Kevin Hao [Tue, 14 Jul 2020 00:53:23 +0000 (08:53 +0800)]
wic/filemap: Fall back to standard copy when no way to get the block map
For some filesystems, such as aufs which may be used by docker container,
don't support either the SEEK_DATA/HOLE or FIEMAP to get the block
map. So add a FileNobmap class to fall back to standard copy when there
is no way to get the block map.
[Yocto #12988]
Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 13 Jul 2020 15:44:28 +0000 (16:44 +0100)]
perf: add PACKAGECONFIG for CoreSight support
meta-arm has a recipe for OpenCSD, the CoreSight Trace Decoder library,
so add a PACKAGECONFIG so that users can enable the use of CoreSight in
perf builds.
Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 10 Jul 2020 08:53:39 +0000 (09:53 +0100)]
qemurunner: Ensure pid location is deterministic
The pid location could vary due to changes in cwd as only a filename
is specified, not a full path. This in theory could be resulting in
some of our autobuilder failures. Whilst its difficult to know if this
is causing a problem, Using a full path removes any question of such an
issue.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Python now expects regex strings to be prepended with r.
Silence pylint/autopep8 and similar warnings by identifying
these regex patterns as... regex patterns.
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tim Orling [Sat, 11 Jul 2020 03:48:07 +0000 (20:48 -0700)]
lib/oe/recipeutils.py: add AUTHOR; BBCLASSEXTEND
If you try to create a plugin for recipetool that
adds the AUTHOR field, it is impossible to put it
in the recommended position [1] without adding to the
recipe_progression variable.
While we are at it, also add BBCLASSEXTEND at the
end, as also recommended by [1].
[1] http://www.openembedded.org/wiki/Styleguide
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
nfs-utils configure searches for rpcgen tool only in default locations:
"/usr/local/bin/rpcgen /usr/bin/rpcgen /bin/rpcgen".
On some of our build machines the rpcgen is not present there and
configure fails:
| configure: error: Please install rpcgen or use --with-rpcgen
HOSTTOOLS_DIR already contains a correct pointer to host rpcgen tool, so
use it from there.
Signed-off-by: Taras Kondratiuk <takondra@cisco.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yongxin Liu [Fri, 10 Jul 2020 08:39:22 +0000 (16:39 +0800)]
linux-firmware: move ibt-misc to the end of ibt packages
After commit 3ca1d3fa1d ("linux-firmware: fix the wrong file
path for ibt-misc"), if we don't change the location of ibt-misc
in PACKAGES, ibt-misc will include all ibt files and make other
individual ibt package empty.
Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
u-boot.inc and busybox.inc contain identical copies of this little
helper. They both inherit the cml1 class and use cml1_do_configure
right after having used this helper, and other recipes that want to
write similar logic for doing Kconfig via fragments will also need it
or something equivalent.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Arthur She [Thu, 9 Jul 2020 02:13:28 +0000 (19:13 -0700)]
igt-gpu-tools: Add PACKAGECONFIG for Chamelium support
Chamelium is a hardware device that can be used for external display
test automation [1].
It is disabled by default and can be turned on through PACKAGECONFIG.
Charlie Davies [Thu, 9 Jul 2020 19:22:08 +0000 (20:22 +0100)]
u-boot: fix condition to allow use of *.cfg
U-boot recipe supports .cfg files in SRC_URI, but bug in conditional
statement meant that the code was unreachable and the .cfg files
were never applied.
Signed-off-by: Charlie Davies <charles.davies@whitetree.xyz> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After ccache upgrade to 3.7.10, there comes below error when
enable ccache to build python3 and check [1] and [2] for more
details.
| Python-3.8.3/Modules/_contextvarsmodule.c:43:1: error: source locations for function 'PyInit__contextvars' have changed, the profile data may be out of date [-Werror=coverage-mismatch]
That's because the logic for profile directory changes a little in
[3] after ccache upgrades to 3.7.10.
So define a profile directory path accordingly to fix the above error.
For SDK environments where people still use subversion, let it easily being
added to buildtools-tarball to invite more developers relying on Yocto
based SDKs without much requirement to setup anything on the development
workplace.
Signed-off-by: Jens Rehsack <sno@netbsd.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- libblkid is exclusively licensed under LGPL-2.1+ (libblkid/COPYING)
- libfdisk is exclusively licensed under LGPL-2.1+ (libfdisk/COPYING)
- libmount is exclusively licensed under LGPL-2.1+ (libmount/COPYING)
- libsmartcols is exclusively licensed under LGPL-2.1+
(libsmartcols/COPYING)
- libuuid is exclusively licensed under BSD-3-Clause (libuuid/COPYING)
Signed-off-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
According to the PACKAGES variable, LICENSE_avahi-client is misspelled.
