coreutils: Add code to consider musl when selecting charsets
The real issue is in gnulib where it should be fixed
but gnulib gets imported in source into various components
and that may take a while. So lets fix the componnets versions
and as/if they land in new gnulib with a fix we can take
it off.
Change-Id: I63bbcb7bc4d92cb1ec74bb4f4f5109a377060253 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes errors like
|
/home/kraj/work/bleeding/openembedded-core/build/tmp-musl/work/i586-oe-linux-musl/at/3.1.16-r0/at-3.1.16/parsetime.y:264:
undefined reference to `__isleap'
| collect2: error: ld returned 1 exit status
Change-Id: Ie6ec970b12c918de640ba47e090b2f67a3a43f4e Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Mon, 20 Apr 2015 08:05:34 +0000 (01:05 -0700)]
libunwind: use gold for all archs
At least the following boards have build errors without using gold:
qemux86, qemux86-64, qemuarm, qemuaarch64, qemuppc.
The error is:
ld: copy reloc against protected `_Uaarch64_local_addr_space' is invalid
ld: failed to set dynamic section sizes: Bad value
ld: copy reloc against protected `_Uaarch64_local_addr_space' is invalid
ld: failed to set dynamic section sizes: Bad value
| collect2: error: ld returned 1 exit status
So use gold for all archs to fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As of commit 9bb5c7472958aeea46225e835f44d45bea7f7351, the
udev-utils package no longer exists with udev taking ownership
of udevadm. However, systems that had udev-utils installed have
a conflict with udev.
Add RCONFLICTS and RREPLACES variables for udev-utils so udev-utils
will be removed from systems that are upgrading udev. This change
would be applicable for master back through dizzy when the problem
was introduced.
Signed-off-by: Bryan Evenson <bevenson@melinkcorp.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Mon, 20 Apr 2015 13:04:44 +0000 (15:04 +0200)]
image.bbclass: Allow to remove do_rootfs -> virtual/kernel:do_packagedata dependency
* this is causing dependency loops in some cases
e.g. linux-hp-tenderloin depends on initramfs-android-image, but
commit 41f0f86ec0a3e0b6f6c9bb4ef71a4215c00bf66c
Author: Richard Purdie <richard.purdie@linuxfoundation.org>
Date: Tue Jan 27 15:24:52 2015 +0000
Subject: image: Add missing depends on virtual/kernel for depmod data
adds also dependency between <image>.do_rootfs and virtual/kernel:do_packagedata
causing this dependency loop:
initscripts: Remove /etc/volatile.cache on upgrade
/etc/volatile.cache is a cached copy of a script (which is
generated by /etc/init.d/populate-volatile.sh) that generates
the volatile filesystem directories. Since volatile.cache is
a generated file, it is not necessarily changed if
populate-volatile.sh is updated. As a result, the stale script
can add/remove the wrong directories on the next system boot.
If initscripts is being upgraded, make sure volatile.cache gets
deleted.
base-files: Check for /run and /var/lock softlinks on upgrade
Commit ea647cd9eebdc3e3121b84074519c4bb305adac9 moved the locations
of /run and /var/lock to match the FHS 3 draft specifications.
However, the install doesn't remove the existing directories.
As a result, upgrading a system may result in /run as a softlink
to /var/run and /var/run as a softlink to /run, creating a circular
link.
During pre-install, check for the existence of the old softlinks and
remove them so the new directories can be installed.
Ed Bartosh [Fri, 17 Apr 2015 13:19:01 +0000 (16:19 +0300)]
wic: try to find bitbake using find_executable API
Current wic code was assuming that bitbake directory is on the
same level as scripts, which is not the case for oe classic.
Using find_executable bitbake location should be determined better
as this API uss $PATH to search for executables.
Fixes [YOCTO #7621]
Signed-off-by: Ed Bartosh <eduard.bartosh@intel.com> Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Fri, 17 Apr 2015 15:43:08 +0000 (16:43 +0100)]
lib/oe/package_manager: avoid traceback with no packages
If you were using deb packaging, had buildhistory enabled and produced
an SDK that contained no packages in one of the sysroots (such as with
uninative-tarball) then the do_populate_sdk was failing with a python
traceback because there were no fields to split in the output line.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Based on the number of times I've had to explain it over the years it
seems that a lot of new users don't immediately realise what is meant
by "shipped" here (nor should we expect them to) so let's at least
mention packaging and briefly tell the user what they need to do. (I was
going to go into more detail in the message, but there is really more
detail than can be covered succinctly here.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some lsb packages depend on correct lsb-core-ARCH package being
installed (or rather provided) on the target file system. Provide this
package name by main lsb package.
Signed-off-by: Dmitry Eremin-Solenikov <dmitry_eremin@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andre McCurdy [Wed, 15 Apr 2015 02:53:53 +0000 (19:53 -0700)]
busybox: remove CVE-2014-9645 patch (already upstream in 1.23.x)
The CVE-2014-9645 fix was merged in Busybox prior to the 1.23.0
release [1]. The fix was then reworked in Busybox 1.23.1, in such
a way that the original change was no longer required [2].
Although oe-core's CVE-2014-9645 patch still applies cleanly to
Busybox 1.23.1 and 1.23.2, applying it partially reverts the second
version of the upstream fix.
