+++ /dev/null
-diff -urN binutils-2.16.91.0.7.orig/configure binutils-2.16.91.0.7/configure
---- binutils-2.16.91.0.7.orig/configure 2006-05-31 14:54:24.000000000 +0300
-+++ binutils-2.16.91.0.7/configure 2006-05-31 14:55:53.000000000 +0300
-@@ -1299,7 +1299,7 @@
- arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
- noconfigdirs="$noconfigdirs target-libffi target-qthreads"
- ;;
-- arm*-*-linux-gnueabi)
-+ arm*-*-linux-gnueabi | arm*-*-linux-uclibcgnueabi)
- noconfigdirs="$noconfigdirs target-libffi target-qthreads"
- noconfigdirs="$noconfigdirs target-libjava target-libobjc"
- ;;
-diff -urN binutils-2.16.91.0.7.orig/configure.in binutils-2.16.91.0.7/configure.in
---- binutils-2.16.91.0.7.orig/configure.ac 2006-05-31 14:54:24.000000000 +0300
-+++ binutils-2.16.91.0.7/configure.ac 2006-05-31 14:55:53.000000000 +0300
-@@ -497,7 +497,7 @@
- arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
- noconfigdirs="$noconfigdirs target-libffi target-qthreads"
- ;;
-- arm*-*-linux-gnueabi)
-+ arm*-*-linux-gnueabi | arm*-*-linux-uclibcgnueabi)
- noconfigdirs="$noconfigdirs target-libffi target-qthreads"
- noconfigdirs="$noconfigdirs target-libjava target-libobjc"
- ;;
+++ /dev/null
-# strip (and objcopy) fail to set the error code if there is no
-# output file name and the rename of the stripped (or copied) file
-# fails, yet the command fails to do anything. This fixes both
-# objcopy and strip.
-#
-# modification by bero: Ported to 2.16.91.0.6
-#
-#Signed-off-by: John Bowler <jbowler@acm.org>
-#Signed-off-by: Bernhard Rosenkraenzer <bero@arklinux.org>
----
-# binutils/objcopy.c | 8 +++++---
-# 1 file changed, 5 insertions(+), 3 deletions(-)
-#
-Index: src/binutils/objcopy.c
-===================================================================
---- src.orig/binutils/objcopy.c 2007-08-09 13:26:03.000000000 +0100
-+++ src/binutils/objcopy.c 2007-08-09 16:36:12.000000000 +0100
-@@ -2787,8 +2787,9 @@ strip_main (int argc, char *argv[])
- if (preserve_dates)
- set_times (tmpname, &statbuf);
- if (output_file != tmpname)
-- smart_rename (tmpname, output_file ? output_file : argv[i],
-- preserve_dates);
-+ if (smart_rename (tmpname, output_file ? output_file : argv[i],
-+ preserve_dates))
-+ hold_status = 1;
- status = hold_status;
- }
- else
-@@ -3411,7 +3412,8 @@ copy_main (int argc, char *argv[])
- if (preserve_dates)
- set_times (tmpname, &statbuf);
- if (tmpname != output_filename)
-- smart_rename (tmpname, input_filename, preserve_dates);
-+ if (smart_rename (tmpname, input_filename, preserve_dates))
-+ status = 1;
- }
- else
- unlink_if_ordinary (tmpname);
+++ /dev/null
---- binutils-2.18/configure.orig 2007-10-11 21:09:27.000000000 -0700
-+++ binutils-2.18/configure 2007-10-11 21:10:20.000000000 -0700
-@@ -6128,7 +6128,7 @@ case " $build_configdirs " in
- # For an installed makeinfo, we require it to be from texinfo 4.4 or
- # higher, else we use the "missing" dummy.
- if ${MAKEINFO} --version \
-- | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[4-9]|[5-9])' >/dev/null 2>&1; then
-+ | egrep 'texinfo[^0-9]*(4\.([6-9]|[1-9][0-9])|[5-9]|[1-9][0-9])' >/dev/null 2>&1; then
- :
- else
- MAKEINFO="$MISSING makeinfo"
---- binutils-2.18/configure.ac.orig 2007-10-11 21:10:54.000000000 -0700
-+++ binutils-2.18/configure.ac 2007-10-11 21:11:13.000000000 -0700
-@@ -2403,7 +2403,7 @@ changequote(,)
- # For an installed makeinfo, we require it to be from texinfo 4.4 or
- # higher, else we use the "missing" dummy.
