-LA_OPT_NXP_Software_License v9 August 2019
+LA_OPT_NXP_Software_License v10 December 2019
IMPORTANT. Read the following NXP Software License Agreement ("Agreement")
completely. By selecting the "I Accept" button at the end of this page, or by
Agreement, NXP grants you a worldwide, personal, non-transferable,
non-exclusive, non-sublicensable license, solely for the development of an
Authorized System:
+
(a) to use and reproduce the Licensed Software (and its Derivative Works
prepared under the license in Section 2.2(b)); and
+
(b) for Licensed Software provided to you in source code form (human
readable), to prepare Derivative Works of the Licensed Software.
+
You may not distribute or sublicense the Licensed Software to others under the
license granted in this Section 2.2.
grants you a worldwide, personal, non-transferable, non-exclusive,
non-sublicensable license solely in connection with your manufacturing and
distribution of an Authorized System:
+
(a) to manufacture (or have manufactured), distribute, and market
the Licensed Software (and its Derivative Works prepared under the license in
2.2(b)) in object code (machine readable format) only as part of, or embedded
foregoing, those files marked as .h files ("Header files") may be distributed
in source or object code form, but only as part of, or embedded within
Authorized Systems; and
+
(b) to copy and distribute as needed, solely in connection with an
Authorized System, non-confidential NXP information provided as part of the
Licensed Software for the purpose of maintaining and supporting Authorized
3.1. The licenses granted above in Section 2 only extend to NXP
Intellectual Property Rights that would be infringed by the unmodified Licensed
Software prior to your preparation of any Derivative Work.
+
3.2. The Licensed Software is licensed to you, not sold. Title to
Licensed Software delivered hereunder remains vested in NXP or NXP's licensor
and cannot be assigned or transferred. You are expressly forbidden from selling
or otherwise distributing the Licensed Software, or any portion thereof, except
as expressly permitted herein. This Agreement does not grant to you any implied
rights under any NXP or third party Intellectual Property Rights.
+
3.3. You may not translate, reverse engineer, decompile, or disassemble
the Licensed Software except to the extent applicable law specifically
prohibits such restriction. You must prohibit your subcontractors or customers
(if distribution is permitted) from translating, reverse engineering,
decompiling, or disassembling the Licensed Software except to the extent
applicable law specifically prohibits such restriction.
+
3.4. You must reproduce any and all of NXP's (or its third-party
licensor's) copyright notices and other proprietary legends on copies of
Licensed Software.
+
3.5. If you distribute the Licensed Software to the United States
Government, then the Licensed Software is "restricted computer software" and is
subject to FAR 52.227-19.
+
3.6. You grant to NXP a non-exclusive, non-transferable, irrevocable,
perpetual, worldwide, royalty-free, sub-licensable license under your
Intellectual Property Rights to use without restriction and for any purpose any
suggestion, comment or other feedback related to the Licensed Software
(including, but not limited to, error corrections and bug fixes).
+
3.7. You will not take or fail to take any action that could subject
the Licensed Software to an Excluded License. An Excluded License means any
license that requires, as a condition of use, modification or distribution of
combined and/or distributed with the software be (i) disclosed or distributed
in source code form; (ii) licensed for the purpose of making Derivative Works;
or (iii) redistributable at no charge.
+
3.8. You may not publish or distribute information, results or data
associated with the use of the Licensed Software to anyone other than NXP;
however, you must advise NXP of any results obtained including any problems or
8. TERM AND TERMINATION. This Agreement will remain in effect unless
terminated as provided in this Section.
+
8.1. You may terminate this Agreement immediately upon written notice
to NXP at the address provided below.
+
8.2. Either party may terminate this Agreement if the other party is in
default of any of the terms and conditions of this Agreement, and termination
is effective if the defaulting party fails to correct such default within 30
days after written notice thereof by the non-defaulting party to the defaulting
party at the address below.
+
8.3. Notwithstanding the foregoing, NXP may terminate this Agreement
immediately upon written notice if you: breach any of your confidentiality
obligations or the license restrictions under this Agreement; become bankrupt,
for the benefit of its creditors; enter proceedings for winding up or
dissolution; are dissolved; or are nationalized or become subject to the
expropriation of all or substantially all of your business or assets.
+
8.4. Upon termination of this Agreement, all licenses granted under
Section 2 will expire.
+
8.5. After termination of this Agreement by either party you will
destroy all parts of Licensed Software and its Derivative Works (if any) and
will provide to NXP a statement certifying the same.
