This release provides a huge improvement regarding the support for SPL
to more boards.
We now uses this and migrated following boards:
- imx6qpsabresd -> imx6qdlsabresd
- imx6qsabresd -> imx6qdlsabresd
- imx6dlsabresd -> imx6qdlsabresd
- imx6solosabresd -> imx6qdlsabresd
- imx6qpsabreauto -> imx6qdlsabreauto
- imx6qsabreauto -> imx6qdlsabreauto
- imx6dlsabreauto -> imx6qdlsabreauto
- imx6solosabreauto -> imx6qdlsabreauto
So now, the 8 boards are covered by 2 machine files. This drastically
reduces the build time and allow for a better user experience as we
can use the same image to test different boards.
In summary an image built for imx6qdlsabresd or imx6qdlsabreauto is
capable of run on a its respective board which contains a i.MX6
QuadPlus, Quad, Dual, DualLite or Solo SoC removing the need of a
specific image for each SoC type.
On top of the official 2017.07 release, following patches are
included:
801fd44563 mx6sabreauto: Make Ethernet functional again
8ccb1970b8 wandboard: Set fdt based on board_rev and board_name
e6605743e5 mx6sabresd: Enable video interfaces in bootargs
e50a2475d4 mx6sabresd: Use LDO dtb file until LDO bypass support is added
b1a4715311 mx6slevk: Use LDO dtb file until LDO bypass support is added
957409876b imx: cx9020: try pxe boot, if no vmlinuz on mmc
3608315bf1 imx: cx9020: use fdt_addr_r and ramdisk_addr_r
9a1c960516 mx6sabreauto: Add Falcon mode support
3a279e5fe8 warp: Use PARTUUID to specify the rootfs location
0f9a6703e7 embestmx6boards: Use PARTUUID to specify the rootfs location
c877510614 mx6cuboxi: Use PARTUUID to specify the rootfs location
0ada2d6caf wandboard: Use PARTUUID to specify the rootfs location
eee442362c mx6sabre: Use PARTUUID to specify the rootfs location
80a56615fa mx6sabreauto: Do not enable WEIM by default
321339efd7 imx: reorganize IMX code as other SOCs
1567ce3edc mmc: fsl_esdhc: drop CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT
40294f880d dm: mmc: fsl_esdhc: handle vqmmc supply
0378edcd02 mmc: fsl_esdhc: introduce vs18_enable for 1.8V fix I/O
3657cae890 mmc: fsl_esdhc: correct type of wp_enable
45103e1030 imx6_spl: Add u-boot-dtb.img for SPL payload
61131fa4b5 mx6sabreauto: Update to SPL only mode
07a667be9b mx6qsabreauto: Add SPL support
4506c859ee mx6cuboxi: Add support for sata
a5c5962327 mx7dsabresd: Set VLD04 output to 2.8V in PMIC initialization.
