Ng Wei Tee [Fri, 5 May 2017 02:04:58 +0000 (19:04 -0700)]
linux-firmware: enable netronome firmware
It was previously disabled, as rpm refused to package it into noarch
package, due to the firmware being considered arch-specific. This
check is disabled in rpm now.
The netronome binaries has ELF headers which will trigger an
arch-specific error. INSANE_SKIP variable is used to skip some
package_qa check usage.
Signed-off-by: Ng Wei Tee <wei.tee.ng@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ng Wei Tee [Fri, 5 May 2017 02:04:57 +0000 (19:04 -0700)]
rpm: allow arch-dependent binaries in noarch packages
This is needed for packages like linux-firmware which have a
legitimate reason for it. Oe-core has a separate package_qa
test for this situation, so any accidental inclusions of such
binaries will still be caught.
[YOCTO #11329]
Signed-off-by: Ng Wei Tee <wei.tee.ng@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
'fontforge issue' was actually a non-issue; fontforge is required only
when building ttf fonts from sfd source. We took prebuilt ttf fonts
when using 1.04 version, and can do the same thing with 2.00.1 version,
it's just that the tarball name for prebuilt fonts has slightly changed
and no one noticed somehow.
License has changed from GPLv2 to Open Font License v.1.1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Marc Ferland [Tue, 25 Apr 2017 14:48:34 +0000 (10:48 -0400)]
bluez5: Upgrade 5.43 -> 5.44
New feautures/fixes in this version:
* fixes to BLE
* a new midi plugin
* support for single-mode controllers w/o public address
* most of the experimental tools have been promoted and are now part of
the official tools
* 'experimental' has been renamed to 'testing' (hence the addition of
the 'testing' package config option)
* classic command line tools like hciattach and hciconfig are now enabled
by the "--enable-deprecated" configure option (enabled by default for
backward compatibility).
Signed-off-by: Marc Ferland <ferlandm@amotus.ca> Signed-off-by: Ross Burton <ross.burton@intel.com>
1) Upgrade libarchive from 3.2.2 to 3.3.1.
2) Fix an unknown-configure-option "--without-lzmadec" when do_configure.
3) Delete three patches, since they are integrated upstream.
0001-archive_write_disk_posix.c-make-_fsobj-functions-mor.patch
0002-Fix-extracting-hardlinks-over-symlinks.patch
non-recursive-extract-and-list.patch
Signed-off-by: Huang Qiyu <huangqy.fnst@cn.fujitsu.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Tue, 2 May 2017 12:42:08 +0000 (13:42 +0100)]
oeqa/selftest: add test for package manager version comparison
This test case verifies that opkg, dpkg, and rpm all have the same behaviour for
version ordering, specifically the behaviour of ~ which should be sorting
*before* nothing:
1.0 < 2.0~pre < 2.0 < 2.0-fix
Signed-off-by: Ross Burton <ross.burton@intel.com>
Split the configuration values (common and specific) so it is easier to read
what goes into the config file. Also the specific configurations are
set in every loop so these do not append on each iteration.
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
rootfs-postcommands.bbclass: Check if "/etc/fstab" exists
Using "read-only-rootfs" feature in minimal or special
purpose images (eg mounted images) makes build to fail
because ${IMAGE_ROOTFS}/etc/fstab file does not exist.
Signed-off-by: Panagiotis Tamtamis <panagiotis.tamtamis@unify.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Markus Lehtonen [Thu, 27 Apr 2017 08:17:33 +0000 (11:17 +0300)]
oe.lsb: add get_os_release()
Move get_os_release() from oeqa.utils.metadata to oe.lsb, merging the
code with release_dict_osr() from oe.lsb. This removes some code
duplication and makes get_os_release() more robust.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Richard Purdie [Fri, 12 May 2017 10:05:41 +0000 (12:05 +0200)]
useradd: Create lib/oe/useradd function library
The code in useradd-staticids is generally useful for user addition
functionality but is not reusable in its current form. Refactor the
code into a set of library functions.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 8 Mar 2017 14:22:30 +0000 (14:22 +0000)]
populate_sdk_ext: Avoid build failures where sstate was used
If sstate was used to populate the build and one of the universal-4.8
or universal-4.9 mirror urls was used, the sstate checks during eSDK
construction could fail as it would zero out the SSTATE_MIRRORs
variable.
Use the same mirrors variable setting as the eSDK would end up using
to perform the checks to avoid this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 9 Mar 2016 23:04:48 +0000 (23:04 +0000)]
gcc-configure/gcc-target: Move arm6/7 config to target only
We only build one gcc-cross per architecture and having target specific
flags means gcc-cross would rebuild. These flags are really for the
on target case, so they should be set in gcc-target only.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 7 Mar 2017 20:10:31 +0000 (20:10 +0000)]
glibc: Avoid errors if you accidentally create a git symlink in the glibc source dir
If you accidentally create symlinks in the glibc sources directory, it
fails in very hard to understand ways. Whilst most people don't do this,
since I debugged it, specifify the list of plugins we use to avoid
this biting anyone else.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 11 May 2016 15:29:05 +0000 (16:29 +0100)]
base: Simplify BASEDEPENDS construction
This code dates from distant times before we had class overrides.
The comments are also rather stale. Rewrite this code using class
overrides which makes it safer, more modern and more easily
understandable.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Zhixiong Chi [Thu, 20 Apr 2017 07:04:54 +0000 (15:04 +0800)]
bash: CVE-2016-0634
A vulnerability was found in a way bash expands the $HOSTNAME.
