* with this patches most of these files are removed as well
Figuring out the sstate:xxx_compile ... (0 from 0 .tgz files for
compile suffix will be removed or 42310 from 47795 when counting also
.siginfo and .done files)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Sat, 1 Mar 2014 20:52:00 +0000 (21:52 +0100)]
sstate-cache-management: improve shown numbers of removed files
* deleted files were counting .siginfo and .done files, but total_files were counting only .tgz archives
so it could show confusing output like:
Figuring out the sstate:xxx_packagedata.tgz ... (21098 from 15162 files for packagedata suffix will be removed)
* split the counts and show both
* fix .sigdata sometimes used instead of .siginfo
* this will also show new "suffixes" which have only .siginfo files but
no .tgz, e.g.:
Figuring out the sstate:xxx_rm_work.tgz ... (0 from 0 .tgz files for
rm_work suffix will be removed or 0 from 107630 when counting also
.siginfo and .done files)
because now we're storing siginfo files from all intermediate tasks,
but they are not being removed by this script
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 2 Mar 2014 17:38:33 +0000 (17:38 +0000)]
bitbake.conf: Drop -fpermissive
Drop the -fpermissive C++ compiler flag. We've had this around for years, most
code should have been fixed long ago. Its possible some recipes may fail
however we can (and should) just use the flag where needed.
An OE-Core world build seems to work just fine with this change.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 2 Mar 2014 17:36:38 +0000 (17:36 +0000)]
autotools: Limit aclocal files to those in dependencies
We still occasionally see race issues with cp-noerror, and it copies
too many files, we should limit the the m4 files to those explicitly in
the DEPENDS for the recipe.
This change takes advantage of the BB_TASKDEPDATA data from bitbake to
only copy in those files listed in the manifest of the recipes in DEPENDS.
I've had this testing locally for some time, its ready for wider
review/testing.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 1 Mar 2014 15:17:50 +0000 (15:17 +0000)]
ltp: Work around parallel make race
As per the comments, the makefiles use make -C extensively and
this causes particular problems around the kernel syscall header. We
therefore ensure its up to date in advance.
Also, append the configure, not prepend since otherwise the configure
will rerun during the build due to the timestamps being outdated.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristian Iorga [Fri, 28 Feb 2014 15:43:34 +0000 (17:43 +0200)]
wpa-supplicant: upgrade to 2.1
- USE {BP} variable;
- Updated naming scheme;
- Updated copyright owners.
- Update defconfig file, is now in
sync with current version;
as such, more functionality can
be enabled for wpa-supplicant.
- removed register-autoscan-correctly.patch,
included in upstream.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 28 Feb 2014 15:49:13 +0000 (15:49 +0000)]
dpkg: Use bzip2-replacement-native
bzip2-native is in ASSUME_PROVIDED so the dependency that dpkg has doesn't correctly
trigger the build dependency. This shows up if you don't have bzip2 development
headers on your build machine and you:
Paul Eggleton [Fri, 28 Feb 2014 16:37:19 +0000 (16:37 +0000)]
ethtool: upgrade to 3.13
LIC_FILES_CHKSUM changed due to updating the COPYING license text
(still GPLv2, but new FSF address, some minor formatting changes,
reference to "GNU Library General Public License" -> "GNU Lesser
General Public License".
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 27 Feb 2014 18:01:44 +0000 (18:01 +0000)]
autotools-brokensep: Mark recipes with broken separate build dir support
This patch goes through the OE-Core recipes and marks those which use autotools
but don't support a separate build directory (${S} != ${B}). A new class,
autotools-brokensep is used for this purpose.
This doesn't introduce any change in behaviour in its own right.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Maxin B. John [Fri, 28 Feb 2014 11:53:33 +0000 (12:53 +0100)]
python: Backport CVE-2013-1752 fix from upstream
This back ported patch fixes CVE-2013-1752 for smtplib
Signed-off-by: Maxin B. John <maxin.john@enea.com> Reviewed-by: Sona Sarmadi <sona.sarmadi@enea.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 21 Feb 2014 05:01:00 +0000 (00:01 -0500)]
kernel-yocto: always checkout machine branch when existing validate_branches
The validate_branches routine is responsible for ensuring that the specified
SRCREV exists, and that the tree has been prepared for eventual patching
starting directly from that SRCREV.