4590f11b61 mx6: soc: Move mxs_dma_init() into the mxs nand driver
10d185960e net: fec_mxc: fix PHY initialization bug with CONFIG_DM_ETH
b2d4bf303e icorem6_rqs: Rename icorem6_rqs config file
af34708e1e dt-bindings: Document the Broadcom STB wake-up timer node
3e92667cfe serial: mxc: Add debug uart support
4e2b31a5c5 serial: mxc: Code cleanup
27835dae1a serial: mxc: Move common baud gen into _mxc_serial_setbrg
1ca9fe11fd serial: mxc: Move common init into _mxc_serial_init
14ac9d06be serial: mxc: Move cr1 and cr2 write to mxc_serial_setbrg
fdd1f0debc serial: mxc: Use RFDIV in dm-code
fd008b0569 serial: mxc: Add common mxc_uart reg space
2fd7878124 imx: mx6ull: fix USB bmode for i.MX 6UL and 6ULL
5c72de6152 ot1200: enable CONFIG_IMX_THERMAL for detailed thermal information
8e38f54c56 mx6sabresd: Fix guard file symbol
3320a872b0 wandboard: Remove unnecessary delay
d5ae3ce6dd cm_fx6: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
1325b822da cgtqmx6eval: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
844365a5a0 mx6slevk_spl: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
ff9e6d62ed mx6sabresd: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
# The sdcard requires the rootfs filesystem to be built before using
# it so we must make this dependency explicit.
-IMAGE_TYPEDEP_sdcard += "${@d.getVar('SDCARD_ROOTFS', 1).split('.')[-1]}"
+IMAGE_TYPEDEP_sdcard_append = " ${@d.getVar('SDCARD_ROOTFS', 1).split('.')[-1]}"
# In case we are building for i.MX23 or i.MX28 we need to have the
# image stream built before the sdcard generation
-IMAGE_TYPEDEP_sdcard += " \
+IMAGE_TYPEDEP_sdcard_append = " \
${@bb.utils.contains('IMAGE_FSTYPES', 'uboot-mxsboot-sdcard', 'uboot-mxsboot-sdcard', '', d)} \
${@bb.utils.contains('IMAGE_FSTYPES', 'barebox-mxsboot-sdcard', 'barebox-mxsboot-sdcard', '', d)} \
"
+++ /dev/null
-#@TYPE: Machine
-#@NAME: NXP i.MX6DL SABRE Automotive
-#@SOC: i.MX6DL
-#@DESCRIPTION: Machine configuration for NXP i.MX6DL SABRE Automotive
-#@MAINTAINER: Daiane Angolini <daiane.angolini@nxp.com>
-
-MACHINEOVERRIDES =. "mx6:mx6dl:"
-
-require conf/machine/include/imx6sabreauto-common.inc
-
-KERNEL_DEVICETREE = "imx6dl-sabreauto.dtb imx6dl-sabreauto-gpmi-weim.dtb imx6dl-sabreauto-ecspi.dtb \
- imx6dl-sabreauto-flexcan1.dtb imx6dl-sabreauto-enetirq.dtb"
-
-UBOOT_CONFIG ??= "sd"
-UBOOT_CONFIG[sd] = "mx6dlsabreauto_config,sdcard"
-UBOOT_CONFIG[eimnor] = "mx6dlsabreauto_eimnor_config"
-UBOOT_CONFIG[nand] = "mx6dlsabreauto_nand_config,ubifs"
-UBOOT_CONFIG[spinor] = "mx6dlsabreauto_spinor_config"
-UBOOT_CONFIG[mfgtool] = "mx6dlsabreauto_config"
+++ /dev/null
-#@TYPE: Machine
-#@NAME: NXP i.MX6DL SABRE Smart Device
-#@SOC: i.MX6DL
-#@DESCRIPTION: Machine configuration for NXP i.MX6DL SABRE Smart Device
-#@MAINTAINER: Otavio Salvador <otavio@ossystems.com.br>
-
-MACHINEOVERRIDES =. "mx6:mx6dl:"
-
-require conf/machine/include/imx6sabresd-common.inc
-
-KERNEL_DEVICETREE = "imx6dl-sabresd.dtb imx6dl-sabresd-ldo.dtb imx6dl-sabresd-hdcp.dtb \
- imx6dl-sabresd-enetirq.dtb imx6dl-sabresd-btwifi.dtb"
-
-UBOOT_CONFIG ??= "sd"
-UBOOT_CONFIG[sd] = "mx6dlsabresd_config,sdcard"
-UBOOT_CONFIG[epdc] = "mx6dlsabresd_epdc_config"
-UBOOT_CONFIG[mfgtool] = "mx6dlsabresd_config"
-
-MACHINE_FIRMWARE += "firmware-imx-epdc"
--- /dev/null
+#@TYPE: Machine
+#@NAME: NXP i.MX6QP/Q/DL SABRE Automotive
+#@SOC: i.MX6QP/Q/DL
+#@DESCRIPTION: Machine configuration for NXP i.MX6QP/Q/DL SABRE Automotive
+#@MAINTAINER: Daiane Angolini <daiane.angolini@nxp.com>
+#
+# This machine replaces the following machines:
+# * imx6qpsabreauto
+# * imx6qsabreauto
+# * imx6dlsabreauto
+# * imx6solosabreauto
+# and is able to work for all the machines.
