Mark Hatle [Thu, 3 Jul 2014 00:57:47 +0000 (19:57 -0500)]
rpm_5.4+cvs: Add RPM community tree for future development
Enable the rpm-5_4 branch via a specific recipe to help track the latest
community development. This should allow us to more quickly move to the next
release when it is available.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Thu, 3 Jul 2014 00:57:46 +0000 (19:57 -0500)]
package_rpm.bbclass: Should be using HOST_* not TARGET_*
When building target packages, HOST_OS and TARGET_OS are the same, as is the
VENDOR field. However, when building an SDK this is not true. The patch
corrects the oversight and switches to using the 'HOST' version and resolves
the issue of meta-mingw not working w/ the rpm packaging.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Thu, 3 Jul 2014 00:57:44 +0000 (19:57 -0500)]
rpm: Upgrade to 5.4.14
Update various patches. A few corrections to the patch descriptions,
otherwise simple quilt refresh or conflict resolution.
Remove rpm-solvedb.patch and rpm-respect-arch.patch. These are both related
to the old solvedb package dependency solver. This is no longer used since
we moved to smartpm.
rpm-stub-out-git_strerror was a backport and is no longer needed.
RPM 5.4.12 and newer normally requires Berkley DB 6.0 or newer. A small
patch to configure allows RPM to dynamically select DB 5.3 or DB 6.0 based
on what is available at configure time.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
perl, perl-native, perl-ptest: upgrade from 5.14.3 to 5.20.0
Changed:
- The Copying has no change, except the company address.
- pick patches from debian
http://ftp.de.debian.org/debian/pool/main/p/perl/perl_5.20.0-1.debian.tar.xz
- Not used by oe:
deprecate-with-apt.diff
patchlevel.diff
fakeroot.diff
- Create/Update perl-rdepends_${PV}.inc by the hardcode script;
- Update config.sh by:
1) Copy the Perl 5.20.0 source code onto your TARGET machine
linux qemuarm 3.14.5-yocto-standard from OE-Core rev: f506d0660c9949485268a92724ac770b5457b0ca
2) Execute sh Configure as normal and configure as required,
do not "make";
3) Compare with the old config.sh files, and update;
- perl-ptest.inc
1) Copy the souce code to ptest since almost 112 test cases
failed with the reason that no souce code found;
2) Add two patches to fix test case issue;
- perl-native
Reference perl (5.20.0-1) in debian to update perl shared library headers
https://packages.debian.org/experimental/i386/perl/filelist
- perl-build-in-t-dir.patch
The upstream has fix it. The issue description:
Perl cannot cross build in a path containing a directory that has the
name of "t". As an example, you can make the perl build fail with
"mkdir -p /tmp/build/t", go to the directory, unpack the sources,
configure and cross build.
- 0001-Fix-misparsing-of-maketext-strings.patch
as they are part of the upstream code now:
http://perl5.git.perl.org/perl.git/commit/1735f6f53ca19f99c6e9e39496c486af323ba6a8
- 0001-Prevent-premature-hsplit-calls-and-only-trigger-REHA.patch
the hash function changed:
http://perl5.git.perl.org/perl.git/commit/7dc8663964c66a698d31bbdc8e8abed69bddeec3
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libxml-parser-perl: fix do_compile failed with unrecognized option '-Wl, -O1'
Use '${CCLD}' as '${LD}' which the cpan was doing.
...
i586-poky-linux-ld: unrecognized option '-Wl,-O1'
i586-poky-linux-ld: use the --help option for usage information
...
Also fix do_configure warnings
...
'--SYSROOT' is not a known MakeMaker parameter name.
'-MARCH' is not a known MakeMaker parameter name.
...
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
openssh: avoid checking empty passwords to mess up with PAM modules
Previously, even if PAM is enabled for ssh, the daemon still tries to
authenticate an empty password. This leads to authentication failure
which would mess up with PAM modules.
As a result, if 'UsePAM', 'PermitEmptyPasswords' and 'PasswordAuthentication'
are enabled, no user can login correctly. We would meet the following error
message at the client side.
Write failed: Broken Pipe
This patch fixes the above problem by checking whether PAM is enabled before
authenticating an empty password. After all, if PAM is enabled, the task of
authenticating passwords should be handled to PAM modules.