- if ${MAKEINFO} --version \
-- | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[4-9]|[5-9])' >/dev/null 2>&1; then
-+ | egrep 'texinfo[^0-9]*(4\.([6-9]|[1-9][0-9])|[5-9]|[1-9][0-9])' >/dev/null 2>&1; then
- :
- else
- MAKEINFO="$MISSING makeinfo"
+++ /dev/null
---- binutils-2.18.orig/configure
-+++ binutils-2.18/configure
-@@ -2206,7 +2206,7 @@
- am33_2.0-*-linux*)
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
- ;;
-- sh-*-linux*)
-+ sh*-*-linux*)
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
- ;;
- sh*-*-pe|mips*-*-pe|*arm-wince-pe)
-@@ -2504,7 +2504,7 @@
- romp-*-*)
- noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
- ;;
-- sh-*-* | sh64-*-*)
-+ sh*-*-* | sh64-*-*)
- case "${host}" in
- i[3456789]86-*-vsta) ;; # don't add gprof back in
- i[3456789]86-*-go32*) ;; # don't add gprof back in
---- binutils-2.18.orig/gprof/configure
-+++ binutils-2.18/gprof/configure
-@@ -4124,6 +4124,11 @@
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-+linux-uclibc*)
-+ lt_cv_deplibs_check_method=pass_all
-+ lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+ ;;
-+
- netbsd*)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+++ /dev/null
-#!/bin/sh -e
-## 001_ld_makefile_patch.dpatch
-##
-## All lines beginning with `## DP:' are a description of the patch.
-## DP: Description: correct where ld scripts are installed
-## DP: Author: Chris Chimelis <chris@debian.org>
-## DP: Upstream status: N/A
-## DP: Date: ??
-
-if [ $# -ne 1 ]; then
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1
-fi
-
-[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
-
-case "$1" in
- -patch) patch $patch_opts -p1 < $0;;
- -unpatch) patch $patch_opts -p1 -R < $0;;
- *)
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1;;
-esac
-
-exit 0
-
-@DPATCH@
---- binutils-2.16.91.0.1/ld/Makefile.am
-+++ binutils-2.16.91.0.1/ld/Makefile.am
-@@ -20,7 +20,7 @@
- # We put the scripts in the directory $(scriptdir)/ldscripts.
- # We can't put the scripts in $(datadir) because the SEARCH_DIR
- # directives need to be different for native and cross linkers.
--scriptdir = $(tooldir)/lib
-+scriptdir = $(libdir)
-
- EMUL = @EMUL@
- EMULATION_OFILES = @EMULATION_OFILES@
---- binutils-2.16.91.0.1/ld/Makefile.in
-+++ binutils-2.16.91.0.1/ld/Makefile.in
-@@ -268,7 +268,7 @@
- # We put the scripts in the directory $(scriptdir)/ldscripts.
- # We can't put the scripts in $(datadir) because the SEARCH_DIR
- # directives need to be different for native and cross linkers.
--scriptdir = $(tooldir)/lib
-+scriptdir = $(libdir)
- BASEDIR = $(srcdir)/..
- BFDDIR = $(BASEDIR)/bfd
- INCDIR = $(BASEDIR)/include
+++ /dev/null
-#!/bin/sh -e
-## 006_better_file_error.dpatch by David Kimdon <dwhedon@gordian.com>
-##
-## All lines beginning with `## DP:' are a description of the patch.
