Remove backported 0001-Use-correct-include-dir-with-minitasn.patch and
CVE-2016-7444.patch (which still applied silently and incorrectly:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=10450).
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
buildhistory: fix latest_srcrev in the common case
buildhistory was writing srcrevs.values() as SRCREV when only one
srcrev/branch exists. This returns a view of the dictionary values in python
3, and used to return a list in python 2, neither of which is an appropriate
value for SRCREV. It was resulting in latest_srcrev files like this:
Olaf Mandel [Mon, 17 Oct 2016 08:16:28 +0000 (08:16 +0000)]
combo-layer: handle ambiguous git arguments
If a branch/src-repository has the same name as a file/directory, git
since 1.4.0(?) gives an error like the one below:
ambiguous argument 'bitbake': both revision and filename
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
Add two dashes to make the intent clear.
Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Olaf Mandel [Mon, 17 Oct 2016 08:16:27 +0000 (08:16 +0000)]
combo-layer: fix crashes on wrong tempfile usage
When calling tempfile.NamedTemporaryFile().write(str()), at least on
Python 3.4.2 this fails with this error:
TypeError: 'str' does not support the buffer interface
Change the file-mode for all such files from binary to text mode.
Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Olaf Mandel [Fri, 21 Oct 2016 09:24:28 +0000 (09:24 +0000)]
Remove $COREBASE/LICENSE from LIC_FILES_CHKSUM
Several recipes reference the LICENSE file in their LIC_FILES_CHKSUM
variable as ${COREBASE}/LICENSE. This forces distribution providers to
keep this file verbatim or to overload the affected recipes. The section
"Moving to the Yocto Project 1.6 Release" in the Yocto manual suggests
removing the LICENSE file where possible.
Remove LICENSE in cases where COPYING.MIT is also given and replace
LICENSE with COPYING.MIT if the former was the only entry. All modified
recipes specify LICENSE = "MIT" and none of the in-tree files specify a
different license either.
As the packages do not change (the license files are not contained in
them), do not increase PR.
Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Tue, 18 Oct 2016 02:51:16 +0000 (15:51 +1300)]
devtool: runqemu: work around runqemu script path assumption
The new runqemu script assumes that if OECORE_NATIVE_SYSROOT is set then
it shouldn't try to run bitbake to find out the values of various
variables such as DEPLOY_DIR_IMAGE; this assumption is incorrect for the
extensible SDK. To work around this, clear OECORE_NATIVE_SYSROOT in the
environment when running runqemu.
Fixes [YOCTO #10447].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mikko Ylinen [Wed, 19 Oct 2016 06:34:00 +0000 (09:34 +0300)]
buildstats: check IMAGE_ROOTFS exists before checking its size
After 0d6b7276003f1afabc6de683f663540327d52bdc, the exceptions are
correctly checked if the rootfs size check fails. In case of a
failure a build error is triggered.
However, there are cases where this is known to fail (e.g.,
with meta-swupd the rootfs for swupd images is other than IMAGE_ROOTFS).
Because of that, check IMAGE_ROOTFS exists before trying to get the
size of it. Also, in case of any error catched as err, simply print
out a warning.
Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Juro Bystricky [Thu, 20 Oct 2016 16:54:23 +0000 (09:54 -0700)]
build-appliance-image: add /sbin to PATH
runqemu script fails with an error when executed in Build Appliance.
Typical use case:
$ bitbake core-image-minimal
$ runqemu qemux86
Observed error:
runqemu - ERROR - In order for this script to dynamically infer paths
...snip...
runqemu-ifup, runqemu-ifdown or ip not found
The error is caused by the fact that "ip" is located in /sbin, however /sbin is
not in user's ("builder") PATH. To fix this we add /sbin to PATH.
The simplest place to do this is in user's .bashrc.