[YOCTO #6466]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The only reference to this function is a commented-out assignment, and nothing
in oe-core nor meta-oe uses autotools_set_crosscompiling directly. As it's
unused, remove it.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Tue, 1 Jul 2014 16:04:41 +0000 (17:04 +0100)]
bitbake.conf: automatically add libexecdir/BPN/.debug to -dbg
pkglibexecdir is a fairly common location for package-specific binaries (in
automake this is $libexecdir/$PACKAGE), and binaries in there are already
installed to FILES_PN, so add the corresponding .debug directory to
FILES_PN-dbg.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Matthieu Crapet [Mon, 30 Jun 2014 14:23:21 +0000 (16:23 +0200)]
libav: add PACKAGECONFIG for theora, libvorbis, speex and openssl
Dropped libvorvis dependency because there is already a (better) builtin vorbis codec.
Don't confuse codec names: "vorbis" (builtin) and "libvorbis" (using external library).
Changes:
- add --enable-nonfree when faac or openssl are used
- add DESCRIPTION
- sort PACKAGECONFIG entries
Tested with libav-0.8.11 & libav-9.13.
Note: Be sure to have a recent version of bitbake (2014-06-11 or better) including this:
http://cgit.openembedded.org/bitbake/commit/?id=2e742c03e8dfdfa67899e7f5d579ed14bd87e139
It affects behavior of bb.utils.contains_any
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Mon, 16 Dec 2013 13:14:51 +0000 (14:14 +0100)]
gtk+: Add PACKAGECONFIG for directfb
* building without x11 doesn't work, because it sets default
gdkbackend to x11 and then requires cairo-xlib to be available
* checking for CAIRO_BACKEND... no
configure: error: Package requirements (cairo-xlib >= 1.6) were not met:
No package 'cairo-xlib' found
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Richard Purdie [Tue, 1 Jul 2014 17:01:07 +0000 (18:01 +0100)]
adt_installer: Fix real envrionment script issues
The previous change to adt_installer was incorrect, this reverts it and
fixes the real issue. The real issue is that if a previous installation was
present, it may have been moved and therefore the paths returned by opkg
could be a little odd.
To address this, when we move files to a different location, ensure we
update the *.list files with the revised paths. This means later installs
over the top return consistent values from opkg and the script works
as intended.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 1 Jul 2014 17:00:36 +0000 (18:00 +0100)]
toolchain-scripts: Add handling for CANADIANEXTRAOS
When we build a general toolchain script we should add all the OS
variants to PATH, not just the current one. This is because some can
cross reference each other and if the triplet prefixed ld can't be found
for example, you recieve strange errors.
Doing this resolves bugs exposed during SDK testing.
[YOCTO #6490]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For qemu-native, the pkg-config paths do not
include build host paths.
This is an issue for libsdl for example, where SDL is
used by qemu, but for qemu-native libsdl-native is not
built, but assumed to be provided by the build host.
Because pkg-config do not search for libsdl config files
on the build host sysroot, the configure stage of qemu-native
will fail because it will not find SDL as being installed.
Usually, the isssue is masked by a functional sdl-config that
will be interogated instead of pkg-config. However, on Build
Appliance, sdl-config is deliberately made non-functional,
so the issue manifests itself.
The fix will create an extended PKG_CONFIG_PATH, which does
include the build host sysroot paths for pkg-config.
Fix for [YOCTO #6495].
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Gawk was failing to compile because of the optional feature mpfr if it found
libmpfr on build host and linked against that or mpfr existed in sysroot but
not in deploy, or if gawk was pulled from sstate and someone had mpfr built.
[YOCTO# 6473]
Signed-off-by: Roxana Ciobanu <roxana.ciobanu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Roxana [Mon, 30 Jun 2014 09:44:03 +0000 (12:44 +0300)]
python3: fix builtins imports
The intent of this code is to generate things like -L=/usr/lib/foo so
for paths which start with "/" we should appent the "=". We should not do this
for ".". On some recent versions of binutils or patchsets on some recent
distros this appears to work differently and causes build failures, for example
on Ubuntu 14.04 LTS.
The simple fix is to check for "." as the path prefix.
[YOCTO #6467].
Signed-off-by: Roxana <roxana.ciobanu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drew Moseley [Thu, 26 Jun 2014 17:01:16 +0000 (13:01 -0400)]
classes/kernel: Use full path for symlink in update-alternatives.
Use a fully qualified path for the <path> parameter in calls
to update-alternatives. The chkconfig-alternatives version
requires a full path and without it, the symlink is not
properly created.
