LICENSE = "LGPL"
SECTION = "x11"
-DEPENDS = "glib-2.0 gtk+ libglade eds-dbus gnome-vfs"
-RDEPENDS = "gnome-vfs-plugin-file"
-RRECOMMENDS = "gnome-vfs-plugin-http"
+DEPENDS = "glib-2.0 gtk+ libglade eds-dbus"
+# gnome-vfs
+#RDEPENDS = "gnome-vfs-plugin-file"
+#RRECOMMENDS = "gnome-vfs-plugin-http"
MAINTAINER = "Chris Lord <chris@openedhand.com>"
DESCRIPTION = "Contacts is an address-book application."
PR = "r1"
S = "${WORKDIR}/trunk"
-EXTRA_OECONF = "--enable-gnome-vfs"
+#EXTRA_OECONF = "--enable-gnome-vfs"
do_install_append () {
install -d ${D}/${datadir}/icons/hicolor/48x48/stock/net
gtk-clearlooks-engine \
eds-dbus \
contacts \
- osso-addressbook \
oprofile \
dates \
leafpad \
--- /dev/null
+dnl AX_KERNEL_OPTION(option, action-if-found, action-if-not-found)
+dnl see if autoconf.h defines the option
+AC_DEFUN([AX_KERNEL_OPTION], [
+SAVE_CFLAGS=$CFLAGS
+CFLAGS="-I$KINC -O2 -D__KERNEL__"
+AC_TRY_COMPILE( [#include <linux/config.h>],
+[
+#ifndef $1
+break_me_hard(\\\);
+#endif
+],[$2],[$3],)
+CFLAGS=$SAVE_CFLAGS
+])
+
+dnl Handle the 2.4 module inside module/
+AC_DEFUN([AX_CONFIG_MODULE],
+[
+if test ! -f $KINC/linux/autoconf.h; then
+ AC_MSG_ERROR([no suitably configured kernel include tree found])
+fi
+
+dnl --- Get Linux kernel version and compile parameters ---
+
+AC_SUBST(KVERS)
+AC_MSG_CHECKING([for kernel version])
+dnl it's like this to handle mandrake's fubar version.h - bug #471448
+eval KVERS=`gcc -I$KINC -E -dM $KINC/linux/version.h | grep -w UTS_RELEASE | awk '{print $[]3}'`
+AC_MSG_RESULT([$KVERS])
+case "$KVERS" in
+2.2.*|2.4.*) ;;
+*) AC_MSG_ERROR([Unsupported kernel version])
+esac
+
+dnl Check for the minimal kernel version supported
+AC_MSG_CHECKING([kernel version])
+AX_KERNEL_VERSION(2, 2, 10, <=, AC_MSG_RESULT([ok]), AC_MSG_ERROR([check html documentation install section]))
+
+dnl linux/spinlock.h added at some point in past
+AC_MSG_CHECKING([for $KINC/linux/spinlock.h])
+if test -f $KINC/linux/spinlock.h; then
+ EXTRA_CFLAGS_MODULE="$EXTRA_CFLAGS_MODULE -DHAVE_LINUX_SPINLOCK_HEADER"
+ AC_MSG_RESULT([yes])
+else
+ AC_MSG_RESULT([no])
+fi
+
+AC_MSG_CHECKING([for rtc_lock])
+gcc -I$KINC -E $KINC/linux/mc146818rtc.h | grep rtc_lock >/dev/null
+if test "$?" -eq 0; then
+ EXTRA_CFLAGS_MODULE="$EXTRA_CFLAGS_MODULE -DRTC_LOCK"
+ AC_MSG_RESULT([yes])
+else
+ AC_MSG_RESULT([no])
+fi
+
+arch="unknown"
+AC_MSG_CHECKING(for x86-64 architecture)
+AX_KERNEL_OPTION(CONFIG_X86_64, x8664=1, x8664=0)
+AX_MSG_RESULT_YN($x8664)
+BUILD_HAMMER=no
+if test "$x8664" -eq 1; then
+ arch="x86"
+ BUILD_HAMMER=yes
+else
+ AC_MSG_CHECKING(for x86 architecture)
+ AX_KERNEL_OPTION(CONFIG_X86, x86=1, x86=0)
+ AX_KERNEL_OPTION(CONFIG_X86_WP_WORKS_OK, x86=1, x86=$x86)
+ AX_MSG_RESULT_YN($x86)
+ test "$x86" = 1 && arch="x86"
+
+ if test "$arch" = "unknown"; then
+ AC_MSG_CHECKING(for ia64 architecture)
+ AX_KERNEL_OPTION(CONFIG_IA64, ia64=1, ia64=0)
+ AX_MSG_RESULT_YN($ia64)
+ test "$ia64" = 1 && arch="ia64"
+ fi
+
+fi
+AC_SUBST(BUILD_HAMMER)
+
+test "$arch" = "unknown" && AC_MSG_ERROR(Unsupported architecture)
+
+dnl check to see if kernel verion appropriate for arch
+AC_MSG_CHECKING(arch/kernel version combination)
+case "$arch" in
+ia64)
+ AX_KERNEL_VERSION(2, 4, 18, <, AC_MSG_RESULT([ok]),
+ AC_MSG_ERROR([unsupported arch/kernel])) ;;
+*) AC_MSG_RESULT([ok])
+esac
+
+dnl for now we do not support PREEMPT patch
+AC_MSG_CHECKING([for preempt patch])
+AX_KERNEL_OPTION(CONFIG_PREEMPT,preempt=1,preempt=0)
+AX_MSG_RESULT_YN([$preempt])
+test "$preempt" = 0 || AC_MSG_ERROR([unsupported kernel configuration : CONFIG_PREEMPT])
+
+AC_SUBST(KINC)
+
+MODINSTALLDIR=/lib/modules/$KVERS
+
+OPROFILE_MODULE_ARCH=$arch
+AC_SUBST(OPROFILE_MODULE_ARCH)
+]
+)
+
+dnl AX_KERNEL_VERSION(major, minor, level, comparison, action-if-true, action-if-false)
+AC_DEFUN([AX_KERNEL_VERSION], [
+SAVE_CFLAGS=$CFLAGS
+CFLAGS="-I$KINC -D__KERNEL__ -Werror"
+AC_TRY_COMPILE(
+ [
+ #include <linux/version.h>
+ #include <linux/config.h>
+ ],
+ [
+ #if LINUX_VERSION_CODE $4 KERNEL_VERSION($1, $2, $3)
+ break_me_hard(\\\);
+ #endif
+ ],
+[$5],[$6],)
+CFLAGS=$SAVE_CFLAGS
+])
+
+
+dnl AX_MSG_RESULT_YN(a)
+dnl results "yes" iff a==1, "no" else
+AC_DEFUN([AX_MSG_RESULT_YN], [x=no
+test "x$1" = "x1" && x=yes
+AC_MSG_RESULT($x)])
+
+dnl AX_MALLOC_ATTRIBUTE - see if gcc will take __attribute__((malloc))
+AC_DEFUN([AX_MALLOC_ATTRIBUTE],
