Jackie Huang [Fri, 30 Aug 2013 01:56:36 +0000 (09:56 +0800)]
remove the unnecessary protocol parameters
It's not necessary to specify the protocol parameter when it's the
default protocol for the fetcher, e.g. the default protocol for
git fetcher it git, "protocol=git" isn't needed.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stefan Stanacar [Fri, 30 Aug 2013 09:24:32 +0000 (12:24 +0300)]
lib/oeqa: move skeletoninit.py where it belongs
OE-core commit fcc59cbcdb1550489d372edf9f465efa7165245f /
poky commit 748ddc39e56623f4e48987f0467f4722f6e162f2 added a new test, but
in the wrong location.
I took the patch from Alex's branch but renamed it from meta/lib/oeqa/runtime/skeleton.py to meta/lib/oeqa/skeletoninit.py before sending. This was
unintentional, it should have been under meta/lib/oeqa/runtime.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Zhang Xiao [Tue, 27 Aug 2013 02:07:43 +0000 (10:07 +0800)]
libnfsidmap: Add and modify idmapd.conf
add configuration file to make rpc.idmapd to not report below error:
rpc.idmapd: Skipping configuration file "/etc/idmapd.conf": No such file or directory
rpc.idmapd: Could not find group "nobody"
Paul Eggleton [Wed, 28 Aug 2013 15:39:19 +0000 (16:39 +0100)]
busybox: set default log buffer size to 64 at compile time
This provides a more reasonable log buffer size to avoid losing earlier
events, and 64K is not a problem for modern systems. When the buffer is
used on sysvinit-based systems, which it isn't by default, 64K is already
the runtime default size unless /etc/syslog-startup.conf is modified or
deleted, so this only really affects systems using systemd. This
completely removes the need for the busybox bbappend in meta-oe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stefan Stanacar [Sun, 25 Aug 2013 00:46:55 +0000 (01:46 +0100)]
classes/testimage: add support for finding tests in other layers
A layer can add tests in lib/oeqa/runtime (provided it extends BBPATH as
normal) and enable them with TEST_SUITES_append = " testname". Test
module names shouldn't collide though.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Stefan Stanacar [Wed, 28 Aug 2013 10:52:09 +0000 (13:52 +0300)]
classes/testimage: increase default boot timeout
While I can't reproduce on local builds, sometimes images fail
to boot on AB (which runs many builds at once). Assuming
there isn't something weird going on, let's just give it more time.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Stefan Stanacar [Wed, 28 Aug 2013 09:56:45 +0000 (12:56 +0300)]
lib/oeqa/runtime: remove some unnecessary checks from setUpModule
These checks are unnecessary.
setUpModule is run when a module is loaded and we
shouldn't run commands on the target here, (plus if
ssh doesn't work we error out in setup multiple times, instead
of skipping the real test, which might depend on test_ssh).
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Bruce Ashfield [Wed, 28 Aug 2013 20:12:19 +0000 (16:12 -0400)]
linux-yocto/3.10: fix ssh login and restore CC_OPTIMIZE_FOR_SIZE
Updating the BSP SRCREVs with the following changes:
7144bcc Revert "timer_list: Split timer_list_show_tickdevices" 1c0d1d8 Revert "timer_list: Convert timer list to be a proper seq_file"
To temporarily fix the ability to log in via ssh on some host/image combinations.
Updating the meta SRCREV for:
cd502a8 meta/standard: standard configuration fragment must be first
Which was incorrectly overriding feature and arch configuration values.
[YOCTO #5064]
[YOCTO #5062]
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mihai Prica [Tue, 27 Aug 2013 14:12:05 +0000 (14:12 +0000)]
midori: add version 0.5.5 from meta-gnome
Midori is a lightweight web browser that uses the WebKit
rendering engine and the GTK interface. This allows a more
easy testing of the functionality of webkit-gtk component
that is already in oe-core.
Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mihai Prica [Tue, 27 Aug 2013 14:14:13 +0000 (14:14 +0000)]
python-docutils: add version 0.11 from meta-oe
Docutils is a text processing system for processing plaintext
documentation into useful formats(HTML, XML, man-pages). This is
required by the Midori web-browser.
* Update 0.5 from meta-oe to 0.11.
Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joe Slater [Mon, 26 Aug 2013 23:38:45 +0000 (23:38 +0000)]
dpkg: fix configuration issue for mips64
CQID: 431771
configure cannot determine the proper cpu, os, or
architecture for mips64, and possibly other arch's,
because of faulty code added to Arch.pm in the latest
release from upstream. We remove that code.
Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Thu, 22 Aug 2013 02:16:30 +0000 (02:16 +0000)]
systemd: Upgrade to 206
Add new PACKAGE systemd-rpm-macros, this will hold
the macros which are interesting when rpm is used as
package management backend
Forward port uclibc only patches. Add a new patch
to stub out use of preadv/pwritev in testcases
Delete patches that have been merged upstream in systemd
Remove force export of GPERF variable in environment
this was causing AC_CHECK_TOOL to not populate GPERF
variable as expected
systemd needs kmod to be present on rootfs so add it
to RDEPENDS
some services substitute discovered kmod when the service
file is generated during boot, however the discovered kmod
is from native sysroot and it gets into the service file
with absolute path. So specify the target path of kmod using
KMOD variable so the unit files have correct pointer to kmod
on target
Add a patch to make sure that mknod capability is checked
before the service which excercise mknod, this patch is also
submitted to upstream systemd
Bruce Ashfield [Mon, 26 Aug 2013 21:47:20 +0000 (21:47 +0000)]
linux-yocto: add bc-native dependency, and move to linux-yocto.inc
As reported by Martin Jansa <martin.jansa@gmail.com>, the following error happens
when building in a minimal environment:
| BC kernel/timeconst.h
| /bin/sh: bc: command not found
| make[3]: *** [kernel/timeconst.h] Error 127
| make[2]: *** [kernel] Error 2
| make[2]: *** Waiting for unfinished jobs....
kernel commit 70730bca [kernel: Replace timeconst.pl with a bc script] added
a kernel dependency on bc. To support the build of linux-yocto recipes in
these configurations, we add bc-native to the common dependencies.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Mon, 26 Aug 2013 17:28:29 +0000 (17:28 +0000)]
kern-tools: fix patch series to git tree validation
Previous changes to the kern-tools improved functionality to ensure that
as a series is considered, it is checked against the tree to confirm that
all patches are really applied.
There was a bug in the subject based detection, such that the first matching
patch was take, and not the last. This change ensures that we start from
the end of a series, not the start.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
and returns a 0 exit code (it thinks it succesfully removed the package,
when in reality it didn't), so we need to catch those specifically.
Also, sometimes output from download command is:
Saving cache...http://192.168.7.1:49456/rpm/x86_64_x32/psplash-default-0.1+git0+afd4e228c6-r15.x86_64_x32.rpm
and that tricks our smart download test, so use a regex there.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Chen Qi [Mon, 26 Aug 2013 06:43:55 +0000 (14:43 +0800)]
read-only-rootfs-hook.sh: check before bind mounting /var/lib
It's possible that /var/lib is on a separate writable partition. In such
situation, we should not bind mount /var/lib with tmpfs, becasue it's
already writable.
This patch fixes this problem by checking whether /var/lib is already
on a writable partition.
[YOCTO #4888]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Mon, 26 Aug 2013 06:43:54 +0000 (14:43 +0800)]
checkroot.sh: check for conflicting configurations
In our current boot scripts, two ways are used to determine whether
the rootfs is read-only or not. One by checking the READ_ONLY_ROOTFS
value in /etc/default/rcS, the other by checking the /etc/fstab entry.
>From a normal Linux user's point of view, the way of checking the
/etc/fstab entry is preferred. However, as there are several boot scripts
that need to know whether rootfs is read-only or not, checking /etc/fstab
in each script brings too much overhead. Thus, these boot scripts
use the READ_ONLY_ROOTFS value in /etc/default/rcS.
In normal use cases, there would be no problem, as both /etc/default/rcS and
the /etc/fstab are modified at rootfs time. However, if the user changes
the mount option for rootfs in /etc/fstab to read-write, and he/she forgets
to change the value in /etc/default/rcS, there would be unexpected results.
For example, the udev-cache would still be disabled.
So at a minimal, a check for conflicting configurations between /etc/fstab
and /etc/default/rcS should be added in checkroot.sh so that there would be
reasonable warnings if users have configured the system in a non-consistent
way.
[YOCTO #4880]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
liangcao [Fri, 23 Aug 2013 21:40:35 +0000 (14:40 -0700)]
SPDX:real-time license scanning and SPDX output.