Signed-off-by: Drew Moseley <drew_moseley@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Wed, 25 Jun 2014 15:31:38 +0000 (16:31 +0100)]
classes/report-error: tweak summary message
* We don't want everyone to remove their identifying info, just if they
feel the need to
* Split lines for clarity
* A couple of grammar/spelling tweaks
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Wed, 25 Jun 2014 17:06:37 +0000 (19:06 +0200)]
test-dependencies.sh: Return non-zero return code when there was some failure detected
* this is useful when using from jenkins job where you don't want to read
output just to dectect how bad it was
* add .log suffix to all files, so they can be easily downloaded from
http servers without default mimetype set to something useful
* add recipes failed in step 1 to steps 2 and 3 to generate standalone
logs for them
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Wed, 25 Jun 2014 17:06:36 +0000 (19:06 +0200)]
sstate-diff-machines.sh: Return non-zero return code when there was some failure detected
* add --analyze option, which is useful when using from jenkins job
where you don't want to read output just to dectect how bad it was
* I was always using something like this inside jenkins job, but better
to share it in original script
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Thu, 26 Jun 2014 14:16:55 +0000 (15:16 +0100)]
patch.bbclass: unset TMPDIR after use
GNU Patch < 2.6.1 has a race condition so we create a per-instance TMPDIR to
avoid this. This was implemented by setting os.environ[TMPDIR] but at the end
of do_patch the temporary directory is deleted but TMPDIR is not unset.
In general this doesn't cause a problem but if do_patch is embedded in a larger
function then TMPDIR is set to a directory that doesn't exist. Avoid this by
removing TMPDIR from os.environ when the directory is deleted.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Gortmaker [Thu, 26 Jun 2014 19:08:47 +0000 (15:08 -0400)]
recipes-devtools: fix segfault in lib32-gcc with "." multilib_dir
When enabling a lib32-gcc in a 64 bit build, without doing any
other configuration, the mutilib dir is unspecified, which is
represented internally in gcc as "." and as such uncovers an
invalid free on a non-malloc'd pointer.
As suggested by the gcc folks, simply make sure the "." case
is also stored in a malloc'd pointer, so that the intended
runtime behaviour of the code remains unchanged.
Patch has been accepted by upstream maintainers of gcc.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drew Moseley [Sat, 28 Jun 2014 21:57:34 +0000 (17:57 -0400)]
initrdscripts: Try to boot if boot label is unknown
The init-live.sh scripts assumes that the boot label set by
the LABELS variable is either "boot", "install", or
"install-efi". If that variable is overridden to something else
we fall off the end of the case statement and the system locks
up. If the boot label is unknown, at least attempt to boot.
Signed-off-by: Drew Moseley <drew_moseley@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 27 Jun 2014 09:23:23 +0000 (10:23 +0100)]
distutils/distutils3: Fix bashism
read -d is a bashism. Replace with a direct exec to avoid the problem
in this case. This fixes silent build failures in do_install of
tasks on systems with dash as /bin/sh.
Also merge the fix to distutils for only changing necessary files
to disutils3 as well.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Wed, 25 Jun 2014 09:16:20 +0000 (02:16 -0700)]
createrepo: RDEPENDS on libxml2-python
Fixed the error when run createrepo on target:
Traceback (most recent call last):
File "/usr/share/createrepo/genpkgmetadata.py", line 27, in <module>
import libxml2
File "/usr/lib64/python2.7/site-packages/libxml2.py", line 1, in <module>
ImportError: No module named libxml2mod
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Wed, 18 Jun 2014 02:38:15 +0000 (10:38 +0800)]
initramfs-framework: get rid of udev-utils
Now that udev-utils package has been removed and 'udevadm' has been
moved to udev package, the initramfs-framework should also get rid
of the udev-utils package.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Wed, 18 Jun 2014 02:38:14 +0000 (10:38 +0800)]
systemd: remove udev-utils, move 'udevadm' to udev package
The udev package RDEPENDS on the udev-utils package, and the actually
udev-utils package relies on the udev package because if there's no
udev daemon, 'udevadm' command doesn't make much sense.
Now that we have removed udev-utils package and moved 'udevadm' to
the udev package in the older udev recipe, we should do the same
for systemd.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Wed, 18 Jun 2014 02:38:13 +0000 (10:38 +0800)]
udev: remove udev-utils, add 'udevadm' to udev package
Previously, the udev package only RRECOMMENDS udev-utils package,
but its init script in the udev package really relies on the
'udevadm' command to work properly. As a result, if 'NO_RECOMMENDATIONS'
is set to '1', errors occur at system start-up.
The udev-utils package only contains one file, that is /bin/udevadm.
So it's better that we remove the udev-utils package and move the
'udevadm' command to the udev package.
[YOCTO #6388]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
udev: update init script for conditional probing of platform bus
Make probing of "platform" bus conditional based on PROBE_PLATFORM_BUS
variable from /etc/default/udev-cache on subsequent boots when udev
cache is used. PROBE_PLATFORM_BUS has to be set to "yes" in order to
force probing on every boot, otherwise it uses the old default behaviour
of probing it just the first time.
