Robert Yang [Thu, 28 Jan 2016 09:46:35 +0000 (01:46 -0800)]
gdb-common.inc: add PACKAGECONFIG for readline
When compile with readline 5.2:
completer.o: In function `gdb_display_match_list':
completer.c:(.text+0x1c13): undefined reference to `_rl_completion_prefix_display_length'
completer.c:(.text+0x1ce8): undefined reference to `rl_sort_completion_matches'
collect2: ld returned 1 exit status
The --without-system-readline will make it work.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Armin Kuster [Thu, 28 Jan 2016 02:17:59 +0000 (18:17 -0800)]
tzdata: update to 2016a
Changed LIC_CHKSUM_FILES to a new LICENSE file.
Add BSD-3-clause to licenses
Changes affecting future time stamps
America/Cayman will not observe daylight saving this year after all.
Revert our guess that it would. (Thanks to Matt Johnson.)
Asia/Chita switches from +0800 to +0900 on 2016-03-27 at 02:00.
(Thanks to Alexander Krivenyshev.)
Asia/Tehran now has DST predictions for the year 2038 and later,
to be March 21 00:00 to September 21 00:00. This is likely better
than predicting no DST, albeit off by a day every now and then.
Changes affecting past and future time stamps
America/Metlakatla switched from PST all year to AKST/AKDT on
2015-11-01 at 02:00. (Thanks to Steffen Thorsen.)
America/Santa_Isabel has been removed, and replaced with a
backward compatibility link to America/Tijuana. Its contents were
apparently based on a misreading of Mexican legislation.
Changes affecting past time stamps
Asia/Karachi's two transition times in 2002 were off by a minute.
(Thanks to Matt Johnson.)
Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Armin Kuster [Thu, 28 Jan 2016 02:17:58 +0000 (18:17 -0800)]
tzcode: update to 2016a
Change LIC_CHKSUM_FILES to License. Some files are BSD clause 3
Changes affecting build procedure
An installer can now combine leap seconds with use of the backzone file,
e.g., with 'make PACKRATDATA=backzone REDO=posix_right zones'.
The old 'make posix_packrat' rule is now marked as obsolescent.
(Thanks to Ian Abbott for an initial implementation.)
Changes affecting documentation and commentary
A new file LICENSE makes it easier to see that the code and data
are mostly public-domain. (Thanks to James Knight.) The three
non-public-domain files now use the current (3-clause) BSD license
instead of older versions of that license.
tz-link.htm mentions the BDE library (thanks to Andrew Paprocki),
CCTZ (thanks to Tim Parenti), TimeJones.com, and has a new section
on editing tz source files (with a mention of Sublime zoneinfo,
thanks to Gilmore Davidson).
The Theory and asia files now mention the 2015 book "The Global
Transformation of Time, 1870-1950", and cite a couple of reviews.
The America/Chicago entry now documents the informal use of US
central time in Fort Pierre, South Dakota. (Thanks to Rick
McDermid, Matt Johnson, and Steve Jones.)
Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Richard Purdie [Wed, 27 Jan 2016 23:30:30 +0000 (23:30 +0000)]
sstate: Improve handling of useradd dependencies
useradd has sstate [depends] for both do_package and do_populate_sysroot
yet the dependency validation code only covers do_package.
Add coverage of populate_sysroot, else the order inversion that [depends]
creates means unexpected installation of users of useradd.bbclass (e.g.
avahi do_populate_sysroot) in cases where it shouldn't be (e.g.
libnss-mdns -c packagedata).
The code needs to move above the other populate_sysroot intercept code
since there are specific cases we need to cover before that code.
