Paul Eggleton [Mon, 17 Sep 2012 01:05:15 +0000 (22:05 -0300)]
dhcp: remove dependency of dev/staticdev packages on main package
The main package is empty and is not produced, which leaves the dev
and staticdev packages broken. Remove the dependencies (added in
bitbake.conf by default) to fix this.
Paul Eggleton [Fri, 14 Sep 2012 15:04:43 +0000 (16:04 +0100)]
classes/mirrors: remove bogus gnutls mirror
This mirror entry which maps to itself plus a slash, if matched, put the
fetcher into a circular loop until the stack space is exhausted. A patch
has been sent to fix this issue in BitBake, but we should remove the
bogus entry as well.
(Note that this entry does not actually trigger the issue with current
master because the gnutls recipe now uses GNU_MIRROR instead of
ftp.gnutls.org, thus the bogus mirror entry is not matched.)
sysvinit-inittab_2.88dsf.bb: only run serial checks at boot if we have items to check
Right now, we delay running the serial console checks to we boot up. This causes
issues for read only file systems. So, if have not configured any serial ports to
check via SERIAL_CONSOLES_CHECK we can skip the check at boot. This fixes any
issues with read only file systems and ipk packaging.
Signed-off-by: Matthew McClintock <msm@freescale.com>
Remove /etc since it is empty, when creating a machine that does not
deliver any module config files, the /etc is empty and is then warned
about not being shipped, so we remove it.
This occurs in the routerstationpro with the following warning:
WARNING: For recipe linux-yocto, the following files/directories were installed but not shipped in any package:
WARNING: /etc
Richard Purdie [Tue, 11 Sep 2012 14:22:29 +0000 (15:22 +0100)]
autotools.bbclass: Add functionality to force a clean of ${B} when reconfiguring (and ${S} != ${B})
Unfortunately whilst rerunning configure and make against a project will mostly
work there are situations where it does not correctly do the right thing.
In particular, eglibc and gcc will fail out with errors where settings
do not match a previously built configuration. It could be argued they are
broken but the situation is what it is. There is the possibility of more subtle
errors too.
This patch adds removal of the build directory (${B}) when configure is
rerunning, the sstate checksum for do_configure has changed and ${S} != ${B}.
We could simply use a stamp but saving out the previous configuration checksum
adds some data at no real overhead.
If we find there are things where we want to disable this behaviour with
CONFIGURESTAMPFILE = "" in the recipe, or users could disable it globally.
[YOCTO #2774]
[YOCTO #2848]
This is particularly helpful for eglibc and gcc which use split builds by default and
are a particular source of reconfigure type problems.
eglibc_2.15: make patch only for Freescale machines
It's only Freescale machines that don't imlpement fsqrt, we don't want
this to effect others.
This patch was only added after the last release of denzil, so it's not
present in the release yet. Also, 2.15 is removed from master so it
should only apply to denzil branch
Signed-off-by: Matthew McClintock <msm@freescale.com>
Zhenhua Luo [Wed, 12 Sep 2012 08:20:46 +0000 (16:20 +0800)]
valgrind: fix debug info reading error when do memcheck on ppc targets
following is the error message:
--2263-- WARNING: Serious error when reading debug info
--2263-- When reading debug info from /lib/ld-2.13.so:
--2263-- Can't make sense of .got section mapping
--2263-- WARNING: Serious error when reading debug info
--2263-- When reading debug info from /home/root/lzh:
--2263-- Can't make sense of .data section mapping
--2263-- WARNING: Serious error when reading debug info
--2263-- When reading debug info from /usr/lib/valgrind/vgpreload_core-ppc32-linux.so:
--2263-- Can't make sense of .data section mapping
--2263-- WARNING: Serious error when reading debug info
--2263-- When reading debug info from /usr/lib/valgrind/vgpreload_memcheck-ppc32-linux.so:
--2263-- Can't make sense of .data section mapping
--2263-- WARNING: Serious error when reading debug info
--2263-- When reading debug info from /lib/libc-2.13.so:
--2263-- Can't make sense of .data section mapping
This fixes a case when RPATH embedded in program have one of
its path already relative to ORIGIN. We were losing that path
if such a path existed. This patch appends it to the new edited
rpath being created when we see it.
