Bruce Ashfield [Fri, 23 Oct 2015 20:18:32 +0000 (16:18 -0400)]
linux-yocto: skip kernel meta data branches when finding machine branch
Before the fetcher validated the specified SRCREV was reachable on a
specified branch, linux-yocto style kernel's were comparing the value
of KBRANCH and branch on the SRC_URI and then allowing a SRC_URI
specified branch to override KBRANCH.
With the introduction of kernel meta data on the SRC_URI, this routine
is incorrectly picking up a kernel-cache repository and then attempting
to apply that branch information to the kernel repository.
The rationalization of the branch specification is largely no longer
required, and will may be removed in the future. But for now, to keep
changes minimal, we can simply not return branch information that comes
from kernel meta data by checking the 'type' parameter and skipping
if it is of type 'kmeta'.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 23 Oct 2015 20:18:29 +0000 (16:18 -0400)]
linux-yocto/4.1: drm/i915: Fix the VBT child device parsing for BSW
Updating the 4.1 SRCREVs to integrate the following fix:
[
drm/i915: Fix the VBT child device parsing for BSW
Recent BSW VBT has a VBT child device size 37 bytes instead of the 33
bytes our code assumes. This means we fail to parse the VBT and thus
fail to detect eDP ports properly and just register them as DP ports
instead.
Fix it up by using the reported child device size from the VBT instead
of assuming it matches out struct defintions.
The latest spec I have shows that the child device size should be 36
bytes for rev >= 195, however on my BSW the size is actually 37 bytes.
And our current struct definition is 33 bytes.
Feels like the entire VBT parses would need to be rewritten to handle
changes in the layout better, but for now I've decided to do just the
bare minimum to get my eDP port back.
Cc: Vijay Purushothaman <vijay.a.purushothaman@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 90e4f1592bb6e82f6690f0e05a8aadcf04d7bce7) Signed-off-by: abdul arif abdul muttalib
<abdul.arif.b.abdul.muttalib@intel.com> Signed-off-by: Tan Jui Nee <jui.nee.tan@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
archiver.bbclass: Fixes and improves archiver class for kernel and gcc packages
gcc packages use a shared source directory, this causes an issue since the archiver will
try to patch the same source several times (one for each gcc package), producing an error,
the archiver class used stamp-base to check this, nonetheless our gcc packages no longer
use stamp-base, they use gcc-shared instead, which is what broke this functionality.
This patch adds a check to see whether or not the source should be patched,
avoiding patching the source when it shouldn't.
Also, we dont need to create multiple identical tarballs for all gcc packages,
this patch fixes this and creates a single source tarball for gcc.
When requesting patched sources, a race condition is created for linux-yocto tasks,
unpack_and_patch is executed along with kernel_configme, which most of the time
causes errors during configure, since kernel_configme task is specific to the kernel,
simply modifying the tasks order by creating a dependency to kernel_configme was impossible,
causing errors on all other packages that didnt use kernel_configme, this is fixed by
creating a special case for the kernel, adding tasks with correct dependencies,
avoiding the race condition and behaving the way it should for all other packages as well.
[YOCTO #8378]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Fri, 16 Oct 2015 10:44:49 +0000 (11:44 +0100)]
oeqa/selftest: clean up selftest.inc in teardown
Test cases may want to do call bitbake in setUpClass() but at that point the
previous selftest.inc is still present which could change the build
configuration and result in any built artifacts being removed in the next
bitbake invocation as part of the sysroot clean up.
Resolve this by cleaning selftest.inc in the tearDown, the clean in setUp should
be considered a safety net.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Thu, 15 Oct 2015 15:53:47 +0000 (16:53 +0100)]
oeqa/selftest/wic: fix cleaning
In some situations the native tools built in setUpClass() are wiped from the
sysroot by the time the tests are executed, likely due to the cleanup performed
in the base setUp() method.
