Bogdan Marinescu [Mon, 14 Jan 2013 13:29:09 +0000 (15:29 +0200)]
oprofile: set correct kernel path
oprofile's "configure" was always looking at the configuration of the host
kernel, not the target kernel. This patch instructs oprofile to use the
target kernel to configure itself.
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Fri, 18 Jan 2013 23:13:38 +0000 (17:13 -0600)]
update-alternatives: Add a build-time dependency
We need to add a build time dependency on virtual/update-alternatives,
however we can't just do DEPENDS +=, or we end up with various problems. To
work around this, in the anonymous python space we ensure we only do the
addition when the package does not provide virtual/update-alternatives and
it is a target package.
Also the system wide PREFERRED_PROVIDER was incorrect. It references a
runtime package, and not the recipe it should have. This has been corrected.
[YOCTO #3691]
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Tested-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Fri, 18 Jan 2013 23:13:37 +0000 (17:13 -0600)]
populate_sdk_rpm: Re-add a few system provides to the SDK
When building the target SDK portion, we can safely ignore various
package rdepends. These dependencies are not required on a build
only environment like an SDK.
[YOCTO #3691]
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Tested-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I found that if I had two packages architectures built (say core2 and i586),
that the shlibs data from i586 was being used in the core2 build. This
lead to odd dependency issues if the i586 build was out of date and core2
was being targetted.
When loading shlibs files, the last loaded wins so we need to iterate the
lists from least to strongest weighting, not the other way around. With this
patch applied, the contamination issue is resolved.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dropbear: Deal with truncated host keys by removing them
Dropbear does not start when the host key is empty and it is possible
that a device is switched off before the host key is generated. This
is possible because the dropbearkey code doesn't create a temporary
file first. Detect truncated keys and then remove them which will lead
to the re-generation. This way the dropbear process will always start.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jason Wessel [Sat, 19 Jan 2013 15:18:50 +0000 (09:18 -0600)]
populate_sdk_base.bbclass: Work around bugs with gnu tar < 1.24
The gnu tar versions less than 1.24 pose a problem with the SDK
extraction. A typical SDK will have hard links. The SDK is created
with a newer version of tar but extracted with the host version of tar
which may be much older. The specific defect is that older version of
gnu tar do not properly handle the "--strip-components=" argument when
processing hard links and the paths do not get properly truncated and
hooked up with the corresponding real file payloads. This leads to
errors like the following during the SDK install:
tar: sysroots/qemux86-yocto-linux/usr/bin/getconf: Cannot hard link to `./opt/yocto/SDK-qemux86/sysroots/qemux86-yocto-linux/usr/bin/POSIX_V6_ILP32_OFFBIG': No such file or directory
The simple way to work around the problem is to just not save the path
information that is going to get chopped off anyway. This has the
added benefit that it saves a small amount of space in the tar archive
as well.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patch avoids the 'PKGV = "cleanup(${PV})"' operation and replaces
AUTOINC directly within PKGV. This might introduce a regression too
when 'AUTOINC' is added to PKGV intentionally but impact is small and
can be fixed trivially by using another string.
Signed-off-by: Enrico Scholz <enrico.scholz@informatik.tu-chemnitz.de> Cc: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta branch to import the following commits that cleanup and
reorganize the features that make up the graphics features of the Intel
BSPs
c0b3904 meta: add config fragment for gma600 graphics driver f41638f meta: add config fragment for gma500 graphics driver ff8ad3e meta: sys940x: drop vesa fragment from bsp config fcb82ac meta: sys940x: remove emgd config from bsp config c1677bb meta: fri2: drop vesa fragment from bsp config 7324440 meta: fri2: remove emgd config from bsp config dd435c6 meta: emenlow: drop vesa fragment from bsp config 243b515 meta: emenlow: remove emgd config from bsp config 3e1be82 meta: crownbay: drop vesa fragment from bsp config fc5ed4e meta: crownbay: remove emgd config from bsp config d46236b meta: drm-emgd.cfg: add configs for dependent routines db4bc5e meta: relocate git-merge of emgd branch
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Sat, 19 Jan 2013 22:40:03 +0000 (14:40 -0800)]
kernel.bbclass, module-base.bbclass: Use CC to form KERNEL_CC
kernel compiler is not special and we currently have it so
we want to pass -march and -mtune options as CFLAGS to kernel
build so that compiler picks the right subarch flags when
compiling assembly files in particular. Otherwise defaults
are chosen which may not be right in many case e.g. when
compiling kernel for collie machine we should use arch=armv4
but it uses toolchain/as defaults which is armv5te
in some case e.g. thumb1 we know that kernel can not be compiled
in thumb1 mode so we can provide that information e.g. -marm
option through KERNEL_HOST_CC_ARCH variable as we do now
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Donnelly [Sat, 19 Jan 2013 22:47:11 +0000 (22:47 +0000)]
base-files: add fstab for systemd based systems
The default fstab has entries which are not necessary
in systemd based systems so add a simpler default in
this case.
