Ross Burton [Mon, 4 Mar 2013 12:52:45 +0000 (12:52 +0000)]
default-providers: add default virtual provider for gtk-update-icon-cache
Use a virtual provider instead of a hard dependency so that if gtk+-native is
required in some configuration, this provider can be changed and then
gtk+-native and gtk-update-icon-cache-native won't be both built and conflict in
the sysroot.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 4 Mar 2013 12:52:44 +0000 (12:52 +0000)]
gtk-update-icon-cache-native: add
This recipe builds natively just the gtk-update-icon-cache binary that is
required to run the gtk-icon-cache.bbclass postinstall scripts.
The advantage of doing this is it means running 400 less tasks which takes four
minutes on my machine, as the alternative is building GTK+ natively (and so
libX11, freetype, fontconfig...).
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jackie Huang [Mon, 4 Mar 2013 01:34:30 +0000 (20:34 -0500)]
apr: add libtool to SSTATE_SCAN_FILES
The hardcoded paths in libtool will cause apache2 compile fail at
link stage when the package apr is installed from sstate cache, so
add libtool to SSTATE_SCAN_FILES.
[ CQID: WIND00405372 ]
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 3 Mar 2013 13:07:18 +0000 (13:07 +0000)]
buildhistory: Allow the version backwards check to be disabled
When the PR service is not enabled, the versions can go backwards and there
are cases we don't want to know about this. This patch adds a variable
allowing these checks to be turned off whilst still using buildhistory.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 3 Mar 2013 15:54:29 +0000 (15:54 +0000)]
recipes: Fix ALLOW_EMPTY with no package specified
There are various usages of ALLOW_EMPTY with no packages specified. This
is not recommended syntax, nor is it likely to be supported in the future.
This patch improves the references in OE-Core, either removing them if they're
pointless (e.g. when PACKAGES="") or specifying which package it applies to.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
kernel-arch.bbclass: don't pass extra args to KERNEL_{CC, LD, AR}
Commit a3ca06c3b45c791dd38dbf154ad0fc62b4063475 added extra args to
KERNEL_CC, these revert that bit while maintaining machine additions
in TARGET_??_KERNEL_ARCH
Producing incorrect instructions and generating the following errors:
CC arch/powerpc/kernel/init_task.o
| {standard input}: Assembler messages:
| {standard input}:384: Error: junk at end of line: `1'
| {standard input}:949: Error: junk at end of line: `1'
| {standard input}:1428: Error: junk at end of line: `1'
| {standard input}:1526: Error: junk at end of line: `1'
| {standard input}:1626: Error: junk at end of line: `1'
| {standard input}:1685: Error: junk at end of line: `1'
| {standard input}:1973: Error: junk at end of line: `1'
| {standard input}:2001: Error: junk at end of line: `1'
| {standard input}:2100: Error: junk at end of line: `1'
| {standard input}:2168: Error: junk at end of line: `1'
| {standard input}:2520: Error: junk at end of line: `1'
| CC arch/powerpc/lib/locks.o
Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a more appropriate follow up patch from upstream. Also,
only powerpc64 requires libpfm4 currently for this specific
version of oprofile (x86, sparc can make use of libpfm but
don't make use of it here)
Additionally, this patch from upstream requires some more
patches to be pulled into oprofile
Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libpfm4_4.3.0.bb: use compatible host to limit arches
This is only test with powerpc64 currently, even though
it should work on other arches such as x86 and sparc. When
thos are testing and working this COMPATIBLE_HOST should
be updated
Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 9 Feb 2012 09:51:10 +0000 (09:51 +0000)]
package_rpm.bbclass: Optimise per file dependency handling
Currently the process for injecting the per file rpm dependencies into
rpmbuild is painfully slow. Its done through the repeated execution of
a script which has to return the correct value in each case. This continual
execution means the CPU usage of rpmbuild is low.
This patch allows the option of collapsing the per file dependencies to
a per package basis and injecting them through the .spec file. This removes
the execution overhead and allows rpmbuild to run at 100% of cpu.
Ultimately it would be nice to inject the per file dependencies through
the .spec file however that is not currently possible.