Additionally, the libavahi-client package actually only includes
LGPLv2.1+ software (as opposed to the global LICENSE variable).
Signed-off-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gnutls: Fix krb5 code license to GPLv2.1+ to match the LICENSE file.
This was discussed and accepted upstream by the project so their license is consistent.
Please reference to https://gitlab.com/gnutls/gnutls/-/issues/1018
and https://gitlab.com/gnutls/gnutls/-/merge_requests/1285.
Signed-off-by: Zheng Ruoqin <zhengrq.fnst@cn.fujitsu.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Tue, 7 Jul 2020 20:37:42 +0000 (21:37 +0100)]
insane: consolidate skipping of temporary do_package files
During the course of do_package_rpm and friends the tools create a
top-level CONTROL or DEBIAN directory in the package directory.
do_package_qa needs to be aware of these files and ignore them, this was
previously done in just one check but instead should be done once when
building the file list so all the checks don't see the temporary files.
[ YOCTO #13804 ]
Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 7 Jul 2020 13:13:18 +0000 (14:13 +0100)]
adwaita-icon-theme: Add missing license files to LIC_FILES_CHKSUM
The sources have a couple of COPYING files which should be listed
in the license checksum entry so the full license terms are included
in license handling code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hannu Lounento [Tue, 7 Jul 2020 11:05:46 +0000 (14:05 +0300)]
openssl: move ${libdir}/[...]/openssl.cnf to ${PN}-conf
Some openssl command line operations like creating an X.509 CSR require
the file /usr/lib/ssl-1.1/openssl.cnf to exist and fail if it doesn't
root@qemux86-64:~# openssl req -out my.csr -new -newkey rsa:2048 -nodes -keyout my.key
Can't open /usr/lib/ssl-1.1/openssl.cnf for reading, No such file or directory 140289168594176:error:02001002:system library:fopen:No such file or directory:../openssl-1.1.1g/crypto/bio/bss_file.c:69:fopen('/usr/lib/ssl-1.1/openssl.cnf','r') 140289168594176:error:2006D080:BIO routines:BIO_new_file:no such file:../openssl-1.1.1g/crypto/bio/bss_file.c:76:
which is the case e.g. in core-image-minimal with just the
package openssl-bin added to the image by declaring
IMAGE_INSTALL_append = " openssl-bin"
e.g. in local.conf.
The file did not exist in the aforementioned image / configuration
because it was packaged to the main openssl package
FILES_${PN} =+ "${libdir}/ssl-1.1/*"
(there is no other FILES specification that would match the file either)
and
Hence move /usr/lib/ssl-1.1/openssl.cnf (and openssl.cnf.dist as it
seems closely related) to the ${PN}-conf package to have it installed
with ${PN}-bin, which already (indirectly) depends on ${PN}-conf.
Note that the openssl recipe has the comment
Add the openssl.cnf file to the openssl-conf package. Make the libcrypto
package RRECOMMENDS on this package. This will enable the configuration
file to be installed for both the openssl-bin package and the libcrypto
package since the openssl-bin package depends on the libcrypto package.
but openssl-conf only contained /etc/ssl/openssl.cnf
/usr/lib/ssl-1.1/openssl.cnf is actually only a symlink that points to
../../../etc/ssl/openssl.cnf.
Other files and directories in /usr/lib/ssl-1.1/ were considered as well
because they seem to be configuration files and / or related to
(symlinks pointing to) /etc. They were not moved though, because based
on our use case and testing moving the openssl.cnf symlink is sufficient
for fixing the immediate problem and we lack knowledge about the other
files in order to make a decision to change their packaging.
Signed-off-by: Hannu Lounento <hannu.lounento@vaisala.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
coreutils: don't split stdbuf to own package with single-binary
Commit 992cec44 (coreutils: Move stdbuf into an own package
coreutils-stdbuf) breaks package-qa when the single-binary
PACKAGECONFIG is used:
ERROR: coreutils-8.32-r0 do_package_qa: QA Issue: /usr/bin/stdbuf contained in package coreutils-stdbuf requires /usr/bin/coreutils, but no providers found in RDEPENDS_coreutils-stdbuf? [file-rdeps]
ERROR: coreutils-8.32-r0 do_package_qa: QA run found fatal errors. Please consider fixing them.