+[
+AC_MSG_CHECKING([whether malloc attribute is understood])
+SAVE_CFLAGS=$CFLAGS
+CFLAGS="-Werror $CFLAGS"
+AC_TRY_COMPILE(,[
+void monkey() __attribute__((malloc));
+],AC_MSG_RESULT([yes]); AC_DEFINE(MALLOC_ATTRIBUTE_OK, 1, [whether malloc attribute is understood]), AC_MSG_RESULT([no]))
+CFLAGS=$SAVE_CFLAGS
+]
+)
+
+dnl builtin_expect is used in module we can't add that in config.h
+AC_DEFUN([AX_BUILTIN_EXPECT],
+[
+AC_MSG_CHECKING([whether __builtin_expect is understood])
+SAVE_CFLAGS=$CFLAGS
+CFLAGS="-Werror $CFLAGS"
+AC_TRY_LINK(,[
+int i;
+if (__builtin_expect(i, 0)) { }
+],
+AC_MSG_RESULT([yes]); EXTRA_CFLAGS_MODULE="$EXTRA_CFLAGS_MODULE -DEXPECT_OK",
+AC_MSG_RESULT([no]);)
+CFLAGS=$SAVE_CFLAGS
+]
+)
+
+dnl AX_EXTRA_DIRS - Let user specify extra dirs for include/libs
+AC_DEFUN([AX_EXTRA_DIRS],
+[
+AC_ARG_WITH(extra-includes,
+[ --with-extra-includes=DIR add extra include paths],
+ use_extra_includes="$withval",
+ use_extra_includes=NO
+)
+if test -n "$use_extra_includes" && \
+ test "$use_extra_includes" != "NO"; then
+ ac_save_ifs=$IFS
+ IFS=':'
+ for dir in $use_extra_includes; do
+ extra_includes="$extra_includes -I$dir"
+ done
+ IFS=$ac_save_ifs
+ CPPFLAGS="$CPPFLAGS $extra_includes"
+fi
+
+AC_ARG_WITH(extra-libs,
+[ --with-extra-libs=DIR add extra library paths],
+ use_extra_libs=$withval,
+ use_extra_libs=NO
+)
+if test -n "$use_extra_libs" && \
+ test "$use_extra_libs" != "NO"; then
+ ac_save_ifs=$IFS
+ IFS=':'
+ for dir in $use_extra_libs; do
+ extra_libraries="$extra_libraries -L$dir"
+ done
+ IFS=$ac_save_ifs
+ LDFLAGS="$LDFLAGS $extra_libraries"
+fi
+]
+)
+
+dnl AX_POPT_CONST - check popt prototype
+AC_DEFUN([AX_POPT_CONST],
+[
+AC_MSG_CHECKING([popt prototype])
+SAVE_CXXFLAGS=$CXXFLAGS
+CXXFLAGS="-Werror $CXXFLAGS"
+AC_TRY_COMPILE([#include <popt.h>],
+[
+int c; char **v;
+poptGetContext(0, c, v, 0, 0);
+],
+AC_MSG_RESULT([takes char **]);,
+AC_MSG_RESULT([takes const char **]); AC_DEFINE(CONST_POPT, 1, [whether popt prototype takes a const char **]))
+CXXFLAGS="$SAVE_CXXFLAGS"
+]
+)
+
+dnl AX_CHECK_SSTREAM - check if local sstream is needed to compile OK
+AC_DEFUN([AX_CHECK_SSTREAM],
+[
+AC_MSG_CHECKING([whether to use included sstream])
+AC_TRY_COMPILE([#include <sstream>], [],
+AC_MSG_RESULT([no]);,
+AC_MSG_RESULT([yes]); OP_CXXFLAGS="$OP_CXXFLAGS -I\${top_srcdir}/include")
+]
+)
+
+dnl AX_CHECK_TYPEDEF(typedef_name, type, action-if-true, action-if-false)
+dnl exec action-if-true if typedef_name is a typedef to type else exec
+dnl action-if-false
+dnl currently work only with type typedef'ed in stddef.h
+AC_DEFUN([AX_CHECK_TYPEDEF], [
+dnl AC_LANG_PUSH(C) not in autoconf 2.13
+AC_LANG_SAVE
+AC_LANG_C
+SAVE_CFLAGS=$CFLAGS
+CFLAGS="-Werror $CFLAGS"
+
+AC_TRY_COMPILE(
+ [
+ #include <stddef.h>
+ ],
+ [
+ typedef void (*fct1)($1);
+ typedef void (*fct2)($2);
+ fct1 f1 = 0;
+ fct2 f2 = 0;
+ if (f1 == f2) {}
+ ],
+[$3],[$4])
+
+CFLAGS=$SAVE_CFLAGS
+AC_LANG_RESTORE
+])
+
+
+dnl AX_TYPEDEFED_NAME(typedef_name, candidate_list, var_name)
+dnl set var_name to the typedef name of $1 which must be in canditate_list
+dnl else produce a fatal error
+AC_DEFUN([AX_TYPEDEFED_NAME], [
+ AC_MSG_CHECKING([type of $1])
+ for f in $2; do
+ AX_CHECK_TYPEDEF($1, $f, $3="$f", $3="")
+ if test -n "${$3}"; then
+ break
+ fi
+ done
+ if test -n "${$3}"; then
+ AC_MSG_RESULT([${$3}])
+ else
+ AC_MSG_ERROR([not found])
+ fi
+])
+
+dnl find a binary in the path
+AC_DEFUN([QT_FIND_PATH],
+[
+ AC_MSG_CHECKING([for $1])
+ AC_CACHE_VAL(qt_cv_path_$1,
+ [
+ qt_cv_path_$1="NONE"
+ if test -n "$$2"; then
+ qt_cv_path_$1="$$2";
+ else
+ dirs="$3"
+ qt_save_IFS=$IFS
+ IFS=':'
+ for dir in $PATH; do
+ dirs="$dirs $dir"
+ done
+ IFS=$qt_save_IFS
+
+ for dir in $dirs; do
+ if test -x "$dir/$1"; then
+ if test -n "$5"; then
+ evalstr="$dir/$1 $5 2>&1 "
+ if eval $evalstr; then
+ qt_cv_path_$1="$dir/$1"
+ break
+ fi
+ else
+ qt_cv_path_$1="$dir/$1"
+ break
+ fi
+ fi
+ done
+ fi
+ ])
+
+ if test -z "$qt_cv_path_$1" || test "$qt_cv_path_$1" = "NONE"; then
+ AC_MSG_RESULT(not found)
+ $4
+ else
+ AC_MSG_RESULT($qt_cv_path_$1)
+ $2=$qt_cv_path_$1
+ fi
+])
+
+dnl Find the uic compiler on the path or in qt_cv_dir
+AC_DEFUN([QT_FIND_UIC],
+[
+ QT_FIND_PATH(uic, ac_uic, $qt_cv_dir/bin)
+ if test -z "$ac_uic" -a "$FATAL" = 1; then
+ AC_MSG_ERROR([uic binary not found in \$PATH or $qt_cv_dir/bin !])