Since few people use the per file dependency information, this patch
goes for the faster approach. It can be enabled if anyone needs it although
I'd mention that its being used to us as this code may well go away in
the future if nobody complains.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Sat, 2 Mar 2013 17:06:56 +0000 (18:06 +0100)]
kernel: extract functions for kernel modules to separate bbclass
* this way we can reuse the same functionality also for external modules
including module_autoload_foo and module_conf_foo functionality
* MODULE_PACKAGES variable was removed (splited modules are now returned
by do_split_packages
* KERNEL_MODULES_META_PACKAGE is used to append all splitted packages
to RDEPENDS. In kernel.bbclass it's old "kernel-modules" in
module.bbclass it defaults to ${PN} for upgrade path from
single PN with all modules to PN depending on all new kernel-module-*
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
yanjun.zhu [Mon, 4 Mar 2013 04:35:57 +0000 (12:35 +0800)]
Python: Fix for CVE-2012-2135
Reference:http://bugs.python.org/issue14579
The utf-16 decoder in Python 3.1 through 3.3 does not update the
aligned_end variable after calling the unicode_decode_call_errorhandler
function, which allows remote attackers to obtain sensitive information
(process memory) or cause a denial of service (memory corruption and crash)
via unspecified vectors.
Richard Purdie [Sat, 2 Mar 2013 22:31:19 +0000 (22:31 +0000)]
qemuimage-tests/dmesg: Add exception for error message on qemuarm with 3.8 kernel
With 3.8 kernels we get a harmless error message during kernel boot.
For now we can ignore. This allows the tests to pass and ensures we
can merge the 3.8 kernel.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Mon, 25 Feb 2013 03:51:34 +0000 (03:51 +0000)]
linux-yocto: introduce 3.8 kernel recipe
Introducing the linux-yocto 3.8 kernel recipe. The tools and branch structure
of this tree are the same as the previous linux-yocto recipes, while the meta
data and content have been updated for the 3.8 kernel.
build and boot tested for qemu*.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Mon, 25 Feb 2013 02:03:29 +0000 (02:03 +0000)]
linux-libc-headers: update to v3.8
Now that the 3.8 kernel has been released we can bump the libc-headers
to that version and remove the 3.7 variant. Userspace compatibility is
maintained through kernel versions, we also make the single 3.8 version
the toolchain default.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
One of the functions of the kernel configuration audit is to notify
the user if Kconfig* files have been removed from the kernel, and
also to notify of new Kconfig files.
New Kconfig files should be classified as hardware or non-hardware to
allow BSP audits to notify if boards are setting values that they
shouldn't, hence why notifying about new "buckets" is important.
It is common to need the features (patches, git operations) of a
branch, but not want the kernel configuration fragments of a given
branch. To allow this, we provide a new include flag "nocfg".
When this flag is used, all of the configuration fragments included
by the targetted feature will not be applied to the current build,
with one exception, a base/critical fragment can force it's config
values, since without them, the system would not be functional.
Martin Jansa [Sat, 2 Mar 2013 17:06:58 +0000 (18:06 +0100)]
eglibc: move RPROVIDES to eglibc-package
* PROVIDES_${PN}-dbg doesn't look correct, it should be RPROVIDES
and that was already in eglibc-package
* RPROVIDES_${PN}-dev was overwritten in eglibc-package, but add
those 2 entries now
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Sat, 2 Mar 2013 17:18:15 +0000 (18:18 +0100)]
bitbake.conf: move PERSISTENT_DIR outside TMPDIR
* PR service cache needs to be persistent between rebuilds
having it in directory starting with tmp* does not help
people to understand that it needs to be persistent, so
move it to TOPDIR
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 2 Mar 2013 16:33:26 +0000 (16:33 +0000)]
depmodwrapper-cross: Mark as machine specific
The kernel and its staging directory are machine specific so the wrapper
needs to be as well. Also take the opportunity to remove the default
dependencies of the recipe since its a script and doesn't need the cross
compiler. This gives the build a little more scheduing freedom.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hongxu Jia [Sat, 2 Mar 2013 09:12:59 +0000 (17:12 +0800)]
package_deb.bbclass:fix meta-toolchain-sdk fail on do_populate_sdk
When build meta-toolchain-sdk in a newly created environment, there is
an error:
...
packagegroup-core-standalone-gmae-sdk-target set to manually installed.
You might want to run `apt-get -f install' to correct these:
The following packages have unmet dependencies:
avahi-dev: Depends: avahi (= 0.6.31-r6.1) but it is not going to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a
solution).
...
In this case, avahi was installed and then removed by dpkg (the reason is
unknown, only with log `Noting disappearance of avahi, which has been
completely replaced'), the uninstall was done by dpkg rather than apt,
and apt detected the package dependency was broken, so apt-get install failed.
Use `apt-get install -f' to correct the upper broken dependencies in place.
