When watchdog works on ping mode, the system will be rebooted since
watchdog can not receive the expected ECOREPLY on a setting interval.
Ping mode uses a raw socket to send a ECO packet, then uses select()
to wait and recvfrom() to receive the ECOREPLY packet, if select()
shows the data is ready, and the data is not the expected ECOREPLY,
and waiting time is not overdue, it will continue use select() and
recvfrom().
Problem is that the raw socket can receive any icmp packets, if we do
not set filters, and there are many icmp packets on socket, this
program will not find its interested ECOREPLY packet in a special
interval, which makes the ping mode fail.
Other program is that watchdog sometime can not reach the call of
recvfrom to try to receive packets since tv_sec of struct timeval
of select parameter is 0.
The timeout of select() is the result of ping interval minusing the
time of calling gettimeofday spending, when ping interval is 1 second,
and the call of gettimeofday() spends several useconds, the tv_sec of
struct timeval of select parameter must be 0, at that condition, we
should think it is valid of tv_sec of struct timeval of select parameter
be 0
Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 10 Jul 2012 13:26:18 +0000 (13:26 +0000)]
bitbake.conf: Add git-native to ASSUME_PROVIDED
Originally, git was something new, not installed everywhere and had commandline
stability problems. This has changed and git it no longer makes sense to
continually build this when the system installed version is likely sufficient.
This speeds up build since recipes no longer have to wait for git-native to build
if they're fetched from a git:// SRC_URI.
Also add git to the sanity checks and drop the no unneeded svn reference.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Tue, 17 Jul 2012 18:44:19 +0000 (19:44 +0100)]
webkit-gtk: remove no-parallel bodge
This workaround was originally for GNU Make 3.82 which upstream was blaming
for a parallel build failure. Since then I've changed numerous variables
and now parallel builds are working with 3.82 (and succeed in 20 minutes
instead of 2 hours).
Revert the change until we've more data about what causes the breakage, then
we can bring it back with more finesse.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Richard Purdie [Tue, 17 Jul 2012 11:59:28 +0000 (12:59 +0100)]
scripts/bitbake: Check the git-native version and build it if necessary
We require git version 1.7.5 or later for the git remote --mirror=xxx syntax.
If we have an older version of git, this patch ensure we build git-replacement-native.
We add an alternative PROVIDES in the same way as tar-native to allow this script
to trigger the build whilst still allowing git-native in ASSUME_PROVIDED.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
terminal.py: Fix Xfce on ubuntu/debian; some cleanup
* Xfce class was setting and passing wrong variable for ubuntu/debian.
* Xfce class was using -e instead of -x for passing command. The former creates
a shell escape nightmare
* Clean up local and instance/class variables with same name but different usage.
* Remove side-effect and directly return formatted command for clarity.
Signed-off-by: Jeffrey C Honig <jeffrey.honig@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
meta-ide-support: Add native qemu support for meta-ide-support
[YOCTO #2761]
This patch fixed the issue that after "bitbake meta-ide-support" and try to start qemu and it will fail. This is due to the meta-ide-support lacking dependency for qemu native and ended up using qemu under /usr/bin. Fix the issue by adding dependency for qemu native in meta-ide-support and also add the path info in the environment-setup script.
Mark Hatle [Tue, 10 Jul 2012 20:54:38 +0000 (15:54 -0500)]
toolchain-scripts: Sync the SDK/ADT values to the build system
The build system passes specific TUNE (fundamental) flag values to various
tools instead of using a shell wrapper or similar. It is important that the
build system and ADT/SDK match the behaviors exactly, or we are likely to
have differences in the way build-system and external components are built
leading to configuration, compilation and/or run-time problems.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 16 Jul 2012 14:52:19 +0000 (14:52 +0000)]
useradd.bbclass: Fix for multilib builds
The class adds a setscene dependency on base-passwd as well as adds this to DEPENDS.
The DEPENDS version will be auso-converted to include MLPREFIX whilst the setscene
dependency will not. This result in errors about non-existent tasks.