Avoid this by doing all of the preparatory building in setUpLocal.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Mon, 12 Oct 2015 11:55:04 +0000 (12:55 +0100)]
oeqa/selftest: verify that devtool can use plugins in other layers
In selftest we want to exercise devtool's ability to use plugins from other
layers, so add a basic command to reverse a string to meta-selftest and a test
in oe-selftest to call it.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Tue, 20 Oct 2015 12:49:04 +0000 (13:49 +0100)]
oeqa/selftest/bbtests: clean up local DL_DIR/SSTATE_DIR safely
Now that the selftests clean selftest.inc in the tearDown using bitbake in a
function passed to addCleanup (which happens after teardown) will use the
default configuration and not the customised one.
As the intention was to clean away the temporary DL_DIR and SSTATE_DIR, simple
use track_for_cleanup to delete the entire directory instead.
Signed-off-by: Ross Burton <ross.burton@intel.com>
oeqa/utils/ftools: Ignore the exception if file does not exist
There may be cases where the configuration file (path) does not exist,
thus the remove_from_file should catch this exception. In case the exception
is not the latter (errno.ENOENT), then re-raise it.
[YOCTO #8540]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
oeqa/selftest/manifest.py: Test support for manifests
adding support for tests to verify that manifest contents
contain entries that exist in an specified pkgdata dir
tests added:
- manifest.VerifyManifest.test_image_manifest_entries
- manifest.VerifyManifest.test_SDK_manifest_entries
test support written for future tests:
-adding a setUpClass that supports other manifest tests
-a get dir from bb var function that verifies if the dir exists
-a ManifestEntry class defined with missing items list
-check for the paths and fail gracefully if not there
-debug prints for failure analysis
[YOCTO#8028]
Signed-off-by: Benjamin Esquivel <benjamin.esquivel@linux.intel.com> Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
useradd_base.bbclass: Do not warn without a reason
In c0da4270c76375a7a8cbcc09319fe4570ebbc5bd two bbwarn were changed to
bbnote for the case where an added user or group already exists. The
same should have been done for groupmems, groupdel and userdel as well
since the warnings that are currently generated are superflouous.
The two remaining similar bbwarn for groupmod and usermod are left as
is since there they actually make sense.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Tue, 20 Oct 2015 21:19:08 +0000 (22:19 +0100)]
qemu: disable Valgrind
Qemu has an automatic dependency on valgrind which cannot be disabled, which
causes non-deterministic builds and build failures. As Valgrind wasn't enabled
previously make this deterministic by forcibly disabling it.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Matt Madison [Tue, 20 Oct 2015 14:28:05 +0000 (07:28 -0700)]
i2c-tools: fix inverted RDEPENDS
The runtime dependency between i2c-tools and i2c-tools-misc was
backwards when the packages were split. With this change,
including i2c-tools in an image no longer drags in perl.
Signed-off-by: Matt Madison <matt@madison.systems> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Mon, 19 Oct 2015 21:42:47 +0000 (22:42 +0100)]
rpm: remove spurious build dependencies
make, patch and binutils are assumed to exist on the host, so there's no need to
have them in DEPENDS and can result in the building of make-native for no good
reason.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Mark Hatle [Mon, 19 Oct 2015 15:29:49 +0000 (10:29 -0500)]
gcc-5.2: Fix various _FOR_BUILD and related variables
When doing a FOR_BUILD thing, you have to override CFLAGS with
CFLAGS_FOR_BUILD. And if you use C++, you also have to override
CXXFLAGS with CXXFLAGS_FOR_BUILD.
Without this, when building for mingw, you end up trying to use
the mingw headers for a host build.
