Robert Yang [Tue, 14 Aug 2012 14:01:33 +0000 (22:01 +0800)]
sstate-cache-management.sh: update it for the new layout
Update it for the new layout of sstate-cache.
Note: It doesn't handle the old sstate-cache/sstate-xxx.tgz (or
siginfo), the user should remove it manually (rm -fr
sstate-cache/sstate-* would be OK).
[YOCTO #2897]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Tue, 14 Aug 2012 16:10:31 +0000 (17:10 +0100)]
classes: add gsettings.bbclass
This class registers postinst/postrm hooks to compile the GSetting schemas, and
adds the relevant dependencies. If possible the postinst happens on the host to
avoid running it on the target.
[ YOCTO #2798 ]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 13 Aug 2012 09:14:23 +0000 (10:14 +0100)]
rpmresolve: improve debug output
Rename rpmresolve's -d option to -t and make -d enable debug output;
add a -o option to specify the output file (so rpm debug output doesn't
go to the output file) and also add a little more detail to some of the
error messages.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Koen Kooi [Mon, 13 Aug 2012 07:49:00 +0000 (09:49 +0200)]
man: make man actually work by installing custom man.config
The default man.conf is named wrong and doesn't work. It references gtbl, while groff installs tbl and other things. This man.conf is imported from OE classic and runtime tested on angstrom.
Before:
root@beaglebone:~# man man
sh: /usr/bin/gtbl: No such file or directory
sh: line 0: echo: write error: Broken pipe
gunzip: write: Broken pipe
gunzip: error inflating
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
After:
root@beaglebone:~# man man
MAN(1) Manual pager utils MAN(1)
NAME
man - an interface to the on-line reference manuals
Bruce Ashfield [Thu, 26 Jul 2012 18:04:31 +0000 (14:04 -0400)]
kernel.bbclass: remove default module_autoload and module_conf values
kernel.bbclass is a common class for many different kernel versions,
and as such the default module_autoload and module_conf values that
it contains are not relevant, or out of date for most builds.
Individual kernel recipes or distros can better specify these
values to meet their needs.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Mihai Lindner [Fri, 10 Aug 2012 09:07:38 +0000 (12:07 +0300)]
sysklogd: removed tabs from syslog.conf
Yocto #2926: syslog.conf should not have tabs within the selector field.
Removed tabs from the selector field of syslog rules. Tabs or spaces
should be used, in syslog.conf, only when separating selectors from
actions.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Andy Ross [Fri, 10 Aug 2012 19:00:41 +0000 (12:00 -0700)]
dbus: Fix pid file in dbus init script
The PIDFILE (/var/run/dbus/pid) referenced by /etc/init.d/dbus-1 did
not match the path (/var/run/messagebus.pid) configured in
/etc/dbus-1/system.conf, so the initscript could start the daemon, but
not stop it. Also remove needless directory ownership logic
(dbus-daemon drops its pid file as root before calling setuid).
Signed-off-by: Andy Ross <andy.ross@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Peter Seebach [Fri, 10 Aug 2012 22:32:56 +0000 (17:32 -0500)]
base.bbclass: Expand PNBLACKLIST across multilibs too
The PNBLACKLIST feature does not currently work with multilibs,
because they have different ${PN}. The obvious thing to do is to
do this at the same point that we do the PREFERRED_PROVIDER
and PREFERRED_VERSION fixups. (Making the PNBLACKLIST check
do the for-each-multilib check requires it to do the multilib
list generation repeatedly.)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Wenzong Fan [Tue, 7 Aug 2012 12:14:23 +0000 (20:14 +0800)]
sysfsutils: install libs to base_libdir
Fix the warning form pcmciautils building:
"WARNING: QA Issue: pcmciautils: /sbin/pccardctl, installed in the
base_prefix, requires a shared library under exec_prefix (/usr):
libsysfs.so.2 => /usr/lib/libsysfs.so.2"
Just refer to Debian/Ubuntu distributions, install sysfsutils libs
to "/lib*" instead of "/usr/lib*".
[YOCTO #2907]
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Wenzong Fan [Thu, 9 Aug 2012 02:59:15 +0000 (10:59 +0800)]
at 3.1.13: get 'at' depends on 'flex-native' explicitly
'at' needs flex to generate source file lex.yy.c, but it doesn't
depend on flex-native directly; This maybe cause a do_compile
failure if flex-native is not built or included in project.
Error message is:
error: lex.yy.c: No such file or directory
Get 'at' depends on flex-native to fix this potential issue.