SPDX integrates real-time license scanning, generates
SPDX standard output and license verification
information during the OE-Core build process. The
existing module includes scanning patched packages
and creating package and file level SPDX documents.
Stefan Stanacar [Thu, 22 Aug 2013 13:25:52 +0000 (16:25 +0300)]
classess/testimage: change default test suites
Some new tests were added, safe to have them in the defaults
for sato-sdk and sato. Not all of the new tests are here though,
either because they aren't applicable to default images or take too long.
(like build iptables/cvs/sudoky ones, they can be enabled
in local.conf and a special target on AB setups.). Also reorder them a bit.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Robert Yang [Thu, 22 Aug 2013 07:54:44 +0000 (15:54 +0800)]
image_types.bbclass: replace genext2fs with populate-extfs.sh
* The benefits:
- Really support ext4
- Support the sparse file (we lost the sparse file in the image in the
past, the sparse file became into the common file)
- Fix the error reported by fsck: (ext2/ext3)
Inode 1025, i_size is 16384, should be 17408.
- Have a uniform code for ext2/3/4 generation
* Comments from Darren Hart:
Basically, genext2fs doesn't support creating ext4 filesystems. It
creates, as I understand it, an ext2 filesystem, then adds a journal,
and sets some bits. It can't support the newer features like extents. So
what we end up with is a bit of a hack for a filesystem.
The ext tools (e2fsprogs) unfortunately don't provide an integrated
solution for generating prepopulated filesystem images as many other
mkfs* tools do. One thing missing was symlink support in libext2fs. I
added that support and demonstrated a script which uses the e2fsprogs
debugfs tool that can populate the newly formatted filesystem from a
directory and without root privileges.
[YOCTO #3848]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Stefan Stanacar [Thu, 22 Aug 2013 12:02:55 +0000 (15:02 +0300)]
lib/oeqa: change behaviour for unskippable tests
When a test module wants to be skipped because it doesn't
apply to the image but it was nevertheless a required
test (one in TEST_SUITES), we issued an warning that it
was a required test and went on with running the module.
Usually all tests in the module failed (e.g gcc tests on a non-sdk image),
but this allowed us to know that something went wrong with the image
(some package/feature didn't make it).
However, instead of just issuing an warning and running the tests
it's better to throw an exception. The traceback will tell us what's wrong,
and we don't run every single test method.
Output will look like this:
--snip--
| NOTE: Test modules ['oeqa.runtime.ping', 'oeqa.runtime.ssh', 'oeqa.runtime.gcc']
| NOTE: Found 5 tests
| test_ping (oeqa.runtime.ping.PingTest) ... ok
| test_ssh (oeqa.runtime.ssh.SshTest) ... ok
| ERROR
|
| ======================================================================
| ERROR: setUpModule (oeqa.runtime.gcc)
| ----------------------------------------------------------------------
| Traceback (most recent call last):
| File "/mnt/back/yocto/poky/meta/lib/oeqa/runtime/gcc.py", line 8, in setUpModule
| skipModule("Image doesn't have tools-sdk in IMAGE_FEATURES")
| File "/mnt/back/yocto/poky/meta/lib/oeqa/oetest.py", line 108, in skipModule
| "\nor the image really doesn't have the requred feature/package when it should." % (modname, reason))
| Exception:
| Test gcc wants to be skipped.
| Reason is: Image doesn't have tools-sdk in IMAGE_FEATURES
| Test was required in TEST_SUITES, so either the condition for skipping is wrong
| or the image really doesn't have the requred feature/package when it should.
|
| ----------------------------------------------------------------------
| Ran 2 tests in 1.036s
|
| FAILED (errors=1)
| NOTE: Sending SIGTERM to runqemu
--snip--
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Stefan Stanacar [Thu, 22 Aug 2013 11:47:21 +0000 (14:47 +0300)]
lib/oeqa: make it possible to restart the target
Tweak QemuRunner so we can actually restart the
qemu target in a test (if we want more memory for example).
Also add a restart method to the base test class so that tests
can use it.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Mihai Lindner [Mon, 19 Aug 2013 10:46:16 +0000 (13:46 +0300)]
lib/oeqa/utils: qemurunner: save host IP address
Save host IP address to host_ip.
