Mark Hatle [Mon, 2 Jul 2012 20:43:11 +0000 (15:43 -0500)]
base.bbclass: Add cross-canadian-${TRANSLATED_TARGET_ARCH} to the license exclusion list
This appears to be an oversight in the original implementation. All of the
host package types were being ignored except for the SDK cross-canadian type.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Mark Hatle [Sat, 23 Jun 2012 00:38:30 +0000 (19:38 -0500)]
image.bbclass: Add support to build the SDK in parallel with the image
When building an image recipe, you can now build a companion SDK by
calling the populate_sdk task:
bitbake -c populate_sdk core-image-minimal
Note: there are still issues w/ the SDK not working completely with
multilibs.
A lock is required between rootfs and populate_sdk activities to prevent
configuration file clashes and similar package management problems in ipk
and deb based systems. (RPM already had a lock for a different reason.)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Mark Hatle [Thu, 28 Jun 2012 21:09:27 +0000 (16:09 -0500)]
package.bbclass: Allow a package to skip per file dependency generation
Most of the time skipping per file dependency generation is a bad idea, but
when building a nativesdk or similar you may be required to pickup host
dependencies. These host dependencies can not always be reconciled within
the scope of other nativesdk components, so if we skip them we can facilitate
this unique situation.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Mark Hatle [Thu, 28 Jun 2012 21:08:51 +0000 (16:08 -0500)]
libc-common: Allow -dbg package to append, and not just set package variables
The libc-common attempts to rewrite the package information in a way similar
to debian.bbclass. When it does this, it should be appending to the
dependency variables (RPROVIDES, RREPLACES, and RCONFLICTS), instead
of simply setting a hard coded value. Otherwise the lib package can not
tailor the dependency variables to suite it's needs.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Richard Purdie [Mon, 2 Jul 2012 15:35:22 +0000 (16:35 +0100)]
autotools.bbclass: When configure fails, dump the config.log files the logs
When configure fails, it usually says "see config.log" yet nobody ever shares
the config.log file meaning the person trying to help invariably has to ask
for more information.
This patch dumps all the config.log files into the main bitbake log files when
configure fails, meaning all the information is present to help someone debug
such failures. It does make the log rather larger but this is preferable to
not having enough information in most cases.
[YOCTO #2463]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Gortmaker [Mon, 2 Jul 2012 05:44:45 +0000 (01:44 -0400)]
u-boot: do not clobber PARALLEL_MAKE setting
The u-boot tree is fully capable of parallel builds, so this
setting should not exist as a blanket setting for all of the
recipes. Going forward, if there is a parallelism issue
in u-boot, it needs to be reported and fixed there, and not
with the "make -j1" band-aid approach.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Paul Gortmaker [Mon, 2 Jul 2012 05:44:43 +0000 (01:44 -0400)]
u-boot: Don't make the -Os removal part of global settings.
We don't want to force everyone to be stripping the -Os
flags from their u-boot builds. Remove it, since it pertains
to an old toolchain issue that is no longer relevant, and it
breaks the powerpc mpc8315.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Mark Hatle [Fri, 22 Jun 2012 23:44:06 +0000 (18:44 -0500)]
populate_sdk: enable basic multilib support
In order to enable basic multilib support for the export of an SDK
image, a number of minor changes had to be made:
The value of MULTIMACH_TARGET_SYS needs to be variable. This way we
can define the value to the appropriate multilib. (Also in some cases
the default PACKAGE_ARCH is set to MACHINE_ARCH which is incorrect for
the SDK.) Add a companion REAL_MULTIMACH_TARGET_SYS, based on code
from meta-environment, to allow for this.
We have to convert the do_populate_sdk into a python call, and then
break up the previous items into three parts.
* Image construction
* Setup of environment files
* Generation of the tarball
Then we can iterate over the multilibs to populate the environment files.
