Richard Purdie [Thu, 5 Sep 2013 15:17:27 +0000 (16:17 +0100)]
devshell: Don't corrupt the fakeroot variables
The devshell anonymous python fragment overwrites variables in the
datastore with their expanded versions. If this runs before the code
in allarch.bbclass which changes TARGET_OS, we can end up with different
directories in the fakeroot environment variables, some expanded with
the original TARGET_OS value.
The devshell code only needs to run before the task itself so we change
to trigger it to run at task execution time only using a flag.
[YOCTO #4795]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
run-postinsts: move script execution from S98 to S99 in rcS.d
Apparently, when opkg/dpkg and run-postinsts are installed in the same
time, opkg/dpkg postinstall overwrites the run-postinsts link in rcS.d.
This will make run-postinsts script useless and the delayed postinstalls
will not be run.
This issue happens only when 'package-management' is disabled and, in
the same time, dpkg/opkg ends up in the image: either pulled by some
dependency or manually installed.
With this patch, both opkg/dpkg and run-postinsts scripts will run but
the former will silently fail because the package metadata is removed from
the image since 'pacakge-management' is disabled.
[YOCTO #4484]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jukka Rissanen [Fri, 6 Sep 2013 07:23:00 +0000 (10:23 +0300)]
connman: Ignore the NFS root network interface in init script
The connman init.d script tried to ignore all the network interfaces
if NFS root is configured. We should only ignore the interface
that is used by NFS root.
[YOCTO #4587]
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
useradd: Handle users from a package being used in others
If there is a package A (TUNE_PKGARCH) which is depended upon by B which
is MACHINE_ARCH and you build B for machine X, then Y, the user isn't
present in the sysroot for machine Y since the useradd code is never
triggered.
The change ensures the code does get triggered and the user is present.
[YOCTO 4739]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jason Wessel [Thu, 22 Aug 2013 23:04:27 +0000 (18:04 -0500)]
kernel.bbclass, image.bbclass: Implement kernel INITRAMFS dependency and bundling
This patch aims to fix the following two cases for the INITRAMFS generation.
1) Allow an image recipe to specify a paired INITRAMFS recipe such
as core-image-minimal-initramfs. This allows building a base
image which always generates the needed initramfs image in one step
2) Allow building a single binary which contains a kernel and
the initramfs.
A key requirement of the initramfs is to be able to add kernel
modules. The current implementation of the INITRAMFS_IMAGE variable
has a circular dependency when using kernel modules in the initramfs
image.bb file that is caused by kernel.bbclass trying to build the
initramfs before the kernel's do_install rule.
The solution for this problem is to have the kernel's
do_bundle_initramfs_image task depend on the do_rootfs from the
INITRAMFS_IMAGE and not some intermediate point. The image.bbclass
will also sets up dependencies to make the initramfs creation task run
last.
The code to bundle the kernel and initramfs together has been added.
At a high level, all it is doing is invoking a second compilation of
the kernel but changing the value of CONFIG_INITRAMFS_SOURCE to point
to the generated initramfs from the image recipe.
[YOCTO #4072]
Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Mihai Lindner [Thu, 5 Sep 2013 15:52:42 +0000 (18:52 +0300)]
oeqa/runtime/scp: replace dd call
Use a file object to generate a our test file instead of calling `dd`;
removes dd's output from testimage.log, keeps unittest output clean.
Also remove unused imports.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mihai Lindner [Thu, 5 Sep 2013 15:52:41 +0000 (18:52 +0300)]
oeqa/utils/sshcontrol: tweak ssh options
Add ssh_options to be used, the same, by ssh and scp:
Decrease LogLevel to ERROR, to suppress warnings (e.g. ssh host
verifications, two warnings in case of having openssh with hpn patches);
We no longer presume that the first line is a warning.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Peter A. Bigot [Sat, 31 Aug 2013 23:50:13 +0000 (18:50 -0500)]
chkconfig: remove linuxstdbase symlinks
These links were moved to the lsb package because lsbsetup was to be
removed. Subsequently an earlier patch that moved them to chkconfig was
also merged. This results in duplicate installations that generate a
warning when building core-image-lsb under DISTRO=poky-lsb which enables the
linuxstdbase feature.
