terminal.py: Allow devshell/menuconfig on recent gnome-terminal
Recent versions of gnome-terminal does not support non-UTF8 charset:
https://bugzilla.gnome.org/show_bug.cgi?id=732127 as a result, devshell and
menuconfig tasks silently hang (error found on trace log of 'strace -f -v
-s 8192 -e write=2 bitbake -c devshell quilt-native': "Non UTF-8 locale
(ANSI_X3.4-1968) is not supported!"). As a workaround, clearing the LC_ALL
environment variable so it uses the locale. Once fixed on the gnome-terminal
project, this should be removed.
Tested on gnome-terminal versions:
GNOME Terminal 3.4.1.1
GNOME Terminal 3.14.2 (Default on Ubuntu 15.04)
[YOCTO #7791]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Cristian Iorga [Mon, 22 Jun 2015 11:12:37 +0000 (14:12 +0300)]
bluez5: upgrade to 5.31
Mostly a bug fix release,
with the the following improvements:
- support for handling BNEP setup response;
- support for setting GATT database security flags;
- support for setting discovery filters interface;
- support for user controlled advertising interface.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ed Bartosh [Mon, 22 Jun 2015 11:42:37 +0000 (14:42 +0300)]
wic: Add --compress-with command line option
Added -c/--compress-with command line option to 'wic create'
subcommand. This option is used to specify compressor
utility to compress the image produced by wic. gzip, bzip2 and
xz compressors are supported in this implementation.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Robert Yang [Fri, 26 Jun 2015 06:23:21 +0000 (23:23 -0700)]
sanity.bbclass: check /bin/sh is dash or bash
The build would fail when /bin/sh links to ksh or csh, we only test dash
and bash AFAIK.
* When /bin/sh -> csh:
$ bitbake quilt-native
$ bitbake quilt-native -cfetch
Illegal variable name.
Illegal variable name.
[snip]
uname: extra operand `2'
Try `uname --help' for more information.
* When /bin/sh -> ksh:
If there are only a few tasks running, for example,
"bitbake quilt-native", the build would be OK, but it would fail if we
run "bitbake world" for a while, there would be a lot of "Broken pipe"
errors:
Exception: CalledProcessError: Command
'cd /path/to/xx; find . -type d -print | tar -cf - -C /path/to/sysroot-destdir -p --files-from - --no-recursion | tar -xf - -C /path/to/xxx'
returned non-zero exit status 2 with output tar: This does not look like a tar archive
tar: Exiting with failure status due to previous errors
find: `standard output': Broken pipe
find: write error
[YOCTO #7917]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 25 Jun 2015 15:09:14 +0000 (16:09 +0100)]
lib/devtool/standard: Fix patch cleanup
If patches fail to apply with git, quilt it used as a fallback. If that
happens, the code in this class is meant to handle cleanup of these patch
files. In the case where ${S} is a subdir of the git tree, the code doesn't
correctly set the patches directory.
This change correctly sets the patches directory (which is different to the
location of the git repository).
[YOCTO #7911]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 25 Jun 2015 15:08:26 +0000 (16:08 +0100)]
lib/oe/patch: Fix git patch application for source in subdirectory
Similarly to:
http://git.yoctoproject.org/cgit.cgi/poky/commit/meta/lib/oe/patch.py?id=f205ccaf48ac36f4b26efc4aeb2e9d2939b28646
we need to fix patch application for source which is in a subdirectory.
Passing "." as the git directory or work-dir appears to work (or is ignored)
in some versions of git but does not work in others, probably quite correctly.
Since we have reporoot from the above patch, pass this in directly.
This bug caused this sanity test failure on some machines:
FAIL: test_devtool_modify_git (oeqa.selftest.devtool.DevtoolTests)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/meta/lib/oeqa/selftest/devtool.py", line 390, in test_devtool_modify_git
self.assertEqual(result.output.strip(), "", 'Created git repo is not clean')
AssertionError: '?? util/mkelfImage/patches/' != '' : Created git repo is not clean
since git apply would fail, it would then fall back to quilt
and the git tree would be left unclean.