Signed-off-by: Martin Donnelly <martin.donnelly@ge.com> Signed-off-by: Radu Moisan <radu.moisan@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Radu Moisan [Sat, 19 Jan 2013 22:47:10 +0000 (22:47 +0000)]
update-rc.d: disable update-rc.d.bbclass when systemd enabled
update-rc.d is not necessary when systemd is enabled,
systemctl is the replacement
Signed-off-by: Radu Moisan <radu.moisan@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Radu Moisan [Sat, 19 Jan 2013 22:47:08 +0000 (22:47 +0000)]
default-providers: Add systemd option to PREFERRED_PROVIDER_udev
Signed-off-by: Radu Moisan <radu.moisan@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Radu Moisan [Sat, 19 Jan 2013 22:47:07 +0000 (22:47 +0000)]
systemd: add systemd recipes
Add systemd recipes and associated support recipes.
Mostly based on meta-oe/meta-systemd, so almost all credit should go to:
Andreas Müller <schnitzeltony@googlemail.com>
Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Holger Hans Peter Freyther <holger@moiji-mobile.com>
Khem Raj <raj.khem@gmail.com>
Koen Kooi <koen@dominion.thruhere.net>
Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Radu Moisan <radu.moisan@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Radu Moisan [Sat, 19 Jan 2013 22:47:05 +0000 (22:47 +0000)]
default-providers: Automatically set PREFERRED_PROVIDER_udev
This is a more generic way to set preferred provider for udev.
We expect to have multiple choices once we integrate other init
managers, and this way we can automatically set it considering
distro settings.
Signed-off-by: Radu Moisan <radu.moisan@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Radu Moisan [Sat, 19 Jan 2013 22:47:04 +0000 (22:47 +0000)]
default-distrovars: Add DISTRO_FEATURES_INITMAN to DISTRO_FEATURES
This is a more generic way to set the init manager since we
plan to support other init managers as well.
I will use this variable as a switch to turn on/off any
init scheme that we might support in the future.
By default we use sysvinit.
Signed-off-by: Radu Moisan <radu.moisan@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 18 Jan 2013 05:19:32 +0000 (00:19 -0500)]
guilt: add git 1.8.x support
Updating guilt to allow git 1.8.x as a supported version. This version has
no impact on other functionality within the scripts, so no other adjustments
are necessary.
[YOCTO #3275]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The pristine patch queue can be seen on the "ltsi" branch in the repository.
This branch has been merged into the standard/base branch of linux-yocto-3.4
and to all BSP branches in the tree.
LTSI based BSPs or features are not activated as part of this commit, they
are controlled by the meta branch of the kernel repository and are activated
in separate patches.
[YOCTO #2396]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 18 Jan 2013 05:19:30 +0000 (00:19 -0500)]
linux-yocto/routerstationpro: enable GPIO_SYSFS
We had a request to enable GPIO_SYSFS to allow easy use of the available
GPIOs in the board out of the box. This is a simple / contained config item
to enable, so there's no reason not to.
