Anders Darander [Mon, 13 Jun 2011 17:26:16 +0000 (19:26 +0200)]
runqemu: take TMPDIR from bitbake
The old standard of using /home/anders/openembedded-core/build/tmp as TMPDIR do not work any longer,
as - is appended to the real TMPDIR. Thus, always take TMPDIR from
bitbake, unless TMPDIR is set in the environment.
Signed-off-by: Anders Darander <anders@chargestorm.se>
Khem Raj [Mon, 13 Jun 2011 06:05:16 +0000 (23:05 -0700)]
eglibc 2.12/2.13: Upgrade SRCREV
We need http://www.eglibc.org/archives/patches/msg00923.html
to get through the problem we see when OPTION_EGLIBC_RTLD_DEBUG
is disabled. This patch has been backported to both 2.12 and 2.13
branches. We bump SRCREVs to have that change.
Kang Kai [Tue, 7 Jun 2011 08:29:41 +0000 (16:29 +0800)]
ghostscript: update SRC_URI
Build ghostscript-native fails on a i686 machine because it can't get
the source objarch.h and soobjarch.h, and .h files are not needed for
native package, so update the SRC_URI to fix it.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Removed the do_configure_prepend and folded into the target do_configure
since the native was picking it up for the do_configure_virtclass/native()
and then failing on i686.
Dexuan Cui [Fri, 10 Jun 2011 07:25:19 +0000 (15:25 +0800)]
git: restore the dependency on perl-native
[YOCTO #1155]
I thought git-native could depend on perl-native-runtime and tests on
Ubuntu 9.04/10.10 and Fedora 13 show it could buid fine (looks these distros
install perl-ExtUtils-MakeMaker by default).
However Joshua reported on Fedora 15 i686 host, git-native can't build unless
he manually installed perl-ExtUtils-MakeMaker to the host.
This makes me think we may as well make git-native depend on perl-native.
Bruce Ashfield [Wed, 8 Jun 2011 19:33:02 +0000 (15:33 -0400)]
linux-yocto: rename recipes to explicitly indicate version
The existing recipe names for the linux-yocto kernel builds
worked well when there was a single, or two versions of the
kernel available. But with the impending kernel updates and
retirement of older kernels, the re-use of the same recipes
for different kernel versions violates the principle of least
surprise.
To address this, the recipes are being renamed as follows:
Phil Blundell [Fri, 3 Jun 2011 19:55:33 +0000 (19:55 +0000)]
uclibc: remove PACKAGE_ARCH
There is no good reason for uclibc to be machine specific. Remove local
assignment to PACKAGE_ARCH so that it gets the default target
architecture and bump PR for that change.
See http://lists.linuxtogo.org/pipermail/openembedded-core/2011-May/003064.html
Phil Blundell [Fri, 10 Jun 2011 22:01:40 +0000 (22:01 +0000)]
uclibc: remove redundant python code
This chunk of python code has been around for a while (witness the
comment about gcc 3.4.0) and predates the availability of
COMPATIBLE_HOST. Rewrite it using a more modern idiom.
Dexuan Cui [Mon, 13 Jun 2011 13:24:14 +0000 (21:24 +0800)]
pixman: upgrade from 0.20.2 to the latest stable 0.22.0
Update LIC_FILES_CHKSUM:
1) COPYING: only format change; no actual license change.
2) 0.22.0 doesn't have pixman-x64-mmx-emulation.h, so let's remove it.
For some test I need to back to use gcc-4.5, so I changed GCCVERSION and
SDKGCCVERSION to "4.5.1", but I found gcc-cross-canadian's 4.6.0, rather
than 4.5.1, would be built! Finally I made this patch to fix the issue.
Richard Purdie [Mon, 13 Jun 2011 13:36:12 +0000 (14:36 +0100)]
nativesdk.bbclass: Correct ordering of manipulations
OVERDIDES is the key variable that needs to be set prior to data finalisation.