+ fi
+])
+
+dnl Find the right moc in path/qt_cv_dir
+AC_DEFUN([QT_FIND_MOC],
+[
+ QT_FIND_PATH(moc2, ac_moc2, $qt_cv_dir/bin)
+ QT_FIND_PATH(moc, ac_moc1, $qt_cv_dir/bin)
+
+ if test -n "$ac_moc1" -a -n "$ac_moc2"; then
+ dnl found both. Prefer Qt3's if it exists else moc2
+ $ac_moc1 -v 2>&1 | grep "Qt 3" >/dev/null
+ if test "$?" = 0; then
+ ac_moc=$ac_moc1;
+ else
+ ac_moc=$ac_moc2;
+ fi
+ else
+ if test -n "$ac_moc1"; then
+ ac_moc=$ac_moc1;
+ else
+ ac_moc=$ac_moc2;
+ fi
+ fi
+
+ if test -z "$ac_moc" -a "$FATAL" = 1; then
+ AC_MSG_ERROR([moc binary not found in \$PATH or $qt_cv_dir/bin !])
+ fi
+])
+
+dnl check a particular libname
+AC_DEFUN([QT_TRY_LINK],
+[
+ SAVE_LIBS="$LIBS"
+ LIBS="$LIBS $1"
+ AC_TRY_LINK([
+ #include <qglobal.h>
+ #include <qstring.h>
+ ],
+ [
+ QString s("mangle_failure");
+ #if (QT_VERSION < 221)
+ break_me_(\\\);
+ #endif
+ ],
+ qt_cv_libname=$1,
+ )
+ LIBS="$SAVE_LIBS"
+])
+
+dnl check we can do a compile
+AC_DEFUN([QT_CHECK_COMPILE],
+[
+ AC_MSG_CHECKING([for Qt library name])
+
+ AC_CACHE_VAL(qt_cv_libname,
+ [
+ AC_LANG_CPLUSPLUS
+ SAVE_CXXFLAGS=$CXXFLAGS
+ CXXFLAGS="$CXXFLAGS $QT_INCLUDES $QT_LDFLAGS"
+
+ for libname in -lqt-mt -lqt3 -lqt2 -lqt;
+ do
+ QT_TRY_LINK($libname)
+ if test -n "$qt_cv_libname"; then
+ break;
+ fi
+ done
+
+ CXXFLAGS=$SAVE_CXXFLAGS
+ ])
+
+ if test -z "$qt_cv_libname"; then
+ AC_MSG_RESULT([failed])
+ if test "$FATAL" = 1 ; then
+ AC_MSG_ERROR([Cannot compile a simple Qt executable. Check you have the right \$QTDIR !])
+ fi
+ else
+ AC_MSG_RESULT([$qt_cv_libname])
+ fi
+])
+
+dnl get Qt version we're using
+AC_DEFUN([QT_GET_VERSION],
+[
+ AC_CACHE_CHECK([Qt version],lyx_cv_qtversion,
+ [
+ AC_LANG_CPLUSPLUS
+ SAVE_CPPFLAGS=$CPPFLAGS
+ CPPFLAGS="$CPPFLAGS $QT_INCLUDES"
+
+ cat > conftest.$ac_ext <<EOF
+#line __oline__ "configure"
+#include "confdefs.h"
+#include <qglobal.h>
+"%%%"QT_VERSION_STR"%%%"
+EOF
+ lyx_cv_qtversion=`(eval "$ac_cpp conftest.$ac_ext") 2>&5 | \
+ grep '^"%%%"' 2>/dev/null | \
+ sed -e 's/"%%%"//g' -e 's/"//g'`
+ rm -f conftest.$ac_ext
+ CPPFLAGS=$SAVE_CPPFLAGS
+ ])
+
+ QT_VERSION=$lyx_cv_qtversion
+ AC_SUBST(QT_VERSION)
+])
+
+dnl start here
+AC_DEFUN([QT_DO_IT_ALL],
+[
+ dnl Please leave this alone. I use this file in
+ dnl oprofile.
+ FATAL=0
+
+ AC_ARG_WITH(qt-dir, [ --with-qt-dir where the root of Qt is installed ],
+ [ qt_cv_dir=`eval echo "$withval"/` ])
+
+ AC_ARG_WITH(qt-includes, [ --with-qt-includes where the Qt includes are. ],
+ [ qt_cv_includes=`eval echo "$withval"` ])
+
+ AC_ARG_WITH(qt-libraries, [ --with-qt-libraries where the Qt library is installed.],
+ [ qt_cv_libraries=`eval echo "$withval"` ])
+
+ dnl pay attention to $QTDIR unless overridden
+ if test -z "$qt_cv_dir"; then
+ qt_cv_dir=$QTDIR
+ fi
+
+ dnl derive inc/lib if needed
+ if test -n "$qt_cv_dir"; then
+ if test -z "$qt_cv_includes"; then
+ qt_cv_includes=$qt_cv_dir/include
+ fi
+ if test -z "$qt_cv_libraries"; then
+ qt_cv_libraries=$qt_cv_dir/lib
+ fi
+ fi
+
+ dnl flags for compilation
+ QT_INCLUDES=
+ QT_LDFLAGS=
+ if test -n "$qt_cv_includes"; then
+ QT_INCLUDES="-I$qt_cv_includes"
+ fi
+ if test -n "$qt_cv_libraries"; then
+ QT_LDFLAGS="-L$qt_cv_libraries"
+ fi
+ AC_SUBST(QT_INCLUDES)
+ AC_SUBST(QT_LDFLAGS)
+
+ QT_FIND_MOC
+ MOC=$ac_moc
+ AC_SUBST(MOC)
+ QT_FIND_UIC
+ UIC=$ac_uic
+ AC_SUBST(UIC)
+
+ QT_CHECK_COMPILE
+
+ QT_LIB=$qt_cv_libname;
+ AC_SUBST(QT_LIB)
+
+ if test -n "$qt_cv_libname"; then
+ QT_GET_VERSION
+ fi
+])
+
+dnl AX_CXXFLAGS_OPTIONS(var-name, option)
+dnl add option to var-name if $CXX support it.
