+++ /dev/null
---- bluez-utils-2.24/tools/hciattach.c.orig 2005-12-10 15:14:36.000000000 +0100
-+++ bluez-utils-2.24/tools/hciattach.c 2006-01-22 13:56:13.000000000 +0100
-@@ -57,6 +57,8 @@
- #define HCI_UART_3WIRE 2
- #define HCI_UART_H4DS 3
-
-+#include "ti_bts.h"
-+
- struct uart_t {
- char *type;
- int m_id;
-@@ -66,6 +68,7 @@
- int speed;
- int flags;
- int (*init) (int fd, struct uart_t *u, struct termios *ti);
-+ char *bts; /* bluetooth script */
- };
-
- #define FLOW_CTL 0x0001
-@@ -241,6 +244,114 @@
- return 0;
- }
-
-+static int brf6150(int fd, struct uart_t *u, struct termios *ti)
-+{
-+ bts_t *bfp;
-+ int i;
-+ unsigned long vers;
-+ unsigned char actionbuf[256];
-+ unsigned char resp[128]; /* Response */
-+ unsigned long count;
-+ unsigned short atype;
-+
-+ if (u->bts == NULL) /* no script, ignore */
-+ return 0;
-+
-+ bfp = bts_load_script( u->bts, &vers );
-+ if (bfp == NULL)
-+ return -1;
-+
-+ fprintf( stderr, "Loading BTS script version %lu\n", vers );
-+
-+ while ((count = bts_next_action( bfp, actionbuf,
-+ sizeof actionbuf - 1, &atype )) != 0) {
-+ if (atype == ACTION_REMARKS) {
-+ if (actionbuf[0] != 0)
-+ fprintf( stderr, "%s\n", actionbuf );
-+ }
-+ else if (atype == ACTION_SEND_COMMAND) {
-+#if 0
-+ fprintf( stderr, "ACTION_SEND_COMMAND: ", (int)atype );
-+ for (i=0; i<count; i++) {
-+ fprintf( stderr, "0x%02x ", actionbuf[i] );
-+ }
-+ fprintf( stderr, "\n" );
-+#endif
-+ int n;
-+ n = write(fd, actionbuf, count);
-+ if (n < 0 || n < count) {
-+ perror("Failed to write TI action command");
-+ return -1;
-+ }
-+ }
-+ else if (atype == ACTION_WAIT_EVENT) {
-+ action_wait_t *wait = (action_wait_t *)actionbuf;
-+#if 0
-+ fprintf( stderr, "ACTION_WAIT_EVENT: %u msec, %u size, data = ", wait->msec, wait->size );
-+ for (i=0; i<wait->size; i++) {
-+ fprintf( stderr, "0x%02x ", wait->data[i] );
-+ }
-+ fprintf( stderr, "\n" );
-+#endif
-+ usleep(wait->msec); /* seems they give usec, not msec */
-+ /* Read reply. */
-+ if ((count = read_hci_event(fd, resp, sizeof resp)) < 0) {
-+ perror("Failed to read TI command response");
-+ return -1;
-+ }
-+ if (count < wait->size) {
-+ fprintf( stderr, "TI command response is short.");
-+ }
-+ for (i=0; i<wait->size; i++) {
-+ if (i == 3) continue; /* ignore */
-+ if (resp[i] != wait->data[i]) {
-+ fprintf( stderr, "TI command response does not match expected result.\n" );
-+ }
-+ }
-+ }
-+ else if (atype == ACTION_SERIAL_PORT_PARAMETERS) {
-+ action_serial_t *sercmd = (action_serial_t *)actionbuf;
-+
-+ /* Set actual baudrate */
-+ fprintf( stderr,
-+ "BTS changing baud rate to %u, flow control to %u\n",
-+ sercmd->baud, sercmd->flow_control );
-+
-+ tcflush(fd, TCIOFLUSH);
-+
-+ if (sercmd->flow_control)
-+ ti->c_cflag |= CRTSCTS;
-+ else
-+ ti->c_cflag &= ~CRTSCTS;
-+ if (tcsetattr(fd, TCSANOW, ti) < 0) {
-+ perror("Can't set port settings");
-+ return -1;
-+ }
-+
-+ u->speed = sercmd->baud;
-+
-+ tcflush(fd, TCIOFLUSH);
-+ if (set_speed(fd, ti, sercmd->baud) < 0) {
-+ perror("Can't set baud rate");
-+ return -1;
-+ }
-+ }
-+ else if (atype == ACTION_DELAY) {