-## DP: Specify which filename is causing an error if the filename is a
-## DP: directory. (#45832)
-
-if [ $# -ne 1 ]; then
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1
-fi
-
-[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
-
-case "$1" in
- -patch) patch $patch_opts -p1 < $0;;
- -unpatch) patch $patch_opts -p1 -R < $0;;
- *)
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1;;
-esac
-
-exit 0
-
-@DPATCH@
-diff -urNad /home/james/debian/packages/binutils/binutils-2.14.90.0.6/bfd/opncls.c binutils-2.14.90.0.6/bfd/opncls.c
---- /home/james/debian/packages/binutils/binutils-2.14.90.0.6/bfd/opncls.c 2003-07-23 16:08:09.000000000 +0100
-+++ binutils-2.14.90.0.6/bfd/opncls.c 2003-09-10 22:35:00.000000000 +0100
-@@ -150,6 +150,13 @@
- {
- bfd *nbfd;
- const bfd_target *target_vec;
-+ struct stat s;
-+
-+ if (stat (filename, &s) == 0)
-+ if (S_ISDIR(s.st_mode)) {
-+ bfd_set_error (bfd_error_file_not_recognized);
-+ return NULL;
-+ }
-
- nbfd = _bfd_new_bfd ();
- if (nbfd == NULL)
+++ /dev/null
-#!/bin/sh -e
-## 012_check_ldrunpath_length.dpatch by Chris Chimelis <chris@debian.org>
-##
-## All lines beginning with `## DP:' are a description of the patch.
-## DP: Only generate an RPATH entry if LD_RUN_PATH is not empty, for
-## DP: cases where -rpath isn't specified. (#151024)
-
-if [ $# -ne 1 ]; then
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1
-fi
-
-[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
-
-case "$1" in
- -patch) patch $patch_opts -p1 < $0;;
- -unpatch) patch $patch_opts -p1 -R < $0;;
- *)
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1;;
-esac
-
-exit 0
-
-@DPATCH@
-diff -urNad /home/james/debian/packages/binutils/new/binutils-2.15/ld/emultempl/elf32.em binutils-2.15/ld/emultempl/elf32.em
---- /home/james/debian/packages/binutils/new/binutils-2.15/ld/emultempl/elf32.em 2004-05-21 23:12:58.000000000 +0100
-+++ binutils-2.15/ld/emultempl/elf32.em 2004-05-21 23:12:59.000000000 +0100
-@@ -692,6 +692,8 @@
- && command_line.rpath == NULL)
- {
- lib_path = (const char *) getenv ("LD_RUN_PATH");
-+ if ((lib_path) && (strlen (lib_path) == 0))
-+ lib_path = NULL;
- if (gld${EMULATION_NAME}_search_needed (lib_path, &n,
- force))
- break;
-@@ -871,6 +873,8 @@
- rpath = command_line.rpath;
- if (rpath == NULL)
- rpath = (const char *) getenv ("LD_RUN_PATH");
-+ if ((rpath) && (strlen (rpath) == 0))
-+ rpath = NULL;
- if (! (bfd_elf_size_dynamic_sections
- (output_bfd, command_line.soname, rpath,
- command_line.filter_shlib,
+++ /dev/null
---- /tmp/configure.ac 2008-06-22 14:14:59.000000000 +0200
-+++ binutils-2.18.50.0.7/configure.ac 2008-06-22 14:15:30.000000000 +0200
-@@ -561,7 +561,7 @@
- noconfigdirs="$noconfigdirs target-libffi target-qthreads"
- libgloss_dir=arm
- ;;
-- arm*-*-linux-gnueabi)
-+ arm*-*-linux-gnueabi | arm*-*-linux-uclibcgnueabi)
- noconfigdirs="$noconfigdirs target-qthreads"
- noconfigdirs="$noconfigdirs target-libobjc"
- case ${with_newlib} in
---- /tmp/configure 2008-06-22 14:17:11.000000000 +0200
-+++ binutils-2.18.50.0.7/configure 2008-06-22 14:17:56.000000000 +0200
-@@ -2307,7 +2307,7 @@
- noconfigdirs="$noconfigdirs target-libffi target-qthreads"
- libgloss_dir=arm
- ;;
-- arm*-*-linux-gnueabi)
-+ arm*-*-linux-gnueabi | arm*-*-linux-uclibcgnueabi)
- noconfigdirs="$noconfigdirs target-qthreads"
- noconfigdirs="$noconfigdirs target-libobjc"
- case ${with_newlib} in
+++ /dev/null
-Adds support for Freescale Power architecture e300c2 and e300c3 cores.