The result of this change is more optimal installation of sstate objects
in common usage scenarios.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
Richard Purdie [Wed, 27 Jan 2016 23:29:36 +0000 (23:29 +0000)]
gtk-icon-utils-native: Drop problematic dependency
The setscene [depends] support is nasty with hidden side effects, in
particular hardcoding that the items mentioned basically always get
installed from sstate. Installing librsvg-native ends up pulling
in qemu-native and all kinds of things we don't want.
http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=e384d9ba0c4a3335575a766a82ed79201d794b11
was meant to resolve the reasons this dependency was present and
I suspect I simply forgot to remove it at the time. Remove it now
for much better sstate usage.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
Andre McCurdy [Wed, 27 Jan 2016 23:28:35 +0000 (15:28 -0800)]
glib-2.0: drop add-march-i486-into-CFLAGS-automatically.patch
The reasoning behind this patch isn't clear. ${CC} should always
contain appropriate -march flags. If the build is misconfigured
somehow (or someone is trying to build for i386) then we want the
configure scipt to generate an error, not to try to quietly try to
fix it (adding -march=i486 to CFLAGS is potentially going to cause
more problems than it solves).
Since this patch is unlikely to ever be merged upstream and it's not
helpful in any typical OE build, drop it rather than maintaining it.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Fixes "./libtool: No such file or directory" warnings when running
configure:
| ...
| checking for dlsym in -ldl... yes
| ../glib-2.46.2/configure: line 25481: ./libtool: No such file or directory
| checking for RTLD_GLOBAL brokenness... (cached) yes
| ...
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Enrico Jorns [Tue, 12 Jan 2016 12:55:43 +0000 (13:55 +0100)]
systemd: fix systemctl enable script for template units
The systemctl script supports enabling template units by evaluating
"DefaultInstance" parameter. Unfortunately, due to the sed replacement
mechanism, all escaping used in the DefaultInstance string, e.g. for
giving path names with dashes, is expanded too early.
Thus for
DefaultInstance=-path\x2dwith\x2ddashes
a path unit `foobar@.path` will be installed with a symlink named
foobar@-path-with-dashed.path
that is interpreted as the path `/path/with/dashes` instead of the
intended path nam `/path-with-dashes`.
To fix this behavior additional escaping of the backslashes in the
`DefaultInstance` string is required so that sed does not expand the
escaped characters.
Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Ross Burton <ross.burton@intel.com>
Add bash-completion.bbclass which will package bash completion files in
a subpackage ${PN}-bash-completion. Use of this class will ensure
consitent handling of bash completions across recipes.
Signed-off-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
The reasons for the switch are here:
http://lists.openembedded.org/pipermail/openembedded-core/2015-July/107091.html
http://lists.openembedded.org/pipermail/openembedded-core/2016-January/116007.html
Changes made to libav recipe:
- drop libav-fix-CVE-2014-9676.patch, the fix is available upstream
- merge .inc into .bb, only one upstream version (latest one) is provided
- drop separate libpostproc recipe, the library is provided directly
from ffmpeg source tree
- drop ARM tweaks; they date to classic-OE, need to be retested against the
new code and probably haven't been relevant for a long time
- drop PACKAGECONFIG options that are no longer provided upstream
- drop build and packaging tweaks that don't seem to do anything useful
and also date back to classic OE; if you run into issues, please report
- explicitly enable PIC and disable stripping of binaries
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
lib/oe/patch: Make GitApplyTree._applypatch() support read-only .git/hooks
Rather than modifying files in .git/hooks, which can be read-only
(e.g., if it is a link to a directory in /usr/share), move away the
entire .git/hooks directory temporarily.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
gcc: fix hidden weak symbols by removing buggy gcc patch
We are noticing the presence of the following patch in various
openembedded gcc versions:
0024-PR-target-32219.patch
However, contrarily to its "Backport" status, that patch is
not upstream in gcc, and it breaks handling of start/stop automatic
weak hidden symbols we use in lttng-ust.
We are only experiencing problems on the various openembedded
compilers, but on no other distro (with same compiler versions),
which led us to suspect a buggy distro-specific gcc patch.
We've been testing with openembedded gcc-4.9.2-r0. Rebuilding the gcc
compiler with this patch removed fixes the lttng-ust issue.
Andre McCurdy [Wed, 27 Jan 2016 20:58:51 +0000 (12:58 -0800)]
qemu.bbclass: clarify QEMU_EXTRAOPTIONS
QEMU_EXTRAOPTIONS is a way to add PACKAGE_ARCH specific options to the
qemu_run_binary qemu commandline. The base QEMU_EXTRAOPTIONS variable
(ie without a PACKAGE_ARCH suffix) is not used, so defining it, either
directly or via an over-ride has no effect.