Finally, matching changes were needed in the toolchain-scripts file. And
what I presume is an optimization of immediate evaluation for
TOOLCHAIN_CONFIGSITE_NOCACHE and ..._SYSROOTCACHE needed to be done at
runtime, otherwise the wrong values may be used.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Mark Hatle [Thu, 21 Jun 2012 20:11:53 +0000 (15:11 -0500)]
populate_sdk: Allow for attempt only packages in the SDK
We want to be able to supply attempt only packages in the SDK in order to
support more advanced SDK images that more closely match specific image
recipes.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Mark Hatle [Mon, 25 Jun 2012 17:38:36 +0000 (12:38 -0500)]
populate_sdk.bbclass: Split into two parts
populate_sdk was renamed to populate_sdk_base in order to allow for changes
that may break existing SDK recipes. Any such changes need an analog
in populate_sdk (new version) to restore previous desired behavior.
In addition to the rename, one minor change was made. The _base version
only had the do_populate_sdk as an added task, but no before or after defined.
For compatibility, populate_sdk has do_populate_sdk defined as "after"
do_install and before do_build, this is identical to the original behavior.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Mark Hatle [Mon, 18 Jun 2012 21:42:45 +0000 (16:42 -0500)]
Fix manual log file paths
When a recent change, the path to log files may be contained within an
arbitrary directory. To generate the manual log files in the correct path
we should be using the ${BB_LOGFILE}'s path instead of always assuming the
logs go into ${WORKDIR}/temp.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Darren Hart [Sat, 30 Jun 2012 02:53:13 +0000 (19:53 -0700)]
core-image*sdk: Add kernel-dev to sdk images
While sdk images already have dev-pkgs included, the kernel-dev package
is special and does not get installed. Add kernel-dev explicitly to the
*sdk image recipes.
Note: We have to be careful with "IMAGE_INSTALL +=" as it must appear
after "inherit core-image" which makes an "IMAGE_INSTALL ?=" assignment.
Darren Hart [Fri, 29 Jun 2012 02:51:31 +0000 (19:51 -0700)]
linux-yocto-custom: Remove linux-tools
Remove the linux-tools include as perf is now packaged independently.
Without this, including meta-skeleton in bblayers.conf results in a
build failure as linux-tools.inc cannot be found.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Bruce Ashfield <bruce.ashfield@windriver.com> CC: Tom Zanussi <tom.zanussi@intel.com>
Robert Yang [Fri, 29 Jun 2012 01:45:26 +0000 (09:45 +0800)]
icu 3.6: do_install failed: Segmentation fault
There is a "Segmentation fault" error when the tmpdir is longer than 470
(or less), this is because it used "char cmd[1024]" which is not enough
for the command line. Allocate a larger memory size should fix this problem.
[YOCTO #2664]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Khem Raj [Wed, 20 Jun 2012 21:31:10 +0000 (14:31 -0700)]
kconfig-frontends: New recipe
kconfig-frontends provides the kconfig infrastructure
thats used for linux kernel as a standalone package. Its
not intended to be used for kernel itself but can be
used by packages who are based on kconfig e.g. busybox
uclibc or new packages who wants to use kconfig infra
for the package build
kconfig-frontends names it's shared library as -3.4.0.so instead of .so.3.4.0,
this causes the -dev package to grab it since it matches on *.so. This error
would also have shown up with the old PACKAGE order.
Richard Purdie [Wed, 13 Jun 2012 10:38:16 +0000 (10:38 +0000)]
EXTRA_IMAGEDEPENDS is used to ensure things like qemu-native are built and
these are not strictly dependencies of the do_rootfs task. This patch
moves them to the do_build task allowing bitbake a little more flexibility
about when things need to get built by.
I noticed this when qemu-native failed to build and a rootfs was not generated
which is not the intended behaviour.
Also update the syntax to use appendVarFlag instead of get/setVarFlag
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Sat, 30 Jun 2012 21:11:25 +0000 (22:11 +0100)]
site/common-linux: fix incorrect size of pid_t for apr
If cross-compiling, apr's configure script assumes that pid_t is
64-bit which is wrong - it appears that 32-bit is a safe assumption
for Linux no matter what the architecture, so use that instead by
default.
