# with this program; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
# Call setting:
# QEMU_MEMORY (optional) - set the amount of memory in the emualted system.
# SERIAL_LOGFILE (optional) - log the serial port output to a file
#
# Image options:
# MACHINE - the machine to run
-# TYPE - the image type to run
-# ZIMAGE - the kernel image file to use
-# HDIMAGE - the disk image file to use
+# FSTYPE - the image type to run
+# KERNEL - the kernel image file to use
+# ROOTFS - the disk image file to use
#
if [ -z "$QEMU_MEMORY" ]; then
- case "$MACHINE" in
- "qemux86")
- QEMU_MEMORY="128M"
- ;;
- "qemux86-64")
- QEMU_MEMORY="128M"
- ;;
- "qemumips")
- QEMU_MEMORY="128M"
- ;;
- "qemuppc")
- QEMU_MEMORY="128M"
- ;;
- *)
- QEMU_MEMORY="64M"
- ;;
- esac
+ case "$MACHINE" in
+ "qemux86")
+ QEMU_MEMORY="128M"
+ ;;
+ "qemux86-64")
+ QEMU_MEMORY="128M"
+ ;;
+ "qemumips")
+ QEMU_MEMORY="128M"
+ ;;
+ "qemuppc")
+ QEMU_MEMORY="128M"
+ ;;
+ *)
+ QEMU_MEMORY="64M"
+ ;;
+ esac
fi
QEMUIFUP=`which poky-qemu-ifup`
QEMUIFDOWN=`which poky-qemu-ifdown`
+NFSRUNNING="false"
+
LOCKDIR="/tmp/qemu-tap-locks"
[ ! -d "$LOCKDIR" ] && mkdir $LOCKDIR
for tap in $POSSIBLE; do
LOCKFILE="$LOCKDIR/$tap"
if lockfile -2 -r 1 $LOCKFILE; then
- TAP=$tap
- break;
+ TAP=$tap
+ break;
fi
done
fi
LOCKFILE="$LOCKDIR/$tap"
if lockfile $LOCKFILE; then
- TAP=$tap
- break;
+ TAP=$tap
fi
else
echo "Using preconfigured tap device '$TAP'"
echo "Releasing lockfile of preconfigured tap device '$TAP'"
rm -f $LOCKFILE
fi
+
+ if [ "$NFSRUNNING" = "true" ]; then
+ echo "Shutting down the userspace NFS server:"
+ echo "poky-export-rootfs stop $ROOTFS"
+ poky-export-rootfs stop $ROOTFS
+ fi
}
n1=$[ (`echo $TAP | sed 's/tap//'` * 2) + 1 ]
fi
case "$MACHINE" in
- "qemuarm") ;;
- "qemumips") ;;
- "qemuppc") ;;
- "qemuarmv6") ;;
- "qemuarmv7") ;;
- "qemux86") ;;
- "qemux86-64") ;;
- "akita") ;;
- "spitz") ;;
- "nokia800") ;;
- "nokia800-maemo") ;;
- *)
- echo "Error: Unsupported machine type $MACHINE"
- return
- ;;
+ "qemuarm") ;;
+ "qemumips") ;;
+ "qemuppc") ;;
+ "qemuarmv6") ;;
+ "qemuarmv7") ;;
+ "qemux86") ;;
+ "qemux86-64") ;;
+ "akita") ;;
+ "spitz") ;;
+ *)
+ echo "Error: Unsupported machine type $MACHINE"
+ return
+ ;;
esac
-if [ "$TYPE" != "nfs" -a ! -f "$HDIMAGE" ]; then
- echo "Error: Image file $HDIMAGE doesn't exist"
+if [ ! -f "$KERNEL" ]; then
+ echo "Error: Kernel image file $KERNEL doesn't exist"
release_lock
return
fi
-if [ "$TYPE" = "nfs" ]; then
+if [ "$FSTYPE" != "nfs" -a ! -f "$ROOTFS" ]; then
+ echo "Error: Image file $ROOTFS doesn't exist"
+ release_lock
+ return
+fi
+
+if [ "$FSTYPE" = "nfs" ]; then
NFS_SERVER="192.168.7.1"
- NFS_DIR=`echo $HDIMAGE | sed 's/^[^:]*:\(.*\)/\1/'`
+ NFS_DIR=`echo $ROOTFS | sed 's/^[^:]*:\(.*\)/\1/'`
UNFS_OPTS="nfsvers=2,mountprog=21111,nfsprog=11111,udp"
