Khem Raj [Fri, 4 May 2012 21:56:33 +0000 (14:56 -0700)]
classes/mirrors.bbclass: Point snapshot.debian.org mirror to working location
If you point to snapshot.debian.net/archive/pool then it will fetch
you a html page which will end up in corrupt download. The locations
have changed for archives and here we point the mirror to right
location.
Peter Seebach [Tue, 15 May 2012 18:16:35 +0000 (13:16 -0500)]
tcmode-external-csl.inc: specify the path you couldn't find
While misconfiguring toolchains, I noticed that one of the
diagnostic messages gave me a little less information than I'd
like about what I'd done wrong. Displaying the glob pattern
that couldn't be matched turns out to make it a lot easier to
figure out what you did wrong. (Answer: Not enough coffee.)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Peter Seebach [Tue, 15 May 2012 18:16:34 +0000 (13:16 -0500)]
tcmode-external-csl.inc: Allow for overrides
Wind River uses binary toolchains provided by Code Sourcery, but which
have different values for a couple of the preset variables than the
generic toolchains the external-csl toolchain feature supports. If
these values were ?= assignments, we could just assign values to them
and share the code, rather than keeping modified copies.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Fri, 11 May 2012 17:17:54 +0000 (12:17 -0500)]
sstate.bbclass: Optimize the generation and install path fixups
The fixmepath file that is generated contains a list of all of the files
that need their paths fixed. In the previous version the fixmepath was
generated to include all of the files that sed may have changed. In the
new version, we first grep the files to see if they contain a path that
needs to be changed, only then do we perform the sed operation on those files.
This results in a modest performance increate in the creation of the sstate
file. The following numbers include the do_package and do_populate_sysroot
tasks on the perl recipe.
Before the change:
real 4m23.018s
user 1m57.067s
sys 1m33.327s
After the change:
real 4m13.083s
user 1m54.062s
sys 1m26.064s
However, a more significnt performance gain is felt during the
extraction/install of sstate cache files, as the fixmepaths file now has a
significantly smaller list of files to modify.
Before the change:
real 0m39.798s
user 0m11.158s
sys 0m12.642s
After the change:
real 0m25.511s
user 0m8.408s
sys 0m5.077s
(All numbers above were recorded with a cold filesystem cache on a machine
with 12 GB of ram.)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jason Wessel [Mon, 14 May 2012 21:17:40 +0000 (16:17 -0500)]
bitbake.conf: Add CCACHE_DIR to BB_HASHBASE_WHITELIST
The location of the ccache should not affect the sum in the sstate
files.
The end user should be free to use an external ccache via defining
CCACHE_DIR to a new value in local.conf or using the default per
package local ccache in the temp directory.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 15 May 2012 17:49:09 +0000 (18:49 +0100)]
gdk-pixbuf: Allow empty -xlib package
There are things that depend on the -xlib package. There are two
possible ways to fix this, either recommend them instead of depending
on them, or allow the package to be empty. I'm doing the latter
since its a bit cleaner and less invasive.
This library is a bit pointless which is why there is little point
in adding the x dependency in the non-lsb case. If it becomes widly
used we can rethink this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Peter Seebach [Mon, 14 May 2012 22:49:23 +0000 (17:49 -0500)]
runqemu: replace bashism with working shell idiom
The =~ operator is not one of my favorites, not just due to portability
issues, but because it's not well known, and a lot of people might
not expect a regex operator.
The canonical shell idiom for this is to use case with alternation
and wildcards. As a side note, if you are matching anything containing
core-image-sato, you don't need to also check for core-image-sato-sdk.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart [Tue, 15 May 2012 00:10:34 +0000 (17:10 -0700)]
ofono: Add python-pygobject to ofono-tests package DEPENDS
Some of the ofono-tests python scripts, such as test-modem and
receive-sms (22 in total) import gobject. Make the ofono-tests package
depend on python-pygobject.
