Richard Purdie [Fri, 13 Sep 2013 12:35:31 +0000 (13:35 +0100)]
bitbake.conf/package: Collapse PKGDATA_DIR into a single machine specific directory
Currently we have a hierarchy of pkgdata directories and the code has to put together
a search path and look through each in turn until it finds the data it needs.
This has lead to a number of hardcoded paths and file globing which
is unpredictable and undesirable. Worse, certain tricks that should be
easy like a GL specific package architecture become problematic with the
curretn search paths.
With the modern sstate code, we can do better and construct a single pkgdata
directory for each machine in just the same way as we do for the sysroot. This
is already tried and well tested. With such a single directory, all the code that
iterated through multiple pkgdata directories and simply be removed and give
a significant simplification of the code. Even existing build directories adapt
to the change well since the package contents doesn't change, just the location
they're installed to and the stamp for them.
The only complication is the we need a different shlibs directory for each
multilib. These are only used by package.bbclass and the simple fix is to
add MLPREFIX to the shlib directory name. This means the multilib packages will
repackage and the sstate checksum will change but an existing build directory
will adapt to the changes safely.
It is close to release however I believe the benefits this patch give us
are worth consideration for inclusion and give us more options for dealing
with problems like the GL one. It also sets the ground work well for
shlibs improvements in 1.6.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Thu, 12 Sep 2013 11:04:52 +0000 (12:04 +0100)]
bitbake.conf: include machine name in DEPLOY_DIR_IMAGE
This allows a clean seperation between image outputs from different
machines, and makes it possible to have convenience symlinks to make
the output ready to deploy.
This did require some surgery in runqemu; if explicit paths to the image
and kernel are not supplied then DEPLOY_DIR_IMAGE needs to be determined
from bitbake or set in the environment. However the script does try to
avoid requiring it unless it really is needed. Corresponding changes
were made in the automated testing code as well.
Based on an RFC patch by Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Thu, 12 Sep 2013 09:33:36 +0000 (05:33 -0400)]
icu-native: do_install: Segmentation fault
There was a "Segmentation fault" error when build icu-native when the
TMPDIR is in a deep directory (for example, when len(readlink -f $TMPDIR
== 410)), use LARGE_BUFFER_MAX_SIZE for cmd rather than
SMALL_BUFFER_MAX_SIZE would fix the problem, this should be a misplay
because other cmd uses LARGE_BUFFER_MAX_SIZE.
[YOCTO #5171]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If not every combination of BB_NUMBER_THREADS and PARALLEL_MAKE have
been tested by bb-matrix.sh, e.g., by using BB_RANGE="04 08 10 12 16"
and PM_RANGE="04 08 10 12 16", then the graph that gnuplot generates by
default looks very jagged due to the missing data points. By using
splines to interpolate the missing data the graph looks a lot better.
This should not change graphs where all data points are available in any
way, only improve sparse graphs.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 9 Sep 2013 14:14:39 +0000 (15:14 +0100)]
bitbake.conf: Stop providing ${P} and ${PF} by default
For a long time we've provided PN-PV and PN-PV-PR by tweaking PROVIDES. This looks
nice at first glance however it turns out to be a bit problematic. Taking make as an
example where there are two versions, 3.81 and 3.82, what should "bitbake make-3.81" do?
Currently it builds make-3.81 and make-3.82 and breaks in interesting ways. Is that
a bitbake bug? Well, it certainly shouldn't try and run the build. Why is it building
3.82 though? Its due to finding a dependency on "make-dev" and then trying to figure
out what provides it? The answer is "make" and the default version of "make" is 3.82.
So arguably, finding "make-3.81" should infer PREFERRED_VERSION_make = "3.81". Doing
so resolved the above problem since now "make" resolves to "make-3.81".
So what about if we have Recipe A:
DEPENDS = "make-3.81"
and Recipe B:
DEPENDS = "make-3.82"
That is clearly an error, easy. So finally what about if we have Recipe A:
DEPENDS = "make-3.81"
and Recipe B:
DEPENDS = "make"
The first recipe infers the PREFERRED_VERSION_make = "3.81" and then forces that
version on everything else. Is that desired? Probably not in most cases, at least not
silently.
As mitigation, we could print a WARNING about this happening. The final part of the problem
is that we can ony figure this out within bitbake itself. That means we'd have to teach bitbake
about the PN-PV format of PROVIDES which is breaking the separation between bitbake and the
metadata. We can't win :(.
