Drew Moseley [Wed, 14 May 2014 17:08:38 +0000 (13:08 -0400)]
glib-2.0: Do not use readlink to set target paths.
Do not use readlink to set ABS_GLIB_RUNTIME_LIBDIR when cross
compiling. Doing so causes host paths to potentially pollute the
target. Unfortunately in this case we don't actually convert to
an absolute path.
Yasir-Khan [Wed, 14 May 2014 12:04:53 +0000 (17:04 +0500)]
bluez5: Update the bluetooth.conf
In bluez5, agent interface has been renamed from org.bluez.Agent
to org.bluez.Agent1. Reflect this change in bluetooth.conf to
allow sending of dbus messages to agent interface.
*Resolves no PIN prompt bug while pairing
*Resolves bluetooth keyboard connection problem
Ross Burton [Wed, 14 May 2014 10:13:19 +0000 (11:13 +0100)]
freetype: disable harfbuzz
Freetype has an automatically detected dependency on Harfbuzz, which has a
dependency on Freetype.
To produce deterministic builds and avoid link failures when rebuilding freetype
with harfbuzz present add a PACKAGECONFIG for Harfbuzz and disable it by
default.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Chong Lu [Wed, 14 May 2014 09:29:07 +0000 (17:29 +0800)]
dbus: Update to 1.8.2 version
Upgrade dbus to 1.8.2.
Modify ptest suite to make it enabled on new version.
If systemd in DISTRO_FEATURES, we expect to install dbus systemd
unit files.
Remove unneeded patches since it's included in new version.
Remove unrecognized option: "--with-xml"
[YOCTO #6092]
Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
wic: Extend indirect string connection to support image names and rootfs
The wic command-line param --rootfs-dir gets extended to support
multiple directories and image names. Each '--rootfs-dir' could be
connected using a special string. This special string is a image
name which gets expanded by bitbake to get 'IMAGE_ROOTFS' or
a rootfs-dir path pointing to rootfs directory. Like this:
Koen Kooi [Tue, 13 May 2014 10:16:29 +0000 (12:16 +0200)]
ca-certificates: generate CAfile for -native in do_install
Git-replacement-native needs the generated files in place for https:// URIs:
WARNING: Failed to fetch URL git://github.com/kernelslacker/trinity.git;protocol=https, attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/build/linaro/build/build/downloads/git2/github.com.kernelslacker.trinity.git'...
fatal: unable to access 'https://github.com/kernelslacker/trinity.git/': error setting certificate verify locations:
CAfile: /build/linaro/build/build/tmp-eglibc/sysroots/x86_64-linux/etc/ssl/certs/ca-certificates.crt
CApath: none
ERROR: Function failed: Fetcher failure for URL: 'git://github.com/kernelslacker/trinity.git;protocol=https'. Unable to fetch URL from any source.
ERROR: Logfile of failure stored in: /build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux/trinity/1.3-r0/temp/log.do_fetch.7843
ERROR: Task 1378 (/build/linaro/build/meta-linaro/meta-linaro/recipes-extra/trinity/trinity_1.3.bb, do_fetch) failed with exit code '1'
Signed-off-by: Koen Kooi <koen.kooi@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Tue, 13 May 2014 07:46:27 +0000 (15:46 +0800)]
openssh: fix for CVE-2014-2653
The verify_host_key function in sshconnect.c in the client in OpenSSH 6.6 and
earlier allows remote servers to trigger the skipping of SSHFP DNS RR checking
by presenting an unacceptable HostCertificate.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Tue, 13 May 2014 07:46:26 +0000 (15:46 +0800)]
openssh: fix for CVE-2014-2532
sshd in OpenSSH before 6.6 does not properly support wildcards on
AcceptEnv lines in sshd_config, which allows remote attackers to
bypass intended environment restrictions by using a substring located
before a wildcard character.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joe Slater [Mon, 12 May 2014 18:54:04 +0000 (11:54 -0700)]
qemu: define PACKAGECONFIG[] for ssh2
qemu configure will search for libssh2 if we do not enable or
disable it's use, resulting in non-deterministic builds. We
define PACKAGECONFIG[] to avoid this.
Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Tue, 13 May 2014 02:54:26 +0000 (10:54 +0800)]
gdb: add PACKAGECONFIG for babeltrace
Add PACKAGECONFIG for 'babeltrace' so that we don't have the implicit
dependency which might lead to problems when building images.
As an example of showing what problem we might have without this patch,
see the following steps which would lead to a failure.