Tested on the meta-intel fri2 BSP in a core-image-sato image. Assorted
ofono tests run correctly.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a + character appears in a version specification within the list of
package dependencies, the version will not be removed from the list in
list_package_depends/recommends leading to garbage appearing in the
dependency graphs generated by buildhistory. To avoid any future
problems due to unusual characters appearing in versions, change the
regex to match almost any character.
Fixes [YOCTO #2451].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 12 May 2012 10:10:33 +0000 (11:10 +0100)]
package.bbclass: Drop dubious use of packages[0] from do_split_packages and do_split_locales
As the comment says, using packages[0] is rather broken and can be incorrect,
as demonstrated by the recent gdk-pixbuf change. Replacing it with PN is
a bit more correct and more likely to do what was originally intended
by this function.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 12 May 2012 07:41:44 +0000 (08:41 +0100)]
oe-buildenv-internal: Fix BITBAKEDIR changes to work with existing autobuilder scritpts
The BITBAKEDIR change does not work well when the script is sourced from another script
since $2 may be unrelated. This change adds the logic onto the BDIR conditional and
which more external scripts would set, hence avoiding the problem.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Tue, 8 May 2012 19:10:17 +0000 (15:10 -0400)]
kernel-yocto: export GUILT_BASE to devshell
One of the patch backends to linux-yocto is guilt, which normally
tracks patches under .git. But .git isn't something that can be
checked into a SCM and repeated. So it has been moved under meta/patches
and committed to the meta branch.
If devshell is used, GUILT_BASE isn't set, so patch manipulations will
fail. We export GUILT_BASE and point it at the meta directory when
devshell is invoked for linux-yocto.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Richard Purdie [Thu, 10 May 2012 08:24:22 +0000 (09:24 +0100)]
package.bbclass: Drop EXPORT_FUNCTIONS use against mapping_rename_hook
The usage of this function renaming and it being called using
bb.build.exec_func() causes needless indirection loops, confusing log
files and seems generally pointless.
This simplification makes the process much simpler and faster. I can't
come up with a good reason why the export_functions functionality is
needed for this function.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jason Wessel [Wed, 9 May 2012 13:46:32 +0000 (08:46 -0500)]
.gitignore: add /bitbake to the ignore list for external distributions
External distributions based on the oe-core will typically include
bitbake in the top level directory. The idea is to make it easy
for external distributions to easily assemble a distribution
with a pristine version of oe-core, add avoid the git untracked messages:
# Untracked files:
# (use "git add <file>..." to include in what will be committed)
#
# bitbake/
[RP: remove leading slash] Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In a pathological case, lots of files to process, the sstate_installpkg
performance was very poor. It interated over each file and ran 3
individual sed commands per file. Changing this to keep iterating
but running only a single command took about 1/3 time time.
However, when looking at the corresponding sstate_hardcode_path
function, it was clear we could optimize this further.
Using the same encoding logic to specify only the minimumal sed
operation necessary, and using xargs to avoid the os.system call the
install step was able to be performed in 13% of the original time.
Example timing numbers for perl:
3m7s original code
1m20s single sed, but interating
0m26s using xargs and limited sed
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Xiaofeng Yan [Fri, 11 May 2012 07:23:15 +0000 (15:23 +0800)]
gdk-pixbuf: Add --with-x11 when building lsb image
LSB Test Suite complains "No library libgdk_pixbuf_xlib-2.0.so.0" \
because of having "--without-x11" for gdk-pixbuf_2.24.1.bb.
Use the linuxstdbase override and also make it conditional on x11 \
being in DISTRO_FEATURES for passing lsb test.
Split libgdk_pixbuf_xlib to a single package.
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Xiaofeng Yan [Fri, 11 May 2012 07:23:12 +0000 (15:23 +0800)]
task-core-lsb: Add libgdk-pixbuf-xlib to core-image-lsb
LSB Test Suite complains "No library libgdk_pixbuf_xlib-2.0.so.0" \
which are created by gdk-pixbuf_2.24.1.bb.
So add this library to core-image-lsb for passing lsb test.
