Changqing Li [Wed, 8 May 2019 10:05:27 +0000 (18:05 +0800)]
python3: fix do_install fail for parallel buiild
When using make -j with the 'install' target, it's possible for altbininstall
(which normally creates BINDIR) and libainstall (which doesn't, though it
installs python-config there) to race, resulting in a failure due to
attempting to install python-config into a nonexistent BINDIR. Ensure it also
exists in the libainstall target.
Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joshua Watt [Wed, 8 May 2019 16:16:23 +0000 (11:16 -0500)]
resulttool: Add option to dump all ptest logs
Adds an option to dump all the ptest logs to individual files in a
specified directory. If multiple test runs are present, the
'--prepend-run' argument will create separate directories for each test
run under the target directory and put the logs there to prevent each
test run from clobbering the others.
[YOCTO #13331]
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 8 May 2019 10:50:14 +0000 (11:50 +0100)]
scripts/pybootchart/draw: Fix some bounding problems
The chart size extents were being incorrectly reported, not accounting for the
width of the legend. Set a minimum width to account for that (its fixed size).
Also stop printing the chart background off the bottom of the chart extents.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 8 May 2019 10:48:35 +0000 (11:48 +0100)]
scripts/pybootchart: Port to python3
This updates the pybootchart code (used for viewing build timing profiles)
to use python3. The bulk of the changes are to use gi instead of pygtk, i.e.
port from gtk+2 to gtk+3.
The main change is to make the bootchart widget inherit gtk.Scrollable
and change the way the scrollbars are implemented to match the new method
upstream. The drawing code used cairo already so can remain unchanged,
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hongxu Jia [Mon, 6 May 2019 02:37:27 +0000 (10:37 +0800)]
acpica: use update-alternatives for acpidump
acpidump is both provided by acpica and pmtools, so use
update-alternatives to fix conflicts:
...
|Error: Transaction check error:
| file /usr/bin/acpidump conflicts between attempted installs of
pmtools-20130209+git0+3ebe0e54c5-r0.i586 and acpica-20190405-r0.i586
...
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Mon, 6 May 2019 17:51:36 +0000 (10:51 -0700)]
gcc-target: Do not set --with-sysroot and gxx-include-dir paths
These options are not needed on target infact since the defaults would
be good enough for compiler to find the relevant headers and libraries
from compiler runtime
with gcc9 it starts to strip the sysroot from gxx-include-dir which
means it tries to look for gxx headers in localdir
Whenever cml1 do_configure is used with a defconfig, oldconfig waits for
input. This silently fails on recent kconfig projects with:
"Error in reading or end of file."
We cannot use a more up to date kconfig target such as olddefconfig,
because busybox does not support it.
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Douglas Royds [Mon, 6 May 2019 06:47:25 +0000 (18:47 +1200)]
distutils: Run python from the PATH in the -native case as well
The python distutils generate a python wrapper script for each package,
containing shebang lines pointing to the python executable.
In our case, this is a fully-qualified path to python-native in the
recipe-sysroot-native.
Ubuntu 18.04 restricts the useful length of the shebang line to 125
characters, and Ubuntu 16.04 restricts it to 77. In both cases, the
staged python script fails to run due to the length of the path to
the python-native executable.
Replace the shebang line with nativepython or nativepython3 as appropriate.
The nativepython symlink is installed by the python-native recipe:
#!/usr/bin/env nativepython
We were already doing this for on-target distutils components.
This change applies the sed-line to -native distutils components as well.
In this way, -native clients of these components can invoke the wrapper scripts
directly, without themselves needing to inherit pythonnative.
This works around a known setuptools issue:
https://github.com/pypa/setuptools/issues/494
Even once this issue has been resolved upstream,
we will still need to replace `python` with `nativepython`
Signed-off-by: Douglas Royds <douglas.royds@taitradio.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Alex Kiernan [Sun, 5 May 2019 05:24:27 +0000 (06:24 +0100)]
recipetool: fix unbound variable when fixed SRCREV can't be found
If attempting to find a fixed SRCREV fails because the directory doesn't exit,
avoid failing with:
Traceback (most recent call last):
File "/home/vagrant/poky/scripts/recipetool", line 121, in <module>
ret = main()
File "/home/vagrant/poky/scripts/recipetool", line 110, in main
ret = args.func(args)
File "/home/vagrant/poky/scripts/lib/recipetool/create.py", line 707, in create_recipe
srcrev = stdout.rstrip()
UnboundLocalError: local variable 'stdout' referenced before assignment
Fixes: 000480c42797 ("recipetool / devtool: set a fixed SRCREV by default when fetching from git") Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Alex Kiernan [Sun, 5 May 2019 05:23:32 +0000 (06:23 +0100)]
go: Exclude vcs files when installing deps
Because our clones use the host git, on (say) Ubuntu 18.04, the local
git directories acquire perl scripts such as fsmonitor-watchman.sample.