1. IMAGE_INSTALL_append = " gdb"
2. bitbake babeltrace
3. bitbake gdb
4. bitbake babeltrace -ccleansstate
5. bitbake core-image-minimal
The rootfs process would fail with the following error message.
error: Can't install gdb-7.7-r0@i586: no package provides babeltrace >= 1.2.1+git0+66c2a20b43
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Petter Mabäcker [Mon, 12 May 2014 13:55:38 +0000 (15:55 +0200)]
eglibc: remove usage of FILESPATH
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder
to bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
If possible try to use any of the default FILESPATH dirs.
Also remove superfluous comment and do minor indentation fix.
Signed-off-by: Petter Mabäcker <petter@technux.se> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Petter Mabäcker [Mon, 12 May 2014 13:55:36 +0000 (15:55 +0200)]
u-boot: remove unused FILESPATH
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
However in u-boot no FILESPATH additions are currently needed so
instead it should be removed.
Signed-off-by: Petter Mabäcker <petter@technux.se> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Petter Mabäcker [Mon, 12 May 2014 13:55:35 +0000 (15:55 +0200)]
python: remove usage of FILESPATH
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the
path. Don't migrate paths that already exist in base FILESPATH to
FILESEXTRAPATHS.
Signed-off-by: Petter Mabäcker <petter@technux.se> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Petter Mabäcker [Mon, 12 May 2014 13:55:32 +0000 (15:55 +0200)]
qemu: remove unused FILESPATH
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
However in nativesdk-qemu-helper no FILESPATH additions are currently needed so
instead it should be removed.
Signed-off-by: Petter Mabäcker <petter@technux.se> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Petter Mabäcker [Mon, 12 May 2014 13:55:31 +0000 (15:55 +0200)]
mesa: remove usage of FILESPATH
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
Also remove unused filespath addition.
Signed-off-by: Petter Mabäcker <petter@technux.se> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Petter Mabäcker [Mon, 12 May 2014 13:55:29 +0000 (15:55 +0200)]
trace-cmd: refactoring recipe
Fixes [YOCTO #4497]
Refactoring recipe to avoid duplicated entries in trace-cmd and
kernelshark bb-files. Also remove usage of FILESPATH and split package
unique patches into separate dirs.
Signed-off-by: Petter Mabäcker <petter@technux.se> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Petter Mabäcker [Mon, 12 May 2014 13:55:28 +0000 (15:55 +0200)]
gstreamer: remove unused FILESPATH
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
However in gstreamer no FILESPATH additions are currently needed so
instead it should be removed.
Signed-off-by: Petter Mabäcker <petter@technux.se> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 12 May 2014 10:04:26 +0000 (11:04 +0100)]
git: Fix various makefile flags
We need to pass CFLAGS and LDFLAGS to the makefile correctly so we
need to list them as part of EXTRA_OEMAKE.
We also have a problem where git hardlinks binaries in bindir with
those in its libexecdir. If we change the RPATH in one of them, it
breaks the other. We therefore set the no cross dir hardlinking flag
git already has for this kind of issue. This ensures the RPATHS for
the git-core binaries works correctly. Its pure luck this has
sometimes worked so far.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 12 May 2014 12:14:47 +0000 (13:14 +0100)]
gst-openmax: fix build with GLib 2.40 onwards
GLib 2.40 adds g_ptr_array_insert, but gst-openmax is definining that as a
static helper function. Rename the static function so it doesn't conflict with
GLib's namespace.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Sun, 11 May 2014 06:48:10 +0000 (08:48 +0200)]
gstreamer1.0-plugins-good: add libxfixes and libxdamange to x11 depends
* fixes following issue in test-dependencies report:
gstreamer1.0-plugins-good/gstreamer1.0-plugins-good-ximagesrc/latest lost dependency on libxdamage
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 9 May 2014 12:29:13 +0000 (13:29 +0100)]
classes/lib/oe: Fix cross/crosssdk references
With the renaming of the cross packages, its no longer possible to use
endswith("-cross") and similar to detect cross packages. Replace these
references with other techniques.
This resolves certain build from sstate failures which were due to the
system believing cross packages were target packages and therefore
dependency handling was altered.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Saul Wold [Fri, 9 May 2014 00:39:22 +0000 (17:39 -0700)]
update-rc.d: Handle multilib case for initscripts
When building multilib, we also have to add the multlib prefix otherwise
we get a WARNING:
WARNING: Multilib QA Issue: lib32-dbus package lib32-dbus - suspicious values 'initscripts-functions' in RDEPENDS
Anders Roxell [Thu, 24 Apr 2014 22:09:05 +0000 (17:09 -0500)]
rt-tests: bump version 0.87 => 0.89
cyclictest was updated to correct some problems with CPU affinity selection
and display of help and/or execution details.