The other variables should be manipulated after finalisation so any
DEPENDS_prepend and _append are accounted for. This patch ensures this is
the case.
The PACKAGES maniupulations are not enabled at this time as they
don't function 100% correctly yet.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change clearly breaks builds since subsequent patches
depend on changes this patch removes. Not sure what's going
on here but this change isn't correct.
Mark Hatle [Thu, 9 Jun 2011 17:06:44 +0000 (12:06 -0500)]
pseudo: Fix problem related to realpath
When pseudo is disabled, certain programs that call realpath may not
work properly. This was discovered when using the Qt MOC tool when
certain qmake project features are used.
[YOCTO #1150]
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Phil Blundell [Thu, 9 Jun 2011 11:58:43 +0000 (12:58 +0100)]
kexec-tools: don't depend on virtual/kernel
There doesn't appear to be any terribly good reason for kexec-tools to
depend on the kernel. (I verified that kexec-tools is buildable in a
clean TMPDIR without having previously built virtual/kernel.)
Having this dependency in place is a nuisance because it makes it
awkward to put kexec into an initramfs. So, it seems like we would be
better off without.
Signed-off-by: Phil Blundell <philb@gnu.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Wed, 8 Jun 2011 13:20:25 +0000 (14:20 +0100)]
iproute2: update to 2.6.38
Fixes "ip route get" not producing any output (a regression in 2.6.35).
See http://marc.info/?l=linux-netdev&m=129442470405398&w=2 and
http://marc.info/?l=linux-netdev&m=130038222321440&w=2 for a list of
other changes since 2.6.35.
Fixes [YOCTO #1006] (reopened)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Mark Hatle [Thu, 2 Jun 2011 22:15:26 +0000 (17:15 -0500)]
pseudo: Update pseudo to 1.1.1 version
Update both the core and pseudo_git packages to the latest 1.1.1 verison.
This fixes an issues where the call system() was not wrapped. This could
lead to issues where certain spawned commands broke out of a pseudo-chroot
and created files in the wrong place.
Also the update the 1.0 -> 1.1.1 adds additional capabilities such as
beginning support for MacOS X.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Tom Zanussi [Wed, 8 Jun 2011 13:48:11 +0000 (08:48 -0500)]
initramfs-live-install: comment out allarch inherit to resolve no provider
initramfs-live-install is only compatible with i.86|x86_64 so
shouldn't inherit 'allarch'. This comments it out.
More specifically, commit 52295fa3deef3b0374b99829626d524cefae6001
(Improve handling of 'all' architecture recipes and their interaction
with sstate) sets TARGET_ARCH which due to the COMPATIBLE_HOST setting
in the recipe causes it to be skipped and gives the following error
for any -live build:
NOTE: Resolving any missing task queue dependencies
NOTE: Runtime target 'initramfs-live-install' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['initramfs-live-install']
ERROR: Required build target 'core-image-sato-live' has no buildable providers.
Missing or unbuildable dependency chain was: ['core-image-sato-live', 'core-ima\
ge-minimal-initramfs', 'initramfs-live-install']
ERROR: Nothing RPROVIDES 'initramfs-live-install'
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Commented out with explaination instead of remove
Bruce Ashfield [Mon, 6 Jun 2011 15:30:31 +0000 (11:30 -0400)]
linux-yocto: make e1000e structure common [commit: bec3f1e8c]
During work on 1.1 BSPs, some driver options changed. The
result was that the upstream fix b1d670f10e8078485884f0cf7e384d890909aeaa
needs to be available for all BSPs.
These SRCREV updates are the result of making that commit common.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Fri, 3 Jun 2011 05:05:30 +0000 (01:05 -0400)]
linux-yocto: update target/meta SRCREVs
This SRCREV update picks up the following changes from the
2.6.37 kernel tree:
- fishriver: create and use a dedicated BSP branch
- fishriver: usbnet fixes, but common to all boards
- standard: update omap baseline match the 2.6.34
upstream merge content
Built and boot tested on qemu*
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
