Paul Eggleton [Tue, 13 Jan 2015 12:15:02 +0000 (12:15 +0000)]
libxml-simple-perl: fix LICENSE to be more accurate
XML::Simple is distributed under the same licenses as Perl itself; its
accompanying license statement also explicitly restates Artistic license
or GPL version 1 or (at your option) any later version (i.e. the same as
Perl).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Robert Yang [Mon, 12 Jan 2015 06:04:53 +0000 (22:04 -0800)]
portmap: remove obsolete lines
* The SRC_URI and S in portmap.inc was for portmap 5, but we don't have
it any more.
* Remove DEPENDS = "virtual/fakeroot-native" and fakeroot before
do_install.
* Remove sbindir = "/sbin" and use "${base_sbindir}" in FILES.
* Move patches from dir portmap-6.0 to portmap.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Robert Yang [Thu, 8 Jan 2015 00:01:46 +0000 (16:01 -0800)]
gnu-efi: upgrade to 3.0.1
* Use the official src rather than debian.
* It doesn't have a general license file, the license is embedded in the
files, which are "GPLv2+ | BSD-2-Clause".
* Supported aarch64 and arm.
* Remove parallel-make.patch that was accepted upstream. (From Saul)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Peter A. Bigot [Fri, 9 Jan 2015 12:51:37 +0000 (06:51 -0600)]
bluez5: upgrade to 5.27
- Bug fixes in A2DP, OBEX, GATT, and mgmt
- Low Energy Secure Connections with 3.19+ kernels
See: http://www.bluez.org/release-of-bluez-5-27/
See: http://www.bluez.org/release-of-bluez-5-26/ Signed-off-by: Peter A. Bigot <pab@pabigot.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Saul Wold [Tue, 6 Jan 2015 22:04:01 +0000 (14:04 -0800)]
security_flags: disable pie support for libaio, blktrace and ltp
libaio when built with pie and fpie does not link correctly with blktrace or ltp
so we need to disable those flags until a better solution comes along.
Saul Wold [Thu, 13 Nov 2014 22:38:06 +0000 (14:38 -0800)]
usbutils: Add version 008
The latest version of usbutil (v008) uses the latest version of udev (v196 or greater)
which is only available as part of the systemd package. So add systemd as a DEPENDS and
REQUIRED_DISTRO_FEATURE.
Add v008 version of iconv.patch
COPYING file is GPLv2, but has newer formatting and address change.
Ross Burton [Fri, 9 Jan 2015 16:40:31 +0000 (16:40 +0000)]
socat: forcibly disable use of libbsd
Socat will look for openpty() in BSD headers before Linux headers, so if libbsd
is present at configure time then that will be used. We don't need to depend on
libbsd though, and leaving it floating can cause build errors, so tell configure
that the libbsd header isn't present.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Martin Jansa [Thu, 8 Jan 2015 17:11:18 +0000 (18:11 +0100)]
package.bbclass: Fix support for private libs
* n is a tuple since this commit:
commit d3aa7668a9f001044d0a0f1ba2de425a36056102
Author: Richard Purdie <richard.purdie@linuxfoundation.org>
Date: Mon Jul 7 18:41:23 2014 +0100
Subject package.bbclass: Improve shlibs needed data structure
since then 'n in private_libs' was always false and private libs
were always processed
* this is bad when we have libfoo in private libs, but also some package
providing libfoo, that way we ship own libfoo.so, but together with
runtime dependency on package providing libfoo
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
The directfd in qt4-embedded is c++, and there was a build failure:
...
| qdirectfbwindowsurface.cpp:336:69: error: in C++98 'rect' must be
initialized by constructor, not by '{...}'
| const DFBRectangle rect = { r.x(), r.y(), r.width(), r.height() };
...
The g++ used c++98 as default c++ standard, we should
explicitly set c++0x for directfd in qt4-embedded.
Armin Kuster [Fri, 2 Jan 2015 04:45:28 +0000 (20:45 -0800)]
lz4: update to r127
dropped Makefile from license check.
r127
added : lz4frame_static.h
r126
New : lz4frame API is now integrated into liblz4
Fixed : GCC 4.9 bug on highest performance settings, reported by Greg Slazinski
Fixed : bug within LZ4 HC streaming mode, reported by James Boyle
Fixed : older compiler don't like nameless unions, reported by Cheyi Lin
Changed : lz4 is C90 compatible
Changed : added -pedantic option, fixed a few minor warnings
r125
New 32/64 bits, little/big endian and strict/efficient align detection routines
(internal)
New directory structure
Small decompression speed improvement
Fixed a bug into LZ4_compress_limitedOutput(), thanks to Christopher Speller
lz4 utility uses lz4frame library (lz4io modified)
r124
New : LZ4 HC streaming mode
Fixed : LZ4F_compressBound() using null preferencesPtr
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Robert Yang [Sun, 4 Jan 2015 02:38:19 +0000 (18:38 -0800)]
grub 2.0: several fixes
* Make grub, grub-efi grub_git use a grub2.inc to reduce the duplicated code.
