.7/libtool.m4
-+++ binutils-2.16.91.0.7/libtool.m4
-@@ -739,7 +739,7 @@
- ;;
-
- # This must be Linux ELF.
--linux-gnu*)
-+linux-gnu*|linux-uclibc*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
---- binutils-2.16.91.0.7/ltconfig
-+++ binutils-2.16.91.0.7/ltconfig
-@@ -602,6 +602,7 @@
-
- # Transform linux* to *-*-linux-gnu*, to support old configure scripts.
- case $host_os in
-+linux-uclibc*) ;;
- linux-gnu*) ;;
- linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
- esac
-@@ -1247,7 +1248,7 @@
- ;;
-
- # This must be Linux ELF.
--linux-gnu*)
-+linux-gnu*|linux-uclibc*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
---- binutils-2.16.91.0.7/opcodes/configure
-+++ binutils-2.16.91.0.7/opcodes/configure
-@@ -3579,7 +3579,7 @@
- ;;
-
- # This must be Linux ELF.
--linux-gnu*)
-+linux-gnu*|linux-uclibc*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
+++ /dev/null
-#!/bin/sh -e
-## 001_ld_makefile_patch.dpatch
-##
-## All lines beginning with `## DP:' are a description of the patch.
-## DP: Description: correct where ld scripts are installed
-## DP: Author: Chris Chimelis <chris@debian.org>
-## DP: Upstream status: N/A
-## DP: Date: ??
-
-if [ $# -ne 1 ]; then
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1
-fi
-
-[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
-
-case "$1" in
- -patch) patch $patch_opts -p1 < $0;;
- -unpatch) patch $patch_opts -p1 -R < $0;;
- *)
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1;;
-esac
-
-exit 0
-
-@DPATCH@
---- binutils-2.16.91.0.1/ld/Makefile.am
-+++ binutils-2.16.91.0.1/ld/Makefile.am
-@@ -20,7 +20,7 @@
- # We put the scripts in the directory $(scriptdir)/ldscripts.
- # We can't put the scripts in $(datadir) because the SEARCH_DIR
- # directives need to be different for native and cross linkers.
--scriptdir = $(tooldir)/lib
-+scriptdir = $(libdir)
-
- EMUL = @EMUL@
- EMULATION_OFILES = @EMULATION_OFILES@
---- binutils-2.16.91.0.1/ld/Makefile.in
-+++ binutils-2.16.91.0.1/ld/Makefile.in
-@@ -268,7 +268,7 @@
- # We put the scripts in the directory $(scriptdir)/ldscripts.
- # We can't put the scripts in $(datadir) because the SEARCH_DIR
- # directives need to be different for native and cross linkers.
--scriptdir = $(tooldir)/lib
-+scriptdir = $(libdir)
- BASEDIR = $(srcdir)/..
- BFDDIR = $(BASEDIR)/bfd
- INCDIR = $(BASEDIR)/include
+++ /dev/null
-#!/bin/sh -e
-## 006_better_file_error.dpatch by David Kimdon <dwhedon@gordian.com>
-##
-## All lines beginning with `## DP:' are a description of the patch.
-## DP: Specify which filename is causing an error if the filename is a
-## DP: directory. (#45832)
-
-if [ $# -ne 1 ]; then
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1
-fi
-
-[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
-
-case "$1" in
- -patch) patch $patch_opts -p1 < $0;;
- -unpatch) patch $patch_opts -p1 -R < $0;;
- *)
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1;;
-esac
-
-exit 0
-
-@DPATCH@
-diff -urNad /home/james/debian/packages/binutils/binutils-2.14.90.0.6/bfd/opncls.c binutils-2.14.90.0.6/bfd/opncls.c
---- /home/james/debian/packages/binutils/binutils-2.14.90.0.6/bfd/opncls.c 2003-07-23 16:08:09.000000000 +0100
-+++ binutils-2.14.90.0.6/bfd/opncls.c 2003-09-10 22:35:00.000000000 +0100
-@@ -150,6 +150,13 @@
- {
- bfd *nbfd;
- const bfd_target *target_vec;
-+ struct stat s;
-+
-+ if (stat (filename, &s) == 0)
-+ if (S_ISDIR(s.st_mode)) {
-+ bfd_set_error (bfd_error_file_not_recognized);
-+ return NULL;
-+ }
-
- nbfd = _bfd_new_bfd ();
- if (nbfd == NULL)
+++ /dev/null
-#!/bin/sh -e
-## 012_check_ldrunpath_length.dpatch by Chris Chimelis <chris@debian.org>
-##
-## All lines beginning with `## DP:' are a description of the patch.