On exit, the routine checks out the specified machine branch and the
preparation is complete .. except if a KMETA branch isn't used, we exit
early since the branch can't be validated.
To make the exit condition consistent for all cases, we can move the
KMETA validation inside a conditional and allow the same exit path for
both cases.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Also this patch adds symlinks to libgcc such that a GCC configured
by passing the target parameter without LIBCEXTENSION and ABIEXTENSION
specifiers to find the correct startup files from a libgcc configured
with these variables.
Roy Li [Thu, 27 Feb 2014 03:23:28 +0000 (11:23 +0800)]
dbus: proper error handler should be given after send_negotiate_unix_fd failed
Once send_negotiate_unix_fd failed, this failure will happen, since
auth->guid_from_server has been set to some value before
send_negotiate_unix_fd. send_negotiate_unix_fd failure will lead to
this auth be handled by process_ok again, but this auth->guid_from_server
is not zero.
Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Otavio Salvador [Wed, 26 Feb 2014 20:39:31 +0000 (17:39 -0300)]
uboot-config.bbclass: Skip the package if no valid configuration is found
The ValidError case makes parsing fail even if the U-Boot variant is
not in use for the specific machine and this is not desired. So
instead of raising a parsing error we skip the package.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Laurentiu Palcu [Wed, 26 Feb 2014 13:54:45 +0000 (15:54 +0200)]
adt_installer: fix issue with x86_64
When the default tune for x86_64 was changed to core2-64, the
environment setup script name did not contain x86 anymore. Hence, the
adt_installer failed for x86_64.
This commit contains a generic fix and is supposed to work with any kind
of machine/tune setting. It's actually extracting the environment script
name using 'opkg files meta-environment-MACHINE'. So, no need to do any
other sort of searches. We know exactly which is the environment setup
script for the specified machine.
Saul Wold [Wed, 26 Feb 2014 16:21:02 +0000 (18:21 +0200)]
core-image-minimal-initramfs: Use PACKAGE_INSTALL instead of IMAGE_INSTALL
PACKAGE_INSTALL is set from the IMAGE_INSTALL variable with some additional
items, since PACKAGE_INSTALL is intended to be more an internal variable, use
it instead of the IMAGE_INSTALL which is recommeded for installing additional
packages. This will allow the initramfs recipe to use a fixed set of packages
and not be affected by IMAGE_INSTALL.
Saul Wold [Wed, 26 Feb 2014 13:49:52 +0000 (15:49 +0200)]
systemd: sed installed file instead of original
When we change the ROOT_HOME the sed regex does not match if we are running
the do_install() a second time, so copy the units files first to a pre_sed,
so that the next time, we can copy the the original so that the sed regex
is matched correctly in the original
Saul Wold [Wed, 26 Feb 2014 13:49:29 +0000 (15:49 +0200)]
base-passwd: sed installed file instead of original
When we change the ROOT_HOME the sed regex does not match if we are running
the do_install() a second time, so sed the installed file and preserve the original
so that the sed regex is matched correctly in the original
Saul Wold [Wed, 26 Feb 2014 13:49:16 +0000 (15:49 +0200)]
base-files: sed installed file instead of original
When we change the ROOT_HOME the sed regex does not match if we are running
the do_install() a second time, so sed the installed file and preserve the original
so that the sed regex is matched correctly in the original
I was asked why we had these copy and update_data calls. I can
offer no good explanation other than them perhaps once being needed
for reasons long since forgotten and superceeded.
