u-boot: basic support of dtb append for verified boot
This introduces a new uboot-sign.class to support U-Boot verified boot.
This part delivers the new class file, with related environment variables, and
a new task intended to run before do_install task and which performs the
concatenation of the u-boot-nodtb.bin and the device tree blob. The 'cat'
command used overrides the u-boot.bin in both DEPLOYDIR & build dir to
propagate the changes in later tasks (do_install, do_package, etc.)
Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
scripts/lib/argparse_oe: show subparser help for unrecognized args
As an example, `recipetool create foo bar baz` shows `recipetool: error:
unrecognized arguments: bar baz` and then displays the main help, not the help
for the create command. Fix by saving the subparser name and using it in
parse_args() to look up the subparser.
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Thu, 28 Apr 2016 10:58:10 +0000 (13:58 +0300)]
wic: use sparse_copy to copy partitions
Copied partition images into final partitioned image using
sparse_copy API. This method preserves sparseness of the
final image. It also makes wic much faster, as unmapped
blocks of the partition images are not copied.
[YOCTO #9099]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Thu, 28 Apr 2016 10:58:09 +0000 (13:58 +0300)]
wic: add sparse_copy API
In order to make wic images sparse sparse_copy function has been
copied from meta-ostro:
https://github.com/kad/meta-ostro/blob/master/meta-ostro/lib/image-dsk.py
This function uses filemap APIs to copy source sparse file into
destination file preserving sparseness.
The function has been modified to satisfy wic requirements:
parameter 'skip' has been added.
[YOCTO #9099]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Thu, 28 Apr 2016 10:58:08 +0000 (13:58 +0300)]
wic: add FIEMAP and SEEK_HOLE / SEEK_DATA APIs
In order to make wic images sparse set of APIs has been copied
from bmap-tools project.
filemap.py module is taken from bmap-tools project:
https://github.com/01org/bmap-tools/blob/master/bmaptools/Filemap.py
It implements two ways of get information about file block: FIEMAP
ioctl and the 'SEEK_HOLE / SEEK_DATA' features of the file seek
syscall.
Note that this module will be removed as soon as bmaptool utility
supports copying sparse source file into destination file (this is
already agreed with the maintainer of bmap-tools project).
[YOCTO #9099]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Thu, 28 Apr 2016 10:58:04 +0000 (13:58 +0300)]
wic: use truncate utility to create sparse files
Used truncate instead of dd to create wic images for the
following reasons:
- dd doesn't preserve sparseness
- truncate syntax is much more clear
- dd requires additional calculations of the image size
in blocks
- the way dd was used in the code is not always correct.
In some cases it was writing one block to the file which makes
it not 100% sparse.
[YOCTO #9099]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
packagegroup-core-lsb: fix whitespace in meta-qt* warnings
Without these extra space characters the messages are ill-formatted, i.e:
'The meta-qt3 layer should be added, this layer provides Qt 3.xlibraries.
Its intended use is for passing LSB tests as Qt3 isa requirement for LSB.'
Changes to:
'The meta-qt3 layer should be added, this layer provides Qt 3.x libraries.
Its intended use is for passing LSB tests as Qt3 is a requirement for LSB.'
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
security_flags: turn potential string format security issues into an error
Add "-Wformat -Wformat-security -Werror=format-security" to the default
SECURITY_CFLAGS to catch potential security vulnerabilities due to the
misuse of various string formatting functions.
These flags are widely used in distributions such as Fedora and Ubuntu,
however we have 15 recipes in OE-Core which fail to build with these
flags included and thus the flags are removed for:
- busybox
- console-tools
- cmake
- expect
- gcc
- gettext
- kexec-tools
- leafpad
- libuser
- ltp
- makedevs
- oh-puzzles
- stat
- unzip
- zip
[YOCTO #9488]
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current recipe creates inittab labels based off the device node name
of TTYs used as consoles. If those names exceed the 4 character label
limit of inittab, it will break. This change takes the last 4 chars of
the device names in order to avoid any errors.