-## DP: Only generate an RPATH entry if LD_RUN_PATH is not empty, for
-## DP: cases where -rpath isn't specified. (#151024)
-
-if [ $# -ne 1 ]; then
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1
-fi
-
-[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
-
-case "$1" in
- -patch) patch $patch_opts -p1 < $0;;
- -unpatch) patch $patch_opts -p1 -R < $0;;
- *)
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1;;
-esac
-
-exit 0
-
-@DPATCH@
-diff -urNad /home/james/debian/packages/binutils/new/binutils-2.15/ld/emultempl/elf32.em binutils-2.15/ld/emultempl/elf32.em
---- /home/james/debian/packages/binutils/new/binutils-2.15/ld/emultempl/elf32.em 2004-05-21 23:12:58.000000000 +0100
-+++ binutils-2.15/ld/emultempl/elf32.em 2004-05-21 23:12:59.000000000 +0100
-@@ -692,6 +692,8 @@
- && command_line.rpath == NULL)
- {
- lib_path = (const char *) getenv ("LD_RUN_PATH");
-+ if ((lib_path) && (strlen (lib_path) == 0))
-+ lib_path = NULL;
- if (gld${EMULATION_NAME}_search_needed (lib_path, &n,
- force))
- break;
-@@ -871,6 +873,8 @@
- rpath = command_line.rpath;
- if (rpath == NULL)
- rpath = (const char *) getenv ("LD_RUN_PATH");
-+ if ((rpath) && (strlen (rpath) == 0))
-+ rpath = NULL;
- if (! (bfd_elf_size_dynamic_sections
- (output_bfd, command_line.soname, rpath,
- command_line.filter_shlib,
+++ /dev/null
-require binutils_${PV}.bb
-require binutils-cross-sdk.inc
-PR = "r0"
+++ /dev/null
-require binutils_${PV}.bb
-require binutils-cross-sdk.inc
-PR = "r3"
+++ /dev/null
-require binutils_${PV}.bb
-require binutils-cross-sdk.inc
-PR = "r3"
+++ /dev/null
-require binutils_${PV}.bb
-require binutils-cross.inc
-FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/binutils-${PV}"
+++ /dev/null
-require binutils_${PV}.bb
-require binutils-cross.inc
-FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/binutils-${PV}"
+++ /dev/null
-FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/binutils-${PV}"
-require binutils_${PV}.bb
-require binutils-cross.inc
+++ /dev/null
-require binutils_${PV}.bb
-require binutils-cross.inc
-FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/binutils-${PV}"
+++ /dev/null
-require binutils_csl-arm-2005q3-2.bb
-require binutils-cross.inc
-S = "${WORKDIR}/binutils-2.17pre"
DESCRIPTION = "A GNU collection of binary utilities"
HOMEPAGE = "http://www.gnu.org/software/binutils/"
SECTION = "devel"
-LICENSE = "GPL"
+LICENSE = "GPLv2"
inherit autotools gettext
+++ /dev/null
-DESCRIPTION = "A GNU collection of binary utilities"
-HOMEPAGE = "http://www.gnu.org/software/binutils/"
-SECTION = "devel"
-LICENSE = "GPL"
-PR = "r3"
-
-inherit autotools gettext
-
-PACKAGES += "${PN}-symlinks"
-
-FILES_${PN} = " \
- ${bindir}/${TARGET_PREFIX}* \
- ${libdir}/lib*-*.so \
- ${prefix}/${TARGET_SYS}/bin/*"