[RP: Fix whitespace] Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Nitin A Kamble [Wed, 9 May 2012 20:42:45 +0000 (13:42 -0700)]
eglibc: fix build with poky-tiny distro
This fixes bug [YOCTO #2443]
The prototype of findidx() has changed, but the code in xregex.c is
still using the old prototype. This issue stayed hidden because this
code only gets excercised when OPTION_POSIX_REGEXP_GLIBC is disabled
in the eglibc configuration.
See the patch for further information.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Saul Wold [Wed, 9 May 2012 18:08:57 +0000 (11:08 -0700)]
eglibc: Add patch to fix /var installation location
This address the packaging issues since it's installed in the wrong place
ERROR: For recipe eglibc-nativesdk, the following files/directories were installed but not shipped in any package:
ERROR: /var
ERROR: /var/db
ERROR: /var/db/Makefile
Peter Seebach [Wed, 9 May 2012 20:14:41 +0000 (15:14 -0500)]
sanity.bbclass: Detect empty $PATH components too
Empty components in $PATH have the same effect as a . in $PATH,
and are a common side-effect of inserting a misspelled or unset
shell variable in $PATH.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Saul Wold [Wed, 9 May 2012 18:08:57 +0000 (11:08 -0700)]
eglibc: Add patch to fix /var installation location
This address the packaging issues since it's installed in the wrong place
ERROR: For recipe eglibc-nativesdk, the following files/directories were installed but not shipped in any package:
ERROR: /var
ERROR: /var/db
ERROR: /var/db/Makefile
This introduces a sanity check for the toolchain, which verifies
each tuning (including any multilibs), producing meaningful diagnostics
for problems, and also provides some higher-level tuning features.
The TUNEVALID and TUNECONFLICT/TUNECONFLICTS settings were not
implemented. Listed one or two missing features in TUNEVALID,
also (in a previous patch) fixed the references to
features which didn't exist.
This patch also provides a whitelisting mechanism (which is completely
unused) to allow vendors providing prebuilt toolchain components to
restrict tunings to those based on or compatible with a particular ABI.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Otavio Salvador [Wed, 2 May 2012 01:00:01 +0000 (22:00 -0300)]
qt4-graphics-system: set graphic system in profile instead of X11 session
To allow the use of Qt applications started manually to use the
configured graphics system the setting needs to be available in user
environment. This moves the setting to /etc/profile.d ensuring it is
set and available. This allow the removal of x11-common as dependency.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Martin Jansa [Tue, 8 May 2012 22:53:38 +0000 (15:53 -0700)]
kmod: fix upgrade path from module-init-tools
* PROVIDES does not need _${PN}
* CONFLICTS should be RCONFLICTS
* opkg needs RREPLACES to automatically remove older module-init-tools
instead of just reporting it conflicts with kmod
SHR root@gjama ~ $ opkg install kmod
Installing kmod (7+git02629fa02e96763db7460a930239cc93649a52f8-r0.0) to root...
Downloading http://jama.dyndns-home.com/org.openembedded.shr-core//armv4t/kmod_7+git02629fa02e96763db7460a930239cc93649a52f8-r0.0_armv4t.ipk.
Removing package module-init-tools-depmod from root...
update-alternatives: removing //sbin/depmod as no more alternatives exist for it
Removing package module-init-tools from root...
update-alternatives: Linking //sbin/insmod to ../bin/busybox
update-alternatives: Linking //sbin/modprobe to ../bin/busybox
update-alternatives: Linking //sbin/rmmod to ../bin/busybox
update-alternatives: removing //sbin/modinfo as no more alternatives exist for it
update-alternatives: removing //bin/lsmod as no more alternatives exist for it
update-alternatives: Linking //sbin/lsmod to ../bin/busybox
Configuring kmod.
update-alternatives: Linking //sbin/insmod to /sbin/insmod.kmod
update-alternatives: Linking //sbin/modprobe to /sbin/modprobe.kmod
update-alternatives: Linking //sbin/rmmod to /sbin/rmmod.kmod
update-alternatives: Linking //sbin/modinfo to /sbin/modinfo.kmod
update-alternatives: Linking //bin/lsmod to /bin/lsmod.kmod
update-alternatives: Linking //sbin/lsmod to /bin/lsmod.kmod
update-alternatives: Linking //sbin/depmod to /sbin/depmod.kmod
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Wed, 9 May 2012 03:42:24 +0000 (23:42 -0400)]
kern-tools: fix do_patch errors
The linux-yocto repository and scripts can support a mode of
meta data management that merges a base meta branch to every
BSP branch. In this case, the scripts don't have to restore
a checkpoint for the meta data to be globally accessible.