Although previously an over-ride for _armv7a was used, it did nothing
for most armv7a builds, which typically use PACKAGE_ARCH values such
as "cortexa9hf-neon". In practice this worked OK since without a -cpu
option, qemu-arm will default to emulating a CPU which supports all
required architecture levels.
qemu-arm (v2.5.0) with no -cpu option has been confirmed to
successfully run binaries built for armv7ve.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Markus Lehtonen [Wed, 27 Jan 2016 12:50:53 +0000 (14:50 +0200)]
buildhistory: fix the check for existence of a git repo
Previously, in order to determine the existence of an already
initialized Git repository we checked if a directory named '.git' was
present in the buildhistory dir. However, e.g. in the case of git
submodules '.git' may also be a regular file referencing some other
location which was causing unwanted behavior. This patch changes
buildhistory.bbclass to check for any file named '.git' which fixes
these problems.
[YOCTO #8911]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Joshua Lock [Wed, 27 Jan 2016 11:24:00 +0000 (11:24 +0000)]
connman: tidy up connman-conf usage
connman-conf is now a systemd oneshot and therefore doesn't need to
be sed'ed in to the ConnMan service file.
Note: this doesn't affect sysvinit where we provide a ConnMan
init script which checks for the presence of the wired-networking
script and, if it exists, executes it as part of the connman init.
[YOCTO #8399]
Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk> Signed-off-by: Ross Burton <ross.burton@intel.com>
Joshua Lock [Wed, 27 Jan 2016 11:23:59 +0000 (11:23 +0000)]
connman-conf: convert to systemd oneshot
Install a oneshot unit file that is started before ConnMan to
configure a wired network inteface with the wired-setup script,
rather than requiring this script to be manually run some how.
Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk> Signed-off-by: Ross Burton <ross.burton@intel.com>
Aníbal Limón [Mon, 25 Jan 2016 23:29:37 +0000 (17:29 -0600)]
ptest-runner: Add ptest-runner_2.0 recipe.
The ptest-runner 2.0 is C written program for run ptests of
Yocto/Openembedded, is fully compatible with previous version of
ptest-runner that was a shell script that runs ptests sequencially.
The mainly reason for the new ptest-runner in C is because is designed
for run in tiny systems also the old shell script version have problems
when certain ptest hang it becomes blocked indefinitely.
Now the ptest-runner 2.0 support the next features:
- Specify the directory for search ptests.
- List available ptests.
- Specify the timeout for avoid blocking indefinetly.
- Only run certain ptests.
Proposed features:
- Adds support for per ptest output file.
- Adds support for run ptests in parallel (review possible
colisions in ptests).
[YOCTO #8021]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Khem Raj [Sat, 26 Dec 2015 20:01:44 +0000 (20:01 +0000)]
elfutils: Fix build with uclibc/musl
Remove mempcpy patch its already in uclibc now
refresh libargp patch to match latest elfutils
Add ALLOW_EMPTY for musl
core-image-cmdline-full asks for elfutils package to be added to package
it has all eu-* tools but we dont build them on musl. nevertheless lets
satisfy the dependency so image can build for musl
Build libdw,libasm,libebl along with libelf
enhance the musl portability patch to compile every other library
except the eu-* tools
Fix build on aarch64/musl issues
Header inclusion ends up with duplicate definitions of iovec struct
since uclibc defines the same in usersapce, we have been depending upong
including the kernel header on aarch64, using sys/uio.h is the right
approach
Fix x86 build warning seen on musl
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Khem Raj [Tue, 12 Jan 2016 23:43:13 +0000 (23:43 +0000)]
grub: Backport fix for largefile detection/use
This is inspired by musl porting, where grub's configure is enabling
largefile support based on glibc versions, instead an upstream patch
turns it into autoconf check
Update git version recipe
arm platforms use this recipe to provide grub and it needed fixes from
upstream so upgrade to latest tip of git and forward port patches as
well as drop the ones already applied upstream
python hard-codes the encoding of many locales; for instance, en_US is
always assumed to be ISO-8859-1, regardless of the actual encoding of
the en_US locale on the system. cf
https://hg.python.org/cpython/file/7841e9b614eb/Lib/locale.py#l1049,
getdefaultlocale(), etc. This code appears to date back to python 2.0.