[ YOCTO #9529 ]
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Fri, 22 Apr 2016 09:32:01 +0000 (12:32 +0300)]
wic: add system_id attribute to Partition
Added Partition.system_id attribute and initialized it
from parse result of wks option --system-id. It will be
used by the wic code below the call stack to set partition
system id.
[YOCTO #9096]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
wic: isoimage-isohybrid: add grubefi configfile support
The latest wic kickstart refactoring introduced a bootloader option
"--configfile" which lets wks' specify a custom grub.cfg for use
while booting. This is very useful for creating stuff like boot menus.
This change lets isoimage-isohybrid use --configfile; if this option is
not specified in a wks, it generates a default cfg as before.
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Wed, 20 Apr 2016 15:54:37 +0000 (16:54 +0100)]
busybox: don't build ar
As it's not 1978 anymore, nobody is using ar for anything apart from static
archives. If people are using static archives, then binutils provides a far
more capable ar.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Dengke Du [Tue, 19 Apr 2016 08:55:53 +0000 (04:55 -0400)]
bash: fixed ptest run-builtins failed
1. redirect the stderr output of the command exec with -l option to
/dev/null.
Because when we run command exec with -l option in builtins.tests,
it is a login shell, so it would read the file /etc/profile, that
file executes the /usr/bin/resize which added by commit: cc6360f4c4d97e0000f9d3545f381224ee99ce7d
The /usr/bin/resize is produced by busybox that source code resize.c
contains:
fprintf(stderr, ESC"7" ESC"[r" ESC"[999;999H" ESC"[6n");
In the end, it outputs an escape sequence to the stderr, so when we
compare the test output file /tmp/xx with builtins.right, it failed.
we need to redirect the stderr output to the /dev/null to solve the
problem.
2. ensure the target system contains the locales "en_US.UTF-8".
Because when run the run-builtins, it executes the source5.sub file
that contain:
LC_ALL=en_US.UTF-8
such as add the following to the local.conf:
IMAGE_LINGUAS_append = " en-us"
Signed-off-by: Dengke Du <dengke.du@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
IMAGE_CMD_xxx commands are always inlined within do_image_xxx.
When IMAGE_CMD_xxx is defined as a function (e.g. IMAGE_CMD_btrfs,
IMAGE_CMD_cpio, etc), a redundant copy of the function will be emitted
by default. Remove IMAGE_CMD_xxx 'func' flags to prevent that.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
linux-firmware: break out bnx2 mips firmware and WHENCE license
Break out the bnx2 mips firmware into an independent subpackage.
Since the bnx2 firmware license is contained in the common WHENCE file
also package that separately so that other firmware that is licensed
within that file may depend upon a standalone package containing it.
Signed-off-by: Christopher Clark <christopher.clark6@baesystems.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
do_split_package() constructs a list of packages that were created as it
iterates through the files, so if multiple files go into the same package then
the package will be repeated in the output.
Solve this by using a set() to store the created packages so that duplicates are
ignored.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Ruslan Bilovol [Wed, 13 Apr 2016 18:17:20 +0000 (21:17 +0300)]
kernel-uimage: change target image to vmlinux
Commit e69525: "kernel: Build uImage only when really
needed" hardcoded target kernel image to zImage for
case if uImage is generated by OpenEmbedded buildsystem.
However not all kernel architectures support zImage
target, for example AArch64 doesn't, so building of
kernel is failing on this step.
So instead of building zImage target that may not
exist for many architectures, build vmlinux target
that exists for all architectures.
Since kernel-uboot.bbclass uses vmlinux anyway for
creating image, there is no side effect on this change.
Signed-off-by: Ruslan Bilovol <rbilovol@cisco.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Configure autodetects libtomcrypt, but then it adds libtommath to
$LIBS and fails to link subsequent tests if it's unavailable.
| checking for pcre.h... yes
| checking for pcre_compile in -lpcre... no
| checking whether to build with PCRE library... no
| ++ executing failure action
| configure: error: unable to find usable PCRE library
Signed-off-by: Andreas Oberritter <obi@opendreambox.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
gobject-introspection: fix floating dep on python-mako
This was resulting in non-deterministic builds where g-ir-doc-tool may or may
not exist depending on whether python-mako was built previously. Add
a PACKAGECONFIG so the dependency is explicit.