With that PACKAGECONFIG, /usr/bin/stdbuf is just a simple "script"
containing the single line
Since there's no point splitting stdbuf to its own package when all
the functionality is in the single big coreutils binary anyway, fix
this by not creating the separate stdbuf package for the single-binary
case. But also make sure that the coreutils-stdbuf item always exists
so recipes can always RDEPEND on coreutils-stdbuf.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rahul Kumar [Thu, 25 Jun 2020 13:11:27 +0000 (18:41 +0530)]
bzip2: Add test suite for bzip2
Source: git://sourceware.org/git/bzip2-tests.git
Type: Enhancement
Description:
bzip2 now has a test suite available at git://sourceware.org/git/bzip2-tests.git.
This is a collection of "interesting" .bz2 files that can be used to
test bzip2 works correctly. They come from different projects.
Some files are deliberately bad, and are use to see how bzip2 handles
corrupt files. They are explicitly not intended to decompress correctly,
but to catch errors in bzip2 trying to deal with deliberately bad data.
All such files have a name ending in .bz2.bad.
All non-bad files end in bz2. And should come with a .md5 file for
the original input file. The .md5 file is used to check that bzip2
could correctly decompress the file. The original (non-compressed)
files are deliberately not checked in.
It will by default test with the command 'bzip2', running under
valgrind (if installed on the system).
For each .bz2 file found it is decompressed, recompressed and
decompressed again. Once with the default bzip2 settings and
once in --small (-s) mode.
For each .bz2.bad file decompression is tried twice also. In
default mode and small mode. The bzip2 binary is expected to
return either 1 or 2 as exit status. Any other exit code is
interpreted as failure.
License:
In bzip2-tests source code Each directory should contain a README
file explaining where the .bz2 files originally came from.
Plus a reference to the (Free Software) license that the project
files were distributed under.
Test Summery:
On qemux86-64/kvm the ptest results with extra filesystem space (atleast 114688) are:
Bruce Ashfield [Mon, 6 Jul 2020 16:27:04 +0000 (12:27 -0400)]
linux-yocto/5.4: update to v5.4.50
Updating linux-yocto/5.4 to the latest korg -stable release that comprises
the following commits:
e75220890bf6 Linux 5.4.50 a160afebd779 Revert "tty: hvc: Fix data abort due to race in hvc_open" ffd40b7962d4 xfs: add agf freeblocks verify in xfs_agf_verify cc66553004f4 dm writecache: add cond_resched to loop in persistent_memory_claim() a51e71cbf6e6 dm writecache: correct uncommitted_block when discarding uncommitted entry de1d70dad6f2 xprtrdma: Fix handling of RDMA_ERROR replies 4d35ca872ac3 NFSv4 fix CLOSE not waiting for direct IO compeletion 02917bef8f1b pNFS/flexfiles: Fix list corruption if the mirror count changes 7b99577ff376 SUNRPC: Properly set the @subbuf parameter of xdr_buf_subsegment() c27d205baa82 sunrpc: fixed rollback in rpc_gssd_dummy_populate() 60bdb51d44fa Staging: rtl8723bs: prevent buffer overflow in update_sta_support_rate() c6f88afa6ae1 drm/amdgpu: add fw release for sdma v5_0 05124abe1fb0 drm/radeon: fix fb_div check in ni_init_smc_spll_table() 834a3aa2ceb4 drm: rcar-du: Fix build error 176a3c488476 drm/amd: fix potential memleak in err branch 0b3cc973f16f ring-buffer: Zero out time extend if it is nested and not absolute 9a59a88b3d31 tracing: Fix event trigger to accept redundant spaces c036eb65fdfc arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range 90bd9c611f21 arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range 73f79b420bd0 arm64: perf: Report the PC value in REGS_ABI_32 mode 7a9e3e25a9d2 mm/memcontrol.c: add missed css_put() ff6aff13a8cf ocfs2: fix panic on nfs server over ocfs2 a8d82ebaee97 ocfs2: fix value of OCFS2_INVALID_SLOT 4685df862c8b ocfs2: load global_inode_alloc 7fa716a594a6 ocfs2: avoid inode removal while nfsd is accessing it fbca1aee1397 mm/slab: use memzero_explicit() in kzfree() a79c3a99ac81 btrfs: fix failure of RWF_NOWAIT write into prealloc extent beyond eof 863a197f7f10 btrfs: check if a log root exists before locking the log_mutex on unlink 53a081661047 btrfs: fix data block group relocation failure due to concurrent scrub 