Scott Rifenbark [Wed, 20 Oct 2010 16:47:09 +0000 (09:47 -0700)]
Review changes applied.
1. Added Richard Purdie's general editing feedback to the "Welcome" and
"Introducing the Yocto Project Development Environment" sections.
2. Added Kevin Tian's feedback: 1) changed "Sudo" to "sudo", 2) reversed
the order of the sample "cd" and "source" commands since the "source" command
builds the directory structure first so changing to the directory before running
"source" made no sense, 3) removed the "bitbake qemu-native" command.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Wed, 20 Oct 2010 16:44:35 +0000 (09:44 -0700)]
Updated figure.
Feedback from Kevin Tian suggested that the outer box be labeled "QEMU" rather
than "Target." Also that the two inner boxes be "Set of Emulated Devices" and
"Target CPU." Final change was the use of "Yocto Project Scripts" rather than
"Yocto Linux Scripts."
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Wed, 20 Oct 2010 16:36:08 +0000 (09:36 -0700)]
Removed reference to pre-build in section 5.3.2, "Using OprofileUI".
The "Using OprofileUI" section had a description of how to use a
pre-built UI and how to download and build one. Feedback from Jessica
Zhang suggested removing the instruction for using a pre-built UI.
All that remains in the first paragraph now is instruction on how
to download and build the UI.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Mon, 18 Oct 2010 20:53:26 +0000 (13:53 -0700)]
Added the Anjuta Plug-in information
Added section 5.1.2.2 "The Anjuta Plug-in" into the Poky Reference Manual.
This section consists of sub-sections 5.1.2.2.1 "Setting Up the Anjuta
Plug-in", 5.1.2.2.2 "Configuring the Anjuta Plug-in", and 5.1.2.2.3 "Using
the Anjuta Plug-in". This information was in the original Poky Handbook
but had been removed by me since I thought it was not going to be supported
for the 0.9 Yocto Release. It has now been restored with a note indicating
that Anjuta will not be supported post 0.9 release.
I did some general text editing in each section for readability.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Zhai Edwin [Fri, 22 Oct 2010 09:11:26 +0000 (17:11 +0800)]
Fix adding new contact failure when starting contacts for the 1st time
When contacts called for the 1st time, adding new contact always failed but
worked after restart. The reason is e-addressbook-factory used to handle
addressbook leads a segmentation fault. Root cause is that factory would
create the data base if not exist, but use it without proper
initialization.
Richard Purdie [Fri, 22 Oct 2010 13:27:44 +0000 (14:27 +0100)]
sstate: Fix mirror handling for file:// urls
The fetcher has special handling for file:// mirror urls, being efficient and
just providing an updated path. Unfortunately the sstate fetching code wasn't
able to handle this. This patch detects this and injects a symlink to ensure
everything works. It also fixes some datastore references to be correct and
ensures the sstate download directory exists if it doesn't already.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Joshua Lock [Fri, 22 Oct 2010 12:50:14 +0000 (13:50 +0100)]
documentation/bsp: update to reference FILESEXTRAPATHS
It's no longer neccesarry to define THISDIR and FILESPATH in each bbappend
recipe. Should you need to reference extra files you should use FILESEXTRAPATHS
Richard Purdie [Fri, 22 Oct 2010 12:00:40 +0000 (13:00 +0100)]
pseudo/fakeroot: Move the pseudo directory creation into bitbake
If sstate was used to accelerate a build, the pseudo directory might not have
been created leading to subsequent task failures.
Also, sstate packages were not being installed under pseudo context meaning
file permissions could have been lost.
Fix these problems by creating a FAKEROOTDIRS variable which bitbake ensures
exists before running tasks and running the appropriate setscene tasks under
fakeroot context.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Richard Purdie [Fri, 22 Oct 2010 11:56:20 +0000 (12:56 +0100)]
package_rpm: Don't check for the existence of dvar as its never used
If a sstate package exists for the package task but not for the rpm packaging
task, the output from the package task will be used. The directory pointed
to by dvar will not exist under this scenario.
Since the directory is never used by the packaging process remove the
check, substituting the pkgd variable which is always present and used.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Richard Purdie [Fri, 22 Oct 2010 11:51:35 +0000 (12:51 +0100)]
sstate: Fix broken plaindirs support
When installing a sstate package, directories tracked by plaindirs were being installed
to the incorrect location. With the current implementation this was limited to
the do_package task.
This patch ensures plaindirs tracked files are created in the correct location, fixing
the bug where these files would go missing.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Mark Hatle [Thu, 21 Oct 2010 17:26:14 +0000 (12:26 -0500)]
at: Fix nonstripbinaries.patch
The commit '0e0d14ed1e88ebff876abb3d00b08627a3879e8d' introduced a new patch
nonstripbinaries.patch, the filename format caused the patch to not apply.