Khem Raj [Tue, 28 Aug 2012 06:41:48 +0000 (08:41 +0200)]
kernel.bbclass: Dont package kxgettext.o
kxgettext.o is generated when building ppc kernels
so we end up with packaging errors like
> ERROR: QA Issue: Architecture did not match (20 to 62) on
> /work/virtex5-poky-linux/linux-xilinx-2.6.38-r00/packages-split/kernel-dev/usr/src/kernel/scripts/kconfig/kxgettext.o
Bruce Ashfield [Tue, 28 Aug 2012 06:41:47 +0000 (08:41 +0200)]
kernel.bbclass: add non-santized kernel provides
If the kernel version string uses characters or symbols that
need to be santized for the package name, we can end up with a
mismatch between module requirements and what the kernel
provides.
The kernel version is pulled from utsrelease.h, which contains
the exact string that was passed to the kernel build, not
one that is santized, this can result in:
At rootfs assembly time, we'll have a dependency issue with the kernel
providing the santizied string and the modules requiring the utsrelease.h
string.
To not break existing use cases, we can add a second provides to the
kernel packaging with the unsantized version string, and allowing the
kernel module packaging to be unchanged.
Darren Hart [Tue, 28 Aug 2012 06:41:46 +0000 (08:41 +0200)]
kernel: Add kernel headers to kernel-dev package
[YOCTO #1614]
Add the kernel headers to the kernel-dev package. This packages what was
already built and kept in sysroots for building modules with bitbake.
Making this available on the target requires removing some additional
host binaries.
Move the location to /usr/src/kernel
Before use on the target, the user will need to:
# cd /usr/src/kernel
# make scripts
This renders the kernel-misc recipe empty, so remove it.
As we use /usr/src/kernel in several places (and I missed one in the
previous version), add a KERNEL_SRC_DIR variable and use that throughout
the class to avoid update errors in the future.
Now that we package the kernel headers, drop the
kernel_package_preprocess function which removed them from PKGD.
All *-sdk image recipes include dev-pkgs, so the kernel-dev package will
be installed by default on all such images.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Bruce Ashfield <bruce.ashfield@windriver.com> CC: Tom Zanussi <tom.zanussi@intel.com> CC: Khem Raj <raj.khem@gmail.com>
Bruce Ashfield [Tue, 28 Aug 2012 06:41:45 +0000 (08:41 +0200)]
kernel: save $kerndir/tools and $kerndir/lib from pruning
The kernel source tree in the sysroot has all unecessary source
code removed. The existing use case is to support module building
out of the sysroot, but as more toolsa are moved into the kernel
tree itself there are new use cases for the kernel sysroot source.
To avoid putting dependencies on the kernel, and to be able to
individually build and package these tools out of the source tree,
we can save $kerndir/tools and $kernddir/lib from being removed.
This enables tools like perf to be built our of the kernel source
in the sysroot, without significantly increasing the amount of
source in the sysroot.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Tue, 28 Aug 2012 06:41:44 +0000 (08:41 +0200)]
kernel.bbclass: pass KERNEL_VERSION to depmod calls in postinst
* without this, kernel upgrades where KERNEL_VERSION is changed
e.g. 3.4.2 -> 3.4.3 generate .dep for running 3.4.2 and after reboot user ends
up without any module loaded to make it worse after reboot nothing is upgraded
to trigger another kernel(-module) postinst to generate .dep for now running 3.4.3
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Koen Kooi [Tue, 28 Aug 2012 06:41:43 +0000 (08:41 +0200)]
man: make man actually work by installing custom man.config
The default man.conf is named wrong and doesn't work. It references gtbl, while groff installs tbl and other things. This man.conf is imported from OE classic and runtime tested on angstrom.