+
+MACHINEOVERRIDES =. "mx6:mx6q:mx6dl:"
+
+require conf/machine/include/imx-base.inc
+require conf/machine/include/tune-cortexa9.inc
+
+KERNEL_DEVICETREE = " \
+ imx6qp-sabreauto.dtb imx6qp-sabreauto-ecspi.dtb imx6qp-sabreauto-flexcan1.dtb \
+ imx6qp-sabreauto-gpmi-weim.dtb \
+ \
+ imx6q-sabreauto.dtb imx6q-sabreauto-gpmi-weim.dtb imx6q-sabreauto-ecspi.dtb \
+ imx6q-sabreauto-flexcan1.dtb imx6q-sabreauto-enetirq.dtb \
+ \
+ imx6dl-sabreauto.dtb imx6dl-sabreauto-gpmi-weim.dtb imx6dl-sabreauto-ecspi.dtb \
+ imx6dl-sabreauto-flexcan1.dtb imx6dl-sabreauto-enetirq.dtb \
+"
+
+UBOOT_MACHINE ?= "mx6sabreauto_defconfig"
+UBOOT_MAKE_TARGET = "all"
+UBOOT_SUFFIX = "img"
+SPL_BINARY = "SPL"
+
+SERIAL_CONSOLE = "115200 ttymxc3"
+
+MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
+
+MACHINE_FEATURES += " pci wifi bluetooth"
--- /dev/null
+#@TYPE: Machine
+#@NAME: NXP i.MX6QP/Q/DL SABRE Smart Device
+#@SOC: i.MX6QP/Q/DL
+#@DESCRIPTION: Machine configuration for NXP i.MX6QP/Q/DL SABRE Smart Device
+#@MAINTAINER: Otavio Salvador <otavio@ossystems.com.br>
+#
+# This machine replaces the following machines:
+# * imx6qpsabresd
+# * imx6qsabresd
+# * imx6dlsabresd
+# * imx6solosabresd
+# and is able to work for all the machines.
+
+MACHINEOVERRIDES =. "mx6:mx6q:mx6dl:"
+
+require conf/machine/include/imx-base.inc
+require conf/machine/include/tune-cortexa9.inc
+
+KERNEL_DEVICETREE = " \
+ imx6qp-sabresd.dtb imx6qp-sabresd-btwifi.dtb imx6qp-sabresd-hdcp.dtb \
+ imx6qp-sabresd-ldo.dtb imx6qp-sabresd-ldo-pcie-cert.dtb \
+ \
+ imx6q-sabresd.dtb imx6q-sabresd-ldo.dtb imx6q-sabresd-hdcp.dtb \
+ imx6q-sabresd-enetirq.dtb imx6q-sabresd-btwifi.dtb \
+ \
+ imx6dl-sabresd.dtb imx6dl-sabresd-ldo.dtb imx6dl-sabresd-hdcp.dtb \
+ imx6dl-sabresd-enetirq.dtb imx6dl-sabresd-btwifi.dtb \
+"
+
+UBOOT_MACHINE ?= "mx6sabresd_defconfig"
+UBOOT_MAKE_TARGET = "all"
+UBOOT_SUFFIX = "img"
+SPL_BINARY = "SPL"
+
+SERIAL_CONSOLE = "115200 ttymxc0"
+
+MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
+
+MACHINE_FEATURES += " pci wifi bluetooth"
+++ /dev/null
-#@TYPE: Machine
-#@NAME: NXP i.MX6Q Plus SABRE Automotive
-#@SOC: i.MX6QP
-#@DESCRIPTION: Machine configuration for NXP i.MX6QP SABRE Automotive
-#@MAINTAINER: Lauren Post <lauren.post@nxp.com>
-
-MACHINEOVERRIDES =. "mx6:mx6q:"
-
-require conf/machine/include/imx6sabreauto-common.inc
-