The removed avahi will be reinstalled.
[YOCTO #3720]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hongxu Jia [Sat, 2 Mar 2013 09:12:58 +0000 (17:12 +0800)]
package_deb.bbclass:fix the arch (replace "_" with "-") in deb package control
when build deb image, such as building meta-toolchain-sdk in x86_64 host,
there is warning like that:
...
'x86_64' is not a valid architecture name: character `_' not allowed
(only letters, digits and characters `-')
...
The params in deb package control file don't allow character `_', only
letters, digits and characters `-' allowed. Change the arch's "_" to "-"
in the deb package's control file at the control file creation time. Such
as `x86_64'-->`x86-64'
[YOCTO #3721]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rich Dubielzig [Thu, 28 Feb 2013 18:43:47 +0000 (10:43 -0800)]
Add scratch directory for NFS upcall state storage
When the /var/lib/nfs/v4recovery directory is not present, NFSD cannot
record the upcall state and cannot end the 90-second grace period on
startup. This is true even when NFS4 is not being served according to
nfsstat.
More details and discussion here:
https://lkml.org/lkml/2012/6/11/206
Tom Zanussi [Fri, 1 Mar 2013 17:34:56 +0000 (11:34 -0600)]
perf: add bash dependency
There are a number of scripts in the perf installation that use bash,
so we need to add a run-time dependency on bash for them. If not, we
can generate build errors like "no package provides /bin/bash".
Fixes [YOCTO #3951].
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Tom Zanussi [Fri, 1 Mar 2013 17:34:57 +0000 (11:34 -0600)]
systemtap: add python and bash dependencies
There are a number of scripts in the systemtap installation that use
python and bash, so we need to add run-time dependencies for them. If
not, we can generate build errors like "no package provides
/usr/bin/python".
Fixes [YOCTO #3951].
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Jeffrey C Honig [Fri, 1 Mar 2013 02:12:51 +0000 (21:12 -0500)]
Help ncurses-native find terminfo on RHEL 6
[ CQID: WIND00405305 ]
When using ncurses from sstate cache it is not able to find terminfo
for screen on RHEL 6. While RHEL 6 has /lib/terminfo, it is not
complete, the complete terminfo database is in /usr/share/terminfo. This
results failure of programs linked to ncurses, such as menuconfig.
Signed-off-by: Jeffrey C Honig <jeffrey.honig@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Laurentiu Palcu [Thu, 28 Feb 2013 11:56:26 +0000 (13:56 +0200)]
eglibc: fix ldd RTLDLIST
The sed expression for retrieving the previous RTLDLIST from ldd script
was also retrieving the double-quotes. Hence, we ended up with a
RTLDLIST like below and ldd would fail:
Saul Wold [Fri, 1 Mar 2013 22:18:27 +0000 (14:18 -0800)]
pulseaudio: add config option to ensure valgrind is excluded
There have been occasions that pulseaudio sees valgrind and then later it's
not available, adding this setting ensures determinism by disabling it by
default
Wolfgang Denk [Thu, 3 May 2012 13:48:48 +0000 (15:48 +0200)]
Add KERNEL_EXTRA_ARGS parameter
With recent kernel versions, some ARM configurations need may fail to
build with errors like this:
multiple load addresses: 0x80008000 0x80008000
This is incompatible with uImages
Specify LOADADDR on the commandline to build an uImage
We cannot pass this information in EXTRA_OEMAKE, as
"meta/classes/kernel.bbclass" explicitly ignores all EXTRA_OEMAKE
settings. So add KERNEL_EXTRA_ARGS parameter so affected boards
can add for example
KERNEL_EXTRA_ARGS = "LOADADDR=0x80008000"
to their configuration. We make this general enough so other needed
command line options can be passed as well when compiling the kernel.
Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Thu, 28 Feb 2013 21:51:51 +0000 (15:51 -0600)]
module.bbclass: Create a new depmodwrapper to assist cross-installs
Previously the build path to STAGING_KERNEL_DIR was being embedded into the
package post install scripts. We avoid this behavior by generating a special
depmodwrapper script. This script contains that hard-coded path, ensuring
that re-use of the sstate-cache (and/or packages) will always run through the
wrapper generated by the current build with a checksum that includes
STAGING_KERNEL_DIR.
[ YOCTO #3962 ]
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Mon, 18 Feb 2013 23:26:08 +0000 (00:26 +0100)]
sanity: use lsb distro_identifier
* distro_identifier returns lsb_data['Distributor ID']-lsb_data['Release']
which in some cases is different then lsb_release -d -s, e.g.