The same goes for other variables as well, such as CPPFLAGS,
CPP, and GMPINC.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
populate SDK: prepare calling of bb.utils for exceptions
bb.utils.remove, bb.utils.movefile and bb.utils.mkdirhier can throw
exceptions that need handling and proper error messages
more work is required for these methods to handle properly the
exceptions that can be raised within the various OS calls they make
but this is a start to at least not hide the errors in the requested
operations
[YOCTO#8213]
Signed-off-by: Benjamin Esquivel <benjamin.esquivel@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Wed, 14 Oct 2015 18:19:23 +0000 (19:19 +0100)]
devtool: handle virtual providers
For modify / extract / upgrade, if the specified "recipe" is not
actually a recipe but a virtual target such as virtual/kernel, map it
correctly to the actual recipe and make sure we use that name within the
workspace. Thanks to Chris Larson for reminding me this was still broken
and for a hint on how to fix it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Mon, 19 Oct 2015 16:33:11 +0000 (17:33 +0100)]
classes/populate_sdk_ext: detect and warn if running in OE environment
If you run the extensible SDK environment setup script in a shell
session where oe-init-build-env has been run already, and attempt to use
the two together, strange things happen - you may not even be running
devtool from the extensible SDK, but the OE tree. This isn't a supported
use case anyway, so show a warning recommending starting a new shell
session.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 19 Oct 2015 16:33:09 +0000 (17:33 +0100)]
classes/populate_sdk_ext: prevent image construction from executing on install
In order to prepare the build system within the extensible SDK, we
actually go ahead and build the targets specified by SDK_TARGETS (by
default the image the SDK was built for). Assuming that's an image, we
don't actually need to build the image itself - we just need to have
everything done up to the point before building the image, so that we
have everything needed in the sysroot.
In order to do this, create temporary bbappends for each of the targets
in the workspace layer that stub out do_rootfs and related tasks if they
exist. This is a little bit of a hack but is the least intrusive fix at
this point. To make things a bit tidier, I have split out the
preparation commands into a separate script so we can run that in the
appropriate environment rather than all the commands separately.
Fixes [YOCTO #7590].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mariano Lopez [Thu, 15 Oct 2015 06:29:38 +0000 (06:29 +0000)]
oeqa/runtime: Fix setUp and tearDown methods
Currently some of the runtime test overwrites
the setUp and tearDown methods provided by
oeRuntimeTest, this will avoid some checks
required when running the test suit.
This patch changes the setUp and tearDown methods
for their local counterparts, so when these
tests are called, it will run the parent setUp
and tearDown and also the local ones.
[YOCTO #8465]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Mariano Lopez [Thu, 15 Oct 2015 06:29:37 +0000 (06:29 +0000)]
oetest: Add tearDownLocal class
In the current state there are some runtime test that
don't run the tearDown method fromm oeRuntimeTest class
because the tearDown class is overwritten in the child
class.
This change adds tearDownLocal method in oeRuntimeTest
class that will run after tearDown. This method can be
overwritten in the child classes to implement specific
test functionality.
[YOCTO #8465]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Fri, 16 Oct 2015 10:34:39 +0000 (11:34 +0100)]
scripts/gen-lockedsig-cache: fix race with temp file creation
As part of populating the sstate-cache with an artifact (.tgz file) we
create a temp file and then atomically move it to the final name. Due to
the glob used in this script such temp files were being matched, and
between the time they were matched and the time the script started
copying files, the temp file may have vanished.
This fixes random "No such file or directory" failures building the
extensible SDK on build setups where the sstate-cache directory is shared
amongst multiple build machines.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Maxin B. John [Thu, 15 Oct 2015 07:00:40 +0000 (10:00 +0300)]
toolchain-shar-extract.sh: provide proper path for env_setup_script
The toolchain install script suggest the user to source env_setup_script
from wrong path now. eg:
" Each time you wish to use the SDK in a new shell session, you need to
source the environment setup script e.g.
$ . /opt/poky/2.0//opt/poky/2.0/environment-setup-armv5e-poky-linux-gnueabi
"
fix it.
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Joe MacDonald [Wed, 14 Oct 2015 19:27:53 +0000 (15:27 -0400)]
classes/base: provide hints on PACKAGECONFIG error
Commit 771f89498c introduces an error message that is very rarely hit and
when it is, it is usually easy to trace the root cause very quickly. The
information provided in the error message isn't enough to lead you back to
the actual failure, however, so expand upon it a bit, pinpointing the
specific package and flag that fails.