Before:
root@beaglebone:~# man man
sh: /usr/bin/gtbl: No such file or directory
sh: line 0: echo: write error: Broken pipe
gunzip: write: Broken pipe
gunzip: error inflating
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
After:
root@beaglebone:~# man man
MAN(1) Manual pager utils MAN(1)
NAME
man - an interface to the on-line reference manuals
Martin Jansa [Tue, 31 Jul 2012 02:00:01 +0000 (04:00 +0200)]
package.bbclass: fix TypeError in runstrip
* some packages have .ko files which are not elf, without this change
it fails with TypeError, with this change only runstip fails and
reports where:
ERROR: runstrip: ''arm-oe-linux-gnueabi-strip' '/OE/shr-core/tmp-eglibc/work/armv4t-oe-linux-gnueabi/emacs-23.4-r0/package/usr/share/emacs/23.4/etc/tutorials/TUTORIAL.ko'' strip command failed
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 24 Aug 2012 16:12:39 +0000 (16:12 +0000)]
distutils/steuptools: Fix files layout and unbreak builds
The last two distutils changes progressivly broke the builds. Firstly they
moved things from the site_packages directory to being higher up the tree
which introduced package QA warnings as a side effect. Secondly, it interacts
badly with setuptools which passes in --root=${D} itself.
This patch restores the original directory layout, hence fixing the QA
warnings and also passes extra options to setuptools to deal with the
--root option it passes.
distutils.bblass: change order of args to install step
This let's the user override install-lib argument again if it needs
to be something else, otherwise things like python-setuptools
won't be able to modify the install-lib dir
This fixes a new issue exposed by my previous distutils patch
that fixed the python modules default install location
Signed-off-by: Matthew McClintock <msm@freescale.com>
Bruce Ashfield [Wed, 22 Aug 2012 05:18:05 +0000 (01:18 -0400)]
kernel-yocto: set master branch to a defined SRCREV
To support custom repositories that set a SRCREV and that only have
a single master branch, do_validate_branches needs a special case
for 'master'. We can't delete and recreate the branch, since you
cannot delete the current branch, instead we must reset the branch
to the proper SRCREV.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Thu, 2 Aug 2012 18:12:33 +0000 (14:12 -0400)]
linux-yocto: allow do_validate_branches to handle all branches
Branch validation will not restrict a branch that doesn't exist
in the tree at the time of validation (since you can't reset a
SRCREV on a non-existent branch). This restriction can be removed
by looking for all branches that contain the specified SRCREV
and forcing them to that value.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Jeff Polk [Wed, 27 Jun 2012 16:57:50 +0000 (10:57 -0600)]
recipes-core/eglibc-2.13: Patch for locale-base-tt-ru packaging
The eglibc-2.13 build can fail because locale-base-tt-ru is in
PACKAGES twice. This is because the SUPPORTED list and the i18n
directories are out of sync with each other; the SUPPORTED list
expects a directory named "tt_RU.UTF8", but the directory is
actually named "tt_RU", and likewise for the @iqtelif variants.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Jeff Polk <jeff.polk@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
This drops one patch against eglibc for 2.15 and adds two new ones,
also it adds a gcc patch. We use all of these internally and they
are tested quite well.
Signed-off-by: Matthew McClintock <msm@freescale.com>
libpam: disable NIS to not link with libtirpc when it is available
I was checking ways to make incremental builds faster so I started using
sstate-cache and SSTATE_MIRRORS. But this gave me some nasty bug:
| Collected errors:
| * satisfy_dependencies_for: Cannot satisfy the following dependencies
for php-cgi:
| * libtirpc1 (>= 0.2.2) *
| * opkg_install_cmd: Cannot install package php-cgi.