Read /proc/PID/cmdline on host to look for IPs of target and host;
instead of running 'ps'.
Also removed some extra empty lines from file.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Stefan Stanacar [Tue, 20 Aug 2013 13:13:29 +0000 (16:13 +0300)]
lib/oeqa/runtime: rpm: add install and erase tests
Copies to target rpm-doc file from deploy_dir
and tries to install and then remove that package.
rpm-doc was chosen because it's small, it only adds
a few files to target, and it's almost always found in
deploy_dir for images with package-management/rpm.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Mihai Prica [Fri, 23 Aug 2013 12:57:00 +0000 (15:57 +0300)]
connman-gnome: fix DHCP segfault
In networks that don't have a DHCP server configured, ipv4 address
allocation fails and the ipv4 structure doesn't get populated.
The patch checks this case also.
[YOCTO #3945]
Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Emilia Ciobanu <emilia.maria.silvia.ciobanu at intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Paul Eggleton [Fri, 23 Aug 2013 11:20:30 +0000 (12:20 +0100)]
busybox: enable shared memory logging for systemd
The default command-line options for launching busybox's syslogd are
"-C" if using sysvinit; but because we use /etc/default/busybox-syslog
when using systemd which the sysvinit initscript doesn't use, and no
/etc/default/busybox-syslog is installed by default in OE-Core, the
default arguments with systemd were no arguments at all with OE-Core
alone. Effectively merge in the bbappend from meta-oe that adds a
default file in order to set the default options to "-C" for systemd as
well.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Robert Yang [Thu, 18 Jul 2013 09:52:16 +0000 (17:52 +0800)]
e2fsprogs: add populate-extfs.sh
This script is originally from Darren Hart, it will be used for creating
the ext* filesystem from a given directory, which will replace the
genext2fs in image_types.bbclass at the moment, we may use the mke2fs to
replace this script again when it has the initial directory support.
Changes of the script:
* Rename it from mkdebugfs.sh to populate-extfs.sh
* Add a simple usage
* Add checking for the number of the parameters
* Add the "regular empty file" and "fifo" file type
* Set mode, uid and gid for the file
* Save the command lines to a file and batch run them
* Change the error message
* Improve the performance
* Add the support for hardlink
[YOCTO #3848]
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Robert Yang [Thu, 22 Aug 2013 07:47:23 +0000 (15:47 +0800)]
e2fsprogs: properly set up extent header in do_write
do_write doesn't fully set up the first extent header on a new
inode, so if we write a 0-length file, and don't write any data
to the new file, we end up creating something that looks corrupt
to kernelspace:
EXT4-fs error (device loop0): ext4_ext_check_inode:464: inode #12: comm
ls: bad header/extent: invalid magic - magic 0, entries 0, max 0(0),
depth 0(0)
Do something similar to ext4_ext_tree_init() here, and
fill out the first extent header upon creation to avoid this.
[YOCTO #3848]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Robert Yang [Thu, 18 Jul 2013 09:50:50 +0000 (17:50 +0800)]
e2fsprogs: the max length of debugfs argument is too short
The max length of debugfs argument is 256 which is too short, the
arguments are two paths, the PATH_MAX is 4096 according to
/usr/include/linux/limits.h, so use BUFSIZ (which is 8192 on Linux
systems), that's also what the ss library uses.
This patch has been reviewed by the linux-ext4 mailing list, but isn't
merged atm.
[YOCTO #3848]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
- path normalization ('normalize' flag, defaults to enabled)
- existence verification for paths we know should exist ('mustexist' flag)
- supports clean handling of relative paths ('relativeto' flag)
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Kai Kang [Thu, 22 Aug 2013 09:59:29 +0000 (17:59 +0800)]
alsa-lib: fix function definitions error for mips
Functions atomic_add(s) and atomic_sub(s) are defined with 'extern
__inline__' that may cause compile fails when cross compile for mips.
The error message looks like:
| pcm/.libs/libpcm.a(pcm_meter.o): In function
`snd_pcm_meter_update_scope':
| .../alsa-lib-1.0.27.2/src/pcm/pcm_meter.c:139: undefined reference to
`atomic_sub'
Replace the 'extern __inline__' with 'static __inline__' to fix this
issue.