+
+ PSEUDO_LOCALSTATEDIR=~/.poky-sdk/pseudo
+ export PSEUDO_LOCALSTATEDIR
+
+ rpcbind_running=`ps ax | grep rpcbind | grep -v grep | wc -l`
+ portmap_running=`ps ax | grep portmap | grep -v grep | wc -l`
+ if [[ $rpcbind_running == 0 && $portmap_running == 0 ]]; then
+ echo "You need to be running either rpcbind or portmap to continue"
+ release_lock
+ return
+ fi
+
+ # Start the userspace NFS server
+ echo "poky-export-rootfs restart $ROOTFS"
+ poky-export-rootfs restart $ROOTFS
+ if [ $? != 0 ]; then
+ release_lock
+ return
+ fi
+ NFSRUNNING="true"
fi
if [ "$NFS_SERVER" = "" ]; then
NFS_SERVER="192.168.7.1"
- NFS_DIR=$HDIMAGE
-fi
-
-if [ ! -f "$ZIMAGE" ]; then
- echo "Error: Kernel image file $ZIMAGE doesn't exist"
- release_lock
- return
+ NFS_DIR=$ROOTFS
fi
if [ "$MACHINE" = "qemuarm" -o "$MACHINE" = "qemuarmv6" -o "$MACHINE" = "qemuarmv7" ]; then
MACHINE_SUBTYPE=versatilepb
QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS"
# QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS -force-pointer"
- if [ "$TYPE" = "ext3" ]; then
+ if [ "$FSTYPE" = "ext3" ]; then
KERNCMDLINE="root=/dev/sda console=ttyAMA0,115200 console=tty $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY highres=off"
- QEMUOPTIONS="$QEMU_NETWORK_CMD -M versatilepb -hda $HDIMAGE -no-reboot $QEMU_UI_OPTIONS"
+ QEMUOPTIONS="$QEMU_NETWORK_CMD -M versatilepb -hda $ROOTFS -no-reboot $QEMU_UI_OPTIONS"
fi
- if [ "$TYPE" = "nfs" ]; then
+ if [ "$FSTYPE" = "nfs" ]; then
if [ "$NFS_SERVER" = "192.168.7.1" -a ! -d "$NFS_DIR" ]; then
- echo "Error: NFS mount point $HDIMAGE doesn't exist"
+ echo "Error: NFS mount point $ROOTFS doesn't exist"
release_lock
return
fi
KERNCMDLINE="root=/dev/nfs nfsroot=$NFS_SERVER:$NFS_DIR,$UNFS_OPTS rw $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
QEMUOPTIONS="$QEMU_NETWORK_CMD -M versatilepb --no-reboot $QEMU_UI_OPTIONS"
fi
- if [ "$MACHINE" = "qemuarmv6" ]; then
- QEMUOPTIONS="$QEMUOPTIONS -cpu arm1136"
- fi
- if [ "$MACHINE" = "qemuarmv7" ]; then
- QEMUOPTIONS="$QEMUOPTIONS -cpu cortex-a8"
- fi
+ if [ "$MACHINE" = "qemuarmv6" ]; then
+ QEMUOPTIONS="$QEMUOPTIONS -cpu arm1136"
+ fi
+ if [ "$MACHINE" = "qemuarmv7" ]; then
+ QEMUOPTIONS="$QEMUOPTIONS -cpu cortex-a8"
+ fi
fi
if [ "$MACHINE" = "qemux86" ]; then
QEMU=qemu
QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS -vga vmware -enable-gl"
- if [ "$TYPE" = "ext3" ]; then
+ if [ "$FSTYPE" = "ext3" ]; then
KERNCMDLINE="vga=0 root=/dev/hda mem=$QEMU_MEMORY $KERNEL_NETWORK_CMD"
- QEMUOPTIONS="$QEMU_NETWORK_CMD -hda $HDIMAGE $QEMU_UI_OPTIONS"
+ QEMUOPTIONS="$QEMU_NETWORK_CMD -hda $ROOTFS $QEMU_UI_OPTIONS"
fi
- if [ "$TYPE" = "nfs" ]; then
+ if [ "$FSTYPE" = "nfs" ]; then
if [ "$NFS_SERVER" = "192.168.7.1" -a ! -d "$NFS_DIR" ]; then
- echo "Error: NFS mount point $HDIMAGE doesn't exist."