Simple fix made by correcting the path.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Bruce Ashfield [Thu, 21 Oct 2010 04:37:54 +0000 (00:37 -0400)]
gst-ffmpeg: powerpc build errors
Fixes [BUGID #501]
While building the poky-image-sato target, gst-ffmpeg failed when
it attempted to run altivec tests on the host. We can live without
this optimization, so the easiest fix is to simply disable it.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Thu, 21 Oct 2010 04:30:07 +0000 (00:30 -0400)]
mpc8315e-rdb: align PACKAGE_EXTRA_ARCHS with tuning
Fixes [BUGID #500]
While the tuning for the mpc8315e is 603e, the PACKAGE_EXTRA_ARCHES
was ppce300. This created a mismatch and resulted in rootfs assembly
issues due to missing locales.
We align both at 603 and can revist a better tuning in the future.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Mei Lei [Thu, 21 Oct 2010 04:36:51 +0000 (12:36 +0800)]
at: remove nonrootinstall patch and modify some relevant files
remove nonrootinstall patch, and use a patch named nonstripbinaries to modi
fy the /at-3.1.10.2/Makefile.in, so it can also handles stripping of the bi
naries
Yu Ke [Tue, 19 Oct 2010 07:15:17 +0000 (15:15 +0800)]
sysklogd: correct the syslog link and conf file
This commit fix [BUGID #482]
Two issues cause bug 482:
- firsty, there are two version of syslog: sysklogd and busybox.
the busybox one is directly installed as /etc/init.d/syslog,
and the sysklogd one is installed by update-alternative. the
update-alternative will thus fail because the /etc/init.d/syslog
(busybox one) already exist and not a link. so the correct way
is to install busybox one by update-alternative, the layout will be:
/etc/init.d/syslog.busybox
/etc/init.d/syslog.sysklogd
/etc/init.d/syslog -> syslog.busybox or
/etc/init.d/syslog -> syslog.sysklogd
- secondly, sysklogd default conf is not comply with poky. Its dir /var/adm/
does not exist. Check the debian /etc/syslog.conf and find it is more
sophiscated and suitable, so port /etc/syslog.conf from debian.
Bruce Ashfield [Mon, 18 Oct 2010 19:33:30 +0000 (15:33 -0400)]
wrs_meta: emenlow updates
Fixes [BUGID #465]
wrs_meta: add logbuf size feature
A 16k kernel log buffer size is too small for emenlow and atom-pc -
boot messages are routinely lost with the current setting. Increase
the size to something more reasonable - 64k seems to be a good
compromise.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
emenlow: add cmdline option for reboot quirk
The default reboot options don't work for emenlow i.e. kbd + triple
results in a reboot hang. According to the emenlow chipset manual,
port CF9 is supported, so let's use that.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Richard Purdie [Tue, 19 Oct 2010 16:17:41 +0000 (17:17 +0100)]
bitbake/fetch/git: Ensure fullclone repositories are fully fetched
The git fetcher was failing to pull in new branches into a git
repository mirror tarball as the git fetch command being used didn't
add new remote branches.
This patch uses "git fetch --all" for fullclones to ensure any
new remote branches are cloned correctly.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Richard Purdie [Tue, 19 Oct 2010 11:30:21 +0000 (12:30 +0100)]
bitbake/fetcher: Deal with a ton of different bugs
The more we try and patch up the fetcher code, the more things break. The
code blocks in question are practically unreadable and are full of corner
cases where fetching could fail. In summary the issues noticed included:
a) Always fetching strange broken urls from the premirror for "noclone"
git repositories
b) Not creating or rewriting .md5 stamp files inconsistently
c) Always fetching git source mirror tarballs from the premirror even
if they already exist but the checkout directory does now
d) Passing "None" values to os.access() and os.path.extsts() checks under
certain circumstances
e) Not using fetched git mirror tarballs if the preexist and always
try and fetch them.