-http://www.bitshrine.org/gpp/tc-fsl-x86lnx-e300c3-nptl-4.0.2-2.src.rpm
-
-Leon Woestenberg <leonw@mailcan.com>
-
-diff -uNr binutils-2.16.1.orig/gas/config/tc-ppc.c binutils-2.16.1/gas/config/tc-ppc.c
---- binutils-2.16.1.orig/gas/config/tc-ppc.c 2005-03-02 13:24:01.000000000 +0000
-+++ binutils-2.16.1/gas/config/tc-ppc.c 2006-07-04 11:45:24.000000000 +0100
-@@ -879,6 +879,10 @@
- else
- ppc_cpu |= PPC_OPCODE_SPE;
- }
-+ else if (strcmp (arg, "pmr") == 0)
-+ {
-+ ppc_cpu |= PPC_OPCODE_PMR;
-+ }
- /* -mppc64 and -m620 mean to assemble for the 64-bit PowerPC
- 620. */
- else if (strcmp (arg, "ppc64") == 0 || strcmp (arg, "620") == 0)
+++ /dev/null
-# strip (and objcopy) fail to set the error code if there is no
-# output file name and the rename of the stripped (or copied) file
-# fails, yet the command fails to do anything. This fixes both
-# objcopy and strip.
-#
-# modification by bero: Ported to 2.16.91.0.6
-#
-#Signed-off-by: John Bowler <jbowler@acm.org>
-#Signed-off-by: Bernhard Rosenkraenzer <bero@arklinux.org>
----
-# binutils/objcopy.c | 8 +++++---
-# 1 file changed, 5 insertions(+), 3 deletions(-)
-#
-Index: src/binutils/objcopy.c
-===================================================================
---- src.orig/binutils/objcopy.c 2007-08-09 13:26:03.000000000 +0100
-+++ src/binutils/objcopy.c 2007-08-09 16:36:12.000000000 +0100
-@@ -2787,8 +2787,9 @@ strip_main (int argc, char *argv[])
- if (preserve_dates)
- set_times (tmpname, &statbuf);
- if (output_file != tmpname)
-- smart_rename (tmpname, output_file ? output_file : argv[i],
-- preserve_dates);
-+ if (smart_rename (tmpname, output_file ? output_file : argv[i],
-+ preserve_dates))
-+ hold_status = 1;
- status = hold_status;
- }
- else
-@@ -3411,7 +3412,8 @@ copy_main (int argc, char *argv[])
- if (preserve_dates)
- set_times (tmpname, &statbuf);
- if (tmpname != output_filename)
-- smart_rename (tmpname, input_filename, preserve_dates);
-+ if (smart_rename (tmpname, input_filename, preserve_dates))
-+ status = 1;
- }
- else
- unlink_if_ordinary (tmpname);
+++ /dev/null
---- binutils-2.18.orig/configure
-+++ binutils-2.18/configure
-@@ -2206,7 +2206,7 @@
- am33_2.0-*-linux*)
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
- ;;
-- sh-*-linux*)
-+ sh*-*-linux*)
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
- ;;
- sh*-*-pe|mips*-*-pe|*arm-wince-pe)
-@@ -2504,7 +2504,7 @@
- romp-*-*)
- noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
- ;;
-- sh-*-* | sh64-*-*)
-+ sh*-*-* | sh64-*-*)
- case "${host}" in
- i[3456789]86-*-vsta) ;; # don't add gprof back in
- i[3456789]86-*-go32*) ;; # don't add gprof back in
---- binutils-2.18.orig/gprof/configure
-+++ binutils-2.18/gprof/configure
-@@ -4124,6 +4124,11 @@
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-+linux-uclibc*)
-+ lt_cv_deplibs_check_method=pass_all
-+ lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+ ;;
-+
- netbsd*)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+++ /dev/null
-#!/bin/sh -e
-## 001_ld_makefile_patch.dpatch
-##
-## All lines beginning with `## DP:' are a description of the patch.