During packaging, this leads to failures:
ERROR: go-hsperfdata-1.0.3+gitAUTOINC+b58598ac84-r0 do_package_qa: QA Issue: /usr/lib/go/pkg/dep/sources/https---github.com-nsf-termbox--go/.git/hooks/fsmonitor-watchman.sample contained in package go-hsperfdata-staticdev requires /usr/bin/perl, but no providers found in RDEPENDS_go-hsperfdata-staticdev? [file-rdeps]
ERROR: go-hsperfdata-1.0.3+gitAUTOINC+b58598ac84-r0 do_package_qa: QA run found fatal errors. Please consider fixing them.
ERROR: go-hsperfdata-1.0.3+gitAUTOINC+b58598ac84-r0 do_package_qa:
ERROR: go-hsperfdata-1.0.3+gitAUTOINC+b58598ac84-r0 do_package_qa: Function failed: do_package_qa
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Alex Kiernan [Sun, 5 May 2019 05:23:13 +0000 (06:23 +0100)]
python3: Add ntpath.py to python core
The newer python3 recipe no longer includes ntpath.py in core, leading
to failures in pkg_resources:
Traceback (most recent call last):
File "/usr/bin/bmaptool", line 6, in <module>
from pkg_resources import load_entry_point
File "/usr/lib/python3.7/site-packages/pkg_resources/__init__.py", line 42, in <module>
import ntpath
ModuleNotFoundError: No module named 'ntpath'
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hongxu Jia [Sun, 5 May 2019 10:04:24 +0000 (18:04 +0800)]
cpio/tar/native.bbclass: move rmt to sbindir and add a prefix to avoid native clashing
The rmt in cpio-native and tar-native is clashing, since
tar-native has set var-NATIVE_PACKAGE_PATH_SUFFIX, we move rmt
to sbindir, and add suffix NATIVE_PACKAGE_PATH_SUFFIX to sbindir
could avoid the clashing.
And in Ubuntu, rmt is in sbindir
$ which rmt
/usr/sbin/rmt
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Barker [Fri, 3 May 2019 11:54:48 +0000 (11:54 +0000)]
license_image: Use new oe.path.copyhardlink() helper
This change allows us to support the placement of WORKDIR and DEPLOY_DIR
on different devices.
Signed-off-by: Paul Barker <paul@betafive.co.uk> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Barker [Fri, 3 May 2019 11:54:47 +0000 (11:54 +0000)]
oe.path: Add copyhardlink() helper function
This function creates hard links if possible, falling back to copying
the file if the destination is on a different volume to the source.
The docstring for copyhardlinktree() is also updated to make the
difference between the two functions a little clearer.
Signed-off-by: Paul Barker <paul@betafive.co.uk> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Fri, 3 May 2019 06:29:26 +0000 (23:29 -0700)]
mdadm: Disable Werror
Werror spews more warnings with gcc9, like other distros (
debian/fedora) disable Warnings as errors
Fixes
super-intel.c:696:9: error: taking address of packed member of 'struct imsm_super' may result in an unaligned pointer value [-Werror=address-of-packed-member]
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
xorg-lib: drop native overrides for REQUIRED_DISTRO_FEATURES
x11 is actually always present in native DISTRO_FEATURES, and
so it's fine to require it in all cases.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Max Kellermann [Thu, 7 Mar 2019 13:04:01 +0000 (14:04 +0100)]
initrdscripts: merge multiple "mkdir" calls
Reduce overhead.
Signed-off-by: Max Kellermann <max.kellermann@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Max Kellermann [Thu, 7 Mar 2019 13:04:00 +0000 (14:04 +0100)]
useradd-staticids: print exception after parse_args() error
Without this, the user has no idea what went wrong.