[YOCTO #2919]
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Yao Zhao [Wed, 8 Aug 2012 18:49:40 +0000 (14:49 -0400)]
gstreamer: gst-ffmpeg: fix build issues for libav
1.The included libav configure is not generated by autotools
modify recipe to use correct toolchain wrapper with configure
2.add bzip2 dependency explicitly.
or configure will detect whether libbz2 is installed, if bzip2
is triggered earlier then it will be detected, if not then won't
3.backport libav_e500mc.patch from upstream to patch configure to
disable-altivec if it is e500mc.
4.move the GSTREAMER_DEBUG to libav's configure, it is not the
option for the main configure.
Signed-off-by: Yao Zhao <yao.zhao@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Jackie Huang [Wed, 8 Aug 2012 05:11:17 +0000 (13:11 +0800)]
tcl: uncomment a line that causing TCL_SRC_DIR point to the workdir.
The line 'sed -i "s+${WORKDIR}+${STAGING_INCDIR}+g" tclConfig.sh'
is commented somehow in previous commit, so that TCL_SRC_DIR
point to the tcl workdir which will cause package that use it
fail to configure or compile when the tcl workdir is removed,
so uncomment it back.
Martin Jansa [Thu, 2 Aug 2012 16:45:09 +0000 (18:45 +0200)]
bitbake.conf: store cooker logs in subdirectory of LOG_DIR
* we should probably wait until
http://git.openembedded.org/bitbake/commit/?id=1e06d8012868ba5a31503dc99cbf18570be629d9
is in next required bitbake version, but error message if the directory doesn't exist is quite clear
* people with new enough bitbake could just change this in their local.conf
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
run-postinsts: Does not run any scripts on debian rootfs
On my system (core-image-base, .deb package files), run-postinsts does
not run any scripts due to a failed test in run-postinsts.awk.
As dpkg is not actually installed on target, opkg is identified as the
pkgdir and that is not right...
Paul Eggleton [Mon, 13 Aug 2012 18:58:00 +0000 (18:58 +0000)]
createrepo: add wrapper script to fix paths
Fixes sstate relocation due to the path to /etc/rpm being baked into the
libraries - this manifested in the form of the following assertion at
runtime:
Paul Eggleton [Mon, 13 Aug 2012 18:54:32 +0000 (18:54 +0000)]
rpmresolve: add wrapper script to fix paths
Fixes sstate relocation due to the path to /etc/rpm being baked into the
libraries - this manifested in the form of the following assertion at
runtime:
Robert Yang [Mon, 13 Aug 2012 13:01:16 +0000 (21:01 +0800)]
qemu.inc: disable curl for qemu-nativesdk
We had added the --disable-curl to EXTRA_OECONF, but there is an
EXTRA_OECONF_virtclass-nativesdk += "foo", the
"EXTRA_OECONF_virtclass-nativesdk +=" equals to
"EXTRA_OECONF_virtclass-nativesdk =" (the "+" has no effect here), so we
should add the "--disable-curl" to EXTRA_OECONF_virtclass-nativesdk.
And change the "+=" to "=" to not confuse people.
[YOCTO #2305]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold [Wed, 8 Aug 2012 08:56:24 +0000 (11:56 +0300)]
foomatic: fix perl path for target
This problem appears on F17 when configure finds /bin/perl, since the beh
script is a target side script, we need to set PERL in the do_configure_prepend
in order for the correct perl to be used
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 7 Aug 2012 21:29:00 +0000 (21:29 +0000)]
gcc: Disable use of sdt.h header
The target sysroot might contain sdt.h but we don't list this in DEPENDS
and shouldn't be referencing it. Unfortunately there is no way to tell
configure this since these tests are uncached and we can't force
a particular value. The only option is therefore to patch this out.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andy Ross [Mon, 6 Aug 2012 19:41:04 +0000 (12:41 -0700)]
iputils: Break libsysfs dependency
iputils drops a /bin/arping with a runtime linkage against libsysfs in
/usr. Port Fedora 17 iputils-20071127-infiniband.patch, which inlines
access previously done by libsysfs.
Signed-off-by: Andy Ross <andy.ross@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart [Mon, 6 Aug 2012 15:56:13 +0000 (08:56 -0700)]
linux-yocto-custom: Clarify usage and clear COMPATIBLE_MACHINE
There has been some confusion over proper use of the linux-yocto-custom
recipe. It is not intended to build as is from meta-skeleton. It should
be modified via a bbappend file to provide a Linux kernel config at the
very least.