* Make grub and grub-efi use the same patches since they use the same
source. (grub_git is different).
* grub-efi:
- Use autotools to replace autotools-brokensep
- Remove the DEPENDS of freetype, it should be a RDEPENDS.
- Remove grub-2.00-ignore-gnulib-gets-stupidity.patch since it is a
duplication of remove-gets.patch.
- Make grub-efi.rpm contain files rather than make an empty package.
* grub_git:
- Fix a SSE build failure.
[YOCTO #6310]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Always use use_icc to check if IceCC should be enabled. Move
ICECC_DISABLED variable checking to use_icc function. Also while we are
at it, fix condition in icc_is_allarch function.
Signed-off-by: Dmitry Eremin-Solenikov <dmitry_eremin@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 15 Jan 2015 10:03:50 +0000 (10:03 +0000)]
cross-canadian/meta-environment: Allow modification of TARGET_OS to be optional
There are some cases we want the manipulation cross-canadian performance
on TARGET_OS, there are also cases like meta-environment where we do not
want this manipulation.
We did try and use immediate expansion to avoid this problem and it
works in the non multilib case. If we have a multilib that used an
extension, like for example:
which is rather evil, I'd challenge someone to come up with a nicer way
of making it work though!
Rather than the above madness, we modify cross-canadian to make the
problamtic code conditional.
This fixes the original issue (where a linux-gnuspe target was seeing
'linux') of
http://cgit.openembedded.org/openembedded-core/commit/?id=0038634ee6e2b6035c023a2702547f20f67c103a
but also fixes the multilib one.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Thu, 15 Jan 2015 11:54:20 +0000 (11:54 +0000)]
kernel-yocto: remove GUILT_BASE from terminal exports
guilt is no longer used to manage linux-yocto kernel pathes, so
we no longer need to export variables that it needed to locate
patches in the tree.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart [Thu, 15 Jan 2015 11:54:19 +0000 (11:54 +0000)]
kernel.bbclass: Update cleandirs to remove new kernel staging dirs
Fixes [YOCTO 6818]
Update do_unpack[cleandirs] to include the STAGING_KERNEL_BUILDDIR, and
add the same set of updated cleandirs for do_clean.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart [Thu, 15 Jan 2015 11:54:18 +0000 (11:54 +0000)]
kernel-devsrc: Depend on virtual/kernel:do_compile
Since virtual/kernel do_compile modifies ${B}, we need to wait for
do_compile to copy everything across in order to ensure a deterministic
file set.
Currently, we race against the build and can see .debug directories, and
the do_compile dependency we will always see them. Add .debug to the
find path pruning.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Thu, 15 Jan 2015 11:54:17 +0000 (11:54 +0000)]
perf: Disable perf-libunwind
It hasn't actually been being enabled anyway: 'Disabling post unwind,
no support found.'. For now, turn it off because of [YOCTO #7129].
Fixes [YOCTO #7129].
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Thu, 15 Jan 2015 11:54:16 +0000 (11:54 +0000)]
perf: Add libdw unwind support to perf-libunwind feature
perf can use either libdw or libunwind dwarf unwinders, or neither.
The perf-libunwind feature implies that if disabled, neither should be
used, so have it disable both libdw and libunwind DWARF unwinders if
disabled.
This fixes [YOCTO #7129].
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Thu, 15 Jan 2015 11:54:15 +0000 (11:54 +0000)]
kernel: move source and build output to work-shared
commit 3b3f7e785e279 [kernel: Rearrange for 1.8] began the process of
moving the kernel source and build artefacts out of sstate control and
into a shared location.
This changed triggered some workflow issues, as well as bugs related
to the kernel source containing build output, and hence being dirty and
breaking kernel rebuilds.
To solve these issues, and to make it clear that the kernel is not under
sstate control, we move the source and build outputs to:
Where kernel-build-artifacts is the kernel build output and
kernel-source is kept "pristine". The build-artifacts contain everything
that is required to build external modules against the kernel source,
and includes the defconfig, the kernel-abiversion, System.map files and
output from "make scripts".