[YOCTO #3519]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 18 Jan 2013 05:19:29 +0000 (00:19 -0500)]
linux-yocto/meta: update include statements to explicit .scc format
The kernel tooling can support a "shorthand" method of including other features
that doesn't require the full filename ending in .scc. This format is confusing
when compared to the source tree, and is inconsitently use. This commit updates
all shorthand includes to a full "include <foo>.scc" format.
[YOCTO #3418]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 18 Jan 2013 05:19:28 +0000 (00:19 -0500)]
kernel-yocto: add KBUILD_OUTPUT to OE_TERMINAL_EXPORTS
Since linux-yocto based recipes have a split build and source directory,
we should export KBUILD=${B} to the devshell. This allows the kernel to
be incrementally build within the shell and not dirty the source
directory (which breaks subsequent full builds).
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 18 Jan 2013 05:19:27 +0000 (00:19 -0500)]
linux-yocto: normalize repository naming and SRC_URI options
linux-yocto-tiny and linux-yocto had minor differences from the rest
of the linux-yocto recipes. After this commit, all the recipes are
using bareclone=1 and repository names that end with .git.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 18 Jan 2013 05:19:26 +0000 (00:19 -0500)]
kernel-yocto: remove unnecessary non-bare warning
In the past working from a non-bare clone would cause problems,
due to branches not existing in the WORKDIR clone. This hasn't
been true for some time, since the routines which convert remotes
into local branches have been functioning without problems.
So we no longer need the warning and it can be removed.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Laurentiu Palcu [Thu, 17 Jan 2013 14:58:45 +0000 (16:58 +0200)]
hostap-conf: remove dependencies of update-modules
Also:
* install the alias file in the correct /etc/modprobe.d directory since
this is the directory used by modprobe now;
* rewrite the alias file to be up-to-date with modprobe's syntax;
* remove the postinst/postrm scriptlets because this is just an alias
file;
[YOCTO #3598]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Laurentiu Palcu [Thu, 17 Jan 2013 14:58:44 +0000 (16:58 +0200)]
orinoco-conf: remove dependencies of update-modules
Since update-modules became obsolete, no need for these dependencies.
Also:
* install the conf files in the modprobe.d directory. /etc/modutils is
also obsolete;
* remove postinst/postrm scriptlets since they ran update-modules and
this is just an alias file;
[YOCTO #3598]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Laurentiu Palcu [Thu, 17 Jan 2013 14:58:43 +0000 (16:58 +0200)]
modutils-initscripts: improve modutils.sh
modutils.sh reads /etc/modules to load the listed modules at boot time.
/etc/modules is generated by update-modules which scans
/etc/modules-load.d directory. However, update-modules became obsolete
because the files it generates are not used by modprobe anymore.
Hence, change modutils.sh to scan also /etc/modules-load.d/*.conf and
load the modules listed there.
Basically, the behavior is this:
* if /etc/modules exists, load those modules;
* if the directory /etc/modules-load.d exists, load the modules listed
in the .conf files but ignore those already loaded (from
/etc/modules);
[YOCTO #3598]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
udevd isn't on $PATH and is in different places depending on what version of
udev is being used. Copy the code from initramfs-framework to search for the
right udevd at boot time instead of hard-coding a location.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Constantin Musca [Thu, 17 Jan 2013 15:53:39 +0000 (17:53 +0200)]
pango: use qemu_run_binary instead of pango-native
- use qemu_run_binary from qemu.bbclass to run pango-querymodules
- remove pango-native from DEPENDS in order to do not create
unbuildable dependency chains (e.g. ['gtk+', 'pango', 'pango-native',
'cairo-native', 'directfb-native'])
[YOCTO #3642]
Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
base.bbclass: improve the incompatible license logic a bit
Handle the potential case where the recipe level LICENSE contains an
incompatible license, but all of its emitted packages are in fact compatible.
Without this adjustment, it would skip such a recipe.
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
base.bbclass: use debug messages for INCOMPATIBLE_LICENSE
Spamming potentially over a screenful of messages due to their
INCOMPATIBLE_LICENSE selection seems a bit unnecessary. If the distro was
configured that way, the user likely won't care, and if the user set it, they
likely know the implications, so make the messages debug instead.