-KERNEL_DEVICETREE = "imx6qp-sabreauto.dtb imx6qp-sabreauto-ecspi.dtb imx6qp-sabreauto-flexcan1.dtb \
- imx6qp-sabreauto-gpmi-weim.dtb"
-
-PREFERRED_PROVIDER_u-boot = "u-boot-imx"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot-imx"
-PREFERRED_PROVIDER_virtual/kernel = "linux-imx"
-
-UBOOT_CONFIG ??= "sd"
-UBOOT_CONFIG[sd] = "mx6qpsabreauto_config,sdcard"
-UBOOT_CONFIG[eimnor] = "mx6qpsabreauto_eimnor_config"
-UBOOT_CONFIG[nand] = "mx6qpsabreauto_nand_config,ubifs"
-UBOOT_CONFIG[spinor] = "mx6qpsabreauto_spinor_config"
-UBOOT_CONFIG[sata] = "mx6qpsabreauto_sata_config"
-UBOOT_CONFIG[mfgtool] = "mx6qpsabreauto_config"
+++ /dev/null
-#@TYPE: Machine
-#@NAME: NXP i.MX6Q Plus SABRE Smart Device
-#@SOC: i.MX6QP
-#@DESCRIPTION: Machine configuration for NXP i.MX6QP SABRE Smart Device
-#@MAINTAINER: Lauren Post <lauren.post@nxp.com>
-
-MACHINEOVERRIDES =. "mx6:mx6q:"
-
-require conf/machine/include/imx6sabresd-common.inc
-
-KERNEL_DEVICETREE = "imx6qp-sabresd.dtb imx6qp-sabresd-btwifi.dtb imx6qp-sabresd-hdcp.dtb \
- imx6qp-sabresd-ldo.dtb imx6qp-sabresd-ldo-pcie-cert.dtb"
-
-PREFERRED_PROVIDER_u-boot = "u-boot-imx"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot-imx"
-
-UBOOT_CONFIG ??= "sd"
-UBOOT_CONFIG[sd] = "mx6qpsabresd_config,sdcard"
-UBOOT_CONFIG[sata] = "mx6qpsabresd_sata_config"
-UBOOT_CONFIG[mfgtool] = "mx6qpsabresd_config"
+++ /dev/null
-#@TYPE: Machine
-#@NAME: NXP i.MX6Q SABRE Automotive
-#@SOC: i.MX6Q
-#@DESCRIPTION: Machine configuration for NXP i.MX6Q SABRE Automotive
-#@MAINTAINER: Daiane Angolini <daiane.angolini@nxp.com>
-
-MACHINEOVERRIDES =. "mx6:mx6q:"
-
-require conf/machine/include/imx6sabreauto-common.inc
-
-KERNEL_DEVICETREE = "imx6q-sabreauto.dtb imx6q-sabreauto-gpmi-weim.dtb imx6q-sabreauto-ecspi.dtb \
- imx6q-sabreauto-flexcan1.dtb imx6q-sabreauto-enetirq.dtb"
-
-UBOOT_CONFIG ??= "sd"
-UBOOT_CONFIG[sd] = "mx6qsabreauto_config,sdcard"
-UBOOT_CONFIG[eimnor] = "mx6qsabreauto_eimnor_config"
-UBOOT_CONFIG[nand] = "mx6qsabreauto_nand_config,ubifs"
-UBOOT_CONFIG[spinor] = "mx6qsabreauto_spinor_config"
-UBOOT_CONFIG[sata] = "mx6qsabreauto_sata_config"
-UBOOT_CONFIG[mfgtool] = "mx6qsabreauto_config"
+++ /dev/null
-#@TYPE: Machine
-#@NAME: NXP i.MX6Q SABRE Smart Device
-#@SOC: i.MX6Q
-#@DESCRIPTION: Machine configuration for NXP i.MX6Q SABRE Smart Device
-#@MAINTAINER: Otavio Salvador <otavio@ossystems.com.br>
-
-MACHINEOVERRIDES =. "mx6:mx6q:"
-