Signed-off-by: Max Kellermann <max.kellermann@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Alex Kiernan [Wed, 17 Apr 2019 18:31:16 +0000 (18:31 +0000)]
uboot-sign: Fix build when UBOOT_DTB_BINARY is empty
When UBOOT_DTB_BINARY is empty and because the code now changes
directory into ${B}, the test for the existence becomes `[ -f ]` which
succeeds and subsequently the install fails.
Reorder the code so it's clear that UBOOT_DTB_BINARY empty is an
expected configuration and then quote UBOOT_DTB_BINARY everywhere so
no one trips over this again.
Fixes: bacb59079eb6 ("uboot-sign: add support for different u-boot configurations") Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Thu, 2 May 2019 13:52:22 +0000 (13:52 +0000)]
opkg: fix ptest packaging when OPKGLIBDIR == libdir
there is small issue with ptest packaging in cases where
OPKGLIBDIR is set to /usr/lib.
Then all ptest files get packaged in libopkg instead of opkg-ptest and correct QA error is triggered:
ERROR: QA Issue: /usr/lib/opkg/ptest/tests/opkgcl.py contained in package libopkg requires /usr/bin/python3, but no providers found in RDEPENDS_libopkg? [file-rdeps]
# $FILES_libopkg
# set /jenkins/mjansa/build-webos-master/oe-core/meta/recipes-devtools/opkg/opkg_0.4.0.bb:62
# "${libdir}/*.so.* ${OPKGLIBDIR}/opkg/"
FILES_libopkg="/usr/lib/*.so.* /usr/lib/opkg/"
Alex Kiernan [Thu, 2 May 2019 21:09:44 +0000 (22:09 +0100)]
image: call systemctl preset-all for images
Rather than rely on systemd's default invocation of preset-all at
runtime, we pre-populate the symlink tree as part of of the image. This
is done late so any overrides of presets during rootfs construction
should already have happened.
Whilst we don't strictly need this for the read-write root case, it
avoids boot time churn; for read-only root we have to do it here.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Alex Kiernan [Thu, 2 May 2019 21:09:43 +0000 (22:09 +0100)]
systemctl-native: Rewrite in Python supporting preset-all and mask
Rewrite systemctl-native in Python so that extending/testing it is
easier.
Now that the systemd class sets up service presets instead of actively
enabling services, the 'enable' and 'disable' subcommands for systemctl
are not actually used anywhere. As such, we can remove these to make
sure that nobody inadvertently introduces new uses of them.
This implementation covers `preset-all` and `mask` which are the only
options used in the current code, but should be readily extensible to
other commands.
We use `preset-all` at image construction time to populate the symlinks
used by systemd.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jonas Bonn [Thu, 2 May 2019 21:09:42 +0000 (22:09 +0100)]
systemd: create preset files instead of installing in image
At first boot, systemd will create the /etc/systemd/system directory
from service preset files. As such, for a normal, writable /etc
(writable rootfs), there is no need to set up this directory at image
creation time.
This patch changes the systemd machinery to create preset files and to
rely on systemd to do the service enablement.
This breaks the read-only-rootfs case; there's a fix for this in a
follow-up patch.
Signed-off-by: Jonas Bonn <jonas@norrbonn.se> Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Alex Kiernan [Thu, 2 May 2019 21:09:41 +0000 (22:09 +0100)]
systemd-conf: simplify creation of machine-specific configuration
The configuration files that systemd installs are just skeletons
detailing the available options and their default values. The
recommended means of changing the configuration is to provide snippets
in configuration directories. For example, journald.conf settings are
best set in /usr/lib/system.d/journald.conf.d/ and can be overridden by
the user by providing overriding snippets in
/etc/systemd/journald.conf.d/.
The systemd-conf package is just providing machine-specific overrides
for some systemd defaults.
This patch restores the installation of config files by systemd and
reduces systemd-conf to just providing the config snippets in
/usr/lib/systemd/*.conf.d. This simpilfies the systemd-conf recipe
considerably since it now just sets up a couple of text files and
doesn't even need access to the systemd source anymore.