Signed-off-by: Peter A. Bigot <pab@pabigot.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since its initial commit from the classic OpenEmbedded repository
in 43e94412c45b4b79485a64010c76d89b245bb235, serialization was
commented out, reportedly due to some issue with powerpc in the
boost version 1.36. In the classic OpenEmbedded repository,
serialization has been added again since version 1.4x.
The commit removes the outdated comment and adds serialization to
the BOOST_LIBS after testing `bitbake boost` and bitbaking some
applications using boost from the meta-ros layer for qemuppc.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sysklogd: lower the ALTERNATIVE_PRIORITY in case of systemd
The sysklogd package hasn't got systemd support yet. So in case of
a systemd based system, the commands and corresponding configuration
files should have a lower priority than that of the busybox's syslogd
and klogd utilities. These two utilities from busybox have internal
systemd support if CONFIG_FEATURE_SYSTEMD is enabled. And that config
item is enabled by default.
[YOCTO #5066]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default, busybox has CONFIG_FEATURE_SYSLOGD_CFG enabled, but it
doesn't ship a configuration file.
This patch adds a configuration file (/etc/syslog.conf) to the
busybox-syslog package. This configuration file mainly serves as a
placeholder now.
The advantages of this change are:
1. Make the users aware of the fact that the /etc/syslog.conf file
will actually be parsed by busybox's syslogd utility. And configuring
that file will change the logging behaviour.
2. In a systemd based system, this file will prevent the same configuration
file provided by the sysklogd package from messing things up.
[YOCTO #5066]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If rule directory is inexist, the acpid initscript will exit with success,
but the daemon will be not running.
Print message in this case to tell user that the daemon is not running.
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Peter A. Bigot [Mon, 26 Aug 2013 00:40:06 +0000 (19:40 -0500)]
pseudo: fix memory leak and missed privilege drop
qemu.bbclass adds PSEUDO_UNLOAD=1 in qemu_run_binary to avoid reference to
pseudo functions that may not exist in the target environment. This patch
detects the addition of that variable within the environment to which the
call applies, even if not present in the parent environment.
As a side effect it fixes a memory leak.
[YOCTO #4843]
Signed-off-by: Peter A. Bigot <pab@pabigot.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Thu, 5 Sep 2013 02:20:22 +0000 (22:20 -0400)]
linux-yocto/3.10: fix YAFFS2 build issues
The 3.10 yaffs2 refresh caused several build errors. One due the single kernel
version support being incomplete, and two others due to core kernel changes
creating incompatbilies with the yaffs2 code.
The following three commits fix the issues.
b76f445 yaffs2: disable procfs support ecfe5ed yaffs2: convert to kuid_t and kgid_t fa8efc9 yaffs2: restore multi-kernel version functionality
bumping the SRCREVs for all BSPs to import the fix.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mihai Prica [Mon, 2 Sep 2013 12:50:51 +0000 (15:50 +0300)]
scripts/runqemu: Fix MACHINE regex
When runqemu tries to determine the MACHINE variable from a
kernel or vmdk filename that doesn't contain any known machine
name, the variable gets set to the filename. It should remain
unset and cause an error.
[YOCTO #2890]
Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Tue, 3 Sep 2013 12:37:01 +0000 (20:37 +0800)]
glib-2.0: fix a host contamination issue
We will see the following warning by accident:
$ bitbake nativesdk-glib-2.0
WARNING: QA Issue: nativesdk-glib-2.0-dbg: found library in wrong location:
/opt/poky/0.5.5/sysroots/x86_64-pokysdk-linux/usr/share/gdb/auto-load/opt/
poky/0.5.5/sysroots/x86_64-pokysdk-linux/usr/lib/libglib-2.0.so.0.3600.4-gdb.py
There are two '/opt/poky/0.5.5/sysroots' in the path when the warning
comes, this is what we need since glib-2.0 has done this intentionally
in its configure and Makefile.
This is because the configure script uses the:
ABS_GLIB_RUNTIME_LIBDIR = "readlink -f $libdir/$with_runtime_libdir`"
to figure out the abs dir, so if
/opt/poky/0.5.5/sysroots/x86_64-pokysdk-linux/usr/lib/ exists , there
would be warning, otherwise no warning.
