Kevin Tian [Sun, 21 Nov 2010 02:32:50 +0000 (10:32 +0800)]
update-alternatives.bbclass: don't expand var when appending do_install
Or else absolute paths may be expanded which then breaks sstate signature
comparison.
I'm not sure whether pre/post funcs can be expanded or not. They are
invoked at image build or on the target, and thus need be expanded some
place. But if one recipe does use directories under TMP in its postinst
helpers, this would be an issue again.
This would avoid warnings like these:
NOTE: preferred version 4.5.0 of gcc-runtime not available
libgcc-dev)
NOTE: preferred version 2.6.34 of linux-libc-headers not available
item linux-libc-headers-dev)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Nitin A Kamble [Mon, 8 Nov 2010 16:30:41 +0000 (08:30 -0800)]
gcc: upgrade from 4.5.0 to 4.5.1
Removed these patches which are not needed anymore.
gcc-4.5.0_to_svn_162697.patch.bz2 : All the commits in this patch is
part of the 4.5.1 branch. So moving to 4.5.1 makes this patch
obsolete
gcc_revert_base_version_to_4.5.0.patch: moving to 4.5.1 removes need
of this patch
gcc-pr43698-arm-rev-instr.patch: upstream has this fix.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Saul Wold [Mon, 15 Nov 2010 22:01:31 +0000 (14:01 -0800)]
web_svn: make it buildable for world build
libowl was missing from the link library list
There where patches being pulled in from the SVN trunk that confused
quilt, so we remove the patches directory before doing the patching
Added LIC_FILES_CHKSUM
Updated LICENSE Metadata
Saul Wold [Mon, 15 Nov 2010 22:00:45 +0000 (14:00 -0800)]
subversion: Fix host contamination
The with-sasl check was looking into /usr/local, so a prepend_configure
was added to modify the /usr/local to ${STAGING_DIR} in build/ac-macros/sasl.m4
Bruce Ashfield [Mon, 15 Nov 2010 16:25:58 +0000 (11:25 -0500)]
linux-wrs: rename to linux-yocto
The existing preferred yocto kernel wasn't named appropriately
and needs to be updated.
In keeping the changes small and isolated, this commit simply
renames the recipe and some internal variables. Future commits
will refactor the code into more usable blocks.
Now that linuy-wrs has been renamed linux-yocto, we need
to rename and update an board configurations and append
files.
Now that linux-wrs has been renamed linux-yocto, we need to
update the SRCREVs to have the new name.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Scott Rifenbark [Thu, 11 Nov 2010 21:44:17 +0000 (13:44 -0800)]
Poky Reference Manual: Task wording made consistent
I am using "xxxxxx" task as the way to call out a specific task in the
text. Previously a mix of <function>xxxxxx</function> and the "xxxxxx"
methods were being used.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Thu, 11 Nov 2010 19:05:19 +0000 (11:05 -0800)]
Poky Reference Manual: Removed the bsp.xml file.
Because I am single-sourcing the bsp.xml file that is used both as
chapter 4 in the Poky Reference Manual and as the singe file in the BSP
Guide I removed the bsp.xml file that was local to the poky-ref-manual
folder.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Thu, 11 Nov 2010 18:59:49 +0000 (10:59 -0800)]
BSP Guide and BSP Chapter in Poky Reference Manual: Changed wording
I created wording in the second paragraph of this file so that it can
fit both the context of the BSP Guide and the BSP chapter of the
Poky Reference Manual.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Thu, 11 Nov 2010 18:54:40 +0000 (10:54 -0800)]
Poky Reference Manual: Changed source location of the bsp.xml file
Because BSP chapter (bsp.xml) is identical to the single file used
in the BSP Guide (also bsp.xml but in the bsp-guide folder) I have decided
to change where the Poky Reference Manual get the bsp.xml file. This commit
causes it to get the file from the bsp-guide folder instead of an identical
but separate bsp.xml file local to the poky-ref-manual folder.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Thu, 11 Nov 2010 18:41:12 +0000 (10:41 -0800)]
Poky Reference Manual: Fixed list tag.
There was a mis-matched list element in an ordered list near the end
of the chapter. I had an <orderedlist> tag matched with an </itemizedlist>
tag preventing the make.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Thu, 11 Nov 2010 18:23:10 +0000 (10:23 -0800)]
BSP Guide and BSP Chapter: Sync'ed these two files
After moving BSP Guide into its own folder for documentation I discovered
a consequence of that. There are two separate bsp.xml files now: one
in the poky-ref-manual folder and one in the bsp folder. I had done some
good cleanup work in the version in the poky-ref-manual folder. This
commit reflects a 'meld' operation where I re-sync'ed the bsp.xml
file in the bsp-guide folder to be the same (almost) as the one in the
poky-ref-manual folder. There is still one slight difference between the
two files due to one's context as a stand-alone manual and the other as
a section in a larger book.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The xsltproc command in the Makefile now uses the XSL Customization
layer style sheet poky-ref-manual-customization.xsl for the style
sheet parameter. This method will allow for customization of the
HTML version formatting that might be unique for the manual. I have
added the new file to the file structure.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Wed, 10 Nov 2010 21:05:37 +0000 (13:05 -0800)]
Poky Reference Manual: Added XSL Customization layer use
The xsltproc command now uses the XSL Customization layer style sheet
poky-ref-manual-customization.xsl for the style sheet parameter. This
method will allow for customization of the HTML version formatting that
might be unique for the manual.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Wed, 10 Nov 2010 20:59:27 +0000 (12:59 -0800)]
Poky Reference Manual: Clean up Makefile
I moved the XSLTOPTS variables to the top of the file so they will
be defined first. This is an attempt to fix the seemingly random
HTML runtime errors I am getting during the 'make html' command.
It seems to be consistently working now.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Wed, 10 Nov 2010 20:48:35 +0000 (12:48 -0800)]
Poky Reference Manual: Fixed broken link in Ref Images appendix.
In the Ref Images appendix there was a link to the section
"External Development Using the Poky SDK" section that did not work
due to the section id string changing. I fixed the link.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Tue, 9 Nov 2010 18:50:21 +0000 (10:50 -0800)]
BSP Guide: Updated xsltproc command to pass the bsp-guide-customization.xsl style sheet.
Because I created the file 'bsp-guide-customization.xsl' to try and eliminate odd
HTML runtime errors and to allow for customized XSL layer of formatting, it was necessary to
update the Makefile to call the new file as the XSL style sheet.
The Yocto Project Quickstart uses this technique and has no HTML build
problems.
HTML build errors seem to be eliminated so far.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Tue, 9 Nov 2010 18:48:17 +0000 (10:48 -0800)]
BSP Guide: I created a new figure for the title page.
Since the BSP Guide is under its own cover I thought it would be good
to have its title page not have the Poky Handbook PNG image. I created
this BSP image for use with the stand-alone BSP Guide.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
