Phil Blundell [Wed, 20 Jul 2011 10:07:32 +0000 (11:07 +0100)]
libgcc: correct mode on libgcc_s.so.1 to ensure it gets stripped
If the library is installed without execute permission then package.bbclass
will not consider it for stripping. This is particularly unfortunate because
there seems to be a bug somewhere else which is causing all DSOs to end up with
a NEEDED dependency on libgcc_s, even if they don't actually require it, and
hence it is getting installed in all images (for uclibc on i586 at least).
Signed-off-by: Phil Blundell <philb@gnu.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pseudo: fix uninitialised variable in realpath_fix.patch
Several users reported issues with pseudo on CentOS 5.x hosts, Matthew
McClintock tracked the issue to the realpath_fix.patch and Mark Hatle
supplied the included fix.
CC: Matthew McClintock <msm@freescale.com> CC: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Joshua Lock <josh@linux.intel.com>
Tom Rini [Fri, 15 Jul 2011 18:50:52 +0000 (11:50 -0700)]
autotools.bbclass: Add help2man-native to the main DEPENDS tree
With help2man no longer being required by sanity.bbclass we need to
make sure that if we are going to build autotools stuff that help2man
will be there as it's a frequent implicit dependency.
Tom Rini [Fri, 15 Jul 2011 18:49:33 +0000 (11:49 -0700)]
help2man-native: Add 1.38.2
This is a 'side port' of current oe.dev versions. PR is kept in sync
but we drop out the target recipes in order to punt on potential perl
problems. Here we do re-configure as we don't have a dance with
perl-native to deal with. Now that we can build it, don't require it.
Tom Rini [Fri, 15 Jul 2011 18:16:02 +0000 (11:16 -0700)]
bitbake.conf, sanity.bbclass: Drop mercurial-native
We have no hg URIs in the metadata, so don't require and don't
ASSUME_PROVIDED it either. meta-oe has a mercurial-native recipe
if hg URIs are added in a recipe later.
Acoording to http://gcc.gnu.org/bugzilla/show_bug.cgi?id=44392
correct fix should be
TARGET_EITHER && (arm_arch6 || !optimize_size)
not
TARGET_EITHER && (arm_arch6 && !optimize_size)
Kumar Gala [Tue, 19 Jul 2011 17:41:36 +0000 (12:41 -0500)]
flac: fix build issues with e500v2 (gnuspe) toolchain
For a PPC target flac will try to build with altivec optimizations.
Altivec and SPE are mutually exclusive options. Between flac's
configure choices and the ppce500v2 tune file options we'd end up with
a compile invocation with the following arguments:
-mabi=spe -mspe -mabi=altivec -maltivec
Which would cause the compile to fail due to the mutual exclusion.
Pulled in a patch from the debian SPE port that addresses this issue:
Kumar Gala [Tue, 19 Jul 2011 17:41:33 +0000 (12:41 -0500)]
tclibc-*libc: Utilize TARGET_FPU for gnuspe setting
Its possible that BASE_PACKAGE_ARCH isn't set to ppce500 or ppce500v2 when
we build native toolchains. So we can utilize TARGET_FPU being set to
'ppc-efd' or 'ppc-efs' to determine if we should enable the gnuspe ABI.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Tue, 19 Jul 2011 17:41:32 +0000 (12:41 -0500)]
gcc: Add gcc configure for PowerPC e500v2/SPE embedded floating point ABI
The e500v2 core utilizes a unique floating point programming model / ABI.
We utilize TARGET_FPU = "ppc-efd" to distinguish this choice (Embedded
scalar single-precision floating-point). When building the toolchain for
this ABI we need configure gcc with --enable-e500_double.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Tom Rini [Mon, 18 Jul 2011 15:46:35 +0000 (08:46 -0700)]
gnome-doc-utils: Package up python site packages, bump PR
Add python-dir to the inherits list so we can grab the python site packages
files as well. This fixes a 'installed but not packaged' QA problem with
the python site package files.
Phil Blundell [Tue, 19 Jul 2011 16:01:38 +0000 (17:01 +0100)]
uclibc: improve packaging granularity
Put each of the libraries into its own package rather than dumping them
all into libc0. This saves ~300kB on the installed size of an i586 micro-base-image
and avoids the need to set the hated LEAD_SONAME.