I checked details:
In my previous build libtirpc got built before libpam so libpam found it
and linked. As a result packages depend on libtirpc1 but as there is no
such build dependency sstate handling code did not used libtirpc copy...
Paul Eggleton [Thu, 5 Jul 2012 14:48:23 +0000 (15:48 +0100)]
classes/license: fix manifest to work with deb
Prepend the license manifest creation call to ROOTFS_POSTPROCESS_COMMAND
instead of appending to ROOTFS_POSTINSTALL_COMMAND. The latter is not
implemented for the deb backend (and probably ought to just be removed
completely), and by using _prepend we can still ensure it occurs before
package info is removed (and before buildhistory in case it is needed
there in future).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
If a + character appears in a version specification within the list of
package dependencies, the version will not be removed from the list in
list_package_depends/recommends leading to garbage appearing in the
dependency graphs generated by buildhistory. To avoid any future
problems due to unusual characters appearing in versions, change the
regex to match almost any character.
Fixes [YOCTO #2451].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold [Wed, 8 Aug 2012 08:56:24 +0000 (11:56 +0300)]
foomatic: fix perl path for target
This problem appears on F17 when configure finds /bin/perl, since the beh
script is a target side script, we need to set PERL in the do_configure_prepend
in order for the correct perl to be used
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reworked commit to fix merge conflicts with denzil branch.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Otavio Salvador [Mon, 23 Jul 2012 17:37:17 +0000 (14:37 -0300)]
shadow: use 'users' group by default
The rootfs has 'users' group at number 100 and without this fix it
would assign to a non-existent group and if a group with gid as 1000
is created later it would own all files for users created.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Reworked commit to fix merge conflicts with denzil branch.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Otavio Salvador [Mon, 23 Jul 2012 17:37:16 +0000 (14:37 -0300)]
shadow-native: use 'users' group by default
The rootfs has 'users' group at number 100 and without this fix it
would assign to a non-existent group and if a group with gid as 1000
is created later it would own all files for users created.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Reworked commit to fix merge conflicts with denzil branch.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
u-boot.inc: update linker arguments to pass --sysroot arg
If we are building from sstate-cache it's possible to be building
from another folder on another machine, therefore the linker requires
that a proper --sysroot is passed too it so it can find things like
libgcc.a and avoid errors such as:
Enrico Scholz [Sun, 20 May 2012 17:54:37 +0000 (19:54 +0200)]
libtool: fixed parallel build related race
While building libtool, the libtool script itself will be regenerated
because OE modifies a dependency[1]. With -jX, this operation (-->
removal, creation of non-x file, 'chmod a+x') can happen at a time when
the script is going to be executed. This can cause errors like:
I am not sure whether the custom do_compile_prepend() is still needed.
For now only the issue above will be fixed by executing ./config.status
yet again.
Saul Wold [Thu, 7 Jun 2012 12:00:00 +0000 (05:00 -0700)]
curl: enable ssl support
This patch enables ssl support for curl to allow git to clone from
https / ssl sites. We do not want to enable gnutls for native or
nativesdk, as it adds additional dependency and increase build time
Martin Donnelly [Tue, 10 Jan 2012 13:32:04 +0000 (13:32 +0000)]
augeas: Add libxml2 dependency
This patch fixes the following Augeas configure error.
| checking for LIBXML... no
| configure: error: Package requirements (libxml-2.0) were not met:
|
| No package 'libxml-2.0' found
|
| Consider adjusting the PKG_CONFIG_PATH environment variable if you
| installed software in a non-standard prefix.
|
| Alternatively, you may set the environment variables LIBXML_CFLAGS
| and LIBXML_LIBS to avoid the need to call pkg-config.
| See the pkg-config man page for more details.
| ERROR: oe_runconf failed
Signed-off-by: Martin Donnelly <martin.donnelly@ge.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ting Liu [Fri, 13 Jul 2012 05:14:25 +0000 (00:14 -0500)]
lsof: define linux C library type when using eglibc
lsof tries to compile a temp c source file and execute the binary to
determine linux C library type (file Configure, line 2689-2717).
