Richard Purdie [Fri, 16 Nov 2018 09:33:28 +0000 (09:33 +0000)]
oeqa/utils/httpserver: Rework to avoid hangs and improve logging
testimage.bbclass installs a SIGTERM handler which conflicts with the
use of multiprocessing here. This is paritcularly problematic if the http
service is terminated before its started and hence before its had a chance
to reset the default signal handler (as the code was written).
Instead, temporarily remove testimage's handler whilst forking the http process
which means the correct handler is installed and won't deadlock.
Also take the opportunity to add in some log messages about the server start
and shutdown so that future debugging is easier and its clearer what the code
is doing.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ming Liu [Wed, 14 Nov 2018 19:05:31 +0000 (20:05 +0100)]
wic: bootimg-efi: add a title source parameter
Sometimes the users might want to change the title showing on UEFI
booting screen, so far it's hard-coded to 'boot'.
There is not a easy way to customize it in current design, I tried
firstly with '--configfile', but that does not work with --use-uuid,
since the later option will generate a UUID and write it to boot
config, only when the former option is not enabled.
So a new source parameter 'titile' is added in this patch, it defaults
to 'boot' to be consistent with the original title.
Signed-off-by: Ming Liu <liu.ming50@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ming Liu [Wed, 14 Nov 2018 19:04:59 +0000 (20:04 +0100)]
image.bbclass: add a missing blank
When calling d.appendVarFlag, a blank is needed or else it could mess
up the later appended variables.
Reported-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Ming Liu <liu.ming50@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 15 Nov 2018 11:28:11 +0000 (11:28 +0000)]
lib/oe/package_manager: Avoid race problems when calling list_pkgs()
list_pkgs() for rpm calls RpmPM() which would try and create a copy of the
package feed. This can be called for example from buildhistory whilst some
other task may be working on an SDK or image construction, causing the package
feed to disappear part way through an operation.
Avoid the need to copy the package index just to list the installed
packages, avoiding the race.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
meta/lib/oeqa/selftest/context.py:8: DeprecationWarning: the imp module is deprecated in favour of importlib; see the module's documentation for alternative uses
import imp
In this case importlib is a direct replacement.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changqing Li [Wed, 14 Nov 2018 09:46:03 +0000 (17:46 +0800)]
oepydevshell-internal.py: decode only when readdata is valid
fix below problem:
pydevshell raises exception when maximize the python shell window.
when click maximize, rlist of select return ready object, but the
pty.read is None, so throw exception of 'NoneType' object has no
attribute 'decode', change to only decode when readdata is valid.
[YOCTO #11875]
Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wes Lindauer [Wed, 14 Nov 2018 18:40:56 +0000 (13:40 -0500)]
module.bbclass: Add INSTALL_FW_PATH for out-of-tree modules
This same variable was added to the make line in kernel.bbclass in 0decf1cc1c35dd70f3b822e3b4291a810a319ba0. With the addition of the
usrmerge feature, out-of-tree modules could use this same variable.
Signed-off-by: Wes Lindauer <wesley.lindauer@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changqing Li [Thu, 15 Nov 2018 08:16:55 +0000 (16:16 +0800)]
checklayer: generate locked-sigs.inc under builddir
yocto-check-layer will find locked-sigs.inc under builddir,
but locked-sigs.inc is generated under current bitbake working
dir. if run yocto-check-layer outside builddir, we will met error
like "No such file or directory: *locked-sigs.inc". change to
run bitbake -S under builddir to fix this problem.
[YOCTO #12973]
Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kai Kang [Wed, 14 Nov 2018 05:46:32 +0000 (00:46 -0500)]
gettext: fix CVE-2018-18751
Backport patch to fix CVE-2018-18751 for gettext. Because po-gram-gen.y
has been modified by fix-CVE-2018-18751.patch, it requires yacc which
provided by bison-native to re-create po-gram-gen.c. Please remove
bison-native from DEPENDS* when next upgrade.