This is helpful on modern SoCs where most of the low level peripheral
drivers are registered on the platform bus and need to be probed to load
the necessary modules and enable the connected buses and subsystems.
Signed-off-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Wed, 25 Jun 2014 00:28:06 +0000 (19:28 -0500)]
gcc-cross-canadian: Add configure-target-libgcc
While we're not going to package the libgcc component as part of the SDK,
we do need to generate it to get the unwind, and quadmath headers. Without
this change it is not possible to build eglibc or other components that
require these headers with the SDK toolchain.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ash Charles [Tue, 24 Jun 2014 20:10:18 +0000 (13:10 -0700)]
u-boot: Optionally deploy an environment or script file
Some boards are configured to read a script or environment file as part
of the u-boot boot sequence. This file, typically called 'uEnv.txt' or
'boot.scr', would be deployed alongside the u-boot binary. If a recipe
uses this u-boot.inc, such a file can be deployed by setting the optional
UBOOT_ENV parameter and including the file in the SRC_URI. For example:
non-PIC references to __ehdr_start in pie and shared
Rather than hacking every backend to not discard dynamic relocations
against an undefined hidden __ehdr_start, make it appear to be defined
early. We want __ehdr_start hidden before size_dynamic_sections so
that it isn't put in .dynsym, but we do need the dynamic relocations
for a PIE or shared library with a non-PIC reference. Defining it
early is wrong if we don't actually define the symbol later to its
proper value. (In some cases we want to leave the symbol undefined,
for example, when the ELF header isn't loaded, and we don't have this
infomation available in before_allocation.)
So replace the existing patches with this one.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Fri, 23 May 2014 13:30:34 +0000 (14:30 +0100)]
list-packageconfig-flags: improve option parsing
* Use optparse instead of getopt (less code & automatic help)
* Change help text / output to use "recipe" instead of "package"
* Print something to indicate the script is still gathering information
Note that the long options have been renamed as appropriate.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Paul Eggleton [Tue, 22 Apr 2014 11:07:35 +0000 (12:07 +0100)]
scripts: consolidate code to find bitbake path
Several of these scripts were using duplicated code (and slightly
different methods) to find the path to bitbake and add its lib
subdirectory to the Python import path. Add some common code to do this
and change the scripts to use it.
Fixes [YOCTO #5076].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Kai Kang [Fri, 20 Jun 2014 06:06:30 +0000 (14:06 +0800)]
syslinux: fix isohybird overflows on 32 bit system
When call isohybrid with option '-u', it overflows on a 32 bits host. It
seeks to 512 bytes before the end of the image to install gpt header. If
the size of image is larger than LONG_MAX, it overflows fseek() and
cause error:
yzhu1 [Wed, 18 Jun 2014 09:41:30 +0000 (05:41 -0400)]
nss-3.15.1: fix CVE-2013-1739
Mozilla Network Security Services (NSS) before 3.15.2 does
not ensure that data structures are initialized before
read operations, which allows remote attackers to cause a
denial of service or possibly have unspecified other
impact via vectors that trigger a decryption failure.
Ming Liu [Fri, 20 Jun 2014 10:28:01 +0000 (18:28 +0800)]
mesa.inc: remove '-' suffix in substitution of package names
The current substitution to package names is not correct, its original
purpose is: replace "mesa-" with "mesa-dri-", in which process the
"mesa" package is left out, this leads mesa package to announce to
conflict with itself, and therefore cause build failures when multilib
mesa are being added to rootfs.
Changing the replacement pattern to without a '-' suffix will fix it.
Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart [Mon, 23 Jun 2014 21:44:41 +0000 (14:44 -0700)]
mkefidisk.sh: Allow symlink for device
Allow the user to specify a symlink as the host device. If a link is
used, mkefidisk will now dereference it and use the link target when
looking for sysfs information.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristian Iorga [Mon, 23 Jun 2014 13:18:44 +0000 (16:18 +0300)]
iproute2: upgrade to 3.15.0
The main new features are:
* ss gets more attention
* Support for HHF qdisc
* Updates to bridge command
* Lots of vxlan related changes
* Lots of little corrections and build fixes.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oeqa/targetcontrol.py: Separate the matching of supported image fstypes from the resulting value check.
Because we used a bb.fatal call inside the get_image_fstype classmethod, this caused problems when accessed without instantiating the object with a valid bb environment.
Separating the matching part of the classmethod(that is usable by outside scripts) from the check of the resulting value.
The matching is done within a new classmethod and the latter keeps the old method name and internal functionality, this way we don't have to change any other target controllers code.
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
