Jiajun Xu [Fri, 29 Oct 2010 17:03:22 +0000 (01:03 +0800)]
imagetest-qemu: Add test case for dmesg check in target
Add a test case for error log check with command dmesg in target. The
case introduces a new folder in target, "/opt/test", which holds test
scripts running in target.
Kevin Tian [Tue, 26 Oct 2010 07:54:43 +0000 (15:54 +0800)]
package.bbclass: make sure 'sysroots' created before lockfile
package sstate requires a lock under sysroots/, which however may not be
created when sstate_setscene functions are executed and then causes failures.
here we make sure 'sysroots' created before do_package_setscene is executed.
Kevin Tian [Fri, 5 Nov 2010 07:16:50 +0000 (15:16 +0800)]
poky.conf: add PWD to BB_HASHBASE_WHITELIST
Without doing this I can't reuse prebuilts generated from one directory in another
build directory which is really not comfortable for developers. Due to difference
on PWD variable, base hash becomes different for every sstate package.
So here PWD is added to the hase base whitelist, which makes most prebuilts reusable
now in a different build directory. However there still remains one issue about
do_populate_sysroot sstate package. Absolute path is encoded in this task which
then blocks reuse on them. Perhaps we need some redesign for do_populate_sysroot into
two stages, with all absolute path related operations moved to the 2nd stage. This
way then the 1st stage can be reused.
Scott Rifenbark [Thu, 4 Nov 2010 20:01:19 +0000 (13:01 -0700)]
Created a new folder to hold the BSP Guide
I created a new sub folder to hold the BSP Guide by itself so there are
three folders now for each of the Yocto manuals: BSP Guide, quick start
and poky ref manual. The new folder for the BSP guide is 'bsp-guide'.
It contains the bsp.xml file, its own Makefile, a bsp-guide.xml file,
and its own 'Figures' directory. The 'bsp-guide.xml' file that was
in the poky reference folder was deleted.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Thu, 28 Oct 2010 21:29:17 +0000 (14:29 -0700)]
General edits to the using poky and Extending Poky chapters.
I completed general edits to the second chapter of the poky reference
manual. These edits went from section 2.4.5 through the end of the
chapter. They consist of text rewrites for more active voice and follow
general technical writing principles.
I completed the same types of edits in the third chapter of the manual
from the beginning through section 3.3.2.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Wed, 27 Oct 2010 15:57:26 +0000 (08:57 -0700)]
Editing pass through the Introduction chapter.
I did a complete edit pass through this chapter. The manual has
not been fully edited from its original state. One critical technical
correction was corrected where the green-3.3 release was referenced.
I changed this to laverne 4.0.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Tue, 26 Oct 2010 16:23:59 +0000 (09:23 -0700)]
Figure changed for building an image and yoctolinux removed
I changed the figure that goes along with building an image based on
Kevin's input. Also, removed several URLs that had 'yoctolinux' in them
along with a 'tar' command example with the same string. LF does
not want these in there.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Fri, 22 Oct 2010 21:55:10 +0000 (14:55 -0700)]
Removed text from section 5.1.2.1.1.
Removed several blocks of text from section 5.1.2.1.1
"Installing and Setting up the Eclipse IDE". This text according
to Jessica was no longer needed.
Scott Rifenbark [Fri, 22 Oct 2010 16:14:20 +0000 (09:14 -0700)]
Re-installed the Poky Handbook image at the top of the manual
I could not get the Yocto Project logo to appear correctly in the book
after the title. I also decided that since Poky is by no means
going away that this book should have that image associated with it
as it is the Poky Reference Manual.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Fri, 22 Oct 2010 15:36:29 +0000 (08:36 -0700)]
Updated the yocto-environment picture and added example command edits.
When scaled to fit the page the picture had a black vertical line
artifact to the right. I snipped out the image a little tigher to
eliminate this line.
I also incorporated Dirk's comments tightening up the sequence of
example commands to do the build. I incorporated Fedora 14 note
and addition of the BB_NUMBER_THREADS and PARALLEL_MAKE variables.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Thu, 21 Oct 2010 21:10:47 +0000 (14:10 -0700)]
Removed first link to openembedded and replaced with more general text.
The link to openembedded was used to reference Linux distributions supporting
Yocto Project. The link has been removed and replaced with more generic
text so as to not have to link to openembedded. Text used is
"A Host system running a supported Linux distribution (i.e. recent releases
of Fedora, OpenSUSE, Debian, and Ubuntu)."