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mingli Yu [Mon, 12 Nov 2018 09:27:42 +0000 (01:27 -0800)]
x264: Disable asm on x86
The previous commit as below only fixes the
textrel issue with musl on x86, update it also to
fix the issue such as with glibc on x86. 74ea4f280c1 x264: Disable asm on musl/x86
[YOCTO #11770]
Signed-off-by: Mingli Yu <mingli.yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hongxu Jia [Tue, 13 Nov 2018 03:14:26 +0000 (11:14 +0800)]
rpcbind: 0.2.4 -> 1.2.5
- Drop backport fixes
0001-rpcbind-pair-all-svc_getargs-calls-with-svc_freeargs.patch
pmapproc_dump-Fixed-typo-in-memory-leak-patch.patch
rpcbproc_callit_com-Stop-freeing-a-static-pointer.patch
- Do not manually move binaries from bindir to sbindir,
the upstream already moved rpcbind from bin_PROGRAMS
to sbin_PROGRAMS in Makefile.am
https://git.linux-nfs.org/?p=steved/rpcbind.git;a=commitdiff;h=9afccfcd5ab350d6bc72622f3d1ccfb9e54652b0
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 13 Nov 2018 21:16:54 +0000 (21:16 +0000)]
oeqa/loader: Fix deprecation warning
Clean up the warning:
meta/lib/oeqa/core/loader.py:27: DeprecationWarning: inspect.getargspec() is deprecated, use inspect.signature() or inspect.getfullargspec()
_failed_test_args = inspect.getargspec(unittest.loader._make_failed_test).args
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 13 Nov 2018 21:11:50 +0000 (21:11 +0000)]
oeqa/runner: Sort the test result output by result class
We want to see failures/errors listed last since this is the most easily
visible part of the log on consoles or autobuilder output and makes
human processing easier rather than having to scroll up and scan for
a single failure.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 13 Nov 2018 13:53:01 +0000 (13:53 +0000)]
license_image: Fix rootfs file ownership issues with COPY_LIC_DIRS
We need to set ownership of the license files after copying into the rootfs.
We also need to ensure we don't overwrite the rootfs files outside rootfs
generation, hence only write there when the new rootfs function parameter
is True.
[YOCTO #12961]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Niko Mauno [Mon, 12 Nov 2018 17:30:08 +0000 (19:30 +0200)]
opkg-utils: Fix update-alternatives link relocation
Recently Debian-style support for link relocation was added to
'update-alternatives' script, but it fails under circumstances where
host rootfs root directory differs from target rootfs root directory
and two alternative packages provide a symbolic link with source
located in different directories.
An example of the case is busybox provided /bin/rev (symlinking to
/bin/busybox.nosuid) and util-linux provided /usr/bin/rev (symlinking
to /usr/bin/rev.util-linux) in which case following failure occurs
during image recipe's do_rootfs() task:
ERROR: core-image-minimal-1.0-r0 do_rootfs: Postinstall scriptlets of ['util-linux'] have failed. If the intention is to defer them to first boot,
then please place them into pkg_postinst_ontarget_${PN} ().
Deferring to first boot via 'exit 1' is no longer supported.
Details of the failure are in .../tmp/work/qemux86-poky-linux/core-image-minimal/1.0-r0/temp/log.do_rootfs.
ERROR: core-image-minimal-1.0-r0 do_rootfs: Function failed: do_rootfs
Looking in log.do_rootfs file, following relevant lines can be observed:
update-alternatives: renaming rev link from /bin/rev to /usr/bin/rev
mv: cannot stat '/bin/rev': No such file or directory
Mitigate issue by applying patch which adds target root filesystem root
directory path prefix to failing 'mv' calls relevant variable references
Signed-off-by: Niko Mauno <niko.mauno@iki.fi> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 8 Nov 2018 19:57:49 +0000 (19:57 +0000)]
testimage: Simplfy DEFAULT_TEST_SUITES logic
Now that the tests have correct markup to automatically determine which images
they can run against, clean up the default test suites logic to be simpler
and not image specific.
Some cleanup of the compiler tests still needs to be completed but this
is a good first step.
The only downside to this is more noise during testing as we now see
many skipped messages for simple images like core-image-minimal.
The auto type is being removed since it currently breaks badly due to the
socat mandatory inclusion from the meta-selftest layer which is a problem
which needs to be addressed seperately.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hongxu Jia [Fri, 9 Nov 2018 09:12:22 +0000 (17:12 +0800)]
libjitterentropy: add 2.1.2
>From the following kernel commit we know: Fedora has integrated the jitter
entropy daemon to work around slow boot problems, especially on VM's that
don't support virtio-rng
Hongxu Jia [Tue, 30 Oct 2018 02:22:49 +0000 (22:22 -0400)]
machine/qemu*: fix kernel finish crng init more and more slowly
Just adding `-device virtio-rng-pci' to the QEMU invocation will
add the device with a default host backend. As of QEMU 1.3+,
the default backend is to use the host's /dev/random as a
source of entropy. [1]
When the entropy pool is empty, reads from /dev/random will
block until additional environmental noise is gathered. [2]
For Yocto, if call runqemu frequently, it will consume lots
of host's /dev/random, and kernel finish crng init in guest get
more and more slowly.