Signed-off-by: Sujith H <sujith.h@gmail.com> Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Sujith Haridasan <Sujith_Haridasan@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
sdk.py: preserve packaging data when SDKIMAGE_FEATURES has "package-management"
This is not enabled by default, as there are still limitations and possible
issues with opkg (and rpm?) packaging data containing broken symlinks for
local indexes:
There are other use cases for the packaging data to be available in SDK,
since it provides comprehensive info about SDK's contents and in the case of
opkg and dpkg is all text-based and can be easily parsed by simple scripts.
Introduce new "package-management" flag for SDKIMAGE_FEATURES list (similar
to the one already used for IMAGE_FEATURES) that controls presence of the
packaging data in resulting SDK, while unifying this behavior across the
board for supported pkg managers - rpm, opkg, dpkg.
Signed-off-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Richard Purdie [Fri, 22 Apr 2016 13:51:22 +0000 (14:51 +0100)]
lib/oe/rootfs: Fix DEBUGFS generation when using opkg
When enabling extra DEBUGFS image generation with opkg, errors are seen like:
ERROR: core-image-minimal-1.0-r0 do_rootfs: Cannot get the installed packages list. Command '/media/build1/poky/build/tmp/sysroots/x86_64-linux/usr/bin/opkg -f /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/opkg.conf -o /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/rootfs --force_postinstall --prefer-arch-to-version status' returned 0 and stderr:
Collected errors:
* file_md5sum_alloc: Failed to open file /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/rootfs/etc/syslog-startup.conf.busybox: No such file or directory.
* file_md5sum_alloc: Failed to open file /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/rootfs/etc/fstab: No such file or directory.
basically for all CONFFILES in the image. This is due to the file rearranging
the rootfs generation code does. If we preserve the /etc directory,
the avoids the problem.
We need to tell copyfile to preserve symlinks since some are present in /etc.
[YOCTO #9490]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Tue, 19 Apr 2016 16:20:19 +0000 (17:20 +0100)]
boost: improve configure
Instead of adding a custom task (do_boostconfig) simply use the existing
do_configure.
Ensure that there are no relative paths in do_configure.
Instead of editing the user-config.jam sample file in the source tree (which is
entirely comments) and extending it on every build, create a new user-config.jam
in ${WORKDIR}.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Tue, 19 Apr 2016 16:07:59 +0000 (17:07 +0100)]
boost: delete the build directory before rebuilding
If there is an existing build directory when do enter do_compile() then delete
it, as it contains the previous build. If the rebuild was caused because
dependencies have changed we want to ensure that a rebuild actually happens.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Markus Lehtonen [Thu, 21 Apr 2016 11:03:26 +0000 (14:03 +0300)]
license.bbclass: make sure that image manifest dir exists
Previously, write_deploy_manifest() was relying on
write_package_manifest() to create the subdirectory for the manifest
file. However, do_rootfs may be an empty function so that
write_package_manifest() will not be called and the manifest
subdirectory will not be created, causing a build failure. This patch
fixes that by creating the directory hierarchy inside
write_deploy_manifest().
[YOCTO #9446]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Maxin B. John [Thu, 21 Apr 2016 09:24:07 +0000 (12:24 +0300)]
busybox: update flock behavior to match upstream
In "util-linux" implementation of flock, -c 'PROG ARGS' means run
"sh -c 'PROG ARGS'". At present, busybox implementation doesn't follow it.
That causes errors like the one listed below:
smart install /media/cronie-1.5.0-r0.core2_64.rpm
Updating cache...
<snip>
Output from cronie-1.5.0-r0@core2_64:
Running groupadd commands...