License-Update: configuration snippets licensing is independent of
systemd licensing
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jonas Bonn [Thu, 2 May 2019 21:09:40 +0000 (22:09 +0100)]
systemd: do not create machine-id
There is no reason to have an emtpy machine-id as part of the systemd
package. Either:
i) the filesystem is writable and the file will be created
automatically; or
ii) the filesystem is read-only, in which case the empty machine-id file
should be created as part of the read-only-rootfs tweaks.
Signed-off-by: Jonas Bonn <jonas@norrbonn.se> Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jonas Bonn [Thu, 2 May 2019 21:09:39 +0000 (22:09 +0100)]
systemd: don't build firstboot by default
The firstboot service prompts the user for information about the host at
first boot. Systemd determines whether or not a boot is a "first boot"
by the existence of the file /etc/machine-id. Since oe-core always
includes this file (it is part of the systemd package), the firstboot
service never runs so this service is being built but never run.
A follow-up patch to this one will remove the machine-id from the
systemd build and allow it to be created automatically by systemd at
"first boot". With that patch, we don't want the firstboot service to
suddenly start being invoked and presenting a prompt to the user.
With this patch, the firstboot service becomes a PACKAGECONFIG option
that the user must actively select.
Signed-off-by: Jonas Bonn <jonas@norrbonn.se> Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changqing Li [Tue, 30 Apr 2019 09:08:21 +0000 (17:08 +0800)]
populate_sdk_base: provide options to set sdk type
Current sdk type is tar.xz, but for mingw sdk, since we
have symlink under the sdk folder, 7zip which used to
extract tar.xz cannot handle it, refer 7zip upstream bug:
https://sourceforge.net/p/sevenzip/discussion/45797/thread/c71d6b96/
so add option for usr can select the sdk type.
Add override SDK_ARCHIVE_TYPE, default type is tar.xz, and also
support type zip. user want to use zip type can set SDK_ARCHIVE_TYPE
to zip.
Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changqing Li [Wed, 17 Apr 2019 08:38:26 +0000 (16:38 +0800)]
dbus: fix ptest failure
1. since one bug in run-ptest, testcase test-bus have never been
actually run (althrough it's result is PASS).
After commit 0828850, test-bus can actually run but it
did not install:
test-service, test-shell-service, test-segfault, and
dbus-daemon-launch-helper-test
Add the configure flag:
--enable-embedded-tests
to generate binary dbus-daemon-launch-helper-test, then install
them so that test-bus will now pass.
2. fix testcase test-dbus-daemon failed
we enable --enable-verbose-mode in recipe dbus-test, and don't
enable it in recipe dbus. This will make below test code get
unexpect result of have_verbose and assert.
disable --enable-verbose-mode for recipe dbus-test to fix it.
This commit upgrade QEMU to the latest 4.0.0 release.
- The COPYING.LIB file has changed SHA to:
"Synchronize the LGPL 2.1 with the version from gnu.org"
- SDL 1.2 has been removed, along with the --with-sdlabi command line
arg
- The backported patches have been removed
- Al the other patches have been refreshed and the numbering has been
updated
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joshua Watt [Wed, 1 May 2019 20:35:23 +0000 (15:35 -0500)]
bitbake.conf: Account for older versions of bitbake
Older versions of bitbake (prior to 1.42) don't expose the BB_UNIHASH
variable which is being used by sstate. For compatibility with these
older versions of bitbake, set BB_UNIHASH to BB_TASKHASH (which is the
value it should be for non-hash equivalent aware signature generators).
if bitbake hasn't already set it.
[YOCTO #13314]
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 1 May 2019 15:37:48 +0000 (16:37 +0100)]
elfutils: ptest fixes
Changes to improve the way ptest runs:
a) Use the standalone test mode which allows the tests to be run in their
'installled' locations on target (but not any of the standalone build pieces)
b) We want to use the binaries from their installed locations so the run-subr
script needs tweaking to run them like that. The rpath conditional isn't
enough since we want the second entry in the case statement.
c) Add an oecheck make target which we can use to build the test binaries we need
d) Add missing -ptest package dependencies (needs coreutils, ${PN}, ${PN}-binutils, make)
e) Don't add RPATH to the test binaries, we don't need that
f) Add some extra parameters to the make command to ensure tests run correctly
Ross Burton [Wed, 1 May 2019 13:18:35 +0000 (14:18 +0100)]
mpg123: port to use libsdl2
libsdl 1.2 is dead upstream, so change mpg123 to use libsdl2. Luckily the APIs
that mpg123 use haven't changed, so this is just a matter of changing the
pkg-config name.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Rini [Wed, 1 May 2019 12:51:09 +0000 (08:51 -0400)]
vim: Update to 8.1.1240
This brings us to the current version of vim. As part of this we need
to work-around a locale issue that upstream has exposed. We do not
support fully / correctly the certain locales. Attempting to use these
with msgfmt in order to update the ".desktop" files exposes this problem
and leads to the compile failing.
Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Rini [Wed, 1 May 2019 12:51:08 +0000 (08:51 -0400)]
vim: Rework to not rely on relative directories
The vim recipe has all of the code inside the "src" subdirectory but
other things we rely on, such as the license file in a subdirectory
relative to the src. However, as there is a top-level "configure"
script that moves us down to the src directory, we can rework the recipe
to be overall more simple and regularly laid out if we use that.
Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 1 May 2019 07:00:00 +0000 (08:00 +0100)]
oeqa/ssh: Avoid unicode decode exceptions
This code really needs to be rewritten to not split potential
multibyte characters, for now work around it to avoid exceptions like:
File "/home/pokybuild/yocto-worker/qa-extras2/build/meta/lib/oeqa/core/target/ssh.py", line 211, in run
data = reader.read(1024, 4096)
File "/usr/lib64/python3.6/codecs.py", line 503, in read
newchars, decodedbytes = self.decode(data, self.errors)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0x92 in position 0: invalid start byte
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andreas Müller [Tue, 30 Apr 2019 13:19:27 +0000 (15:19 +0200)]
qemu: split out vte into seperate PACKAGECONFIG
* vte-native requires host compiler supporting c++17. Some distros we support
ship comilers not supporting c++17 currently.
* oe-self-test 'test_testimage_virgl_gtk' sets
PACKAGECONFIG_append_pn-qemu-system-native = " gtk+". With vte enabled by
'gtk+'-config, build fails on hosts with ancient compilers [1].
* Alexander Kanavin did some tests: Without vte in PACKAGECONFIG there is still
a working terminal available with reduced functionality [2].
* Users wanting 'full' terminal in system-qemu back should add
PACKAGECONFIG_append_pn-qemu-system-native = " vte"
in their local.conf.
The idea of this patch was coming from Ross Burton - thanks!
Ross Burton [Mon, 29 Apr 2019 14:55:11 +0000 (15:55 +0100)]
staging: add ${datadir}/gtk-doc/html to the sysroot blacklist
When api-documentation is enabled the GNOME stack builds API documentation. As
${datadir} is in SYSROOT_DIRS this documentation is in the sysroot but is never
used, wasting time and space.
Add ${datadir}/gtk-doc/html to the blacklist so that the generated documentation
isn't in the sysroot. Note that we don't blacklist all of ${datadir}/gtk-doc
because gtk-doc itself installs files there which are needed to use gtk-doc.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rework dlopen-test.patch to fix below
dlopen-test failure:
# cd /usr/lib64/nettle/ptest
# ./run-ptest
dlopen failed: /usr/lib/libnettle.so: cannot open shared object file: No such file or directory
./run-ptest: line 8: 7607 Aborted "./$f"
FAIL: dlopen-test
As the test dlopen-test depends on libnettle.so
which belongs to nettle-dev package, so add it
to rdepends of nettle-ptest.
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The commit[8ac8fa8ee1 nettle: update to 3.4.1]
add CFLAGS_append = " -std=c99" to silence the
below error for native build:
| ../nettle-3.4.1/rsa-sign-tr.c: In function 'sec_equal':
| ../nettle-3.4.1/rsa-sign-tr.c:243:3: error: 'for' loop initial declarations are only allowed in C99 mode
for (size_t i = 0; i < limbs; i++)
^
| ../nettle-3.4.1/rsa-sign-tr.c:243:3: note: use option -std=c99 or -std=gnu99 to compile your code
| Makefile:263: recipe for target 'rsa-sign-tr.o' failed
But the above change will trigger below Segmentation
fault:
# echo -n passwd| nettle-pbkdf2 -i 1 -l 16 salt
[65534.886509] nettle-pbkdf2[708]: segfault at 1f594260 ip 00007f3332256998 sp 00007fff60d44410 error 4 in libnettle.so.6.5[7f3332244000+1d00]
[65534.887525] Code: e8 6d db fe ff 44 01 6d 68 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 2e 0f 1f 84 00 00 00 00 00 49 89 dc e9 68 ff f
Segmentation fault
So update the logic to CFLAGS_append = " -std=gnu99"
to fix the issue.