[YOCTO #7911]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Aníbal Limón [Tue, 23 Jun 2015 16:49:54 +0000 (11:49 -0500)]
oe/utils.py: Add support for init/end helper functions in ThreadWorker.
Add init/end helper functions for ThreadWorker also pass ThreadWorker
as first argument to init/end/func functions this enables per-thread
storage handling.
classes/sstate.bbclass: Add thread_worker argument to checkstatus
function.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 23 Jun 2015 14:13:35 +0000 (15:13 +0100)]
apt-native: Drop obsolete symlinks
Apt no longer uses GLIBC_VER and LIBSTDCPP_VER variables nor appears
to need these odd symlinks. The variables expand to empty enties
which then create symlinks which loop back on themselves.
To fix, drop the obsolete code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 19 Jun 2015 10:25:12 +0000 (11:25 +0100)]
meta-environment: Ensure we append to the default TOOLCHAIN_NEED_CONFIGSITE_CACHE
The toolchain-scripts class was changed to assign to the variable using ??=
which allows users to override it. We therefore need to _append instead
of += to have the change take effect as intended.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 19 Jun 2015 10:24:39 +0000 (11:24 +0100)]
toolchain-scrpts: Fix sitecache issues with multilib
The use of TCLIBC in TOOLCHAIN_NEED_CONFIGSITE_CACHE is problematic
since a multilib may have both uclibc and glibc for different multilibs
yet switching between them doesn't change TCLIBC. This would result
in "lib32-glibc" being attempted when lib32 was actually uclibc.
The fix here is to use the virtual providers which bitbake switches
to point correctly at the right things.
This does mean we need to resolve virtual providers but we can do this using
sysroot-providers.
[YCOTO #7607]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 19 Jun 2015 09:09:40 +0000 (10:09 +0100)]
staging: Strip files in sysroot
Add functionality to strip binaries/libraries going into the sysroot. Whilst
this does fractionally slow down the build, it also significantly reduces the
size of the sstate cache files.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 18 Jun 2015 14:14:16 +0000 (15:14 +0100)]
meta: Add explict getVar param for (non) expansion
Rather than just use d.getVar(X), use the more explict d.getVar(X, False)
since at some point in the future, having the default of expansion would
be nice. This is the first step towards that.
This patch was mostly made using the command:
sed -e 's:\(getVar([^,()]*\)\s*):\1, False):g' -i `grep -ril getVar *`
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joshua Lock [Wed, 17 Jun 2015 08:33:18 +0000 (09:33 +0100)]
distutils-common-base: add to, don't set, FILES_${PN}
If we set FILES_${PN} and a recipe inherits other classes that
modify FILES_${PN} *before* distutils-common-base is included, any
changes to FILES_${PN} made by those classes are lost.
Instead, append the additional directories we want to include in
FILES_${PN}
Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk> Signed-off-by: Ross Burton <ross.burton@intel.com>
python3-ctypes: Fix cross compilation for arm targets
When cross compiling for arm targets ctypes compilation fails because
it uses _sysconfigdata from the HOST, this patches makes it use the
one from TARGET fixing compilation of this module
[YOCTO #7873]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Jonas Göransson <jonas.goransson@qmatic.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ed Bartosh [Wed, 17 Jun 2015 06:56:44 +0000 (09:56 +0300)]
wic: Integrated plugin docstrings into 'wic help plugins' output
Added mechanism to show docstrings of plugin classes as a part of
plugins help page.
For missing plugins the following warning message is shown:
<class '<plugin class spec>'> is missing docstring.
[YOCTO #7118]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ed Bartosh [Tue, 16 Jun 2015 04:56:25 +0000 (07:56 +0300)]
init-install: Properly delete partition table
Fixed deletion of the partition table by increasing
amount of sectors from 2(correct for msdos PT) to 35 as
GPT size is 34 sectors + 1 sector for protective MBR.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Ed Bartosh [Sun, 14 Jun 2015 20:05:28 +0000 (23:05 +0300)]
init-install: Specify partition name in parted command line
parted allows to use names for partitions if GPT partition table
is used on the device. msdos partitioning can have only partition
types: 'primary', 'logical' or 'extended'.