We can change the "readlink -f" to "readlink -m" to fix the host
contamination issue.
Another fix could be:
ABS_GLIB_RUNTIME_LIBDIR =""
But this is much more like a workaround.
[YOCTO #5099]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 4 Sep 2013 11:49:10 +0000 (12:49 +0100)]
bitbake.conf: Add SDKPKGSUFFIX to hash whitelist
The gcc recipes reference this however we account for it in the work
directory paths and we don't want recipes depending on the value changing.
This avoids unecessary rebuilds when switching SDKs.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 4 Sep 2013 11:48:27 +0000 (12:48 +0100)]
package.bbclass: Fix darwin shlib handling
shlibs dependency calculations on darwin we not functioning correctly, we
need to process the filename without the complete path. If we don't,
"." characters in the path cause problems.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Olof Johansson [Wed, 4 Sep 2013 06:30:29 +0000 (08:30 +0200)]
flex: Only use create_wrapper for native and nativesdk
The create_wrapper functions of utils.bbclass cause implicit
dependencies on bash, which may not be suitable for deployment on
target. Besides, the wrapper doesn't seem to be necessary on target.
Signed-off-by: Olof Johansson <olofjn@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stefan Stanacar [Tue, 3 Sep 2013 13:01:11 +0000 (16:01 +0300)]
lib/oeqa/runtime: smart: serve repo on host ip only and increase timeout
Don't start the http server on 0.0.0.0, listen on host ip (end of tap interface) only.
Also use the timeout option (default is 300s for ssh commands) for all the commands
run in this module (mostly because smart update timeouts on mips).
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 2 Sep 2013 12:11:24 +0000 (13:11 +0100)]
pulseaudio: disable GTK+ by default
PulseAudio's GTK+ support is limited to a test case and automatic icon name
population for applications. This is too limited to enforce GTK+ 3 on all
builds, so disable it by default.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 2 Sep 2013 10:25:10 +0000 (11:25 +0100)]
elfutils: Drop do_autoreconf patches
The do-autoreconf patches only change generated files. We run autoreconf ourselves
so we don't need these patches. Worse, they cause failures since the do_patch
task can't rerun after configure since the files change and the patch is no longer
clean.
Drop the patches since we don't need them.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 2 Sep 2013 10:35:14 +0000 (11:35 +0100)]
runqemu: set memory size to 256M for most qemu machines
Set memory size to 256M for qemuarm, qemux86, qemux86-64, qemumips,
qemumips64, and qemuppc.
This allows the smart automated tests to run on machines with a GUI
environment (such as Sato) running at the same time, for which 128M is
too limiting. Setting this in runqemu allows users manually using
runqemu to avoid the same out-of-memory issues under similar conditions
using smart, on-target compilation or other uses.
Fixes [YOCTO #5045].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 1 Sep 2013 15:19:32 +0000 (16:19 +0100)]
sanity: Don't make assumptions about cwd
When using the recently fixed out of build directory bitbake invocations, I was
puzzled why bitbake seemed to be pausing. The reason was due to running the sanity
tests each and every time. This was due to current working directory assumptions
within the sanity test code. Fix this to use TOPDIR.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 1 Sep 2013 07:52:40 +0000 (08:52 +0100)]
meta: Don't use deprecated bitbake API
These have been deprecated for a long time, convert the remaining
references to the correct modules and prepare for removal of the
compatibility support from bitbake.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stefan Stanacar [Fri, 30 Aug 2013 16:48:53 +0000 (19:48 +0300)]
lib/oeqa/runtime: ping: fix ping false fail
We run the ping test as soon as we reach the login prompt.
But sometimes (seen in sato systemd) we end up with link down/link up stuff like:
qemux86-64 login: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
The logic behind ping -w 30 -c 1 was to wait at most 30 seconds
for at least one reply, but there is a catch: reply doesn't seems
to be echo reply but any reply (non-reply means loss not network error)
ping's man page:
-w deadline
Specify a timeout, in seconds, before ping exits regardless of
how many packets have been sent or received. In this case ping
does not stop after count packet are sent, it waits either for
deadline expire or until count probes are answered or for some
error notification from network.