-+ action_delay_t *delay = (action_delay_t *)actionbuf;
-+ usleep(delay->msec); /* seems they give usec, not msec */
-+ }
-+ else {
-+ fprintf( stderr, "BTS action type = %d: ", (int)atype );
-+ for (i=0; i<count; i++) {
-+ fprintf( stderr, "0x%02x ", actionbuf[i] );
-+ }
-+ fprintf( stderr, "\n" );
-+ }
-+ }
-+ bts_unload_script( bfp );
-+ return 0;
-+}
-+
- static int texas(int fd, struct uart_t *u, struct termios *ti)
- {
- struct timespec tm = {0, 50000};
-@@ -281,14 +392,25 @@
- } while (resp[4] != cmd[1] && resp[5] != cmd[2]);
-
- /* Verify manufacturer */
-- if ((resp[11] & 0xFF) != 0x0d)
-+ if (resp[11] != 0x0d)
- fprintf(stderr,"WARNING : module's manufacturer is not Texas Instrument\n");
-
- /* Print LMP version */
-- fprintf(stderr, "Texas module LMP version : 0x%02x\n", resp[10] & 0xFF);
-+ fprintf(stderr, "TI module LMP version : 0x%02x\n", resp[10]);
-
- /* Print LMP subversion */
-- fprintf(stderr, "Texas module LMP sub-version : 0x%02x%02x\n", resp[14] & 0xFF, resp[13] & 0xFF);
-+ fprintf(stderr, "TI module LMP sub-version : 0x%02x%02x\n", resp[14], resp[13]);
-+ if ((resp[14] >> 2) == 3) {
-+ int err;
-+ nanosleep(&tm, NULL);
-+
-+ /* BRF6150 */
-+ if ((err=brf6150( fd, u, ti )) != 0) {
-+ fprintf( stderr, "TI script failed (err=%d)\n",
-+ err );
-+ return -1;
-+ }
-+ }
-
- nanosleep(&tm, NULL);
- return 0;
-@@ -953,7 +1075,7 @@
- {
- printf("hciattach - HCI UART driver initialization utility\n");
- printf("Usage:\n");
-- printf("\thciattach [-n] [-p] [-b] [-t timeout] [-s initial_speed] <tty> <type | id> [speed] [flow|noflow]\n");
-+ printf("\thciattach [-n] [-p] [-b] [-t timeout] [-s initial_speed] [-S bts-script] <tty> <type | id> [speed] [flow|noflow]\n");
- printf("\thciattach -l\n");
- }
-
-@@ -970,11 +1092,12 @@
- pid_t pid;
- struct sigaction sa;
- char dev[PATH_MAX];
-+ char *bts = NULL;
-
- detach = 1;
- printpid = 0;
-
-- while ((opt=getopt(argc, argv, "bnpt:s:l")) != EOF) {
-+ while ((opt=getopt(argc, argv, "bnpt:s:S:l")) != EOF) {
- switch(opt) {
- case 'b':
- send_break = 1;
-@@ -996,6 +1119,10 @@
- init_speed = atoi(optarg);
- break;
-
-+ case 'S':
-+ bts = optarg;
-+ break;
-+
- case 'l':
- for (i = 0; uart[i].type; i++) {
- printf("%-10s0x%04x,0x%04x\n", uart[i].type,
-@@ -1067,6 +1194,8 @@
- if (init_speed)
- u->init_speed = init_speed;
-
-+ u->bts = bts;
-+
- memset(&sa, 0, sizeof(sa));
- sa.sa_flags = SA_NOCLDSTOP;
- sa.sa_handler = sig_alarm;
---- bluez-utils-2.24/tools/Makefile.am.orig 2005-12-03 07:22:16.000000000 +0100
-+++ bluez-utils-2.24/tools/Makefile.am 2006-01-22 13:53:59.000000000 +0100
-@@ -37,6 +37,9 @@
-
- noinst_PROGRAMS = hcisecfilter ppporc
-
-+hciattach_SOURCES = hciattach.c ti_bts.h ti_bts.c
-+hciattach_LDADD = @BLUEZ_LIBS@
-+
- hciconfig_SOURCES = hciconfig.c csr.h csr.c
- hciconfig_LDADD = @BLUEZ_LIBS@ $(top_builddir)/common/libtextfile.a
-
---- bluez-utils-2.24/tools/ti_bts.h.orig 2006-01-22 13:56:38.000000000 +0100
-+++ bluez-utils-2.24/tools/ti_bts.h 2006-01-22 13:53:59.000000000 +0100
-@@ -0,0 +1,116 @@
-+/*
-+ * Copyright (c) 2005 Texas Instruments, Inc.