With modern bitbake these should not be needed and shouldn't have been
for a long time. Lets therefore remove them and simplify the code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Richard Purdie [Wed, 26 Feb 2014 11:35:43 +0000 (11:35 +0000)]
security-flags: Deal with powerpc build issues
Building powerpc machines with the standard security flags generated numerous
build failures. Use a reduced set of flags for now to avoid linker issues
and other compile failures.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Tue, 25 Feb 2014 09:44:05 +0000 (17:44 +0800)]
dpkg-compiler.m4: remove -Wvla (fix build on CentOS 5.8)
Remove the -Wvla flag from the set of compiler warning flags, since gcc
on old host systems such as CentOS 5.8 doesn't support it, and it
causes a build error for dpkg-native.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Donn Seeley [Tue, 25 Feb 2014 09:44:04 +0000 (17:44 +0800)]
dpkg: fix a link problem for dpkg-native on CentOS 5.8
[ CQID: WIND00392830 ]
CentOS 5.8 provides the kernel support and headers for the
sync_file_range() syscall, but glibc 2.5 doesn't implement the
sync_file_range() syscall stub, so we can't link dpkg-native. Add a
patch that makes dpkg require a glibc version >= 2.6 in order to use
sync_file_range().
Signed-off-by: Donn Seeley <donn.seeley@windriver.com> Signed-off-by: Lei Liu <lei.liu2@windriver.com> Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com> Signed-off-by: Jeff Polk <jeff.polk@windriver.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Tue, 25 Feb 2014 09:44:03 +0000 (17:44 +0800)]
grub: exclude .pc from POTFILES.in (fix build on CentOS 5.8)
Exclude the .pc from po/POTFILES.in since quilt uses "patch --backup",
which will create the backup file under .pc, this may cause unexpected
errors, for example, on CentOS 5.x, if the backup file is null
(newfile), it's mode will be 000, then we will get errors when xgettext
try to read it.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stefan Stanacar [Tue, 25 Feb 2014 10:46:11 +0000 (12:46 +0200)]
oeqa/targetcontrol: properly get the host ip
For the SimpleRemote target where we need the host ip and
it wasn't set in conf, we tried to determine it automatically.
However ip route output isn't the same for every network, we
need the last field from the first line.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Laurentiu Palcu [Tue, 25 Feb 2014 12:36:17 +0000 (14:36 +0200)]
package_manager.py: create index files for all backends in PACKAGE_CLASSES
The previous implementation was checking IMAGE_PKGTYPE and created the
index files just for the backend used to create the image. Apparently,
'bitbake package-index' should attempt to create the index files for all
backends specified in PACKAGE_CLASSES.
[YOCTO #5827]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the output from opkg-query-helper.py is empty, output.split('\n')
would result in a list containing one element which is an empty string
while iterating over each line in the output. An exception is then
thrown by the line:
pkg, pkg_file, pkg_arch = line.split()
with the message:
Exception: ValueError: need more than 0 values to unpack
To avoid this, we add a condition to only split the output if it isn't
empty.
Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 24 Feb 2014 15:10:49 +0000 (15:10 +0000)]
sstate: Drop 'SafeDep' code from setscene validation function
I have a feeling this code exists from the time before we had proper
coverage of one sstate task by another task. At that time it was a
"poor" persons version of that idea, we now have much better
code internal to bitbake which handles this.
Worse, this code actually breaks certain rebuild scenarios,
e.g.:
Richard Purdie [Mon, 24 Feb 2014 16:12:07 +0000 (16:12 +0000)]
package: Drop do_package_write task
The reasons this task was introduced are lost in the mists of time. It
allowed for the a single "package_write" task instead of spelling out
the explicit package backends, however in all but one case we do that
anyway.
As such as might as well give in and delete the task, converting that
single reference into explicit dependencies.
This gives bitbake a bit less work to to when processing the runqueue
since there are less tasks (but more dependencies in some cases).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 24 Feb 2014 16:05:46 +0000 (16:05 +0000)]
classes/utility-tasks: make do_listtasks a little more friendly
* Sort the list so it's at least in some form of logical order. I looked
at sorting by dependencies, but that's a topological sort, and given
no such function is shipped as part of the python standard libraries
it would seem excessive to pull one in just for this. In any case, I'm
not sure that for the data we have this would lead to any particularly
pleasing result.
* Show the doc values as defined in documentation.conf (where present)
as a description
Addresses [YOCTO #4856].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 24 Feb 2014 16:05:45 +0000 (16:05 +0000)]
classes/package_tar: fix conflicts with package_deb / package_ipk
Avoid tar noticing that the directory is changing when
do_package_write_deb or do_package_write_ipk are running at the same
time as do_package_write_tar (because DEBIAN and CONTROL are being added
and removed while tar is running so the directory changes).