The decision to restore or not is made based on whether or
not the meta branch is part of all branches or not.
The linux-yocto recipes have a sanity check to determine if
the requested SRCREV for meta data matches the head of the
meta branch (via do_validate_branches). If the wrong commit
is at the head, the meta branch is moved aside and the branch
reset to the right commit. This creates two meta branches that
contain the base meta data.
The test for integrated meta data mistakes this for a globally
merged set of meta data and doesn't restore the checkpoint, which
leads to build failures.
The immediate fix is to allow two branches to have the meta
data. The long term fix is to make the detection only consider
if the build branch contains the meta data.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Mon, 30 Apr 2012 04:02:17 +0000 (00:02 -0400)]
kern-tools: integrate minor fixes
Updating the SRCREV to pick up two minor fixes:
1/2:
kgit-init: correct spelling of createme
kgit-init copies the kern-tools scripts and intends to copy createme.
The typo is in the usage() of updateme as well.
Signed-off-by: Michel Thebeau <michel.thebeau@windriver.com>
2/2:
kconf_check: fix bad quoting around missing_required.cfg
missing_required.cfg won't have it's path truncated (if applicable), since
the quoting it wrong.
Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Thu, 22 Mar 2012 20:00:08 +0000 (16:00 -0400)]
linux-yocto: streamline support for multiple upstream repo types
In order to support repositories of various types (with or without
meta data, branched, pristine, custom, etc) information about the
type of processing that is required was passed to the processing
phases via variables.
The combination of variables involved in coordinating the processing
creates a learning curve and overly complicates recipe extensions.
With minor tweaks to the kern-tools, adding flexibility and keying
off the existence of the meta branch it is possible to remove all
of the variables that were added to support different repository
types.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Fri, 4 May 2012 14:40:34 +0000 (10:40 -0400)]
linux-yocto/3.2: configuration and pch merge
Updating the 3.2 SRCREVs to import the following meta/config
changes:
6b3d4e0 meta: add mei feature 519abac meta: add usb/uhci-hcd feature a67c5a3 meta/crownbay: use usb features 0855066 meta: add usb/ohci-hcd feature 15f1a99 meta: add usb/ehci-hcd feature 8fa6408 meta: add usb/xhci-hcd feature c724a55 meta: add usb/base feature b55b3a1 sys940x: Cleanup sys940x.scc 93f2e97 sys940x: Use PHYSICAL_START of 0x200000 to boot aaa034b sys940x: Add common standard and preempt-rt features e2b1286 sys940x: Add efi-ext to standard and preempt-rt configs d188c21 sys940x: Move emgd-1.10 data to the standard scc file 72d9369 fri2: Cleanup fri2-$KTYPE.scc files re efi-ext.scc dbcb120 fri2: Use emgd-1.10 feature and branch
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Zhai Edwin [Tue, 8 May 2012 14:43:49 +0000 (22:43 +0800)]
pango: Fix modules load failure in multilib environment
Multi-libs of Pango need different modules, thus different config files and
utils. This patch separate config file and utils with different MLPREFIX to
avoid conflict.
[YOCTO #2356] got fixed.
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Garman [Mon, 7 May 2012 22:49:14 +0000 (15:49 -0700)]
opensp: upgrade to 1.5.2
Removed all patches, they've been integrated upstream. :)
Added --disable-doc-build to prevent creation of docs, which
otherwise fails with the following configure error:
could not find xmlto; set XMLTO or consider --disable-doc-build
Removed configure_prepend step that was deleting the m4/ directory,
since some macros needed for the build are defined there, and I've
not encountered any problems with keeping them there in my testing.