-+ * Ported by SDG Systems, LLC
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation;
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
-+ * IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
-+ * CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ *
-+ * ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
-+ * COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
-+ * SOFTWARE IS DISCLAIMED.
-+ *
-+ */
-+
-+#ifndef BT_SCRIPT_H
-+#define BT_SCRIPT_H
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+/*
-+ * Define the interface of Bluetooth Script
-+ */
-+
-+typedef void bts_t;
-+
-+
-+#define ACTION_SEND_COMMAND 1 /* Send out raw data (as is) */
-+#define ACTION_WAIT_EVENT 2 /* Wait for data */
-+#define ACTION_SERIAL_PORT_PARAMETERS 3
-+#define ACTION_DELAY 4
-+#define ACTION_RUN_SCRIPT 5
-+#define ACTION_REMARKS 6
-+
-+/*
-+ * Structure for ACTION_SEND_COMMAND
-+ */
-+typedef struct tagCActionCommand
-+{
-+ unsigned char data[1]; /* Data to send */
-+} action_command_t;
-+
-+/*
-+ * Structure for ACTION_WAIT_EVENT
-+ */
-+typedef struct tagCActionWaitEvent
-+{
-+ unsigned long msec; /* in milliseconds */
-+ unsigned long size;
-+ unsigned char data[1]; /* Data to wait for */
-+} action_wait_t;
-+
-+
-+/*
-+ * Structure for ACTION_SERIAL_PORT_PARAMETERS
-+ */
-+typedef struct tagCActionSerialPortParameters
-+{
-+ unsigned long baud;
-+ unsigned long flow_control;
-+} action_serial_t;
-+
-+/* Flow Control Type */
-+#define FCT_NONE 0
-+#define FCT_HARDWARE 1
-+
-+#define DONT_CHANGE 0xFFFFFFFF /* For both baud rate and flow control */
-+
-+
-+/*
-+ * Structure for ACTION_DELAY
-+ */
-+typedef struct tagCActionDelay
-+{
-+ unsigned long msec; /* in milliseconds */
-+} action_delay_t;
-+
-+/*
-+ * Structure for ACTION_RUN_SCRIPT
-+ */
-+typedef struct tagCActionRunScript
-+{
-+ char filename[1];
-+} action_run_t;
-+
-+/*
-+ * Structure for ACTION_REMARKS
-+ */
-+typedef struct tagCActionRemarks
-+{
-+ char m_szRemarks[1];
-+} action_remarks_t;
-+
-+
-+const char *cis_create_filename(const unsigned char* cmdparms);
-+bts_t * bts_load_script(const char* fname, unsigned long* version);
-+unsigned long bts_next_action(const bts_t* bts_fp, unsigned char* action_buf,
-+ unsigned long nMaxSize, unsigned short* ptype);
-+void bts_unload_script(bts_t* bts_fp);
-+
-+#ifdef __cplusplus
-+};
-+#endif
-+
-+#endif /* BT_SCRIPT_H */
-+
---- bluez-utils-2.24/tools/ti_bts.c.orig 2006-01-22 13:56:36.000000000 +0100
-+++ bluez-utils-2.24/tools/ti_bts.c 2006-01-22 13:56:31.000000000 +0100
-@@ -0,0 +1,149 @@
-+/*
-+ * Copyright (c) 2005 Texas Instruments, Inc.
-+ * Ported by SDG Systems, LLC
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation;
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
-+ * IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
-+ * CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ *
-+ * ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
-+ * COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
-+ * SOFTWARE IS DISCLAIMED.