-
-FILES_${PN}-dev = " \
- ${includedir} \
- ${libdir}/*.a \
- ${libdir}/*.la \
- ${libdir}/libbfd.so \
- ${libdir}/libopcodes.so"
-
-FILES_${PN}-symlinks = " \
- ${bindir}/addr2line \
- ${bindir}/ar \
- ${bindir}/as \
- ${bindir}/c++filt \
- ${bindir}/gprof \
- ${bindir}/ld \
- ${bindir}/nm \
- ${bindir}/objcopy \
- ${bindir}/objdump \
- ${bindir}/ranlib \
- ${bindir}/readelf \
- ${bindir}/size \
- ${bindir}/strings \
- ${bindir}/strip"
-
-SRC_URI = \
- "http://ftp.kernel.org/pub/linux/devel/binutils/binutils-${PV}.tar.bz2 \
- file://ld_makefile.patch;patch=1 \
- file://better_file_error.patch;patch=1 \
- file://signed_char_fix.patch;patch=1 \
- file://objdump_fix.patch;patch=1 \
- file://binutils-100_cflags_for_build.patch;patch=1 \
- file://binutils-2.15.91.0.1-uclibc-100-conf.patch;patch=1 \
- file://binutils-2.15.90.0.3-uclibc-200-build_modules.patch;patch=1 \
- file://binutils-2.15-allow-gcc-4.0.patch;patch=1"
-S = "${WORKDIR}/binutils-${PV}"
-B = "${S}/build.${HOST_SYS}.${TARGET_SYS}"
-
-EXTRA_OECONF = "--program-prefix=${TARGET_PREFIX} \
- --enable-shared"
-
-# This is necessary due to a bug in the binutils Makefiles
-EXTRA_OEMAKE = "configure-build-libiberty all"
-
-export AR = "${HOST_PREFIX}ar"
-export AS = "${HOST_PREFIX}as"
-export LD = "${HOST_PREFIX}ld"
-export NM = "${HOST_PREFIX}nm"
-export RANLIB = "${HOST_PREFIX}ranlib"
-export OBJCOPY = "${HOST_PREFIX}objcopy"
-export OBJDUMP = "${HOST_PREFIX}objdump"
-
-export AR_FOR_TARGET = "${TARGET_PREFIX}ar"
-export AS_FOR_TARGET = "${TARGET_PREFIX}as"
-export LD_FOR_TARGET = "${TARGET_PREFIX}ld"
-export NM_FOR_TARGET = "${TARGET_PREFIX}nm"
-export RANLIB_FOR_TARGET = "${TARGET_PREFIX}ranlib"
-
-export CC_FOR_HOST = "${CCACHE} ${HOST_PREFIX}gcc ${HOST_CC_ARCH}"
-export CXX_FOR_HOST = "${CCACHE} ${HOST_PREFIX}gcc ${HOST_CC_ARCH}"
-
-export CC_FOR_BUILD = "${BUILD_CC}"
-export CPP_FOR_BUILD = "${BUILD_CPP}"
-export CFLAGS_FOR_BUILD = "${BUILD_CFLAGS}"
-
-export CC = "${CCACHE} ${HOST_PREFIX}gcc ${HOST_CC_ARCH}"
-
-do_configure () {
- (cd ${S}; gnu-configize) || die "Failed to run gnu-configize"
- oe_runconf
-}
-
-do_stage () {
- oe_libinstall -so -a -C opcodes libopcodes ${STAGING_LIBDIR}/
- oe_libinstall -a -C libiberty libiberty ${STAGING_LIBDIR}/
- oe_libinstall -so -a -C bfd libbfd ${STAGING_LIBDIR}/
- install -m 0644 ${S}/include/dis-asm.h ${STAGING_INCDIR}/
- install -m 0644 ${S}/include/symcat.h ${STAGING_INCDIR}/
- install -m 0644 ${S}/include/libiberty.h ${STAGING_INCDIR}/
- install -m 0644 ${S}/include/ansidecl.h ${STAGING_INCDIR}/
- install -m 0644 ${S}/include/bfdlink.h ${STAGING_INCDIR}/
- install -m 0644 bfd/bfd.h ${STAGING_INCDIR}/
-}
-
-do_install () {
- autotools_do_install
-
- # We don't really need these, so we'll remove them...