This patch ensures MLPREFIX is added when it is needed and fixes various
build failures. Whether we should have two base-passwd recipes in a multilib
system is a question which would need to be addressed by future changes.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Nitin A Kamble [Thu, 3 May 2012 17:26:35 +0000 (10:26 -0700)]
tar: fix build with automake 1.12.x
automake 1.12.x automatically deletes empty directories, so
the additional rmdir from the do_install_append fails.
cleanup the do_install_append for automake 1.12.x
Avoid this error:
| rmdir: failed to remove `/srv/home/nitin/builds/build-gcc47/tmp/work/i586-poky-linux/tar-1.26-r1/image/usr/sbin/': No such file or directory
NOTE: package tar-1.26-r1: task do_install: Failed
no PR bump as no change in the output.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
automake 1.12.x automatically deletes empty directories, so
the additional rmdir from the do_install_append fails.
cleanup the do_install_append for automake 1.12.x
Avoids this build issue:
| rmdir: failed to remove `/srv/home/nitin/builds2/build0/tmp/work/i586-poky-linux/gpgme-1.3.2-r0/image/usr/libexec': No such file or directory
| ERROR: Function failed: do_install
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Nitin A Kamble [Thu, 3 May 2012 20:30:20 +0000 (13:30 -0700)]
libfm: fix build with automake 1.12.x
automake 1.12.x automatically deletes empty directories, so
the additional rmdir from the do_install_append fails.
cleanup the do_install_append for automake 1.12.x
Avoids this build issue:
| rmdir: failed to remove `/srv/home/nitin/builds/build-gcc47/tmp/work/i586-poky-linux/libfm-0.1.17-r4/image/usr/lib/gio/modules/': No such file or directory
NOTE: package libfm-0.1.17-r4: task do_install: Failed
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Nitin A Kamble [Thu, 3 May 2012 18:12:34 +0000 (11:12 -0700)]
xf86-video-vmware: fix build with automake 1.12.x
automake 1.12.x automatically deletes empty directories, so
the additional rmdir from the do_install_append fails.
cleanup the do_install_append for automake 1.12.x
Fixes this build issue:
| rmdir: failed to remove
`/srv/home/nitin/builds/build-gcc47/tmp/work/i586-poky-linux/xf86-video-vmware-2_12.0.1-r17.1/image/usr/bin':
No such file or directory
NOTE: package xf86-video-vmware-2_12.0.1-r17.1: task do_install: Failed
No PR bump as no change in the output.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Nitin A Kamble [Thu, 3 May 2012 17:39:02 +0000 (10:39 -0700)]
telepathy-glib: fix build with automake 1.12.x
automake 1.12.x automatically deletes empty directories, so
the additional rmdir from the do_install_append fails.
cleanup the do_install_append for automake 1.12.x
avoid this issue:
| rmdir: failed to remove `/srv/home/nitin/builds/build-gcc47/tmp/work/i586-poky-linux/telepathy-glib-0.18.1-r0/image/usr/bin': No such file or directory
NOTE: package telepathy-glib-0.18.1-r0: task do_install: Failed
no PR bump as no change in the output
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Nitin A Kamble [Thu, 3 May 2012 17:29:32 +0000 (10:29 -0700)]
libgcrypt: fix build with automake 1.12.x
automake 1.12.x automatically deletes empty directories, so
the additional rmdir from the do_install_append fails.
cleanup the do_install_append for automake 1.12.x
avoid this issue:
| rmdir: failed to remove `/srv/home/nitin/builds/build-gcc47/tmp/work/i586-poky-linux/libgcrypt-1.5.0-r0/image/usr/sbin': No such file or directory
NOTE: package libgcrypt-1.5.0-r0: task do_install: Failed
no PR bump as no change in the output
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch fixes building this tool in cross environment
It uses tools such as CC, HOST_CC, I386_CC etc.
and as long as you are building native it does not
matter since they all are same namely 'gcc' but
in cross compiling that wont work. So we make the
makefiles and configure scripts aware of that fact
Upstream hosts this program in a svn repo. So change
the SRC_URI to official svn repo. With git we were
checking out a lot more that just mkelfimage which
is not required.