NOTE: cronie: Performing groupadd with [ --system crontab]
ERROR: cronie: groupadd command did not succeed.
error: %pre(cronie-1.5.0-r0.core2_64) scriptlet failed, exit status 1
error: install: %pre scriptlet failed (2), skipping
cronie-1.5.0-r0.core2_64
This is because we use flock command in preinstall scripts in packages
which create new groups/users.
[YOCTO #9496]
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Attempting to install ptest for valgrind fails with this error:
error: Can't install valgrind-ptest-3.11.0-r0.1@ppce500mc: no package
provides /this/is/a/bogus/interpreter/name
This is because one of the tests contains a bogus interpreter path on purpose
It is not enough to skip the QA warning about the missing dependency
but the dependency have to be completely removed.
Since this package contains oly tests it is safe to disable per file
dependencies and rely on the ones per package.
Signed-off-by: Tudor Florea <tudor.florea@enea.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
America/Caracas switches from -0430 to -04 on 2016-05-01 at 02:30.
(Thanks to Alexander Krivenyshev for the heads-up.)
Asia/Magadan switches from +10 to +11 on 2016-04-24 at 02:00.
(Thanks to Alexander Krivenyshev and Matt Johnson.)
New zone Asia/Tomsk, split off from Asia/Novosibirsk. It covers
Tomsk Oblast, Russia, which switches from +06 to +07 on 2016-05-29
at 02:00. (Thanks to Stepan Golosunov.)
Changes affecting past time stamps
New zone Europe/Kirov, split off from Europe/Volgograd. It covers
Kirov Oblast, Russia, which switched from +04/+05 to +03/+04 on
1989-03-26 at 02:00, roughly a year after Europe/Volgograd made
the same change. (Thanks to Stepan Golosunov.)
Russia and nearby locations had daylight-saving transitions on
1992-03-29 at 02:00 and 1992-09-27 at 03:00, instead of on
1992-03-28 at 23:00 and 1992-09-26 at 23:00. (Thanks to Stepan
Golosunov.)
Many corrections to historical time in Kazakhstan from 1991
through 2005. (Thanks to Stepan Golosunov.) Replace Kazakhstan's
invented time zone abbreviations with numeric abbreviations.
Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
they keep the versions in-sync. changes are all in data.
Changes affecting future time stamps
America/Caracas switches from -0430 to -04 on 2016-05-01 at 02:30.
(Thanks to Alexander Krivenyshev for the heads-up.)
Asia/Magadan switches from +10 to +11 on 2016-04-24 at 02:00.
(Thanks to Alexander Krivenyshev and Matt Johnson.)
New zone Asia/Tomsk, split off from Asia/Novosibirsk. It covers
Tomsk Oblast, Russia, which switches from +06 to +07 on 2016-05-29
at 02:00. (Thanks to Stepan Golosunov.)
Changes affecting past time stamps
New zone Europe/Kirov, split off from Europe/Volgograd. It covers
Kirov Oblast, Russia, which switched from +04/+05 to +03/+04 on
1989-03-26 at 02:00, roughly a year after Europe/Volgograd made
the same change. (Thanks to Stepan Golosunov.)
Russia and nearby locations had daylight-saving transitions on
1992-03-29 at 02:00 and 1992-09-27 at 03:00, instead of on
1992-03-28 at 23:00 and 1992-09-26 at 23:00. (Thanks to Stepan
Golosunov.)
Many corrections to historical time in Kazakhstan from 1991
through 2005. (Thanks to Stepan Golosunov.) Replace Kazakhstan's
invented time zone abbreviations with numeric abbreviations.
Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Otavio Salvador [Tue, 19 Apr 2016 20:17:39 +0000 (17:17 -0300)]
syslinux.bbclass: Remove APPEND from variable dependency
The value of APPEND is already being tracked and does impact on the
generated configuration file. This reverts the OE-Core:3c2d7ae5 commit
as it is not need anymore.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador [Tue, 19 Apr 2016 19:34:00 +0000 (16:34 -0300)]
syslinux.bbclass: The AUTO_SYSLINUXMENU value needs to be boolean
The python code expects AUTO_SYSLINUXMENU to be a boolean value,
otherwise the logic fails. This fixes the code comparing the value to
"1" which is the value expected by the shell script code, counterpart.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Tue, 19 Apr 2016 12:56:00 +0000 (13:56 +0100)]
perf: pass DESTDIR in EXTRA_OEMAKE
Instead of passing DESTDIR just in the make install invocation, pass it in
EXTRA_OEMAKE. This appears to stop perf from rebuilding at instal time for me,
which appears to be the trigger for the random build failure.
[ YOCTO #9182 ]
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Tue, 19 Apr 2016 02:09:35 +0000 (19:09 -0700)]
buildtools-tarball: set INHIBIT_DEFAULT_DEPS
The recipe doesn't need any default deps.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Mon, 18 Apr 2016 09:29:26 +0000 (02:29 -0700)]
xf86-video-omapfb: remove EXTRA_OECONF_armv7a
Fixe when build with armv7a:
gcc -c ../../git/src/sw-exa.c -fPIC -DPIC -o .libs/sw-exa.o
{standard input}: Assembler messages:
{standard input}:179: Error: selected processor does not support `vld1.u8 {d0},[r1]!' in ARM mode
{standard input}:182: Error: selected processor does not support `vld1.u8 {d1},[r4]!' in ARM mode
{standard input}:183: Error: selected processor does not support `vld1.u8 {q1},[r0]!' in ARM mode
{standard input}:184: Error: selected processor does not support `vzip.u8 d0,d1' in ARM mode
{standard input}:185: Error: selected processor does not support `vld1.u8 {q2},[ip]!' in ARM mode
{standard input}:186: Error: selected processor does not support `vst2.u8 {q0,q1},[fp]!' in ARM mode
{standard input}:187: Error: selected FPU does not support instruction -- `vmov.u8 q1,q2'
{standard input}:188: Error: selected processor does not support `vst2.u8 {q0,q1},[lr]!' in ARM mode
{standard input}:239: Error: selected processor does not support `vld1.u8 {d0},[r1]!' in ARM mode
{standard input}:242: Error: selected processor does not support `vld1.u8 {d1},[r4]!' in ARM mode
{standard input}:243: Error: selected processor does not support `vld1.u8 {q1},[r0]!' in ARM mode
{standard input}:244: Error: selected processor does not support `vzip.u8 d0,d1' in ARM mode
{standard input}:245: Error: selected processor does not support `vld1.u8 {q2},[ip]!' in ARM mode
{standard input}:246: Error: selected processor does not support `vst2.u8 {q0,q1},[fp]!' in ARM mode
{standard input}:247: Error: selected FPU does not support instruction -- `vmov.u8 q1,q2'
{standard input}:248: Error: selected processor does not support `vst2.u8 {q0,q1},[lr]!' in ARM mode
make[2]: *** [image-format-conversions.lo] Error 1
make[2]: *** Waiting for unfinished jobs....
../../git/src/omapfb-crtc.c: In function 'OMAPFBCrtcResize':
../../git/src/omapfb-crtc.c:34:12: warning: unused variable 'ofb' [-Wunused-variable]
OMAPFBPtr ofb = OMAPFB(pScrn);
^
../../git/src/omapfb-xv.c:66:43: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
{ XvSettable | XvGettable, 0, 0xffff, "XV_COLORKEY" },
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* add separate variable for configuration options generated from
PACKAGECONFIG setting, this helps other bbclasses and recipes
to take advantage of PACKAGECONFIG mechanism, without including
other options from EXTRA_OECONF
* e.g. meta-qt5 recipes are abusing EXTRA_OECONF to get options
from PACKAGECONFIG:
EXTRA_QMAKEVARS_PRE +=
but with
conf/distro/include/no-static-libs.inc
it means getting --disable-static as invalid option inside
EXTRA_QMAKEVARS_PRE as reported by Alexandre Belloni who tried
to use poky with meta-qt5.