0a4dfc69ea7e btrfs: fix bytes_may_use underflow when running balance and scrub in parallel df13086490db x86/asm/64: Align start of __clear_user() loop to 16-bytes 3ceaf206b706 x86/cpu: Use pinning mask for CR4 bits needing to be 0 96a80133559f KVM: VMX: Stop context switching MSR_IA32_UMWAIT_CONTROL 8ccc6ac51eac KVM: nVMX: Plumb L2 GPA through to PML emulation 5774f9fa563b KVM: X86: Fix MSR range of APIC registers in X2APIC mode 0236040fcf97 erofs: fix partially uninitialized misuse in z_erofs_onlinepage_fixup 824d0b6225f3 ACPI: configfs: Disallow loading ACPI tables when locked down 3c4f9a5541bb ACPI: sysfs: Fix pm_profile_attr type 6ee4d61403d2 ALSA: hda/realtek: Add mute LED and micmute LED support for HP systems 1a1bc3ae6935 ALSA: hda/realtek - Add quirk for MSI GE63 laptop 0211e0d7f185 ALSA: hda: Add NVIDIA codec IDs 9a & 9d through a0 to patch table f06a6294e113 RISC-V: Don't allow write+exec only page mapping request in mmap 26b0956cb374 block: update hctx map when use multiple maps 72647ea37700 blktrace: break out of blktrace setup on concurrent calls d14eb5d8f0f4 kprobes: Suppress the suspicious RCU warning on kprobes 8ed391a3dbc4 recordmcount: support >64k sections 803d114e8f19 kbuild: improve cc-option to clean up all temporary files cbed4eb0a92f arm64: sve: Fix build failure when ARM64_SVE=y and SYSCTL=n a9a3b33b20aa s390/vdso: fix vDSO clock_getres() 68a3cbc44660 s390/vdso: Use $(LD) instead of $(CC) to link vDSO 7c17909a889d s390/ptrace: fix setting syscall number 64f7b10a91a4 s390/ptrace: pass invalid syscall numbers to tracing 453cfe187723 pinctrl: tegra: Use noirq suspend/resume callbacks 7851257375ae pinctrl: qcom: spmi-gpio: fix warning about irq chip reusage 8dba9173a37a test_objagg: Fix potential memory leak in error handling 6fd916e24935 net: alx: fix race condition in alx_remove 855dbf10c9a7 ibmvnic: Harden device login requests 07b8b2d46371 hwrng: ks-sa - Fix runtime PM imbalance on error b8403f7e45e5 riscv/atomic: Fix sign extension for RV64I 81616542adcc drm/amd/display: Use kfree() to free rgb_user in calculate_user_regamma_ramp() f7f181582f1b ata/libata: Fix usage of page address by page_address in ata_scsi_mode_select_xlat function 4dfc238a2441 sata_rcar: handle pm_runtime_get_sync failure cases 83bdf7f8b712 sched/core: Fix PI boosting between RT and DEADLINE tasks 3dc7138943b1 sched/deadline: Initialize ->dl_boosted bfd4981fe3d6 afs: Fix storage of cell names 5cee9e67596f i2c: core: check returned size of emulated smbus block read 4a6e6413059e i2c: fsi: Fix the port number field in status register 0935afc39797 clk: sifive: allocate sufficient memory for struct __prci_data b78bae5ab399 net: bcmgenet: use hardware padding of runt frames ae6d80f62c73 netfilter: ipset: fix unaligned atomic access 8d93603bf60c nvme: don't protect ns mutation with ns->head->lock f9dc5e708ab8 usb: renesas_usbhs: getting residue from callback_result 56ee0ed97df5 usb: gadget: udc: Potential Oops in error handling code a3a86515d017 scsi: lpfc: Avoid another null dereference in lpfc_sli4_hba_unset() 1e812023f478 ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram() 61f488765dff cxgb4: move handling L2T ARP failures to caller 065f225ef975 net: qede: fix use-after-free on recovery and AER handling f490e70fa7eb net: qede: fix PTP initialization on recovery 7180c8fc4a03 net: qed: fix excessive QM ILT lines consumption 32cf4ff4ec52 net: qed: fix NVMe login fails over VFs d0717a95a06b net: qede: stop adding events on an already destroyed workqueue 164d9a15652f net: qed: fix async event callbacks unregistering 5cf7f0c68405 net: qed: fix left elements count calculation 33104571648b iommu/vt-d: Update scalable mode paging structure coherency ede796e5ac87 iommu/vt-d: Enable PCI ACS for platform opt in hint 67db9e032b6e selftests/net: report etf errors correctly 34f45567462d RDMA/mad: Fix possible memory leak in ib_mad_post_receive_mads() d3edf648f398 s390/qeth: fix error handling for isolation mode cmds 9e89c2d5da87 ASoC: rockchip: Fix a reference count leak. 4aeb21584e55 RDMA/cma: Protect bind_list and listen_list while finding matching cm id f0078dc6750f RDMA/qedr: Fix KASAN: use-after-free in ucma_event_handler+0x532 66143ecb9e3c RDMA/rvt: Fix potential memory leak caused by rvt_alloc_rq