Just when the link up/link down happens ping returns:
From 192.168.7.1 icmp_seq=1 Destination Host Unreachable
--- 192.168.7.2 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
and exits sooner than the 30 seconds timeout.
This patch should do what was originally intended (wait at most
30 seconds for at least one reply).
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Roy.Li [Wed, 28 Aug 2013 02:36:27 +0000 (10:36 +0800)]
btrfs-tools: Add dependency on lzo acl e2fsprogs
Add dependency on lzo acl e2fsprogs to fix the below building failure
1. commit b268a417259b9[add lzo compression support to restore] needs lzo
cmds-restore.c:30:25: fatal error: lzo/lzoconf.h: No such file or directory
2. btrfs-tools includes <sys/acl.h> which is provided by acl
btrfs-convert.c:32:21: fatal error: sys/acl.h: No such file or directory
3. btrfs-tools always needs e2fsprogs
btrfs-convert.c:44:28: fatal error: ext2fs/ext2_fs.h: No such file or directory
* fix the segfault issue of dd on e500v2 targets
Since double-float is disabled for e500v2 targets build due to ICE of gcc-4.8.1,
accordingly %Ld format of sprintf is disabled.
Address Bug 4910 - [p1022ds]urandom: segmentation fault
Chen Qi [Wed, 28 Aug 2013 02:52:03 +0000 (10:52 +0800)]
runqemu-ifdown: clean up the remaining iptables rules
The iptables rules for the tap interface are added by runqemu-ifup
everytime we use runqemu to start a qemu target. But it's not cleaned
up when runqemu exits.
This patch cleans up the remaining iptables rules for the tap interface
in runqemu-ifdown.
[YOCTO #5047]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Wed, 28 Aug 2013 02:52:05 +0000 (10:52 +0800)]
runqemu-internal: provide more info if a preconfigured tap is used
We should provide the user more information if a preconfigured tap
is used. This is because the user might have manually set up the tap
interface to be used by other qemu binaries.
So at a minimum, we should let the user know how to make runqemu skip
that tap interface.
[YOCTO #5047]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Wed, 28 Aug 2013 02:52:04 +0000 (10:52 +0800)]
runqemu-internal: don't bring down preconfigured tap interface
runqemu-ifup and runqemu-ifdown should be pairs. If we're using a
preconfigured tap interface, the runqemu-ifdown should not be invoked
to bring it down.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Run list-packageconfig-flags.py on wrlinux's platform in which
the oe-core layer and bitbake layer in different directories:
----
../layers/oe-core/scripts/contrib/list-packageconfig-flags.py
Traceback (most recent call last):
File "../layers/oe-core/scripts/contrib/list-packageconfig-flags.py", line 28, in <module>
import bb.cache
ImportError: No module named bb.cache
----
The script import bb module from bitbake lib dir, the previous
lib dir was hardcode and only worked on poky but not for others.
In this situation, look for bitbake/bin dir in PATH could fix this issue.
[YOCTO #5060]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gtk+3: pull forward the gtk+2 hardcoded libtool patch
Without this, it tries to run ./libtool, not the sys-prefixed libtool, which
fails, resulting in dynamic modules being disabled, which in turn results in
compiling the immodules directly into the gtk+3 library.
I tried switching it to using $LIBTOOL rather than hardcoding the path, as
LT_INIT sets LIBTOOL, but it didn't work, I didn't have time to dig further,
and this gets the job done for now.
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jackie Huang [Fri, 30 Aug 2013 01:56:36 +0000 (09:56 +0800)]
remove the unnecessary protocol parameters
It's not necessary to specify the protocol parameter when it's the
default protocol for the fetcher, e.g. the default protocol for
git fetcher it git, "protocol=git" isn't needed.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stefan Stanacar [Fri, 30 Aug 2013 09:24:32 +0000 (12:24 +0300)]
lib/oeqa: move skeletoninit.py where it belongs
OE-core commit fcc59cbcdb1550489d372edf9f465efa7165245f /
poky commit 748ddc39e56623f4e48987f0467f4722f6e162f2 added a new test, but
in the wrong location.