Distributor ID: Ubuntu
Description: Ubuntu 12.04 LTS
Release: 12.04
Codename: precise
But we probably don't need to sanity list each point release in LTS
and sstate is already using distro_identifier as prefix for native
sstate archives
* This will need update to SANITY_TESTED_DISTROS (at least
s/Ubuntu 12.04 LTS/Ubuntu-12.04/g etc), that's why sending as RFC
first.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Kang Kai [Fri, 1 Mar 2013 10:02:14 +0000 (18:02 +0800)]
package_rpm.bbclass: name postinst files with package name
When create rootfs, some post install scripts need be run on device.
They are saved under directory /etc/rpm-postinst and named with numbers
such as 100, 101 etc.
Update to name the postinst script file with its package name instead of
just number. That may be more easy to debug when there is a error.
[YOCTO #3218]
Signed-off-by: Kang Kai <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When run "autoreconf" in toolchain, there is an error if the host's perl's
version is not the same as the one in the SDK, the error says that the
executable perl mismatches the perl lib's version.
This is because most of the autotools' scripts use the "#!/usr/bin/perl -w"
which is host perl, but the gnu-configize uses "#! /usr/bin/env perl" which
invokes the perl wrapper in the SDK, and the wrapper will set the PERL5LIB to
the SDK which causes the mismatch. We can make all the perl scripts to use the
host perl or the SDK perl to fix this problem.
[YOCTO #3338]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Donnelly [Wed, 27 Feb 2013 12:58:55 +0000 (12:58 +0000)]
shadow: remove grpconv argc check
The patched version of grpconv takes arguments but the check on
argc was not removed. This patch removes this check which
otherwise results in a spurious warning during rootfs creation.
Signed-off-by: Martin Donnelly <martin.donnelly@ge.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Mark Hatle [Thu, 28 Feb 2013 18:09:05 +0000 (12:09 -0600)]
kernel.bbclass: Add missing modules.order and modules.builtins
When running depmod, from kmod, warnings about missing modules.order
and modules.builtins occur. Looking back it is not clear why these
files were being ignored, other then nobody knew what to do with them.
Add the files into the kernel-base package, if they exist, ensuring
they will always get installed if at least one module is installed.
[ YOCTO #3963 ]
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Peter Seebach [Wed, 27 Feb 2013 21:19:01 +0000 (15:19 -0600)]
Update pseudo to 1.5.1
pseudo 1.5's enable-force-async works great, unless you use a host
where, inexplicably, stat(2) reports inconsistent and changing values
for a file's size or times for some time unless a file has been fsynced,
in which case you might want a way to cause an fsync to work.
Also noticed that some recent changes never made it into the docs, so
I did a little cleanup there. And changed the way NDEBUG suppresses
pseudo's debug messages, so arguments to them with possible side
effects (like calls into functions in another translation unit) can be
omitted, which should drastically reduce computational time if anyone
ever uses NDEBUG.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Bruce Ashfield [Sat, 16 Feb 2013 04:17:51 +0000 (23:17 -0500)]
v86d: compile against userspace safe kernel headers
v86d was building directly against the staged kernel in the target
sysroot. This has been fine in the past, but with recent (3.7) changes
to user headers into the "uapi" include structure, there are no longer
Without the preprocesor protection, v86d fails to build against any
kernel with uapi header files.
v86d doesn't actually need the whole kernel tree, the exported headers
are enough to build a working binary. This change sets the v86d variable
to ${STAGING_DIR_HOST}/usr, and once the v86d build adds "include" to the
end of KDIR, we have a valid include path to the target sysroot headers.
This also works for pre-uapi kernel headers, so the change is safe for
most (if not all) kernel's with properly exported headers.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Bruce Ashfield [Wed, 6 Feb 2013 05:17:46 +0000 (00:17 -0500)]
kernel-yocto: allow building from fetcher source dir
The linux-yocto recipes themselves always set S="${WORKDIR}/linux" and
arrange for the fetcher default of ${WORKDIR}/git to be renamed before
building.
Part of this rename involves an assumption that the directory used by
the fetcher can be removed as part of the renaming process, or in fact
that renaming is required.
If a derived recipe uses S="${WORKDIR}/git", the checkout phase fails
since the kernel source is removed as part of the processing.
To fix this the code now detects this situation and does not clean the
source directory before renaming the fetcher default (and in fact does
not rename it at all).