Modify entropy source to /dev/urandom device on the host which
returns random bytes using a pseudorandom number generator seeded
from the entropy pool. Reads from this device do not block and
kernel finish crng init in guest will not delay.
Of course, the side effect is obviously, we lost the quality of
randomness, but the modification is only on runqemu script
rather than real embedded device, and it benefits oeqa efficiency
in which many cases call runqemu especially multiple oeqa builds
on one host.
There is a class pairs TestProtocolClient and TestProtocolServer
provided by python3-subunit. The TestProtocolClient generates a
subunit stream of TestResult from a test run, and TestProtocolServer
parses the stream of subunit TestResult.
The class ProtocolTestCase is a unittest.TestCase adapter and it
uses TestProtocolServer to parse the stream of subunit TestResult.
In Yocto testsdk, it forks multiple processes to execute testcases
and use TestProtocolClient to generate TestResult stream; and then
it creates multiple threads to use ProtocolTestCase to parse stream
of subunit TestResult through pipe; finally it passes multiple
ProtocolTestCase as TestCase instance to main process and output
status result.
The problem point is TestProtocolServer parses `skip:' directive
after reading a `test:' directive. Without `test:' directive,
`skip:' directive will be ignored. All above requires SkipTest should
be raised inside a test method rather than setUpClass method.
Throwing SkipTest inside setUp works correctly
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mingli Yu [Thu, 8 Nov 2018 06:08:16 +0000 (14:08 +0800)]
libsm: extend to nativesdk
After enable tk via PACKAGECONFIG for python3,
there comes below error:
Missing or unbuildable dependency chain was: ['buildtools-tarball', 'nativesdk-python3-testtools', 'nativesdk-python3-pbr', 'nativesdk-python3', 'nativesdk-tk', 'nativesdk-libxt', 'nativesdk-libsm']
Extend libsm to nativesdk to fix this issue.
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mingli Yu [Thu, 8 Nov 2018 06:08:17 +0000 (14:08 +0800)]
libice: extend to nativesdk
After enable tk via PACKAGECONFIG for python3,
there comes below error:
Missing or unbuildable dependency chain was: ['buildtools-tarball', 'nativesdk-python3-git', 'nativesdk-python3-gitdb', 'nativesdk-python3-async', 'nativesdk-python3', 'nativesdk-tk', 'nativesdk-libxt', 'nativesdk-libsm', 'nativesdk-libice']
Extend libice to nativesdk to fix this issue.
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mingli Yu [Thu, 8 Nov 2018 06:08:15 +0000 (14:08 +0800)]
fontconfig: extend to nativesdk
After enable tk via PACKAGECONFIG for python3,
there comes below error:
Missing or unbuildable dependency chain was: ['nativesdk-packagegroup-sdk-host', 'nativesdk-opkg', 'nativesdk-libsolv', 'nativesdk-rpm', 'nativesdk-python3', 'nativesdk-tk', 'nativesdk-xft', 'nativesdk-fontconfig']
Extend fontconfig to nativesdk to fix this issue.
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mingli Yu [Thu, 8 Nov 2018 06:08:14 +0000 (14:08 +0800)]
libxft: extend to nativesdk
After enable tk via PACKAGECONFIG for python3,
there comes below error:
Missing or unbuildable dependency chain was: ['buildtools-tarball', 'nativesdk-python3-testtools', 'nativesdk-python3-pbr', 'nativesdk-python3', 'nativesdk-tk', 'nativesdk-xft']
Extend libxft to nativesdk to fix this issue as
PROVIDES = "xft" in libxft recipe.
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mingli Yu [Thu, 8 Nov 2018 06:08:13 +0000 (14:08 +0800)]
libxt: extend to nativesdk
After enable tk via PACKAGECONFIG for python3,
there comes below error:
Missing or unbuildable dependency chain was: ['buildtools-tarball', 'nativesdk-python3-pytz', 'nativesdk-python3', 'nativesdk-tk', 'nativesdk-libxt']
Extend libxt to nativesdk to fix this issue.
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 8 Nov 2018 14:24:00 +0000 (14:24 +0000)]
distcc: Handle upstream branch deletion for old releases
distcc upstream dropped the 3.2 branch which we reference in older project releases
the revisions are there, just the branch is not. In order to be able to continue
to build those old releases, adjust any mirror tarball to contain the missing branch.