+AC_DEFUN([AX_CHECK_PRECOMPILED_HEADER], [
+AC_MSG_CHECKING([whether ${CXX} support precompiled header])
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+SAVE_CXXFLAGS=$CXXFLAGS
+dnl we consider than if -Winvalid-pch is accepted pch will works ...
+CXXFLAGS=-Winvalid-pch
+dnl but we don't want -Winvalid-pch else compilation will fail due -Werror and
+dnl the fact than some pch will be invalid for the given compilation option
+AC_TRY_COMPILE(,[;],AC_MSG_RESULT([yes]); $1="${$1} -include bits/stdc++.h", AC_MSG_RESULT([no]))
+CXXFLAGS=$SAVE_CXXFLAGS
+AC_LANG_RESTORE
+])
+
+dnl AX_CHECK_DOCBOOK
+AC_DEFUN([AX_CHECK_DOCBOOK], [
+# It's just rude to go over the net to build
+XSLTPROC_FLAGS=--nonet
+DOCBOOK_ROOT=
+if test ! -f /etc/xml/catalog; then
+ for i in /usr/share/sgml/docbook/stylesheet/xsl/nwalsh /usr/share/sgml/docbook/xsl-stylesheets/;
+ do
+ if test -d "$i"; then
+ DOCBOOK_ROOT=$i
+ fi
+ done
+
+ # Last resort - try net
+ if test -z "$DOCBOOK_ROOT"; then
+ XSLTPROC_FLAGS=
+ fi
+else
+ XML_CATALOG=/etc/xml/catalog
+ CAT_ENTRY_START='<!--'
+ CAT_ENTRY_END='-->'
+fi
+
+AC_CHECK_PROG(XSLTPROC,xsltproc,xsltproc,)
+XSLTPROC_WORKS=no
+if test -n "$XSLTPROC"; then
+ AC_MSG_CHECKING([whether xsltproc works])
+
+ if test -n "$XML_CATALOG"; then
+ DB_FILE="http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl"
+ else
+ DB_FILE="$DOCBOOK_ROOT/docbook.xsl"
+ fi
+
+ $XSLTPROC $XSLTPROC_FLAGS $DB_FILE >/dev/null 2>&1 << END
+<?xml version="1.0" encoding='ISO-8859-1'?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN" "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd">
+<book id="test">
+</book>
+END
+ if test "$?" = 0; then
+ XSLTPROC_WORKS=yes
+ fi
+ AC_MSG_RESULT($XSLTPROC_WORKS)
+fi
+AM_CONDITIONAL(have_xsltproc, test "$XSLTPROC_WORKS" = "yes")
+
+AC_SUBST(XML_CATALOG)
+AC_SUBST(XSLTPROC_FLAGS)
+AC_SUBST(DOCBOOK_ROOT)
+AC_SUBST(CAT_ENTRY_START)
+AC_SUBST(CAT_ENTRY_END)
+])
+
+dnl AX_CFLAGS_OPTIONS(var-name, option)
+dnl add option to var-name if $CC support it.
+AC_DEFUN([AX_CFLAGS_OPTION], [
+AC_MSG_CHECKING([whether ${CC} $2 is understood])
+AC_LANG_SAVE
+AC_LANG_C
+SAVE_CFLAGS=$CFLAGS
+CFLAGS=$2
+AC_TRY_COMPILE(,[;],AC_MSG_RESULT([yes]); $1="${$1} $2",AC_MSG_RESULT([no]))
+CFLAGS=$SAVE_CFLAGS
+AC_LANG_RESTORE
+])
+
+
+dnl AX_CXXFLAGS_OPTIONS(var-name, option)
+dnl add option to var-name if $CXX support it.
+AC_DEFUN([AX_CXXFLAGS_OPTION], [
+AC_MSG_CHECKING([whether ${CXX} $2 is understood])
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+SAVE_CXXFLAGS=$CXXFLAGS
+CXXFLAGS=$2
+AC_TRY_COMPILE(,[;],AC_MSG_RESULT([yes]); $1="${$1} $2",AC_MSG_RESULT([no]))
+CXXFLAGS=$SAVE_CXXFLAGS
+AC_LANG_RESTORE
+])
+
+dnl AX_COPY_IF_CHANGE(source, dest)
+dnl copy source to dest if they don't compare equally or if dest doesn't exist
+AC_DEFUN([AX_COPY_IF_CHANGE], [
+if test -r $2; then
+ if cmp $1 $2 > /dev/null; then
+ echo $2 is unchanged
+ else
+ cp -f $1 $2
+ fi
+else
+ cp -f $1 $2
+fi
+])
+
--- /dev/null
+
+#
+# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
+#
+
+Index: oprofile-0.9/libutil++/bfd_support.cpp
+===================================================================
+--- oprofile-0.9.orig/libutil++/bfd_support.cpp 2005-05-05 15:43:46.000000000 +0100
++++ oprofile-0.9/libutil++/bfd_support.cpp 2005-06-10 10:18:24.000000000 +0100
+@@ -330,6 +330,11 @@
+ // returning true for fix up in op_bfd_symbol()
+ if (!sym->name || sym->name[0] == '\0')
+ return true;
++ /* ARM assembler internal mapping symbols aren't interesting */
++ if ((strcmp("$a", sym->name) == 0) ||
++ (strcmp("$t", sym->name) == 0) ||
++ (strcmp("$d", sym->name) == 0))
++ return false;
+
+ // C++ exception stuff
+ if (sym->name[0] == '.' && sym->name[1] == 'L')
--- /dev/null
+dnl AX_KERNEL_OPTION(option, action-if-found, action-if-not-found)
+dnl see if autoconf.h defines the option
+AC_DEFUN([AX_KERNEL_OPTION], [
+SAVE_CFLAGS=$CFLAGS
+CFLAGS="-I$KINC -O2 -D__KERNEL__"
+AC_TRY_COMPILE( [#include <linux/config.h>],
+[
+#ifndef $1
+break_me_hard(\\\);
+#endif
+],[$2],[$3],)
+CFLAGS=$SAVE_CFLAGS
+])
+
+dnl Handle the 2.4 module inside module/