Update the commentary to make this requirement more explicit. Add some
additional detail about how to create a bbappend file and how and when
to modify the various variables.
Clear COMPATIBLE_MACHINE so bitbake will not attempt to build the recipe
unless the user explicitly adds there machine to the variable, which
should encourage them to read the recipe comments before attempting to
build it.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Bruce Ashfield <bruce.ashfield@windriver.com> CC: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 7 Aug 2012 11:18:13 +0000 (12:18 +0100)]
python: Fix RPATH QA issue on non-gplv3 builds
On non-gplv3 builds, gdbm gets built different due to the different version
which triggers a different codepath in python's db support and then hence
triggers an invalid RPATH QA issue. This change extends the appropriate patch
to cover the code paths we need it to cover and avoid adding the problematic
RPATH.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 7 Aug 2012 11:17:16 +0000 (12:17 +0100)]
linux-yocto-3.4: Disable extra slang header search path
Add in a workaround to avoid host infection detection build failures
from the slang include directory in perf. I'll defer to Bruce to
fix this properly but we need a workaround now as this is breaking
builds.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libpam: disable NIS to not link with libtirpc when it is available
I was checking ways to make incremental builds faster so I started using
sstate-cache and SSTATE_MIRRORS. But this gave me some nasty bug:
| Collected errors:
| * satisfy_dependencies_for: Cannot satisfy the following dependencies
for php-cgi:
| * libtirpc1 (>= 0.2.2) *
| * opkg_install_cmd: Cannot install package php-cgi.
I checked details:
In my previous build libtirpc got built before libpam so libpam found it
and linked. As a result packages depend on libtirpc1 but as there is no
such build dependency sstate handling code did not used libtirpc copy...
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Tue, 31 Jul 2012 11:33:01 +0000 (12:33 +0100)]
classes/package: don't make locale pkgs depend on PN pkg if not in PACKAGES
If ${PN} is not in PACKAGES then don't add it as an RDEPENDS for each
locale package. This fixes the installation of gcc-runtime locale
packages, for example.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Thu, 2 Aug 2012 09:23:09 +0000 (10:23 +0100)]
classes/buildhistory: save metadata revisions
Always write the metadata revisions for each layer into a machine-
readable "metadata-revs" file so that you can potentially link changes
in the output back to changes in the metadata. (Unlike the existing
similar build-id file, this is not specific to image changes.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Thu, 2 Aug 2012 09:23:08 +0000 (10:23 +0100)]
buildhistory_analysis: ignore removal of self-dependencies
The recent removal of self-dependencies for dbg/dev packages produced
a fair amount of noise, so filter it out since we know this is a
reasonable change.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Thu, 2 Aug 2012 09:23:05 +0000 (10:23 +0100)]
classes/buildhistory: record PKG/PKGE/PKGV/PKGR
Save PKG (the actual output package name, which is often different due
to debian renaming), and PKGE/PKGV/PKGR (which may be manipulated in
certain special cases e.g. gitpkgv.bbclass in meta-oe, the
external-sourcery-toolchain recipe, etc.) Note that these are only
written when they are different from the normal package name in the
case of PKG, or PE/PV/PR for the other variables.
Also, use PKGE/PKGV/PKGR instead of PE/PV/PR when comparing package
versions since these actually represent the version that the package
manager sees.
Implements [YOCTO #2787].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Thu, 2 Aug 2012 09:23:04 +0000 (10:23 +0100)]
classes/buildhistory: save preinst/postinst/prerm/postrm
Write the value of these package script variables into the packageinfo
so that any changes to them can be tracked (in separate files since they
are multi-line).
Inspired by an earlier patch from Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Thu, 2 Aug 2012 09:23:03 +0000 (10:23 +0100)]
classes/buildhistory: remove unused functions
getlastrecipeversion and readRecipeInfo weren't called anywhere.
Remove them so we don't have to keep them up-to-date with future
additions to the recipe info file.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Thu, 2 Aug 2012 09:23:02 +0000 (10:23 +0100)]
classes/buildhistory: ensure old package info is removed
If a package is removed from PACKAGES, ensure that the package info file
and directory are removed from buildhistory so that we don't have stale
data lying around.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Thu, 2 Aug 2012 09:23:01 +0000 (10:23 +0100)]
classes/buildhistory: remove obsolete flat package history feature
Remove the ability to set BUILDHISTORY_KEEP_VERSIONS = "1" to save the
package history as flat versioned files rather than relying on git to
keep previous versions of the package information. git has proven to
work quite well in this capacity.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