This fixes Apache writing garbage to its pid file when built using apr
produced from this recipe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Wed, 27 Jun 2012 05:32:15 +0000 (22:32 -0700)]
uclibc-git: Update for building systemd
This adds uclibc patches to build systemd there are
new functions that are used by systemd which are needed
Additionally when using gold linker to build userspace
based on uclibc there are spurious hidden symbol that
show up in librt.so and libc.so which should not exist
Khem Raj [Thu, 28 Jun 2012 21:36:53 +0000 (14:36 -0700)]
uclibc: Separate the bits between uclibc and uclibc-initial
uclibc and uclibc-initial were providing conflicting PROVIDES
separate the common bits into logical pieces. Create a common
inc file to hold package information and version specific includes
so correct logical units can be included in uclibc and uclibc-initial
recipes.
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dennis Lan [Thu, 28 Jun 2012 21:36:50 +0000 (14:36 -0700)]
eglibc: support mipsel little endian, filter out -march=mips32
Quote for eglibc source:
for mips eglibc now builds syscall tables for all abi's
so we make sure that we choose right march option which is
compatible with o32,n32 and n64 abi's
e.g. -march=mips32 is not compatible with n32 and n64 therefore
we filter it out in such case -march=from-abi which will be
mips1 when using o32 and mips3 when using n32/n64
Signed-off-by: Dennis Lan <dennis.yxun@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Thu, 28 Jun 2012 21:36:49 +0000 (14:36 -0700)]
gcc-configure-sdk, gcc-configure-cross: Dont recompute USE_NLS
This was needed because on eglibc based builds we did not
define USE_NLS but now we define it in default config to have
a valid value so we do not need this here. Moreover it was
wrong and was not covering all cases of uclibc triplets
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Thu, 28 Jun 2012 21:36:47 +0000 (14:36 -0700)]
bitbake.conf: Add weak definition for USE_NLS
USE_NLS is generally defined for uclibc based system builds
and generally its defined to 'no' there. However this variable
does not exist at all for eglibc/glibc distributions. This
patch adds a weak definition to 'yes' on eglibc based system
builds. This will ease out some of the cryptic contructs we
have to define certain options based on USE_NLS and also
checking got uclibc at the same time to avoid pythong exceptions
when its not defined.
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Thu, 28 Jun 2012 21:36:48 +0000 (14:36 -0700)]
libgcc: Remove unpackage unwind.h
Fixes build warnings like below
WARNING: For recipe libgcc, the following files/directories were installed but not shipped in any package:
WARNING: /usr/lib/arm-oe-linux-gnueabi/4.7.2/include
WARNING: /usr/lib/arm-oe-linux-gnueabi/4.7.2/include/unwind.h
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Tue, 26 Jun 2012 20:15:49 +0000 (16:15 -0400)]
linux-yocto/3.0: update BSP descriptions to new kern-tools format
In tree linux-yocto 3.0 boards indicate that they are BSPs via
the older/obsolete syntax "scc_leaf". This line in their board
description is detected by the build process and is used to find
the BSP description and the kernel type they use as their base.
To work with the latest kern tools, the BSP descriptions should
be updated to "include <ktype> branch <machine>" to acheive the
same result.
All trees newer than 3.0 already have this change and do not need
to be updated.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Robert Yang [Mon, 25 Jun 2012 09:31:19 +0000 (17:31 +0800)]
bitbake.conf: disable ccache explicitly if it is not enabled
The autogen-native built error on FC17:
ccache: failed to create /dev/null/.ccache
This is because the default gcc command of FC17 is a symlink to ccache,
so the ccache will always be used regardless to the setting of CCACHE,
ccache uses $HOME/.ccache as the CACHE_DIR by default, but autogen set
HOME=/dev/null, so the error happens.
Disable ccache explicitly if it is not enabled would fix the problem,
otherwise it would always use ccache regardless to the setting of CCACHE
on Fedora 17.
The ccache 3.1.7 has a bug, it would always create $CCCHE_DIR/.ccache
even CCACHE_DISABLE=1.
Unset CCACHE_DISABLE in ccache.bbclass, since ccache only checks whether
there is a CCACHE_DISABLE in the environment or not, it doesn't care about
its value, so we need unset it explicitly when enable ccache.