I took the patch from Alex's branch but renamed it from meta/lib/oeqa/runtime/skeleton.py to meta/lib/oeqa/skeletoninit.py before sending. This was
unintentional, it should have been under meta/lib/oeqa/runtime.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Zhang Xiao [Tue, 27 Aug 2013 02:07:43 +0000 (10:07 +0800)]
libnfsidmap: Add and modify idmapd.conf
add configuration file to make rpc.idmapd to not report below error:
rpc.idmapd: Skipping configuration file "/etc/idmapd.conf": No such file or directory
rpc.idmapd: Could not find group "nobody"
Paul Eggleton [Wed, 28 Aug 2013 15:39:19 +0000 (16:39 +0100)]
busybox: set default log buffer size to 64 at compile time
This provides a more reasonable log buffer size to avoid losing earlier
events, and 64K is not a problem for modern systems. When the buffer is
used on sysvinit-based systems, which it isn't by default, 64K is already
the runtime default size unless /etc/syslog-startup.conf is modified or
deleted, so this only really affects systems using systemd. This
completely removes the need for the busybox bbappend in meta-oe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stefan Stanacar [Sun, 25 Aug 2013 00:46:55 +0000 (01:46 +0100)]
classes/testimage: add support for finding tests in other layers
A layer can add tests in lib/oeqa/runtime (provided it extends BBPATH as
normal) and enable them with TEST_SUITES_append = " testname". Test
module names shouldn't collide though.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Stefan Stanacar [Wed, 28 Aug 2013 10:52:09 +0000 (13:52 +0300)]
classes/testimage: increase default boot timeout
While I can't reproduce on local builds, sometimes images fail
to boot on AB (which runs many builds at once). Assuming
there isn't something weird going on, let's just give it more time.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Stefan Stanacar [Wed, 28 Aug 2013 09:56:45 +0000 (12:56 +0300)]
lib/oeqa/runtime: remove some unnecessary checks from setUpModule
These checks are unnecessary.
setUpModule is run when a module is loaded and we
shouldn't run commands on the target here, (plus if
ssh doesn't work we error out in setup multiple times, instead
of skipping the real test, which might depend on test_ssh).
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Bruce Ashfield [Wed, 28 Aug 2013 20:12:19 +0000 (16:12 -0400)]
linux-yocto/3.10: fix ssh login and restore CC_OPTIMIZE_FOR_SIZE
Updating the BSP SRCREVs with the following changes:
7144bcc Revert "timer_list: Split timer_list_show_tickdevices" 1c0d1d8 Revert "timer_list: Convert timer list to be a proper seq_file"
To temporarily fix the ability to log in via ssh on some host/image combinations.
Updating the meta SRCREV for:
cd502a8 meta/standard: standard configuration fragment must be first
Which was incorrectly overriding feature and arch configuration values.
[YOCTO #5064]
[YOCTO #5062]
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mihai Prica [Tue, 27 Aug 2013 14:12:05 +0000 (14:12 +0000)]
midori: add version 0.5.5 from meta-gnome
Midori is a lightweight web browser that uses the WebKit
rendering engine and the GTK interface. This allows a more
easy testing of the functionality of webkit-gtk component
that is already in oe-core.
Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mihai Prica [Tue, 27 Aug 2013 14:14:13 +0000 (14:14 +0000)]
python-docutils: add version 0.11 from meta-oe
Docutils is a text processing system for processing plaintext
documentation into useful formats(HTML, XML, man-pages). This is
required by the Midori web-browser.
* Update 0.5 from meta-oe to 0.11.
Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joe Slater [Mon, 26 Aug 2013 23:38:45 +0000 (23:38 +0000)]
dpkg: fix configuration issue for mips64
CQID: 431771
configure cannot determine the proper cpu, os, or
architecture for mips64, and possibly other arch's,
because of faulty code added to Arch.pm in the latest
release from upstream. We remove that code.
Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Thu, 22 Aug 2013 02:16:30 +0000 (02:16 +0000)]
systemd: Upgrade to 206
Add new PACKAGE systemd-rpm-macros, this will hold
the macros which are interesting when rpm is used as
package management backend
Forward port uclibc only patches. Add a new patch
to stub out use of preadv/pwritev in testcases
Delete patches that have been merged upstream in systemd
Remove force export of GPERF variable in environment
this was causing AC_CHECK_TOOL to not populate GPERF
variable as expected
systemd needs kmod to be present on rootfs so add it
to RDEPENDS
some services substitute discovered kmod when the service
file is generated during boot, however the discovered kmod
is from native sysroot and it gets into the service file
with absolute path. So specify the target path of kmod using
KMOD variable so the unit files have correct pointer to kmod
on target
Add a patch to make sure that mknod capability is checked
before the service which excercise mknod, this patch is also
submitted to upstream systemd
Bruce Ashfield [Mon, 26 Aug 2013 21:47:20 +0000 (21:47 +0000)]
linux-yocto: add bc-native dependency, and move to linux-yocto.inc
As reported by Martin Jansa <martin.jansa@gmail.com>, the following error happens
when building in a minimal environment:
| BC kernel/timeconst.h
| /bin/sh: bc: command not found
| make[3]: *** [kernel/timeconst.h] Error 127
| make[2]: *** [kernel] Error 2
| make[2]: *** Waiting for unfinished jobs....
kernel commit 70730bca [kernel: Replace timeconst.pl with a bc script] added
a kernel dependency on bc. To support the build of linux-yocto recipes in
these configurations, we add bc-native to the common dependencies.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Mon, 26 Aug 2013 17:28:29 +0000 (17:28 +0000)]
kern-tools: fix patch series to git tree validation
Previous changes to the kern-tools improved functionality to ensure that
as a series is considered, it is checked against the tree to confirm that
all patches are really applied.
There was a bug in the subject based detection, such that the first matching
patch was take, and not the last. This change ensures that we start from
the end of a series, not the start.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
and returns a 0 exit code (it thinks it succesfully removed the package,
when in reality it didn't), so we need to catch those specifically.
Also, sometimes output from download command is:
Saving cache...http://192.168.7.1:49456/rpm/x86_64_x32/psplash-default-0.1+git0+afd4e228c6-r15.x86_64_x32.rpm
and that tricks our smart download test, so use a regex there.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Chen Qi [Mon, 26 Aug 2013 06:43:55 +0000 (14:43 +0800)]
read-only-rootfs-hook.sh: check before bind mounting /var/lib
It's possible that /var/lib is on a separate writable partition. In such
situation, we should not bind mount /var/lib with tmpfs, becasue it's
already writable.
This patch fixes this problem by checking whether /var/lib is already
on a writable partition.
[YOCTO #4888]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Mon, 26 Aug 2013 06:43:54 +0000 (14:43 +0800)]
checkroot.sh: check for conflicting configurations
In our current boot scripts, two ways are used to determine whether
the rootfs is read-only or not. One by checking the READ_ONLY_ROOTFS
value in /etc/default/rcS, the other by checking the /etc/fstab entry.
>From a normal Linux user's point of view, the way of checking the
/etc/fstab entry is preferred. However, as there are several boot scripts
that need to know whether rootfs is read-only or not, checking /etc/fstab
in each script brings too much overhead. Thus, these boot scripts
use the READ_ONLY_ROOTFS value in /etc/default/rcS.
In normal use cases, there would be no problem, as both /etc/default/rcS and
the /etc/fstab are modified at rootfs time. However, if the user changes
the mount option for rootfs in /etc/fstab to read-write, and he/she forgets
to change the value in /etc/default/rcS, there would be unexpected results.
For example, the udev-cache would still be disabled.
So at a minimal, a check for conflicting configurations between /etc/fstab
and /etc/default/rcS should be added in checkroot.sh so that there would be
reasonable warnings if users have configured the system in a non-consistent
way.
[YOCTO #4880]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
liangcao [Fri, 23 Aug 2013 21:40:35 +0000 (14:40 -0700)]
SPDX:real-time license scanning and SPDX output.
SPDX integrates real-time license scanning, generates
SPDX standard output and license verification
information during the OE-Core build process. The
existing module includes scanning patched packages
and creating package and file level SPDX documents.