Fixed:
aarch64-poky-linux/4.9.2/ld: copy reloc against protected `_Uaarch64_local_addr_space' is invalid
aarch64-poky-linux/4.9.2/ld: failed to set dynamic section sizes: Bad value
aarch64-poky-linux/4.9.2/ld: copy reloc against protected `_Uaarch64_local_addr_space' is invalid
aarch64-poky-linux/4.9.2/ld: failed to set dynamic section sizes: Bad value
| collect2: error: ld returned 1 exit status
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Robert Yang [Tue, 14 Apr 2015 04:59:49 +0000 (21:59 -0700)]
libepoxy: DEPENDS on virtual/egl and virtual/libx11
Fixed do_configure error:
configure: error: libX11 headers (libx11-dev) required to build with GLX support
and do_compile error:
../include/epoxy/egl_generated.h:10:29: fatal error: EGL/eglplatform.h: No such file or directory
#include "EGL/eglplatform.h"
The dependencies form its README.md:
* automake
* libegl1-mesa-dev
* xutils-dev
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Richard Purdie [Wed, 15 Apr 2015 13:13:22 +0000 (14:13 +0100)]
toolchain-scripts: Allow the CONFIGSITE_CACHE variable to be overridden
In multilib and baremetal configurations, this variable can cause a variety of
problems due to the use of TCLIBC. At least allowing it to be overriden
is a start and allows various configurations to avoid the issue.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Each firmware has their own license, it was a kind of a mess to
leave the license as Proprietary and we got a lot warnings like:
WARNING: The license listed Firmware-atheros_firmware was not in the
licenses collected for linux-firmware
To fix this and make it more clear:
- Fix some incorrect license names.
- Add all license files into common-licenses in previous commit.
- Add all licenses and their md5 values in alphabetical order.
- Add pn-*-license to split up per firmware package and pn-license for others.
- Re-order the codes for each split-out firmware as:
LICENSE_*, FILES_*, RDEPENDS_*
[YOCTO #7539]
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The following patches are rebased.
-- Change-to-calling-bswap_-instead-of-htobe-and-be-toh.patch
-- avoid_parallel_tests.patch
The ptest part of kmod is removed because new version of kmod port all tests to
use modules from module-playground instead of copying prebuilt modules to the
repository. So, we cannot use ptest as before. Remove it so that kmod can build
successfully.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 13 Apr 2015 16:03:42 +0000 (17:03 +0100)]
oeqa: Add test for layer append and FILESPATH tracking
This test actually tests a spectrum of bitbake functionality. Three
layers are created, one containing a recipe, one with a bbappend adding
a file to the recipe and another which overwrites the file in another
bbappend.
The correct outcomes in building the recipe are tested, with the file
in the final layer added, removed and then re-added.
This tests bitbake's cache handling as well as restoration from
sstate which happens in the final test phase.
Based on a test case from:
[YOCTO #7019]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Mon, 6 Apr 2015 17:43:35 +0000 (20:43 +0300)]
wic: use native parted
Used exec_native_cmd instead of find_binary_path to run parted.
Got rid of find_binary_path as it's not used anywhere else.
There are several tools wic is trying to find not only in sysroot,
but also in host root. Parted is a special as on some distros it's
installed in /usr/sbin, which is not in the user's PATH. This makes
wic to fail with error "External command 'parted' not found, exiting."
[YOCTO #7122]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
xserver-xf86-config: Preload graphics driver modules for musl
musl does not support BIND_LAZY intentionally, which means
dlopen will always complain about missing symbols which is what
X does when loading graphics drivers, here we preload the needed
drivers for all emulator machines if libc is musl
Change-Id: I908c94c30db8a5e872922e1a677126d82fa17145 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no reason to build sed for the host, however now:
ERROR: Nothing RPROVIDES 'sed-native' (but virtual:native:/OE/sources/openembedded-core/meta/recipes-extended/groff/groff_1.22.2.bb RDEPENDS on or otherwise requires it)
Signed-off-by: Dmitry Eremin-Solenikov <dmitry_eremin@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Thu, 9 Apr 2015 12:54:35 +0000 (15:54 +0300)]
wic: Use __file__ instead of sys.argv[0]
Using __file__ makes the code work independently of the way
it's loaded. In some cases wic can be imported by another
program without executing it. sys.argv[0] would not contain
path to the wic in such a cases.
This is an enabler for unit testing with nose framework.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds symlink-to-sysroot check to QA_WARN to detect symlinks that
point to locations under TMPDIR, which are most likely broken.
Changes filerdepends from set() to dict(), hence methods for adding
or deleting items had to change too. Now it keeps track of key:value
relationship, flags the QA issue; warning the user about which
file/package causes the problem, making it easier to debug.
[YOCTO #7126]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Thu, 2 Apr 2015 08:55:16 +0000 (01:55 -0700)]
grub-efi: add PACKAGECONFIG for grub-mount and device-mapper
We had PACKAGECONFIGs for grub_2.00 and grub_git, we also need them for
grub-efi, otherwise there might be failures as:
grub-2.00/util/grub-mount.c:37:23: fatal error: fuse/fuse.h: No such file or directory
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Matt Madison [Sat, 4 Apr 2015 18:04:58 +0000 (11:04 -0700)]
shadow: split files needed for PAM use into separate package
The rootfs creator automatically removes shadow for read-only
root filesystems, which breaks use of PAM plugins for login and
other process identity management utilities. Package those programs
and config files separately, so they don't get removed.
Signed-off-by: Matt Madison <matt@madison.systems> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