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Ross Burton [Thu, 22 Aug 2013 14:36:18 +0000 (15:36 +0100)]
runqemu-ifup: when tunctl can't be found, say what package builds it
If runqemu is used without actually building any qemu images (i.e. you
downloaded the images) it's likely that qemu-helper-native hasn't been built.
Instead of just saying what command can't be found, tell the user how to solve
their problem.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Xufeng Zhang [Thu, 22 Aug 2013 03:12:28 +0000 (11:12 +0800)]
openssl: avoid NULL pointer dereference in three places
There are three potential NULL pointer dereference in
EVP_DigestInit_ex(), dh_pub_encode() and dsa_pub_encode()
functions.
Fix them by adding proper null pointer check.
Khem Raj [Thu, 22 Aug 2013 02:20:42 +0000 (19:20 -0700)]
glib-2.0: Specify libiconv when building on uclibc
We use GNU libiconv seprate package on uclibc
specifying this makes the configure clear of not
trying to detect glibc/iconv and then also finding
libiconv in sysroot and confusing itself with errors like
| gconvert.c:66:2: error: #error GNU libiconv not in use but included iconv.h is from libiconv
| #error GNU libiconv not in use but included iconv.h is from libiconv
| ^
We need this for certain nativesdk recipes, as we can't rely on the
certificate path or bundle path being the same across distros, and it's useful
in many cases on the target as well.
This is based on the 20130119 recipe from meta-oe, with the following changes:
- use the debian git repository to avoid vanishing sources
- obey our target paths
- default to a sysroot relative to the script location (make relocatable)
- define SUMMARY
- don't inherit autotools, this isn't an autotools package
- add MPL-2.0 to LICENSE, as that's the license of the certdata
- install the script man page
- use a native rather than cross recipe, as it's not bound in any way to the
target system
- add nativesdk to bbclassextend, for use in SDKs
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Paul Eggleton [Sun, 25 Aug 2013 19:37:44 +0000 (20:37 +0100)]
xserver-nodm-init: improvements from meta-oe
Bring in some changes from the meta-oe version of this script in order
to bring them closer together. (Unfortunately it does not completely
supersede the recipes in meta-oe - there is still some unification to be
done between x11-common and xserver-common.)
* Add systemd support (with extensions for ROOTLESS_X)
* Remove sudo from RDEPENDS_${PN} since this hasn't been used by this
for a long time
* Rearrange recipe slightly to make the order logical
A couple of additional improvements at the same time:
* Use ROOT_HOME for root's home directory
* Set short description in SUMMARY instead of DESCRIPTION
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Richard Purdie [Sat, 24 Aug 2013 16:01:20 +0000 (17:01 +0100)]
classes: Remove references to _remove in function names since this may become a bitbake keyword
There is a good chance we might want to support a bitbake operator
"_remove" which works in a similar way to _append and _prepend. As
such, we can't use those keywords in function or variable names.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Bruce Ashfield [Fri, 23 Aug 2013 18:08:20 +0000 (14:08 -0400)]
linux-yocto: introduce v3.10
Introduce the 3.10 kernel. This is based on the 3.10.9 upstream kernel
and replaces the 3.8 recipes, which will be removed once all reference
boards have been updated.
3.10 also the latest LTSI and will be updated with that content when it
becomes available.
Other features of the 3.10 kernel include:
- refreshed -rt support
- refreshed yaffs2, aufs3
- cryptodev
- bfs, edf, and OCF staged features
- scrubbed and updated meta data for v3.10
- improved tools support for meta data updates and queue maintenance
- patch carry forward from all previous linux-yocto kernels and
configuration.
This kernel has been built and boot tested on all qemu machines and architectures.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
kernel commit 24b9f5017 [[media] V4L: Remove deprecated image centering controls]
removed the definitions of V4L2_CID_HCENTER and V4L2_CID_VCENTER after three
years of depreciation.