We have updated the newer point releases but the previous tags were failing to build.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Nathan Rossi [Wed, 7 Nov 2018 08:51:56 +0000 (08:51 +0000)]
base.bbclass: Display name of licenses which caused SkipRecipe
Display the name of the restricted licenses which caused the recipe to
be skipped. This makes it easy to determine which license or licenses
are missing and need to be checked and whitelisted.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
openssl-1.1.1: remove build path from version info
The openssl build system generates buildinf.h containing the full
compiler command line used to compile objects. This breaks
reproducibility, as the compile command is baked into libcrypto, where
it is used when running `openssl version -f`.
Add stripped build variables for the compiler and cflags lines, and use
those when generating buildinfo.h.
This is based on a similar patch for older openssl versions:
https://patchwork.openembedded.org/patch/147229/
Signed-off-by: Martin Hundebøll <martin@geanix.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jens Rehsack [Thu, 8 Nov 2018 15:32:42 +0000 (16:32 +0100)]
cpan.bbclass: avoid newer MakeMaker run perl.real
In newer versions of ExtUtils::MakeMaker, the location of the perl
binary to run is determined differently which results in finding
${bindir}/perl.real instead of ${bindir}/perl
Signed-off-by: Jens Rehsack <sno@netbsd.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
busybox: make busybox.links.{suid, nosuid} reproducible
The busybox.link.* files are generated from autoconf.h and applets.h,
which are both auto-generated by the build system. The contents of the
two files might be in different order, and so the link files are not
reproducble as is.
Fix this by sorting the lists using `sort`.
Signed-off-by: Martin Hundebøll <martin@geanix.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yeoh Ee Peng [Thu, 8 Nov 2018 09:41:54 +0000 (17:41 +0800)]
oeqa/runtime: Add tests for gstreamer CLI
We should not be finding GStreamer issues right around
release time but that's what we seem to do.
Port gstreamer tests from Intel Ref Kit.
https://github.com/intel/intel-iot-refkit/blob/master/meta-iotqa/
lib/oeqa/runtime/multimedia/gstreamer/gstreamer_cli.py
Add tests for gstreamer commandline tools (gst-inspect-1.0
& gst-launch-1.0).
[YOCTO #11418]
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
scripts/autobuilder-worker-prereq-tests: Shore up qemu testing
Check that yocto-autobuilder-helper has been cloned to the correct location.
Check that vnc is running using the same script the autobuilder does.
Set the DISPLAY enviroment variable to :1 the same way we do when building
normally.
Make the VM's serial console available so we can log in and power off allowing
the tests to continue.
Signed-off-by: Michael Halstead <mhalstead@linuxfoundation.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
scripts/runqemu: Replace subprocess.run() for compatibilty
subprocess.run() was introduced in Python 3.5. We currently support down to
Python 3.4 so I've replaced it with subprocess.check_call() which is available
in that version.
Signed-off-by: Michael Halstead <mhalstead@linuxfoundation.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 8 Nov 2018 20:58:38 +0000 (12:58 -0800)]
scripts/runqemu: Add serialstdio mode
Its currently not possible to have a console available whilst using qemu in graphics
mode. This is causing some issues for testing autobuilder bringup so all a "serialstdio"
mode to runqemu to accomodate this.
The existing serialstdio internal variable is renamed to allow the new user visible option.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous code looks strange because of historical reason, simply return
base_get_metadata_git_revision/branch() is enough, the later functions has
handled everything like '<unknown>' and strip().
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
shadow: improve reproducibility by hard-coding shell path
The shadow configure script tries really hard to detect the running
shell to make sure it doesn't do unsupported calls.
On my system the shell is detected as /bin/sh, while a build in an
ubuntu docker it resolves to /bin/bash. And since the shell path is
baked into the target binaries through config.h, the build becomes
inreproducible.