External module builds should either pass O= on the command line, or
set KBUILD_OUTPUT to point to the build-artifacts. module-base.bbclass
takes care of setting KBUILD_OUTPUT, so most existing external module
recipes are transparently adapted to the new source/build layout.
recipes that depend on the kernel source must have a depedency on the
do_shared_workdir task:
With this dependency added, the STAGING_KERNEL_DIR will be populated and
available to the rest of the build.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador [Thu, 15 Jan 2015 11:54:14 +0000 (11:54 +0000)]
kernel.bbclass: When linux/version.h exists, copy it
Old Linux kernel versions rely on linux/version.h for modules; this
needs to be published for external modules to use. Copy it when
available.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador [Thu, 15 Jan 2015 11:54:13 +0000 (11:54 +0000)]
module.bbclass: Add KERNEL_SRC in EXTRA_OEMAKE
When the sstate hash changes for do_configure task, the do_configure
default implementation triggers the 'clean' to be run. For it to
succeed we need to have KERNEL_SRC defined in EXTRA_OEMAKE. Fixes
following error:
,----
| DEBUG: Executing shell function do_configure
| NOTE: make -e MAKEFLAGS= clean
| make -C M=.../tmp/work/... clean
| make[1]: *** M=.../tmp/work/...: No such file or directory. Stop.
| Makefile:20: recipe for target 'clean' failed
| make: *** [clean] Error 2
| ERROR: oe_runmake failed
`----
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 15 Jan 2015 09:37:16 +0000 (09:37 +0000)]
libxml2: Backport fix for CVE introduced entity issues
The CVE fix introduced problems with entity issues, we observed this
when building the Yocto Docs in particular. Backport the fix from
upstream so we can build our docs correctly.
[YOCTO #7134]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Noor [Wed, 7 Jan 2015 13:51:18 +0000 (18:51 +0500)]
bind: Update libxml2 check to make it deterministic.
* Firstly configure scritp was testing files from bin folder.
In our case we don't copy bin folder to sysroot for target
recipes. So added extra check to validate .pc file from lib
folder via a patch to configure.in file.
* Secondly linxml2 dependency was missing. So added PACKAGECONFIG
for libxml2.
Signed-off-by: Noor Ahsan <noor_ahsan@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
split out libfm-extra as a seperate recipe to break a circular dependency
with newer menu-cache recipe.
This obsoletes ignore_automake_warnings.patch.
This obsoletes fix-make-parallelism-issue.patch.
https://github.com/lxde/libfm/commit/24c8eab43cb5b79ca917d67a2c5924aca34c80c9
The library part of libfm has its license changed by the authors to LGPL:
http://git.lxde.org/gitweb/?p=lxde/libfm.git;a=commit;h=e0d250aeb40f26ceead82d4b4c7af3b58ab34930
Signed-off-by: Max Krummenacher <max.oss.09@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador [Wed, 7 Jan 2015 17:25:17 +0000 (15:25 -0200)]
base.bbclass: Avoid explicit ${MAKE} in do_configure
The do_configure may eventually call 'make clean' when the sstate
signature does not match. We should respect EXTRA_OEMAKE when doing
so, so use 'oe_runmake' for it.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Wed, 7 Jan 2015 15:04:15 +0000 (07:04 -0800)]
glib-2.0: add HOMEPAGE
It doesn't have a homepage except gtk.org, use its reference manual page
as the homepage, which we can easily know whether it is a stable version
or not.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Chen Qi [Mon, 5 Jan 2015 03:04:07 +0000 (11:04 +0800)]
cmake-native: disable check for acl.h
We build cmake-native without acl support. However, the acl.h header
is still being checked which would sometimes cause the following error
during do_compile:
archive_read_disk_entry_from_file.c:38:21: fatal error: sys/acl.h: No such file or directory
| #include <sys/acl.h>
| ^
| compilation terminated.
This happens when the sysroot parts of acl-native is removed between
do_configure and do_compile tasks of cmake-native.
To reproduce the problem manually, execute the following command:
André Draszik [Mon, 13 Oct 2014 11:09:09 +0000 (12:09 +0100)]
openssl: fix hard paths in native openssl
This causes the package to not be relocateable from sstate
The OpenSSL binaries respect a few environment variables for determining
locations of files, so we now use these to point the binaries to the
relocated locations.
[YOCTO #6827]
Signed-off-by: André Draszik <adraszik@digisoft.tv> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Saul Wold [Wed, 10 Dec 2014 18:26:33 +0000 (10:26 -0800)]
syslinux: Update to 6.0.3
Removed patches that are now committed upstream, rebase parallel make
patch and add a new patch to remove a script that was calling git during
the clean process.