There were unpackaged empty directories too so
we make sure they are removed as well.
kxgettext.o is generated when building ppc kernels
so we end up with packaging errors like
> ERROR: QA Issue: Architecture did not match (20 to 62) on
> /work/virtex5-poky-linux/linux-xilinx-2.6.38-r00/packages-split/kernel-dev/usr/src/kernel/scripts/kconfig/kxgettext.o
This patch adds a fix where arm endianness is detected correctly
secondly it adds a missing dependency on libatomics-ops
which was found when build in clean tmpdir and populating
it from a valid sstate.
lib/oe/sstatesig.py: Exclude git-native from sstate checksum
gcc exposed this issue where cross gcc recipes were not having
same task checksums as libgcc or gcc-runtime the target recipes
which use same shared workdir and it was triggering the unpack
fetch and patch tasks to reexecute and hence the trouble
Now that we have more than 1 package to consider lets combine
the check
These patches are backport from gcc mainline
they fix issues where eglibc was not compilable
for e5500+ due to missing vector intrinsics
It obsoletes the existing e5500 patch
do_headerfix task is essentially editing configuration
headers in sources which can well be maintained as a
patch which is easier to spot errors (if any) than
dynamically edited source tree
pam_unix_acct.c: In function '_unix_run_verify_binary':
pam_unix_acct.c:97:19: error: storage size of 'rlim' isn't known
pam_unix_acct.c:106:19: error: 'RLIMIT_NOFILE' undeclared (first use in
this function)
pam_unix_acct.c:106:19: note: each undeclared identifier is reported
only once for each function it appears in
1.49.0 is not buildable with eglibc 2.16 since
it exposes a define TIME_UTC which is also used
in boost until 1.50.0 when it was renamed to
TIME_UTC_ so instead of porting needed patches
we upgrade boost to latest release
gettext,m4,augeas,gnutls: Account for removal of gets in eglibc 2.16
These recipes use gnulib which needs this change to use gets
when its defined and not otherwise. Until that change goes into
gnulib and then all these package upgrade gnulib in their sourcebase
we patch them
Martin Jansa [Mon, 16 Jul 2012 08:25:49 +0000 (10:25 +0200)]
libx11: fix makekeys build
* on hosts without libx11 installed it fails with
| makekeys.c:33:27: fatal error: X11/Xresource.h: No such file or directory
since oe-core rev 52d4ff7b35602faa52360a3e7a800891ef60c739
* upstream added -I$(top_srcdir)/include in 24283d40b1e4314c6647dda49d2a159833341a8b
to ensure that right Xresource.h version is used, but we're building
makekeys outside source tree (x11_disable_makekeys.patch), so we need
to pass -I${S}/include in our makekeys build too
* building makekeys outside source tree isn't probably needed anymore
and recipes should be updated to reflect that, upstream fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=22584
http://cgit.freedesktop.org/xorg/lib/libX11/commit/src/util/Makefile.am?id=b2487d07f7b355f230a56e32c763acd08862735c
http://cgit.freedesktop.org/xorg/lib/libX11/commit/src/util/Makefile.am?id=24283d40b1e4314c6647dda49d2a159833341a8b
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
/home/kraj/work/angstrom/sources/openembedded-core/build/tmp-eglibc/work/armv5te-oe-linux-gnueabi/gdb-7.4.1-r0.0/gdb-7.4.1/gdb/linux-nat.h:79:18:
error: field 'siginfo' has incomplete type
mirrors: Add debian archive snapshot mirrors to search list
I ran across this problem when apt 0.7.14 was not fetchable
from regular debian mirrors and existing snapshot mirror
did not have it either since we did not use proper syntax
so it was not hitting that.
Ting Liu [Fri, 13 Jul 2012 05:14:25 +0000 (00:14 -0500)]
lsof: define linux C library type when using eglibc
lsof tries to compile a temp c source file and execute the binary to
determine linux C library type (file Configure, line 2689-2717).
It is inpracticable for cross-compilation and may have build issue on
some distros since it depends on host settings.
Fix below error when building for 64bit target on 64bit host:
[...]
| dsock.c:481:44: error: 'TCP_LISTEN' undeclared (first use in this function)
| dsock.c:482:45: error: 'TCP_CLOSING' undeclared (first use in this function)
[...]
| make: *** [dsock.o] Error 1
The actual issue exists in do_configure:
[...]
Testing C library type with cc ... done
Cannot determine C library type; assuming it is not glibc.
Which is in turn caused by missing 'gnu/stubs-32.h" when compiling
the temp c source file on host:
[...]
fatal error: gnu/stubs-32.h: No such file or directory compilation terminated.
file gnu/stubs-32.h is provided by 32bit glibc.
Signed-off-by: Ting Liu <b28495@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Richard Purdie [Thu, 12 Jul 2012 15:25:47 +0000 (16:25 +0100)]
crosssdk/nativesdk: Ensure EXTRA_OECONF_FPU is unset
If EXTRA_OECONF_FPU is left set, certain ARM variables related to hard-float
can get pulled in and trigger rebuilds of the crosssdk code. The best solution
is to simply force the variable to a known correct value for the SDK targets
currently supported in the same way as TARGET_FPU.