+AC_DEFUN([AX_CONFIG_MODULE],
+[
+if test ! -f $KINC/linux/autoconf.h; then
+ AC_MSG_ERROR([no suitably configured kernel include tree found])
+fi
+
+dnl --- Get Linux kernel version and compile parameters ---
+
+AC_SUBST(KVERS)
+AC_MSG_CHECKING([for kernel version])
+dnl it's like this to handle mandrake's fubar version.h - bug #471448
+eval KVERS=`gcc -I$KINC -E -dM $KINC/linux/version.h | grep -w UTS_RELEASE | awk '{print $[]3}'`
+AC_MSG_RESULT([$KVERS])
+case "$KVERS" in
+2.2.*|2.4.*) ;;
+*) AC_MSG_ERROR([Unsupported kernel version])
+esac
+
+dnl Check for the minimal kernel version supported
+AC_MSG_CHECKING([kernel version])
+AX_KERNEL_VERSION(2, 2, 10, <=, AC_MSG_RESULT([ok]), AC_MSG_ERROR([check html documentation install section]))
+
+dnl linux/spinlock.h added at some point in past
+AC_MSG_CHECKING([for $KINC/linux/spinlock.h])
+if test -f $KINC/linux/spinlock.h; then
+ EXTRA_CFLAGS_MODULE="$EXTRA_CFLAGS_MODULE -DHAVE_LINUX_SPINLOCK_HEADER"
+ AC_MSG_RESULT([yes])
+else
+ AC_MSG_RESULT([no])
+fi
+
+AC_MSG_CHECKING([for rtc_lock])
+gcc -I$KINC -E $KINC/linux/mc146818rtc.h | grep rtc_lock >/dev/null
+if test "$?" -eq 0; then
+ EXTRA_CFLAGS_MODULE="$EXTRA_CFLAGS_MODULE -DRTC_LOCK"
+ AC_MSG_RESULT([yes])
+else
+ AC_MSG_RESULT([no])
+fi
+
+arch="unknown"
+AC_MSG_CHECKING(for x86-64 architecture)
+AX_KERNEL_OPTION(CONFIG_X86_64, x8664=1, x8664=0)
+AX_MSG_RESULT_YN($x8664)
+BUILD_HAMMER=no
+if test "$x8664" -eq 1; then
+ arch="x86"
+ BUILD_HAMMER=yes
+else
+ AC_MSG_CHECKING(for x86 architecture)
+ AX_KERNEL_OPTION(CONFIG_X86, x86=1, x86=0)
+ AX_KERNEL_OPTION(CONFIG_X86_WP_WORKS_OK, x86=1, x86=$x86)
+ AX_MSG_RESULT_YN($x86)
+ test "$x86" = 1 && arch="x86"
+
+ if test "$arch" = "unknown"; then
+ AC_MSG_CHECKING(for ia64 architecture)
+ AX_KERNEL_OPTION(CONFIG_IA64, ia64=1, ia64=0)
+ AX_MSG_RESULT_YN($ia64)
+ test "$ia64" = 1 && arch="ia64"
+ fi
+
+fi
+AC_SUBST(BUILD_HAMMER)
+
+test "$arch" = "unknown" && AC_MSG_ERROR(Unsupported architecture)
+
+dnl check to see if kernel verion appropriate for arch
+AC_MSG_CHECKING(arch/kernel version combination)
+case "$arch" in
+ia64)
+ AX_KERNEL_VERSION(2, 4, 18, <, AC_MSG_RESULT([ok]),
+ AC_MSG_ERROR([unsupported arch/kernel])) ;;
+*) AC_MSG_RESULT([ok])
+esac
+
+dnl for now we do not support PREEMPT patch
+AC_MSG_CHECKING([for preempt patch])
+AX_KERNEL_OPTION(CONFIG_PREEMPT,preempt=1,preempt=0)
+AX_MSG_RESULT_YN([$preempt])
+test "$preempt" = 0 || AC_MSG_ERROR([unsupported kernel configuration : CONFIG_PREEMPT])
+
+AC_SUBST(KINC)
+
+MODINSTALLDIR=/lib/modules/$KVERS
+
+OPROFILE_MODULE_ARCH=$arch
+AC_SUBST(OPROFILE_MODULE_ARCH)
+]
+)
+
+dnl AX_KERNEL_VERSION(major, minor, level, comparison, action-if-true, action-if-false)
+AC_DEFUN([AX_KERNEL_VERSION], [
+SAVE_CFLAGS=$CFLAGS
+CFLAGS="-I$KINC -D__KERNEL__ -Werror"
+AC_TRY_COMPILE(
+ [
+ #include <linux/version.h>
+ #include <linux/config.h>
+ ],
+ [
+ #if LINUX_VERSION_CODE $4 KERNEL_VERSION($1, $2, $3)
+ break_me_hard(\\\);
+ #endif
+ ],
+[$5],[$6],)
+CFLAGS=$SAVE_CFLAGS
+])
+
+
+dnl AX_MSG_RESULT_YN(a)
+dnl results "yes" iff a==1, "no" else
+AC_DEFUN([AX_MSG_RESULT_YN], [x=no
+test "x$1" = "x1" && x=yes
+AC_MSG_RESULT($x)])
+
+dnl AX_MALLOC_ATTRIBUTE - see if gcc will take __attribute__((malloc))
+AC_DEFUN([AX_MALLOC_ATTRIBUTE],
+[
+AC_MSG_CHECKING([whether malloc attribute is understood])
+SAVE_CFLAGS=$CFLAGS
+CFLAGS="-Werror $CFLAGS"
+AC_TRY_COMPILE(,[
+void monkey() __attribute__((malloc));
+],AC_MSG_RESULT([yes]); AC_DEFINE(MALLOC_ATTRIBUTE_OK, 1, [whether malloc attribute is understood]), AC_MSG_RESULT([no]))
+CFLAGS=$SAVE_CFLAGS
+]
+)
+
+dnl builtin_expect is used in module we can't add that in config.h
+AC_DEFUN([AX_BUILTIN_EXPECT],
+[
+AC_MSG_CHECKING([whether __builtin_expect is understood])
+SAVE_CFLAGS=$CFLAGS
+CFLAGS="-Werror $CFLAGS"
+AC_TRY_LINK(,[
+int i;
+if (__builtin_expect(i, 0)) { }
+],
+AC_MSG_RESULT([yes]); EXTRA_CFLAGS_MODULE="$EXTRA_CFLAGS_MODULE -DEXPECT_OK",
+AC_MSG_RESULT([no]);)
+CFLAGS=$SAVE_CFLAGS
+]
+)
+
+dnl AX_EXTRA_DIRS - Let user specify extra dirs for include/libs
+AC_DEFUN([AX_EXTRA_DIRS],
+[
+AC_ARG_WITH(extra-includes,