The source of this hard-coding is Xorg's locale.alias but is ultimately
justified by glibc's SUPPORTED.
This causes problems on OE, because any locale lacking an explicit
encoding suffix (e.g. en_US) is UTF-8. It has been this way from the
beginning (svn r1). That is not a bug, per se -- no specification
prohibits this AFAIK. But it seems to be at odds with virtually every
other glibc-based distribution in existence. To avoid needlessly
aggravating hidden bugs that nobody else might hit, it makes sense to
disable this behavior such that locales are named precisely as specified
by SUPPORTED.
I suppose that reasonable minds may disagree on whether or not the
current behavior is prudent; at the very least, this is likely to break
IMAGE_LINGUAS settings. So let's create a new distro variable
LOCALE_UTF8_IS_DEFAULT to allow either behavior. Set it to 0 and all
your locales get named exactly like they are in SUPPORTED. Leave it at 1
to preserve current OE locale naming conventions.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Since it is now possible to concatenate multiple regular expressions
into BBMASK, there is no longer any real reason to limit it to be
specified only in local.conf.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Thu, 21 Jan 2016 23:14:40 +0000 (15:14 -0800)]
bsd-headers: Fix LICENCE and dev package RDEPENDS
Clear out runtime deps for dev package, since PN is empty packager will
try to resolve to PN when building images with musl and error out since
PN is deleted as its empty
musl-dev explicitly depends upon it so it will get pulled into build
in right order
Khem Raj [Wed, 20 Jan 2016 19:51:01 +0000 (11:51 -0800)]
ltp: Add rdep on ldd
Fixes runtime errors e.g.
/opt/ltp/ver_linux: line 50: ldd: command not found
awk: cmd. line:2: (FILENAME=- FNR=1) fatal: attempt to access field -1
/opt/ltp/ver_linux: line 54: ldd: command not found
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Tue, 26 Jan 2016 00:20:24 +0000 (13:20 +1300)]
gen-lockedsig-cache: fix bad destination path joining
When copying the sstate-cache into the extensible SDK, if the source
path had a trailing / and the destination path did not, there would be a
missing / between the path and the subdirectory name, and you'd end up
with subdirectories like "sstate-cacheCentOS-6.7". There are functions
in os.path for this sort of thing so let's just use them and avoid the
problem.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
bmouring@ni.com [Mon, 25 Jan 2016 14:49:20 +0000 (08:49 -0600)]
avahi: Add patch to fix Win10 mDNS issues
Windows 10 will respond to mDNS messages when it really shouldn't,
resulting in a lot of logging. Pulling the change from avahi upstream.
This will be fixed in avahi 0.6.32
Robert Yang [Mon, 25 Jan 2016 08:45:59 +0000 (00:45 -0800)]
image.bbclass: check INITRAMFS_MAXSIZE
Usually, the initramfs' maxsize can be 1/2 of ram size since modern
kernel uses tmpfs as initramfs by dafault, and tmpfs allocates 1/2 of
ram by default at boot time, which will be used to locate the initramfs.
Set INITRAMFS_MAXSIZE to 131072K (128M) by default (ram 256M), the
initramfs is small usually, for example, core-image-minimal-initramfs is
about 21M (uncompressed, 17M * 1.3) by default, but if the user add a
lot pkgs to initramfs, we can error and stop to let the user know ealier
rather than fail to boot (e.g., OOM-killer) at boot time.
Please see the bug for more info:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=5963
[YOCTO #5963]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Roy Li [Mon, 25 Jan 2016 03:04:33 +0000 (11:04 +0800)]
systemd: make TEST_DIR configurable
1. make TEST_DIR configurable, and configure it to ptest dir, since
the *.service for test are installed into ptest dir.