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Tue, 13 Oct 2015 14:52:20 +0000 (15:52 +0100)]
metadata_scm: rewrite git hash logic
The code to get the git and branch hash for the current commit in a specific
repository was quite complex and prone to breakage, replace it with subprocess
and git rev-parse.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Robert Yang [Sat, 10 Oct 2015 07:04:29 +0000 (00:04 -0700)]
coreutils: fix for native and nativesdk
The do_install_append is used for moving/renaming for ALTERNATIVE, but
it breaks native and nativesdk, for example there is no ln, but
ln.coreutils, that makes coreutils-native or nativesdk-coreutils doesn't
work. This patch fixes the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Mon, 12 Oct 2015 13:49:11 +0000 (14:49 +0100)]
tzdata: reinstate changes reverted in 2014c upgrade
OE-Core commit 57af3fb9662106f0a65a1b4edf83e2398be0a8f1 upgraded tzdata
but also reverted a couple of changes to SUMMARY and LIC_FILES_CHKSUM.
Reinstate these (with an update to the README md5 value since that has
changed slightly, without any change to the licensing statements
within).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Mon, 12 Oct 2015 13:49:10 +0000 (14:49 +0100)]
build-compare: drop PATCHTOOL setting
We don't need PATCHTOOL to be set to git in this recipe, and setting it
that way requires that the running user has git user & email configured,
which on a build server it might well not be.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Mon, 12 Oct 2015 13:49:09 +0000 (14:49 +0100)]
common-licenses: use correct GFDL-1.1 license text
It seems that the GFDL 1.1 license file that was originally committed
was actually the 1.2 version. Replace it with the 1.1 version fetched
from http://www.gnu.org/licenses/old-licenses/fdl-1.1.txt.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Aníbal Limón [Fri, 9 Oct 2015 22:21:44 +0000 (17:21 -0500)]
bash: Disable custom memory allocator
Bash is failing trying to allocate memory [1] using the custom
memory allocator if we disable it the issue is fixed.
The major distributions also disabled by default [2], so we
don't have a good reason to use it.
The underlying issue is due to bash’s malloc using brk() calls
to allocate memory, which fail when address randomization is
enabled in kernel. sbrk() based custom allocators are obsolete.
There may be some performance impact of this however correctness
is more important.
Martin Jansa [Fri, 9 Oct 2015 15:11:29 +0000 (17:11 +0200)]
webkitgtk, gcr, libsecret: force ARM mode
* gcr, libsecret are new since switch to gcc 5.2
* webkitgtk is old but it was removed while migrating from
webkit-gtk to webkitgtl (like REQUIRED_DISTRO_FEATURES were) :/
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Jussi Kukkonen [Fri, 9 Oct 2015 12:20:55 +0000 (15:20 +0300)]
gtk+3: gtk3-demo needs libgl
The demo app uses OpenGL (within a GtkGLArea): it needs a runtime
dependency on a GL library. Current GTK+ can only handle
full GL (libGL.so.1) so RDEPEND on libgl.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
lib/oe/distro_check: Remove '_proxy' on dict values used by urllib.open
There are two ways to pass the proxies values into urllib.open: exporting
the environment variables *_proxy and passing as dictionary into the
urllib.open call. The latter is currenty used and values should not have
the '_proxy' string, so removing it. Also, ignore uppercase proxies, these
are not taken into account by the library.
Tested on a network with proxy, adding 'inherit +="distrodata"' on local.conf
with the following commands
for distrotask in distrodataall distro_checkall checklicenseall; do
bitbake universe -c $distrotask
done
[YOCTO #7567]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Kai Kang [Wed, 30 Sep 2015 07:47:17 +0000 (15:47 +0800)]
iptables: only check libnetfilter-conntrack when libnfnetlink is enabled
Package libnetfilter-conntrack depends on package libnfnetlink. iptables
checks package libnetfilter-conntrack whatever its package config
libnfnetlink is enabled or not. When libnfnetlink is disabled but
package libnetfilter-conntrack exists, it fails randomly with:
| In file included from .../iptables/1.4.21-r0/iptables-1.4.21/extensions/libxt_connlabel.c:8:0:
| .../tmp/sysroots/qemumips/usr/include/libnetfilter_conntrack/libnetfilter_conntrack.h:14:42: fatal error: libnfnetlink/linux_nfnetlink.h: No such file or directory
| compilation terminated.
| GNUmakefile:96: recipe for target 'libxt_connlabel.oo' failed
Only check libnetfilter-conntrack when libnfnetlink is enabled to fix it.