Nobody that I know of is using or relying on this functionality so perhaps we should
just remove it instead which is what this patch does. Opinions?
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bb-matrix: Clean before, rather than after, building
This makes sure the the first build starts from a clean state. Otherwise
one could have the first build affected by any leftover state from
a previous build.
This also leaves a working state behind after the final build.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Roy.Li [Tue, 13 Aug 2013 08:20:18 +0000 (16:20 +0800)]
sstate.bbclass: fix parallel building issue
sstate_package creates hardlink from sysroot to SSTATE_BUILDDIR, then
sstate_create_package will store SSTATE_BUILDDIR into a archive file by
tar, but once other packages install the same file into sysroot, the
creating the archive file will fail with below error:
DEBUG: Executing shell function sstate_create_package
tar: x86_64-linux/usr/share/aclocal/xorg-macros.m4: file changed as we read it
This kind of error is harmless, use --ignore-failed-read to ignore it.
The error in tar occurs when the timestamp of the file changes and this
can happen when the number of symlinks change. The file will be included
in the archive.
[YOCTO #5122]
Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Wed, 11 Sep 2013 13:47:11 +0000 (14:47 +0100)]
clutter: fix compilation when building without X11 backend
If Clutter is building the Wayland backend but not the X11 backend, the Cogl
support doesn't get enabled so the Wayland backend (which uses it) fails to
compile.
Backport a fix from upstream to fix this situation.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Wed, 11 Sep 2013 13:48:19 +0000 (14:48 +0100)]
x11vnc: add dependencies for xrandr/xfixes/xdamage/xtst
Inspired by a patch by Martin Jansa but with these libraries required, as a VNC
server without them is suboptimal. Don't add an option for Xinerama as our X
server always disables it.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Wed, 11 Sep 2013 22:24:57 +0000 (23:24 +0100)]
xf86-video-vmware: respect opengl DISTRO_FEATURE
Conditionalise the GL dependencies on the opengl DISTRO_FEATURE so this driver
can build without the opengl feature active, as the configure script will
enable/disable the GL sub-driver depending on the presence of these libraries.
This is an interim patch to fix the autobuilder, a more complete patch heading
upstream to make the GL sub-driver deterministic will follow.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can't build both recipes in the world build as there is a collision of package name
and PR values. Specificly the libasound-module-bluez which is the same in both goes
backwards from r5 (bluez4) -> r0 (bluez5) and the subpackage_metadata check fails:
ERROR: Recipe lib32-bluez5 is trying to change PR from 'r0' to 'r5'. This will cause do_package_write_* failures since the incorrect data will be used and they will be unable to find the right workdir.
[YOCTO #5165]
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Wed, 11 Sep 2013 20:30:26 +0000 (21:30 +0100)]
xf86-video-vesa: change depends to refect reality
This recipe appears to have been a copy-and-paste from -intel, because it has
dependencies and configure options that xf86-video-vesa just doesn't have, such
as virtual/libgl and XVMC.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Wed, 11 Sep 2013 20:30:25 +0000 (21:30 +0100)]
ia32-base: only depend on GL if opengl DISTRO_FEATURE enabled
As Mesa refuses to compile if the "opengl" DISTRO_FEATURE isn't enabled,
mesa-driver-i9xx and the GLX X module have to be conditional in the ia32 machine
defintion too.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stefan Stanacar [Wed, 11 Sep 2013 18:40:21 +0000 (21:40 +0300)]
lib/oeqa/runtime: smart: limit channel add to useful ones
Don't add inappropiate channels on the target.
This happens when building two different machines in the
same dir and then running the tests for each machine.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Roy Li [Wed, 11 Sep 2013 09:17:32 +0000 (17:17 +0800)]
ptest-runner: trivial fixes and refine
1. ptest files may be installed under /usr/lib64/ for 64bit filesystem
or under /usr/lib/ for 64bit multilib filesystem, so we should check both
directories
2. If a soft link is linking to a directory under the same directory, we
only run once.