[YOCTO #2554]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Ross Burton [Tue, 26 Jun 2012 10:10:23 +0000 (11:10 +0100)]
gconf.bbclass: don't register schemas in the install stage
Previously this was installing schemas in the sysroot, which is wrong for native
packages as nothing should touch the sysroot directly, and even more wrong for
non-native packages as the sysroot is irrelevant.
So, export the environment variable that stops the registration happening at
install time. The postinst script will handle the non-native case, and for the
sysroot I've opened #2648. This isn't a massive problem as nothing to my
knowledge actually installs schemas to the sysroot.
[YOCTO #2245]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Saul Wold [Tue, 26 Jun 2012 17:53:54 +0000 (10:53 -0700)]
native.bbclass: correct PATH to have native-intercept be prepended
This was needed since it was after the sysroots and thus in some cases
the native sysroot chown was being found and used instead of the script
provided by native-intercept/chown. This was noticed by the non-gplv3
build since it's coreutils depends on coreutils-native.
Zhenhua Luo [Tue, 26 Jun 2012 03:53:16 +0000 (11:53 +0800)]
linux-dtb: add multi-dtb build support
including following enhancement:
* support multi-dtb build
* skip dtb build and install when KERNEL_DEVICETREE is empty
* print a warning message when specified dts file is not available
Updating the 3.4 SRCREVs to pickup build fixes for -rt, feature backports,
and a second set of 3.4 configuration audit results.
d65afd9 profiling: delete reference of obsolete CONFIG_X86_UP_APIC 9431490 meta: fix net_sched.cfg include 242149d meta: add CONFIG_VIRTIO_CONSOLE to virtio configuration 671a822 meta: resync series -> branches e044ee1 rt: integrate patch to fix compile fail on certain configs edac822 ktest: update with v3.5 content 182b8da net_sched: Add CODEL queue management algorithm. c6adcd9 net_sched: move content out of cgroups dir c8edb3e sys940x: branch before merge 6d06257 ext3: delete duplicate enablement settings. 6a5a2f8 ipv6: build in the core support vs. it being modular e106230 ipv6: make standard and RT share a common config block 42996fb netfilter: coalesce bridge settings for standard and RT into a common file. 2b62fea netfilter: coalesce IPv6 settings for standard and RT into a common file. d1c38c8 netfilter: coalesce IPv4 settings for standard and RT into a common file. b5f9c7c preempt-rt: align with standard kernel type for basic cfg ea33e01 cfg: move devtmpfs cfg/scc to cfg/fs dir 517eda4 preempt-rt: combine two config fragments into one 171a30a cgroups: re-enable net_traffic config fragment 86a599d cgroups: delete old blkio patches 8be6e5b netfilter: add comment documenting external bb use case 90e06bf x86[_64]: align with korg on HOTPLUG_PCI, HOTPLUG_PCI_PCIE and PCI_MSI e103f7c seccomp: backport of BPF syscall filtering from v3.5
[YOCTO #1694]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Fri, 15 Jun 2012 19:33:46 +0000 (15:33 -0400)]
linux-yocto/3.4: update and categorize configuration options
Updating the 3.4 kernel tree with some initial results of the 3.4
kernel configuration audit and refresh. This is the start of the
3.4 kernel configuration policy update and includes a refresh / update
with respect to kernel.org defaults and new categorization of
configuration fragments.