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Wed, 16 Jan 2013 17:00:12 +0000 (17:00 +0000)]
classes/image: improve debug-tweaks ssh server configuration
Create a single postprocessing function that enables no-password logins
for both openssh and dropbear when debug-tweaks is in IMAGE_FEATURES,
changing its behaviour slightly:
* Run it regardless of whether ssh-server-* are in IMAGE_FEATURES so
that it still takes effect if these are installed by adding
dropbear/openssh to IMAGE_INSTALL.
* Enable it to be run from image.bbclass rather than core-image.bbclass
so that it works for images that are using the former.
Second half of the fix for [YOCTO #2578].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Paul Eggleton [Wed, 16 Jan 2013 17:00:11 +0000 (17:00 +0000)]
dropbear: allow configuring blank password option at runtime
Instead of using IMAGE_FEATURES to control something within a recipe,
allow this to be set at runtime, avoiding the need to rebuild dropbear
when we want to change this option.
First half of the fix for [YOCTO #2578].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Paul Eggleton [Wed, 16 Jan 2013 18:09:27 +0000 (18:09 +0000)]
classes/rootfs_*: error out if postinstalls exist with read-only rootfs
If there are postinstall scripts to be run on first boot and
IMAGE_FEATURES contains "read-only-rootfs", we know this will fail on
the target device so just error out during do_rootfs. This check was
already implemented for ipk, so add it to the deb and rpm backends. Also
make all backends use bberror rather than just echo to display the
error.
Fixes [YOCTO #3407].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Without this, we have excessive dependencies leaking into the build. In
particular, glib-2.0 was sucking in python modules even if ptest wasn't in
DISTRO_FEATURES.
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Wayland is a protocol for a client application to display user interface windows
through the use of a compositing window manager. This package include the
specific set of server-side and client-side C libraries that implement the
protocol.
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Thu, 17 Jan 2013 15:24:58 +0000 (16:24 +0100)]
kernel.bbclass: don't depend on DATETIME
* http://cgit.openembedded.org/openembedded-core/commit/?id=67e77cd948c69798695d5d5f34163ef89339b35a
moved DATETIME dependency from MODULE_TARBALL_BASE_NAME to MODULE_IMAGE_BASE_NAME
but without copying that vardepsexclude
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Wed, 16 Jan 2013 15:37:22 +0000 (09:37 -0600)]
lttng-ust: bump PE
The previous lttng-ust had a PE of "1" - that recipe was removed and
replaced with the lttng2-ust recipe, which was renamed back to
lttng-ust. The new recipe had didn't define a PE so got the default
PE of 0 - this adds the PE back and gives it a value of "2", which
reflects the history and fixes the following error:
ERROR: Package version for package lttng-ust went backwards which
would break package feeds from (1:0.16-r1 to 0:2.1.0-r0)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
at do_rootfs time in package postinstall stage, when
/path/to/target/rootfs/etc/init.d/basename is a symlink and points to some path
on target (for example: /etc/init.d/basename.some_package), would fail and the
postinstall execution would be postponed for first boot, on target.
This patch adds the posibility to verify whether the file the symlink
points to actually exists in the target rootfs.
[YOCTO #3716]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Marko Lindqvist [Tue, 15 Jan 2013 19:36:46 +0000 (21:36 +0200)]
apmd: fix license segment md5sum boundary
Replaced incorrect "firstline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Marko Lindqvist [Tue, 15 Jan 2013 19:36:23 +0000 (21:36 +0200)]
dbus: fix license segment md5sum boundary
Replaced incorrect "firstline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Marko Lindqvist [Tue, 15 Jan 2013 19:35:59 +0000 (21:35 +0200)]
libidn: fix license segment md5sum boundary
Replaced incorrect "firstline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Marko Lindqvist [Tue, 15 Jan 2013 19:35:36 +0000 (21:35 +0200)]
gperf: fix license segment md5sum boundary
Replaced incorrect "firstline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Marko Lindqvist [Tue, 15 Jan 2013 19:35:14 +0000 (21:35 +0200)]
ethtool: fix license segment md5sum boundary
Replaced incorrect "firstline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Marko Lindqvist [Tue, 15 Jan 2013 19:34:49 +0000 (21:34 +0200)]
shadow: fix license segment md5sum boundary
Replaced incorrect "firstline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Marko Lindqvist [Tue, 15 Jan 2013 19:34:29 +0000 (21:34 +0200)]
iptables: fix license segment md5sum boundary
Replaced incorrect "firstline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Marko Lindqvist [Tue, 15 Jan 2013 19:34:04 +0000 (21:34 +0200)]
gzip: fix license segment md5sum boundary
Replaced incorrect "firstline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Marko Lindqvist [Tue, 15 Jan 2013 11:52:11 +0000 (13:52 +0200)]
curl: fix build with automake-1.13
Add obsolete_automake_macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.