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changqing Li [Mon, 29 Apr 2019 07:37:57 +0000 (15:37 +0800)]
piglit: support build piglit without x11
* test PIGLIT_BUILD_GL_TESTS depend on glx library, so depend
on x11, so respect the DISTRO_FEATURES, only enable it when
x11 is enabled.
* mesa-demos depend on libGL.so which is provide by recipe
mesa, but when x11 is disabled, libGL.so is not generated.
so we can only rdepend on this when x11 is enabled
* add x11 PACKAGECONFIG to add correct config/depend/rdepend
[YOCTO #6077]
Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow users to change the default cgroup mode at build time
and use the unified hierarchy mode.
Disabled by default - hybrid is the default upstream value.
Signed-off-by: Luca Boccassi <luca.boccassi@microsoft.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 26 Apr 2019 14:52:16 +0000 (10:52 -0400)]
linux-yocto/5.0: port RAID configuration tweaks from master
Porting the following three RAID config changes from master to
the 5.0 branch:
ffd8cf5baf8 intel-x86: add Intel VMD support 8edf951a15c cfg/efi.cfg: built-in CONFIG_EFIVAR_FS to support Intel VROC 041a6c04244 intel-x86: built-in nvme driver to support boot from nvme disk
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was a 4.19.31 backport of commit 6ea183d60c46 ("mm: handle
lru_add_drain_all for UP properly"). In summary, what that did
was to fix a possible harmless WARN_ON on non-SMP, introduced at
commit 4d43d395fed1 ("workqueue: Try to catch flush_work() without
INIT_WORK().") by adding non-SMP variants of lru functions.
The combination of that, with the -rt commit 473f14a9f234 ("mm:
perform lru_add_drain_all() remotely") at the merge of the two
results in the following build failure:
mm/swap.c:736:2: error: #endif without #if
since the -rt change wants RT specific lru and the stable backport
wants non-SMP specific lru, and a chunk of the backport with
an #ifdef CONFIG_SMP is missing.
However, before we add a four way cluster of ifdeffery to handle all
cases, we note 4d43d395fed1 was added to the v5.1 release, and it
was not (currently) backported to any 4.19.x stable release - so it is
unclear to me why this commit was ever backported to 4.19.31 at all.
Further, we note this change was to mm/swap.c -- and by definition,
any preempt-rt deployment that uses swap for anything other than a
failure contingency mitigation is broken by design.
Given all that, I decided that the best path forward was to revert
the two of the three chunks of the backport that remain in the -rt
branch, and return us to the pre-4.19.31 merge behaviour for -rt.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This provides git large file storage (lfs) extension.
Include git-lfs conditionally. If git-lfs is present on host and repo
has lfs pointers, then git-lfs will be used. If git-lfs is not present
on host, it will be ignored.
[YOCTO #13198]
Signed-off-by: Naveen Saini <naveen.kumar.saini@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jaewon Lee [Thu, 25 Apr 2019 23:02:21 +0000 (16:02 -0700)]
Adding back wrapper and using OEPYTHON3HOME variable for python3
Adding back the python wrapper and adding a patch to use OEPYTHON3HOME
instead of PYTHONHOME if set, for python3.
If we add back the wrapper as is, we would see the following error that
we also see in Thud:
ImportError: No module named site
OpenEmbedded requires 'python' to be python v2 (>= 2.7.3), not python
v3.
Please upgrade your python v2
This is because python3 would've set PYTHONHOME to use nativesdk
python3 libraries but when the oe-buildenv-internal script tries to call
python2 for the py_v27_check, there will be no python2 libraries in the
PYTHONHOME directory.
In other words, bitbake needs host python2 and the env variable set from
the wrapper contaminates the env and host python2 won't be able to find
its libraries
Creating another variable OEPYTHON3HOME and using this in the python3
wrapper to allow for a way to set a different paths for python3 and
python2
[YOCTO #13208]
Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