0f6975b Sched: Import base BFS-423 for v3.4 c517c5c cfg: strip off redundant path prefixes 689fd20 cfg: create timer subdir for HZ and HPET related settings 5367b46 cfg: add a fs dir for filesystem related configs 67a784b x86/x86_64: disable MTRR sanitizer 5da51ea x86/x86_64: consolidate ACPI and EFI settings 7627402 x86/x86_64: enable CONFIG_NO_HZ=y by default. 9ca6026 mips: select HZ=100 by default. 149efc6 arm: select HZ=100 by default. 29c9fc7 x86/x86_64: use HZ=1000 700b8b5 x86/x86_64: enable boot mem corruption checks; align with korg defaults bbd054d x86: enable CONFIG_HIGHPTE=y by default. 2569871 x86: align to korg defconfig on IRQ fixups and microcode ec5cdc2 x86/x86_64: enable SMP by default b9932fa cfg: relocate/add a frag for HPET / RTC enablement f9645f5 8250: separate out the 8250 configuration from feature dir 5e8fea0 bsp: tie cfg/x86.scc into all "KARCH i386" boards 4020ade cfg: make a common landing ground for ARCH=x86 e126316 cfg: add basic HZ fragments 4a8627b cfg: delete instances of any reference to dmesg buf size. 0794c16 routerstationpro: lib/kobject_uevent: switch to uevent_sock_mutex
[YOCTO #1694]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Fri, 15 Jun 2012 19:26:44 +0000 (15:26 -0400)]
kern-tools: add buildall and robustness fixes
Updating the kern-tools SRCREV to pickup the following functionality:
- buildall: provides the ability to build all kernel branches
without a build system, only a cross compiler and configme
are required.
- robustness/cleanups: obselete/unused code removal and general robustness
fixes from Paul Gortmaker and Bruce Ashfield
The following kern-tools commits are part of this series:
b8dfd3d buildall: add whitelist/blacklist support 0ef039c configme: catch errors found during fragment sanitization 5b6498c buildall: remove all instances of it using/reading scc files 2e57550 buildall: support semi seamless restarts 4b5dd4d kconf_check: simplify cmdline args, dont store data per branch 58fbb6e configme: relieve it of all knowledge of scc files a03e291 configme: strip out alternative meta series logic. 96d2bcf kgit-init: check for valid branchpoint 5598db6 buildall: allow a max cap on the number of builds done b46abec buildall: add support for randomizing build order 68a04e9 buildall: dont copy failed build logs into main build dir 5575d85 buildall: script to independently build all board kernels 86d6200 configme: delete unused variable 8d4e29d configme: delete unused KPROFILE setting 7e15436 configme: ensure we have a valid machine type set 152b9cb scc: remove depreciated/unused commands bb4e96a scc: allow includes within conditional statements 7da7951 configme: derive path to tools from $0 152dc45 configme: test for BUILD_DIR != "" 129f7b0 kgit-scc: add warnings about bad input args. e977662 kgit-scc: add text for no arg and invalid arg case.
[YOCTO #843]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Andrea Adami [Thu, 21 Jun 2012 22:57:03 +0000 (00:57 +0200)]
mtd-utils: do not stage headers in sysroot
* Headers are included in the package for compatibility
* but have not yet been synched with linux 3.0
* The actual issue was that ubi-user.h in sysroot
* was overwritten by the older version.
* Unfortunately one ioctl was renamed:
* http://lists.infradead.org/pipermail/linux-mtd/
* 2011-March/034419.html
* Note: the recipe will still use its own older header,
* following upstream.
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Khem Raj [Thu, 21 Jun 2012 22:44:48 +0000 (15:44 -0700)]
qemu.inc: Fix packageconfig options
--{en|dis}able-gl-accel is spcefic to gl
patches in 0.15.1 which may not be available
for other qemu's so if someone chooses to remove
gl from PACKAGECONFIG then we dont explicitly
use the --disable-gl-accel option since this
wont be recognised by configure.
Darren Hart [Fri, 15 Jun 2012 21:44:24 +0000 (14:44 -0700)]
cml1.bbclass: Only delay exit if the command fails
Rather than pause for 5 seconds, test the return code of the command and
require user input before exiting on failure. This avoids pausing after
successful command execution as well as possibly not waiting long enough
if the user happens to be doing something else for 5 seconds.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Richard Purdie [Fri, 22 Jun 2012 14:04:27 +0000 (15:04 +0100)]
bitbake.conf/abi_version.conf: Update to use BasicHash signature generator
This switches to use the hash based signature generatior and update
layout_abi to match stamp file layout changes.
Angstrom and Poky did this a while ago. This brings the OE-Core defaults
into line with what is the best common practise at this point. Its been
discussed on the mailing lists and by the TSC at length, this just completes
the transition.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