d6fb7f457456 rxrpc: Fix handling of rwind from an ACK packet 73cff44e66e3 ARM: dts: NSP: Correct FA2 mailbox node f1ee7d3a2c1a bpf: Don't return EINVAL from {get,set}sockopt when optlen > PAGE_SIZE 0f3aa6c6d6ad devmap: Use bpf_map_area_alloc() for allocating hash buckets b93df0f6d7cd regmap: Fix memory leak from regmap_register_patch 5f6b834e110b x86/resctrl: Fix a NULL vs IS_ERR() static checker warning in rdt_cdp_peer_get() 99ab61cc8b75 ARM: dts: Fix duovero smsc interrupt for suspend 07f7c547698b ARM: dts: am335x-pocketbeagle: Fix mmc0 Write Protect d909f9db0caa bpf, xdp, samples: Fix null pointer dereference in *_user code 0608288c6caa samples/bpf: xdp_redirect_cpu: Set MAX_CPUS according to NR_CPUS b59ed5668c4e ASoC: fsl_ssi: Fix bclk calculation for mono channel 3947dd237ef5 RDMA/siw: Fix pointer-to-int-cast warning in siw_rx_pbl() 34f105349369 regualtor: pfuze100: correct sw1a/sw2 on pfuze3000 1fa27418054f ASoC: qcom: common: set correct directions for dailinks 47c7ae0ca9d7 ASoc: q6afe: add support to get port direction 92444a57e365 efi/esrt: Fix reference count leak in esre_create_sysfs_entry. 8c236ac4376a efi/tpm: Verify event log header before parsing e50cf858d118 ASoC: q6asm: handle EOS correctly 41b2debf35ef xfrm: Fix double ESP trailer insertion in IPsec crypto offload. 475a7b09b4bb ARM: OMAP2+: Fix legacy mode dss_reset 527ddb339d6b bus: ti-sysc: Ignore clockactivity unless specified as a quirk 1f5197a5ad97 bus: ti-sysc: Flush posted write on enable and disable 21d511c6c9c2 IB/hfi1: Fix module use count flaw due to leftover module put calls 2a4c0bf5c70e IB/mad: Fix use after free when destroying MAD agent 588ad2b29ea3 loop: replace kill_bdev with invalidate_bdev d9a74e455070 cdc-acm: Add DISABLE_ECHO quirk for Microchip/SMSC chip d6522bc320d7 xhci: Return if xHCI doesn't support LPM 14d46386226e xhci: Fix enumeration issue when setting max packet size for FS devices. c09be4f57956 xhci: Fix incorrect EP_STATE_MASK e615f58fa86c cifs/smb3: Fix data inconsistent when zero file range bd2f2ac0ab96 cifs/smb3: Fix data inconsistent when punch hole 572a11131ad3 cifs: Fix cached_fid refcnt leak in open_shroot 1f551a056b30 scsi: zfcp: Fix panic on ERP timeout for previously dismissed ERP action d3a251b84797 scsi: qla2xxx: Keep initiator ports after RSCN be8df027079b usb: cdns3: ep0: add spinlock for cdns3_check_new_setup a0668653be26 usb: cdns3: ep0: fix the test mode set incorrectly 79175ae5f996 usb: cdns3: trace: using correct dir value 25e1bb1e6c36 ALSA: usb-audio: Fix OOB access of mixer element list 1cc2d29710c2 ALSA: usb-audio: add quirk for Samsung USBC Headset (AKG) 0c4ff206043e ALSA: usb-audio: add quirk for Denon DCD-1500RE 74a7ad9d975c ALSA: usb-audio: Add implicit feedback quirk for SSL2+. 895ec8c86e13 usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangs fe2daefad98a usb: host: ehci-exynos: Fix error check in exynos_ehci_probe() c1e71a51c2f5 xhci: Poll for U0 after disabling USB2 LPM 9d814bd14cff usb: host: xhci-mtk: avoid runtime suspend when removing hcd 9200037a6ab6 USB: ehci: reopen solution for Synopsys HC bug ffeb58a0daf0 usb: add USB_QUIRK_DELAY_INIT for Logitech C922 6b3eb8af48cb usb: dwc2: Postponed gadget registration to the udc class driver 195c1d1dd8cf USB: ohci-sm501: Add missed iounmap() in remove 2274a7421e73 binder: fix null deref of proc->context 3621616af99b ALSA: usb-audio: Fix potential use-after-free of streams 335add4ac891 fix a braino in "sparc32: fix register window handling in genregs32_[gs]et()" 32e5a15f1084 net: sched: export __netdev_watchdog_up() 9d3d40ec7dee btrfs: fix a block group ref counter leak after failure to remove block group 8ae850cddf27 Revert "i2c: tegra: Fix suspending in active runtime PM state" 052a7fdd86fb tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT 942315134313 sch_cake: fix a few style nits b1aa7e5fa163 sch_cake: don't call diffserv parsing code when it is not needed ea2628dd586d sch_cake: don't try to reallocate or unshare skb unconditionally 3c6208267218 ip_tunnel: fix use-after-free in ip_tunnel_lookup() 9baf076d797f net: phy: Check harder for errors in get_phy_id() 568c5aaf6c2d ip6_gre: fix use-after-free in ip6gre_tunnel_lookup() 35db638692db tg3: driver sleeps indefinitely when EEH errors exceed eeh_max_freezes