imx6solosabresd.conf: Add ldo device tree

ENGR00277895: dts: ARM: imx6: add ldo-enable dts files

  Currently, we use different dts files to support ldo-bypass or ldo-enable, then
we need add both dts files for the boards which can support ldo-bypass mode(all
boards support ldo-enable at least). So for below boards we need add ldo-enable
dts file so that we can use this to easily support ldo-enable mode:
  1)mx6q-sabresd board:  ldo-bypass dts->mx6q-sabresd.dtb,
                         ldo-enable dts->mx6q-sabresd-ldo.dtb
  2)mx6q-sabresd board:  ldo-bypass dts->mx6dl-sabresd.dtb,
                 ldo-enable dts->mx6dl-sabresd-ldo.dtb
  3)mx6sl-evk board:     ldo-bypass dts->mx6sl-evk.dtb,
                 ldo-enable dts->mx6sl-evk-ldo.dtb

Change-Id: I261c516495e3921fb1c2d8937d96fb6e3a23e87b
Signed-off-by: Lauren Post <lauren.post@freescale.com>

diff --git a/meta-fsl-arm/conf/machine/imx6solosabresd.conf b/meta-fsl-arm/conf/machine/imx6solosabresd.conf
index cfc30d2e1cf4d6e9b22ebf0dfc34b3a096de6fcf..5782268b886a6ab7a39e744489a69e8221b18ede 100644 (file)
--- a/meta-fsl-arm/conf/machine/imx6solosabresd.conf
+++ b/meta-fsl-arm/conf/machine/imx6solosabresd.conf
@@ -7,7 +7,7 @@ require conf/machine/include/imx6sabresd-common.inc
 
 SOC_FAMILY = "mx6:mx6s"
 
-KERNEL_DEVICETREE = "imx6dl-sabresd.dtb"
+KERNEL_DEVICETREE = "imx6dl-sabresd.dtb imx6dl-sabresd-ldo.dtb"
 
 PREFERRED_PROVIDER_u-boot = "u-boot-imx"
 PREFERRED_PROVIDER_virtual/bootloader = "u-boot-imx"