There is some slight rearrangement of the gcc code to ensure the variable is
always used to call the fpu function.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Richard Purdie [Thu, 12 Jul 2012 15:18:23 +0000 (16:18 +0100)]
sstate.bbclass: Move crosssdk before cross to ensure correct variables are set
There was a bug showing up where the crosssdk recipes were being installed as machine
specific in the sstate-control directory. This turned out to be due to the architecture
fields used by sstate being set incorrectly. The problem is that the crosssdk inherits
the cross class. It therefore needs to be listed in this if statement block before
the cross check, not after.
This should resolve some package architecture issue of crosssdk sstate files.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
sysvinit-inittab_2.88dsf.bb: Allow multiple serial port consoles to be defined
Set SERIAL_CONSOLES if you want to define multiple serial consoles, also if
you need to check for the presence of the serial consoles you can also define
SERIAL_CONSOLES_CHECK to determine if these are present when you boot. This
will prevent error message that pop up when the serial port is not present.
Andrei Gherzan [Thu, 12 Jul 2012 18:05:56 +0000 (21:05 +0300)]
image_types.bbclass: Default XZ_COMPRESSION_LEVEL to -e -6
Having XZ_COMPRESSION_LEVEL on -e -9 and -T 0 will make xz eat more
than 6Gb memory. Reduce this to -6 to make xz to use about 471Mb
on the tested machine.
Andrei Gherzan [Thu, 12 Jul 2012 14:31:54 +0000 (17:31 +0300)]
image_types.bbclass: Fix COMPRESS_CMD for xz to redirect compressed data to file
Having -c modifier makes xz to output the compressed data to stdout. In this
way the needed data will be in the do_rootfs log.
Redirect data to ${IMAGE_NAME}.rootfs.${type}.xz .
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Xin Ouyang [Thu, 21 Jun 2012 07:13:54 +0000 (15:13 +0800)]
cpan.bbclass: Fix CCFLAGS.
We should not just replace CCFLAGS with CFLAGS while compiling, because
this may cause run-time errors with perl's DynaLoader.pm.
Tested on qemux86 with new libnet-libidn-perl bb recipe:
root@qemux86:~# perl -e "use Net::LibIDN"
Not a CODE reference at /usr/lib/perl/5.14.2//DynaLoader.pm line 213.
END failed--call queue aborted at /usr/lib/perl/vendor_perl/5.14.2//Net/LibIDN.pm line 213.
Compilation failed in require at -e line 1.
BEGIN failed--compilation aborted at -e line 1.
Recently the tarball has been changing due the fact it gets rebuilt
nightly and timestamps are getting updated and changed internal to
the tarball. Moving back to SVN to try and address this.
Paul Eggleton [Mon, 9 Jul 2012 12:38:39 +0000 (13:38 +0100)]
classes/rootfs_deb: use more reliable check for package existence
It turns out "apt-cache showpkg" does return some information when a
package does not exist but another package recommends it, which can
occur for empty *-dev packages; so use "apt-cache policy" with a
different line count instead.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Peter Seebach [Wed, 11 Jul 2012 20:31:55 +0000 (15:31 -0500)]
package.bbclass: Allow overriding of debugedit starting path
In the usual case, the computed path used for debugedit to fix
up path references for the target filesystem is correct. However,
prebuilt binary components, such as prebuilt toolchains, can
have debug paths that do not reflect paths within the local
build directory. Providing an override lets us continue to use
the standard debugedit logic in package.bbclass.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
C language has 3 distinct char types:
char
unsigned char
signed char
A char has the same range of values as signed char on X86,
but same as unsigned char on ARM which made Slang's typecast()
and array_sort() unable to work for char value on ARM, since
Slang is assuming "char" as "signed char".
Now we change "char" as "signed char" explicitly in
util/mkslarith2.sl, and use it to regenerate src/slarith2.inc
Richard Purdie [Tue, 10 Jul 2012 13:31:33 +0000 (14:31 +0100)]
gconf: Disable gtk support
There are only a couple of helper utilities within gconf that need gtk+ as a
dependency and those are unused and pretty useless. We might as well drop
the dependency on gtk and allow more parallel builds by reducing dependency
bottlenecks.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