[YOCTO #5125]
[YOCTO #5126]
Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ting Liu [Wed, 11 Sep 2013 03:11:15 +0000 (11:11 +0800)]
libcroco: disable Bsymbolic if it is not supported on some hosts
When trying to build on my Centos 5.5 machine, got below error:
| checking for gtkdoc-mkpdf... no
| checking whether to build gtk-doc documentation... no
| checking for CROCO... yes
| checking if gcc supports "-Wl,-Bsymbolic-functions" flag...
| configure: error: -Bsymbolic requested but not supported by ld. Use --disable-Bsymbolic to disable
| Configure failed. The contents of all config.log files follows to aid debugging
|
| configure: exit 1
| ERROR: oe_runconf failed
Set --enable-Bsymbolic=auto to disable it when it is not suppported.
Signed-off-by: Ting Liu <b28495@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 11 Sep 2013 09:42:44 +0000 (10:42 +0100)]
image/populate_sdk: Ensure symlinks in target sysroot are relative
In the target sysroot of an SDK we can have target system absolute links
which don't make sense. This adds a script which fixes them up to become relative
paths instead.
[YOCTO #5020]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
init-live.sh: distinguish between a read-only image and a read-write image
The iso and hddimg share a common concept of 'live image', and they
use the same initramfs and thus the same init. However, that init
script in initramfs made a wrong assumption that the rootfs image
was read-only by itself. This is apparently not true for hddimg.
To make things work as expected, this init script should at least
distinguish between a read-only rootfs image and a read-write one.
This patch adds this ability to the init script. After this change,
the init script would be able to check whether the rootfs image is
read-only or not. If the rootfs image is read-write, the image will
be mounted and then booted directly. No union mounts will be attempted
in this case.
[YOCTO #5164]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By using os.path.dirname(systemd_unitdir) we get the correct /lib directory instead of
dealing with possibly multilib directories. This address a QA Error for shipped/not
installed /lib with multilib and x32.
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd: Remove base_libdir if installed only for systemd_unitdir
If a recipe installs systemd_unitdir and it is a non-systemd build than
systemd.bbclass deletes systemd_unitdir (/lib/systemd/) but not
base_libdir (/lib). In this case if base_libdir is empty than following
QA Issue is reported.
ERROR: QA Issue: openssh: Files/directories were installed but not shipped
/lib
If base_libdir was installed due to systemd_unitdir installation than for
non-systemd build it should also be removed.
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Maxin B. John [Mon, 9 Sep 2013 17:47:30 +0000 (19:47 +0200)]
dbus-ptest: fix populate_sdk error
When we enable "ptest", populate_sdk fails with the following error:
# bitbake core-image-minimal -c populate_sdk
..
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies
for dbus-ptest-dev:
* dbus-ptest (= 1.6.10-r0) *
* opkg_install_cmd: Cannot install package dbus-ptest-dev.
Disable that dependency.
Signed-off-by: Maxin B. John <maxin.john@enea.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mount.sh: automount cdrom device even if no ID_FS_TYPE available
This script was modified to check whether $ID_FS_TYPE is empty before
automount, however, for cdrom devices on qemu, the ID_FS_TYPE is not
set, yet the device should be mounted. Otherwise, when booting an iso
image with runqemu, the boot process hangs at 'waiting for removable
media'.
This patch fixes this problem by first checking whether the block device
is a cdrom.
[YOCTO #4487]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
cmake.bbclass: ensure CMAKE_SYSTEM_NAME is correct
Using TARGET_OS can add the ABIEXTENSION so ensure that is is removed for the Linux
TARGET_OS, we might have other TARGET_OSes so don't hard code CMAKE_SYSTEM_NAME
[YOCTO #5145]
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
adt-installer: allow installation of other machines
Currently, adt-installer allows only the installation of qemu target
sysroots.
The changes in this patch do the following:
* add a new setting in adt-installer.conf (YOCTOADT_TARGET_MACHINE) for
each target architecture. For example, for arm we can choose to use a
qemuarm sysroot or a beagleboard sysroot. By default, only the qemu
target sysroots are selected (current behavior);
* change adt_installer scripts to allow installing the correct
meta-environment package for the selected machine;
* remove some left-over commented lines;
* use packagegroup-cross-canadian-${MACHINE} when installing the cross
canadian packages instead of doing it separately for each package;
* change the opkg config files in order to be able to find the
packagegroup package, which is allarch;
[YOCTO #4783]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
packagegroup-cross-canadian: change package name to include MACHINE
Since meta-environment package name was changed to contain MACHINE,
change packagegroup-cross-canadian package name too, in order to be able
to select the proper environment files for a certain machine.