[YOCTO#10434]
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Bruce Ashfield [Fri, 21 Oct 2016 15:35:31 +0000 (11:35 -0400)]
linux-yocto/4.8: update to v4.8.3
Integrating the korg -stable release
One commit of note is the fix for CVE-2016-5195 (http://dirtycow.ninja/):
mm: remove gup_flags FOLL_WRITE games from __get_user_pages()
The remaining changes are covered by the following shortlog export:
mm: remove gup_flags FOLL_WRITE games from __get_user_pages()
Make __xfs_xattr_put_listen preperly report errors.
scsi: configure runtime pm before calling device_add in scsi_add_host_with_dma
v4l: rcar-fcp: Don't force users to check for disabled FCP support
Linux 4.8.2
tpm_crb: fix crb_req_canceled behavior
tpm: fix a race condition in tpm2_unseal_trusted()
ima: use file_dentry()
Bluetooth: Add a new 04ca:3011 QCA_ROME device
ARM: cpuidle: Fix error return code
ARM: dts: MSM8660 remove flags from SPMI/MPP IRQs
ARM: dts: MSM8064 remove flags from SPMI/MPP IRQs
ARM: dts: mvebu: armada-390: add missing compatibility string and bracket
ARM: fix delays
x86/dumpstack: Fix x86_32 kernel_stack_pointer() previous stack access
x86/mm/pkeys: Do not skip PKRU register if debug registers are not used
arch/x86: Handle non enumerated CPU after physical hotplug
x86/apic: Get rid of apic_version[] array
x86/platform/intel-mid: Keep SRAM powered on at boot
x86/platform/intel-mid: Add Intel Penwell to ID table
x86/cpu: Rename Merrifield2 to Moorefield
x86/pkeys: Make protection keys an "eager" feature
x86/irq: Prevent force migration of irqs which are not in the vector domain
x86/boot: Fix kdump, cleanup aborted E820_PRAM max_pfn manipulation
arm64: fix dump_backtrace/unwind_frame with NULL tsk
KVM: PPC: BookE: Fix a sanity check
KVM: arm/arm64: vgic: Don't flush/sync without a working vgic
KVM: arm64: Require in-kernel irqchip for PMU support
KVM: MIPS: Drop other CPU ASIDs on guest MMU changes
KVM: PPC: Book3s PR: Allow access to unprivileged MMCR2 register
xen/x86: Update topology map for PV VCPUs
mfd: wm8350-i2c: Make sure the i2c regmap functions are compiled
mfd: 88pm80x: Double shifting bug in suspend/resume
mfd: atmel-hlcdc: Do not sleep in atomic context
mfd: rtsx_usb: Avoid setting ucr->current_sg.status
ALSA: usb-line6: use the same declaration as definition in header for MIDI manufacturer ID
ALSA: usb-audio: Extend DragonFly dB scale quirk to cover other variants
ALSA: ali5451: Fix out-of-bound position reporting
phy: sun4i-usb: Use spinlock to guard phyctl register access
usb: dwc3: fix Clear Stall EP command failure
timekeeping: Fix __ktime_get_fast_ns() regression
usb: storage: fix runtime pm issue in usb_stor_probe2
Linux 4.8.1
ALSA: hda - Add the top speaker pin config for HP Spectre x360
ALSA: hda - Fix headset mic detection problem for several Dell laptops
ALSA: hda - Adding one more ALC255 pin definition for headset problem
Revert "usbtmc: convert to devm_kzalloc"
USB: serial: cp210x: Add ID for a Juniper console
usb: usbip: vudc: fix left shift overflow
Staging: fbtft: Fix bug in fbtft-core
usb: misc: legousbtower: Fix NULL pointer deference
Using BUG_ON() as an assert() is _never_ acceptable
arm64: debug: avoid resetting stepping state machine when TIF_SINGLESTEP
Using BUG_ON() as an assert() is _never_ acceptable
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Wed, 19 Oct 2016 01:08:18 +0000 (21:08 -0400)]
kern-tools: make patches with shell-unsafe characters valid
If a patch contains characters like ; or (), it can cause processing
errors in the patch queue.
We had previously fixed this issue by renaming the patches to not
include invalid characters, but with this change to the kern tools
that ensures patch names are wrapped in quotes, we avoid shell
processing and hence they are valid.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Merging the following patches into 4.4 and 4.8 to remove kernel
configuration warnings:
bbaf01752b01 meta-yocto-bsp: beaglebone: remove the stale kernel options 552a83790b17 features: Fix configcheck warnings in features used by intel-quark BSPs c33d9c2c575f features: Fix configcheck warnings in features used by intel-core* BSPs
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jussi Kukkonen [Fri, 14 Oct 2016 18:38:40 +0000 (21:38 +0300)]
libxml2: Make tests non-executable
The XML W3C conformance test suite contains thousands of xml files all
marked executable. We dutifully try to strip all these files of debug
info in do_package.