Fixes [YOCTO #5652]
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 24 Feb 2014 16:05:44 +0000 (16:05 +0000)]
classes/sstate: fix taints being undone on execution of sstate tasks
The code here that deletes stamps was also deleting the taint files; so
forcing an sstate task with -f would force it to execute and then
because the taint file was deleted in the process, the next execution
would simply restore the output from sstate again. We need to exclude
the taint files just like we did in bb.build.make_stamp().
Fixes [YOCTO #5805].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Mon, 24 Feb 2014 09:35:55 +0000 (04:35 -0500)]
lz4: fix CC
It defined the CC to ${TARGET_PREFIX}gcc which lost the --sysroot and was
incorrect, it would cause unexpected errors, we should define it as CC=${CC}.
[YOCTO #5869]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jonathan Liu [Fri, 21 Feb 2014 04:43:38 +0000 (15:43 +1100)]
image_types.bbclass: fix cpio IMAGE_CMD to preserve working directory
The working directory is changed in a subshell when executing cpio to
preserve the working directory for any subsequent commands. This is to
keep the working directory consistent when generating multiple image
types.
Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hongxu Jia [Fri, 21 Feb 2014 06:23:08 +0000 (14:23 +0800)]
rootfs.py: tweak _multilib_sanity_test for ipk incremental image generation
The _multilib_sanity_test installs multilib packages in a temporary
root fs, and compare with the current image to figure out duplicated
files that come from different packages.
While incremental image generation enabled and the previous image
was existed, there was an Multilib check error:
...
ERROR: Multilib check error: duplicate files tmp/work/qemux86_64-poky-
linux/core-image-minimal/1.0-r0/multilib/lib32/lib/libc.so.6 tmp/work/
qemux86_64-poky-linux/core-image-minimal/1.0-r0/rootfs/lib/libc.so.6
is not the same
...
The reason is the file in the existing image has been prelinked by
previous image generation and the file in a temporary root fs is not
prelinked, even though both of them came from the same package, the
Multilib check failed.
Hongxu Jia [Fri, 21 Feb 2014 06:21:36 +0000 (14:21 +0800)]
rootfs.py: support BAD_RECOMMENDATIONS for ipk incremental image generation
While incremental image generation enabled and the previous image is
existed, if BAD_RECOMMENDATIONS is changed, the operation on the
existing image is complicated, so remove the old image in this situation.
The same with PACKAGE_EXCLUDE and NO_RECOMMENDATIONS.
Hongxu Jia [Fri, 21 Feb 2014 06:12:52 +0000 (14:12 +0800)]
package_manager.py: support ipk incremental image generation
Add the following three functions to OpkgPM class:
- The 'dummy_install' is used to dummy install pkgs, and returns the log
of output;
- The 'backup_packaging_data' is used to back up the current opkg
database;
- The 'recover_packaging_data' is used to recover the opkg database
which backed up by the previous image creation;
Tweak 'remove' function in OpkgPM class, which the options for remove
with dependencies was incorrect.
Tweak 'handle_bad_recommendations' function in OpkgPM class:
- Fix none value check;
- Add the existance check of opkg status file;
Hongxu Jia [Fri, 21 Feb 2014 06:10:17 +0000 (14:10 +0800)]
manifest.py: add create_full for OpkgManifest class
The function create_full creates the manifest after the package in
initial manifest has been dummy installed. It lists all *to be
installed* packages. There is no real installation, just a test.
Saul Wold [Thu, 20 Feb 2014 20:55:09 +0000 (12:55 -0800)]
runqemu: Ensure ROOTFS path is absolute
There is a problem if a relative path is passed to the kernel for NFS usage
that it will not correctly find it, so ensure that the ROOTFS path is absolute.
Valentin Popa [Thu, 20 Feb 2014 10:09:36 +0000 (12:09 +0200)]
gtk+3: upgrade to 3.10.7
(*) removed patches that were already
commited upstream
(*) added new patch to solve the build issue
(*) changed the package URL because
the old one is unreliable.