These patches were accepted by the maintainer of the cyclictest utility.
The changes were reflected in an updated release of rt-tests - v0.89
The cyclictest changes were successfully tested on both an ARM v7 and x86_64
host environment.
The OE recipe was updated locally to incorporate the newer rt-tests release
and the resulting builds were verified for the same ARM v7 target
and for qemux86.
Patch files obsoleted by the rt-tests 0.89 release were removed from the recipe
deleted: meta/recipes-rt/rt-tests/files/0001-rt-tests-Allow-for-user-specified-PYLIB.patch
deleted: meta/recipes-rt/rt-tests/files/0002-rt-tests-Break-out-install_hwlatdetect.patch
deleted: meta/recipes-rt/rt-tests/files/added-missing-dependencies.patch
Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Gary S. Robertson <gary.robertson@linaro.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Matt Cowell [Thu, 17 Apr 2014 19:23:13 +0000 (14:23 -0500)]
chrpath: properly handle rootdir with '..' in path
When there is a '..' in the rootdir path, rootdir will not be a substring of
fpath. This causes an incorrect rpath of the difference between the workdir
and the sysroot to be computed, which is incorrect. Normalizing basedir
fixes this issue.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Wed, 7 May 2014 16:05:33 +0000 (17:05 +0100)]
libxcb: disable check to avoid floating dependencies
The "check" module is checked for in configure without any way to explicitly
enable or disable it, but it isn't a build dependency of libxcb. If it's found
libxslt is also checked for, which is a build dependency but will only be used
if check is also present.
As the libxcb unit test suite is minimal at present, forcibly disable the test
for check and remove the libxslt-native build dependency.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Thu, 8 May 2014 08:31:52 +0000 (16:31 +0800)]
util-linux: fix parallel build issure for PATHFILES
When compiling util-linux, it's possible to encounter the following error.
/bin/sh: line 2:: misc-utils/uuidd.8.tmp: No such file or directory
This is because that the misc-utils directory doesn't exist when trying to
write to misc-utils/uuidd.8.tmp.
When generating misc-utils/uuidd.8 (or anything in PATHFILES), its directory
may not have been created yet. So we need to ensure the existence of the
directory to avoid the compilation error.
[YOCTO #6292]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changhyeok Bae [Thu, 8 May 2014 03:44:04 +0000 (12:44 +0900)]
mirrors.bbclass: Add mirror site for savannah
* The SRC_URI is not accessible.
So need to add mirror site referred by the original site.
* The problem is that
http://download.savannah.gnu.org/releases redirects to closest mirror
and few mirrors (e.g. .jp) weren't working correctly while
http://download-mirror.savannah.gnu.org/releases/ seems to be reliable.
* Add SAVANNAH_GNU_MIRROR and SAVANNAH_NONGNU_MIRROR variable in bitbake.conf.
* Change the SRC_URI using the new variable.
Signed-off-by: Changhyeok Bae <changhyeok.bae@lge.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 6 May 2014 12:50:55 +0000 (12:50 +0000)]
attr: Fix uclibc builds
attr needs libintl headers and libs. Add in the missing dependency and
ensure the linker flag gets passed in multilib builds by replacing the
PN == BPN check with a class-target override instead.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Maxin B. John [Wed, 7 May 2014 12:24:15 +0000 (14:24 +0200)]
libxml2: fix CVE-2014-0191
It was discovered that libxml2, a library providing support to read,
modify and write XML files, incorrectly performs entity substituton in
the doctype prolog, even if the application using libxml2 disabled any
entity substitution. A remote attacker could provide a
specially-crafted XML file that, when processed, would lead to the
exhaustion of CPU and memory resources or file descriptors.
Function buildhistory_list_installed_image fails with error "Argument
list too long". This patch uses a temporal file to pass the package list
to opkg-query-helper.py
ERROR: Function failed: buildhistory_list_installed_image
ERROR: Logfile of failure stored in: /var/lib/jenkins/jobs/qt5022-cesium/workspace/build/tmp/work/qt5022-poky-linux/qimage-dev/1.0-r0/temp/log.do_rootfs.16747
NOTE: recipe qimage-dev-1.0-r0: task do_rootfs: Failed
ERROR: Task 7 (/var/lib/jenkins/jobs/qt5022-cesium/workspace/repo/yocto/../qtec/meta-qt5022/recipes-core/images/qimage-dev.bb, do_rootfs) failed with exit code '1'
NOTE: Tasks Summary: Attempted 4999 tasks of which 30 didn't need to be rerun and 1 failed.