Robert Yang [Sat, 3 Jan 2015 06:13:58 +0000 (22:13 -0800)]
cogl: enable egl-x11 when build with x11
Fixed clutter-1.0 compile error when build with x11:
clutter-backend-eglnative.h:31:27: fatal error: cogl/cogl-egl.h: No such file or directory
#include <cogl/cogl-egl.h>
compilation terminated.
We need enable egl-x11 when x11 as we enable egl-wayland when wayland.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
If you run a QT server application, and a client in a separate process, it will
spam the log with "QWSLock::down(): Invalid argument" messages because of an old
bug in the locking code. There's a patch on the net that fixes it, which I manually
adapted by removing the commented-out debug statements.
We have been using this patch for about half a year without problems, and the QT people
apparently don't care about the bug, for which this solution has been posted in 2012.
Including this into OE core will at least save other people the trouble of having to find
and apply it for themselves.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Fri, 2 Jan 2015 10:05:39 +0000 (10:05 +0000)]
dropbear: upgrade to 2014.66
* Upgrade to upstream 2014.66; incorporates several minor bugfix
releases.
* LIC_FILES_CHKSUM changed because the copyright year changed; there was
no change to the license text itself.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Paul Eggleton [Fri, 26 Dec 2014 15:05:36 +0000 (15:05 +0000)]
openssh: upgrade to 6.7p1
* Drop two CVE patches already handled upstream.
* Drop nostrip.patch which no longer applies and use the existing
--disable-strip configure option instead.
* OpenSSH 6.7+ no longer supports tcp wrappers. We could apply the
Debian patch to add support back in, but it seems best to follow
upstream here unless we have a good reason to do otherwise.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Martin Jansa [Wed, 7 Jan 2015 14:06:48 +0000 (15:06 +0100)]
pulseaudio: use stricter PACKAGES_DYNAMIC
* I don't see any usage for libpulse-* packages
* adding '-' resolves the issue when we have separate recipe for
pulseaudio-modules-droid which isn't built to satisfy RDEPENDS
with the same name, because generic pulseaudio recipe seems to
RPROVIDE it through PACKAGES_DYNAMIC
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Awais Belal [Mon, 29 Dec 2014 09:46:48 +0000 (14:46 +0500)]
gstreamer1.0-omx: use mulitple SCMs to fetch submodules
The gstreamer omx package uses a submodule 'common' which
is fetched by the configure script. This approach fails
on non-network builds as the fetcher tries to look upstream
for the submodule.
We now use multiple SCMs, one for the main omx package and
the other for the 'common' submodule so it is available in
the downloads_dir for later use.
Signed-off-by: Awais Belal <awais_belal@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador [Tue, 30 Dec 2014 14:16:36 +0000 (12:16 -0200)]
image.bbclass: Remove 'set_image_autologin' function
The set_image_autologin function is GPE Login specific and the package
is not available in OE-Core so the function should be added in the
meta-gpe layer, if necessary. Drop this from the OE-Core as it is
unused.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This update the source code to the 2.5.2 version and also brings two
fixes from stable-2.5 branch. The update also allowed the removal of
some already applied patches from the metadata.
Doing this update, it fixes following build error:
,----
| make[1]: Entering directory `.../build-framebuffer/tmp/sysroots/imx23evk/usr/src/kernel'
|
| ERROR: Kernel configuration is invalid.
| include/generated/autoconf.h or include/config/auto.conf are missing.
| Run 'make oldconfig && make prepare' on kernel src to fix it.
|
| Building modules, stage 2.
| ./scripts/Makefile.modpost:42: include/config/auto.conf: No such file or directory
| make[2]: *** No rule to make target `include/config/auto.conf'. Stop.
| make[1]: *** [modules] Error 2
| make[1]: Leaving directory `.../build-framebuffer/tmp/sysroots/imx23evk/usr/src/kernel'
| make: *** [default] Error 2
`----
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yi Zhao [Wed, 31 Dec 2014 02:59:42 +0000 (10:59 +0800)]
oeqa/selftest: fix test_incremental_image_generation for changes in log output
test_incremental_image_generation case failed because the log output
chanaged:
FAIL: test_incremental_image_generation (oeqa.selftest.buildoptions.ImageOptionsTests)
----------------------------------------------------------------------
Traceback (most recent call last):
File
"/buildarea3/yzhao1/poky-build/meta/lib/oeqa/utils/decorators.py", line 90, in wrapped_f
return func(*args)
File
"/buildarea3/yzhao1/poky-build/meta/lib/oeqa/selftest/buildoptions.py", line 25, in test_incremental_image_generation
self.assertEqual(0, res.status, msg="No match for openssh-sshd in log.do_rootfs")
AssertionError: 0 != 1 : No match for openssh-sshd in log.do_rootfs
----------------------------------------------------------------------
Using re search instead grep
Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