Yu Ke [Sat, 16 Jul 2011 02:00:45 +0000 (10:00 +0800)]
perl: revise the RRECOMMENDS_perl-modules for multilib case
current RRECOMMENDS_perl-modules replace the hardcode "perl-dbg",
"perl-misc" etc. which does not work in multilib case. Instead, it
should replace the "lib64-perl-dbg", "lib-64-perl-misc". without
doing this, current code will produce RRECOMMENDS=lib64-lib64-xxx etc
This patch revise the code to fix this issue
Signed-off-by: Yu Ke <ke.yu@intel.com> Signed-off-by: Xu Dongxiao <dongxiao.xu@intel.com>
Paul Eggleton [Tue, 19 Jul 2011 14:14:52 +0000 (15:14 +0100)]
scripts/contrib: add build time regression test script
test_build_time.sh is a bash script intended to be used in conjunction
with "git bisect run" in order to find regressions in build time, however
it can also be used independently. It cleans out the build output
directories, runs a specified worker script (an example is
test_build_time_worker.sh) under TIME(1), logs the results, and returns
a value telling "git bisect run" whether the build time is good (under
the specified threshold) or bad (over it).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
gcc-package-target: don't fail if the .la files we try to delete are not there to start with
This fixes:
| rm: cannot remove `/OE/tentacle/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/gcc-4.5-r39.1+svnr175127/image/usr/libexec/gcc/arm-angstrom-linux-gnueabi/4.5.4/*.la': No such file or directory
| ERROR: Function 'do_install' failed (see /OE/tentacle/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/gcc-4.5-r39.1+svnr175127/temp/log.do_install.19514 for further information)
NOTE: package gcc-4.5-r39.1+svnr175127: task do_install: Failed
bitbake.conf: Change TERM default fallback to XTERM instead of GNOME_TERM
Its better to use xterm since some folks may not be using gnome
or KDE. Chances of having xterm on build machines are lot more
than having gnome-terminal.
Darren Hart [Fri, 15 Jul 2011 21:44:24 +0000 (14:44 -0700)]
ofono: fix test block syntax error
A space is required prior to the closing square bracket. Without it,
a parsing error is reported to the console. I don't have hardware to
confirm, but I suspect the service would fail to function properly
as well.
Correct the typo.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Phil Blundell [Thu, 14 Jul 2011 15:24:51 +0000 (16:24 +0100)]
sanity, base: remove gcc3 check since qemu doesn't need it any more
Recent versions of qemu seem to be happy enough building with gcc 4.x, and indeed most modern distributions aren't shipping gcc3 any more, so there is no point checking for its presence as part of sanity.
Also remove the check_gcc3 function from base since nothing else uses it.
Darren Hart [Thu, 14 Jul 2011 22:39:55 +0000 (15:39 -0700)]
send-pull-request: default to --supress-cc=all
Unless the user specifies -c, don't pull in any email addresses from the
patches in the series. This avoids having to remove the email addresses from
patches being pulled in from upstream. If you want the email addresses on the
patch to be added, continue to use the -c option as before.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
scripts/hob: wrapper script to run hob gui with a UI specific config file
This ensures any configuration changes made in the GUI are only set when
using hob.
The default hob.local.conf is generated with a line which adds image_types
to INHERITS so that the GUI can introspect the available FSTYPES.
Darren Hart [Thu, 14 Jul 2011 21:05:42 +0000 (14:05 -0700)]
bb-matrix: correct BB and PM number canonicalization
The bash string operation ${BB##*0} was greedy and in addition to converting
"02" to "2", also converted "20" to "", causing all builds for a BB value ending
in 0 to run with BB_NUMBER_THREADS=1.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Phil Blundell [Wed, 13 Jul 2011 16:47:32 +0000 (17:47 +0100)]
eglibc: fix packaging of thread_db
Similarly to libnss*, if ${libdir} and ${base_libdir} were the same path then
libthread_db would land in ${PN}-dev rather than the intended place. As before,
fix this by moving eglibc-thread-db earlier in PACKAGES and adjusting its FILES
to not capture the .so symlink.
Bump PR for both 2.12 and 2.13.
Signed-off-by: Phil Blundell <philb@gnu.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andrea Adami [Wed, 13 Jul 2011 22:50:26 +0000 (00:50 +0200)]
kernel.bbclass: remove unintended change of INITRAMFS_TASK
* during an unfortunate round of tests right before commiting the patch
* do_configure[depends] became kernel_do_configure[depends]
* Nonsense!
* As documented in commit 4dfef62dfe54a3b2c557a6df81d155adc1e03ccb
* of OpenEmbedded git server, this must be in do_configure[depends]
* to do the magic.
Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Phil Blundell [Thu, 14 Jul 2011 09:02:11 +0000 (10:02 +0100)]
insane: make GNU_HASH check slightly more robust (avoids false negatives with gold); add check for useless rpaths
It isn't safe to make assumptions about the order of the entries in the dynamic section. Fix the ldflags test to cope with the case where GNU_HASH comes before NEEDED and/or INIT.
Also, add a new warning for binaries which contain useless (but benign) rpath entries pointing to the default search locations.
Signed-off-by: Phil Blundell <philb@gnu.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Rini [Wed, 13 Jul 2011 19:05:35 +0000 (12:05 -0700)]
libpcre: Add bzip2, zlib and readline to DEPENDS
libpcre will build, if found, optional support for bzip2/zlib in
pcregrep and a readline frontend to pcretest. It will not however
listen to --disable-pcregrep-{libz,libbz2} and will still build
these if found. So we add bzip2, zlib and readline to DEPENDS to make
sure that we get consistent builds.
Signed-off-by: Tom Rini <tom_rini@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To fix these package qa warnings
WARNING: For recipe binutils, the following files were installed but not shipped in any package:
WARNING: /usr/bin/ld.bfd
WARNING: /usr/bin/elfedit
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
ofono: fix packaging and clean up custom do_install
The makefile installs the udev rule in the proper place already. Also fix:
WARNING: For recipe ofono, the following files were installed but not shipped in any package:
WARNING: /lib/udev/rules.d/97-ofono.rules
WARNING: /lib/systemd/system/ofono.service
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yu Ke [Wed, 13 Jul 2011 08:58:27 +0000 (16:58 +0800)]
libzypp: fix for non /usr/lib libdir case
this patch has two fixes:
1. the src tool/CMakeLists.txt has hardcode "lib", so add a patch to fix it
2. the recipe has hardcode "-DLIB=lib", so replace it with libdir
Yu Ke [Wed, 13 Jul 2011 08:57:39 +0000 (16:57 +0800)]
sat-solver: fix for non /usr/lib libdir case
when libdir set to non /usr/lib like /usr/lib64, there is do_configure error:
"
-- Libraries will be installed in /usr/lib
CMake Error at /home/kyu3/sdb/lib64/tmp/sysroots/x86_64-linux/usr/share/cmake-2.8/Modules/FindPackageHandleStandardArgs.cmake:91 (MESSAGE):
Please install 'check' and 'check-devel' packages (missing: CHECK_LIBRARY)
Call Stack (most recent call first):
/home/kyu3/sdb/lib64/tmp/sysroots/x86_64-linux/usr/share/cmake-2.8/Modules/FindPackageHandleStandardArgs.cmake:252 (_FPHSA_FAILURE_MESSAGE)
cmake/modules/FindCheck.cmake:17 (FIND_PACKAGE_HANDLE_STANDARD_ARGS)
CMakeLists.txt:35 (FIND_PACKAGE)
-- Configuring incomplete, errors occurred!
"
The reason is that cmake did not search /usr/lib64 for libcheck, thus report error
add ${libdir} to the CMAKE_SYSTEM_LIBRARY_PATH can fix this issue.
Phil Blundell [Wed, 13 Jul 2011 09:03:42 +0000 (10:03 +0100)]
eglibc: ensure that NSS libs go into the right package when ${base_libdir} and ${libdir} are the same
Previously, libnss_hesiod et al. could get swallowed by the wildcarded glob in ${PN}-dev.
Fix it by moving eglibc-extra-nss earlier in the PACKAGES and adjusting its FILES to ensure
that the devel symlinks don't get caught.
Signed-off-by: Phil Blundell <philb@gnu.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yu Ke [Thu, 7 Jul 2011 14:22:11 +0000 (22:22 +0800)]
sato-sdk: add clutter for sato-sdk image
Yocto ADT has Eclips clutter template, so it is better to have
clutter in SDK image to support ADT. this patch add clutter
and clutter-box2d app to sato-sdk image for this purpose
Fix [YOCTO #891]
Signed-off-by: Yu Ke <ke.yu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Tue, 12 Jul 2011 13:29:28 +0000 (14:29 +0100)]
insane.bbclass: skip rdepends QA checks for kernel / modules
The kernel and module recipes have very few dbg/dev packages, however
they can easily have false positive results from the rdepends QA checks
(e.g. kernel-module-lirc-dev). Thus disable these tests for any recipe
that inherits kernel or module-base.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