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Thu, 21 Oct 2010 20:11:46 +0000 (13:11 -0700)]
Updated supporting text to reflect new poky-4.0-build directory in example
The example commands that build an image were updated to reflect the
real 4.0 release. I updated the paragraph after the example commands
to refer to the new release used in the command examples.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Wed, 20 Oct 2010 16:47:09 +0000 (09:47 -0700)]
Review changes applied.
1. Added Richard Purdie's general editing feedback to the "Welcome" and
"Introducing the Yocto Project Development Environment" sections.
2. Added Kevin Tian's feedback: 1) changed "Sudo" to "sudo", 2) reversed
the order of the sample "cd" and "source" commands since the "source" command
builds the directory structure first so changing to the directory before running
"source" made no sense, 3) removed the "bitbake qemu-native" command.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Wed, 20 Oct 2010 16:44:35 +0000 (09:44 -0700)]
Updated figure.
Feedback from Kevin Tian suggested that the outer box be labeled "QEMU" rather
than "Target." Also that the two inner boxes be "Set of Emulated Devices" and
"Target CPU." Final change was the use of "Yocto Project Scripts" rather than
"Yocto Linux Scripts."
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Wed, 20 Oct 2010 16:36:08 +0000 (09:36 -0700)]
Removed reference to pre-build in section 5.3.2, "Using OprofileUI".
The "Using OprofileUI" section had a description of how to use a
pre-built UI and how to download and build one. Feedback from Jessica
Zhang suggested removing the instruction for using a pre-built UI.
All that remains in the first paragraph now is instruction on how
to download and build the UI.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Mon, 18 Oct 2010 20:53:26 +0000 (13:53 -0700)]
Added the Anjuta Plug-in information
Added section 5.1.2.2 "The Anjuta Plug-in" into the Poky Reference Manual.
This section consists of sub-sections 5.1.2.2.1 "Setting Up the Anjuta
Plug-in", 5.1.2.2.2 "Configuring the Anjuta Plug-in", and 5.1.2.2.3 "Using
the Anjuta Plug-in". This information was in the original Poky Handbook
but had been removed by me since I thought it was not going to be supported
for the 0.9 Yocto Release. It has now been restored with a note indicating
that Anjuta will not be supported post 0.9 release.
I did some general text editing in each section for readability.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Zhai Edwin [Fri, 22 Oct 2010 09:11:26 +0000 (17:11 +0800)]
Fix adding new contact failure when starting contacts for the 1st time
When contacts called for the 1st time, adding new contact always failed but
worked after restart. The reason is e-addressbook-factory used to handle
addressbook leads a segmentation fault. Root cause is that factory would
create the data base if not exist, but use it without proper
initialization.
Richard Purdie [Fri, 22 Oct 2010 13:27:44 +0000 (14:27 +0100)]
sstate: Fix mirror handling for file:// urls
The fetcher has special handling for file:// mirror urls, being efficient and
just providing an updated path. Unfortunately the sstate fetching code wasn't
able to handle this. This patch detects this and injects a symlink to ensure
everything works. It also fixes some datastore references to be correct and
ensures the sstate download directory exists if it doesn't already.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Joshua Lock [Fri, 22 Oct 2010 12:50:14 +0000 (13:50 +0100)]
documentation/bsp: update to reference FILESEXTRAPATHS
It's no longer neccesarry to define THISDIR and FILESPATH in each bbappend
recipe. Should you need to reference extra files you should use FILESEXTRAPATHS
Richard Purdie [Fri, 22 Oct 2010 12:00:40 +0000 (13:00 +0100)]
pseudo/fakeroot: Move the pseudo directory creation into bitbake
If sstate was used to accelerate a build, the pseudo directory might not have
been created leading to subsequent task failures.
Also, sstate packages were not being installed under pseudo context meaning
file permissions could have been lost.
Fix these problems by creating a FAKEROOTDIRS variable which bitbake ensures
exists before running tasks and running the appropriate setscene tasks under
fakeroot context.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Richard Purdie [Fri, 22 Oct 2010 11:56:20 +0000 (12:56 +0100)]
package_rpm: Don't check for the existence of dvar as its never used
If a sstate package exists for the package task but not for the rpm packaging
task, the output from the package task will be used. The directory pointed
to by dvar will not exist under this scenario.
Since the directory is never used by the packaging process remove the
check, substituting the pkgd variable which is always present and used.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Richard Purdie [Fri, 22 Oct 2010 11:51:35 +0000 (12:51 +0100)]
sstate: Fix broken plaindirs support
When installing a sstate package, directories tracked by plaindirs were being installed
to the incorrect location. With the current implementation this was limited to
the do_package task.