NOTE: Writing buildhistory
Auto packing the repository for optimum performance.
Summary: 1 task failed:
/var/lib/jenkins/jobs/qt5022-cesium/workspace/repo/yocto/../qtec/meta-qt5022/recipes-core/images/qimage-dev.bb, do_rootfs
Summary: There were 74 WARNING messages shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
Petter Mabacker [Tue, 6 May 2014 14:03:12 +0000 (16:03 +0200)]
x-load: remove recipe
x-load has been superseded by u-boot SPL for all cortex based TI SoCs.
For legacy boards meta-ti layer (that contains a maintained recipe)
should be used instead.
Richard Purdie [Tue, 6 May 2014 13:49:50 +0000 (14:49 +0100)]
libiconv: Fix B != S with uclibc builds
Without this, uclibc builds fail with libtool version mismatches. The issue
is that we need to remove the files in ${S}, not ${B} which is now
the default after the B != S change.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Richard Purdie [Tue, 6 May 2014 13:48:37 +0000 (14:48 +0100)]
ptest: Work from PTEST_ENABLED, not DISTRO_FEATURES
Some classes of recipe disable ptest even though its in DISTRO_FEATURES
(e.g. nativesdk). We shouldn't attempt to build ptest packages when
its disabled. This replaces some DISTRO_FEATURE checks with PTEST_ENABLED
checks instead.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Chen Qi [Tue, 6 May 2014 07:53:12 +0000 (15:53 +0800)]
mmc-utils: fix compilation failure for mips64 target.
This patch fixes mmc-utils compilation failure for qemumips64.
Remove the 'include <asm-generic/int-ll64.h>' line from mmc.h,
because this file is automatically included if _MIPS_SZLONG
is not 64, otherwise, <asm-generic/int-l64.h> is included.
Expicitly including <asm-generic/int-ll64.h> will cause the
compilation failure for mips64 target.
Maxin B. John [Tue, 6 May 2014 00:53:34 +0000 (02:53 +0200)]
openssl: fix CVE-2014-0198
A null pointer dereference bug was discovered in do_ssl3_write().
An attacker could possibly use this to cause OpenSSL to crash, resulting
in a denial of service.
Tyler Hall [Mon, 5 May 2014 00:06:43 +0000 (20:06 -0400)]
python3: Revert python-config to distutils.sysconfig
The newer sysconfig module shares some code with distutils.sysconfig,
but the same modifications as in
12-distutils-prefix-is-inside-staging-area.patch
makes distutils.sysconfig affect the native runtime as well as cross
building. Use the old, patched implementation which returns paths in
the staging directory and for the target, as appropriate.
This change reverts this upstream patch
http://hg.python.org/cpython/diff/712970b019f7/Misc/python-config.in
Signed-off-by: Tyler Hall <tylerwhall@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Tyler Hall [Sun, 4 May 2014 22:37:50 +0000 (18:37 -0400)]
python3: Substitute correct python version in shebang
If python2 and python3 are both available, scripts that are subject to
this substitution can possibly run with the wrong python version.
python3-config is one such script.
Signed-off-by: Tyler Hall <tylerwhall@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Radek Dostal [Mon, 5 May 2014 07:38:22 +0000 (09:38 +0200)]
distutils.bbclass: only modify *.py file if it contains path to be removed
Currently sed command touches every single *.py file. This modifies the
timestamp of the file. All *.pyo files will be recompiled during the first
boot, because timestamp will not match. This should be only necessary if
sed command changes the file.
Signed-off-by: Radek Dostal <radek.dostal@streamunlimited.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Now that gcc-cross, gcc-crosssdk and others have expanded variables in
their names, the code that previous just applied to cross-canadian needs
expanding to cover the other cases. Improve the conditional and also
fix a bug where the multilib prefix wasn't being added into the generated
versions.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Tue, 6 May 2014 07:32:50 +0000 (00:32 -0700)]
tcmode-default.inc: Adjust for new toolchain component changes
Recently we renames the cross compilers as well as spun out
libgcc-initial from gcc-initial out. We need to also express
it in default tcmode otherwise defining GCCVERSION and/or BINUVERSION
outside OE-Core does not cover all cases
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Updated copyright years for radeon firmware;
- Changed copyright terms (privilege of use) for qla2xxx firmware;
- Changed Broadcom firmware name for SDIO;
- Added TI wl18xx firmware package.