Injecting the hostname with malicious code would cause it to run
each time bash expanded \h in the prompt string.
Porting patch from <https://ftp.gnu.org/gnu/bash/bash-4.3-patches/
bash43-047> to solve CVE-2016-0634
CVE: CVE-2016-0634
Signed-off-by: Zhixiong Chi <zhixiong.chi@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
update SRC_URI: as of 1.7.3, repo changed. same owner
Renamed recipe to reflect PV and added Epoch
Added ptest, tests added v1.7.3
updated LICENSE to be more accurate.
Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Richard Purdie [Fri, 31 Mar 2017 14:28:07 +0000 (15:28 +0100)]
package_ipk/deb: Tweak functions for better cleanup and layout
This uses more modern formatting to handle the lockfiles and control
file cleanup with try/finally, taking advantage of the previous
extra indentation.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 31 Mar 2017 12:34:24 +0000 (13:34 +0100)]
package_deb: Split do_package_write_deb into two functions
This prepares the way to parallelise deb generation and splits the iteration
over packages and the package generation into separate functions. Whitespace
indentation is unchanged deliberately and is fixed in a followup patch. There
should be no functional change.
Some checks on variables are removed as they were pointless when you looked
at the code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 30 Mar 2017 21:02:08 +0000 (22:02 +0100)]
package_ipk: Split into two functions
This prepares the way to parallelise ipk generation and splits the iteration
over packages and the package generation into separate functions. Whitespace
indentation is unchanged deliberately and is fixed in a followup patch. There
should be no functional change.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 8 May 2017 10:56:22 +0000 (11:56 +0100)]
staging: Allow BB_LIMITEDDEPS to avoid BB_TASKDEPDATA
In the limited dependency case we don't use any of the data from
BB_TASKDEPDATA. Restructure the code so this variable doesn't have
to be set. This allows the function to be called from other contexts
without creating artificial constructs. There should be no functional
change, behaviour remains unchanged.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 4 May 2017 10:59:14 +0000 (11:59 +0100)]
sstate: Ensure native/cross recipes have relocation of HOSTTOOLS_DIR
The previous change to relocate HOSTTOOLS wasn't complete as some files,
particularly in gcc stashed build directories were not being correctly
relocated. This patch addresses the issue.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the file encodes full paths to various host tools in the
HOSTTOOLS directory which is bad in native and target cases. We can
simply use the versions from PATH quite safely in OE.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tcf-agent: enable default target debugging features
A number of features were disabled in OE due to historic problems
on ARM. In tcf-agent 1.4, they compile cleanly on all architectures
besides mips and libc-musl. These features are required for target
debugging with Eclipse Neon, CDT and TCF plugins - for example used
by Xilinx Vivado SDK 2016.4.
For MIPS and libc-musl, at least re-enable SERVICE_Symbols and
SERVICE_LineNumbers which compile cleanly.
Signed-off-by: Gernot Hillier <gernot.hillier@siemens.com> Signed-off-by: Tim Offermann <tim.offermann@siemens.com> Acked-by: Eugene Tarassov <eugene.tarassov@xilinx.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tcf-agent uses "a64", not "aarch64", see agent/Makefile.inc. This fix
allows to re-enable features like SERVICE_Breakpoints and SERVICE_
MemoryMap on arm64.
Ross Burton [Mon, 24 Apr 2017 14:43:57 +0000 (15:43 +0100)]
python3: add python3 metapackage
Many new users add "python3" to their image using IMAGE_INSTALL and are then
surprised that they can't import any of the standard library. This is because we
split up the standard library into a number of packages, and python3-core (the
interpreter and essential modules only) RPROVIDES 'python3'.
Solve this by moving the RPROVIDES of 'python3' to python3-modules, so that the
entire Python standard library is installed.
[ YOCTO #11182 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
The same logic should apply to image_live.bbclass, to allow other
filesystems to be used vs just ext4. The default value of ext4 is kept
so there is no functional change unless LIVE_ROOTFS_TYPE is set in the
inherting recipe.
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
parselogs: whitelist failed to enable keyboard error on intel-corei7-64
This error is seen on the Braswell RVP platform we have been using for
testing. The error is caused by atkbd.c keyboard driver, which is only
for AT and PS/2 keyboards. I tested a PS/2 keyboard with the board,
which worked fine, and the board does not have a separate AT connector,
so this error won't cause any functional issues.
[YOCTO #10110].
Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Jose Lamego [Tue, 4 Apr 2017 21:45:09 +0000 (16:45 -0500)]
create-pull-request: add "-t in-reply-to" option
The create-patch-request script creates patches as replies to a cover
letter, in the form of an email thread. If further revisions are sent to
the mailing list without referencing to the first revision, these new
revisions are not identified at the mailing list as part of the original
thread, but as a new thread instead.
This change adds the "[-t in_reply_to]" option, where "in_reply_to" is
the original cover letter's Message-Id, so this reference is added
to the new cover letter to ensure the thread continuity.
[YOCTO #11294]
Signed-off-by: Jose Lamego <jose.a.lamego@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Avoid using LTTng's BUILD_RUNTIME_BUG_ON macro, as it appears to run
into a similar problem as Linux experienced with __builtin_constant_p
and dead code elimination.
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