- rm -rf ${D}${libdir}/ldscripts
-
- # Fix the /usr/${TARGET_SYS}/bin/* links
- for l in ${D}${prefix}/${TARGET_SYS}/bin/*; do
- rm -f $l
- ln -sf `echo ${prefix}/${TARGET_SYS}/bin \
- | tr -s / \
- | sed -e 's,^/,,' -e 's,[^/]*,..,g'`${bindir}/${TARGET_PREFIX}`basename $l` $l
- done
-
- # Install the libiberty header
- install -d ${D}${includedir}
- install -m 644 ${S}/include/ansidecl.h ${D}${includedir}
- install -m 644 ${S}/include/libiberty.h ${D}${includedir}
-
- cd ${D}${bindir}
-
- # Symlinks for ease of running these on the native target
- for p in ${TARGET_SYS}-* ; do
- ln -sf $p `echo $p | sed -e s,${TARGET_SYS}-,,`
- done
-}
+++ /dev/null
-DESCRIPTION = "A GNU collection of binary utilities"
-HOMEPAGE = "http://www.gnu.org/software/binutils/"
-SECTION = "devel"
-LICENSE = "GPL"
-DEFAULT_PREFERENCE = "-1"
-
-inherit autotools gettext
-
-PACKAGES += "${PN}-symlinks"
-
-FILES_${PN} = " \
- ${bindir}/${TARGET_PREFIX}* \
- ${libdir}/lib*-*.so \
- ${prefix}/${TARGET_SYS}/bin/*"
-
-FILES_${PN}-dev = " \
- ${includedir} \
- ${libdir}/*.a \
- ${libdir}/*.la \
- ${libdir}/libbfd.so \
- ${libdir}/libopcodes.so"
-
-FILES_${PN}-symlinks = " \
- ${bindir}/addr2line \
- ${bindir}/ar \
- ${bindir}/as \
- ${bindir}/c++filt \
- ${bindir}/gprof \
- ${bindir}/ld \
- ${bindir}/nm \
- ${bindir}/objcopy \
- ${bindir}/objdump \
- ${bindir}/ranlib \
- ${bindir}/readelf \
- ${bindir}/size \
- ${bindir}/strings \
- ${bindir}/strip"
-
-SRC_URI = "\
- http://ftp.kernel.org/pub/linux/devel/binutils/binutils-${PV}.tar.bz2 \
- file://binutils-2.16.91.0.6-objcopy-rename-errorcode.patch;patch=1 \
- file://binutils-uclibc-100-uclibc-conf.patch;patch=1 \
- file://binutils-uclibc-300-001_ld_makefile_patch.patch;patch=1 \
- file://binutils-uclibc-300-006_better_file_error.patch;patch=1 \
- file://binutils-uclibc-300-012_check_ldrunpath_length.patch;patch=1 \
- file://binutils-uclibc-400-mips-ELF_MAXPAGESIZE-4K.patch;patch=1 \
- file://binutils-uclibc-702-binutils-skip-comments.patch;patch=1 \
- file://binutils-configure-texinfo-version.patch;patch=1"
-
-S = "${WORKDIR}/binutils-${PV}"
-B = "${S}/build.${HOST_SYS}.${TARGET_SYS}"
-
-EXTRA_OECONF = "--program-prefix=${TARGET_PREFIX} \
- --enable-shared"
-
-# This is necessary due to a bug in the binutils Makefiles
-EXTRA_OEMAKE = "configure-build-libiberty all"
-
-export AR = "${HOST_PREFIX}ar"
-export AS = "${HOST_PREFIX}as"
-export LD = "${HOST_PREFIX}ld"
-export NM = "${HOST_PREFIX}nm"
-export RANLIB = "${HOST_PREFIX}ranlib"
-export OBJCOPY = "${HOST_PREFIX}objcopy"
-export OBJDUMP = "${HOST_PREFIX}objdump"
-
-export AR_FOR_TARGET = "${TARGET_PREFIX}ar"
-export AS_FOR_TARGET = "${TARGET_PREFIX}as"
-export LD_FOR_TARGET = "${TARGET_PREFIX}ld"
-export NM_FOR_TARGET = "${TARGET_PREFIX}nm"
-export RANLIB_FOR_TARGET = "${TARGET_PREFIX}ranlib"
-
-export CC_FOR_HOST = "${CCACHE} ${HOST_PREFIX}gcc ${HOST_CC_ARCH}"
-export CXX_FOR_HOST = "${CCACHE} ${HOST_PREFIX}gcc ${HOST_CC_ARCH}"
-
-export CC_FOR_BUILD = "${BUILD_CC}"
-export CPP_FOR_BUILD = "${BUILD_CPP}"
-export CFLAGS_FOR_BUILD = "${BUILD_CFLAGS}"
-
-export CC = "${CCACHE} ${HOST_PREFIX}gcc ${HOST_CC_ARCH}"
-
-do_configure () {
- (cd ${S}; gnu-configize) || die "Failed to run gnu-configize"
- oe_runconf
-}
-
-do_stage () {
- oe_libinstall -so -a -C opcodes libopcodes ${STAGING_LIBDIR}/
- oe_libinstall -a -C libiberty libiberty ${STAGING_LIBDIR}/
- oe_libinstall -so -a -C bfd libbfd ${STAGING_LIBDIR}/
- install -m 0644 ${S}/include/dis-asm.h ${STAGING_INCDIR}/
- install -m 0644 ${S}/include/symcat.h ${STAGING_INCDIR}/
- install -m 0644 ${S}/include/libiberty.h ${STAGING_INCDIR}/
- install -m 0644 ${S}/include/ansidecl.h ${STAGING_INCDIR}/
- install -m 0644 ${S}/include/bfdlink.h ${STAGING_INCDIR}/
- install -m 0644 bfd/bfd.h ${STAGING_INCDIR}/
-}
-
-do_install () {
- autotools_do_install
-
- # We don't really need these, so we'll remove them...