* once we migrate all bbclasses and recipes to PACKAGECONFIG_CONFARGS
we should also restrict EXTRA_OECONF append only to autotools.bbclass
like I did for cmake.bbclass
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Markus Lehtonen [Tue, 19 Apr 2016 11:17:04 +0000 (14:17 +0300)]
license.bbclass: do write_deploy_manifest in image postprocessing
Call write_deploy_manifest() in image postprocessing phase, instead of
rootfs postprocessing. The reason being that not necessarily all
do_deploy tasks are dependencies of the do_rootfs and we might miss
something.
[YOCTO #9446]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Tue, 19 Apr 2016 11:09:11 +0000 (23:09 +1200)]
devtool: sdk-update: fix handling of UNINATIVE_CHECKSUM changes
If UNINATIVE_CHECKSUM changes over an SDK update, bitbake within the
extensible SDK will be broken because it will see that the matching
uninative tarball doesn't exist and if there is a default value of
UNINATIVE_URL it will attempt to download the file and will then fail
because the checksums don't match up; alternatively if no UNINATIVE_URL
is set then it'll also fail with an error about misconfiguration. To fix
this, add some logic to devtool sdk-update to download the matching
uninative tarball(s) for the checksum(s) in the newly fetched SDK
configuration.
Fixes [YOCTO #9301].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
toasterconf.json: Remove fido from supported configurations
It looks like the master branch will no longer build with the Fido
release, so remove all references to fido and make sure that the file
sets up local, master and jethro releases.
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Mon, 18 Apr 2016 12:27:24 +0000 (15:27 +0300)]
oetest: make console output more verbose
Added output of test runner to bitbake console output.
bitbake <image> -c testimage now reports test progress
to the console:
NOTE: Executing RunQueue Tasks
...
NOTE: recipe core-image-lsb-1.0-r0: task do_testimage: Started
core-image-lsb-1.0-r0 do_testimage: test_ping (oeqa.runtime.ping.PingTest) ... ok
core-image-lsb-1.0-r0 do_testimage: test_ssh (oeqa.runtime.ssh.SshTest) ... ok
...
----------------------------------------------------------------------
core-image-lsb-1.0-r0 do_testimage: Ran 38 tests in 785.100s
core-image-lsb-1.0-r0 do_testimage:
core-image-lsb-1.0-r0 do_testimage: OK (skipped=1)
Adding more output to the console should also prevent autobuilder to kill
long running tests as ab assumes that test is stuck if no console output
produced by it for a long time.
[YOCTO #8238]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
ISC DHCP 4.1.x before 4.1-ESV-R13 and 4.2.x and 4.3.x before
4.3.4 does not restrict the number of concurrent TCP sessions,
which allows remote attackers to cause a denial of service
(INSIST assertion failure or request-processing outage)
by establishing many sessions.
Paul Eggleton [Mon, 18 Apr 2016 03:27:07 +0000 (15:27 +1200)]
buildtools-tarball: fix perl being included when building with ipk
Due to some logic within opkg, a package with the name matching a
dependency will always win over a package with that name in RPROVIDES -
even if there is an RCONFLICTS (which is silently ignored), higher feed
priority and version. The end result is that buildtools gets perl
installed instead of the nativesdk-buildtools-perl-dummy package and
that perl (with missing dependencies) gets used in preference to the
host one, which is precisely what we were trying to avoid.
This is almost certainly a bug in opkg, especially as the other
package's dependencies aren't properly installed under these
circumstances either. However, specifying RREPLACES works around this,
and with no apparent side-effects is probably the safest solution for
now.
At the same time I noticed that in prepending to SDK_PACKAGE_ARCHS we
were actually ending up with a low priority for the dummy package feed
rather than a high one, so change to append it instead. This has no
effect on the packages that get installed at the moment, but should be
done in case the package manager behaviour changes to factor in the feed
priority in future.
Fixes [YOCTO #9469].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
