imx: mx6ull: adjust POR_B setting for i.MX6ULL

Adjust POR_B settings on i.MX6ULL according to IC design
team's suggestion:

2'b00 :  always PUP100K
2'b01 :  PUP100K when PMIC_ON_REQ || SOC_NOT_FAIL
2'b10 :  always disable PUP100K
2'b11 :  PDN100K when SOC_FAIL, PUP100K when SOC_NOT_FAIL -- recommended setting

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>

diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index f062d867b00c2e4275197b2eae4127b8ce42af0d..c55251299eb6466c9fc966447674d38f7d911f59 100644 (file)
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -366,6 +366,20 @@ int arch_cpu_init(void)
                writel(0x0000b8a0, IOMUXC_BASE_ADDR + 0x29c);
        }
 
+       if (is_mx6ull()) {
+               /*
+                * GPBIT[1:0] is suggested to set to 2'b11:
+                * 2'b00 : always PUP100K
+                * 2'b01 : PUP100K when PMIC_ON_REQ or SOC_NOT_FAIL
+                * 2'b10 : always disable PUP100K
+                * 2'b11 : PDN100K when SOC_FAIL, PUP100K when SOC_NOT_FAIL
+                * register offset is different from i.MX6UL, since
+                * i.MX6UL is fixed by ECO.
+                */
+               writel(readl(MX6UL_SNVS_LP_BASE_ADDR) |
+                       0x3, MX6UL_SNVS_LP_BASE_ADDR);
+       }
+
        /* Set perclk to source from OSC 24MHz */
 #if defined(CONFIG_MX6SL)
        set_preclk_from_osc();