- rm -rf ${D}${libdir}/ldscripts
-
- # Fix the /usr/${TARGET_SYS}/bin/* links
- for l in ${D}${prefix}/${TARGET_SYS}/bin/*; do
- rm -f $l
- ln -sf `echo ${prefix}/${TARGET_SYS}/bin \
- | tr -s / \
- | sed -e 's,^/,,' -e 's,[^/]*,..,g'`${bindir}/${TARGET_PREFIX}`basename $l` $l
- done
-
- # Install the libiberty header
- install -d ${D}${includedir}
- install -m 644 ${S}/include/ansidecl.h ${D}${includedir}
- install -m 644 ${S}/include/libiberty.h ${D}${includedir}
-
- cd ${D}${bindir}
-
- # Symlinks for ease of running these on the native target
- for p in ${TARGET_SYS}-* ; do
- ln -sf $p `echo $p | sed -e s,${TARGET_SYS}-,,`
- done
-}
+++ /dev/null
-require binutils.inc
-
-PR = "r8"
-
-SRC_URI = "\
- http://ftp.gnu.org/gnu/binutils/binutils-${PV}.tar.bz2 \
- file://ld_makefile.patch;patch=1 \
- file://better_file_error.patch;patch=1 \
- file://signed_char_fix.patch;patch=1 \
- file://binutils-2.16-objcopy-rename-errorcode.patch;patch=1 \
- file://binutils-100_cflags_for_build.patch;patch=1"
-
-# uclibc patches
-SRC_URI += "file://binutils-2.16-linux-uclibc.patch;patch=1"
-
-# thumb support patches
-SRC_URI += "file://binutils-2.16-thumb-trampoline.patch;patch=1"
-SRC_URI += "file://binutils-2.16-thumb-glue.patch;patch=1"
+++ /dev/null
-require binutils.inc
-
-PR = "r1"
-
-SRC_URI = "\
- http://www.kernel.org/pub/linux/devel/binutils/binutils-${PV}.tar.bz2 \
- file://binutils-2.16.91.0.6-objcopy-rename-errorcode.patch;patch=1 \
- file://binutils-uclibc-100-uclibc-conf.patch;patch=1 \
- file://110-arm-eabi-conf.patch;patch=1 \
- file://binutils-uclibc-300-001_ld_makefile_patch.patch;patch=1 \
- file://binutils-uclibc-300-006_better_file_error.patch;patch=1 \
- file://binutils-uclibc-300-012_check_ldrunpath_length.patch;patch=1 \
- "
+++ /dev/null
-DESCRIPTION = "A GNU collection of binary utilities"
-HOMEPAGE = "http://www.gnu.org/software/binutils/"
-SECTION = "devel"
-LICENSE = "GPL"
-DEFAULT_PREFERENCE = "-1"
-
-BINV = "2.16"
-PV = "2.16+csl-arm-2005q3-2"
-
-FILESDIR = "${FILE_DIRNAME}/binutils-${PV}"
-
-S = "${WORKDIR}/binutils-2.17pre"
-
-inherit autotools gettext
-
-PACKAGES = "${PN} ${PN}-dev ${PN}-doc ${PN}-symlinks"
-
-FILES_${PN} = " \
- ${bindir}/${TARGET_PREFIX}* \
- ${libdir}/lib*-*.so \
- ${prefix}/${TARGET_SYS}/bin/*"
-
-FILES_${PN}-dev = " \
- ${includedir} \
- ${libdir}/*.a \
- ${libdir}/*.la \
- ${libdir}/libbfd.so \
- ${libdir}/libopcodes.so"
-
-FILES_${PN}-symlinks = " \
- ${bindir}/addr2line \
- ${bindir}/ar \
- ${bindir}/as \
- ${bindir}/c++filt \
- ${bindir}/gprof \
- ${bindir}/ld \
- ${bindir}/nm \
- ${bindir}/objcopy \
- ${bindir}/objdump \
- ${bindir}/ranlib \
- ${bindir}/readelf \
- ${bindir}/size \
- ${bindir}/strings \
- ${bindir}/strip"
-