fe3a5d8fc372 tcp: grow window for OOO packets only for SACK flows cb22ce3346f2 tcp: don't ignore ECN CWR on pure ACK dc43f7e807a8 sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket fea864489c90 rxrpc: Fix notification call on completion of discarded calls 6956830cf981 rocker: fix incorrect error handling in dma_rings_init a908f986ddf7 openvswitch: take into account de-fragmentation/gso_size in execute_check_pkt_len 27b70214fc69 net: usb: ax88179_178a: fix packet alignment padding 67571b1ab296 net: increment xmit_recursion level in dev_direct_xmit() 97a1d2aa6cdd net: Fix the arp error in some cases 742f2358b324 net: fix memleak in register_netdevice() 9e693934cd59 net: Do not clear the sock TX queue in sk_set_socket() 9f217d6dd796 net: core: reduce recursion limit value f32325b100ea net: bridge: enfore alignment for ethernet address 57a976e676e1 mvpp2: ethtool rxtx stats fix fa0d7e09da1d mld: fix memory leak in ipv6_mc_destroy_dev() 009b3e294a90 ibmveth: Fix max MTU limit f060107ccc97 geneve: allow changing DF behavior after creation ce06fcb6a66d enetc: Fix tx rings bitmap iteration range, irq handling b90ca32531bf block/bio-integrity: don't free 'buf' if bio_integrity_add_page() failed
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 6 Jul 2020 11:57:07 +0000 (12:57 +0100)]
gtk+3: fix reproducible build failure
There's a build race between the use of a pre-generated file and
re-generating it again, which breaks reproducible builds. Solve the
race by deleting the shipped generated file.
Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Vacek, Patrick [Mon, 6 Jul 2020 10:34:46 +0000 (10:34 +0000)]
oeqa/core/loader: fix regex to include numbers
The previous version only included the numbers 1 and 2 in the allowed characters
for the module name. In the past, this was (\w+) so all numbers were allowed.
Now it explicitly includes all numbers again.
Signed-off-by: Patrick Vacek <patrickvacek@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
baremetal-image.bbclass: Create a class for baremetal applications or an RTOS
Baremetal applications or an RTOS built with OpenEmbedded can share the same
code to be built as an image, tested and packaged in case they can be updated
as a firmware blob from Linux.
This class creates the proper wiring to mimic OE Linux image creation and
testing infrastructure, inheriting it makes the process of creating a baremetal
application transparent to the developer deploying it automatically along with
its required bits to be run and tested.
Signed-off-by: Alejandro Hernandez Samaniego <alejandro@enedino.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Matt Madison [Sun, 5 Jul 2020 13:44:32 +0000 (06:44 -0700)]
kernel.bbclass: add gzip-native to do_deploy dependencies
When a modules tarball is created during kernel_do_deploy,
the tarball is compressed using gzip, but gzip-native is not
a dependency so the build host's gzip is being used for this.
Using gzip-native will, by default, use pigz instead of
single-threaded gzip, making this task less of a bottleneck
for builds with a large modules package.
Signed-off-by: Matt Madison <matt@madison.systems> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
kernel/yocto: fix search for defconfig from src_uri
Fetcher provides full paths to defconfig and scc files, which awk
comparison operator does not catch during construction of
src_uri_defconfig and sccs_from_src_uri lists. This causes the
src_uri_defconfig variable to come out empty, and fails further
validation if defconfig is only supplied via SRC_URI.
Replace comparison operator with awk match function which searches for
sub-string during filtering, effectively placing defconfig from SRC_URI
into src_uri_defconfig and scc files in sccs_from_src_uri respectively.
Fixes: 23dcff0d396c (kernel/yocto: ensure that defconfigs are processed first) Cc: Bruce Ashfield <bruce.ashfield@gmail.com> Signed-off-by: Andrey Zhizhikin <andrey.z@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
classes/kernel: Use a copy of image for kernel*.rpm if fs doesn't support symlinks
Some filesystems don't support symlink, then you will get failure when
you install or update the kernel rpm package. Now we use a copy of
image for these filesystems instead of symlink.