This patch ensures plaindirs tracked files are created in the correct location, fixing
the bug where these files would go missing.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Mark Hatle [Thu, 21 Oct 2010 17:26:14 +0000 (12:26 -0500)]
at: Fix nonstripbinaries.patch
The commit '0e0d14ed1e88ebff876abb3d00b08627a3879e8d' introduced a new patch
nonstripbinaries.patch, the filename format caused the patch to not apply.
Simple fix made by correcting the path.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Bruce Ashfield [Thu, 21 Oct 2010 04:37:54 +0000 (00:37 -0400)]
gst-ffmpeg: powerpc build errors
Fixes [BUGID #501]
While building the poky-image-sato target, gst-ffmpeg failed when
it attempted to run altivec tests on the host. We can live without
this optimization, so the easiest fix is to simply disable it.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Thu, 21 Oct 2010 04:30:07 +0000 (00:30 -0400)]
mpc8315e-rdb: align PACKAGE_EXTRA_ARCHS with tuning
Fixes [BUGID #500]
While the tuning for the mpc8315e is 603e, the PACKAGE_EXTRA_ARCHES
was ppce300. This created a mismatch and resulted in rootfs assembly
issues due to missing locales.
We align both at 603 and can revist a better tuning in the future.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Mei Lei [Thu, 21 Oct 2010 04:36:51 +0000 (12:36 +0800)]
at: remove nonrootinstall patch and modify some relevant files
remove nonrootinstall patch, and use a patch named nonstripbinaries to modi
fy the /at-3.1.10.2/Makefile.in, so it can also handles stripping of the bi
naries
Yu Ke [Tue, 19 Oct 2010 07:15:17 +0000 (15:15 +0800)]
sysklogd: correct the syslog link and conf file
This commit fix [BUGID #482]
Two issues cause bug 482:
- firsty, there are two version of syslog: sysklogd and busybox.
the busybox one is directly installed as /etc/init.d/syslog,
and the sysklogd one is installed by update-alternative. the
update-alternative will thus fail because the /etc/init.d/syslog
(busybox one) already exist and not a link. so the correct way
is to install busybox one by update-alternative, the layout will be:
/etc/init.d/syslog.busybox
/etc/init.d/syslog.sysklogd
/etc/init.d/syslog -> syslog.busybox or
/etc/init.d/syslog -> syslog.sysklogd
- secondly, sysklogd default conf is not comply with poky. Its dir /var/adm/
does not exist. Check the debian /etc/syslog.conf and find it is more
sophiscated and suitable, so port /etc/syslog.conf from debian.
Bruce Ashfield [Mon, 18 Oct 2010 19:33:30 +0000 (15:33 -0400)]
wrs_meta: emenlow updates
Fixes [BUGID #465]
wrs_meta: add logbuf size feature
A 16k kernel log buffer size is too small for emenlow and atom-pc -
boot messages are routinely lost with the current setting. Increase
the size to something more reasonable - 64k seems to be a good
compromise.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
emenlow: add cmdline option for reboot quirk
The default reboot options don't work for emenlow i.e. kbd + triple
results in a reboot hang. According to the emenlow chipset manual,
port CF9 is supported, so let's use that.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Richard Purdie [Tue, 19 Oct 2010 16:17:41 +0000 (17:17 +0100)]
bitbake/fetch/git: Ensure fullclone repositories are fully fetched
The git fetcher was failing to pull in new branches into a git
repository mirror tarball as the git fetch command being used didn't
add new remote branches.
This patch uses "git fetch --all" for fullclones to ensure any
new remote branches are cloned correctly.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Richard Purdie [Tue, 19 Oct 2010 11:30:21 +0000 (12:30 +0100)]
bitbake/fetcher: Deal with a ton of different bugs
The more we try and patch up the fetcher code, the more things break. The
code blocks in question are practically unreadable and are full of corner
cases where fetching could fail. In summary the issues noticed included:
a) Always fetching strange broken urls from the premirror for "noclone"
git repositories
b) Not creating or rewriting .md5 stamp files inconsistently
c) Always fetching git source mirror tarballs from the premirror even
if they already exist but the checkout directory does now
d) Passing "None" values to os.access() and os.path.extsts() checks under
certain circumstances
e) Not using fetched git mirror tarballs if the preexist and always
try and fetch them.
This patch rewrites the sections of code in question to be simpler and
more readable, fixing the above problems and most likely other odd
corner cases.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