-require conf/machine/include/imx6sabresd-common.inc
-
-KERNEL_DEVICETREE = "imx6q-sabresd.dtb imx6q-sabresd-ldo.dtb imx6q-sabresd-hdcp.dtb \
- imx6q-sabresd-enetirq.dtb imx6q-sabresd-btwifi.dtb"
-
-UBOOT_CONFIG ??= "sd"
-UBOOT_CONFIG[sd] = "mx6qsabresd_config,sdcard"
-UBOOT_CONFIG[sata] = "mx6qsabresd_sata_config"
-UBOOT_CONFIG[mfgtool] = "mx6qsabresd_config"
+++ /dev/null
-#@TYPE: Machine
-#@NAME: NXP i.MX6Solo SABRE Automotive
-#@SOC: i.MX6S
-#@DESCRIPTION: Machine configuration for NXP i.MX6Solo SABRE Automotive
-
-MACHINEOVERRIDES =. "mx6:mx6dl:"
-
-require conf/machine/include/imx6sabresd-common.inc
-
-KERNEL_DEVICETREE = "imx6dl-sabreauto.dtb"
-
-PREFERRED_PROVIDER_u-boot = "u-boot-imx"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot-imx"
-KERNEL_IMAGETYPE = "zImage"
-
-UBOOT_CONFIG ??= "sd"
-UBOOT_CONFIG[sd] = "mx6solosabreauto_config,sdcard"
-UBOOT_CONFIG[eimnor] = "mx6solosabreauto_eimnor_config"
-UBOOT_CONFIG[nand] = "mx6solosabreauto_nand_config,ubifs"
-UBOOT_CONFIG[spinor] = "mx6solosabreauto_spinor_config"
-UBOOT_CONFIG[mfgtool] = "mx6solosabreauto_config"
+++ /dev/null
-#@TYPE: Machine
-#@NAME: NXP i.MX6Solo SABRE Smart Device
-#@SOC: i.MX6S
-#@DESCRIPTION: Machine configuration for NXP i.MX6Solo SABRE Smart Device
-#@MAINTAINER: Otavio Salvador <otavio@ossystems.com.br>
-
-MACHINEOVERRIDES =. "mx6:mx6dl:"
-
-require conf/machine/include/imx6sabresd-common.inc
-
-KERNEL_DEVICETREE = "imx6dl-sabresd.dtb imx6dl-sabresd-ldo.dtb"
-
-PREFERRED_PROVIDER_u-boot = "u-boot-imx"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot-imx"
-KERNEL_IMAGETYPE = "zImage"
-
-UBOOT_CONFIG ??= "sd"
-UBOOT_CONFIG[sd] = "mx6solosabresd_config,sdcard"
-UBOOT_CONFIG[mfgtool] = "mx6solosabresd_config"
MACHINEOVERRIDES =. "mx6:mx6sx:"
-require conf/machine/include/imx6sabreauto-common.inc
+require conf/machine/include/imx-base.inc
+require conf/machine/include/tune-cortexa9.inc
KERNEL_DEVICETREE = "imx6sx-sabreauto.dtb imx6sx-sabreauto-m4.dtb"
UBOOT_CONFIG[qspi1] = "mx6sxsabreauto_qspi1_config"
UBOOT_CONFIG[nand] = "mx6sxsabreauto_nand_config,ubifs"
UBOOT_CONFIG[mfgtool] = "mx6sxsabreauto_config"
+
+SERIAL_CONSOLE = "115200 ttymxc3"
+
+MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
+
+MACHINE_FEATURES += " pci wifi bluetooth"
MACHINEOVERRIDES =. "mx6:mx6sx:"
-require conf/machine/include/imx6sabresd-common.inc
+require conf/machine/include/imx-base.inc