+ echo "Error: NFS mount point $ROOTFS doesn't exist."
release_lock
return
fi
if [ "$MACHINE" = "qemux86-64" ]; then
QEMU=qemu-system-x86_64
QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS -vga vmware -enable-gl"
- if [ "$TYPE" = "ext3" ]; then
+ if [ "$FSTYPE" = "ext3" ]; then
KERNCMDLINE="vga=0 root=/dev/hda mem=$QEMU_MEMORY $KERNEL_NETWORK_CMD"
- QEMUOPTIONS="$QEMU_NETWORK_CMD -hda $HDIMAGE $QEMU_UI_OPTIONS"
+ QEMUOPTIONS="$QEMU_NETWORK_CMD -hda $ROOTFS $QEMU_UI_OPTIONS"
fi
- if [ "$TYPE" = "nfs" ]; then
- if [ "x$HDIMAGE" = "x" ]; then
- HDIMAGE=/srv/nfs/qemux86-64
+ if [ "$FSTYPE" = "nfs" ]; then
+ if [ "x$ROOTFS" = "x" ]; then
+ ROOTFS=/srv/nfs/qemux86-64
fi
- if [ ! -d "$HDIMAGE" ]; then
- echo "Error: NFS mount point $HDIMAGE doesn't exist."
+ if [ ! -d "$ROOTFS" ]; then
+ echo "Error: NFS mount point $ROOTFS doesn't exist."
release_lock
return
fi
if [ "$MACHINE" = "spitz" ]; then
QEMU=qemu-system-arm
- if [ "$TYPE" = "ext3" ]; then
- echo $HDIMAGE
- HDIMAGE=`readlink -f $HDIMAGE`
- echo $HDIMAGE
- if [ ! -e "$HDIMAGE.qemudisk" ]; then
+ if [ "$FSTYPE" = "ext3" ]; then
+ echo $ROOTFS
+ ROOTFS=`readlink -f $ROOTFS`
+ echo $ROOTFS
+ if [ ! -e "$ROOTFS.qemudisk" ]; then
echo "Adding a partition table to the ext3 image for use by QEMU, please wait..."
- poky-addptable2image $HDIMAGE $HDIMAGE.qemudisk
+ poky-addptable2image $ROOTFS $ROOTFS.qemudisk
fi
- QEMUOPTIONS="$QEMU_NETWORK_CMD -M spitz -hda $HDIMAGE.qemudisk -portrait"
+ QEMUOPTIONS="$QEMU_NETWORK_CMD -M spitz -hda $ROOTFS.qemudisk -portrait"
fi
fi
if [ "$TYPE" = "ext3" ]; then
#KERNCMDLINE="root=/dev/hda console=ttyS0 console=tty0 $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
KERNCMDLINE="root=/dev/hda console=ttyS0 console=tty $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
- QEMUOPTIONS="$QEMU_NETWORK_CMD -M $MACHINE_SUBTYPE -hda $HDIMAGE -no-reboot $QEMU_UI_OPTIONS"
+ QEMUOPTIONS="$QEMU_NETWORK_CMD -M $MACHINE_SUBTYPE -hda $ROOTFS -no-reboot $QEMU_UI_OPTIONS"
fi
- if [ "$TYPE" = "nfs" ]; then
+ if [ "$FSTYPE" = "nfs" ]; then
if [ "$NFS_SERVER" = "192.168.7.1" -a ! -d "$NFS_DIR" ]; then
- echo "Error: NFS mount point $HDIMAGE doesn't exist"
+ echo "Error: NFS mount point $ROOTFS doesn't exist"
release_lock
return
fi
CPU_SUBTYPE=603e
BIOS=powerpc_rom.bin
QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS -nographic"
- if [ "$TYPE" = "ext3" ]; then
+ if [ "$FSTYPE" = "ext3" ]; then
KERNCMDLINE="root=/dev/hda console=ttyS0 console=tty0 $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
- QEMUOPTIONS="$QEMU_NETWORK_CMD -cpu $CPU_SUBTYPE -M $MACHINE_SUBTYPE -bios $BIOS -hda $HDIMAGE -no-reboot $QEMU_UI_OPTIONS"