Suggested-by: Bruce Ashfield <bruce.ashfield@gmail.com> Suggested-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Update tests for file 5.39. (Closes: reproducible-builds/diffoscope#179)
* Downgrade the tlsh warning message to an "info" level warning.
(Closes: #888237, reproducible-builds/diffoscope#29)
* Use the CSS "word-break" property over manually adding U+200B zero-width
spaces that make copy-pasting cumbersome.
(Closes: reproducible-builds/diffoscope!53)
* Codebase improvements:
- Drop some unused imports from the previous commit.
- Prevent an unnecessary .format() when rendering difference comments.
- Use a semantic "AbstractMissingType" type instead of remembering to check
for both "missing" files and missing containers.
* Allow user to mask/filter reader output via --diff-mask=REGEX.
(MR: reproducible-builds/diffoscope!51)
* Make --html-dir child pages open in new window to accommodate new web
browser content security policies.
* Fix the --new-file option when comparing directories by merging
DirectoryContainer.compare and Container.compare.
(Closes: reproducible-builds/diffoscope#180)
* Fix zsh completion for --max-page-diff-block-lines.
* Do not warn about missing tlsh during tests.
Version 150:
* Don't crash when listing entries in archives if they don't have a listed
size (such as hardlinks in .ISO files).
(Closes: reproducible-builds/diffoscope#188)
* Dump PE32+ executables (including EFI applications) using objdump.
(Closes: reproducible-builds/diffoscope#181)
* Tidy detection of JSON files due to missing call to File.recognizes that
checks against the output of file(1) which was also causing us to attempt
to parse almost every file using json.loads. (Whoops.)
* Drop accidentally-duplicated copy of the new --diff-mask tests.
* Logging improvements:
- Split out formatting of class names into a common method.
- Clarify that we are generating presenter formats in the opening logs.
* Remove objdjump(1) offsets before instructions to reduce diff noise.
(Closes: reproducible-builds/diffoscope!57)
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
classes/archive: do_configure should not depend on do_ar_patched
The commit d4be264061 ("classes/archiver: run do_unpack_and_patch after
do_preconfigure") correctly moved do_unpack_and_patch to depend on
do_preconfigure, but left do_ar_patched as a dependency of do_configure
introduced from 8a7c779487 ("classes/archiver: Create patched archive
before configuring"). Having do_configure depend on do_ar_patched is
blatantly wrong. Firstly, doing so causes the taskhash of do_configure
to change which is undesirable. Secondly, the anon python that sets up
the tasks carefully skips GCC recipes that depend on gcc-source to
provide their source code since running do_unpack_and_patch in them
would delete the source code. Adding in the dependency effectively
bypasses this and makes these recipes delete the shared gcc-source
This fixes errors (for real this time) like:
cat: .../gcc/defaults.h: No such file or directory
when making certain configuration changes.
For posterity, you could easily reproduce gcc-source being erased by
running the commands (replacing aarch64 with your correct target arch):
# The following would fail because
# gcc-cross-aarch64:do_unpack_and_patch erases shared source, so
# do_configure after that fails.
bitbake gcc-cross-aarch64
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changqing Li [Fri, 3 Jul 2020 05:47:59 +0000 (13:47 +0800)]
logrotate.py: fix testimage occasionally failure
testcase test_systemd_failed occasionally failed with below error:
Failed to start Rotate log files.
logrotate.service: Failed with result 'exit-code'.
logrotate.service: Main process exited, code=exited, status=1/FAILURE
error: stat of /var/log/logrotate_test failed: No such file or directory
error: logrotate_test:1 lines must begin with a keyword or a filename (possibly in double quotes)
above failure caused since testcase test_logrotate_wtmp
add /etc/logrotate.d/logrotate_test, which need /var/log/logrotate_test,
but there is no such file. so when logrotate.service is triggerd
by logrotate.timer after testcase test_logrotate_wtmp is runned,
the testcase test_systemd_failed will fail.
these 3 lines are useless, so remove them to fix above problem.
Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
baremetal-helloworld: Use do_image_complete instead of do_deploy
To better align with upstream and mimic how images
are built, use do_image and do_image_complete instead
of do_deploy to populate artifacts on DEPLOY_DIR_IMAGE.
Signed-off-by: Alejandro Hernandez Samaniego <alejandro@enedino.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andrej Valek [Fri, 3 Jul 2020 10:06:01 +0000 (12:06 +0200)]
dropbear: update to 2020.80
License-Update: changed date and added info about existence LICENSE files
in libtomcrypt and libtommath folders Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I've been unable to reprodue this but believe its caused by garbage
collection of the FileHandler used in QemuTarget being delayed until
after a new tinfoil instance is created by a subseqent test.