It is inpracticable for cross-compilation and may have build issue on
some distros since it depends on host settings.
Fix below error when building for 64bit target on 64bit host:
[...]
| dsock.c:481:44: error: 'TCP_LISTEN' undeclared (first use in this function)
| dsock.c:482:45: error: 'TCP_CLOSING' undeclared (first use in this function)
[...]
| make: *** [dsock.o] Error 1
The actual issue exists in do_configure:
[...]
Testing C library type with cc ... done
Cannot determine C library type; assuming it is not glibc.
Which is in turn caused by missing 'gnu/stubs-32.h" when compiling
the temp c source file on host:
[...]
fatal error: gnu/stubs-32.h: No such file or directory compilation terminated.
file gnu/stubs-32.h is provided by 32bit glibc.
Signed-off-by: Ting Liu <b28495@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sysvinit-inittab_2.88dsf.bb: Allow multiple serial port consoles to be defined
Set SERIAL_CONSOLES if you want to define multiple serial consoles, also if
you need to check for the presence of the serial consoles you can also define
SERIAL_CONSOLES_CHECK to determine if these are present when you boot. This
will prevent error message that pop up when the serial port is not present.
gcc: gcc-cross-canadian: use correct location for libraries for powerpc64
This fixes the issue where gcc invokes the linker with an incorrect -L
library location and gives up because it can't find libraries. It was
looking in a /lib folder instead of /lib64
Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libxml-parser-perl_2.41.bb: fix MakeMaker issues with using wrong CC/LD/etc
MakeMaker has a bug where it does not propagate CC/LD/etc information
down to subproject it generates Makefiles for... this recipe has has an
Expat subproject which has issues building if we are using sstate-cache
and it will reference the old sysroots and be unable to build properly.
There is an upstream MakeMaker bug for this issue but we can work around
it by fixing up the Makefiles for now
Zhenhua Luo [Tue, 26 Jun 2012 03:53:16 +0000 (11:53 +0800)]
linux-dtb: add multi-dtb build support
including following enhancement:
* support multi-dtb build
* skip dtb build and install when KERNEL_DEVICETREE is empty
* print a warning message when specified dts file is not available
Ross Burton [Tue, 26 Jun 2012 10:10:23 +0000 (11:10 +0100)]
gconf.bbclass: don't register schemas in the install stage
Previously this was installing schemas in the sysroot, which is wrong for native
packages as nothing should touch the sysroot directly, and even more wrong for
non-native packages as the sysroot is irrelevant.
So, export the environment variable that stops the registration happening at
install time. The postinst script will handle the non-native case, and for the
sysroot I've opened #2648. This isn't a massive problem as nothing to my
knowledge actually installs schemas to the sysroot.