Fix reproducibility by hard-coding the shell to be /bin/sh
Signed-off-by: Martin Hundebøll <martin@geanix.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mauno Niko [Mon, 12 Nov 2018 11:32:14 +0000 (11:32 +0000)]
strace: Bump to version 4.25
V4L2_CID_USER_IMX_BASE value differs in v4.14 and v4.19 LTS kernels
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/include/uapi/linux/v4l2-controls.h?h=v4.14.79#n191
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/include/uapi/linux/v4l2-controls.h?h=v4.19.1#n191
Building strace v4.24 against 4.19 kernel headers results in following
build failure
| arm-vaisala-linux-gnueabi-ranlib libstrace.a
| In file included from ../strace-4.24/static_assert.h:31,
| from ../strace-4.24/xlat/v4l2_pix_fmts.h:4,
| from ../strace-4.24/v4l2.c:78:
| ../strace-4.24/xlat/v4l2_control_id_bases.h:36:1: error: static assertion failed: "V4L2_CID_USER_IMX_BASE != (V4L2_CID_BASE + 0x1090)"
This Linux kernel ABI breakage that occurred wrt V4L2_CID_USER_IMX_BASE
has been observed and addressed in strace upstream commit
https://github.com/strace/strace/commit/b89a69dec27cf638df0e17db80ed937c3e1abf77
Bump strace to version 4.25 which also addresses ABI breakage so that
strace once again builds against both v4.14 and v4.19 LTS kernel headers
Signed-off-by: Niko Mauno <niko.mauno@vaisala.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop newly added option --disable-lang-qt-test which is merged to --disable-gpg-test by
upstream commit [26820ba qt: Respect --disable-gpg-test for tests]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable sna by default and remove upstreamed patches.
Also include a patch from fedora to fix compile issues when using
qemux86 which doesn't enable sse2 leading to gcc refusing to
inline vertex_emit_2s in emit_vertex because they are defined as:
static __attribute__((always_inline)) void
vertex_emit_2s(struct sna *sna, int16_t x, int16_t y)
| In file included from ../../../git/src/sna/gen4_vertex.c:34:
| ../../../git/src/sna/gen4_vertex.c: In function 'emit_vertex':
| ../../../git/src/sna/sna_render_inline.h:40:26: error: inlining failed in call to always_inline 'vertex_emit_2s': target specific option mismatch
| static force_inline void vertex_emit_2s(struct sna *sna, int16_t x, int16_t y)
| ^~~~~~~~~~~~~~
| ../../../git/src/sna/gen4_vertex.c:308:25: note: called from here
| #define OUT_VERTEX(x,y) vertex_emit_2s(sna, x,y) /* XXX assert(!too_large(x, y)); */
| ^~~~~~~~~~~~~~~~~~~~~~~~
| ../../../git/src/sna/gen4_vertex.c:360:2: note: in expansion of macro 'OUT_VERTEX'
| OUT_VERTEX(dstX, dstY);
| ^~~~~~~~~~
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Tue, 30 Oct 2018 19:04:26 +0000 (15:04 -0400)]
kernel: use olddefconfig as the primary target for KERNEL_CONFIG_COMMAND
As was warned by commit 312ee68752fa [kconfig: announce removal of
oldnoconfig if used], oldnoconfig has been removed from the 4.20 kernel.
So we switch our default mode to olddefconfig.
commit fb16d8912 [kconfig: replace 'oldnoconfig' with 'olddefconfig',
and keep the old name as an alias] introduced olddefconfig in the 3.10
kernel, we shuffle oldnoconfig to the fallback target.
The fallback mode allows kernels between 3.10 and the currently listed
oldest kernel of 3.2 to continue to configure.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Armin Kuster [Sat, 20 Oct 2018 14:55:49 +0000 (15:55 +0100)]
gnutls: update to 3.6.4
Notable change:
libgnutls: Added the final (RFC8446) version numbering of the TLS1.3 protocol.
see: https://lists.gnupg.org/pipermail/gnutls-help/2018-September/004457.html
Signed-off-by: Armin Kuster <akuster808@gmail.com>
--
[v2]
Fix typo in version in subject
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having image-buildinfo enabled causes containerimage.ContainerImageTests.test_expected_files
to fail due to the presence of an unexpected file:
['./',
'./etc/',
- './etc/build',
'./etc/default/',
'./etc/default/postinst',
Tweak the class to allow it to be disabled and disable it from the test just in
case it was enabled.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Randy MacLeod [Wed, 7 Nov 2018 17:59:22 +0000 (12:59 -0500)]
valgrind: drop mips n32 support
valgrind for qemumips64 multilib builds fails to configure
for libn32 with the error:
configure:6190: checking for 32 bit build support
...
fatal error: bits/long-double-32.h: No such file or directory
It seems that the toolchain is producing:
tmp-glibc/sysroots-components/mips64-n32/libn32-glibc/usr/include/bits/long-double-n32.h
Until the toolchain problem is resolved, skip valgrind for libn32.
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