This patch rewrites the sections of code in question to be simpler and
more readable, fixing the above problems and most likely other odd
corner cases.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Kevin Tian [Mon, 18 Oct 2010 09:38:32 +0000 (17:38 +0800)]
sed: use ALTERNATIVE_LINK
update-alternatives.bbclass assumes /usr/bin/sed if ALTERNATIVE_LINK is not
specified, however sed has changed its default installation directory to
/bin/sed. This causes below errors at the first boot of lsb image:
update-alternatives: Error: cannot register alternative sed to /usr/bin/sed
since it is already registered to /bin/sed
Bruce Ashfield [Mon, 18 Oct 2010 05:15:33 +0000 (01:15 -0400)]
wrs_meta: update SRCREV for netfilter options
Fixes [BUGID #199]
Updating the SRCREV for wrs_meta to import a set of default
netfilter options, which can then be applied to any BSP. This
keeps the default BSP configs small, while allowing the
functionality to be available.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Mon, 18 Oct 2010 05:12:08 +0000 (01:12 -0400)]
kernel tools: update SRCREV
Fixes [BUGID #199]
To allow optional features to be enabled for a given BSP, we
need to re-enable this functionality in the kernel tools. The
following commit in that repo fixes a problem when passing
feature names:
If a directory is passed to updateme, do NOT expand it to a
full path, the compilation phase will search and do this
while applying some special logic to find properly named
features.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Sun, 17 Oct 2010 05:18:48 +0000 (01:18 -0400)]
linux-wrs: pass netfilter options as an addon feature
Fixes [BUGID #199]
Although an optional feature to a base BSP, most of the machines
currently supported want/need the netfilter options. To enforce
this configuration, it is temporarily forced in the kernel
recipe itself, but can move to machine configurations in the
future.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Sun, 17 Oct 2010 05:14:11 +0000 (01:14 -0400)]
linux-wrs: allow optional features via KERNEL_FEATURES variable
Fixes [BUGID #199]
Reinstate the ability to specify optional/additional kernel features
when updating the tree.
This is done via the variable KERNEL_FEATURES which specifies
a list of features to be appended to the current branch and
config. These features are part of the wrs_meta branch in the
kernel repository and hence are self contained within the
kernel tree waiting to be activated. This saves multiple
branches simply to allow a machine to have many profiles.
The kernel patching/configuration phases will locate these
features and add them to the meta_series, which in turn
modifies the tree.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Richard Purdie [Fri, 15 Oct 2010 15:30:41 +0000 (16:30 +0100)]
shared-mime-info: Don't run the util for the native version of the package
The whole point of building a native version of this package is
to provide the share-mime-info binary so using it in do_install
of the native package is incorrect. Add a modified do_install for
the native version of the package to avoid this.
[BUGID #466]
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Dongxiao Xu [Fri, 15 Oct 2010 08:45:21 +0000 (16:45 +0800)]
Use gdk_threads_enter/gdk_threads_leave to ensure gtk multithread safe
If the video player tries to play an unknown type file, it will enter
the error_cb() function, which is called in another thread.
Use gdk_threads_enter/gdk_threads_leave to ensure the safe of gtk
multi-thread operation.
Joshua Lock [Fri, 15 Oct 2010 07:27:11 +0000 (08:27 +0100)]
make: enable make-native
Fedora 14 ships with a version of make which doesn't work with the Makefiles
shipped in our busybox and eglibc versions. Enable make native as a workaround.
Darren Hart [Thu, 14 Oct 2010 19:33:56 +0000 (12:33 -0700)]
atom-pc: remove kernel video mode parameters
The kernel video mode parameters are not needed with the atom-pc linux-wrs
configuration. Without them, we boot up with a standard 80x25 text display
until the Intel i915 driver is initialized, at which point we switch to a
higher resolution text mode. Afterwards, a sato image will start the splash
screen and successfully boot to X.
Tested on the Toshiba NB305 netbook and the Black Sand development board.
[BUGID #450]
Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Tom Zanussi <tom.zanussi@intel.com> CC: Bruce Ashfield <bruce.ashfield@windriver.com> CC: Richard Purdie <rpurdie@linux.intel.com>
Bruce Ashfield [Thu, 14 Oct 2010 20:47:02 +0000 (16:47 -0400)]
linux-wrs: update SRCREV for mpc8315e-rdb
Fixes [BUGID: 423]
The mpc8315e-rdb BSP failed to build due to -Os being used
in the boot code. The fix that doesn't involve changing
the compiler is to remove -Os in the powerpc code and keep
it contained on the BSP branch.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Scott Garman [Thu, 14 Oct 2010 18:29:44 +0000 (11:29 -0700)]
poky-qemu: miscellaneous bugfixes
In scenarios where the POKY_NATIVE_SYSROOT env variable hasn't been
set up, bug #427 can still be triggered. This fixes it by running
setup_tmpdir(). This fixes [BUGID #427].
Also, the qemu tap dev lock directory needs to be chmod 777 so that
multiple users can create and delete lock files.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Tom Zanussi [Thu, 14 Oct 2010 18:38:47 +0000 (13:38 -0500)]
atom-pc: get rid of undefined video mode prompt on bootup
Temporary fix for [BUGID #450]
This fixes the video mode number to the expected value for this video
setting, but the setting itself needs to be fixed along with matching
config options - this patch is just a temporary fix for RC2.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Saul Wold [Thu, 14 Oct 2010 16:48:21 +0000 (09:48 -0700)]
sysvinit: add check for no X11 to disbale psplash
Add a check to the rc script to check if the /etc/init.d/xserver-nodm
script exists and is executable and not disable psplash if it is,
otherwise disable pspalsh since we do not have X installed.