-## DP: Description: correct where ld scripts are installed
-## DP: Author: Chris Chimelis <chris@debian.org>
-## DP: Upstream status: N/A
-## DP: Date: ??
-
-if [ $# -ne 1 ]; then
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1
-fi
-
-[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
-
-case "$1" in
- -patch) patch $patch_opts -p1 < $0;;
- -unpatch) patch $patch_opts -p1 -R < $0;;
- *)
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1;;
-esac
-
-exit 0
-
-@DPATCH@
---- binutils-2.16.91.0.1/ld/Makefile.am
-+++ binutils-2.16.91.0.1/ld/Makefile.am
-@@ -20,7 +20,7 @@
- # We put the scripts in the directory $(scriptdir)/ldscripts.
- # We can't put the scripts in $(datadir) because the SEARCH_DIR
- # directives need to be different for native and cross linkers.
--scriptdir = $(tooldir)/lib
-+scriptdir = $(libdir)
-
- EMUL = @EMUL@
- EMULATION_OFILES = @EMULATION_OFILES@
---- binutils-2.16.91.0.1/ld/Makefile.in
-+++ binutils-2.16.91.0.1/ld/Makefile.in
-@@ -268,7 +268,7 @@
- # We put the scripts in the directory $(scriptdir)/ldscripts.
- # We can't put the scripts in $(datadir) because the SEARCH_DIR
- # directives need to be different for native and cross linkers.
--scriptdir = $(tooldir)/lib
-+scriptdir = $(libdir)
- BASEDIR = $(srcdir)/..
- BFDDIR = $(BASEDIR)/bfd
- INCDIR = $(BASEDIR)/include
+++ /dev/null
-#!/bin/sh -e
-## 006_better_file_error.dpatch by David Kimdon <dwhedon@gordian.com>
-##
-## All lines beginning with `## DP:' are a description of the patch.
-## DP: Specify which filename is causing an error if the filename is a
-## DP: directory. (#45832)
-
-if [ $# -ne 1 ]; then
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1
-fi
-
-[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
-
-case "$1" in
- -patch) patch $patch_opts -p1 < $0;;
- -unpatch) patch $patch_opts -p1 -R < $0;;
- *)
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1;;
-esac
-
-exit 0
-
-@DPATCH@
-diff -urNad /home/james/debian/packages/binutils/binutils-2.14.90.0.6/bfd/opncls.c binutils-2.14.90.0.6/bfd/opncls.c
---- /home/james/debian/packages/binutils/binutils-2.14.90.0.6/bfd/opncls.c 2003-07-23 16:08:09.000000000 +0100
-+++ binutils-2.14.90.0.6/bfd/opncls.c 2003-09-10 22:35:00.000000000 +0100
-@@ -150,6 +150,13 @@
- {
- bfd *nbfd;
- const bfd_target *target_vec;
-+ struct stat s;
-+
-+ if (stat (filename, &s) == 0)
-+ if (S_ISDIR(s.st_mode)) {
-+ bfd_set_error (bfd_error_file_not_recognized);
-+ return NULL;
-+ }
-
- nbfd = _bfd_new_bfd ();
- if (nbfd == NULL)
+++ /dev/null
-#!/bin/sh -e
-## 012_check_ldrunpath_length.dpatch by Chris Chimelis <chris@debian.org>
-##
-## All lines beginning with `## DP:' are a description of the patch.