"chmod -x" improves build time by ~40 seconds.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Markus Lehtonen [Fri, 14 Oct 2016 10:41:26 +0000 (13:41 +0300)]
rpm: prevent race in tempdir creation
This patch fixes an extramely rare race condition in creation of rpmdb
temporary directory. The "rpmdb-more-verbose-error-logging" patch is
still left in place, just for the case.
[YOCTO #9416]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
$ bitbake linux-yocto
ERROR: linux-yocto-4.8+gitAUTOINC+03bf3dd731_674818dad5-r0 do_package_qa: QA Issue: Bit size did not match (32 to 64) linux-yocto on
/work/qemumips64-poky-linux/linux-yocto/4.8+gitAUTOINC+03bf3dd731_674818dad5-r0/packages-split/kernel-module-parport/lib/modules/4.8.0-yocto-standard/kernel/drivers/parport/parport.ko [arch]
The mips64-n32 works since it would set ABIEXTENSION to "n32" so that
TARGET_OS is linux-gnun32, and it will skip the check, but "mips64-o32"
doesn't set ABIEXTENSION to "o32", "n32" or "32", so the error happend.
Skip the check if mips64.*32 matches DEFAULTTUNE can fix the problem.
Another way to fix the problem is define ABIEXTENSION to "o32" or "32"
for mips64-o32, but that may make things confused since "o32" is purely
32 bit.
[YOCTO #10305]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
$ bitbake linux-yocto
ERROR: OE-core's config sanity checker detected a potential misconfiguration.
Either fix the cause of this error or at your own risk disable the checker (see sanity.conf).
Following is the list of potential problems / advisories:
Error, the PACKAGE_ARCHS variable contains duplicates. The following archs are listed more than once: mips64-o32
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Jackie Huang [Fri, 14 Oct 2016 00:50:11 +0000 (08:50 +0800)]
ppp: fix building with linux-4.8
Fix a build error when using the linux-4.8 headers that results in:
In file included from pppoe.h:87:0,
from plugin.c:29:
../usr/include/netinet/in.h:211:8: note: originally defined here
struct in6_addr
^~~~~~~~
In file included from ../usr/include/linux/if_pppol2tp.h:20:0,
from ../usr/include/linux/if_pppox.h:26,
from plugin.c:52:
../usr/include/linux/in6.h:49:8: error: redefinition of 'struct sockaddr_in6'
struct sockaddr_in6 {
^~~~~~~~~~~~
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Fri, 14 Oct 2016 12:57:51 +0000 (13:57 +0100)]
populate_sdk_ext: explicitly set DL_DIR
The eSDK generation assumes that DL_DIR is downloads/ under the build directory,
and puts files such as a freshly buily uninative tarball in there expecting
bitbake will find it later.
Whilst ${TOPDIR}/downloads/ is in fact the default value for DL_DIR in
bitbake.conf, and any instances of DL_DIR are removed from the original
local.conf, there is still the possibility that other layers could contain a
site.conf that assigns DL_DIR.
If this happens the errors are quite mysterious as it fails to find the
uninative tarball and so the hashes all change, and eSDK building fails.
Ensure that this cannot happen by explicitly assigning the DL_DIR that we
require, instead of assuming that the default value will be used.
[ YOCTO #10439 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Jianxun Zhang [Thu, 13 Oct 2016 20:16:34 +0000 (13:16 -0700)]
sqlite3: Revert ad601c7962 from 3.14.1 amalgamation package
It turns out this change between 3.12.2 and 3.13 introduces
a 2% increase of build time based on statistic data in
bz10367.
The added patch is forged by diffing the new sqlite3.c
generated from reverting the change in raw source of sqlite3
project, and then manually migrate the delta to a sqlite3.c
from the 3.14.1 tarball package because what recipes reference
is actually a generated C code (amalgamation) release package
and we cannot apply the real change to 3.14.1 cleanly due to
so many changes happened.