+[ --with-extra-includes=DIR add extra include paths],
+ use_extra_includes="$withval",
+ use_extra_includes=NO
+)
+if test -n "$use_extra_includes" && \
+ test "$use_extra_includes" != "NO"; then
+ ac_save_ifs=$IFS
+ IFS=':'
+ for dir in $use_extra_includes; do
+ extra_includes="$extra_includes -I$dir"
+ done
+ IFS=$ac_save_ifs
+ CPPFLAGS="$CPPFLAGS $extra_includes"
+fi
+
+AC_ARG_WITH(extra-libs,
+[ --with-extra-libs=DIR add extra library paths],
+ use_extra_libs=$withval,
+ use_extra_libs=NO
+)
+if test -n "$use_extra_libs" && \
+ test "$use_extra_libs" != "NO"; then
+ ac_save_ifs=$IFS
+ IFS=':'
+ for dir in $use_extra_libs; do
+ extra_libraries="$extra_libraries -L$dir"
+ done
+ IFS=$ac_save_ifs
+ LDFLAGS="$LDFLAGS $extra_libraries"
+fi
+]
+)
+
+dnl AX_POPT_CONST - check popt prototype
+AC_DEFUN([AX_POPT_CONST],
+[
+AC_MSG_CHECKING([popt prototype])
+SAVE_CXXFLAGS=$CXXFLAGS
+CXXFLAGS="-Werror $CXXFLAGS"
+AC_TRY_COMPILE([#include <popt.h>],
+[
+int c; char **v;
+poptGetContext(0, c, v, 0, 0);
+],
+AC_MSG_RESULT([takes char **]);,
+AC_MSG_RESULT([takes const char **]); AC_DEFINE(CONST_POPT, 1, [whether popt prototype takes a const char **]))
+CXXFLAGS="$SAVE_CXXFLAGS"
+]
+)
+
+dnl AX_CHECK_SSTREAM - check if local sstream is needed to compile OK
+AC_DEFUN([AX_CHECK_SSTREAM],
+[
+AC_MSG_CHECKING([whether to use included sstream])
+AC_TRY_COMPILE([#include <sstream>], [],
+AC_MSG_RESULT([no]);,
+AC_MSG_RESULT([yes]); OP_CXXFLAGS="$OP_CXXFLAGS -I\${top_srcdir}/include")
+]
+)
+
+dnl AX_CHECK_TYPEDEF(typedef_name, type, action-if-true, action-if-false)
+dnl exec action-if-true if typedef_name is a typedef to type else exec
+dnl action-if-false
+dnl currently work only with type typedef'ed in stddef.h
+AC_DEFUN([AX_CHECK_TYPEDEF], [
+dnl AC_LANG_PUSH(C) not in autoconf 2.13
+AC_LANG_SAVE
+AC_LANG_C
+SAVE_CFLAGS=$CFLAGS
+CFLAGS="-Werror $CFLAGS"
+
+AC_TRY_COMPILE(
+ [
+ #include <stddef.h>
+ ],
+ [
+ typedef void (*fct1)($1);
+ typedef void (*fct2)($2);
+ fct1 f1 = 0;
+ fct2 f2 = 0;
+ if (f1 == f2) {}
+ ],
+[$3],[$4])
+
+CFLAGS=$SAVE_CFLAGS
+AC_LANG_RESTORE
+])
+
+
+dnl AX_TYPEDEFED_NAME(typedef_name, candidate_list, var_name)
+dnl set var_name to the typedef name of $1 which must be in canditate_list
+dnl else produce a fatal error
+AC_DEFUN([AX_TYPEDEFED_NAME], [
+ AC_MSG_CHECKING([type of $1])
+ for f in $2; do
+ AX_CHECK_TYPEDEF($1, $f, $3="$f", $3="")
+ if test -n "${$3}"; then
+ break
+ fi
+ done
+ if test -n "${$3}"; then
+ AC_MSG_RESULT([${$3}])
+ else
+ AC_MSG_ERROR([not found])
+ fi
+])
+
+dnl find a binary in the path
+AC_DEFUN([QT_FIND_PATH],
+[
+ AC_MSG_CHECKING([for $1])
+ AC_CACHE_VAL(qt_cv_path_$1,
+ [
+ qt_cv_path_$1="NONE"
+ if test -n "$$2"; then
+ qt_cv_path_$1="$$2";
+ else
+ dirs="$3"
+ qt_save_IFS=$IFS
+ IFS=':'
+ for dir in $PATH; do
+ dirs="$dirs $dir"
+ done
+ IFS=$qt_save_IFS
+
+ for dir in $dirs; do
+ if test -x "$dir/$1"; then
+ if test -n "$5"; then
+ evalstr="$dir/$1 $5 2>&1 "
+ if eval $evalstr; then
+ qt_cv_path_$1="$dir/$1"
+ break
+ fi
+ else
+ qt_cv_path_$1="$dir/$1"
+ break
+ fi
+ fi
+ done
+ fi
+ ])
+
+ if test -z "$qt_cv_path_$1" || test "$qt_cv_path_$1" = "NONE"; then
+ AC_MSG_RESULT(not found)
+ $4
+ else
+ AC_MSG_RESULT($qt_cv_path_$1)
+ $2=$qt_cv_path_$1
+ fi
+])
+
+dnl Find the uic compiler on the path or in qt_cv_dir
+AC_DEFUN([QT_FIND_UIC],
+[
+ QT_FIND_PATH(uic, ac_uic, $qt_cv_dir/bin)
+ if test -z "$ac_uic" -a "$FATAL" = 1; then
+ AC_MSG_ERROR([uic binary not found in \$PATH or $qt_cv_dir/bin !])
+ fi
+])
+
+dnl Find the right moc in path/qt_cv_dir
+AC_DEFUN([QT_FIND_MOC],
+[
+ QT_FIND_PATH(moc2, ac_moc2, $qt_cv_dir/bin)
+ QT_FIND_PATH(moc, ac_moc1, $qt_cv_dir/bin)
+
+ if test -n "$ac_moc1" -a -n "$ac_moc2"; then
+ dnl found both. Prefer Qt3's if it exists else moc2
+ $ac_moc1 -v 2>&1 | grep "Qt 3" >/dev/null
+ if test "$?" = 0; then
+ ac_moc=$ac_moc1;
+ else
+ ac_moc=$ac_moc2;
+ fi
+ else
+ if test -n "$ac_moc1"; then
+ ac_moc=$ac_moc1;
+ else
+ ac_moc=$ac_moc2;
+ fi
+ fi
+
+ if test -z "$ac_moc" -a "$FATAL" = 1; then
+ AC_MSG_ERROR([moc binary not found in \$PATH or $qt_cv_dir/bin !])