+require conf/machine/include/tune-cortexa9.inc
KERNEL_DEVICETREE = "imx6sx-sdb.dtb imx6sx-sdb-emmc.dtb imx6sx-sdb-m4.dtb \
imx6sx-sdb-sai.dtb imx6sx-sdb-lcdif1.dtb imx6sx-sdb-ldo.dtb \
UBOOT_CONFIG[qspi2] = "mx6sxsabresd_qspi2_config"
UBOOT_CONFIG[m4fastup] = "mx6sxsabresd_m4fastup_config"
UBOOT_CONFIG[mfgtool] = "mx6sxsabresd_config"
+
+SERIAL_CONSOLE = "115200 ttymxc0"
+
+MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
+
+MACHINE_FEATURES += " pci wifi bluetooth"
MACHINE_ARCH_FILTER = "virtual/kernel"
MACHINE_SOCARCH_FILTER_append_imx = " alsa-lib"
MACHINE_SOCARCH_FILTER_append_imxvpu = " imx-vpu libimxvpuapi imx-codec imx-vpuwrap imx-parser"
-MACHINE_SOCARCH_FILTER_append_imxgpu2d = " virtual/libopenvg virtual/libgles1 virtual/libgles2 virtual/egl virtual/mesa virtual/libgl virtual/libg2d cairo pango weston"
+MACHINE_SOCARCH_FILTER_append_imxgpu2d = " virtual/libopenvg virtual/libgles1 virtual/libgles2 virtual/egl virtual/mesa virtual/libgl virtual/libg2d cairo pango weston gstreamer1.0-plugins-bad"
MACHINE_SOCARCH_FILTER_append_imxpxp = " imx-codec imx-parser"
MACHINE_SOCARCH_FILTER_append_use-mainline-bsp = " \
qtbase \
+++ /dev/null
-# Provides the i.MX6 SABRE AUTO common settings
-
-require conf/machine/include/imx-base.inc
-require conf/machine/include/tune-cortexa9.inc
-
-SERIAL_CONSOLE = "115200 ttymxc3"
-
-MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
-
-MACHINE_FEATURES += " pci wifi bluetooth"
+++ /dev/null
-# Provides the i.MX6 SABRE SD common settings
-
-require conf/machine/include/imx-base.inc
-require conf/machine/include/tune-cortexa9.inc
-
-SERIAL_CONSOLE = "115200 ttymxc0"
-
-MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
-
-MACHINE_FEATURES += " pci wifi bluetooth"
DEPENDS = "openssl"
PROVIDES = "u-boot-mxsboot"
-PV = "v2016.09+git${SRCPV}"
+PV = "v2017.07+git${SRCPV}"
-SRCREV = "a3d27ead69a9e84a7794117cf965af20d0cfec4f"
-SRCBRANCH = "2016.09+fslc"
+SRCREV = "801fd445636a6d136ffb1a991245e183643a8934"
+SRCBRANCH = "2017.07+fslc"
SRC_URI = "git://github.com/Freescale/u-boot-fslc.git;branch=${SRCBRANCH}"
+++ /dev/null
-include u-boot-fslc.inc
-
-PV = "v2017.03+git${SRCPV}"
-
-SRCREV = "ac3b20cdbe5282fbfa46d7fd39358f5ee07e24d9"
-SRCBRANCH = "2017.03+fslc"
--- /dev/null
+include u-boot-fslc.inc
+
+PV = "v2017.07+git${SRCPV}"
+
+SRCREV = "801fd445636a6d136ffb1a991245e183643a8934"
+SRCBRANCH = "2017.07+fslc"