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
This file wasn't named as a patch, nor told to apply explicity, so it was just
unpacked to the work directory and not applied. Rename the file so the patch is
applied correctly.
(thanks to Petter Mabäcker <petter@technux.se> for spotting this)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Tue, 6 Oct 2015 13:03:13 +0000 (14:03 +0100)]
rpm: fix return without value in patch
The error patch in rpm-check-rootpath-reasonableness.patch did a bare return
from a function that should be returning an int. As this is the error path,
return -1 instead.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Mariano Lopez [Thu, 1 Oct 2015 10:40:47 +0000 (10:40 +0000)]
oeqa/utils/qemurunner: Add support for Unicode from qemu
The current state of qemurunner will drop the Unicode
characters received from qemu, this is because error
report web had problems with Unicode characters; now
that the server support Unicode, it is possible to
log all the output from qemu. So far the only Unicode
character seen is the copyright symbol.
This patch allows to get Unicode characters from the qemu
target and save the log in an UTF-8 file for latter use.
[YOCTO #8225]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mariano Lopez [Thu, 1 Oct 2015 10:40:46 +0000 (10:40 +0000)]
report-error.bbclass: Support Unicode reports
Currently error-report doesn't manage Unicode because
the files are opened with the default codec.
This patch changes the codec of the files to UTF-8,
this way the reports will include Unicode characters.
This is useful for the qemu output when doing the
testimage task.
[YOCTO #8225]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andreas Müller [Fri, 2 Oct 2015 20:27:21 +0000 (22:27 +0200)]
udev: add PROVIDES = "libgudev"
With the last update of systemd libgudev was splitted out of systemd. To make
packages depending on libgudev happy, a recipe building libgudev was created in
meta-oe and the dependencies were modified from udev to libgudev.
This works fine for distros using systemd as init system, but distros not using
build udev which provides libgudev.
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Fri, 2 Oct 2015 15:25:21 +0000 (10:25 -0500)]
lib/oe/image.py: Add image generation for companion debug filesystem
The companion debug filesystem, enabled with IMAGE_GEN_DEBUGFS, was
creating the companion filesystem but was missing the code to actually
package it into a usable filesystem.
The code (and associated documentation) will allow the debugfs to generate a
companion tarball or other image.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andre McCurdy [Fri, 2 Oct 2015 00:22:01 +0000 (17:22 -0700)]
package_manager.py: sort output of OpkgPkgsList().list
Without explicit sorting, the output generated by OpkgPkgsList().list
follows the order of packages in /var/lib/opkg/status, which appears
to be "random". Add sorting to make OpkgPkgsList().list behaviour
consistent with that of RpmPkgsList().list.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Armin Kuster [Fri, 2 Oct 2015 14:26:49 +0000 (07:26 -0700)]
tzdata: update to 2015g
Resend: typo in version in subject.
Changes affecting future time stamps
Turkey's 2015 fall-back transition is scheduled for Nov. 8, not Oct. 25.
(Thanks to Fatih.)
Norfolk moves from +1130 to +1100 on 2015-10-04 at 02:00 local time.
(Thanks to Alexander Krivenyshev.)
Fiji's 2016 fall-back transition is scheduled for January 17, not 24.
(Thanks to Ken Rylander.)
Fort Nelson, British Columbia will not fall back on 2015-11-01. It has
effectively been on MST (-0700) since it advanced its clocks on 2015-03-08.
New zone America/Fort_Nelson. (Thanks to Matt Johnson.)
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Armin Kuster [Fri, 2 Oct 2015 14:24:52 +0000 (07:24 -0700)]
tzcode: update to 2015g
Changes affecting code
localtime no longer mishandles America/Anchorage after 2037.
(Thanks to Bradley White for reporting the bug.)
On hosts with signed 32-bit time_t, localtime no longer mishandles
Pacific/Fiji after 2038-01-16 14:00 UTC.
The localtime module allows the variables 'timezone', 'daylight',
and 'altzone' to be in common storage shared with other modules,
and declares them in case the system <time.h> does not.
(Problems reported by Kees Dekker.)
On platforms with tm_zone, strftime.c now assumes it is not NULL.