+ fi
+])
+
+dnl check a particular libname
+AC_DEFUN([QT_TRY_LINK],
+[
+ SAVE_LIBS="$LIBS"
+ LIBS="$LIBS $1"
+ AC_TRY_LINK([
+ #include <qglobal.h>
+ #include <qstring.h>
+ ],
+ [
+ QString s("mangle_failure");
+ #if (QT_VERSION < 221)
+ break_me_(\\\);
+ #endif
+ ],
+ qt_cv_libname=$1,
+ )
+ LIBS="$SAVE_LIBS"
+])
+
+dnl check we can do a compile
+AC_DEFUN([QT_CHECK_COMPILE],
+[
+ AC_MSG_CHECKING([for Qt library name])
+
+ AC_CACHE_VAL(qt_cv_libname,
+ [
+ AC_LANG_CPLUSPLUS
+ SAVE_CXXFLAGS=$CXXFLAGS
+ CXXFLAGS="$CXXFLAGS $QT_INCLUDES $QT_LDFLAGS"
+
+ for libname in -lqt-mt -lqt3 -lqt2 -lqt;
+ do
+ QT_TRY_LINK($libname)
+ if test -n "$qt_cv_libname"; then
+ break;
+ fi
+ done
+
+ CXXFLAGS=$SAVE_CXXFLAGS
+ ])
+
+ if test -z "$qt_cv_libname"; then
+ AC_MSG_RESULT([failed])
+ if test "$FATAL" = 1 ; then
+ AC_MSG_ERROR([Cannot compile a simple Qt executable. Check you have the right \$QTDIR !])
+ fi
+ else
+ AC_MSG_RESULT([$qt_cv_libname])
+ fi
+])
+
+dnl get Qt version we're using
+AC_DEFUN([QT_GET_VERSION],
+[
+ AC_CACHE_CHECK([Qt version],lyx_cv_qtversion,
+ [
+ AC_LANG_CPLUSPLUS
+ SAVE_CPPFLAGS=$CPPFLAGS
+ CPPFLAGS="$CPPFLAGS $QT_INCLUDES"
+
+ cat > conftest.$ac_ext <<EOF
+#line __oline__ "configure"
+#include "confdefs.h"
+#include <qglobal.h>
+"%%%"QT_VERSION_STR"%%%"
+EOF
+ lyx_cv_qtversion=`(eval "$ac_cpp conftest.$ac_ext") 2>&5 | \
+ grep '^"%%%"' 2>/dev/null | \
+ sed -e 's/"%%%"//g' -e 's/"//g'`
+ rm -f conftest.$ac_ext
+ CPPFLAGS=$SAVE_CPPFLAGS
+ ])
+
+ QT_VERSION=$lyx_cv_qtversion
+ AC_SUBST(QT_VERSION)
+])
+
+dnl start here
+AC_DEFUN([QT_DO_IT_ALL],
+[
+ dnl Please leave this alone. I use this file in
+ dnl oprofile.
+ FATAL=0
+
+ AC_ARG_WITH(qt-dir, [ --with-qt-dir where the root of Qt is installed ],
+ [ qt_cv_dir=`eval echo "$withval"/` ])
+
+ AC_ARG_WITH(qt-includes, [ --with-qt-includes where the Qt includes are. ],
+ [ qt_cv_includes=`eval echo "$withval"` ])
+
+ AC_ARG_WITH(qt-libraries, [ --with-qt-libraries where the Qt library is installed.],
+ [ qt_cv_libraries=`eval echo "$withval"` ])
+
+ dnl pay attention to $QTDIR unless overridden
+ if test -z "$qt_cv_dir"; then
+ qt_cv_dir=$QTDIR
+ fi
+
+ dnl derive inc/lib if needed
+ if test -n "$qt_cv_dir"; then
+ if test -z "$qt_cv_includes"; then
+ qt_cv_includes=$qt_cv_dir/include
+ fi
+ if test -z "$qt_cv_libraries"; then
+ qt_cv_libraries=$qt_cv_dir/lib
+ fi
+ fi
+
+ dnl flags for compilation
+ QT_INCLUDES=
+ QT_LDFLAGS=
+ if test -n "$qt_cv_includes"; then
+ QT_INCLUDES="-I$qt_cv_includes"
+ fi
+ if test -n "$qt_cv_libraries"; then
+ QT_LDFLAGS="-L$qt_cv_libraries"
+ fi
+ AC_SUBST(QT_INCLUDES)
+ AC_SUBST(QT_LDFLAGS)
+
+ QT_FIND_MOC
+ MOC=$ac_moc
+ AC_SUBST(MOC)
+ QT_FIND_UIC
+ UIC=$ac_uic
+ AC_SUBST(UIC)
+
+ QT_CHECK_COMPILE
+
+ QT_LIB=$qt_cv_libname;
+ AC_SUBST(QT_LIB)
+
+ if test -n "$qt_cv_libname"; then
+ QT_GET_VERSION
+ fi
+])
+
+dnl AX_CXXFLAGS_OPTIONS(var-name, option)
+dnl add option to var-name if $CXX support it.
+AC_DEFUN([AX_CHECK_PRECOMPILED_HEADER], [
+AC_MSG_CHECKING([whether ${CXX} support precompiled header])
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+SAVE_CXXFLAGS=$CXXFLAGS
+dnl we consider than if -Winvalid-pch is accepted pch will works ...
+CXXFLAGS=-Winvalid-pch
+dnl but we don't want -Winvalid-pch else compilation will fail due -Werror and
+dnl the fact than some pch will be invalid for the given compilation option
+AC_TRY_COMPILE(,[;],AC_MSG_RESULT([yes]); $1="${$1} -include bits/stdc++.h", AC_MSG_RESULT([no]))
+CXXFLAGS=$SAVE_CXXFLAGS
+AC_LANG_RESTORE
+])
+
+dnl AX_CHECK_DOCBOOK
+AC_DEFUN([AX_CHECK_DOCBOOK], [
+# It's just rude to go over the net to build
+XSLTPROC_FLAGS=--nonet
+DOCBOOK_ROOT=
+if test ! -f /etc/xml/catalog; then
+ for i in /usr/share/sgml/docbook/stylesheet/xsl/nwalsh /usr/share/sgml/docbook/xsl-stylesheets/;
+ do
+ if test -d "$i"; then
+ DOCBOOK_ROOT=$i
+ fi
+ done
+
+ # Last resort - try net
+ if test -z "$DOCBOOK_ROOT"; then
+ XSLTPROC_FLAGS=
+ fi
+else
+ XML_CATALOG=/etc/xml/catalog
+ CAT_ENTRY_START='<!--'
+ CAT_ENTRY_END='-->'
+fi
+
+AC_CHECK_PROG(XSLTPROC,xsltproc,xsltproc,)
+XSLTPROC_WORKS=no
+if test -n "$XSLTPROC"; then
+ AC_MSG_CHECKING([whether xsltproc works])
+
+ if test -n "$XML_CATALOG"; then
+ DB_FILE="http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl"
+ else
+ DB_FILE="$DOCBOOK_ROOT/docbook.xsl"
+ fi
+
+ $XSLTPROC $XSLTPROC_FLAGS $DB_FILE >/dev/null 2>&1 << END
+<?xml version="1.0" encoding='ISO-8859-1'?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN" "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd">
+<book id="test">
+</book>
+END
+ if test "$?" = 0; then
+ XSLTPROC_WORKS=yes
+ fi
+ AC_MSG_RESULT($XSLTPROC_WORKS)
+fi
+AM_CONDITIONAL(have_xsltproc, test "$XSLTPROC_WORKS" = "yes")
+
+AC_SUBST(XML_CATALOG)
+AC_SUBST(XSLTPROC_FLAGS)
+AC_SUBST(DOCBOOK_ROOT)
+AC_SUBST(CAT_ENTRY_START)
+AC_SUBST(CAT_ENTRY_END)
+])
+
+dnl AX_CFLAGS_OPTIONS(var-name, option)
+dnl add option to var-name if $CC support it.