-## DP: Only generate an RPATH entry if LD_RUN_PATH is not empty, for
-## DP: cases where -rpath isn't specified. (#151024)
-
-if [ $# -ne 1 ]; then
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1
-fi
-
-[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
-
-case "$1" in
- -patch) patch $patch_opts -p1 < $0;;
- -unpatch) patch $patch_opts -p1 -R < $0;;
- *)
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1;;
-esac
-
-exit 0
-
-@DPATCH@
-diff -urNad /home/james/debian/packages/binutils/new/binutils-2.15/ld/emultempl/elf32.em binutils-2.15/ld/emultempl/elf32.em
---- /home/james/debian/packages/binutils/new/binutils-2.15/ld/emultempl/elf32.em 2004-05-21 23:12:58.000000000 +0100
-+++ binutils-2.15/ld/emultempl/elf32.em 2004-05-21 23:12:59.000000000 +0100
-@@ -692,6 +692,8 @@
- && command_line.rpath == NULL)
- {
- lib_path = (const char *) getenv ("LD_RUN_PATH");
-+ if ((lib_path) && (strlen (lib_path) == 0))
-+ lib_path = NULL;
- if (gld${EMULATION_NAME}_search_needed (lib_path, &n,
- force))
- break;
-@@ -871,6 +873,8 @@
- rpath = command_line.rpath;
- if (rpath == NULL)
- rpath = (const char *) getenv ("LD_RUN_PATH");
-+ if ((rpath) && (strlen (rpath) == 0))
-+ rpath = NULL;
- if (! (bfd_elf_size_dynamic_sections
- (output_bfd, command_line.soname, rpath,
- command_line.filter_shlib,
+++ /dev/null
-Source: Khem Raj <raj.khem@gmail.com>
-Disposition: submit upstream.
-
-Description:
-
-We do not need to have the libtool patch anymore for binutils after
-libtool has been updated upstream it include support for it. However
-for building gas natively on uclibc systems we have to link it with
--lm so that it picks up missing symbols.
-
-/local/build_area/BUILD/arm_v5t_le_uclibc/binutils-2.17.50/objdir/libiberty/pic/libiberty.a(floatformat.o): In function `floatformat_from_double':
-floatformat.c:(.text+0x1ec): undefined reference to `frexp'
-floatformat.c:(.text+0x2f8): undefined reference to `ldexp'
-/local/build_area/BUILD/arm_v5t_le_uclibc/binutils-2.17.50/objdir/libiberty/pic/libiberty.a(floatformat.o): In function `floatformat_to_double':
-floatformat.c:(.text+0x38a): undefined reference to `ldexp'
-floatformat.c:(.text+0x3d2): undefined reference to `ldexp'
-floatformat.c:(.text+0x43e): undefined reference to `ldexp' floatformat.c:(.text+0x4e2): undefined reference to `ldexp'
-collect2: ld returned 1 exit status
-make[4]: *** [as-new] Error 1
-
-Index: binutils-2.17.50/gas/configure.tgt
-===================================================================
---- binutils-2.17.50.orig/gas/configure.tgt
-+++ binutils-2.17.50/gas/configure.tgt
-@@ -408,6 +408,12 @@ case ${generic_target} in
- *-*-netware) fmt=elf em=netware ;;
- esac
-
-+case ${generic_target} in
-+ arm-*-*uclibc*)
-+ need_libm=yes
-+ ;;
-+esac
-+
- case ${cpu_type} in
- alpha | arm | i386 | ia64 | mips | ns32k | pdp11 | ppc | sparc | z80 | z8k)
- bfd_gas=yes
-
+++ /dev/null
-A command like /bin/sh ../../i586-poky-linux-libtool --mode=install /usr/bin/install -c gck-roots-store-standalone.la '/media/data1/builds/poky1/tmp/work/core2-poky-linux/gnome-keyring-2.26.1-r1/image/usr/lib/gnome-keyring/standalone/' fails (e.g. gnome-keyring or pulseaudio)
-
-This is because libdir has a trailing slash which breaks the comparision.
-
-RP 2/1/10
-
-Index: binutils-2.19/ltmain.sh
-===================================================================
---- binutils-2.19.orig/ltmain.sh 2007-05-25 20:56:24.000000000 +0100
-+++ binutils-2.19/ltmain.sh 2010-02-10 22:49:07.191629027 +0000
-@@ -2320,8 +2320,12 @@
- dir="$dir$objdir"
-
- if test -n "$relink_command"; then
-+ # Strip any trailing slash from the destination.
-+ func_stripname '' '/' "$libdir"
-+ destlibdir=$func_stripname_result
-+
- # Determine the prefix the user has applied to our future dir.
-- inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
-+ inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$destlibdir\$%%"`
-
- # Don't allow the user to place us outside of our expected
- # location b/c this prevents finding dependent libraries that
-@@ -3958,8 +3962,14 @@
- absdir="$abs_ladir"
- libdir="$abs_ladir"
- else
-- dir="$libdir"
-- absdir="$libdir"
-+ # Adding 'libdir' from the .la file to our library search paths
-+ # breaks crosscompilation horribly. We cheat here and don't add
-+ # it, instead adding the path where we found the .la. -CL
-+ dir="$abs_ladir"
-+ absdir="$abs_ladir"
-+ libdir="$abs_ladir"
-+ #dir="$libdir"
-+ #absdir="$libdir"
- fi
- test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
- else
-@@ -4329,8 +4339,6 @@
- add="$libdir/$linklib"
- fi
- else
-- # We cannot seem to hardcode it, guess we'll fake it.
-- add_dir="-L$libdir"
- # Try looking first in the location we're being installed to.
- if test -n "$inst_prefix_dir"; then
- case $libdir in
-@@ -4478,7 +4486,17 @@
- fi
- ;;
- *)
-- path="-L$absdir/$objdir"
-+ # OE sets installed=no in staging. We need to look in $objdir and $absdir,
-+ # preferring $objdir. RP 31/04/2008
-+ if test -f "$absdir/$objdir/$depdepl" ; then
-+ depdepl="$absdir/$objdir/$depdepl"
-+ path="-L$absdir/$objdir"
-+ elif test -f "$absdir/$depdepl" ; then
-+ depdepl="$absdir/$depdepl"
-+ path="-L$absdir"
-+ else
-+ path="-L$absdir/$objdir"
-+ fi
- ;;
- esac
- else
+++ /dev/null
-require binutils_${PV}.bb
-require binutils-cross-canadian.inc
-PR = "r4"
+++ /dev/null
-require binutils_${PV}.bb
-require binutils-cross-canadian.inc
-PR = "r0"
+++ /dev/null
-require binutils_${PV}.bb
-require binutils-cross.inc
-PR = "r2"
+++ /dev/null
-require binutils_${PV}.bb
-require binutils-cross.inc
-
+++ /dev/null
-require binutils-cross_${PV}.bb
-
-inherit crosssdk
-
-PROVIDES = "virtual/${TARGET_PREFIX}binutils-crosssdk"
-
-PR = "r1"
-
-do_configure_prepend () {
- sed -i 's#/usr/local/lib /lib /usr/lib#${SDKPATH}/lib /usr/local/lib /lib /usr/lib#' ${S}/ld/configure.tgt
-}
-
+++ /dev/null
-require binutils.inc
-
-PR = "r1"
-
-SRC_URI = "\
- ${GNU_MIRROR}/binutils/binutils-${PV}.tar.bz2 \
- file://binutils-2.16.91.0.6-objcopy-rename-errorcode.patch;patch=1 \
- file://binutils-configure-texinfo-version.patch;patch=1 \
- file://binutils-uclibc-100-uclibc-conf.patch;patch=1 \
- file://110-arm-eabi-conf.patch;patch=1 \
- file://binutils-uclibc-300-001_ld_makefile_patch.patch;patch=1 \
- file://binutils-uclibc-300-006_better_file_error.patch;patch=1 \
- file://binutils-uclibc-300-012_check_ldrunpath_length.patch;patch=1 \
- "
+++ /dev/null
-PR = "r1"
-
-require binutils.inc
-
-SRC_URI = "\
- ${GNU_MIRROR}/binutils/binutils-${PV}.tar.bz2 \
- file://binutils-2.16.91.0.6-objcopy-rename-errorcode.patch;patch=1 \
- file://binutils-uclibc-100-uclibc-conf.patch;patch=1 \
- file://110-arm-eabi-conf.patch;patch=1 \
- file://binutils-uclibc-300-001_ld_makefile_patch.patch;patch=1 \
- file://binutils-uclibc-300-006_better_file_error.patch;patch=1 \
- file://binutils-uclibc-300-012_check_ldrunpath_length.patch;patch=1 \
- file://binutils-uclibc-gas-needs-libm.patch;patch=1 \
- file://libtool.patch;patch=1 \
- "
-
-# powerpc patches
-SRC_URI += "file://binutils-2.16.1-e300c2c3.patch;patch=1"
-