-SRC_URI = "http://www.codesourcery.com/public/gnu_toolchain/arm-none-linux-gnueabi/arm-2005q3-2-arm-none-linux-gnueabi.src.tar.bz2 \
- file://binutils-configure-texinfo-version.patch;patch=1"
-
-do_unpack2() {
- cd ${WORKDIR}
- pwd
- tar -xvjf ./arm-2005q3-2-arm-none-linux-gnueabi/binutils-2005q3-2.tar.bz2
-}
-
-addtask unpack2 after do_unpack before do_patch
-
-B = "${S}/build.${HOST_SYS}.${TARGET_SYS}"
-
-EXTRA_OECONF = "--program-prefix=${TARGET_PREFIX} \
- --enable-shared"
-
-# This is necessary due to a bug in the binutils Makefiles
-EXTRA_OEMAKE = "configure-build-libiberty all"
-
-export AR = "${HOST_PREFIX}ar"
-export AS = "${HOST_PREFIX}as"
-export LD = "${HOST_PREFIX}ld"
-export NM = "${HOST_PREFIX}nm"
-export RANLIB = "${HOST_PREFIX}ranlib"
-export OBJCOPY = "${HOST_PREFIX}objcopy"
-export OBJDUMP = "${HOST_PREFIX}objdump"
-
-export AR_FOR_TARGET = "${TARGET_PREFIX}ar"
-export AS_FOR_TARGET = "${TARGET_PREFIX}as"
-export LD_FOR_TARGET = "${TARGET_PREFIX}ld"
-export NM_FOR_TARGET = "${TARGET_PREFIX}nm"
-export RANLIB_FOR_TARGET = "${TARGET_PREFIX}ranlib"
-
-export CC_FOR_HOST = "${CCACHE} ${HOST_PREFIX}gcc ${HOST_CC_ARCH}"
-export CXX_FOR_HOST = "${CCACHE} ${HOST_PREFIX}gcc ${HOST_CC_ARCH}"
-
-export CC_FOR_BUILD = "${BUILD_CC}"
-export CPP_FOR_BUILD = "${BUILD_CPP}"
-export CFLAGS_FOR_BUILD = "${BUILD_CFLAGS}"
-
-export CC = "${CCACHE} ${HOST_PREFIX}gcc ${HOST_CC_ARCH}"
-
-do_configure () {
- (cd ${S}; gnu-configize) || die "Failed to run gnu-configize"
- oe_runconf
-}
-
-do_stage () {
- oe_libinstall -so -a -C opcodes libopcodes ${STAGING_LIBDIR}/
- oe_libinstall -a -C libiberty libiberty ${STAGING_LIBDIR}/
- oe_libinstall -so -a -C bfd libbfd ${STAGING_LIBDIR}/
- install -m 0644 ${S}/include/dis-asm.h ${STAGING_INCDIR}/
- install -m 0644 ${S}/include/symcat.h ${STAGING_INCDIR}/
- install -m 0644 ${S}/include/libiberty.h ${STAGING_INCDIR}/
- install -m 0644 ${S}/include/ansidecl.h ${STAGING_INCDIR}/
- install -m 0644 ${S}/include/bfdlink.h ${STAGING_INCDIR}/
- install -m 0644 bfd/bfd.h ${STAGING_INCDIR}/
-}
-
-do_install () {
- autotools_do_install
-
- # We don't really need these, so we'll remove them...
- rm -rf ${D}${libdir}/ldscripts
-
- # Fix the /usr/${TARGET_SYS}/bin/* links
- for l in ${D}${prefix}/${TARGET_SYS}/bin/*; do
- rm -f $l
- ln -sf `echo ${prefix}/${TARGET_SYS}/bin \
- | tr -s / \
- | sed -e 's,^/,,' -e 's,[^/]*,..,g'`${bindir}/${TARGET_PREFIX}`basename $l` $l
- done
-
- # Install the libiberty header
- install -d ${D}${includedir}
- install -m 644 ${S}/include/ansidecl.h ${D}${includedir}
- install -m 644 ${S}/include/libiberty.h ${D}${includedir}
-
- cd ${D}${bindir}
-
- # Symlinks for ease of running these on the native target
- for p in ${TARGET_SYS}-* ; do
- ln -sf $p `echo $p | sed -e s,${TARGET_SYS}-,,`
- done
-}