Also, remove the RPROVIDES since adt-installer doesn't really need it.
[YOCTO #4783]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
meta-environment: change package name to include MACHINE
Currently, the package name contains just the TRANSLATED_TARGET_ARCH.
When compiling the toolchain for two machines, belonging to the same
architecture (for example: qemuarm and beagleboard), this package gets
overwritten and adt-installer repo will contain just one
meta-environment package... This leads to situations like installing the
toolchain for qemuarm and end up with meta-environment package with
beagleboard cpu options.
[YOCTO #4783]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador [Wed, 4 Sep 2013 21:39:11 +0000 (21:39 +0000)]
u-boot, u-boot-fw-utils-cross, u-boot-mkimage: Upgrade to 2013.07
This upgrades the U-Boot based recipes for 2013.07 release.
This removes the 2011.03, 2011.06 and 2013.01.01 versions so we keep a
single one in core. The following recipes has been upgraded:
- u-boot (remove old versions)
- u-boot-mkimage (remove old versions)
- u-boot-fw-utils -> u-boot-fw-utils-cross (renamed and reworked)
The u-boot-fw-utils-cross recipe has been reworked as it uses the
UBOOT_MACHINE to find default environment for use so it is indeed a
cross binary and not a native one.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ptest.bbclass: add cleandirs flag to do_install_ptest_base
The do_install_ptest_base task should have cleandirs flag, just like
the do_install task. The ${D}${PTEST_PATH} directory should be cleaned,
Otherwise, there would be similar errors like below if the
do_install_ptest_base task is rerun.
ln: failed to create symbolic link `xxx': File exists
The do_install_ptest_base function uses 'type -t' command to check
whether do_install_ptest is a function and acts correspondingly.
However, the 'type' command is a shell builtin and its behavior is
not all the same across Linux distros. On ubuntu, if we use #!/bin/sh
as the interpreter for the scripts, as in the case of our intermediate
scripts, the '-t' option for the 'type' command is not supported. So
the check always fails and the do_install_ptest function, even if defined,
is not run.
The same problem also applies to the do_configure_ptest_base and the
do_compile_ptest_base functions.
This patch fixes this problem by avoiding using the 'type' builtin command.
Richard Purdie [Sat, 7 Sep 2013 22:25:14 +0000 (23:25 +0100)]
cmake: set system name correctly
For unknown reasons, the cmake class is using SDK_OS as the
target system OS. This makes no sense but only shows up as a problem
when you try a different SDK OS. Fix it to use TARGET_OS which is
the correct thing to do. For the vast majority of users this will
make no difference.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
package.bbclass: skip already-stripped QA test if asked for
Some packages like grub have already stripped binaries e.g.
ERROR: QA Issue: File '/boot/grub/kernel.img' from grub was already
stripped, this will prevent future debugging!
ERROR: QA run found fatal errors. Please consider fixing them.
We would like to have a possibility to skip it using something like
INSANE_SKIP_${PN} = "already-stripped"
This adds the logic to do so
it acts at PN level and not at package level. so something like
Darren Hart [Wed, 4 Sep 2013 21:44:52 +0000 (21:44 +0000)]
linux-firmware: Update SRCREV, pull in iwlwifi-7260 support
Fixes [YOCTO #5110]
Add support for the iwlwifi 7260 adapters. This creates a new package
and includes support in the default linux-firmware (everything) package.
Update the iwlwifi and radeon license checksums. Extensions to the
copyright date ranges were the only change to the LICENSE files.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: yunguo.wei@windriver.com Cc: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 6 Sep 2013 19:47:29 +0000 (15:47 -0400)]
kern-tools: support no author patches
Updating the kern-toosl SRCREV to pick up the following fix:
previous versions of the kern-tools supported the ability to import a bare
patch, with no From: Subject: or other identifying fields that are typically
in a full commit.
The same type of commit with kgit-s2q will prompt for a author ID, just
as git-quilt-import does. In build system environment that leads to an
infinite loop and the commit is never pushed.
To fix this issue, we add an interactive flag (-i), that when passed the
prompt based behaviour is used. When it isn't passed (the default), the following
name and email will be used for the git author:
Bruce Ashfield [Fri, 6 Sep 2013 19:47:28 +0000 (15:47 -0400)]
kernel-yocto: improve error checking on non-git repos
While non-git kernel repos are not the preferred format for a kernel upstream,
they are supported. Depending on the creator of the archive the expanded
source directory name varies. If the recipe for the kernel doesn't properly
set S to the right value, a cryptic git error message is produced. We can
detect the situation and offer some advice on how to fix the issue.