Signed-off-by: Scott Garman <scott.a.garman@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dongxiao Xu [Tue, 8 May 2012 05:28:30 +0000 (13:28 +0800)]
qt4: move functions from python to shell style
In qt4's do_configure operation, it will refer to some variables that
are derived from 'd', however these variable values may be not correct
in multilib case since the extraction of these variables happens before
the multilib handler.
The fix is to move these python style functions back to shell style.
Richard Purdie [Mon, 7 May 2012 09:50:03 +0000 (09:50 +0000)]
connman: Disable tist plugin on powerpc
This plugin doesn't build on powerpc due to powerpc's terminal ioctl defintions
being incompatible with assumptions being made by this module. Until someone has
need and can test this on powerpc, disabling is the safest option.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Sun, 6 May 2012 07:28:23 +0000 (09:28 +0200)]
evolution-data-server: enable deprecated glib API
* we have very old version and deprecated g_atexit is used even in current master
http://git.gnome.org/browse/evolution-data-server/log/libedataserver/e-categories.c
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* LIC_FILES_CHKSUM change is only because PCRE was upgraded and now
pcre.h says "Copyright (c) 1997-2012 University of Cambridge" instead
of 2010 and COPYING file
"Please see the file LICENCE in the PCRE distribution for licensing
details." but LICENSE file is not part of glib distribution (but still
BSD in standalone PCRE)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Darren Hart [Wed, 2 May 2012 04:14:18 +0000 (21:14 -0700)]
initrdscripts: Update install.sh to work with mmc devices
Fixes [YOCTO #2385]
The installer only searches for hd[ab] sd[ab]. Some newer BSPs have mmcblk
devices that should be used as the install target. These devices also have a
partition prefix (mmcblk0p1 instead of mmcblk01). As they are detected
asynchronously, it is necessary to add the rootwait kernel parameter to avoid
a race condition trying to mount the root device.
As BSPs like the FRI2 and the sys940x have mmc devices and will have a 1.2
release, we should push this to 1.2.1. The changes are perfectly contained and
easily verified.
Test for an mmcblk device and add the p partition prefix if necessary. Add the
rootwait kernel parameter when an mmcblk device is detected. Replace the series
of explicit umount commands with a single umount using a wildcard. This will
find all the partitions and will not try to unmount non-existant devices. Avoid
copy and paste errors by replacing /dev/${device}${pX} references with the
previously assigned rootfs, bootfs, and swap variables.
These changes have been tested on the FRI2 Sato image which installed to
/dev/mmcblk0 as well as the N450 Sato image which installed to /dev/sda. Both
were successful.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Scott Garman <scott.a.garman@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If build system has those libraries installed
gcc configure will pick them up. We want
consistent builds so we disable them since we
do not (yet) support them
Signed-off-by: Andreas Oberritter <obi@opendreambox.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some versions of the screen utility provided from the host OS vendor
write the socket directory to $HOME/.screen. When using a shared home
directory across many servers, one sets the SCREENDIR environment
variable to avoid collisions in the shared home directory. This
results in problems launching a devshell where it is not entirely
obvious what happened because the SCREENDIR environment variable
got stripped from the environment prior to setting up the screen
in detached mode.
Example:
% bitbake -c devshell busybox
# ...Please connect in another terminal with "screen -r devshell"
% screen -r devshell
There is no screen to be resumed matching devshell.
The temporary work around was to do something like:
sh -c "unset SCREENDIR; screen -r devshell"
This patch adds SCREENDIR to the white list to ensure screen
works properly on systems where a developer needs to use
the SCREENDIR with shared home directories.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Peter Seebach [Wed, 2 May 2012 01:45:10 +0000 (20:45 -0500)]
conf/machine: Clean up configuration values.
This cleans up and/or corrects a few values from machine includes
for consistency with future toolchain sanity checks, and also adds
the TUNEVALID and TUNECONFLICTS to documentation.conf.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Fixes the following error after a system library upgrade
| .../mipsel-oe-linux/4.6.4/cc1: error while loading shared libraries: libppl.so.10: cannot open shared object file: No such file or directory
Signed-off-by: Andreas Oberritter <obi@opendreambox.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