Used meaningful partition names in parted command line for GPT
partitioning.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Ed Bartosh [Sun, 14 Jun 2015 13:26:27 +0000 (16:26 +0300)]
init-install: Implement UUID support
Used partition UUID in kernel command line to specify root partition.
Searched root device by file system uuid in GRUB configuration.
Used partition UUID in /etc/fstab to specify swap partition.
Used filesystem UUID in /etc/fstab to specify boot partition.
[YOCTO #6101]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Ed Bartosh [Wed, 10 Jun 2015 14:49:32 +0000 (17:49 +0300)]
init-install-efi: Implement UUID support
Using UUID in favor of device names is more reliable as
UUID names are persistent.
Device names can change as the order of adding device nodes
is arbitrary. This sometimes results in device names switching
on each boot, which can cause system fail to boot.
Persistent naming solves these issues.
Used partition UUID in kernel command line to specify root partition.
Used partition UUID in /etc/fstab to specify swap partition.
Used filesystem UUID in /etc/fstab to specify boot partition.
[YOCTO #6101]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Philip Balister [Mon, 1 Jun 2015 20:17:21 +0000 (16:17 -0400)]
packagegroup-core-sdk.bb: Drop distcc from the core-sdk.
distcc has been used in the past to speed up native compile across
several machines. This is less an issue on modern embedded systems.
Also, improvements in sdk generation have reduced the need for on target
compile of large projects.
Since the distcc packages start a daemon at boot, drop it from the
packagegroup to avoid having some slight runtime impact on systems
installing an sdk.
Signed-off-by: Philip Balister <philip@balister.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
runqemu-internal: set mutual exclusiveness for serial and nographic options
Use "-nographic" option only if "serial" option is not
specified. Otherwise we get below error when
'runqemu <kernel_image> <rootfs_image> serial' is executed,
(snip)
QEMU 2.2.0 monitor - type 'help' for more information
(qemu) qemu-system-aarch64: -serial stdio: cannot use stdio by multiple
character devices
-- CUT --
Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
runqemu: fix MACHINE being detected as qemuarm for qemuarm64 kernel image
Basically, runqemu script autodetects MACHINE type based on the
kernel image name; if MACHINE name is not specified. Since 'qemuarm'
string is common in both qemuarm amnd qemuarm64 kernel image names, the
MACHINE type is considered as 'qemuarm' even when qemuarm64 kernel
image name is given in command line.
Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Kai Kang [Wed, 17 Jun 2015 01:32:47 +0000 (09:32 +0800)]
qt4-4.8.7: restore arm64 patches which are dropped by mistake
During upgrade qt4 from 4.8.6 to 4.8.7, four arm64 patches are removed.
But three of them are dropped by mistake that they are not merged by
upstream and still needed.
Restore them.
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Nathan Lynch [Mon, 15 Jun 2015 18:37:24 +0000 (13:37 -0500)]
lttng-modules: drop makefile patch
The lttng-modules Makefile allows us to specify the kernel we're
building against via the KERNELDIR variable on the build command line.
Use that and drop the patch (which tends to need updating whenever the
upstream Makefile changes).
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Patrick Ohly [Mon, 15 Jun 2015 16:05:13 +0000 (18:05 +0200)]
insane.bbclass: fix false negative in build-deps QA check
When a recipe called 'foobar-test' links against 'foobar' without
listing that in DEPENDS, the build-deps check misses that error
because it looks for 'foobar' in a package string containing (among
others) the 'foobar-test' name, leading to the incorrect conclusion
that the package is listed as dependency.
The 'packages' string needs to be split into individual package names
before the check. Doing that once directly after reading the value is
more efficient than splitting inside package_qa_check_rdepends() because
the caller also needs the individual components.
Also use a set to speed up the 'package in packages' check.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Mariano Lopez [Tue, 9 Jun 2015 12:46:48 +0000 (12:46 +0000)]
copyleft_filter.bbclass: Allow to filter on name
The archiver uses a license based filter to provide the source code.
This patch allows to search on name based on two new variables (COPYLEFT_PN_INCLUDE,
COPYLEFT_PN_EXCLUDE). Both variables are empty by default.