+
8.6. Notwithstanding the termination of this Agreement for any reason,
the terms of Sections 1 and 3 through 25 will survive.
warranties whatsoever about compliance with government or public entity
acquisition statutes or regulations, including, without limitation, statutes or
regulations that may relate to pricing, quality, origin or content.
+
14.2. The Licensed Software has been developed at private expense and is a
"Commercial Item" as defined in 48 C.F.R. Section 2.101, consisting of
"Commercial Computer Software", and/or "Commercial Computer Software
23. NOTICES. All notices and communications under this
Agreement will be made in writing, and will be effective when received at the
following addresses:
- NXP: NXP B.V.
- High Tech Campus 60
- 5656 AG Eindhoven
- The Netherlands
- ATTN: Legal Department
+
+ NXP: NXP B.V.
+ High Tech Campus 60
+ 5656 AG Eindhoven
+ The Netherlands
+ ATTN: Legal Department
You: The address provided at registration will be used.
evaluation and demonstration only. Permitted distributions must be similarly
limited. Further rights must be obtained directly from CSR.
+Crank: Use of Crank Software Inc. software is limited to evaluation and
+demonstration only. Permitted distributions must be similarly limited. Further
+rights must be obtained directly from Crank Software Inc.
+
Cypress Semiconductor Corporation: WWD RTOS source code may only be used in
accordance with the Cypress IOT Community License Agreement located at
https://community.cypress.com/terms-and-conditions!input.jspa?displayOnly=true.
+Embedded Systems Academy GmbH (EmSA): Any use of Micro CANopen Plus is subject
+to the acceptance of the license conditions described in the LICENSE.INFO file
+distributed with all example projects and in the documentation and the
+additional clause described below.
+
+Clause 1: Micro CANopen Plus may not be used for any competitive or comparative
+purpose, including the publication of any form of run time or compile time
+metric, without the express permission of EmSA.
+
Future Technology Devices International Ltd.: Future Technology Devices
International software must be used consistent with the terms found here:
http://www.ftdichip.com/Drivers/FTDriverLicenceTerms.htm
by you under the terms of version 2 of the GNU General Public License plus this
exception. An independent module is a module which is not derived from or
based on FreeRTOS.
+
Clause 1: Linking FreeRTOS with other modules is making a combined work based
on FreeRTOS. Thus, the terms and conditions of the GNU General Public License
V2 cover the whole combination.
+
As a special exception, the copyright holders of FreeRTOS give you permission
to link FreeRTOS with independent modules to produce a statically linked
executable, regardless of the license terms of these independent modules, and
provided that you also meet, for each linked independent module, the terms and
conditions of the license of that module. An independent module is a module
which is not derived from or based on FreeRTOS.
+
Clause 2: FreeRTOS may not be used for any competitive or comparative purpose,
including the publication of any form of run time or compile time metric,
without the express permission of Real Time Engineers Ltd. (this is the norm
SanDisk Corporation ("SanDisk"), you must separately obtain the rights to
reproduce and distribute this software in source code form from SanDisk.
Please follow these easy steps to obtain the license and software:
+
(1) Contact your local SanDisk sales representative to obtain the SanDisk
License Agreement.
+
(2) Sign the license agreement. Fax the signed agreement to SanDisk USA
marketing department at 408-542-0403. The license will be valid when fully
executed by SanDisk.
+
(3) If you have specific questions, please send an email to sales@sandisk.com
+
You may only use the SanDisk Corporation Licensed Software on products
compatible with a SanDisk Secure Digital Card. You may not use the SanDisk
Corporation Licensed Software on any memory device product. SanDisk retains
Synopsys/Target Compiler Technologies: Your use of the Synopsys/Target Compiler
Technologies Licensed Software and related documentation is subject to the
following:
+
(1) Duration of the license for the Licensed Software is limited to 12 months,
unless otherwise specified in the license file.
+
(2) The Licensed Software is usable by one user at a time on a single
designated computer, unless otherwise agreed by Synopsys.
+
(3) Licensed Software and documentation are to be used only on a designated
computer at the designated physical address provided by you on the APEX license
form.
+
(4) The Licensed Software is not sub-licensable.
+TARA Systems: Use of TARA Systems GUI technology Embedded Wizard is limited to
+evaluation and demonstration only. Permitted distributions must be similarly
+limited. Further rights must be obtained directly from TARA Systems.
+
Texas Instruments: Your use of Texas Instruments Inc. WiLink8 Licensed Software
is restricted to NXP SoC based systems that include a compatible connectivity
device manufactured by TI.