+ QEMUOPTIONS="$QEMU_NETWORK_CMD -cpu $CPU_SUBTYPE -M $MACHINE_SUBTYPE -bios $BIOS -hda $ROOTFS -no-reboot $QEMU_UI_OPTIONS"
fi
- if [ "$TYPE" = "nfs" ]; then
+ if [ "$FSTYPE" = "nfs" ]; then
if [ "$NFS_SERVER" = "192.168.7.1" -a ! -d "$NFS_DIR" ]; then
- echo "Error: NFS mount point $HDIMAGE doesn't exist"
+ echo "Error: NFS mount point $ROOTFS doesn't exist"
release_lock
return
fi
if [ "$MACHINE" = "akita" ]; then
QEMU=qemu-system-arm
- if [ "$TYPE" = "jffs2" ]; then
- HDIMAGE=`readlink -f $HDIMAGE`
- if [ ! -e "$HDIMAGE.qemuflash" ]; then
+ if [ "$FSTYPE" = "jffs2" ]; then
+ ROOTFS=`readlink -f $ROOTFS`
+ if [ ! -e "$ROOTFS.qemuflash" ]; then
echo "Converting raw image into flash image format for use by QEMU, please wait..."
- raw2flash.akita < $HDIMAGE > $HDIMAGE.qemuflash
- fi
- QEMUOPTIONS="$QEMU_NETWORK_CMD -M akita -mtdblock $HDIMAGE.qemuflash -portrait"
- fi
-fi
-
-if [ "$MACHINE" = "nokia800" ]; then
- QEMU=qemu-system-arm
- if [ "$TYPE" = "jffs2" ]; then
- HDIMAGE=`readlink -f $HDIMAGE`
- if [ ! -e "$HDIMAGE.qemuflash" ]; then
- echo "'Flashing' rootfs, please wait..."
- poky-nokia800-flashutil $HDIMAGE $HDIMAGE.qemuflash
- fi
- KERNCMDLINE="root=/dev/mtdblock4 rootfstype=jffs2"
- QEMU_NETWORK_CMD="-net nic,model=usb,vlan=0 $QEMU_TAP_CMD"
- QEMUOPTIONS="$QEMU_NETWORK_CMD -M n800 -mtdblock $HDIMAGE.qemuflash -serial vc -m 130 -serial vc -serial vc -serial vc -usb -usbdevice net:0"
- fi
-fi
-
-if [ "$MACHINE" = "nokia800-maemo" ]; then
- QEMU=qemu-system-arm
- if [ "$TYPE" = "jffs2" ]; then
- HDIMAGE=`readlink -f $HDIMAGE`
- if [ ! -e "$HDIMAGE.qemuflash" ]; then
- if [ ! -e "$HDIMAGE.initfs" ]; then
- echo "Error, $HDIMAGE.initfs must exist!"
- release_lock
- return
- fi
- if [ ! -e "$HDIMAGE.config" ]; then
- echo "Error, $HDIMAGE.config must exist!"
- echo "To generate it, take an n800 and cat /dev/mtdblock1 > $HDIMAGE.config"
- release_lock
- return
- fi
- echo "'Flashing' config partition, please wait..."
- poky-nokia800-flashutil $HDIMAGE.config $HDIMAGE.qemuflash config
- echo "'Flashing' initfs, please wait..."
- poky-nokia800-flashutil $HDIMAGE.initfs $HDIMAGE.qemuflash initfs
- echo "'Flashing' rootfs, please wait..."
- poky-nokia800-flashutil $HDIMAGE $HDIMAGE.qemuflash
+ raw2flash.akita < $ROOTFS > $ROOTFS.qemuflash
fi
- KERNCMDLINE=""
- QEMU_NETWORK_CMD="-net nic,model=usb,vlan=0 $QEMU_TAP_CMD"
- QEMUOPTIONS="$QEMU_NETWORK_CMD -M n800 -mtdblock $HDIMAGE.qemuflash -serial vc -m 130 -serial vc -serial vc -serial vc -usb -usbdevice net:0 -show-cursor"
+ QEMUOPTIONS="$QEMU_NETWORK_CMD -M akita -mtdblock $ROOTFS.qemuflash -portrait"
fi
fi
fi
echo "Running $QEMU..."