A second check is also added in this commit for archive based kernel repos
which won't have a SRCREV to validate. If we have no SRCREV or SRCREV is
INVALID, we can exit the branch validation step immediately. This saves yet
another cryptic git error message and simplifies a custom tgz based recipe.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 6 Sep 2013 20:58:37 +0000 (16:58 -0400)]
linux-yocto/3.10: update meta SRCREV for beagleboard config changes
Updating the beagleboard configuration to match the 3.10 kernel changes.
With this, the beagle* boards boot out of the box, with no additional
changes required.
Simarpreet Singh <simar@linux.com> Signed-off-by: Liming Wang <liming.wang@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Fri, 6 Sep 2013 14:44:14 +0000 (15:44 +0100)]
systemd: split out systemd-binfmt as a separate package
If binfmt_misc was compiled as a module but isn't installed then systemd-binfmt
will put an automounter on /proc/sys/fs/binfmt_misc and when it attempts to
automount (e.g. when df is called) it can't find support for the filesystem, and
throws an error.
As binfmt_misc isn't commonly used, split this helper into it's own package, add
a dependency on kernel-module-binfmt-misc, and ensure the service gets started
when it's installed.
[ YOCTO #4863 ]
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 6 Sep 2013 14:14:34 +0000 (14:14 +0000)]
lib/oeqa/qemurunner: Use a timeout in select() call
A 0 value to select.select() immediately returns with no timeout. This was
pegging the cpu at 100% for the python process which was bad and may be
contributing to some of the timeout problems.
Profile from -P of a core-image-minimal before:
97526792 function calls (97525652 primitive calls) in 45.189 seconds
and after:
50204 function calls (49064 primitive calls) in 17.318 seconds
Saving 97.5 million function calls has to be good :)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jonathan Liu [Thu, 5 Sep 2013 05:24:39 +0000 (15:24 +1000)]
resolvconf: specify configuration for systemd-tmpfiles --update
Running systemd-tmpfiles --update without specifying a configuration
file results in all tmpfiles.d configuration files being processed.
/usr/lib/tmpfiles.d/systemd.conf creates /run/nologin on boot to
prevent non-root users from logging in while the system is booting.
If systemd-tmpfiles --update is run after the system has started,
it will still create /run/nologin which would prevent non-root users
from logging in with the message "System is booting up.".
Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stefan Stanacar [Thu, 5 Sep 2013 10:54:43 +0000 (13:54 +0300)]
lib/oeqa/runtime: add basic scanelf test
This uses scanelf from the pax-utils package and scans the binaries in PATH
for TEXTREL and RPATH information. For a sato image with pax-utils installed
it shows no output (which is good).
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 5 Sep 2013 15:17:27 +0000 (16:17 +0100)]
devshell: Don't corrupt the fakeroot variables
The devshell anonymous python fragment overwrites variables in the
datastore with their expanded versions. If this runs before the code
in allarch.bbclass which changes TARGET_OS, we can end up with different
directories in the fakeroot environment variables, some expanded with
the original TARGET_OS value.
The devshell code only needs to run before the task itself so we change
to trigger it to run at task execution time only using a flag.
[YOCTO #4795]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
run-postinsts: move script execution from S98 to S99 in rcS.d
Apparently, when opkg/dpkg and run-postinsts are installed in the same
time, opkg/dpkg postinstall overwrites the run-postinsts link in rcS.d.
This will make run-postinsts script useless and the delayed postinstalls
will not be run.
This issue happens only when 'package-management' is disabled and, in
the same time, dpkg/opkg ends up in the image: either pulled by some
dependency or manually installed.
With this patch, both opkg/dpkg and run-postinsts scripts will run but
the former will silently fail because the package metadata is removed from
the image since 'pacakge-management' is disabled.
[YOCTO #4484]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jukka Rissanen [Fri, 6 Sep 2013 07:23:00 +0000 (10:23 +0300)]
connman: Ignore the NFS root network interface in init script
The connman init.d script tried to ignore all the network interfaces
if NFS root is configured. We should only ignore the interface
that is used by NFS root.