-+ *
-+ */
-+
-+
-+#include <stdio.h>
-+#include <stdlib.h>
-+#include "ti_bts.h"
-+
-+#ifndef MAKEWORD
-+#define MAKEWORD(a, b) ((unsigned short)(((unsigned char)(a)) | ((unsigned short)((unsigned char)(b))) << 8))
-+#endif
-+
-+#define TI_MANUFACTURER_ID 13
-+
-+/*
-+ * Common Init Script specific
-+ */
-+const char *
-+cis_create_filename(const unsigned char* cmdparms)
-+{
-+ static char bts_file[50];
-+
-+ /* Check for TI's id */
-+ unsigned short manfid = MAKEWORD(cmdparms[8], cmdparms[9]);
-+
-+ if (TI_MANUFACTURER_ID == manfid) {
-+ unsigned short version = MAKEWORD(cmdparms[10], cmdparms[11]);
-+
-+ unsigned short chip = (version & 0x7C00) >> 10;
-+ unsigned short min_ver = (version & 0x007F);
-+ unsigned short maj_ver = (version & 0x0380) >> 7;
-+
-+ if (0 != (version & 0x8000)) {
-+ maj_ver |= 0x0008;
-+ }
-+
-+ sprintf( bts_file, "TIInit_%d.%d.%d.bts",
-+ (int)chip, (int)maj_ver, (int)min_ver);
-+
-+ return &bts_file[0];
-+ }
-+ return NULL;
-+}
-+
-+typedef struct tagCHeader
-+{
-+ unsigned long magic;
-+ unsigned long version;
-+ unsigned char future[24];
-+} cheader_t;
-+
-+
-+/* The value 0x42535442 stands for (in ASCII) BTSB */
-+/* which is Bluetooth Script Binary */
-+#define FILE_HEADER_MAGIC 0x42535442
-+
-+
-+bts_t *
-+bts_load_script(const char* fname, unsigned long* version)
-+{
-+ bts_t* bts = NULL;
-+ FILE* fp = fopen(fname, "rb");
-+
-+ if (NULL != fp) {
-+ /* Read header */
-+ cheader_t header;
-+
-+ /* Read header */
-+ if (1 == fread(&header, sizeof(header), 1, fp)) {
-+ /* Check magic number for correctness */
-+ if (header.magic == FILE_HEADER_MAGIC) {
-+ /* If user wants the version number */
-+ if (NULL != version) {
-+ *version = header.version;
-+ }
-+ bts = (bts_t*)fp;
-+ }
-+ }
-+ /* If failed reading the file, close it */
-+ if (NULL == bts) {
-+ fclose(fp);
-+ }
-+ }
-+ return bts;
-+}
-+
-+unsigned long
-+bts_next_action(const bts_t* bts_fp, unsigned char* action_buf,
-+ unsigned long nMaxSize, unsigned short* ptype)
-+{
-+ unsigned long bytes = 0;
-+ FILE* fp = (FILE*)bts_fp;
-+ unsigned char action_hdr[4];
-+
-+ if (bts_fp == NULL)
-+ return 0;
-+
-+ /* Each Action has the following: */
-+ /* UINT16 type of this action */
-+ /* UINT16 size of rest */
-+ /* BYTE[] action buffer (for HCI, includes the type byte e.g. 1 for hci command) */
-+
-+ if (1 == fread(&action_hdr[0], sizeof(action_hdr), 1, fp)) {
-+ unsigned short type = *(unsigned short*)&action_hdr[0];
-+ unsigned short size = *(unsigned short*)&action_hdr[2];
-+
-+ if (size <= nMaxSize) {
-+ int nread = fread(action_buf, sizeof(action_buf[0]), size, fp);
-+
-+ if (nread == size) {
-+ *ptype = type;
-+ bytes = (unsigned long)size;
-+ }
-+ }
-+ }
-+
-+ return bytes;
-+}
-+
-+void
-+bts_unload_script(bts_t* bts_fp)
-+{
-+ FILE* fp = (FILE*)bts_fp;
-+
-+ if (NULL != fp) {
-+ fclose(fp);
-+ }
-+}
-+