-echo $QEMUBIN -kernel $ZIMAGE $QEMUOPTIONS $SERIALOPTS $* --append '"'$KERNCMDLINE'"'
-$QEMUBIN -kernel $ZIMAGE $QEMUOPTIONS $SERIALOPTS $* --append "$KERNCMDLINE" || /bin/true
+echo $QEMUBIN -kernel $KERNEL $QEMUOPTIONS $SERIALOPTS $* --append '"'$KERNCMDLINE'"'
+$QEMUBIN -kernel $KERNEL $QEMUOPTIONS $SERIALOPTS $* --append "$KERNCMDLINE" || /bin/true
release_lock
+++ /dev/null
-#!/bin/bash
-
-# Copyright (c) 2010 Intel Corp.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-function usage() {
- echo "Usage: $0 {machine-type} <kernel> <rootfs-dir>"
- echo "Where <rootfs-dir> is a rootfs directory that was created using the poky-extract-sdk utility"
- echo "machine-type is optional if the kernel file is named according to Poky conventions"
-}
-
-if [[ $# -lt 2 || $# -gt 3 ]]; then
- usage
- exit 1
-fi
-
-if [ $# -eq 3 ]; then
- QEMUARCH=$1
- ZIMAGE=$2
- SDK_ROOTFS_DIR=$(cd "$3" && pwd)
-else
- ZIMAGE=$1
- SDK_ROOTFS_DIR=$(cd "$2" && pwd)
-
- QEMUARCH=`basename $ZIMAGE | sed -r -e 's#.*-([a-z]+[0-9]*)-?[0-9]*..*#\1#'`
- if [ -z "$QEMUARCH" ]; then
- echo "Error: Unable to determine machinetype from filename '$ZIMAGE'"
- usage
- exit 1
- fi
-fi
-
-if [ ! -e "$ZIMAGE" ]; then
- echo "Error: kernel file '$ZIMAGE' does not exist"
- usage
- exit 1
-fi
-
-QEMU_INTERNAL_SCRIPT=`which poky-qemu-internal`
-if [ -z "$QEMU_INTERNAL_SCRIPT" ]; then
- echo "Error: Unable to find the poky-qemu-internal script"
- exit 1
-fi
-
-SYSROOT_SETUP_SCRIPT=`which poky-find-native-sysroot`
-if [ -z "$SYSROOT_SETUP_SCRIPT" ]; then
- echo "Error: Unable to find the poky-find-native-sysroot script"
- echo "Did you forget to source your Poky environment script?"
- exit 1
-fi
-. $SYSROOT_SETUP_SCRIPT
-
-PSEUDO_LOCALSTATEDIR=~/.poky-sdk/pseudo
-export PSEUDO_LOCALSTATEDIR
-
-RPC=`which rpcbind`
-if [ "x$RPC" = "x" ]; then
- RPC=`which portmap`
- if [ "x$RPC" = "x" ]; then
- echo "You need rpcbind or portmap installed and running to run the"
- echo "userspace NFS server."
- exit 1
- fi
-fi
-
-rpcbind_running=`ps ax | grep rpcbind | wc -l`
-portmap_running=`ps ax | grep portbind | wc -l`
-if [ rpcbind_running == 1 -a portmap_running == 1 ]; then
- echo "You need to be running either rpcbind or portmap to continue"
- exit 1
-fi
-
-# Start the userspace NFS server
-echo "poky-export-rootfs restart $SDK_ROOTFS_DIR"
-poky-export-rootfs restart $SDK_ROOTFS_DIR
-if [ $? != 0 ]; then
- exit 1
-fi
-
-# Run QEMU
-MACHINE=$QEMUARCH
-TYPE="nfs"
-HDIMAGE=$SDK_ROOTFS_DIR
-CROSSPATH=$POKY_NATIVE_SYSROOT/usr/bin
-. $QEMU_INTERNAL_SCRIPT
-
-# Cleanup
-echo "poky-export-rootfs stop $SDK_ROOTFS_DIR"
-poky-export-rootfs stop $SDK_ROOTFS_DIR
-
-exit 0