[YOCTO #2245]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Bruce Ashfield [Thu, 7 Jun 2012 19:59:43 +0000 (15:59 -0400)]
linux-yocto/3.2: update to v3.2.18
Updating the 3.2 kernel SRCREVs to pickup the -stable update
to v3.2.18.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reworked commit to fix merge conflicts with denzil branch.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Bruce Ashfield [Fri, 18 May 2012 14:18:17 +0000 (17:18 +0300)]
linux-yocto: policy cleanups
Updating the meta SRCREVs to pickup configuration policy cleanups:
49f931b meta/fishriver: remove redundant features and options 51a6d3f meta/emenlow: remove redundant features and options 101dd7f meta/crownbay: remove redundant features and options 4110ecd meta/sugarbay: remove redundant features and options 0f1304a meta/jasperforest: remove redundant features and options 0a56a3b meta/common-pc-64: factor out SCSI CDROM option b71938a meta/common-pc-64: use usb-mass-storage feature 0724f40 meta: add scsi cdrom feature 438bca8 meta/common-pc: use usb-mass-storage feature c970881 meta: factor out SCSI options from the usb-mass-storage feature 4c8135e meta: add scsi disk feature 6872a81 meta: add scsi feature e706ec5 meta/sugarbay: factor out policy-related options 8b7fbc2 meta/jasperforest: factor out policy-related options fea1b0e meta/fishriver: factor out policy-related options 13bf9ab meta/emenlow: factor out policy-related options 4748d50 meta/crownbay: factor out policy-related options 44f592f meta/common-pc-64: factor out policy-related options 5a3f5c7 meta/common-pc: factor out policy-related options 1f5a10b meta/common-pc-64: use usb features 4b87723 meta/common-pc: use usb features 594ba05 meta: add ROOT_HUB_TT config option to the usb/ehci-hcd feature
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 18 May 2012 14:18:15 +0000 (17:18 +0300)]
linux-yocto: intel BSP config changes
Updating the meta SRCREV for the following fixes:
1dfd60f meta/fishriver: move smp options from recipe-space 012780a meta/emenlow: move smp options from recipe-space b59b1a5 meta/crownbay: move smp options from recipe-space 74dc6ac meta/sugarbay: remove boot-live options a4bedcb meta/jasperforest: remove boot-live options 4ae7b81 meta/sugarbay: use usb features 30e7e8c meta/jasperforest: use usb features 22d0c5d meta/fishriver: use usb features e262965 meta/emenlow: use usb features
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 4 May 2012 14:40:34 +0000 (10:40 -0400)]
linux-yocto/3.2: configuration and pch merge
Updating the 3.2 SRCREVs to import the following meta/config
changes:
6b3d4e0 meta: add mei feature 519abac meta: add usb/uhci-hcd feature a67c5a3 meta/crownbay: use usb features 0855066 meta: add usb/ohci-hcd feature 15f1a99 meta: add usb/ehci-hcd feature 8fa6408 meta: add usb/xhci-hcd feature c724a55 meta: add usb/base feature b55b3a1 sys940x: Cleanup sys940x.scc 93f2e97 sys940x: Use PHYSICAL_START of 0x200000 to boot aaa034b sys940x: Add common standard and preempt-rt features e2b1286 sys940x: Add efi-ext to standard and preempt-rt configs d188c21 sys940x: Move emgd-1.10 data to the standard scc file 72d9369 fri2: Cleanup fri2-$KTYPE.scc files re efi-ext.scc dbcb120 fri2: Use emgd-1.10 feature and branch
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Saul Wold [Wed, 13 Jun 2012 23:39:49 +0000 (16:39 -0700)]
eglibc: added ac_cv_path_ to CACHED_CONFIGUREVARS
On Fedora 17, bash has moved to /usr/bin/bash and the configure process finds it
on the host machine there, this ensures that it is set correctly for the target.
[YOCTO #2363]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Reworked commit to fix merge conflicts with denzil branch.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Saul Wold [Wed, 13 Jun 2012 23:39:24 +0000 (16:39 -0700)]
quilt: added ac_cv_path_BASH to CACHED_CONFIGUREVARS
On Fedora 17, bash has moved to /usr/bin/bash and the configure process finds it
on the host machine there, this ensures that it is set correctly for the target.
[YOCTO #2363]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Reworked commit to fix merge conflicts with denzil branch.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Gary Thomas [Tue, 12 Jun 2012 11:39:43 +0000 (05:39 -0600)]
webkit-gtk: Apply work around for all PowerPC targets
The current patch for bug #1570 only applies to qemuppc but should be
applicable for all PowerPC targets. Also update the patch so that
only one language backend, either ICU or PANGO, is built.
Also remove some old customizations (dependencies on darwin) as these
should now be handled in a layer specific .bbappend file.