Force the log file to be closed when we stop using it to avoid this.
[YOCTO #13961]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 2 Jul 2020 18:46:07 +0000 (19:46 +0100)]
oeqa/selftest: recipetool/devtool: Avoid load_plugin test race
This bug has plagued the autobuilder for a couple of years and we've
struggled to reproduce/debug it.
The problem is the "lib" directory in meta-poky used during the load_plugin
tests for recipetool and devtool can race and one can delete the files
from the other leading to test failures.
Deleting the lib directory only if empty will avoid this.
[YOCTO #13070]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since commit [24b80d211f nativesdk.bbclass: set sbindir to bindir]
applied, sbindir = bindir in nativesdk, then routine `rmt' is
installed to bindir which break `rmdir ${D}${bindir}/' failed with
`Directory not empty'
Don't rmdir if sbindir != bindir
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Lee Chee Yang [Wed, 1 Jul 2020 14:39:08 +0000 (22:39 +0800)]
oeqa/core/loader: refine regex to find module
test case in format <module name>.<class name>.<test case name>
this is clear when test cases is only 3 item deep.
but confused when it is 4 item deep, eg,
oelib.types.TestList.test_list_nosep
in this case, oelib and oelib.types can both be treated as module
since module name contains only lower cases and class name should
contain atleast one upper case.
so, always treat leading item without upper case as module also allow
module name to contain dot.
[YOCTO #13941]
Signed-off-by: Lee Chee Yang <chee.yang.lee@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds -X option to ldconfig to not create symlinks
as part of the ldconfig cache creation process.
It is much better to keep all needed symlinks as part of
of the package then let ldconfig do the job.
In the case symlink was created by ldconfig and later on the
package got removed the dangling link will remain on the
filesystem. Not to mention that such a symlink is orphaned
(e.g. rpm -qf <file-path> will not show the package the symlink
is part of).
It also align the behaviour with libc-musl where the ldconfig
is not invoked by default.
Signed-off-by: Damian Wrobel <dwrobel@ertelnet.rybnik.pl> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changqing Li [Thu, 2 Jul 2020 08:33:13 +0000 (16:33 +0800)]
gtk-icon-cache.bbclass: add runtime dependency
fix error:
+ /usr/lib/gdk-pixbuf-2.0/gdk-pixbuf-query-loaders --update-cache
/var/tmp/rpm-tmp.mdYxY6: line 12: /usr/lib/gdk-pixbuf-2.0/gdk-pixbuf-query-loaders: No such file or directory
%post(adwaita-icon-theme-3.36.1-r0.0.noarch): waitpid(2961) rc 2961 status 7f00
warning: %post(adwaita-icon-theme-3.36.1-r0.0.noarch) scriptlet failed, exit status 127
when install adwaita-icon-theme on target, which inherit gtk-icon-cache
above error reported, fix by add runtime dependency to pkgs
we don't use explicit RDEPENDS, so fix do_rootfs breaking by adding it into DEPENDS.
Error:
Problem: conflicting requests
- nothing provides gdk-pixbuf needed by adwaita-icon-theme-3.36.1-r0.noarch
- nothing provides gtk+3 needed by adwaita-icon-theme-3.36.1-r0.noarch
Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- cirrus-ci: disable FreeBSD 13 (again)
- Curl_inet_ntop: always check the return code
- CURLOPT_READFUNCTION.3: provide the upload data size up front
- DYNBUF.md: fix a typo: trail => tail
- escape: make the URL decode able to reject only %00-bytes
- escape: zero length input should return a zero length output
- examples/multithread.c: call curl_global_cleanup()
- http2: set the correct URL in pushed transfers
- http: fix proxy auth with blank password
- mbedtls: fix build with disabled proxy support
- ngtcp2: sync with current master
- openssl: Fix compilation on Windows when ngtcp2 is enabled
- Revert "multi: implement wait using winsock events"
- sendf: improve the message on client write errors
- terminology: call them null-terminated strings
- tool_cb_hdr: Fix etag warning output and return code
- url: allow user + password to contain "control codes" for HTTP(S)
- vtls: compare cert blob when finding a connection to reuse
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oescripts: ignore whitespaces when comparing lines
list-packageconfig-flags.py determines the whitespace numbers according
to the longest package name. This is reasonable for the tool as it's
trying to generate pretty output.
However, in this selftest case, the output is hardcoded. This results in
"pinentry gtk2 libcap ncurses qt secret" not recognized
as correct as the expected line is:
"pinentry gtk2 libcap ncurses qt secret".
The difference is only about whitespaces. So we should ignore the whitespaces
when comparing lines.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