This simplifies the code and is consistent with zdump.c.
(Problem reported by Christos Zoulas.)
Changes affecting documentation
The tzfile man page now documents that transition times denote the
starts (not the ends) of the corresponding time periods.
(Ambiguity reported by Bill Seymour.)
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Fri, 2 Oct 2015 13:05:08 +0000 (14:05 +0100)]
recipetool: create: fix change in path structure if --extract-to path exists
If the directory specified by --extract-to exists, because we were using
shutil.move() to move the temporary extracted directory to the specified
path, a subdirectory was being created under that directory instead of
moving the contents, which was a different result than if the directory
didn't previously exist. We could try to always move the contents but
that's complicated when any symlinks are involved; the simplest thing is
just to remove the directory (which should be empty anyway) before
moving the temporary directory across in its place.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Fri, 2 Oct 2015 13:05:07 +0000 (14:05 +0100)]
devtool: update-recipe: avoid updating patches that have not changed
Use "git cherry" against the original tag that we made when we extracted
the source in order to find the revisions that are definitely new. This
allows you to modify a commit in the middle of the series and then run
devtool update-recipe and not have the subsequent patches unnecessarily
modified.
Fixes [YOCTO #8388].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Also default to enable X11/Wayland support or WebGL according
to enabled DISTRO_FEATURES.
Signed-off-by: Carlos Alberto Lopez Perez <clopez@igalia.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Thu, 10 Sep 2015 14:31:26 +0000 (16:31 +0200)]
fontcache: allow to pass extra parameters and environment to fc-cache
* this can be useful for passing extra parameters, pass
-v by default to see what's going on in do_rootfs
* we need to use this for extra parameter we implemented
in fontconfig:
--ignore-mtime always use cache file regardless of font directory mtime
because the checksum of fontcache generated in do_rootfs
doesn't match with /usr/share/fonts directory as seen on
target device causing fontconfig to re-create the cache
when fontconfig is used for first time or worse create
new cache in every user's home directory when /usr/
filesystem is read only and cache cannot be updated.
Running FC_DEBUG=16 fc-cache -v on such device shows:
FcCacheTimeValid dir "/usr/share/fonts" cache checksum 1441207803 dir checksum 1441206149
* my guess is that the checksum is different, because pseudo
(which is unloaded when running qemuwrapper) or because some
influence of running the rootfs under qemu.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Using ON/OFF instead of True/False is exactly the same for cmake
(is case insensitive).
* But WebKitGTK+ preffers (and uses) the first option. So when you
check which values were enabled for the build (at log.do_configure)
you will see that every option that was not modified will print either
OFF or ON, meanwhile the options modified by this recipe will print
True or False. For example:
[...]
-- ENABLE_THREADED_COMPOSITOR OFF
-- ENABLE_PLUGIN_PROCESS_GTK2 .............. ON
-- ENABLE_MINIBROWSER True
[...]
Signed-off-by: Carlos Alberto Lopez Perez <clopez@igalia.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Wed, 30 Sep 2015 08:19:55 +0000 (01:19 -0700)]
smart:cache.py: getPackages() matches name + arch
It only matched name ony in the past, for example:
smart install busybox (matched)
but:
smart install busybox@core2_64 (didn't match)
The installation is very slow when no match since it would seach all the
packages in the repo, and what we use mostly in oe-core is the second
case, so the installation is very slow when install COMPLEMENTARY
packages such as the task do_populate_sdk.
Markus Lehtonen [Thu, 1 Oct 2015 10:03:36 +0000 (13:03 +0300)]
devtool: modify: use correct local files directory name
The name of the directory for local source files under srctree is
'oe-local-files', not 'local-files'. Fixes a bug that slipped through
in b7ab82485e4514e07ab8a76e554da27ddc92e6c0.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jussi Kukkonen [Thu, 1 Oct 2015 08:04:36 +0000 (11:04 +0300)]
xuser-account: Take over xuser specific D-Bus policy
Move connmans xuser-related D-Bus policy to a separate file that
xuser-account installs: This way connman does not need to depend on
xuser-account. Add policies for bluez and ofono in the same file.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