2. always follow symbolic links in SOURCE when copy test files
to install dir, since some *.service under test dir are linked to
../unit/*.service which are not installed into ptest dir
Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Derek Straka [Sun, 24 Jan 2016 13:13:04 +0000 (08:13 -0500)]
bind: update to 9.10.3-P3
Addresses CVE-2015-8704 and CVE-2015-8705
CVE-2015-8704
Allows remote authenticated users to cause a denial of service via a malformed Address Prefix List record
CVE-2015-8705:
When debug loggin is enabled, allows remote attackers to cause a denial of service or have possibly unspecified impact via OPT data or ECS option
Ross Burton [Mon, 25 Jan 2016 15:08:23 +0000 (15:08 +0000)]
uninative: handle UNINATIVE_URL being file:///
If the local fetcher is used then files are not actually fetched into DL_DIR, so
check if this happened and if required add a symlink to the real file.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Markus Lehtonen [Mon, 25 Jan 2016 12:21:34 +0000 (14:21 +0200)]
meta/lib: new module for handling GPG signing
Add a new Python module (oe.gpg_sign) for handling GPG signing
operations, i.e. currently package and package feed signing. The purpose
is to be able to more easily support various signing backends and to be
able to centralise signing functionality into one place (e.g. package
signing and sstate signing). Currently, only local signing with gpg is
implemented.
[YOCTO #8755]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Tue, 26 Jan 2016 02:53:54 +0000 (15:53 +1300)]
devtool: add configure-help subcommand
When you need to set EXTRA_OECONF for a recipe, you need to know what
options the configure script actually supports; the configure script
however is only accessible from within a devshell and (at least in the
case of autotooled software fetched from an SCM repository) may not
actually exist until do_configure has run. Thus, provide a "devtool
configure-help" subcommand that runs the configure script for a recipe
with --help and shows you the output through a pager (e.g. less),
prefaced by a header describing the current options being specified.
There is basic support for autotools, cmake and bare configure scripts.
The cmake support is a little hacky since cmake doesn't really have a
concise help option that lists user-defined knobs (without actually
running through the configure process), however that being a design
feature of cmake there's not much I can think of to do about that at
the moment.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Tue, 26 Jan 2016 02:53:57 +0000 (15:53 +1300)]
devtool: properly handle bb.build.FuncFailed when extracting source
When we run the tasks required to extract the source for a recipe (e.g.
within "devtool modify" or "devtool extract") if one of those tasks
fails you get a bb.build.FuncFailed exception; handle this properly so
you don't see a traceback.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Tue, 26 Jan 2016 02:53:56 +0000 (15:53 +1300)]
devtool: add: warn if modified recipe found in attic directory
If a recipe generated by "devtool add" has been modified since then when
you run "devtool reset", it will be moved into the "attic" subdirectory
of the workspace in case those modifications need to be preserved. It
seems natural that if those modifications were worth preserving we
should warn the user if such a file exists when they run "devtool add"
to create the same recipe again, so they can pick up where they left off
if they want to.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Tue, 26 Jan 2016 02:53:55 +0000 (15:53 +1300)]
devtool: build-image: allow specifying packages to add to image
Provide an option to devtool build-image to specify the list of packages
instead of taking the list of packages produced by recipes in the
workspace. Sometimes you don't want all of these packages; other times
you want to add more.
This is the most immediate fix for [YOCTO #8855], though it is a little
crude so I would like to provide better means of customising the image
contents later.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 26 Jan 2016 18:02:21 +0000 (18:02 +0000)]
image: Don't create tasks with '.' in the name
Similarly to "-", "." doesn't work well in task names but is used in
some real world image classes. Work around this with some replacements
for now to unbreak layers.
(Issues don't show themselves until runtime, e.g. with --dry-run)
Tested-By: Otavio Salvador <otavio.salvador@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 25 Jan 2016 15:07:34 +0000 (15:07 +0000)]
kernel: Clean DEPLOYDIR before do_deploy runs
If we don't do this, the deploy sstate object contains an every
increasing number of modules tarballs and kernel images, one per
execution of "-c deploy -f".
Cleaning the directory before we start makes things much tidier.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 25 Jan 2016 15:05:18 +0000 (15:05 +0000)]
libtirpc: Drop unneeded xz-native dependency
xz-native is needed to decompress the sources but DEPENDS isn't correct
for this, its needed at do_unpack time. base.bbclass already handles
this correctly so drop the unneeded dependency.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