Fixes [YOCTO #10367]
Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Andre McCurdy [Thu, 13 Oct 2016 18:49:33 +0000 (11:49 -0700)]
linux-yocto.inc: ensure do_kernel_link_images runs before do_strip
If the do_kernel_link_images task is enabled, then it needs to run
before do_strip. The addtask statement for do_strip makes that
explicit. For consistency, make it explicit in the addtask statement
for do_kernel_link_images too.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Martin Jansa [Wed, 12 Oct 2016 12:06:12 +0000 (14:06 +0200)]
live-vm-common.bbclass: Allow to use different kernel image than KERNEL_IMAGETYPE for /vmlinuz
* syslinux config hardcodes kernel image as /vmlinuz add warning message
when the selected image doesn't exist and allow to select different image
with VM_DEFAULT_KERNEL variable (qemuboot.bbclass is using QB_DEFAULT_KERNEL)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
To produce certain types of images wic uses do_bootimg results
to assemble final image. For example, it copies BOOT/EFI directory
produced by do_bootimg to boot partition for every EFI image.
The tricky part of this is that do_bootimg task is not always run,
so we can't always make do_image_wic depend on do_bootimg. We only
need to do it if do_bootimg present in task graph.
Thank to Cristopher Larson for this fix.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Robert Yang [Thu, 22 Sep 2016 09:36:55 +0000 (02:36 -0700)]
xcb-proto: create .pyc files for python2
Its Makefile's do_install creates .pyc files for python3, now also
create them for python2 so that they will be recorded by manifest, and
can be cleaned correctly.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Robert Yang [Wed, 12 Oct 2016 06:31:29 +0000 (23:31 -0700)]
source-highlight: use with-boost-libdir
Without with-boost-libdir, it checks lib64 libx32 lib lib64 in
sysroot/usr/ and set it as boost lib path if it exist, this is
unreliable when build with multilib.
Fixed when switch baselib from lib64 to lib, for example, when we build
qemux86-64 + multilib setting, the baselib is lib64, and when disable
multilib, it would be lib, then we may see the error when
do_configure since lib64 may exist during build source-highlight:
configure: error: Could not find a version of the Boost::Regex library!
Juro Bystricky [Tue, 11 Oct 2016 16:56:24 +0000 (09:56 -0700)]
insane.bbclass: Additional "mips" and "mipsel" machine definitions
Add "mips" and "mipsel" to "machdata" table.
Although there is a way to add entries to the "machdata" table
from a BSP without modifying the insane.bbclass directly, MIPS is
already supported in poky and as such the relevant entries should be
present in insane.bbclass.
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Tue, 11 Oct 2016 12:30:42 +0000 (13:30 +0100)]
cmake: improve CMAKE_SYSTEM_PROCESSOR assignment in nativesdk
The previous string manipulations would result in the wrong string being used
for machines such as intel-corei7-64 as the sysroot was split at the first
hyphen (so would result in corei7 instead of corei7-64).
Change the logic so that it looks for processor-distro-os and uses the whole of
the processor field.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Mon, 10 Oct 2016 11:41:34 +0000 (12:41 +0100)]
cmake: also set CMAKE_FIND_ROOT_PATH_MODE_PACKAGE
The other CMAKE_FIND_ROOT_PATH_MODE_* variables were already set to ONLY, but
PACKAGE was left out. Fix this so that cmake doesn't look on the host for cmake
modules when it should only be looking in the target sysroot.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Previous attempts to constrain execution of `resize` to only TTYs did
not properly handle situations when `tty` would return the string "not a
tty". The symptom is "/etc/profile: line 34: test: too many arguments".
Fix this by utilizing the exit code of `tty`. Also use `case` instead of
`cut` to eliminate a subshell.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Thu, 13 Oct 2016 19:36:35 +0000 (20:36 +0100)]
pixbufcache: handle gdk-pixbuf not being present
It's possible - albeit unlikely - that gdk-pixbuf isn't present in the sysroot
when a recipe inheriting this class is and the sysroot is finalised.
One example would be if the sstate archive has librsvg but not gdk-pixbuf:
librsvg will be extracted from the sstate but gdk-pixbuf will be built to "fill
in the gap". In this situation the setscene completion hook installed by
pixbufcache.bbclass will attempt to execute gdk-pixbuf-query-loaders, but that
binary hasn't been installed by gdk-pixbuf yet.
Also add gdk-pixbuf-native to DEPENDS in native builds to ensure that the
binaries we expect will be present, as it's possible to build loaders without
linking to GdkPixbuf.
[ YOCTO #10420 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Joshua Lock [Wed, 12 Oct 2016 20:46:41 +0000 (21:46 +0100)]
Remove RM_OLD_IMAGE, it's no longer useful
Since the move to put image deployment under sstate control in d54339d4b1a7e884de636f6325ca60409ebd95ff old images are automatically
removed before a new image is deployed (the default behaviour of the
sstate logic).