The filter by name has higher priority than the license filter.
[YOCTO # 6929]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Robert Yang [Thu, 11 Jun 2015 02:10:13 +0000 (19:10 -0700)]
libpcap: add a dummy PACKAGECONFIG for bluez5
The BLUEZ is default to bluez5, but there is only PACKAGECONFIG[bluez4],
no PACKAGECONFIG[bluez5], add a dummy PACKAGECONFIG for bluez5 to avoid
confusing the user, and avoid the warning.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Patrick Ohly [Mon, 15 Jun 2015 08:20:49 +0000 (10:20 +0200)]
logging.bbclass: avoid bashism in bbdebug()
Checking the bbdebug() debug level parameter with a regular
test expression only works in bash. Using tr to filter out
digits and then checking whether anything is left achieves
the same result and is more portable.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
distutils: regenerate pyc files after being modified by sed
py files are edited by sed and therefore *.pyc files are recreated on first boot, but if you have a read-only filesystem this is not possible. This patch creates pyc files directly after the py files are modified.
[YOCTO #7722]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Thomas Roos <roosesweb@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
for CVE-2015-1819 Enforce the reader to run in constant memory
Signed-off-by: Yue Tao <Yue.Tao@windriver.com> Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Armin Kuster [Sun, 14 Jun 2015 05:03:41 +0000 (22:03 -0700)]
tzcode-native: update to 2015e
merged inc back into recipe.
Changes affecting code
When displaying data, tzselect converts it to the current locale's
encoding if the iconv command works. (Problem reported by random832.)
tzselect no longer mishandles Dominica, fixing a bug introduced
in Release 2014f. (Problem reported by Owen Leibman.)
zic -l no longer fails when compiled with -DTZDEFAULT=\"/etc/localtime\".
This fixes a bug introduced in Release 2014f.
(Problem reported by Leonardo Chiquitto.)
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Tue, 16 Jun 2015 16:16:51 +0000 (17:16 +0100)]
devtool: deploy: fix preservation of symlinks and permissions/ownership
It turns out that scp can't be used to copy symlinks because it follows
them instead of copying them, and this is by design (since it emulates
rcp which also behaved this way); the unfortunate result is that
symlinks that point to valid files on the host translate into the host
file being copied to the target (yuck). The simplest alternative that
does not have this undesirable behaviour is to use tar and pipe it over
ssh.
At the same time, it would be even better if we properly reflect file
permissions and ownership on the target that have been established
within the pseudo environment. We can do this by executing the copy
process under pseudo, which turns out to be quite easy with access to
the pseudo environment set up by the build system.
Fixes [YOCTO #7868].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* It turns out that not all versions of the file command support the -E
option - the version in Ubuntu 14.04 doesn't support it for example.
This option is supposed to force file to return an error if the file
can't be opened - since we can't rely upon it then fall back to
looking at the output instead. (The results of this issue were simply
that we didn't notice if the file was executable and give a warning,
which tripped an oe-selftest failure - so it was minor.)
* If we receive an error there's not much point looking at the output to
see what type was returned because there wasn't one.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Markus Lehtonen [Wed, 27 May 2015 14:59:09 +0000 (17:59 +0300)]
devtool: use DevtoolError for error handling
Use DevtoolError exception more widely for handling error cases. This
exception is now caught in the main script and raising it can be used to
exit with an error. This hopefully simplifies error handling. The
change also makes exit codes more consistent, always returning '1' when
an error occurs.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Richard Purdie [Thu, 11 Jun 2015 22:06:56 +0000 (23:06 +0100)]
packagedata: Fix to ensure variables expand correctly
If we set unsuffixed variables here there is a chance they could clobber
override versions of that variable, e.g. DESCRIPTION could clobber
DESCRIPTION_<pkgname>. We therefore don't clobber for the unsuffixed
variable versions by using the parsing flag to setVar.
This becomes a problem with the modifications to bitbake to
have continual expansion of the datastore, its about the one place this
turns out to be problematic.
The parameter to setVar works with current bitbake even though
we don't have the new API since it gets swallowed by the logging code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