The ioctl values are still free, and the case statement which processess them
in v4l2 userspace falls through to the proper replacement. So in the short
term, we can explicitly define them using the old absolute values, and everything
will work.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The autobuilders and their long paths are still triggering errors during
the headers installation. Reinstate the previous patch for this,
after updating for 3.10.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The addition of ptrace_peeksiginfo_args to the uapi in kernel commit 84c751bd [ptrace: add ability to retrieve signals without removing from a queue (v4)]
means that existing applications using glibc versions that define ptrace_peeksiginfo_args
in sys/ptrace.h will get duplicate structure definitions like:
| In file included from /poky-master/build/tmp/work/i586-poky-linux/strace/4.8-r0/strace-4.8/process.c:66:0:
| /poky-master/build/tmp/sysroots/qemux86/usr/include/linux/ptrace.h:58:8: error: redefinition of 'struct ptrace_peeksiginfo_args'
| struct ptrace_peeksiginfo_args {
| ^
| In file included from /poky-master/build/tmp/work/i586-poky-linux/strace/4.8-r0/strace-4.8/defs.h:159:0,
| from /poky-master/build/tmp/work/i586-poky-linux/strace/4.8-r0/strace-4.8/process.c:37:
| /poky-master/build/tmp/sysroots/qemux86/usr/include/sys/ptrace.h:191:8: note: originally defined here
| struct ptrace_peeksiginfo_args
| ^
| make[2]: *** [process.o] Error 1
Reverting to the previous status of not exporting this structure temporarily
fixes applications, until they can be adjusted to not mix sys/ptrace.h and
linux/ptrace.h includes.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Bruce Ashfield [Fri, 23 Aug 2013 18:08:18 +0000 (14:08 -0400)]
linux-libc-headers: update to v3.10
Now that the 3.10 kernel has been released we can bump the libc-headers to
that version and remove the 3.8 variant. Userspace compatibility is
maintained through kernel versions, we also make the single 3.10 version the
toolchain default.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 23 Aug 2013 18:08:17 +0000 (14:08 -0400)]
guilt: update to latest git version
Uprev guilt to the latest guilt version from its upstream repository.
As part of the uprev all of the previous changes required for the
yocto kernel tools to use git to manipulate series files have been
dropped. These changes were specific to circumventing parts of guilt's
internal santiy checking to allow specific Yocto kernel manipluation
of sub-series files.
Since the kernel tools no longer need guilt, we can use an up to date
and nearly pure upstream version of guilt.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 23 Aug 2013 18:08:16 +0000 (14:08 -0400)]
kern-tools: usability, bug fixes and no guilt
Updating the kern-tools SRCREV to pick up the following fixes:
60a894e kgit-s2q: add proper commit ID handling for mixed am/apply usage 3b08257 kgit-s2q: delete pruning of path support. c5868b4 kgit-s2q: Restore implicit exit status to "git apply" section 1bd00b9 kgit-scc: mask warnings from cleanup phase 5 bb75299 kgit-s2q: fix commit warp when running "git am --abort" ef9571b kgit-scc: cleanup git rebase-apply dir fdb7d21 kgit-scc: ensure treegen stops if a meta series fails 008987b config: add kconfig cleaning options 69ff569 kgit-s2q: strip blank lines and comments e7b4540 kgit-init: disable garbage collection on a new tree 417eaed kgit-s2q: delete old LTSI patch dir finding code 21f2200 kgit-scc: better error checking on resume ad5084c kern-tools: use .meta as meta data container 1deb5d8 kgit-meta: don't push patches without a series file eb431a1 kgit-s2q: aid patch reject resolution via helper scripts f859c40 kgit-s2q: only use patch annotations when explicitly asked 333ae18 kgit: speed patch application by batching patches bf6991d kgit: teach tools about non-default meta dirs bcfc712 kgit-s2q: usability improvements cb28803 kgit-s2q: fix patch prefix stripping. 37f40e1 kgit-s2q: warn/exit with error if patch not in series f4704d2 kgit-s2q: consistent rm usage e11819c kgit-s2q: standardize on use of git mailinfo 36a5eda kgit: remove guilt dependency c461a4f spp/scc: export mark commands to meta-series 5311162 updateme: ensure that generated features are only used once 4f7a263 kgit-checkpoint: clear .gitignore for meta branch 21ee6f2 updateme: enforce a matching machine b08749d kgit-scc: remove -meta files after consruction
These are bug fixes, usability changes as well as the removal of the
guilt dependency. During the uprev of the guilt package, the amount of
circumvention of the typical guilt workflow and checks meant that using
it as a series -> branch manager was no longer appropriate. As a result
a new tools kgit-s2q (series 2 queue) was created based on git-quiltimport,
git am, and the LTSI tree generation scripts.
The result is better series to branch validation, faster application and
a simpler management model. This tool is backwards compatible with any
tree previously constructed with guilt. We are now "guilt free"
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