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Although the setting of KBRANCH is the suggested/primary way to interact with
the yocto kern-tools and the fetcher, some users may be more comfortable
modifying the SRC_URI branch parameter directly.
If they do, the tools will not force their branch and build output will be
different then they expect, in non obvious ways.
It's easy enough to detect this scenario, but checking the SRC_URI in the
same way that the git fetcher checks for the branch (and SRCREV). If we take
the value from the SRC_URI and use it directly in the patch/validate/update
routines, we'll stay consistent with KBRANCH if it is used, and also
automatically adapt to a manually changed branch parameter on the SRC_URI.
For all other users, there are no visible or behavioural changes as a result
of this change
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Martin Jansa [Wed, 27 Feb 2013 17:46:51 +0000 (18:46 +0100)]
systemd.bbclass: fix bb.error
NOTE: recipe avahi-ui-0.6.31-r7.0: task do_package: Started
ERROR: %s does not appear in package list, please add it avahi-ui-daemon
ERROR: %s does not appear in package list, please add it avahi-ui-dnsconfd
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Kang Kai [Tue, 26 Feb 2013 05:41:01 +0000 (13:41 +0800)]
rootfs_deb: remove run-postinsts from ROOTFS_PKGMANAGE
Remove package run-postinsts from ROOTFS_PKGMANAGE. run-postinsts has
already added in ROOTFS_PKGMANAGE_BOOTSTRAP and then added to rootfs
conditionally by checking image feature "package-management".
Signed-off-by: Kang Kai <kai.kang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Ming Liu [Tue, 26 Feb 2013 01:19:44 +0000 (09:19 +0800)]
parted: fix several integer overflows
Integer overflows were found in libparted/labels/dvh.c, while attemptting
to assign unsigned int values to int types in some places. These overflows
only can be observed on BE platforms like MIPS, when the "WORDS_BIGENDIAN"
macro is defined in parted.
Defined by unsigned int instead.
Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Hongxu Jia [Tue, 26 Feb 2013 07:57:17 +0000 (15:57 +0800)]
sstate-cache-management.sh:fix the incorrect usage of option `-d'
The description of option `-d' is not correct in useage. It is used to
remove duplicate and debug at the same time. Use option `-D' to control
debug info output and the option `-d' to flag remove duplicate.
Hongxu Jia [Tue, 26 Feb 2013 07:57:15 +0000 (15:57 +0800)]
sstate-cache-management.sh: fix remove duplicate failed when multiple archs
The implementation of `--remove-duplicated' has been modified by the commit:
http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/?id=0740f82aea92da0195524e37c372f9981e7f5e6d
In above commit, sstate cache files with multiple archs are not considered
duplicate and don't need to be removed as duplicated any more.
Update the description of `--remove-duplicated' in usage to keep consistent
with implementation.
Emilia Ciobanu [Tue, 26 Feb 2013 13:35:14 +0000 (15:35 +0200)]
distrodata: added some corner cases for svn and git repos
distrodata.bbclass: git tags can include only one digit, therefore
the regex that matches the latest version should also include this
case. For some svn repos, using the http protocol than using the
svn protocol to get infomation about revisions works better.
Muhammad Shakeel [Wed, 20 Feb 2013 13:50:22 +0000 (18:50 +0500)]
archiver class: Use tasks with sstate instead of pre/post funcs
* Add tasks to move sources, script/logs and diff/env files in
deploy directory.
* Enable SSTATE for 'do_archive_scripts_logs' task
* Enable SSTATE for 'do_dumpdata_create_diff_gz' task
* SSTATE is not used for sources/patches archiver task because source
archive package can result into a very large file. It will be an
unnecessary overhead to keep sources in DL_DIR and cached-binaries.
* If 'SOURCE_ARCHIVE_PACKAGE_TYPE' is 'srpm' then use pre/post functions
because in this case we do not want to use tasks to move sources/logs
in DEPLOY_DIR. 'do_package_write_rpm' is responsible for handling
archiver packages.
[YOCTO #3449]
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com> Signed-off-by: Noor Ahsan <noor_ahsan@mentor.com> Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
MiLo [Tue, 19 Feb 2013 17:23:15 +0000 (18:23 +0100)]
util-linux: Add package for libmount
The libmount shared library was part of util-linux. This caused
util-linux-mount to RDEPEND on util-linux, so including that would
also drag in all of util-linux and all its recommendations.
To break this circular dependency, add a libmount package that holds
the libmount.so.* files, just like the other libraries built by util-
linux.