Richard Purdie [Thu, 14 Oct 2010 10:44:57 +0000 (11:44 +0100)]
eglibc-nativesdk: Add patch to change the search path of the dynamic linker
Change the search path of the dynamic linker to search ld.so.cache as a last resort when
trying to find libraries at runtime. This means libs in /opt/poky are used in preference
but any host libs such as libGL can also be found. See the patch for a more detailed
description.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Bruce Ashfield [Thu, 14 Oct 2010 00:15:31 +0000 (20:15 -0400)]
linux-wrs: update SRCREVs
Fixes [BUGID #432, #438, #437, #422]
[atom-pc: switch to the atom-pc branch
The atom-pc has a dedicated branch and merged kernel commits.
Swtich the kernel recipe to use the fully integrated BSP
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>]
[atom-pc: add kernel config options needed for -live images
Fixes [BUGID #432]
Live images require VFAT filesystem and loop device support - this
adds the required kernel config options for them.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>]
[atom-pc: Add netbook wireless networking support for NB305 and eee901
Add the atom-pc-wifi.cfg to enable wireless networking support for the netbooks
mentioned in the atom-pc machine config file.
Note: this adds a staging tree driver (rt2860sta) for the eee901 wifi.
[BUGID #438]
Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Tom Zanussi <tom.zanussi@intel.com> CC: Richard Purdie <rpurdie@linux.intel.com> CC: Bruce Ashfield <bruce.ashfield@windriver.com>]
[atom-pc: Add netbook wired networking support for NB305, Aspire One, and eee901
Add the atom-pc-eth.cfg to enable wired networking support for the three
netbooks mentioned in the atom-pc machine config file.
[BUGID #437]
Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Tom Zanussi <tom.zanussi@intel.com> CC: Richard Purdie <rpurdie@linux.intel.com> CC: Bruce Ashfield <bruce.ashfield@windriver.com>]
[routerstationpro: add missing kernel patches
[BUGID: #422]
Add the kernel patches required for routerstaion pro boot
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>]
[netbook: allow hardisk booting
[BUGID: #445]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>] Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Tue, 12 Oct 2010 02:41:07 +0000 (22:41 -0400)]
emenlow/linux-wrs: merge emenlow configuration
Complete the merge of the emenlow BSP, by removing the external
configurations from the emelnow layer and merging them into
the wrs_meta branch of the kernel tree. This also allows the
emenlow to drop the tools config fragement and use the common
definitions shared by BSPs maintained in the kernel.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Dongxiao Xu [Wed, 13 Oct 2010 02:08:44 +0000 (10:08 +0800)]
libowl-av: Fix music player crash if adding unknown type files
Using bus message to call function flush_head/feed_head in main thread
to protect private data operation.
A better fix may be to listen to bus message "CODEC_NOT_FOUND" and
"MISSING_PLUGIN" directly to avoid hooking into "unknown-type" signal.
We will revisit it in next period.
Zhai Edwin [Wed, 13 Oct 2010 04:42:09 +0000 (12:42 +0800)]
tzdata: install zone.tab and iso1366.tab
These files are removed in libc-package.bbclass. Missing of zone.tab cause
get_zone_directory in libical return NULL for strlen, which leads seg fault
of dates & tasks.
Richard Purdie [Wed, 13 Oct 2010 16:41:29 +0000 (17:41 +0100)]
meta-toolchain: Update the way ld.so.cache is handled
Fix the library search path so that libs in the toolchain in /opt/
have priority over those in base system but ones from the base system
can still be found.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Richard Purdie [Tue, 12 Oct 2010 14:52:07 +0000 (15:52 +0100)]
rm_work: Fix interaction issues with pseudo
This class needs to wipe out the contents of the pseudo database but also
ensure the pseudo directory exists for any subsequent tasks and also ensure
any pseudo server has shut down before removing the database. This patch
does all of these things.
[BUGID #222]
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Bruce Ashfield [Mon, 11 Oct 2010 04:26:12 +0000 (00:26 -0400)]
mpc8315e-rdb: create machine and tuning configuration
BUGID: 423
Introduce the basic mpc8315e BSP. By default this BSP uses
the basic 603 tuning and soft-float. There are issues with
the e300 tuning and eglibc, and the compiler. Subsequent
commits will further tune this BSP.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