Remove AC_CONFIG_MACRO_DIR override that caused aclocal to fail
since it didn't get m4-directory information.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Cristian Iorga [Tue, 15 Jan 2013 20:08:46 +0000 (22:08 +0200)]
connman-conf: configures connman in qemu machines
For qemu machines, connman should not configure
virtual wired interfaces. Wired interfaces (eth0)
are assigned static IP addresses by the virtual machine
manager (qemu). This packages places the eth0 interface in
a list of blacklisted interfaces, forbiding connman
administering wired interfaces for qemu machines.
Andrei Dinu [Tue, 15 Jan 2013 09:58:55 +0000 (11:58 +0200)]
Removed undisplayed picture from connman-gnome
- removed the picture that doesn't display in the
connman-gnome "about" section.
- updated the recipe to use the patch when running bitbake
- created a folder with patches named "connman-gnome",
the same as for connman.
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Tom Zanussi [Fri, 11 Jan 2013 23:28:48 +0000 (17:28 -0600)]
recipes-kernel/lttng-2.0: rename to recipes-kernel/lttng
recipes-kernel/lttng was removed by a previous patch, which also
removed the naming conflict that caused the lttng-2.0 version of lttng
to be named recipes-kernel/lttng-2.0. Since the naming conflict has
disappeared, we can go back to the simpler naming.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Tom Zanussi [Fri, 11 Jan 2013 23:28:47 +0000 (17:28 -0600)]
lttng2-ust: rename to lttng-ust
recipes-kernel/lttng/lttng-ust was removed by a previous patch, which
also removed the naming conflict that caused the lttng-2.0 version of
lttng-ust to be named lttng2-ust. lttng2-ust was the only lttng-2.0
recipe to be named in this way and since that was entirely due to the
conflict, we can go back to the consistent naming for it.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Tom Zanussi [Fri, 11 Jan 2013 23:28:46 +0000 (17:28 -0600)]
lttng: remove 'legacy' lttng
This removes 'legacy' lttng - it hasn't actually worked for awhile
now, and has been replaced by equivalent functionality in
recipes-kernel/lttng-2.0 (which will be renamed to lttng in a
follow-up patch).
Fixes [YOCTO #3303].
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Saul Wold [Fri, 11 Jan 2013 23:03:54 +0000 (15:03 -0800)]
xz: LICENSE field is wrong
xz contains a GPLv3 m4 macro which is used at build time, this does not make
the installed or runtime items GPLv3, which is what the LICESNE field pertains
to, therefor remove it from the LICENSE field.
Emilia Ciobanu [Mon, 14 Jan 2013 09:04:33 +0000 (11:04 +0200)]
distrodata: Updated checkpkg task
bitbake -c checkpkg fetches the latest version for all packages,
including the ones from sourceforge and those that have
ununsual package naming.
Also removed all pn-native/nativesdk-pn entries from the resulting
checkpkg.csv file if the system already reported the latest version
for pn.
Eric Bénard [Fri, 11 Jan 2013 13:51:25 +0000 (14:51 +0100)]
add meta-toolchain-qt
- this allows the creation of a SDK containing all the needed
libraries to develop QT4 for X applications
- the recipes were factorized to share as much code as possible
- binaries generated using the toolchain were run tested on an
ARMv7 target
- both qt & qte toolchains were build tested for qemuarm target
and for an ARMv7 target
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