[YOCTO #4587]
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
useradd: Handle users from a package being used in others
If there is a package A (TUNE_PKGARCH) which is depended upon by B which
is MACHINE_ARCH and you build B for machine X, then Y, the user isn't
present in the sysroot for machine Y since the useradd code is never
triggered.
The change ensures the code does get triggered and the user is present.
[YOCTO 4739]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jason Wessel [Thu, 22 Aug 2013 23:04:27 +0000 (18:04 -0500)]
kernel.bbclass, image.bbclass: Implement kernel INITRAMFS dependency and bundling
This patch aims to fix the following two cases for the INITRAMFS generation.
1) Allow an image recipe to specify a paired INITRAMFS recipe such
as core-image-minimal-initramfs. This allows building a base
image which always generates the needed initramfs image in one step
2) Allow building a single binary which contains a kernel and
the initramfs.
A key requirement of the initramfs is to be able to add kernel
modules. The current implementation of the INITRAMFS_IMAGE variable
has a circular dependency when using kernel modules in the initramfs
image.bb file that is caused by kernel.bbclass trying to build the
initramfs before the kernel's do_install rule.
The solution for this problem is to have the kernel's
do_bundle_initramfs_image task depend on the do_rootfs from the
INITRAMFS_IMAGE and not some intermediate point. The image.bbclass
will also sets up dependencies to make the initramfs creation task run
last.
The code to bundle the kernel and initramfs together has been added.
At a high level, all it is doing is invoking a second compilation of
the kernel but changing the value of CONFIG_INITRAMFS_SOURCE to point
to the generated initramfs from the image recipe.
[YOCTO #4072]
Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Mihai Lindner [Thu, 5 Sep 2013 15:52:42 +0000 (18:52 +0300)]
oeqa/runtime/scp: replace dd call
Use a file object to generate a our test file instead of calling `dd`;
removes dd's output from testimage.log, keeps unittest output clean.
Also remove unused imports.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mihai Lindner [Thu, 5 Sep 2013 15:52:41 +0000 (18:52 +0300)]
oeqa/utils/sshcontrol: tweak ssh options
Add ssh_options to be used, the same, by ssh and scp:
Decrease LogLevel to ERROR, to suppress warnings (e.g. ssh host
verifications, two warnings in case of having openssh with hpn patches);
We no longer presume that the first line is a warning.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Peter A. Bigot [Sat, 31 Aug 2013 23:50:13 +0000 (18:50 -0500)]
chkconfig: remove linuxstdbase symlinks
These links were moved to the lsb package because lsbsetup was to be
removed. Subsequently an earlier patch that moved them to chkconfig was
also merged. This results in duplicate installations that generate a
warning when building core-image-lsb under DISTRO=poky-lsb which enables the
linuxstdbase feature.
Signed-off-by: Peter A. Bigot <pab@pabigot.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since its initial commit from the classic OpenEmbedded repository
in 43e94412c45b4b79485a64010c76d89b245bb235, serialization was
commented out, reportedly due to some issue with powerpc in the
boost version 1.36. In the classic OpenEmbedded repository,
serialization has been added again since version 1.4x.
The commit removes the outdated comment and adds serialization to
the BOOST_LIBS after testing `bitbake boost` and bitbaking some
applications using boost from the meta-ros layer for qemuppc.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sysklogd: lower the ALTERNATIVE_PRIORITY in case of systemd
The sysklogd package hasn't got systemd support yet. So in case of
a systemd based system, the commands and corresponding configuration
files should have a lower priority than that of the busybox's syslogd
and klogd utilities. These two utilities from busybox have internal
systemd support if CONFIG_FEATURE_SYSTEMD is enabled. And that config
item is enabled by default.
[YOCTO #5066]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default, busybox has CONFIG_FEATURE_SYSLOGD_CFG enabled, but it
doesn't ship a configuration file.
This patch adds a configuration file (/etc/syslog.conf) to the
busybox-syslog package. This configuration file mainly serves as a
placeholder now.
The advantages of this change are:
1. Make the users aware of the fact that the /etc/syslog.conf file
will actually be parsed by busybox's syslogd utility. And configuring
that file will change the logging behaviour.
2. In a systemd based system, this file will prevent the same configuration
file provided by the sysklogd package from messing things up.
[YOCTO #5066]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If rule directory is inexist, the acpid initscript will exit with success,
but the daemon will be not running.
Print message in this case to tell user that the daemon is not running.
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