+AC_DEFUN([AX_CFLAGS_OPTION], [
+AC_MSG_CHECKING([whether ${CC} $2 is understood])
+AC_LANG_SAVE
+AC_LANG_C
+SAVE_CFLAGS=$CFLAGS
+CFLAGS=$2
+AC_TRY_COMPILE(,[;],AC_MSG_RESULT([yes]); $1="${$1} $2",AC_MSG_RESULT([no]))
+CFLAGS=$SAVE_CFLAGS
+AC_LANG_RESTORE
+])
+
+
+dnl AX_CXXFLAGS_OPTIONS(var-name, option)
+dnl add option to var-name if $CXX support it.
+AC_DEFUN([AX_CXXFLAGS_OPTION], [
+AC_MSG_CHECKING([whether ${CXX} $2 is understood])
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+SAVE_CXXFLAGS=$CXXFLAGS
+CXXFLAGS=$2
+AC_TRY_COMPILE(,[;],AC_MSG_RESULT([yes]); $1="${$1} $2",AC_MSG_RESULT([no]))
+CXXFLAGS=$SAVE_CXXFLAGS
+AC_LANG_RESTORE
+])
+
+dnl AX_COPY_IF_CHANGE(source, dest)
+dnl copy source to dest if they don't compare equally or if dest doesn't exist
+AC_DEFUN([AX_COPY_IF_CHANGE], [
+if test -r $2; then
+ if cmp $1 $2 > /dev/null; then
+ echo $2 is unchanged
+ else
+ cp -f $1 $2
+ fi
+else
+ cp -f $1 $2
+fi
+])
+
--- /dev/null
+
+#
+# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
+#
+
+Index: oprofile-0.9/libutil++/bfd_support.cpp
+===================================================================
+--- oprofile-0.9.orig/libutil++/bfd_support.cpp 2005-05-05 15:43:46.000000000 +0100
++++ oprofile-0.9/libutil++/bfd_support.cpp 2005-06-10 10:18:24.000000000 +0100
+@@ -330,6 +330,11 @@
+ // returning true for fix up in op_bfd_symbol()
+ if (!sym->name || sym->name[0] == '\0')
+ return true;
++ /* ARM assembler internal mapping symbols aren't interesting */
++ if ((strcmp("$a", sym->name) == 0) ||
++ (strcmp("$t", sym->name) == 0) ||
++ (strcmp("$d", sym->name) == 0))
++ return false;
+
+ // C++ exception stuff
+ if (sym->name[0] == '.' && sym->name[1] == 'L')
--- /dev/null
+SECTION = "devel"
+DESCRIPTION = "OProfile is a system-wide profiler for Linux systems, capable \
+of profiling all running code at low overhead."
+LICENSE = "GPL"
+MAINTAINER = "Chris Larson <kergoth@handhelds.org>"
+DEPENDS = "popt binutils"
+
+SRC_URI = "${SOURCEFORGE_MIRROR}/oprofile/oprofile-${PV}.tar.gz \
+ file://no_arm_mapping_syms.patch;patch=1 \
+ file://acinclude.m4"
+S = "${WORKDIR}/oprofile-${PV}"
+
+inherit autotools
+
+# NOTE: this disables the build of the kernel modules.
+# Should add the oprofile kernel modules, for those with 2.4
+# kernels, as a seperate .oe file.
+EXTRA_OECONF = "--with-kernel-support \
+ --without-x"
+
+do_configure () {
+ cp ${WORKDIR}/acinclude.m4 ${S}/
+ autotools_do_configure
+}
+# Available config options
+# --enable-abi enable abi portability code (default is disabled)
+# --enable-pch enable precompiled header (default is disabled)
+# --enable-gcov enable option for gcov coverage testing (default is disabled)
+# --disable-werror disable -Werror flag (default is enabled for non-release)
+# --disable-optimization disable optimization flags (default is enabled)
+# --with-kernel-support Use 2.6 kernel (no kernel source tree required)
+# --with-linux=dir Path to Linux source tree
+# --with-module-dir=dir Path to module installation directory
+# --with-extra-includes=DIR add extra include paths
+# --with-extra-libs=DIR add extra library paths
+# --with-x use the X Window System
+# --with-qt-dir where the root of Qt is installed
+# --with-qt-includes where the Qt includes are.
+# --with-qt-libraries where the Qt library is installed.
--- /dev/null
+PV = "0.0cvs${CVSDATE}"
+SECTION = "devel"
+DESCRIPTION = "OProfile is a system-wide profiler for Linux systems, capable \
+of profiling all running code at low overhead."
+LICENSE = "GPL"
+MAINTAINER = "Chris Larson <kergoth@handhelds.org>"
+DEPENDS = "popt binutils"
+
+SRC_URI = "cvs://anonymous@cvs.sourceforge.net/cvsroot/oprofile;module=oprofile \
+ file://no_arm_mapping_syms.patch;patch=1 \
+ file://acinclude.m4"
+S = "${WORKDIR}/oprofile"
+
+inherit autotools
+
+# NOTE: this disables the build of the kernel modules.
+# Should add the oprofile kernel modules, for those with 2.4
+# kernels, as a seperate .oe file.
+EXTRA_OECONF = "--with-kernel-support \
+ --without-x \
+ --disable-werror "
+
+do_configure () {
+ cp ${WORKDIR}/acinclude.m4 ${S}/
+ autotools_do_configure
+}
+# Available config options
+# --enable-abi enable abi portability code (default is disabled)
+# --enable-pch enable precompiled header (default is disabled)
+# --enable-gcov enable option for gcov coverage testing (default is disabled)
+# --disable-werror disable -Werror flag (default is enabled for non-release)
+# --disable-optimization disable optimization flags (default is enabled)
+# --with-kernel-support Use 2.6 kernel (no kernel source tree required)
+# --with-linux=dir Path to Linux source tree
+# --with-module-dir=dir Path to module installation directory
+# --with-extra-includes=DIR add extra include paths
+# --with-extra-libs=DIR add extra library paths
+# --with-x use the X Window System
+# --with-qt-dir where the root of Qt is installed
+# --with-qt-includes where the Qt includes are.
+# --with-qt-libraries where the Qt library is installed.