RM_OLD_IMAGE is therefore no longer required to provide this
behaviour, remove the variable and its users.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Tue, 11 Oct 2016 21:33:47 +0000 (10:33 +1300)]
classes/externalsrc: re-run do_configure when configure files change
If the user modifies files such as CMakeLists.txt in the case of cmake,
we want do_configure to re-run so that those changes can take effect. In
order to accomplish that, have a variable CONFIGURE_FILES which
specifies a list of files that will be put into do_configure's checksum
(either full paths, or just filenames which will be searched for in the
entire source tree). CONFIGURE_FILES then just needs to be set
appropriately depending on what do_configure is doing; for now I've set
this for autotools and cmake which are the most common cases.
Fixes [YOCTO #7617].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Todor Minchev [Tue, 4 Oct 2016 15:47:11 +0000 (08:47 -0700)]
sdk-installer: Fix unclear SDK installer message
When the host and the SDK architectures are incompatible the SDK
installer outputs an incomplete error message "Error: Installation
machine not supported!". This commit adds a more verbose error
message e.g "Error: Incompatible SDK installer! Your host is i686
and this SDK was built for x86_64 hosts."
Signed-off-by: Todor Minchev <todor.minchev@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Markus Lehtonen [Tue, 11 Oct 2016 12:43:29 +0000 (15:43 +0300)]
sysklogd and busybox: ignore return code from init script stop
The init script will return '1' if we try to stop the service and it is
not currently running. The prerm scriptlet must not fail because of this
because it will cause package deinstallation of upgrade fail if opkg
package manager is used.
[YOCTO #10299]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to ignore the return code from the init script 'stop' command in
the preinst and prerm scriptlets. Otherwise package upgrade or
deinstallation (at least when opkg is used) is likely to fail if the
daemon is not running. That is because an init script possibly returns
'1' if you try to stop a service that is not running which, in turn,
causes the scriptlet to fail which, in turn, causes the package
(de-)installation to fail.
[YOCTO #10299]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Tue, 11 Oct 2016 12:19:44 +0000 (13:19 +0100)]
insane: display names instead of ELF machine numbers
The 'arch' QA test currently simply outputs the ELF machine field as a number
which isn't helpful. Display this as a human-readable name to make it clearer
to the user what the problem is.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jussi Kukkonen [Tue, 11 Oct 2016 10:58:02 +0000 (13:58 +0300)]
vte: Build without vala by default
vala.bbclass DEPENDS on vala and vala-native: Drop the inherit so
that these dependencies can be added on-demand based on vte
PACKAGECONFIG. Add relevant items from vala class into the recipe.
Add copy of vapigen.m4 so building without vala actually succeeds.
Make building without vala the default PACKAGECONFIG.
Fixes [YOCTO #10386].
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold [Mon, 10 Oct 2016 18:32:05 +0000 (11:32 -0700)]
archiver: fix gcc-source handling
The source archiver was not handling the gcc-source target correctly, since it uses the
work-shared directory, we don't want to unpack and patch it twice, just as the comments
say, but the code was not there to check for the gcc-source target.
[YOCTO #10265]
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jackie Huang [Sun, 9 Oct 2016 00:56:07 +0000 (08:56 +0800)]
net-tools: fix building with linux-4.8
Fix a build error when using the linux-4.8 headers that results in:
In file included from
.../sysroots/qemuarm64/usr/include/linux/if_tunnel.h:6:0,
from iptunnel.c:39:
.../qemuarm64/usr/include/linux/ip.h:85:8: error: redefinition of
'struct iphdr'
struct iphdr {
^~~~~
In file included from iptunnel.c:29:0:
.../qemuarm64/usr/include/netinet/ip.h:44:8: note: originally defined here
struct iphdr
^~~~~ Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com> Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Mon, 10 Oct 2016 07:50:41 +0000 (10:50 +0300)]
canned-wks: use GPT partition table
According to UEFI specification all EFI platforms must support
GUID Partition Table(GPT) disk layout. Here is a list of advantages
of using GPT disk layout over the legacy MBR partitioning:
- Logical Block Addresses (LBAs) are 64 bits (rather than 32 bits).
- Supports many partitions (rather than just four primary partitions).