Richard Purdie [Tue, 12 Jun 2012 13:05:09 +0000 (13:05 +0000)]
openjade-native: Ensure we reautoconf the package
Currently since configure.in in is in a subdirectory, we don't reautoconf the
recipe. We really need to do this, to update things like the libtool script used
and fix various issues such as those that could creep in if a reautoconf is
triggered for some reason. Since this source only calls AM_INIT_AUTOMAKE to gain the
PACKAGE and VERSION definitions and that macro now errors if Makefile.am doesn't
exist, we need to add these definitions manually.
These changes avoid failures like:
----
| ...
| DssslApp.cxx:117:36: error: 'PACKAGE' was not declared in this scope
| DssslApp.cxx:118:36: error: 'VERSION' was not declared in this scope
| make[2]: *** [DssslApp.lo] Error 1
----
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't want git status reporting on patches lying in the top
level dir in this case.
Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joe Slater [Thu, 7 Jun 2012 23:37:00 +0000 (16:37 -0700)]
shared-mime-info: fix build race condition
The definition of install-data-hook in Makefile.am leads
to multiple, overlapping, executions of the install-binPROGRAMS
target. We modify the definition to avoid that.
Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Song.Li [Thu, 7 Jun 2012 23:36:58 +0000 (16:36 -0700)]
groff: Fix build on Fedora 17
Generally distros keep perl at /usr/bin/perl
But Fedora 17 also has /bin/perl,
this causes groff_1.20.1 build to put perl
interpreter path as /bin/perl
But we set perl location for target as /usr/bin/perl
This mismatch of perl path causes failure of rootfs image creation
like this:
| error: Failed dependencies:
| bin/perl is needed by groff-1.20.1-r1.ppc603e
Signed-off-by: Song.Li <song.li@windriver.com>
Sync up with the do_install_append_virtclass-native chunk.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Garman [Thu, 7 Jun 2012 23:36:56 +0000 (16:36 -0700)]
runqemu-ifup: enable arp proxying
This allows core-image-sato to access the WAN.
Thanks to Dexuan Cui for proposing this fix.
Fixes [YOCTO #2329]
Signed-off-by: Scott Garman <scott.a.garman@intel.com> Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Thu, 7 Jun 2012 23:36:55 +0000 (16:36 -0700)]
gnupg: disable CCID driver
The CCID driver driver is apparently unnecessary, so disable it.
Also remove the associated libusb dependency, since that won't be
needed either.
According to Scott Garman <scott.a.garman@intel.com>:
I'd just note that the CCID smartcard reader is a specific piece of
hardware that is unlikely to be used in a majority of our use cases.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Resolved merge conflicts when importing from oe-core master.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Tom Zanussi [Thu, 7 Jun 2012 23:36:54 +0000 (16:36 -0700)]
gnupg: add libusb to DEPENDS
gnupg apparently depends on libusb:
| error: Failed dependencies:
| libusb-0.1-4 >= 0.1.3 is needed by gnupg-2.0.18-r1.core2
So add libusb to gnupg DEPENDS.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Resolved merge conflicts when importing from oe-core master.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Zhai Edwin [Wed, 30 May 2012 09:08:28 +0000 (17:08 +0800)]
webkit-gtk: Use glib as unicode backend to avoid browser crash
webkit-gtk depends on ICU for the unicode, but ICU is not safe when build and
target system owns different endian. ICU's community is not responsive to make
a patch for this, so glib is used as work around here.
[YOCTO #1570] got fixed
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 28 May 2012 17:10:50 +0000 (18:10 +0100)]
classes/sanity: send sanity check failure as a separate event for Hob
In order to show a friendlier error message within Hob that does not
bury the actual sanity error in our typical preamble about disabling
sanity checks, use a separate event to indicate that sanity checks
failed.
This change is intended to work together with the related change to
BitBake, however it has a check to ensure that it does not fail with
older versions that do not include that change.
Fixes [YOCTO #2336].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joshua Lock [Wed, 23 May 2012 22:16:19 +0000 (15:16 -0700)]
sanity.bbclass: copy the data store and finalise before running checks
At the ConfigParsed event the datastore has yet to be finalised and thus
appends and overrides have not been set.
To ensure the sanity check is being run against the configuration values
the user has set call finalize() on a copy of the datastore and pass that
for all sanity checks.
Richard Purdie [Fri, 11 May 2012 14:16:07 +0000 (14:16 +0000)]
image.bbclass: Ensure ${S} is cleaned at the start of rootfs generation
Some image classes such as bootimg save files into ${S} as part of rootfs
generation. For correctness we should therefore clean this at the start of
image generation to ensure reproducibility.
I found this issue when some files I thought should disappear from my rootfs
would not disappear.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mihai Lindner [Sun, 20 May 2012 13:17:32 +0000 (13:17 +0000)]
sudo: fixed wrong `chmod` path
Placed $D between braces ${D} to be correctly expanded to the
workdir path, instead of a path relative to host rootfs.
Currently, bitbake sudo fails on host systems where sudo is not
installed.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Richard Purdie [Thu, 24 May 2012 10:02:53 +0000 (11:02 +0100)]
bitbake.conf: Improve wget timeouts
The wget default is a 900 second timeout and 20 retries. This is way too long
for most of our usecases so this patch changes it to a 30 second timeout and
reduces retries from 5 to 2. We have good mirror infrastructure, this will
let us fall back to it easier.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Xiaofeng Yan [Mon, 21 May 2012 06:59:22 +0000 (14:59 +0800)]
ncurses: Avoid occasional builling failure when having parallel processable task
ncurses failure non-gplv3 build (race issue) like the following \
error information:
| tic: error while loading shared libraries: /srv/home/pokybuild \
/yocto-autobuilder/yocto-slave/nightly-non-gpl3/build/build/tmp/\
work/x86_64-linux/ncurses-native-5.9-r8.1/ncurses-5.9/narrowc/lib\
/libtinfo.so.5: file too short
| ? tic could not build /srv/home/pokybuild/yocto-autobuilder/\
yocto-slave/nightly-non-gpl3/build/build/tmp/work/x86_64-linux/\
ncurses-native-5.9-r8.1/image/srv/home/pokybuild/yocto-autobuilder\
/yocto-slave/nightly-non-gpl3/build/build/tmp/sysroots/x86_64-linux\
/usr/share/terminfo
| make[1]: *** [install.data] Error 1
This is a race issue which is caused by
install.libs and install.data:
1) install.data needs run tic
2) tic needs libtinfo.so
3) install.libs would regenerate libtinfo.so
4) but install.data doesn't depend on install.libs, and they can run
parallelly
So there would be errors in a very critical condition: tic is begining
to run at the same time when install.libs is generating libtinfo.so, and
this libtinfo.so is not integrity, then there would be the above error.
Let task install.libs run before install.data for fixing this bug.
[YOCTO #2298]
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Robert Yang [Wed, 23 May 2012 05:55:39 +0000 (13:55 +0800)]
rpm 5.4.0: respect to the arch when choose the alternatives
There is a bug if we:
1) bitbake diffutils with MACHINE=crownbay
2) bitbake diffutils with MACHINE=qemux86
3) bitbake core-image-sato with MACHINE=crownbay
Then the diffutils.i586 would be installed to the crownbay's image, this
is because diffutils.i586 is newer than diffutils.core2, and rpm doesn't
respect to the arch priorities:
Fix rpm to respect to the order, for example, if it finds a pkg in both
core2/ and i586/, and the core2/ comes first, it should not use the one
in i586/ even if it's build time is newer.
Note: Don't worry about the _free(*ptr), it can check whether ptr is
NULL or not.
This is for the denzil branch, and the master branch also needs it.
[YOCTO #2360]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