- Provides both a primary and backup partition table for redundancy.
- Uses version number and size fields for future expansion.
- Uses CRC32 fields for improved data integrity.
- Defines a GUID for uniquely identifying each partition.
- Uses a GUID and attributes to define partition content type.
- Each partition contains a 36 character human readable name.
Used GPT partitioning in all EFI kickstart files.
Tested result images on NUC, MinnowBoard MAX and MinnowBoard Turbot.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Mon, 10 Oct 2016 07:40:51 +0000 (10:40 +0300)]
systemd-bootdisk.wks: update kernel command line
Used ttyS0 console.
Removed usage of ttyPCH0 (FRI2 leftover)
Decreased bootloader timeout to 5 seconds
Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not
needed for any of reference BSPs.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joshua Lock [Thu, 6 Oct 2016 10:06:54 +0000 (11:06 +0100)]
testimage: disable build tests for qemumips and qemumips64
It's not uncommon for qemumips[64] builds on the Yocto Project
autobuilder to fail during Sanity Tests after a very long timeout
period. This is due to the MIPS emulation in QEMU being slow and
some of the build tests taking a very long time on MIPS machines.
This patch works around this slowness by disabling the more
complex build tests for QEMU MIPS machines.
[YOCTO #10340]
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Fri, 7 Oct 2016 06:30:09 +0000 (09:30 +0300)]
mkgummidisk.wks: update kernel command line
Used ttyS0 console.
Removed usage of ttyPCH0 (FRI2 leftover)
Decreased bootloader timeout to 5 seconds
Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not
needed for any of reference BSPs.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We fail to compile simple CPP programs because CPP cannot
find relevant header files, looking for them in a non-existing place.
To fix this, we create a symlink of the name CPP expects and point it to
the corresponding existing directory.
[YOCTO#10354]
[YOCTO#10380]
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 7 Oct 2016 21:27:44 +0000 (17:27 -0400)]
linux-yocto/4.8: Enable R8169 driver since its needed by supported platforms
The Realtek 8169 driver is needed by the Minnowboard MAX, one of the
boards we currently support, since some of our images do not contain
modules by default, the network isnt working on genericx86, genericx86-64
and intel-core2-32 (meta-intel) when no modules are installed.
This patch fixes network on images not containing modules when
using the previously mentioned MACHINES for this board.
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Markus Lehtonen [Thu, 6 Oct 2016 13:37:04 +0000 (16:37 +0300)]
update-rc.d.bbclass: check that init script is executable before running it
Check that the init script that is going to be called in the prerm()
script really exists and is executable. There might be a packaging bug
or the script might've been removed already earlier in prerm().
[YOCTO #10299]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Thu, 6 Oct 2016 21:43:04 +0000 (10:43 +1300)]
classes/populate_sdk_ext: add symlinks and unfsd to support Eclipse plugin
The Yocto Project Eclipse plugin requires that runqemu and unfsd are
accessible within the SDK, and indeed the standard SDK has these. This
turns out to be fairly easy to do - we just need to add unfsd and symlink
it, runqemu and a few other scripts into the SDK's bin directory.
Fixes [YOCTO #10214].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fabio Berton [Tue, 4 Oct 2016 13:54:11 +0000 (10:54 -0300)]
u-boot: Add support to use uboot-extlinux-config class
Use uboot-extlinux-config class to create extlinux.conf file and then
install inside /boot/extlinux directory and also put file to deploy
dir. This file will be only create if UBOOT_EXTLINUX is set to 1.
You can use DEPLOYDIR/extlinux.conf file to install into final image
using wic setting:
Fabio Berton [Tue, 4 Oct 2016 13:54:10 +0000 (10:54 -0300)]
classes/uboot-extlinux-config: Add class
This class allow the extlinux.conf generation for U-Boot use.
The U-Boot support for it is given to allow the Generic Distribution
Configuration specification use by OpenEmbedded-based products.
This class can be inherited by u-boot recipes to create extlinux.conf
and boot using menu options.
U-boot with extlinux support is machine dependent, so to use this class
you need to set UBOOT_EXTLINUX to 1 in machine configuration file and
also set root= kernel cmdline UBOOT_EXTLINUX_ROOT. This variable is used
to pass root kernel cmdline, e.g:
UBOOT_EXTLINUX_ROOT = "root=/dev/mmcblk2p2"
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
